M. Hagemeyer, P. Wallmeier, F. Schafmeister, and J. Böcker, “Comparison of unidirectional Three- and Four-Wire based Boost PFC-Rectifier Topologies for Non-Isolated Three-Phase EV On-Board Chargers under Common-Mode Aspects,” in Proc. 36th IEEE Applied Power Electronics Conference (APEC), Phoenix, AZ, USA, 2021, pp. 569–576.
LibreCat: /record/30340

F. Schafmeister, “Transformerless On-Board Chargers at Three- and Single-Phase Operation: Compensation of LF Common-Mode Noise by the Internal DC/DC-Stage,” Power System Design (PSD) Web Magazine, 2021.
LibreCat: /record/30348

R. Tischendorf and H.-J. Schmid, “Influence of household regeneration techniques on the filtration efficiency of FF and surgical masks in the submicron size range,” presented at the EAC (European Aerosol Conference), UK, Ireland, 2021.
LibreCat: /record/25064

R. Tischendorf et al., “Influence of Atomization on Particle Formation in Spray Flames,” presented at the EAC (European Aerosol Conference), UK, Ireland, 2021.
LibreCat: /record/25066

R. Tischendorf et al., “Einfluss der Zerstäubung auf die Partikelsynthese in Sprayflammen,” presented at the Jahrestreffen der ProcessNet-Fachgruppe MPS, Paderborn, 2021.
LibreCat: /record/30364

E. Yigitbas, I. Jovanovikj, and G. Engels, “Simplifying Robot Programming using Augmented Reality and End-User Development,” 2021.
LibreCat: /record/21593

E. Yigitbas, S. Sauer, and G. Engels, “Using Augmented Reality for Enhancing Planning and Measurements in the Scaffolding Business,” 2021.
LibreCat: /record/21707

E. Yigitbas, S. Gorissen, N. Weidmann, and G. Engels, “Collaborative Software Modeling in Virtual Reality,” 2021.
LibreCat: /record/22706

P. Schubert, B. Hermann, and E. Bodden, “Lossless, Persisted Summarization of Static Callgraph, Points-To and Data-Flow Analysis,” 2021.
LibreCat: /record/21598

H. T. Do, P. Franke, S. Volpert, M. Klinksiek, M. Thome, and C. Held, “Measurement and modelling solubility of amino acids and peptides in aqueous 2-propanol solutions,”10.1039/d1cp00005e__Physical Chemistry Chemical Physics, vol. 23, no. 18, pp. 10852–10863, 2021, doi:10.1039/d1cp00005e .
LibreCat: /record/30208
DOI: 10.1039/d1cp00005e

M. Bothe, A. Fedorov, H. Frei, and E. Kenig, “Modeling and investigations of chemical absorption process for prevention of emergencies ,” presented at the International Conference on Mathematics in (bio)Chemical Kinetics and Engineering, Shanghai, China (online), 2021.
LibreCat: /record/26829

J. Friedlein, S. Wituschek, M. Lechner, J. Mergheim, and P. Steinmann, “Inverse parameter identification of an anisotropic plasticity model for sheet metal,”10.1088/1757-899X/1157/1/012004__IOP Conference Series: Materials Science and Engineering, vol. 1157, p. 012004, 2021, doi:10.1088/1757-899X/1157/1/012004 .
LibreCat: /record/30647
DOI: 10.1088/1757-899X/1157/1/012004

J. Popp, M. Wolf, T. Mattner, and D. Drummer, “Energy direction in ultrasonic impregnation of continuous fiber-reinforced thermoplastics,”10.3390/jcs5090239__Journal of Composites Science, vol. 5, p. 239, 2021, doi:10.3390/jcs5090239 .
LibreCat: /record/30645
DOI: 10.3390/jcs5090239

J. Kalich and U. Füssel, “Influence of the production process on the binding mechanism of clinched aluminum steel mixed compounds,”10.3390/jmmp5040105__Journal of Manufacturing and Materials Processing, vol. 5, p. 105, 2021, doi:10.3390/jmmp5040105 .
LibreCat: /record/30643
DOI: 10.3390/jmmp5040105

D. Pivovarov, J. Mergheim, K. Willner, and P. Steinmann, “Stochastic local FEM for computational homogenization of heterogeneous materials exhibiting large plastic deformations,”10.1007/s00466-021-02099-x__Computational Mechanics, 2021, doi:10.1007/s00466-021-02099-x .
LibreCat: /record/30644
DOI: 10.1007/s00466-021-02099-x

J. Friedlein, J. Mergheim, and P. Steinmann, “Anisotropic plasticitydamage material model for sheet metal — Regularised single surface formulation,”10.1002/pamm.202100068__PAMM, vol. 21, 2021, doi:10.1002/pamm.202100068 .
LibreCat: /record/30642
DOI: 10.1002/pamm.202100068

C. R. Bielak, M. Böhnke, M. Bobbert, and G. Meschut, “Further development of a numerical method for analyzing the load capacity of clinched joints in versatile process chains,”10.25518/esaform21.4298__presented at the ESAFORM 2021, Lüttich, doi:10.25518/esaform21.4298 .
LibreCat: /record/20807
DOI: 10.25518/esaform21.4298

D. Römisch, C. Zirngibl, B. Schleich, S. Wartzack, and M. Merklein, “Data-driven analysis of cold-formed pin structure characteristics in the context of versatile joining processes,”10.1088/1757-899X/1157/1/012077__IOP Conference Series: Materials Science and Engineering, vol. 1157, p. 012077, 2021, doi:10.1088/1757-899X/1157/1/012077 .
LibreCat: /record/30650
DOI: 10.1088/1757-899X/1157/1/012077

C. Steinfelder, J. Kalich, A. Brosius, and U. Füssel, “Numerical and experimental investigation of the transmission moment of clinching points,”10.1088/1757-899x/1157/1/012003__IOP Conference Series: Materials Science and Engineering, vol. 1157, p. 012003, 2021, doi:10.1088/1757-899x/1157/1/012003 .
LibreCat: /record/30648
DOI: 10.1088/1757-899x/1157/1/012003

J. Popp, T. Kleffel, D. Römisch, T. Papke, M. Merklein, and D. Drummer, “Fiber Orientation Mechanism of Continuous Fiber Reinforced Thermoplastics Hybrid Parts Joined with Metallic Pins,”10.1007/s10443-021-09892-0__Applied Composite Materials, vol. 28, pp. 951–972, 2021, doi:10.1007/s10443-021-09892-0 .
LibreCat: /record/30653
DOI: 10.1007/s10443-021-09892-0