Kletetzka, Ivo, Fabian Neitzel, and Hans-Joachim Schmid. “Assessing the Impact of the Powder Production Method on Ceramic-Filled Polyamide Composites Made by Laser Sintering.” In Proceedings of the 34th Annual International Solid Freeform Fabrication Symposium, edited by Joseph Beaman, Vol. 34. Austin: Laboratory for Freeform Fabrication and University of Texas, 2023.

Beimdiek, Janis, Sascha Schiller, and Hans-Joachim Schmid. “Entrained Flow SCR Using an In-Situ Synthesis of Catalyst Particles for a Combined Flue Gas Cleaning System.” Düsseldorf: VDI Verlag, 2023.

Kletetzka, Ivo, Fabian Neitzel, and Hans-Joachim Schmid. “Assessing the Impact of the Powder Production Method on Ceramic-Filled Polyamide Composites Made by Laser Sintering.”https://doi.org/10.26153/tsw/50931__In Proceedings of the 34th Annual International Solid Freeform Fabrication Symposium, edited by Joseph Beaman. Laboratory for Freeform Fabrication and University of Texas, Austin, 2023.https://doi.org/10.26153/tsw/50931 .

Neitzel, Fabian, Ivo Kletetzka, and Hans-Joachim Schmid. “Halogen-Free Flame Retardant Powder Materials for Laser Sintering: Evaluation and Process Stability Analysis.”https://doi.org/10.26153/tsw/50926__In Proceedings of the 34th Annual International Solid Freeform Fabrication Symposium, edited by Joseph Beaman. Laboratory for Freeform Fabrication and University of Texas, Austin, 2023.https://doi.org/10.26153/tsw/50926 .

Beimdiek, Janis, Friedrich Prill, Mario König, Mirjam Müller, Ingo Hartmann, and Hans-Joachim Schmid. “Combined Filtration Process for Biomass Combustion Plants to Comply with Legal Requirements (Presentation).” In 13th World Filtration Congress Proceedings, 2022.

Klippstein, Sven Helge, and Hans-Joachim Schmid. “Powder Spread Flaws in Polymer Laser Sintering and Its Influences on Mechanical Performance.” In Proceedings of the 33nd Annual International Solid Freeform Fabrication Symposium. Austin, TX, USA, 2022.

Kletetzka, Ivo, Roland Gawlikowicz, and Hans-Joachim Schmid. “Effects of Spherical Fillers on the Processability and Mechanical Properties ofhttp://dx.doi.org/10.26153/tsw/44558__and PP-Based LS Dry Blends.”http://dx.doi.org/10.26153/tsw/44558__In Proceedings of the 33th Annual International Solid Freeform Fabrication Symposium, Vol. 33. Austin: Laboratory for Freeform Fabrication and University of Texas, 2022.http://dx.doi.org/10.26153/tsw/44558 .

Kletetzka, Ivo, Sven Helge Klippstein, and Hans-Joachim Schmid. “Shelf Life of Polyamide 12 () Laser Sintering Powder.”http://dx.doi.org/10.26153/tsw/44555__In Proceedings of the 33th Annual International Solid Freeform Fabrication Symposium, Vol. 33. Austin: Laboratory for Freeform Fabrication and University of Texas, 2022.http://dx.doi.org/10.26153/tsw/44555 .

Ponusamy, SathishKumar. Pulverherstellung und Verrundung neuer Polymermaterialien für das selektive Lasersintern (SLS) - Poster, 2021.

Menge, Dennis, and Hans-Joachim Schmid. “Low Temperature Laser Sintering on a Standard System: First Attempts and Results with P,” 2021.

Pawelczyk, Sebastian, Steffen Jesinghausen, and Hans-Joachim Schmid. Charakterisierung des Fließverhaltens von Frischbeton – Entwicklung eines adaptiven Rheometers (ACCR) und Einfluss von Maßnahmen zur Sedimentationsprävention. Digitales Jahrestreffen der ProcessNet Fachgruppen MPH und CFD, 2021.

Kletetzka, Ivo, Christina Kummert, and Hans-Joachim Schmid. “Laser Sintering Design Guidelines for Media Transmitting Components.”http://dx.doi.org/10.26153/tsw/17548__In Proceedings of the 32nd Annual International Solid Freeform Fabrication Symposium, Vol. 32. Austin: Laboratory for Freeform Fabrication and University of Texas, 2021.http://dx.doi.org/10.26153/tsw/17548 .

Kummert, Christina, Wolfgang Diekmann, Katrin Tews, and Hans-Joachim Schmid. “Influence of Part Microstructure on Mechanicl Properties of PX Laser Sintered Specimens.”http://utw10945.utweb.utexas.edu/sites/default/files/2019/063%20Influence%20of%20Part%20Microstructure%20on%20Mechanical%20Pro.pdf__In 29th Annual International Solid Freeform Fabrication Symposium, 29:735–44, 2020.http://utw10945.utweb.utexas.edu/sites/default/files/2019/063%20Influence%20of%20Part%20Microstructure%20on%20Mechanical%20Pro.pdf .

Klippstein, Sven Helge, and Hans-Joachim Schmid. “Methodik Zur Qualifizierung Des Lasersinter Prozesses Für Die Serienfertigung.”https://doi.org/10.3139/9783446462441.025__In Proceedings of the 16th Rapid.Tech Conference, 2019.https://doi.org/10.3139/9783446462441.025 .

Klippstein, Sven Helge, Anne Duchting, Thomas Reiher, F. Hengsbach, Dennis Menge, and Hans-Joachim Schmid. “Devolopment, Production and Post-Processing of a Topology Optimized Aircraft Bracket .” In 30th Annual International Solid Freeform Fabrication Symposium, 30:1932–45, 2019.

Menge, Dennis, Patrick Delfs, Marcel Töws, and Hans-Joachim Schmid. “Topology Optimized Heat Transfer Using the Example of an Electronic Housing.” In 29th Annual International Solid Freeform Fabrication Symposium, 29:687–97, 2018.

Lieneke, Tobias, Guido Adam, Stefan Josupeit, Patrick Delfs, and Detmar Zimmer. “Maßtoleranzen Für Die Additive Fertigung: Experimentelle Untersuchungen Für Das Lasersintern.”https://doi.org/10.3139/9783446454606.024 __In Proceedings of the 14th Rapid.Tech Conference, 327–44. Hanser Verlag, 2017.https://doi.org/10.3139/9783446454606.024  .

Josupeit, Stefan, Patrick Delfs, Dennis Menge, and Hans-Joachim Schmid. “Manufacturability and Mechanical Characterization of Laser Sintered Lattice Structures.”http://utw10945.utweb.utexas.edu/sites/default/files/2016/166-Josupeit.pdf__In 27th Annual International Solid Freeform Fabrication Symposium , 27:2077–86, 2016.http://utw10945.utweb.utexas.edu/sites/default/files/2016/166-Josupeit.pdf .

Delfs, Patrick, and Hans-Joachim Schmid. “Extended Analysis of the Surface Topography of Laser Sintered Polymer Parts .”https://www.bookshop.fraunhofer.de/buch/fraunhofer-direct-digital-manufacturing-conference-ddmc-2016/245111#__In Fraunhofer Direct Digital Manufacturing Conference, 3:411–14, 2016.https://www.bookshop.fraunhofer.de/buch/fraunhofer-direct-digital-manufacturing-conference-ddmc-2016/245111# .

Josupeit, Stefan, and Hans-Joachim Schmid. “Thermal Properties of Polyamide 12 Powder for Application in Laser Sintering.” In International Congress on Particle Technology (PARTEC) , 2016.