M. Busch and T. Hausotte, “Simulation-based investigation of the metrological interface structural resolution capability of X-ray computed tomography scanners,”10.5194/jsss-12-1-2023__Journal of Sensors and Sensor Systems, vol. 12, no. 1, pp. 1–8, 2023, doi:10.5194/jsss-12-1-2023 .

L. Butzhammer, F. Kappe, G. Meschut, and T. Hausotte, “Dynamic conformity assessment for joining force monitoring using Bayes filters,”10.21741/9781644902417-48__2023, doi:10.21741/9781644902417-48 .

F. Binder and T. Hausotte, “Über die Abgrenzung von Auflösungskonzepten in der industriellen Computertomografie,”10.1515/teme-2022-0065__tm - Technisches Messen, vol. 89, no. , pp. 20–24, 2022, doi:10.1515/teme-2022-0065 .

M. Busch, L. Butzhammer, and T. Hausotte, “Herausforderungen bei computertomografischen Untersuchungen von Fügeverbindungen,”10.1515/teme-2022-0061__tm - Technisches Messen, vol. 89, no. , pp. 83–88, 2022, doi:10.1515/teme-2022-0061 .

M. Busch and T. Hausotte, “Application of an edge detection algorithm for surface determination in industrial X-ray computed tomography,”10.1007/s11740-021-01100-z__Production Engineering, 2022, doi:10.1007/s11740-021-01100-z .

J. Schaude and T. Hausotte, “Atomic Force Microscope with an Adjustable Probe Direction and Integrated Sensing and Actuation,”10.1007/s41871-022-00143-9__Nanomanufacturing and Metrology, vol. 5, no. 2, pp. 139–148, 2022, doi:10.1007/s41871-022-00143-9 .

M. Busch, D. Köhler, T. Hausotte, R. Kupfer, J. Troschitz, and M. Gude, “Approach to Determine the Characteristic Dimensions of Clinched Joints by Industrial X-ray Computed Tomography,” presented at the 4 th Singapore International Non-destructive Testing Conference and Exhibition (SIN), 2022.

L. Butzhammer, A. M. Müller, and T. Hausotte, “Calibration of 3D scan trajectories for an industrial computed tomography setup with 6-DOF object manipulator system using a single sphere,”10.1088/1361-6501/ac9856__Measurement Science and Technology, vol. 34, no. 1, Art. no. 015403, 2022, doi:10.1088/1361-6501/ac9856 .

M. Busch, D. Köhler, T. Hausotte, R. Kupfer, J. Troschitz, and M. Gude, “Approach to Determine the Characteristic Dimensions of Clinched Joints by Industrial X-ray Computed Tomography,”10.58286/27519__e-Journal of Nondestructive Testing, vol. 27, no. 12, 2022, doi:10.58286/27519 .

R. Kupfer et al., “Clinching of Aluminum Materials – Methods for the Continuous Characterization of Process, Microstructure and Properties,”10.1016/j.jajp.2022.100108__Journal of Advanced Joining Processes, vol. 5, Art. no. 100108, 2022, doi:10.1016/j.jajp.2022.100108 .

M. Busch and T. Hausotte, “Determination of the Interface Structural Resolution of an Industrial X-Ray Computed Tomograph Using a Spherical Specimen and a Gap Specimen Consisting of Gauge Blocks,”10.4028/www.scientific.net/kem.883.41__Key Engineering Materials, vol. 883, pp. 41–48, 2021, doi:10.4028/www.scientific.net/kem.883.41 .

M. Neuser et al., “Joining suitability of cast aluminium for self-piercing riveting,”10.1088/1757-899x/1157/1/012005__IOP Conference Series: Materials Science and Engineering, Art. no. 012005, 2021, doi:10.1088/1757-899x/1157/1/012005 .