Brüggemann, J. P., Risse, L., Kullmer, G., &; Richard, H. A. (2018). Fracture mechanical investigations on selective laser melted TiAl6. In Procedia Structural Integrity (p. in press).https://doi.org/10.1016/j.prostr.2018.12.053 
LibreCat: /record/22148
DOI: 10.1016/j.prostr.2018.12.053

Risse, L., Schramm, B., Brüggemann, J. P., Kullmer, G., &; Richard, H. A. (2018). Entwicklung von steifigkeitsangepassten, lasergeschmolzenen Kurzschaft-Hüftendoprothesen. In Proceedings of the 15th Rapid.Tech Conference (pp. 405–417).
LibreCat: /record/22150

Menge, D., Delfs, P., Töws, M., &; Schmid, H.-J. (2018). Topology Optimized Heat Transfer Using the Example of an Electronic Housing. 29th Annual International Solid Freeform Fabrication Symposium, 29, 687–697.
LibreCat: /record/22183

Kummert, C., Josupeit, S., &; Schmid, H.-J. (2018). Thermoplastic Elastomer Part Color as Function of Temperature Histories and Oxygen Atmosphere During Selective Laser Sinterung. Journal of Minerals, Metals and Materials Society, 70(3), 425–430.https://doi.org/10.1007/s11837-017-2658-2 
LibreCat: /record/22196
DOI: 10.1007/s11837-017-2658-2

Urbanek, S., Ponick, B., Taube, A., Hoyer, K.-P., Schaper, M., Lammers, S.,  Zimmer, D. (2018). Additive Manufacturing of a Soft Magnetic Rotor Active Part and Shaft for a Permanent Magnet Synchronous Machine. In Conference paper, 2018 IEEE Transportation Electrification Conference and Expo (ITEC), Juni 2018, DOI: 10.1109/ITEC.2018.8450250.
LibreCat: /record/22430

Tominski, J., &; Lammers, S. (2018). Software-assisted design check of additive manufactured components. In 14th PERMAS Users’ Conference (Vol. 14).https://www.semanticscholar.org/paper/METHOD-FOR-A-SOFTWARE-BASED-DESIGN-CHECK-OF-Tominski-Lammers/83e141f55b33041ade5e661958b449047d6f026e#extracted 
LibreCat: /record/22433
DOI: https://www.semanticscholar.org/paper/METHOD-FOR-A-SOFTWARE-BASED-DESIGN-CHECK-OF-Tominski-Lammers/83e141f55b33041ade5e661958b449047d6f026e#extracted

Tominski, J., Lammers, S., Wulf, C., &; Zimmer, D. (2018). Method for a Software-based Design Check of Additively Manufactured Components. In 29th Annual International Solid Freeform Fabrication Symposium (Vol. 29).http://utw10945.utweb.utexas.edu/sites/default/files/2018/006%20MethodforaSoftwareBasedDesignCheckofAdditi.pdf 
LibreCat: /record/22434
DOI: http://utw10945.utweb.utexas.edu/sites/default/files/2018/006%20MethodforaSoftwareBasedDesignCheckofAdditi.pdf

Künneke, T., Bücker, S., Lieneke, T., &; Zimmer, D. (2018). Ein Beitrag zur Anpassung bestehender Konstruktionsmethodiken an die additiven Fertigungsverfahren. In Proceedings of the 15th Rapid.Tech Conference (pp. 128–143). Carl Hanser Verlag GmbH &; Co. KG.https://doi.org/10.3139/9783446458123.008 
LibreCat: /record/22435
DOI: 10.3139/9783446458123.008

Jacob, A., Künneke, T., Lieneke, T., Baumann, T., Stricker, N., Zimmer, D., &; Lanza, G. (2018). Iterative Produktentwicklung und Produktionsplanung für die Additive Fertigung. ZWF Zeitschrift Für Wirtschaftlichen Fabrikbetrieb, 113(11), 742–745.https://doi.org/10.3139/104.112005 
LibreCat: /record/22436
DOI: https://doi.org/10.3139/104.112005

Brückner, U., Künneke, T., Schadomsky, M. H., Strop, M., &; Zimmer, D. (2018). Elektromechanische Antriebe (pp. 247–290). Carl Hanser Verlag.https://doi.org/10.3139/9783446456198.009 
LibreCat: /record/22506
DOI: 10.3139/9783446456198.009

Büsching, J., Lindemann, C., Jahnke, U., Kruse, A., &; Koch, R. (2018). Technology Integration into Existing Companies. In 29th Annual International Solid Freeform Fabrication Symposium (Vol. 29, pp. 14–31).http://utw10945.utweb.utexas.edu/sites/default/files/2018/002%20TechnologyIntegrationintoExistingCompanies.pdf 
LibreCat: /record/21696
DOI: http://utw10945.utweb.utexas.edu/sites/default/files/2018/002%20TechnologyIntegrationintoExistingCompanies.pdf

Graessler, I., Scholle, P., Hentze, J., &; Oleff, C. (2018). SEMI-AUTOMATIZED ASSESSMENT OF REQUIREMENT INTERRELATIONS. In Proceedings of the DESIGN 2018 15th International Design Conference.https://doi.org/10.21278/idc.2018.0298 
LibreCat: /record/21991
DOI: 10.21278/idc.2018.0298

Gräßler, I., Scholle, P., Hentze, J., &; Oleff, C. (2018). Semi-Automatized Assessment of Requirement Interrelations. In 15th International Design Conference (Vol. 15, p. S. 325-334).https://doi.org/10.21278/idc.2018.0298 
LibreCat: /record/21998
DOI: 10.21278/idc.2018.0298

Gräßler, I., Oleff, C., &; Scholle, P. (2018). Methode zur Bewertung von Anforderungsänderungen additiv gefertigter Produkte. Design for X - Beiträge Zum 29. DfX-Symposium, 29, 333–344.https://www.researchgate.net/publication/331742431_Methode_zur_Bewertung_von_Anforderungsanderungen_additiv_gefertigter_Produkte 
LibreCat: /record/21999
DOI: https://www.researchgate.net/publication/331742431_Methode_zur_Bewertung_von_Anforderungsanderungen_additiv_gefertigter_Produkte

Schumacher, C., Schöppner, V., &; Gnaase, S. (2018). Processing Short Fiber Reinforced Polymers in the Fused Deposition Modeling Process. 29th Annual International Solid Freeform Fabrication Symposium, 29, 1112–1120.http://utw10945.utweb.utexas.edu/sites/default/files/2018/090%20ProcessingShortFiberReinforcedPolymersinthe.pdf 
LibreCat: /record/22020
DOI: http://utw10945.utweb.utexas.edu/sites/default/files/2018/090%20ProcessingShortFiberReinforcedPolymersinthe.pdf

Knoop, F., Köhler, M., Lieneke, T., Zimmer, D., &; Schöppner, V. (2018). Erarbeitung von Konstruktionsregeln für Hybridbauteile: Integration von metallischen Einlegern in FDM-Strukturen. Konstruktion - Zeitschrift Für Produktentwicklung Und Ingenieur-Werkstoffe, 10, 83–88.
LibreCat: /record/22034

Knoop, F., Lieneke, T., Schöppner, V., &; Zimmer, D. (2018). Additive Fertigung nach Maß. Kunststoffe, 6, 70–73.https://res.cloudinary.com/sternwald-systems/raw/upload/v1/hugoprd/ARTIKEL_ATTACH/00241B42_8D96DD914ED4/5029dcf18479b2d2f28f3c2032d6a0a5ac46d8ad/KU_2018_06_Additive-Fertigung-nach-Mass.pdf 
LibreCat: /record/22035
DOI: https://res.cloudinary.com/sternwald-systems/raw/upload/v1/hugoprd/ARTIKEL_ATTACH/00241B42_8D96DD914ED4/5029dcf18479b2d2f28f3c2032d6a0a5ac46d8ad/KU_2018_06_Additive-Fertigung-nach-Mass.pdf

Schumacher, C., Schöppner, V., &; Gnaase, S. (2018). Processing Short Fiber Reinforced Polymers in the Fused Deposition Modeling Process. 29th Annual International Solid Freeform Fabrication Symposium, 29, 1112–1120.http://utw10945.utweb.utexas.edu/sites/default/files/2018/090%20ProcessingShortFiberReinforcedPolymersinthe.pdf 
LibreCat: /record/22043
DOI: http://utw10945.utweb.utexas.edu/sites/default/files/2018/090%20ProcessingShortFiberReinforcedPolymersinthe.pdf

Ahlers, D., &; Tröster, T. (2018). Entwicklung einer Prozessroute für die Luftfahrtindustrie mit erhöhter Aufbaurate im Laserstrahlschmelzprozess von Ti6Al4V. Presented at the Rapid.Tech 2018 – Fachforum Luftfahrt, Erfurt.
LibreCat: /record/16039

Knoop, F., &; Schöppner, V. (2018). Influence of the Layer Time on the Resulting Part Properties in the Fused Deposition Modeling Process. SPE ANTEC 2018, 1.https://www.tib.eu/de/suchen/id/TIBKAT%3A1700027301 
LibreCat: /record/22046
DOI: https://www.tib.eu/de/suchen/id/TIBKAT%3A1700027301