Busch, Matthias, and Tino Hausotte. “Simulation-Based Investigation of the Metrological Interface Structural Resolution Capability of X-Ray Computed Tomography Scanners.”10.5194/jsss-12-1-2023__Journal of Sensors and Sensor Systems, vol. 12, no. 1, Copernicus GmbH, 2023, pp. 1–8, doi:10.5194/jsss-12-1-2023.

Butzhammer, Lorenz, et al. “Dynamic Conformity Assessment for Joining Force Monitoring Using Bayes Filters.”10.21741/9781644902417-48__Materials Research Proceedings, Materials Research Forum LLC, 2023, doi:10.21741/9781644902417-48.

Binder, Felix, and Tino Hausotte. “Über Die Abgrenzung von Auflösungskonzepten in Der Industriellen Computertomografie.”10.1515/teme-2022-0065__Tm - Technisches Messen, vol. 89, no. , Walter de Gruyter GmbH, 2022, pp. 20–24, doi:10.1515/teme-2022-0065.

Busch, Matthias, et al. “Herausforderungen Bei Computertomografischen Untersuchungen von Fügeverbindungen.”10.1515/teme-2022-0061__Tm - Technisches Messen, vol. 89, no. , Walter de Gruyter GmbH, 2022, pp. 83–88, doi:10.1515/teme-2022-0061.

Busch, M., and T. Hausotte. “Application of an Edge Detection Algorithm for Surface Determination in Industrial X-Ray Computed Tomography.”10.1007/s11740-021-01100-z__Production Engineering, 2022, doi:10.1007/s11740-021-01100-z.

Schaude, Janik, and Tino Hausotte. “Atomic Force Microscope with an Adjustable Probe Direction and Integrated Sensing and Actuation.”10.1007/s41871-022-00143-9__Nanomanufacturing and Metrology, vol. 5, no. 2, Springer Science and Business Media LLC, 2022, pp. 139–48, doi:10.1007/s41871-022-00143-9.

Busch, Matthias, et al. Approach to Determine the Characteristic Dimensions of Clinched Joints by Industrial X-Ray Computed Tomography. 2022.

Butzhammer, Lorenz, et al. “Calibration of 3D Scan Trajectories for an Industrial Computed Tomography Setup with 6-DOF Object Manipulator System Using a Single Sphere.”10.1088/1361-6501/ac9856__Measurement Science and Technology, vol. 34, no. 1, 015403, IOP Publishing, 2022, doi:10.1088/1361-6501/ac9856.

Busch, Matthias, et al. “Approach to Determine the Characteristic Dimensions of Clinched Joints by Industrial X-Ray Computed Tomography.”10.58286/27519__E-Journal of Nondestructive Testing, vol. 27, no. 12, NDT.net, 2022, doi:10.58286/27519.

Kupfer, Robert, et al. “Clinching of Aluminum Materials – Methods for the Continuous Characterization of Process, Microstructure and Properties.”10.1016/j.jajp.2022.100108__Journal of Advanced Joining Processes, vol. 5, 100108, Elsevier BV, 2022, doi:10.1016/j.jajp.2022.100108.

Busch, M., and T. Hausotte. “Determination of the Interface Structural Resolution of an Industrial X-Ray Computed Tomograph Using a Spherical Specimen and a Gap Specimen Consisting of Gauge Blocks.”10.4028/www.scientific.net/kem.883.41__Key Engineering Materials, vol. 883, 2021, pp. 41–48, doi:10.4028/www.scientific.net/kem.883.41.

Neuser, Moritz, et al. “Joining Suitability of Cast Aluminium for Self-Piercing Riveting.”10.1088/1757-899x/1157/1/012005__IOP Conference Series: Materials Science and Engineering, 012005, 2021, doi:10.1088/1757-899x/1157/1/012005.