A. Brosch, J. Rauhaus, O. Wallscheid, J. Böcker, and D. Zimmer, “Data-Driven Adaptive Torque Oscillation Compensation for Multi-Motor Drive Systems,”10.1109/ojia.2022.3171333__IEEE Open Journal of Industry Applications, 2022, doi:10.1109/ojia.2022.3171333 .

R. Unruh, F. Schafmeister, and J. Böcker, “Zero-Sequence Voltage Reduces DC-Link Capacitor Demand in Cascaded H-Bridge Converters for Large-Scale Electrolyzers by 40%,” presented at the 24th European Conference on Power Electronics and Applications (EPE’22 ECCE Europe), Hanover, Germany, 2022.

N. Förster et al., “An Open-Source FEM Magnetic Toolbox for Calculating Electric and Thermal Behavior of Power Electronic Magnetic Components,” in 2022 24th European Conference on Power Electronics and Applications (EPE’22 ECCE Europe), 2022, p. P.1-P.9.

D. Schröder and J. Böcker, Elektrische Antriebe – Regelung von Antriebssystemen, 5th ed. Springer Nature, 2021.

B. Strothmann, F. Schafmeister, and J. Böcker, “Common-Mode-Free Bidirectional Three-Phase PFC-Rectifier for Non-Isolated EV Charger,”10.1109/apec42165.2021.9487462__2021, doi:10.1109/apec42165.2021.9487462 .

A. Brosch, O. Wallscheid, and J. Böcker, “Model Predictive Control of Permanent Magnet Synchronous Motors in the Overmodulation Region Including Six-Step Operation,”10.1109/OJIA.2021.3066105__IEEE Open Journal of Industry Applications, vol. 2, pp. 47–63, 2021, doi:10.1109/OJIA.2021.3066105 .

E. G. Gedlu, O. Wallscheid, and J. Böcker, “Temperature estimation of electric machines using a hybrid model of feed-forward neural and low-order lumped-parameter thermal networks,”10.1109/IEMDC47953.2021.9449548__in 2021 IEEE International Electric Machines &; Drives Conference (IEMDC), 2021, pp. 1–8, doi:10.1109/IEMDC47953.2021.9449548 .

P. Rehlaender, F. Schafmeister, and J. Böcker, “Interleaved Single-Stage LLC Converter Design Utilizing Half- and Full-Bridge Configurations for Wide Voltage Transfer Ratio Applications,”10.1109/tpel.2021.3067843__IEEE Transactions on Power Electronics, vol. 36, no. 9, pp. 10065–10080, 2021, doi:10.1109/tpel.2021.3067843 .

B. Korthauer, P. Rehlaender, F. Schafmeister, and J. Böcker, “Design and Analysis of a Regenerative Snubber for a 2.2 kW Active-Clamp Forward Converter with Low-Voltage Output,”10.1109/apec42165.2021.9487130__2021, doi:10.1109/apec42165.2021.9487130 .

B. Strothmann, G. Book, F. Schafmeister, and J. Böcker, “Single-Phase Operation of Common-Mode-Free Bidirectional Three-Phase PFC-Rectifier for Non-Isolated EV Charger with Minimized DC-Link,” in PCIM Europe digital days 2021; International Exhibition and Conference for Power Electronics, Intelligent Motion, Renewable Energy and Energy Management, 2021, pp. 1–8.

D. Urbaneck, P. Rehlaender, J. Böcker, and F. Schafmeister, “LLC Converter in Capacitive Operation Utilizing ZCS for IGBTs – Theory, Concept and Verification of a 2 kW DC-DC Converter for EVs,” presented at the Applied Power Electronics Conference (APEC), Arizona, 2021.

M. Stender, O. Wallscheid, and J. Böcker, “Accurate Torque Control for Induction Motors by Utilizing a Globally Optimized Flux Observer,”10.1109/tpel.2021.3080129__IEEE Transactions on Power Electronics, vol. 36, no. 11, pp. 13261–13274, 2021, doi:10.1109/tpel.2021.3080129 .

M. Stender, O. Wallscheid, and J. Böcker, “Accurate Torque Estimation for Induction Motors by Utilizing a Hybrid Machine Learning Approach,”10.1109/pemc48073.2021.9432615__2021, doi:10.1109/pemc48073.2021.9432615 .

M. Stender, O. Wallscheid, and J. Böcker, “Combined Electrical-Thermal Gray-Box Model and Parameter Identification of an Induction Motor,”10.1109/iecon48115.2021.9589225__2021, doi:10.1109/iecon48115.2021.9589225 .

M. Stender, O. Wallscheid, and J. Böcker, “Gray-Box Loss Model for Induction Motor Drives,”10.1109/pemc48073.2021.9432491__2021, doi:10.1109/pemc48073.2021.9432491 .

S. Hanke, O. Wallscheid, and J. Böcker, “Comparison of Artificial Neural Network and Least Squares Prediction Models for Finite-Control-Set Model Predictive Control of a Permanent Magnet Synchronous Motor,”10.1049%2Ficp.2021.1122__2021, doi:10.1049%2Ficp.2021.1122 .

W. Kirchgässner, O. Wallscheid, and J. Böcker, “Data-Driven Permanent Magnet Temperature Estimation in Synchronous Motors with Supervised Machine Learning: A Benchmark,”10.1109/tec.2021.3052546__IEEE Transactions on Energy Conversion, vol. 36, no. 3, pp. 2059–2067, 2021, doi:10.1109/tec.2021.3052546 .

A. Brosch, O. Wallscheid, and J. Böcker, “Torque and Inductances Estimation for Finite Model Predictive Control of Highly Utilized Permanent Magnet Synchronous Motors,”10.1109/tii.2021.3060469__IEEE Transactions on Industrial Informatics, 2021, doi:10.1109/tii.2021.3060469 .

M. Hagemeyer, P. Wallmeier, F. Schafmeister, and J. Böcker, “Comparison of unidirectional Three- and Four-Wire based Boost PFC-Rectifier Topologies for Non-Isolated Three-Phase EV On-Board Chargers under Common-Mode Aspects,” in Proc. 36th IEEE Applied Power Electronics Conference (APEC), Phoenix, AZ, USA, 2021, pp. 569–576.

R. Unruh, J. Lange, F. Schafmeister, and J. Böcker, “Adaptive Zero-Sequence Voltage Injection for Modular Solid-State Transformer to Compensate for Asymmetrical Fault Conditions,”https://doi.org/10.23919/EPE21ECCEEurope50061.2021.9570542__presented at the 23rd European Conference on Power Electronics and Applications (EPE’21 ECCE Europe), Ghent, Belgium, 2021, doi:https://doi.org/10.23919/EPE21ECCEEurope50061.2021.9570542 .