G. Kullmer, D. Weiß, and B. Schramm, “An alternative and robust formulation of the fatigue crack growth rate curve for long cracks,”10.1016/j.engfracmech.2023.109826__Engineering Fracture Mechanics, vol. 296, Art. no. 109826, 2024, doi:10.1016/j.engfracmech.2023.109826 .
LibreCat: /record/51737
DOI: 10.1016/j.engfracmech.2023.109826

G. Kullmer, D. Weiß, and B. Schramm, “Weiterentwicklung des Exponentialansatzes zur Beschreibung von Rissfortschrittskurven,”10.48447/BR-2024-369__presented at the 56. Tagung des DVM-Arbeitskreises Bruchmechanik und Bauteilsicherheit , Kassel, 2024, doi:10.48447/BR-2024-369 .
LibreCat: /record/53394
DOI: 10.48447/BR-2024-369

D. Weiß, T. Duffe, M. Buczek, G. Kullmer, and B. Schramm, “Bruchmechanische Untersuchung des Dualphasenstahls HX unter Temperatureinfluss,”10.48447/WP-2023-244__presented at the Werkstoffprüfung 2023: Werkstoffe und Bauteile auf dem Prüfstand - Tagung, Berlin, 2023, doi:10.48447/WP-2023-244 .
LibreCat: /record/51739
DOI: 10.48447/WP-2023-244

D. Weiß and B. Schramm, “Fracture mechanical investigation of preformed metal sheets using a novel CC-specimen,”10.1016/j.prostr.2022.12.111__in Procedia Structural Integrity, Madeira, 2022, vol. 42, pp. 879–885, doi:10.1016/j.prostr.2022.12.111 .
LibreCat: /record/35271
DOI: 10.1016/j.prostr.2022.12.111

T. D. Joy, D. Weiß, B. Schramm, and G. Kullmer, “Further Development of 3D Crack Growth Simulation Program to Include Contact Loading Situations,”10.3390/app12157557__Applied Sciences, vol. 12, no. 15, Art. no. 7557, 2022, doi:10.3390/app12157557 .
LibreCat: /record/34224
DOI: 10.3390/app12157557

D. Weiß, B. Schramm, and G. Kullmer, “Influence of plane mixed-mode loading on the kinking angle of clinchable metal sheets,”10.1016/j.prostr.2022.03.082__in Procedia Structural Integrity, online, 2022, vol. 39, pp. 139–147, doi:10.1016/j.prostr.2022.03.082 .
LibreCat: /record/30726
DOI: 10.1016/j.prostr.2022.03.082

B. Schramm et al., “A Review on the Modeling of the Clinching Process Chain - Part III: Operational Phase,”10.1016/j.jajp.2022.100135__Journal of Advanced Joining Processes, Art. no. 100135, 2022, doi:10.1016/j.jajp.2022.100135 .
LibreCat: /record/34070
DOI: 10.1016/j.jajp.2022.100135

G. Kullmer, D. Weiß, and B. Schramm, “Development of a method for the separate measurement of the growth of internal crack tips by means of the potential drop method,”10.1016/j.engfracmech.2022.108899__Engineering Fracture Mechanics, Art. no. 108899, 2022, doi:10.1016/j.engfracmech.2022.108899 .
LibreCat: /record/34246
DOI: 10.1016/j.engfracmech.2022.108899

B. Schramm and D. Weiß, “Fracture mechanical evaluation of the material HX,”10.1515/mt-2022-0191__Materials Testing, vol. 64, no. 10, pp. 1437–1449, 2022, doi:10.1515/mt-2022-0191 .
LibreCat: /record/34403
DOI: 10.1515/mt-2022-0191

R. Kupfer et al., “Clinching of Aluminum Materials – Methods for the Continuous Characterization of Process, Microstructure and Properties,”10.1016/j.jajp.2022.100108__Journal of Advanced Joining Processes, vol. 5, Art. no. 100108, 2022, doi:10.1016/j.jajp.2022.100108 .
LibreCat: /record/31828
DOI: 10.1016/j.jajp.2022.100108

R. Kupfer et al., “Clinching of Aluminum Materials – Methods for the Continuous Characterization of Process, Microstructure and Properties,”10.1016/j.jajp.2022.100108__Journal of Advanced Joining Processes, Art. no. 100108, 2022, doi:10.1016/j.jajp.2022.100108 .
LibreCat: /record/31238
DOI: 10.1016/j.jajp.2022.100108

R. Kupfer et al., “Clinching of Aluminum Materials – Methods for the Continuous Characterization of Process, Microstructure and Properties,”10.1016/j.jajp.2022.100108__Journal of Advanced Joining Processes, vol. 5, Art. no. 100108, 2022, doi:10.1016/j.jajp.2022.100108 .
LibreCat: /record/34215
DOI: 10.1016/j.jajp.2022.100108

G. Kullmer, D. Weiß, and B. Schramm, “Entwicklung einer Methode zur differenzierten Messung des Wachstums der Rissenden von Innenrissen mit der Elektropotentialmethode,”10.48447/BR-2021-013__Bremen, 2021, vol. DVM-Bericht 253, pp. 107–116, doi:10.48447/BR-2021-013 .
LibreCat: /record/34472
DOI: 10.48447/BR-2021-013

D. Weiß, B. Schramm, M. Neuser, O. Grydin, and G. Kullmer, “Experimentelle bruchmechanische Untersuchung eines clinchgeeigneten Bleches aus HX mithilfe einer neuen Probengeometrie,”10.48447/BR-2021-025__Bremen, 2021, vol. DVM-Bericht 253, pp. 231–240, doi:10.48447/BR-2021-025 .
LibreCat: /record/24006
DOI: 10.48447/BR-2021-025

D. Weiß, B. Schramm, and G. Kullmer, “Numerical and Experimental Fracture Mechanical Investigations of Clinchable Sheet Metals Made of HX,”10.4028/www.scientific.net/kem.883.127__in Key Engineering Materials, online, 2021, vol. 883, pp. 127–132, doi:10.4028/www.scientific.net/kem.883.127 .
LibreCat: /record/30675
DOI: 10.4028/www.scientific.net/kem.883.127

D. Weiß, B. Schramm, and G. Kullmer, “Holistic investigation chain for the experimental determination of fracture mechanical material parameters with special specimens,”10.1007/s11740-021-01096-6__Production Engineering, 2021, doi:10.1007/s11740-021-01096-6 .
LibreCat: /record/30674
DOI: 10.1007/s11740-021-01096-6

G. Kullmer, D. Weiß, B. Bauer, and H. A. Richard, “Entwicklung einer Axialrissprobe zur Ermittlung von bruchmechanischen Kennwerten für Rohre,” Hamburg, 2020, vol. DVM-Bericht 252, pp. 61–70.
LibreCat: /record/24012

D. Weiß, B. Schramm, and G. Kullmer, “Development of a special specimen geometry for the experimental determination of fracture mechanical parameters of clinchable metal sheets,”10.1016/j.prostr.2020.11.081__vol. 28. Elsevier, pp. 2335–2341, 2020, doi:10.1016/j.prostr.2020.11.081 .
LibreCat: /record/23980
DOI: 10.1016/j.prostr.2020.11.081

D. Weiß, B. Schramm, and G. Kullmer, “Experimental and numerical preliminary investigations of the base material and preformed components regarding fatigue crack growth in joined structures,” presented at the Material Science and Engineering Congress - M, Darmstadt, 2020.
LibreCat: /record/23982