Milaege, Dennis, et al. “Anisotropic Mechanical and Microstructural Properties of a Ti-6Al-7Nb Alloy for Biomedical Applications Manufactured via Laser Powder Bed Fusion.”10.3390/cryst14020117__Crystals, vol. 14, no. 2, 117, MDPI AG, 2024, doi:10.3390/cryst14020117.

Grydin, Olexandr, et al. “Numerical and Experimental Investigation of Twin-Roll Casting of Aluminum–Lithium Strips.”10.1007/978-3-031-22532-1_137__Light Metals 2023, edited by Stephan Broek, Springer Nature Switzerland, 2023, pp. 1031–37, doi:10.1007/978-3-031-22532-1_137.

Pramanik, Sudipta, et al. “Powder Production via Atomisation and Subsequent Laser Powder Bed Fusion Processing of Fe+316L Steel Hybrid Alloy.”10.3390/powders2010005__Powders, vol. 2, no. 1, MDPI AG, 2023, pp. 59–74, doi:10.3390/powders2010005.

Slapáková, Michaela, et al. “D-Structure of Intermetallic Interface Layer in Al–Steel Clad Material.”10.1016/j.vacuum.2023.112043__Vacuum, vol. 212, 112043, Elsevier BV, 2023, doi:10.1016/j.vacuum.2023.112043.

Haase, Michael, et al. “Umsetzung einer optimierten Oberflächenschlitzung zur Wirbelstromverlustreduktion auf der Oberfläche eines additiv gefertigten Permanentmagnet-Rotors.” Proceedings of the 19th Rapid.Tech 3D Conference Erfurt, Germany, 9–11 May 2023, edited by Michael Kynast et al., Carl Hanser Verlag GmbH &; Co. KG, 2023.

Andreiev, Anatolii, et al. “Powder Bed Fusion of Soft-Magnetic Iron-Based Alloys with High Silicon Content.”10.1016/j.jmatprotec.2023.117991__Journal of Materials Processing Technology, vol. 317, 117991, Elsevier BV, 2023, doi:10.1016/j.jmatprotec.2023.117991.

Pramanik, Sudipta, et al. “Experimental and Finite Element Method Investigation on the Compression Behaviour of FCCZ and BCC Lattice Structures of Additively Manufactured Fe-3Si Samples.”10.1108/rpj-06-2022-0190__Rapid Prototyping Journal, vol. 29, no. 6, Emerald, 2023, pp. 1257–69, doi:10.1108/rpj-06-2022-0190.

Pramanik, Sudipta, et al. “An Experimental and Computational Modeling Study on Additively Manufactured MicroArchitectured Ti–24Nb–4Zr–8Sn HollowStrut Lattice Structures.”10.1002/adem.202201850__Advanced Engineering Materials, vol. 25, no. 14, Wiley, 2023, doi:10.1002/adem.202201850.

Menge, Dennis, et al. “Case Study IV: Individualized Medical Technology Using Additive Manufacturing.”10.14361/9783839463772-007__Climate Protection, Resource Efficiency, and Sustainable Engineering, edited by Illona Horwath and Swetlana Schweizer, transcript Verlag, 2023, doi:10.14361/9783839463772-007.

Pramanik, Sudipta, et al. “Quasi-In Situ Localized Corrosion of an Additively Manufactured FeCo Alloy in 5 Wt Pct NaCl Solution.”10.1007/s11661-023-07186-7__Metallurgical and Materials Transactions A, Springer Science and Business Media LLC, 2023, doi:10.1007/s11661-023-07186-7.

Borgert, Thomas, et al. “Potentials of a Friction-Induced Recycling Process to Improve Resource and Energy Efficiency in Manufacturing Technology.”10.1007/s12289-023-01785-w__International Journal of Material Forming, vol. 16, no. 6, 59, Springer Science and Business Media LLC, 2023, doi:10.1007/s12289-023-01785-w.

Pramanik, Sudipta, et al. “Additive Manufacturing and Mechanical Properties of Auxetic and Non-Auxetic Ti24Nb4Zr8Sn Biomedical Stents: A Combined Experimental and Computational Modelling Approach.”10.3390/cryst13111592__Crystals, vol. 13, no. 11, 1592, MDPI AG, 2023, doi:10.3390/cryst13111592.

Borgert, Thomas, et al. “Influence of Thermo-Mechanical Joining Process on the Microstructure of a Hypoeutectic Aluminium Cast Alloy.”10.21741/9781644902417-24__Materials Research Proceedings, vol. 25, Materials Research Forum LLC, 2023, pp. 187–94, doi:10.21741/9781644902417-24.

Neuser, Moritz, et al. “Mechanical and Microstructure Characterisation of the Hypoeutectic Cast Aluminium Alloy AlSi10Mg Manufactured by the Twin-Roll Casting Process.”10.3390/jmmp7040132__Journal of Manufacturing and Materials Processing, vol. 7, no. 4, 132, MDPI AG, 2023, doi:10.3390/jmmp7040132.

Borgert, Thomas, et al. “Thermomechanical Joining of Hypoeutectic Aluminium Cast Plates.”10.3390/jmmp7050169__Journal of Manufacturing and Materials Processing, vol. 7, no. 5, 169, MDPI AG, 2023, doi:10.3390/jmmp7050169.

Grydin, Olexandr, et al. “Influence of Shell Material on the Microstructure and Mechanical Properties of Twin-Roll Cast Al-Si-Mg Alloy.”10.1007/978-3-031-41341-4_61__    Conference: ICTP 2023: Proceedings of the 14th International Conference on the Technology of Plasticity - Current Trends in the Technology of PlasticityAt: Cannes (France), Springer Nature Switzerland, 2023, doi:10.1007/978-3-031-41341-4_61.

CIESLAR, Miroslav, et al. “HOMOGENIZATION OF TWIN-ROLL CAST Al-Li-BASED ALLOY STUDIED BY IN-SITU ELECTRON MICROSCOPY.”10.37904/metal.2022.4438__METAL 2022 Conference Proeedings, TANGER Ltd., 2022, doi:10.37904/metal.2022.4438.

BAJTOSOVÁ, Lucia, et al. “Phase Identification in Twin-Roll Cast Al-Li Alloys.”10.37904/metal.2022.4437__METAL 2022 Conference Proeedings, TANGER Ltd., 2022, doi:10.37904/metal.2022.4437.

Abdelaal, Osama, et al. “LPBF Manufactured Functionally Graded Lattice Structures Obtained by Graded Density and Hybrid Poisson’s Ratio.”10.3390/ma15124072__Materials, vol. 15, no. 12, 4072, MDPI AG, 2022, doi:10.3390/ma15124072.

Voswinkel, Dietrich, et al. “Co-Bonding of Carbon Fibre-Reinforced Epoxy and Galvanised Steel with Laser Structured Interface for Automotive Applications.”10.1080/09243046.2022.2143746__Advanced Composite Materials, Informa UK Limited, 2022, pp. 1–16, doi:10.1080/09243046.2022.2143746.