A. Unger et al., “Modeling of the Stick-Slip Effect in Heavy Copper Wire Bonding to Determine and Reduce Tool Wear,” in 2015 17th Electronics Packaging Technology Conference, 2015.
LibreCat: /record/9954
DOI: 10.1109/EPTC.2015.7412375

C. Sondermann-Woelke, Entwurf und Anwendung einer erweiterten Zustandsüberwachung zur Verlässlichkeitssteigerung selbstoptimierender Systeme. Shaker, 2015.
LibreCat: /record/9953

S. Althoff, J. Neuhaus, T. Hemsel, and W. Sextro, “Improving the bond quality of copper wire bonds using a friction model approach,” in Electronic Components and Technology Conference (ECTC), 2014 IEEE 64th, 2014, pp. 1549–1555.
LibreCat: /record/9868
DOI: 10.1109/ECTC.2014.6897500

P. Bornmann, T. Hemsel, W. Sextro, G. Memoli, M. Hodnett, and B. Zeqiri, “Self-Sensing Ultrasound Transducer for Cavitation Detection,” in 2014 IEEE International Ultrasonics Symposium Proceedings, 2014, pp. 663–666.
LibreCat: /record/9869
DOI: 10.1109/ULTSYM.2014.0163

F. Eacock  et al., “Microstructural investigations of aluminum and copper wire bonds,” in Proceedings of the 47th International Symposium on Microelectronics, 2014.
LibreCat: /record/9870
DOI: 10.4071/isom-THP32

P. Eichwald et al., “Analysis Method of Tool Topography Change and Identification of Wear Indicators for Heavy Copper Wire Wedge Bonding,” in Proceedings of the 47th International Symposium on Microelectronics, 2014, pp. 856–861.
LibreCat: /record/9871
DOI: 10.4071/isom-THP34

J. Gausemeier, F. Josef Rammig, W. Schäfer, and W. Sextro, Dependability of Self-Optimizing Mechatronic Systems, vol. Lecture Notes in Mechanical Engineering. Springer Berlin Heidelberg, 2014.
LibreCat: /record/9873

T. Hemsel, P. Bornmann, T. Morita, C. Sondermann-Wölke, and W. Sextro, “Reliability analysis of ultrasonic power transducers,” Archive of Applied Mechanics, pp. 1–7, 2014.
LibreCat: /record/9874
DOI: 10.1007/s00419-014-0965-4

M. Hunstig, T. Hemsel, and W. Sextro, “High-velocity operation of piezoelectric inertia motors: experimental validation,” Archive of Applied Mechanics, pp. 1–9, 2014.
LibreCat: /record/9876
DOI: 10.1007/s00419-014-0940-0

G. Isobe, T. Maeda, P. Bornmann, T. Hemsel, and T. Morita, “Synthesis of lead-free piezoelectric powders by ultrasonic-assisted hydrothermal method and properties of sintered (K0.48N.52)NBO3 ceramics,” Ultrasonics, Ferroelectrics, and Frequency Control, IEEE Transactions on, vol. 61, no. 2, pp. 225–230, 2014.
LibreCat: /record/9878
DOI: 10.1109/TUFFC.2014.6722608

J. K. Kimotho, T. Meyer, and W. Sextro, “PEM fuel cell prognostics using particle filter with model parameter adaptation,” in Prognostics and Health Management (PHM), 2014 IEEE Conference on, 2014, pp. 1–6.
LibreCat: /record/9879
DOI: 10.1109/ICPHM.2014.7036406

J. K. Kimotho and W. Sextro, “An approach for feature extraction and selection from non-trending data for machinery prognosis,” in Proceedings of the Second European Conference of the Prognostics and Health Management Society 2014, 2014, vol. 5.
LibreCat: /record/9880

J. K. Kimotho and W. Sextro, “Optimal Parameter Tuning for Multiclass Support Vector Machines in Machinery Health State Estimation,” PAMM, vol. 14, no. 1, pp. 815–816, 2014.
LibreCat: /record/9881
DOI: 10.1002/pamm.201410388

S. Kohl, W. Sextro, and A. Zuber, “Tire footprint analysis depending on the elastokinematics of a multi-link suspension system using multi-body dynamics simulation,” PAMM, vol. 14, no. 1, pp. 65–66, 2014.
LibreCat: /record/9882
DOI: 10.1002/pamm.201410020

T. Meyer, C. Priesterjahn, and W. Sextro, “Conclusion and Outlook,” in Dependability of Self-Optimizing Mechatronic Systems, J. Gausemeier, F. Josef Rammig, W. Schäfer, and W. Sextro, Eds. Springer Berlin Heidelberg, 2014, pp. 189–190.
LibreCat: /record/9883
DOI: 10.1007/978-3-642-53742-4_5

T. Meyer  and W. Sextro, “Closed-loop Control System for the Reliability of Intelligent Mechatronic Systems,” in Proceedings of the Second European Conference of the Prognostics and Health Management Society 2014, 2014, vol. 5.
LibreCat: /record/9884

T. Meyer , C. Sondermann-Wölke, and W. Sextro, “Method to Identify Dependability Objectives in Multiobjective Optimization Problem,” Conference Proceedings of the 2nd International Conference on System-Integrated Intelligence, vol. 15, pp. 46–53, 2014.
LibreCat: /record/9885
DOI: 10.1016/j.protcy.2014.09.033

J. Neuhaus and W. Sextro, “Thermo-Mechanical Model for Wheel Rail Contact using Coupled Point Contact Elements,” in Proceedings of the 5th International Conference on Computational Methods, 2014.
LibreCat: /record/9887

S. Schulze, W. Sextro, and F. Grüter, “Contact Modeling in Multibody Systems with Elastic Bodies in High-Frequency Applications,” PAMM, vol. 14, no. 1, pp. 39–40, 2014.
LibreCat: /record/9888
DOI: 10.1002/pamm.201410012

C. Sprock and W. Sextro, “Time-efficient dynamic analysis of structures exhibiting nonlinear peak bending,” in Instrumentation and Measurement Technology Conference (MTC) Proceedings, 2014 IEEE International, 2014, pp. 320–324.
LibreCat: /record/9889
DOI: 10.1109/I2MTC.2014.6860760