Bielak, C. R., Böhnke, M., Friedlein, J., Bobbert, M., Mergheim, J., Steinmann, P., &; Meschut, G. (2023). Numerical analysis of failure modeling in clinching process chain simulation. Materials Research Proceedings. SHEMET 2023.https://doi.org/10.21741/9781644902417-33 

Böhnke, M., Bielak, C. R., Friedlein, J., Bobbert, M., Mergheim, J., Steinmann, P., &; Meschut, G. (2023). A calibration method for failure modeling in clinching process simulations. Materials Research Proceedings.https://doi.org/10.21741/9781644902417-34 

Böhnke, M., Bielak, C. R., Bobbert, M., &; Meschut, G. (2023). Experimental and Numerical Investigation of Clinched Joints Under Shear Tensile Loading at High Strain Rates. In Lecture Notes in Mechanical Engineering. 14th International Conference on the Technology of Plasticity. Springer Nature Switzerland.https://doi.org/10.1007/978-3-031-41341-4_12 

Friedlein, J., Bielak, C. R., Böhnke, M., Bobbert, M., Mergheim, J., Steinmann, P., &; Meschut, G. (2023). Influence of plastic orthotropy on clinching of sheet metal. Materials Research Proceedings.https://doi.org/10.21741/9781644902417-17  

Bielak, C. R., Böhnke, M., Bobbert, M., &; Meschut, G. (2023). Numerical Investigation of the Coupled Friction Behavior in the Clinching Process Chain. In Lecture Notes in Mechanical Engineering. Springer Nature Switzerland.https://doi.org/10.1007/978-3-031-41341-4_15 

Bielak, C. R., Böhnke, M., Bobbert, M., &; Meschut, G. (2022). Experimental and Numerical Investigation on Manufacturing-Induced Pre-Strain on the Load-Bearing Capacity of Clinched Joints. Key Engineering Materials, 926, 1516–1526.https://doi.org/10.4028/p-5d009y 

Böhnke, M., Unruh, E., Sell, S., Bobbert, M., Hein, D., &; Meschut, G. (2022). Functionality Study of an Optical Measurement Concept for Local Force Signal Determination in High Strain Rate Tensile Tests. Key Engineering Materials, 926, 1564–1572.https://doi.org/10.4028/p-wpuzyw 

Böhnke, M., Bielak, C. R., Bobbert, M., &; Meschut, G. (2022). Development of a Modified Punch Test for Investigating the Failure Behavior in Sheet Metal Materials. In The Minerals, Metals &;amp; Materials Series. NUMISHEET 2022, Toronto, Kanada. Springer International Publishing.https://doi.org/10.1007/978-3-031-06212-4_52 

Böhnke, M., Bielak, C. R., Bobbert, M., &; Meschut, G. (2022). Experimental and numerical investigation of the influence of multiaxial loading conditions on the failure behavior of clinched joints. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications.https://doi.org/10.1177/14644207221145886 

Bielak, C. R., Böhnke, M., Bobbert, M., &; Meschut, G. (2022). Development of a Numerical 3D Model for Analyzing Clinched Joints in Versatile Process Chains. In The Minerals, Metals &;amp; Materials Series. Springer International Publishing.https://doi.org/10.1007/978-3-031-06212-4_15 

Bielak, C. R., Böhnke, M., Bobbert, M., &; Meschut, G. (2022). Numerical investigation of a friction  test to determine the friction  coefficients for the clinching process. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, Article 146442072210934.https://doi.org/10.1177/14644207221093468 

Neuser, M., Böhnke, M., Grydin, O., Bobbert, M., Schaper, M., &; Meschut, G. (2022). Influence of heat treatment on the suitability for clinching of the aluminium casting alloy AlSi9. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, Article 146442072210758.https://doi.org/10.1177/14644207221075838 

Kupfer, R., Köhler, D., Römisch, D., Wituschek, S., Ewenz, L., Kalich, J., Weiß, D., Sadeghian, B., Busch, M., Krüger, J., Neuser, M., Grydin, O., Böhnke, M., Bielak, C. R., &; Troschitz, J. (2022). Clinching of Aluminum Materials – Methods for the Continuous Characterization of Process, Microstructure and Properties. Journal of Advanced Joining Processes, 5, Article 100108.https://doi.org/10.1016/j.jajp.2022.100108 

Kupfer, R., Köhler, D., Römisch, D., Wituschek, S., Ewenz, L., Kalich, J., Weiß, D., Sadeghian, B., Busch, M., Krüger, J. T., Neuser, M., Grydin, O., Böhnke, M., Bielak, C.-R., &; Troschitz, J. (2022). Clinching of Aluminum Materials – Methods for the Continuous Characterization of Process, Microstructure and Properties. Journal of Advanced Joining Processes, Article 100108.https://doi.org/10.1016/j.jajp.2022.100108 

Kupfer, R., Köhler, D., Römisch, D., Wituschek, S., Ewenz, L., Kalich, J., Weiß, D., Sadeghian, B., Busch, M., Krüger, J. T., Neuser, M., Grydin, O., Böhnke, M., Bielak, C. R., &; Troschitz, J. (2022). Clinching of Aluminum Materials – Methods for the Continuous Characterization of Process, Microstructure and Properties. Journal of Advanced Joining Processes, 5, Article 100108.https://doi.org/10.1016/j.jajp.2022.100108 

Bielak, C. R., Böhnke, M., Bobbert, M., &; Meschut, G. (n.d.). Further development of a numerical method for analyzing the load capacity of clinched joints in versatile process chains. ESAFORM 2021, Lüttich.https://doi.org/10.25518/esaform21.4298 

Böhnke, M., Rossel, M. S., Bielak, C. R., Bobbert, M., &; Meschut, G. (2021). Concept development of a method for identifying friction coefficients for the numerical simulation of clinching processes. The International Journal of Advanced Manufacturing Technology.https://doi.org/10.1007/s00170-021-07986-4 

Rossel, M. S., Böhnke, M., Bielak, C. R., Bobbert, M., &; Meschut, G. (2021). Development of a Method for the Identification of Friction Coefficients in Sheet Metal Materials for the Numerical Simulation of Clinching Processes. Key Engineering Materials, 883, 81–88.https://doi.org/10.4028/www.scientific.net/kem.883.81 

Böhnke, M., Kappe, F., Bobbert, M., &; Meschut, G. (2021). Influence of various procedures for the determination of flow curves on the predictive accuracy of numerical simulations for mechanical joining processes. Materials Testing, 63(6), 493–500.https://doi.org/10.1515/mt-2020-0082 

Rossel, M. S., Böhnke, M., Bielak, C. R., Bobbert, M., &; Meschut, G. (2021). Development of a Method for the Identification of Friction Coefficients in Sheet Metal Materials for the Numerical Simulation of Clinching Processes. Sheet Metal 2021, 883, 81–88.https://doi.org/10.4028/www.scientific.net/KEM.883.81