Brüggemann, J. P., et al. “Festigkeits- Und Leichtbauoptimierte Konstruktion Und Auslegung Eines Additiv Gefertigten Fahrradvorbaus.”10.3139/9783446450608.025__Rapid Tech - International Trade Show &; Conference for Additive Manufacturing, 2016, pp. 290–300, doi:10.3139/9783446450608.025.

Reschetnik, W., et al. Fatigue Life Manipulation of SLM Parts. 2016.

Brüggemann, J. P., et al. “Optimierung von Fahrradtretkurbeln Mittels Additiver Fertigung.” DVM - Tagung - Additiv Gefertigte Bauteile Und Strukturen, Deutscher Verband Für Materialforschung Und -Prüfung e.V., 2016, pp. 101–12.

Reschetnik, W., et al. “Lebensdauerbeeinflussung Durch Additive Fertigung.” DVM - Tagung - Additiv Gefertigte Bauteile Und Strukturen, Deutscher Verband Für Materialforschung Und -Prüfung e.V., 2016, pp. 131–40.

Riemer, A., et al. “Materialkennwerte Lasergeschmolzener Werkstoffe.” DVM - Tagung - Additiv Gefertigte Bauteile Und Strukturen, Deutscher Verband Für Materialforschung Und -Prüfung e.V., 2016, pp. 161–74.

Reschetnik, W., et al. “Fatigue Crack Growth Behavior and Mechanical Properties of Additively Processed EN AW-7075 Aluminium Alloy.” Procedia Structural Integrity, 2016, pp. 3040–48.

Riemer, A., and H. A. Richard. “Crack Propagation in Additive Manufactured Materials and Structures.” Procedia Structural Integrity, 2016, pp. 1229–36.

Josupeit, Stefan, et al. “Manufacturability and Mechanical Characterization of Laser Sintered Lattice Structures.”http://utw10945.utweb.utexas.edu/sites/default/files/2016/166-Josupeit.pdf__27th Annual International Solid Freeform Fabrication Symposium , vol. 27, 2016, pp. 2077–86, doi:http://utw10945.utweb.utexas.edu/sites/default/files/2016/166-Josupeit.pdf.

Delfs, Patrick, et al. “Optimized Build Orientation of Additive Manufactured Parts for Improved Surface Quality and Build Time.”10.1016/j.addma.2016.06.003__Additive Manufacturing, vol. 2, no. 12, Part B, Elsevier, 2016, pp. 214–320, doi:10.1016/j.addma.2016.06.003.

Delfs, Patrick, and Hans-Joachim Schmid. “Extended Analysis of the Surface Topography of Laser Sintered Polymer Parts .”https://www.bookshop.fraunhofer.de/buch/fraunhofer-direct-digital-manufacturing-conference-ddmc-2016/245111#__Fraunhofer Direct Digital Manufacturing Conference, vol. 3, 2016, pp. 411–14, doi:https://www.bookshop.fraunhofer.de/buch/fraunhofer-direct-digital-manufacturing-conference-ddmc-2016/245111#.

Josupeit, Stefan, and Hans-Joachim Schmid. “Thermal Properties of Polyamide 12 Powder for Application in Laser Sintering.” International Congress on Particle Technology (PARTEC) , 2016.

Josupeit, Stefan, et al. “Dimensional Accuracy of Polymer Laser Sintered Parts: Influences and Measures.”10.3139/9783446450608.009__Rapid Tech - International Trade Show &; Conference for Additive Manufacturing , 2016, pp. 107–20, doi:10.3139/9783446450608.009.

Künneke, Thomas, and Detmar Zimmer. “Funktionsintegration Additiv Gefertigter Dämpfungsstrukturen Bei Biegeschwingungen.” DVM Tagung - Additiv Gefertigte Bauteile Und Strukturen, 2016, pp. 151–60.

Lammers, Stefan, et al. “Additive Manufacturing of a Lightweight Rotor for a Permanent Magnet Synchronous Machine.”10.1109/EDPC.2016.7851312__EDPC 2016, 2016, doi:10.1109/EDPC.2016.7851312.

Josupeit, Stefan, et al. “Influences on the Dimensional Accuracy of Laser Sintered Parts along the Process Chain.” 27th Annual International Solid Freeform Fabrication Symposium , 2016.

Lieneke, Tobias, et al. “Dimensional Tolerances for Additive Manufacturing: Experimental Investigation of Manufacturing Accuracy for Selective Laser Melting.” ASPE 2016 Summer Topical Meeting, 2016, p. S.9-15.

Knoop, Frederick, et al. “Reproducibility of the Dimensional Accuracy - Investigations for FDM.”10.3139/9783446454606.004__ASPE Spring Topical Meeting, 2016, p. S.3-8, doi:10.3139/9783446454606.004.

Knoop, Frederick, et al. “Reproducibility of the Dimensional Accuracy - Investigations for FDM.” Summer Topical Meeting 2016, 2016.

Lieneke, Tobias, et al. “Dimensional Tolerances for Additive Manufacturing: Experimental Investigation for Fused Deposition Modeling.”10.1016/j.procir.2016.02.361__CAT 2016, vol. 43, 2016, pp. 286–91, doi:10.1016/j.procir.2016.02.361.

Deppe, G., and R. Koch. “Supporting the Decision Process for Applying Additive Manufacturing in the MRO Aerospace Business by MADM.”http://utw10945.utweb.utexas.edu/sites/default/files/2016/006-Deppe.pdf__27th Annual International Solid Freeform Fabrication Symposium , vol. 27, 2016, pp. 81–92, doi:http://utw10945.utweb.utexas.edu/sites/default/files/2016/006-Deppe.pdf.