Dymel, C. (2024). Modellbasierte Entwicklung von Ultraschallwandlern unter der Berücksichtigung von Nichtlinearitäten (Vol. 16). Shaker Verlag.
LibreCat: /record/52611

Aimiyekagbon, O. K., Bender, A., Hemsel, T., &; Sextro, W. (2024). Diagnostics of Piezoelectric Bending Actuators Subjected to Varying Operating Conditions. Electronics, 13(3), Article 521.https://doi.org/10.3390/electronics13030521 
LibreCat: /record/51518
DOI: 10.3390/electronics13030521

Schütte, J., &; Sextro, W. (2023). Einfluss der Radhubkinematik auf den Reifenverschleiß. In 20. VDI-Fachtagung Reifen - Fahrwerk - Fahrbahn (Vol. 2425, pp. 165–180). VDI Verlag GmbH.
LibreCat: /record/51338

Scheidemann, C., Hemsel, T., Friesen, O., Claes, L., &; Sextro, W. (2023). Influence of Temperature and Pre-Stress on the Piezoelectric Material Behavior of Ring-Shaped Ceramics. International Conference on Functional Materials &; Devices 2023 (ICFMD 2023), Incheon, Korea.
LibreCat: /record/51118

Scheidemann, C., Hemsel, T., Friesen, O., Claes, L., &; Sextro, W. (2023). Influence of Temperature and Pre-Stress on the Piezoelectric Material Behavior of Ring-Shaped Ceramics. 7th International Conference on Advanced Electromaterials (ICAE 2023), Jeju, Korea.
LibreCat: /record/51117

Scheidemann, C., Hagedorn, O. E. C., Hemsel, T., &; Sextro, W. (2023). Experimental Investigation of Bond Formation and Wire Deformation in the Ultrasonic Wire Bonding Process. International Conference on Functional Materials &; Devices 2023 (ICFMD 2023), Jeju, Korea.
LibreCat: /record/51119

Sehlmeyer, B., Kampmann, R., Scheidemann, C., Hemsel, T., &; Getzlaff, M. (2023). Burst Mode of Ultrasonic Resonant Oscillations for Stimulation and Destruction of Tumor Cells. In Deutsche Physikalische Gesellschaft e. V. (Ed.), Frühjahrstagung 2023, Sektion Kondensierte Materie (SKM).
LibreCat: /record/47234

Kampmann, R., Sehlmeyer, B., Scheidemann, C., Hemsel, T., &; Getzlaff, M. (2023). Burst Mode Characteristics of an Ultrasonic Transducer for Treatment of Cancer Cells. In Deutsche Physikalische Gesellschaft e. V. (Ed.), Frühjahrstagung 2023, Sektion Kondensierte Marterie (SKM).
LibreCat: /record/47235

Aimiyekagbon, O. K., Löwen, A., Bender, A., Muth, L., &; Sextro, W. (2023). Expert-Informed Hierarchical Diagnostics of Multiple Fault Modes of a Spacecraft Propulsion System. Proceedings of the Asia Pacific Conference of the PHM Society 2023 , 4(1).https://doi.org/10.36001/phmap.2023.v4i1.3596 
LibreCat: /record/47116
DOI: 10.36001/phmap.2023.v4i1.3596

Wohlleben, M. C., Muth, L., Peitz, S., &; Sextro, W. (2023). Transferability of a discrepancy model for the dynamics of electromagnetic oscillating circuits. Proceedings in Applied Mathematics and Mechanics.https://doi.org/10.1002/pamm.202300039 
LibreCat: /record/46813
DOI: 10.1002/pamm.202300039

Bender, A. (2023). Model-based condition monitoring of piezoelectric bending actuators. Sensors and Actuators A: Physical, 357, Article 114399.https://doi.org/10.1016/j.sna.2023.114399 
LibreCat: /record/44672
DOI: 10.1016/j.sna.2023.114399

Dunst, P. (2023). Modellierung und Optimierung reibungsbasierter Ultraschall-Pulvertransportprozesse (Vol. 14). Shaker.
LibreCat: /record/41970

Althoff, S. (2023). Predicting the Bond Quality of Heavy Copper Wire Bonds using a Friction Model Approach (Vol. 15). Shaker.
LibreCat: /record/41971

Scheidemann, C., Hemsel, T., &; Sextro, W. (2022). Modellbasierte Ermittlung optimaler Prozessparameter für neuartige Ultraschallbondverbindungen. LibreCat University.https://doi.org/10.2314/KXP:1879655276 
LibreCat: /record/52045
DOI: 10.2314/KXP:1879655276

Reinke, K., Bender, A., Meyer, T., Sextro, W., &; Kimotho, J. K. (2022). Patent DE 10 2017 000 926 : Gerät mit wenigstens einem elastisch verformbaren Bauteil, insbesondere einem Gummi-Metall-Lager und mit einer Einrichtung zur Feststellung des Beginns einer verschleißbedingten Bauteil-Restnutzungsdauer, sowie Verfahren zur Bestimmung der Bauteil-Restnutzungsdauer.
LibreCat: /record/9980

Scheidemann, C., Kirsch, O., Hemsel, T., &; Sextro, W. (2022). Experimental Investigation of Multidimensional Ultrasonic Heavy Wire Bonding. 2022 IEEE 9th Electronics System-Integration Technology Conference (ESTC).https://doi.org/10.1109/estc55720.2022.9939478 
LibreCat: /record/34104
DOI: 10.1109/estc55720.2022.9939478

Aimiyekagbon, O. K., Bender, A., &; Sextro, W. (2022). On the applicability of time series features as health indicators for technical systems operating under varying conditions.  Condition Monitor, 425, 5–10.
LibreCat: /record/47159

Hagedorn, O. E. C., Broll, M., Kirsch, O., Hemsel, T., &; Sextro, W. (2022). Experimental Investigation of the Influence of different Bond Tool Grooves on the Bond Quality for Ultrasonic Thick Wire Bonding. CIPS 2022 - 12th International Conference on Integrated Power Electronics Systems, 138–143.
LibreCat: /record/30371

Wohlleben, M. C., Bender, A., Peitz, S., &; Sextro, W. (2022). Development of a Hybrid Modeling Methodology for Oscillating Systems with Friction. In Machine Learning, Optimization, and Data Science. Springer International Publishing.https://doi.org/10.1007/978-3-030-95470-3_8 
LibreCat: /record/29727
DOI: 10.1007/978-3-030-95470-3_8

Schemmel, R. (2022). Enhanced process development by simulation of ultrasonic heavy wire bonding (Vol. 13). Shaker.https://doi.org/10.17619/UNIPB/1-1280 
LibreCat: /record/34272
DOI: 10.17619/UNIPB/1-1280

Hemsel, T., &; Twiefel, J. (2022). Piezoelectric Ultrasonic Power Transducers. In Reference Module in Materials Science and Materials Engineering. Elsevier.https://doi.org/10.1016/b978-0-12-819728-8.00047-4 
LibreCat: /record/33500
DOI: 10.1016/b978-0-12-819728-8.00047-4

Muth, L., Noll, C., &; Sextro, W. (2022). Generation of a Reduced, Representative, Virtual Test Drive for Fast Evaluation of Tire Wear by Clustering of Driving Data. In A. Orlova &; D. Cole (Eds.), Advances in Dynamics of Vehicles on Roads and Tracks II - Proceedings of the 27th Symposium of the International Association of Vehicle System Dynamics, IAVSD 2021. Springer.https://doi.org/10.1007/978-3-031-07305-2_92 
LibreCat: /record/29934
DOI: 10.1007/978-3-031-07305-2_92

Martin, S., Schütte, J., Bäumler, C., Sextro, W., &; Tröster, T. (2021). Identification of joints for a load-adapted shape in a body in white using steady state vehicle simulations. Forces in Mechanics, 6, Article 100065.https://doi.org/10.1016/j.finmec.2021.100065 
LibreCat: /record/29293
DOI: 10.1016/j.finmec.2021.100065

Schütte, J., &; Sextro, W. (2021). Tire Wear Reduction Based on an Extended Multibody Rear Axle Model. Vehicles, 233–256.https://doi.org/10.3390/vehicles3020015 
LibreCat: /record/27508
DOI: 10.3390/vehicles3020015

Aimiyekagbon, O. K., Muth, L., Wohlleben, M. C., Bender, A., &; Sextro, W. (2021). Rule-based Diagnostics of a Production Line. In P. Do, S. King, &; O. Fink (Eds.), Proceedings of the European Conference of the PHM Society 2021 (Vol. 6, Issue 1, pp. 527–536).https://doi.org/10.36001/phme.2021.v6i1.3042 
LibreCat: /record/27111
DOI: 10.36001/phme.2021.v6i1.3042

Aimiyekagbon, O. K., Bender, A., &; Sextro, W. (n.d.). On the applicability of time series features as health indicators for technical systems operating under varying conditions. Proceedings of the Seventeenth International Conference on Condition Monitoring and Asset Management (CM 2021). Seventeenth International Conference on Condition Monitoring and Asset Management (CM 2021).
LibreCat: /record/22507

Bender, A., &; Sextro, W. (2021). Hybrid Prediction Method for Remaining Useful Lifetime Estimation Considering Uncertainties. In P. Do, S. King, &;https://doi.org/10.36001/phme.2021.v6i1.2843 __Olga Fink (Eds.), Proceedings of the European Conference of the PHM Society 2021 (Vol. 6, Issue 1).https://doi.org/10.36001/phme.2021.v6i1.2843  
LibreCat: /record/22724
DOI: https://doi.org/10.36001/phme.2021.v6i1.2843 

Schemmel, R., Krieger, V., Hemsel, T., &; Sextro, W. (2021). Co-simulation of MATLAB and ANSYS for ultrasonic wire bonding process optimization. Microelectronics Reliability, 119, 114077.https://doi.org/10.1016/j.microrel.2021.114077 
LibreCat: /record/21436
DOI: https://doi.org/10.1016/j.microrel.2021.114077

Bender, A. (2021). Zustandsüberwachung zur Prognose der Restlebensdauer von Gummi-Metall-Elementen unter Berücksichtigung systembasierter Unsicherheiten. Shaker.https://doi.org/10.17619/UNIPB/1-1084 
LibreCat: /record/21630
DOI: 10.17619/UNIPB/1-1084

Eichwald, P. (2021). Prozessgerechte Gestaltung von Werkzeugen auf Basis von Verschleißsimulationen am Beispiel des Ultraschallbondens (Vol. 11). Shaker.
LibreCat: /record/34274

Bender, A. (2021). A Multi-Model-Particle Filtering-Based Prognostic Approach to Consider Uncertainties in RUL Predictions. Machines, 9(10), Article 210.https://doi.org/10.3390/machines9100210 
LibreCat: /record/25046
DOI: 10.3390/machines9100210

Dreiling, D., Itner, D., Feldmann, N., Scheidemann, C., Gravenkamp, H., &; Henning, B. (2021). Application and modelling of ultrasonic transducers using 1-3 piezoelectric composites with structured electrodes. Fortschritte Der Akustik - DAGA 2021. DAGA 2021 - 47. JAHRESTAGUNG FÜR AKUSTIK, Wien.
LibreCat: /record/25265

Aimiyekagbon, O. K., Bender, A., &; Sextro, W. (2021). Extraktion und Selektion geeigneter Merkmale für die Restlebensdauerprognose von technischen Systemen trotz aleatorischen Unsicherheiten . VDI-Berichte 2391, 197–210.
LibreCat: /record/27652

Reinke, K., Bender, A., Meyer, T., Sextro, W., &; Kimotho, J. K. (2020). Patent EP 3 358 332 : Verfahren zur Bestimmung des Beginns einer verschleißbedingten Bauteil-Restnutzungsdauer eines elastisch verformbaren Bauteils, als Strukturteil und/oder Lagerteil eines Geräts.
LibreCat: /record/9981

Schütte, J., &; Sextro, W. (2020). Model-Based Investigation of the Influence of Wheel Suspension Characteristics on Tire Wear. In Lecture Notes in Mechanical Engineering.https://doi.org/10.1007/978-3-030-38077-9_201 
LibreCat: /record/22007
DOI: 10.1007/978-3-030-38077-9_201

Aimiyekagbon, O. K., Bender, A., &; Sextro, W. (2020). Evaluation of time series forecasting approaches for the reliable crack length prediction of riveted aluminium plates given insufficient data. PHM Society European Conference, 5(1).
LibreCat: /record/17810

Schemmel, R., Scheidemann, C., Hemsel, T., Kirsch, O., &; Sextro, W. (2020). Experimental analysis and modelling of bond formation in ultrasonic heavy wire bonding. CIPS 2020; 11th International Conference on Integrated Power Electronics Systems, 1–6.
LibreCat: /record/17355

Schemmel, R., Krieger, V., Hemsel, T., &; Sextro, W. (2020). Co-simulation of MATLAB and ANSYS for ultrasonic wire bonding process optimization. 2020 21st International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems (EuroSimE).https://doi.org/10.1109/eurosime48426.2020.9152679 
LibreCat: /record/17706
DOI: 10.1109/eurosime48426.2020.9152679

Magnus, K., Popp, K., &; Sextro, W. (2020). Schwingungen. Springer Vieweg Wiesbaden.https://doi.org/10.1007/978-3-658-31116-2 
LibreCat: /record/9857
DOI: 10.1007/978-3-658-31116-2

Kaul, T. (2020). Integrierte Modellierung von Zuverlässigkeit und dynamischem Verhalten mechatronischer Systeme (Vol. 10). Shaker.https://doi.org/10.17619/UNIPB/1-966 
LibreCat: /record/41964
DOI: 10.17619/UNIPB/1-966

Kaul, T., Bender, A., &; Sextro, W. (2019). Digital Twin for Reliability Analysis During Design and Operation of Mechatronic Systems. In M. Beer &; E. Zio (Eds.), Proceedings of the 29th European Safety and Reliability Conference (ESREL2019) (Issue 29, pp. 2340–2347).
LibreCat: /record/13461

Bender, A., Schinke, L., &; Sextro, W. (2019). Remaining useful lifetime prediction based on adaptive failure thresholds. In M. Beer &; E. Zio (Eds.), Proceedings of the 29th European Safety and Reliability Conference (ESREL2019) (Issue 29, pp. 1262–1269).
LibreCat: /record/13460

Schemmel, R., Eacock, F., Dymel, C., Hemsel, T., Hunstig, M., Brökelmann, M., &; Sextro, W. (2019). Impact of multi-dimensional vibration trajectories on quality and failure modes in ultrasonic bonding. International Symposium on Microelectronics, 509–514.https://doi.org/10.4071/2380-4505-2019.1.000509 
LibreCat: /record/15412
DOI: 10.4071/2380-4505-2019.1.000509

Schemmel, R., Hemsel, T., Dymel, C., Hunstig, M., Brökelmann, M., &; Sextro, W. (2019). Using complex multi-dimensional vibration trajectories in ultrasonic bonding and welding. Sensors and Actuators A: Physical, 295, 653–662.https://doi.org/10.1016/j.sna.2019.04.025 
LibreCat: /record/10334
DOI: 10.1016/j.sna.2019.04.025

Sprock, C. (2019). Zeiteffiziente messtechnische Analyse glatt-nichtlinearen Schwingverhaltens dynamischer Strukturen. Shaker.
LibreCat: /record/10003

Kohl, S. (2019). Analyse der Reibleistungsverteilung im Reifenlatsch unter Berücksichtigung der Fahrwerkdynamik eines Mehrlenkerachssystems zur Bewertung des Reifenverschleißes. Shaker.
LibreCat: /record/10001

Bornmann, P. (2019). Modellierung und experimentelle Charakterisierung der Wechselwirkung zwischen Ultraschallwandler und Flüssigkeit in kavitationsbasierten Prozessen. Shaker.
LibreCat: /record/10000

Schütte, J., Sextro, W., &; Kohl, S. (2019). Halbachsprüfstand zur kinematischen, elastokinematischen und dynamischen Charakterisierung von Radaufhängungen. In Fachtagung Mechatronik 2019. Paderborn: Universitätsbibliothek Paderborn, 2019.https://doi.org/10.17619/UNIPB/1-777 
LibreCat: /record/15475
DOI: 10.17619/UNIPB/1-777

Hagedorn, O. E. C., Pielsticker, D., Hemsel, T., &; Sextro, W. (2019). Messung hochfrequenter In-Plane-Schwingungen mittels Laservibrometrie in räumlich eingeschränkten Umgebungen. In 2. VDI-Fachtagung Schwingungen 2019. VDI Verlag GmbH · Düsseldorf 2019.
LibreCat: /record/15244

Dunst, P., Bornmann, P., Hemsel, T., Littmann, W., &; Sextro, W. (2019). Atomization of Fluids with Ultrasound. In J. Lötters &; G. Urban (Eds.), Conference Proceedings - The 4th Conference on MicroFluidic Handling Systems (MF) (pp. 140–143). Enschede, The Netherlands.
LibreCat: /record/14852