Kullmer, G., Weiß, D., &; Schramm, B. (2024). An alternative and robust formulation of the fatigue crack growth rate curve for long cracks. Engineering Fracture Mechanics, 296, Article 109826.https://doi.org/10.1016/j.engfracmech.2023.109826 
LibreCat: /record/51737
DOI: 10.1016/j.engfracmech.2023.109826

Kullmer, G., Weiß, D., &; Schramm, B. (2024). Weiterentwicklung des Exponentialansatzes zur Beschreibung von Rissfortschrittskurven. 56. Tagung des DVM-Arbeitskreises Bruchmechanik und Bauteilsicherheit , Kassel.https://doi.org/10.48447/BR-2024-369 
LibreCat: /record/53394
DOI: 10.48447/BR-2024-369

Zirngibl, C., Goetz, S., &; Wartzack, S. (2024). Influence of process variations on clinch joint characteristics considering the effect of the nominal tool design. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering.https://doi.org/10.1177/09544089241259347 
LibreCat: /record/54797
DOI: 10.1177/09544089241259347

Busch, M., &; Hausotte, T. (2023). Simulation-based investigation of the metrological interface structural resolution capability of X-ray computed tomography scanners. Journal of Sensors and Sensor Systems, 12(1), 1–8.https://doi.org/10.5194/jsss-12-1-2023 
LibreCat: /record/36800
DOI: 10.5194/jsss-12-1-2023

Brosius, A., Ewenz, L., Stephan, R., &; Zimmermann, M. (2023). Anrisserkennung an geclinchten Proben während einer zyklischen Belastung unter Nutzung eines Scanning Laser Doppler Vibrometers. In M. Zimmermann (Ed.), Tagung Werkstoffprüfung 2022. Deutsche Gesellschaft für Materialkunde e.V. (DGM).
LibreCat: /record/38509

Ewenz, L., Kuczyk, M., Schöne, S., &; Zimmermann, M. (2023). Ableitung flacher Probengeometrien zur Abbildung mehraxialer Spannungszustände in Clinchverbindungen unter zyklischer Beanspruchung. In M. Zimmermann (Ed.), Tagung Werkstoffprüfung 2022. Deutsche Gesellschaft für Materialkunde e.V. (DGM).
LibreCat: /record/38511

Ewenz, L., Kühne, R., Schöne, S., &; Zimmermann, M. (2023). Untersuchungen zum Geometrie- und Frequenzeinfluss bei der Ermittlung zyklischer Kennwerte geclinchter Überlappverbindungen. In M. Zimmermann (Ed.), Tagung Werkstoffprüfung 2022. Deutsche Gesellschaft für Materialkunde e.V. (DGM).
LibreCat: /record/38507

Wituschek, S., Elbel, L., &; Lechner, M. (2023). Versatile self-piercing riveting with a tumbling superimposed punch. Materials Research Proceedings.https://doi.org/10.21741/9781644902479-122 
LibreCat: /record/46476
DOI: 10.21741/9781644902479-122

Köhler, D., Kupfer, R., Troschitz, J., &; Gude, M. (2023). Comparison of ex- and in-situ investigations of clinched single-lap shear specimens. Materials Research Proceedings.https://doi.org/10.21741/9781644902417-20 
LibreCat: /record/51190
DOI: 10.21741/9781644902417-20

Köhler, D., Stephan, R., Kupfer, R., Troschitz, J., Brosius, A., &; Gude, M. (2023). In-situ Computed Tomography and Transient Dynamic Analysis of a Single-Lap Shear Test with a Composite-Metal Clinch Point. In Lecture Notes in Production Engineering. Springer International Publishing.https://doi.org/10.1007/978-3-031-18318-8_28 
LibreCat: /record/51194
DOI: 10.1007/978-3-031-18318-8_28

Böhnke, M., Bielak, C. R., Friedlein, J., Bobbert, M., Mergheim, J., Steinmann, P., &; Meschut, G. (2023). A calibration method for failure modeling in clinching process simulations. Materials Research Proceedings.https://doi.org/10.21741/9781644902417-34 
LibreCat: /record/43462
DOI: 10.21741/9781644902417-34

Friedlein, J., Bielak, C. R., Böhnke, M., Bobbert, M., Mergheim, J., Steinmann, P., &; Meschut, G. (2023). Influence of plastic orthotropy on clinching of sheet metal. Materials Research Proceedings.https://doi.org/10.21741/9781644902417-17  
LibreCat: /record/43463
DOI: 10.21741/9781644902417-17 

Bielak, C. R., Böhnke, M., Bobbert, M., &; Meschut, G. (2023). Numerical Investigation of the Coupled Friction Behavior in the Clinching Process Chain. In Lecture Notes in Mechanical Engineering. Springer Nature Switzerland.https://doi.org/10.1007/978-3-031-41341-4_15 
LibreCat: /record/52614
DOI: 10.1007/978-3-031-41341-4_15

Butzhammer, L., Kappe, F., Meschut, G., &; Hausotte, T. (2023). Dynamic conformity assessment for joining force monitoring using Bayes filters. Materials Research Proceedings.https://doi.org/10.21741/9781644902417-48 
LibreCat: /record/52831
DOI: 10.21741/9781644902417-48

Wituschek, S., Kappe, F., Meschut, G., &; Lechner, M. (2023). Combination of versatile self-piercing riveting processes. Materials Research Proceedings.https://doi.org/10.21741/9781644902417-16 
LibreCat: /record/52821
DOI: 10.21741/9781644902417-16

Weiß, D., Duffe, T., Buczek, M., Kullmer, G., &; Schramm, B. (2023). Bruchmechanische Untersuchung des Dualphasenstahls HX unter Temperatureinfluss. Werkstoffprüfung 2023: Werkstoffe und Bauteile auf dem Prüfstand - Tagung, Berlin.https://doi.org/10.48447/WP-2023-244 
LibreCat: /record/51739
DOI: 10.48447/WP-2023-244

Neuser, M., Kappe, F., Ostermeier, J., Krüger, J. T., Bobbert, M., Meschut, G., Schaper, M., &; Grydin, O. (2022). Mechanical Properties and Joinability of AlSi9 Alloy Manufactured by TwinRoll Casting. Advanced Engineering Materials, 24(10), Article 2200874.https://doi.org/10.1002/adem.202200874 
LibreCat: /record/34207
DOI: 10.1002/adem.202200874

Friedlein, J., Mergheim, J., &; Steinmann, P. (2022). Influence of Kinematic Hardening on Clinch Joining of Dual-Phase Steel HX Sheet Metal. In The Minerals, Metals &;amp; Materials Series. Springer International Publishing.https://doi.org/10.1007/978-3-031-06212-4_31 
LibreCat: /record/34211
DOI: 10.1007/978-3-031-06212-4_31

Ewenz, L., Bielak, C. R., Otroshi, M., Bobbert, M., Meschut, G., &; Zimmermann, M. (2022). Numerical and experimental identification of fatigue crack initiation sites in clinched joints. Production Engineering, 16(2–3), 305–313.https://doi.org/10.1007/s11740-022-01124-z 
LibreCat: /record/34213
DOI: 10.1007/s11740-022-01124-z

Köhler, D., Kupfer, R., Troschitz, J., &; Gude, M. (2022). Clinching in In Situ CT—A Novel Validation Method for Mechanical Joining Processes. In The Minerals, Metals &; Materials Series. Springer International Publishing.https://doi.org/10.1007/978-3-031-06212-4_75 
LibreCat: /record/34212
DOI: 10.1007/978-3-031-06212-4_75