M. Ostermann et al., “Integrating Prospective Scenarios in Life Cycle Engineering: Case Study of Lightweight Structures,”10.3390/en16083371__Energies, vol. 16, no. 8, Art. no. 3371, 2023, doi:10.3390/en16083371 .
LibreCat: /record/43464
DOI: 10.3390/en16083371

J. Lückenkötter, J. P. Leimbach, T. Stallmeister, T. Marten, and T. Tröster, “Feasibility Study of Compression Molding for Large Reinforcement Structures in the Commercial Vehicle Sector,”10.21741/9781644902479-27__in Materials Research Proceedings, Krakow, Poland, 2023, vol. 28, pp. 249–258, doi:10.21741/9781644902479-27 .
LibreCat: /record/44154
DOI: 10.21741/9781644902479-27

M. Ostermann et al., “Individualization of Public Transport – Integration of Technical and Social Dimensions of Sustainable Mobility,”10.1007/978-3-658-39438-7_25__in Towards the New Normal in Mobility, Duisburg, 2023, doi:10.1007/978-3-658-39438-7_25 .
LibreCat: /record/44502
DOI: 10.1007/978-3-658-39438-7_25

S. Gnaase, D. Niggemeyer, D. Lehnert, C. Bödger, and T. Tröster, “Comparative Study of the Influence of Heat Treatment and Additive Manufacturing Process (LMD &;amp; L-PBF) on the Mechanical Properties of Specimens Manufactured from 1.2709,”10.3390/cryst13020157__Crystals, vol. 13, no. 2, Art. no. 157, 2023, doi:10.3390/cryst13020157 .
LibreCat: /record/37200
DOI: 10.3390/cryst13020157

J. Grenz et al., “Integrating Prospective LCA in the Development of Automotive Components,”10.3390/su151310041__Sustainability, vol. 15, no. 13, Art. no. 10041, 2023, doi:10.3390/su151310041 .
LibreCat: /record/45782
DOI: 10.3390/su151310041

M. Ostermann, J. Behm, T. Marten, and T. Tröster, “NeMo.bil - Dekarbonisierung des Verkehrs mithilfe von Leichtbau-Fahrzeugschwärmen,” presented at the WerkstoffPlus Auto 13. Fachtagung für neue Fahrzeug- und Werkstoffkonzepte, Stuttgart, 2023.
LibreCat: /record/42459

S. Wu et al., “Adhesion properties of the hybrid system made of laser-structured aluminium EN AW 6082 and CFRP by co-bonding-pressing process,”10.1080/00218464.2023.2245758__The Journal of Adhesion, pp. 1–29, 2023, doi:10.1080/00218464.2023.2245758 .
LibreCat: /record/46495
DOI: 10.1080/00218464.2023.2245758

J. Freund et al., “Relationship between laser-generated micro- and nanostructures and the long-term stability of bonded epoxy-aluminum joints,”10.1080/00218464.2023.2223475__The Journal of Adhesion, pp. 1–31, 2023, doi:10.1080/00218464.2023.2223475 .
LibreCat: /record/46494
DOI: 10.1080/00218464.2023.2223475

S. Wu et al., “Intrinsic forming of hybrid parts made of laser-structured aluminium sheet and CFRP-Prepreg,” presented at the 23rd International Conference on Composite Materials (ICCM23 2023), 2023.
LibreCat: /record/48597

E. F. Akbulut Irmak, H. Hanses, I. Horwath, and T. Tröster, “Case Study III: Challenges of lightweight design, vehicles, and rescuers,” in Climate Protection, Resource Efficiency, and Sustainable Engineering, Bielefeld, Germany: transcript Verlag, 2023.
LibreCat: /record/48643
DOI: 10.14361/9783839463772-006

M. Triebus, Belastungsgerechte Auslegung automobiler Leichtbaustrukturen aus pressgehärtetem Stahl und kohlenstofffaserverstärktem Kunststoff. 2023.
LibreCat: /record/49155
DOI: 10.17619/UNIPB/1-1719

J. Lückenkötter, S. Aydin, T. Marten, and T. Tröster, “Analysis and Optimization of Joint Formation in Hybrid Compression Molding,” presented at the 23nd International Conference on Composite Materials (ICCM23 2023), Belfast, 2023.
LibreCat: /record/48586

T. Stallmeister, Verfahrensentwicklung zur einstufigen Herstellung von biegebelastbaren Hybridstrukturen im Fließpressprozess. 2023.
LibreCat: /record/50448
DOI: 10.17619/UNIPB/1-1670

L. Knorr, A. Jungeilges, F. Pfeifer, S. C. Burmeister, and H. Meschede, Regenerative Energien für einen effizienten Betrieb von Presshärtelinien. Aachen: 4. Aachener Ofenbau- und Thermoprozess-Kolloquium, 2023.
LibreCat: /record/48335

A. Jungeilges, Possibilities of Sustainable Heating Methods for Press Hardening Processes. Bad Nauheim: Car Body Parts - Automotive Circle Conference, 2023.
LibreCat: /record/49106

M. A. Kaiser, A. Reitz, S. Konrad, T. Meyer, T. Marten, and T. Tröster, “Untersuchung energieeffizienter und serientauglicher Erwärmungsstrategien mittels resistiver Erwärmung für den Presshärteprozess,” in Workshop Warmblechumformung, Fürth, 2023, vol. 18, pp. 99–118.
LibreCat: /record/49436

C. Bödger, S. Gnaase, D. Lehnert, and T. Tröster, “Investigation of the influence of process parameters on productivity in the LPBF process for the material Inconel 718,” presented at the Solid Freeform Fabrication, Austin, 2023.
LibreCat: /record/50742

D. Chalicheemalapalli Jayasankar, Advances In RTM Manufacturing Of Metal-FRP Hybrids By Self-Sealing And In-Mold Cleaning Techniques. 2023.
LibreCat: /record/50449

D. Chalicheemalapalli Jayasankar, T. Stallmeister, J. Lückenkötter, and T. Tröster, “In-Mold Assembly of Hybrid GMT-Steel Brake Pedals by Compression Molding,” presented at the 5th International Conference on Light Materials - Science and Technology LightMAT 2023, Trondheim, Norway , 2023.
LibreCat: /record/45831

F. Tuzgel et al., “Testing and modeling blast loading of a sandwich structure cored with a bio-inspired (balanus) core,”10.1016/j.tws.2022.109185__Thin-Walled Structures, vol. 175, Art. no. 109185, 2022, doi:10.1016/j.tws.2022.109185 .
LibreCat: /record/30894
DOI: 10.1016/j.tws.2022.109185

C. Linnig and T. Tröster, “Sauber recyceln- Innovative Verfahrenskombination mit Ultraschall ermöglicht sicheren Umgang mit recycelten Carbonfasern,” CU reports, 2022.
LibreCat: /record/33001

S. Haller, S. R. Tinkloh, T. Tröster, and R. Brandt, “The environmental impact on the strain rate dependent energy absorption capability of a hybrid crash absorber element,” presented at the 5th International Conference Hybrid 2022 Material &; Structures, 2022.
LibreCat: /record/37258

F. Pfeifer, T. Tröster, T. Marten, A. Dietrich, B. Nacke, and G. Grundmeier, “Investigation on hot sheet metal forming by means of a longitudinal flux inductor,” presented at the 6th International Conference on Steels in Cars and Trucks, Mailand, 2022.
LibreCat: /record/32819

S. Schweizer, Ein Beitrag zur Etablierung von Holzwerkstoffen im strukturellen Automobilbau anhand der Vorentwicklung zweier Karosseriebauteile aus Rotbuche. LibreCat University, 2022.
LibreCat: /record/32816
DOI: 10.17619/UNIPB/1-1314

J. A. Striewe, Haftung und Korrosionsbeständigkeit direktgefügter Hybridsysteme aus kohlenstofffaserverstärktem Epoxidharz und verzinktem Stahl für den Automobilleichtbau. 2022.
LibreCat: /record/31848

D. Voswinkel et al., “Co-bonding of carbon fibre-reinforced epoxy and galvanised steel with laser structured interface for automotive applications,”10.1080/09243046.2022.2143746__Advanced Composite Materials, pp. 1–16, 2022, doi:10.1080/09243046.2022.2143746 .
LibreCat: /record/34097
DOI: 10.1080/09243046.2022.2143746

T. Wu et al., “Experimental Analysis of Residual Stresses in CFRPs through Hole-Drilling Method: The Role of Stacking Sequence, Thickness, and Defects,”10.3390/jcs6050138__Journal of Composites Science, vol. 6, no. 5, Art. no. 138, 2022, doi:10.3390/jcs6050138 .
LibreCat: /record/31496
DOI: 10.3390/jcs6050138

T. Wu et al., “Characterization of residual stresses in fiber metal laminate interfaces - A combined approach applying hole-drilling method and energy-dispersive X-ray diffraction,”10.1016/j.compstruct.2022.116071__Composite Structures, Art. no. 116071, 2022, doi:10.1016/j.compstruct.2022.116071 .
LibreCat: /record/32814
DOI: 10.1016/j.compstruct.2022.116071

S. Martin, C. R. Bielak, M. Bobbert, T. Tröster, and G. Meschut, “Numerical investigation of the clinched joint loadings considering the initial pre-strain in the joining area,”10.1007/s11740-021-01103-w__Production Engineering, 2022, doi:10.1007/s11740-021-01103-w .
LibreCat: /record/29951
DOI: 10.1007/s11740-021-01103-w

S. Martin, K. Kurtusic, and T. Tröster, “Influence of the Surrounding Sheet Geometry on a Clinched Joint,”Â  https://doi.org/10.4028/p-09md1c__Key Engineering Materials, vol. 927, 2022, doi:Â  https://doi.org/10.4028/p-09md1c .
LibreCat: /record/32813
DOI:   https://doi.org/10.4028/p-09md1c

T. Stallmeister and T. Tröster, “In-Mold-Assembly of Hybrid Bending Structures by Compression Molding,”10.4028/p-5fxp53__Key Engineering Materials, vol. 926, pp. 1457–1467, 2022, doi:10.4028/p-5fxp53 .
LibreCat: /record/32869
DOI: 10.4028/p-5fxp53

M. Triebus, M. Ostermann, T. Tröster, and I. Horwath, “Advanced Automotive Components by Fiber-Metal-Laminates,” presented at the Materials in Car Body Engineering 2022, Bad Nauheim, 2022.
LibreCat: /record/32871

M. Ostermann et al., “Integrating Future Energy, Material and Production Scenarios in Life Cycle Engineering of Automotive Lightweight Structures,” presented at the 17th Conference on Sustainable Development of Energy, Water and Environment Systems, Paphos, Cyprus, 2022.
LibreCat: /record/34085

M. Ostermann et al., “Individualisierung des ÖPNV - Integration technischer und sozialer Dimensionen nachhaltiger Mobilität,” presented at the 14. Wissenschaftsforum Mobilität, Duisburg, 2022.
LibreCat: /record/32875

A. Delp et al., “Influence of laser-generated surface micro-structuring on the intrinsically bonded hybrid system CFRP-EN AW 6082- on its corrosion properties,”10.1016/j.compstruct.2022.115238__Composite Structures, vol. 285, Art. no. 115238, 2022, doi:10.1016/j.compstruct.2022.115238 .
LibreCat: /record/30510
DOI: 10.1016/j.compstruct.2022.115238

F. Pfeifer, A. Jungeilges, and J. Behm, “Strom statt Gas: Nachhaltige Herstellung von Karosseriebauteilen,” Transforming Economies, 2022.
LibreCat: /record/49323

M. Merten, T. Klöppel, A. Haufe, M. A. Kaiser, J.-N. Wesendahl, and S. Konrad, “Gekoppelte Simulation des resistiven Schnellerwärmens für Fertigungsprozesse mit integrierter Wärmebehandlung am Beispiel der Titanlegierung Ti-6Al-4V,” in Workshop Warmblechumformung, Fürth, 2022, vol. 17.
LibreCat: /record/49424

M. A. Kaiser et al., “Heat transfer coefficient investigation for hot die quenching process of Ti-6Al-4V alloy,” presented at the Titanium USA 2022 Conference , Orlando, 2022.
LibreCat: /record/49433

M. A. Kaiser, J.-N. Wesendahl, and T. Meyer, “Isothermal hot forming of Titanium sheet metal - From parameter identification to custom parts,” presented at the Infotag Automotive and Aerospace Applications, Berlin.
LibreCat: /record/49435

C. Bödger, C. Weiss, E. Schiefer, D. Heussen, and C. Haefner, “Evaluation of the Ecological Footprint for Parts from AlSi10Mg manufactured by Laser Powder Bed Fusion,” presented at the Solid Freeform Fabrication, Austin, 2022.
LibreCat: /record/50744

M. Triebus et al., “Forming Simulation of Tailored Press Hardened Parts,” presented at the 13th European LS-DYNA Conference 2021, Ulm, 2021.
LibreCat: /record/28440

T. Tröster, F. Pfeifer, B. Nacke, and A. Dietrich, Großserientaugliche induktive Platinenerwärmung für den Warmformprozess, vol. 38. Düsseldorf: Forschungsvereinigung Stahlanwendung e.V., 2021.
LibreCat: /record/28461

S. R. Tinkloh, T. Wu, T. Tröster, and T. Niendorf, “Development of a submodel technique for FFT-based solvers in micromechanical analysis,” presented at the 2nd International Conference on Theoretical, Analytical and Computational Methods for Composite Materials and Composite Structures (online), 2021.
LibreCat: /record/21442

A. A. Camberg, T. Tröster, and C. Latuske, “Development of a hybrid crash-relevant car body component with load-adapted thickness properties: Design, manufacturing and testing,” presented at the Conference on Future Production of Hybrid Structures (FPHS 2020), Wolfsburg, 2021.
LibreCat: /record/20857
DOI: https://doi.org/10.1007/978-3-662-62924-6_28

A. A. Camberg, T. Tröster, N. Wingenbach, C. Hielscher, and J. Grenz, “A new numerical method for potential anaylsis and design of hybrid components from full vehicle simulations: Implementation and component design,” presented at the Conference on Future Production of Hybrid Structures (FPHS 2020), Wolfsburg, 2021.
LibreCat: /record/20858
DOI: https://doi.org/10.1007/978-3-662-62924-6_30

M. Triebus, J. Gierse, T. Marten, and T. Tröster, “A new Device for Determination of Forming-Limit-Curves under Hot-Forming Conditions,”10.1088/1757-899x/1157/1/012052__IOP Conference Series: Materials Science and Engineering, Art. no. 012052, 2021, doi:10.1088/1757-899x/1157/1/012052 .
LibreCat: /record/22518
DOI: 10.1088/1757-899x/1157/1/012052

C. Linnig and T. Tröster, Entwicklung eines neuartigen Reinigungsverfahrens für recycelte Kohlenstofffasern. Osnabrück: Deutsche Bundesstiftung Umwelt (DBU), 2021.
LibreCat: /record/29807

T. Wu, S. R. Tinkloh, T. Tröster, W. Zinn, and T. Niendorf, “Measurement and Analysis of Residual Stresses and Warpage in Fiber Reinforced Plastic and Hybrid Components,”10.3390/met11020335__Metals, Art. no. 335, 2021, doi:10.3390/met11020335 .
LibreCat: /record/24131
DOI: 10.3390/met11020335

S. R. Tinkloh, T. Wu, T. Tröster, and T. Niendorf, “The Effect of Fiber Waviness on the Residual Stress State and Its Prediction by the Hole Drilling Method in Fiber Metal Laminates: A Global-Local Finite Element Analysis,”10.3390/met11010156__Metals, Art. no. 156, 2021, doi:10.3390/met11010156 .
LibreCat: /record/21064
DOI: 10.3390/met11010156

A. Magnier, T. Wu, S. R. Tinkloh, T. Tröster, B. Scholtes, and T. Niendorf, “On the reliability of residual stress measurements in unidirectional carbon fibre reinforced epoxy composites,”10.1016/j.polymertesting.2021.107146__Polymer Testing, Art. no. 107146, 2021, doi:10.1016/j.polymertesting.2021.107146 .
LibreCat: /record/24130
DOI: 10.1016/j.polymertesting.2021.107146

M. Triebus and T. Tröster, “HyOpt - Optimization-Based Development of Hybrid Materials,” presented at the 9th NRW Nano Conference - Innovations in Materials and Applications, Web, 2021.
LibreCat: /record/21726

A. A. Camberg, T. Erhart, and T. Tröster, “A Generalized Stress State and Temperature Dependent Damage Indicator Framework for Ductile Failure Prediction in Heat-Assisted Forming Operations,”10.3390/ma14175106__Materials, vol. 14, no. 17, Art. no. 5106, 2021, doi:10.3390/ma14175106 .
LibreCat: /record/33895
DOI: 10.3390/ma14175106

A. A. Camberg, Festigkeitssteigerung von Aluminiumblechformteilen der 5000-Serie durch Erweiterung der Formgebungsgrenzen stark kaltverfestigter Ausgangswerkstoffe, vol. 2021,52. Shaker Verlag, 2021.
LibreCat: /record/37579
DOI: 10.2370/9783844082715

J. Huber, Beitrag zur Reduzierung der Fehlerhäufigkeit bei der Online-Lackierung von SMC-Außenhautbauteilen, vol. 2021,50. Shaker Verlag, 2021.
LibreCat: /record/37586

S. Pöhler, Konzeptionierung und Auslegung eines Vorderachsträgers in hybrider Leichtbauweise im C-Segment, vol. 2021,49. Shaker Verlag, 2021.
LibreCat: /record/37584

C. Steinfelder, S. Martin, A. Brosius, and T. Tröster, “Load Path Transmission in Joining Elements,”10.4028/www.scientific.net/kem.883.73__Key Engineering Materials, pp. 73–80, 2021, doi:10.4028/www.scientific.net/kem.883.73 .
LibreCat: /record/24541
DOI: 10.4028/www.scientific.net/kem.883.73

S. Martin and T. Tröster, “Joint point loadings in car bodies – the influence of manufacturing tolerances and scatter in material properties,”10.25518/esaform21.3801__ESAFORM 2021, 2021, doi:10.25518/esaform21.3801 .
LibreCat: /record/24548
DOI: 10.25518/esaform21.3801

T. Stallmeister, S. Martin, T. Marten, and T. Tröster, “Experimental investigation on lightweight potentials of fiber-metal-laminates for automotive battery cases,” presented at the Automotive Circle conference – Battery Systems in Car Body Engineering 2021, Bad Nauheim, 2021.
LibreCat: /record/26994

A. A. Camberg, T. Erhart, and T. Tröster, “A Generalized Stress State and Temperature Dependent Damage Indicator Framework for Ductile Failure Prediction in Heat-Assisted Forming Operations,”10.3390/ma14175106__Materials, Art. no. 5106, 2021, doi:10.3390/ma14175106 .
LibreCat: /record/24009
DOI: 10.3390/ma14175106

A. Andreiev et al., “Soft-magnetic behavior of laser beam melted FeSi3 alloy with graded cross-section,”10.1016/j.jmatprotec.2021.117183__Journal of Materials Processing Technology, Art. no. 117183, 2021, doi:10.1016/j.jmatprotec.2021.117183 .
LibreCat: /record/23898
DOI: 10.1016/j.jmatprotec.2021.117183

D. Ahlers, Parameter- und Prozessoptimierung für den additiven Fertigungsprozess im Pulverbett am Beispiel der Legierung Ti6Al4V , vol. 19. Shaker, 2020.
LibreCat: /record/21209

C. Hielscher, J. Grenz, A. A. Camberg, and N. Wingenbach, “Ansatz zur effizienteren Auslegung von Hybridbauteilen,” ATZ - Automobiltechnische Zeitschrift, pp. 60–65, 2020.
LibreCat: /record/17812
DOI: 10.1007/s35148-020-0284-8

C. Hielscher, J. Grenz, A. A. Camberg, and N. Wingenbach, “Approach to More Efficient Design of Hybrid Components,” ATZ worldwide, pp. 58–61, 2020.
LibreCat: /record/17813
DOI: 10.1007/s38311-020-0267-0

T. Wu, S. R. Tinkloh, T. Tröster, and W. Zinn, “Residual stress measurement in GFRP/steel hybrid components,” in Proceedings of the 4th International Conference Hybrid 2020 Materials and Structures, Web-Conference, Germany, 2020.
LibreCat: /record/20843

A. A. Camberg and T. Tröster, “A simplified method for the evaluation of the layer compression test using one 3D digital image correlation system and considering the material anisotropy by the equibiaxial Lankford parameter.” 2020.
LibreCat: /record/20854
DOI: 10.1088/1757-899X/967/1/012077

A. A. Camberg, T. Erhart, and T. Tröster, “Predicting fracture at non-isothermal forming conditions: A temperature dependent extension of the LS-DYNA GISSMO fracture indicator framework,” presented at the International Deep-Drawing Research Group (IDDRG 2020) , Seoul, South Korea, 2020.
LibreCat: /record/20856
DOI: 10.13140/RG.2.2.23924.17288

S. Schweizer, E. F. Akbulut Irmak, and T. Tröster, “Wood-based materials as a sustainable alternative for future car body construction,” presented at the Future Materials, vitual, 2020.
LibreCat: /record/21712

M. Triebus and T. Tröster, “A Holistic Approach to Optimization-Based Design of Hybrid Materials,” in Proceedings 4th International Conference Hybrid Materials &; Structures, Web-Conference, 2020.
LibreCat: /record/16939

L. Claes, E. Baumhögger, T. Rüther, J. Gierse, T. Tröster, and B. Henning, “Reduction of systematic measurement deviation in acoustic absorption measurement systems,” in Fortschritte der Akustik - DAGA 2020, 2020, pp. 1077–1080.
LibreCat: /record/15490

S. R. Tinkloh, T. Wu, T. Tröster, and T. Niendorf, “Numerical investigation of the hole-drilling method applied to intrinsic manufactured metal-CFRP hybrids,” presented at the 4th International Conference Hybrid 2020 Materials and Structures, Web-Conference, Germany, 2020.
LibreCat: /record/16930

T. Wu, S. R. Tinkloh, T. Tröster, W. Zinn, and T. Niendorf, “Determination and Validation of Residual Stresses in CFRP/Metal Hybrid Components Using the Incremental Hole Drilling Method,”10.3390/jcs4030143__Journal of Composites Science, Art. no. 143, 2020, doi:10.3390/jcs4030143 .
LibreCat: /record/20842
DOI: 10.3390/jcs4030143

A. Huxol, Beitrag zur Qualitätssicherung in der additiven Fertigung individueller Produkte aus CoCr-Legierungen, vol. 2020,42. Shaker Verlag, 2020.
LibreCat: /record/37585

S. R. Tinkloh, T. Wu, T. Tröster, and T. Niendorf, “A micromechanical-based finite element simulation of process-induced residual stresses in metal-CFRP-hybrid structures,”10.1016/j.compstruct.2020.111926__Composite Structures, vol. 238, Art. no. 111926, 2020, doi:10.1016/j.compstruct.2020.111926 .
LibreCat: /record/15945
DOI: 10.1016/j.compstruct.2020.111926

D. Chalicheemalapalli Jayasankar, T. Stallmeister, Z. Wang, and T. Tröster, “MANUFACTURING OF HYBRID COMPONENTS BY VARTM-PROCESS USING NEW SEALING TECHNIQUE DEVELOPED,” in Hybrid 2020 Materials and Structures, Digital, 2020, pp. 167–172.
LibreCat: /record/27417

D. Ahlers and T. Tröster, Schlussbericht zum Vorhaben “Additive Leichtbaustrukturen für Flugzeugkomponenten”f: Verbund: KOBFS - Kostenoptimierter Baukasten für Flügelsysteme. TIB: Universität Paderborn, 2019.
LibreCat: /record/21210
DOI: https://doi.org/10.2314/KXP:1695591887

F. Pfeifer, A. Dietrich, T. Marten, T. Tröster, and B. Nacke, “Investigation on Inductive Heating of Sheet Metal for an Industrial Hot Stamping Process,” in Proceedings of 7th International Conference on Hot Sheet Metal Forming of High-Performance Steel, Luleå, 2019, pp. 585–593.
LibreCat: /record/16793

J. A. Striewe, R. Thomas, F. Fischer, T. Wiens, and T. Tröster, “Energieabsorptions- und Versagensverhalten eines automobilen Seitenschwellers mit lokaler Verstärkung aus kohlenstofffaserverstärktem Kunststoff nach Alterung,” presented at the Tagung Werkstoffprüfung 2019, Neu-Ulm, 2019.
LibreCat: /record/16794

D. Ahlers and T. Tröster, Performance Parameters and HIP Routes for additively manufactured titanium alloy Ti6Al4V. Maastricht: EuroPM, 2019.
LibreCat: /record/16825

A. A. Camberg and C. Hielscher, “A holistic approach to the lightweight design of tailored structural components using the example of a hybrid A-pillar,” in Aachen Body Engineering Days 2019, Aachen, 2019.
LibreCat: /record/16826

A. A. Camberg and T. Tröster, “Challenges in fracture modeling under non-isothermal forming conditions using the example of a new forming process for aluminum blanks,” in 26. Sächsische Fachtagung Umformtechnik, Dresden, 2019.
LibreCat: /record/16827

S. R. Tinkloh, T. Wu, T. Tröster, and T. Niendorf, “A micromechanical based finite element simulation of process induced residual stresses in metal-CFRP-hybrid structures,” presented at the 22nd International Conference on Composite Structures (ICC) and 1st Chinese Conference on Composite Structures (CCC), Wuhan, 2019.
LibreCat: /record/16831

A. A. Camberg, T. Tröster, F. Bohner, and J. Tölle, “Predicting plasticity and fracture of severe pre-strained EN AW-5182 by Yld2000 yield locus and Hosford-Coulomb fracture model in sheet forming applications,” IOP Conference Series: Materials Science and Engineering, vol. 651, p. 012057, 2019.
LibreCat: /record/15875
DOI: 10.1088/1757-899X/651/1/012057

E. F. Akbulut Irmak and T. Tröster, “Fracture prediction of additively manufactured AlSi10Mg materials,” Procedia Structural Integrity, pp. 190–197, 2019.
LibreCat: /record/15950
DOI: 10.1016/j.prostr.2019.12.101

E. F. Akbulut Irmak, J. Hanses, S. Schweizer, and T. Tröster, “Modeling the Energy Absorption Characteristics of Wood Crash Elements,” presented at the 12th European LS-DYNA Conference, Koblenz, 2019.
LibreCat: /record/15976

T. Marten and T. Tröster, Einsatz neuartiger Stähle und Generierung gradierter Leichtbaustrukturen im Presshärteprozess. Düsseldorf: Forschungsvereinigung Stahlanwendung e.V. im Stahl Zentrum, 0, Verlag und Vertriebsgesellschaft mbH, 2019.
LibreCat: /record/16029

M. Triebus, S. Bienia, T. Marten, T. Tröster, and K. Dröder, “Press Hardening Integrated Structuring for Hybrid Components,” presented at the 7th International Conference on Hot Sheet Metal Forming of High-Performance Steel, Lulea, Sweden, 2019.
LibreCat: /record/16030

A. A. Camberg, I. Stratmann, and T. Tröster, “TAILORED STACKED HYBRIDS – AN OPTIMIZATION-BASED APPROACH IN MATERIAL DESIGN FOR FURTHER IMPROVEMENT IN LIGHTWEIGHT CAR BODY STRUCTURES,” in Technologies for economical and functional lightweight design, Berlin, Heidelberg, 2019.
LibreCat: /record/13436
DOI: 10.1007/978-3-662-58206-0_12

T. Stallmeister, D. Chalicheemalapalli Jayasankar, Z. Wang, and T. Tröster, “Self-sealing tool concept for RTM-processes,” presented at the 22nd International Conference on Composite Materials (ICCM22 2019), Melbourne , 2019.
LibreCat: /record/16032

T. Stallmeister, D. Chalicheemalapalli Jayasankar, Z. Wang, and T. Tröster, “Selbstabdichtendes Werkzeugkonzept für RTM-Prozesse,” presented at the Tagung Werkstoffprüfung 2019, Neu-Ulm, 2019.
LibreCat: /record/16033

H. Opdemom, Experimentelle Untersuchung einse modifzierten Nasspressverfahrens für die Herstellung von hybriden Metall-Faserverbundkunststoff-Bauteilen, vol. 2019,35. Shaker Verlag, 2019.
LibreCat: /record/41958

M. P. Stolzenburg, Experimental Basis for an Orthotropic Failure Model for Application in Crash Simulation. 2019.
LibreCat: /record/41960
DOI: 10.17619/UNIPB/1-572

A. A. Camberg, M. Striewe, T. Tröster, F. Bohner, and J. Tölle, “Investigation of ductility and fracture behavior of EN AW-5182  at non-isothermal forming conditions,” presented at the 5th MATFEM Conference, Schloss Hohenkammer, 2019.
LibreCat: /record/16027

J. A. Striewe, T. Tröster, J. Kowatz, G. Meschut, R. Grothe, and G. Grundmeier, Analyse und Optimierung des Korrosions- und Alterungsverhaltens von hybriden Strukturen aus Metallen und CFK. Hannover: Europäische Forschungsgesellschaft für Blechverarbeitung, 2019.
LibreCat: /record/16795

R. Grothe, J. A. Striewe, J. Kowatz, G. Grundmeier, T. Tröster, and G. Meschut, “Analyse und Optimierung des Korrosions- und Alterungsverhaltens von hybriden Strukturen aus Metallen und CFK,” presented at the 39. EFB-Kolloquium, Bad Boll , 2019.
LibreCat: /record/16028

A. A. Camberg, T. Tröster, N. Sotirov, J. Tölle, and F. Bohner, “Investigation of ductility and damage characteristics of EN AW-5182  at non-isothermal forming conditions,” in Materials Science and Engineering (MSE) Congress 2018, Darmstadt, 2018.
LibreCat: /record/19868

L. Claes, H. Zeipert, P. Koppa, T. Tröster, and B. Henning, Additiv gefertigte, akustische Diffusor-Strukturen für Ultraschallanwendungen. Workshop “Messtechnische Anwendungen von Ultraschall”, Drübeck, 2018.
LibreCat: /record/6594

A. A. Camberg, K. Engelkemeier, J. Dietrich, and T. Heggemann, “Top-down design of tailored fiber-metal laminates,” Lightweight Design worldwide, vol. 11, no. 2, pp. 24–29, 2018.
LibreCat: /record/15876
DOI: 10.1007/s41777-018-0004-1

N. Weiß-Borkowski et al., “Forming limit curves of  determined in high-speed Nakajima tests and predicted by two different strain-rate-sensitive models,” 2018.
LibreCat: /record/15960
DOI: 10.1063/1.5035024

A. Tasdemirci et al., “Crushing behavior and energy absorption performance of a bio-inspired metallic structure: Experimental and numerical study,” Thin-Walled Structures, pp. 547–555, 2018.
LibreCat: /record/15977
DOI: 10.1016/j.tws.2018.07.051

A. A. Camberg and T. Tröster, “Optimization-based material design of tailored stacked hybrids for further improvement in lightweight car body structures,” in HYBRID - MATERIALS AND STRUCTURES 2018 - PROCEEDINGS, Bremen, 2018.
LibreCat: /record/16034