Lammers, Stefan, Thorsten Koers, Balázs Magyar, Detmar Zimmer, and Tobias Lieneke. “Depiction of Support Structures in Technical Drawings.” In Proceedings of the 34th Annual International Solid Freeform Fabrication Symposium 2023, edited by Joseph Beaman, Vol. 34, 2023.

Lammers, Stefan, Thorsten Koers, Balázs Magyar, Detmar Zimmer, and Tobias Lieneke. “Depiction of Support Structures in Technical Drawings.” Austin, Texas, USA, 2023.

Lieneke, Tobias, Stefan Lammers, and Detmar Zimmer. “Geometrical Deviations In Additive Manufacturing -- Influences On The Manufacturing Accuracy.”http://dx.doi.org/10.26153/tsw/17565__In 32nd Annual International Virtual Solid Freeform Fabrication (SFF) Symposium , 2021.http://dx.doi.org/10.26153/tsw/17565 .

Lammers, Stefan, Tobias Lieneke, and Detmar Zimmer. “Development of a Method to Derive Design Guidelines for Production-Suitable Support Structures in Metal Laser Powder Bed Fusion.” Austin, Texas, 2021.

Lieneke, Tobias, Thomas Künneke, Niclas Eschner, Alexander  Jacob, Martin  Schäfer, Thorsten Hickmann, Rami Faroun, et al. Kombination und Integration etablierter Technologien mit additiven Fertigungsverfahren, 2020.

Künneke, Thomas, Tobias Lieneke, Stefan Lammers, and Detmar Zimmer. “Design Guidelines for Post-Processing of Laser Beam Melting in Context of Support Structures.”https://www.euspen.eu/knowledge-base/AM19127.pdf__In Proceedings of the Special Interest Group Meeting on Advancing Precision in Additive Manufacturing, 137–40, 2019.https://www.euspen.eu/knowledge-base/AM19127.pdf .

Lieneke, Tobias, Thomas Künneke, Fabian Schlenker, Vera Denzer, and Detmar Zimmer. “Manufacturing Accuracy In Additive Manufacturing: A Method To Determine Geometrical Tolerances.”https://www.euspen.eu/knowledge-base/AM19129.pdf__In Special Interest Group Meeting: Advancing Precision in Additive Manufacturing, 2019.https://www.euspen.eu/knowledge-base/AM19129.pdf .

Urbanek, Stefan, Bernd Ponick, Alexander Taube, Kay-Peter Hoyer, Mirko Schaper, Stefan Lammers, Tobias Lieneke, and Detmar Zimmer. “Additive Manufacturing of a Soft Magnetic Rotor Active Part and Shaft for a Permanent Magnet Synchronous Machine.”https://doi.org/10.1109/itec.2018.8450250__In 2018 IEEE Transportation Electrification Conference and Expo (ITEC), 2018.https://doi.org/10.1109/itec.2018.8450250 .

Urbanek, Stefan, Bernd Ponick, Alexander Taube, Kay-Peter Hoyer, Mirko Schaper, Stefan Lammers, Tobias Lieneke, and Detmar Zimmer. “Additive Manufacturing of a Soft Magnetic Rotor Active Part and Shaft for a Permanent Magnet Synchronous Machine.” In Conference Paper, 2018 IEEE Transportation Electrification Conference and Expo (ITEC), Juni 2018, DOI: 10.1109/ITEC.2018.8450250, 2018.

Künneke, Thomas, Sonja Bücker, Tobias Lieneke, and Detmar Zimmer. “Ein Beitrag Zur Anpassung Bestehender Konstruktionsmethodiken an Die Additiven Fertigungsverfahren.”https://doi.org/10.3139/9783446458123.008__In Proceedings of the 15th Rapid.Tech Conference, 128–43. Carl Hanser Verlag GmbH &; Co. KG, 2018.https://doi.org/10.3139/9783446458123.008 .

Jacob, Alexander, Thomas Künneke, Tobias Lieneke, Tobias Baumann, Nicole Stricker, Detmar Zimmer, and Gisela Lanza. “Iterative Produktentwicklung Und Produktionsplanung Für Die Additive Fertigung.”https://doi.org/10.3139/104.112005__ZWF Zeitschrift Für Wirtschaftlichen Fabrikbetrieb 113, no. 11 (2018): 742–45.https://doi.org/10.3139/104.112005 .

Knoop, F., M. Köhler, Tobias Lieneke, Detmar Zimmer, and Volker Schöppner. “Erarbeitung von Konstruktionsregeln Für Hybridbauteile: Integration von Metallischen Einlegern in FDM-Strukturen.” Konstruktion - Zeitschrift Für Produktentwicklung Und Ingenieur-Werkstoffe 10 (2018): 83–88.

Knoop, F., Tobias Lieneke, Volker Schöppner, and Detmar Zimmer. “Additive Fertigung Nach Maß.”https://res.cloudinary.com/sternwald-systems/raw/upload/v1/hugoprd/ARTIKEL_ATTACH/00241B42_8D96DD914ED4/5029dcf18479b2d2f28f3c2032d6a0a5ac46d8ad/KU_2018_06_Additive-Fertigung-nach-Mass.pdf__Kunststoffe 6 (2018): 70–73.https://res.cloudinary.com/sternwald-systems/raw/upload/v1/hugoprd/ARTIKEL_ATTACH/00241B42_8D96DD914ED4/5029dcf18479b2d2f28f3c2032d6a0a5ac46d8ad/KU_2018_06_Additive-Fertigung-nach-Mass.pdf .

Lammers, Stefan, Johannes Tominski, Sebastian Magerkohl, Thomas Künneke, Tobias Lieneke, and Detmar Zimmer. “Konstruktionsrichtlinien Für Eine Softwaregestützte Anpassung von Additiv Gefertigten Bauteilen Im Hinblick Auf Eine Robuste Fertigung.”https://doi.org/10.3139/9783446458123.005__In Proceedings of the 15th Rapid.Tech Conference, 81–94, 2018.https://doi.org/10.3139/9783446458123.005 .

Lammers, Stefan, Johannes Tominski, Sebastian Magerkohl, Tobias Lieneke, Thomas Künneke, and Detmar Zimmer. “Design Guidelines for a Software-Supported Adaptation of Additively Manufactured Components with Regard to a Robust Production.”http://utw10945.utweb.utexas.edu/sites/default/files/2018/046%20DesignGuidelinesforaSoftwareSupportedAdaptat.pdf__In 29th Annual International Solid Freeform Fabrication Symposium, Vol. 29, 2018.http://utw10945.utweb.utexas.edu/sites/default/files/2018/046%20DesignGuidelinesforaSoftwareSupportedAdaptat.pdf .

Urbanek, Stefan, Bernd Ponick, Alexander Taube, Kay-Peter Hoyer, Mirko Schaper, Stefan Lammers, Tobias Lieneke, and Detmar Zimmer. “Additive Manufacturing of a Soft Magnetic Rotor Active Part and Shaft for a Permanent Magnet Synchronous Machine.”https://doi.org/10.1109/itec.2018.8450250__In 2018 IEEE Transportation Electrification Conference and Expo (ITEC). IEEE, 2018.https://doi.org/10.1109/itec.2018.8450250 .

Schöppner, Volker, F. Knoop, M. Köhler, Tobias Lieneke, and Detmar Zimmer. “Erarbeitung von Konstruktionsregeln für Hybridbauteile: Integration von metallischen Einlegern in FDM-Strukturen.” Konstruktion 70. Jg. Heft 10 (2018): 83–88.

Schöppner, Volker, Detmar Zimmer, Frederick Knoop, and Tobias Lieneke. “Additive Fertigung nach Maß.” Kunststoffe 108. Jg. Heft 6 (2018).

Lieneke, Tobias, Guido Adam, Stefan Josupeit, Patrick Delfs, and Detmar Zimmer. “Maßtoleranzen Für Die Additive Fertigung: Experimentelle Untersuchungen Für Das Lasersintern.”https://doi.org/10.3139/9783446454606.024 __In Proceedings of the 14th Rapid.Tech Conference, 327–44. Hanser Verlag, 2017.https://doi.org/10.3139/9783446454606.024  .

Knoop, Frederick, and Tobias Lieneke. “Dimensional Tolerances for Additive Manufacturing: Fused Deposition Modeling.” In Inside 3D Printing 2017, 2017.