Dymel, C. (2024). Modellbasierte Entwicklung von Ultraschallwandlern unter der Berücksichtigung von Nichtlinearitäten (Vol. 16). Shaker Verlag.

Aimiyekagbon, O. K., Bender, A., Hemsel, T., &; Sextro, W. (2024). Diagnostics of Piezoelectric Bending Actuators Subjected to Varying Operating Conditions. Electronics, 13(3), Article 521.https://doi.org/10.3390/electronics13030521 

Schütte, J., &; Sextro, W. (2023). Einfluss der Radhubkinematik auf den Reifenverschleiß. 20. VDI-Fachtagung Reifen - Fahrwerk - Fahrbahn, 2425, 165–180.

Scheidemann, C., Hemsel, T., Friesen, O., Claes, L., &; Sextro, W. (2023). Influence of Temperature and Pre-Stress on the Piezoelectric Material Behavior of Ring-Shaped Ceramics. International Conference on Functional Materials &; Devices 2023 (ICFMD 2023), Incheon, Korea.

Scheidemann, C., Hemsel, T., Friesen, O., Claes, L., &; Sextro, W. (2023). Influence of Temperature and Pre-Stress on the Piezoelectric Material Behavior of Ring-Shaped Ceramics. 7th International Conference on Advanced Electromaterials (ICAE 2023), Jeju, Korea.

Scheidemann, C., Hagedorn, O. E. C., Hemsel, T., &; Sextro, W. (2023). Experimental Investigation of Bond Formation and Wire Deformation in the Ultrasonic Wire Bonding Process. International Conference on Functional Materials &; Devices 2023 (ICFMD 2023), Jeju, Korea.

Sehlmeyer, B., Kampmann, R., Scheidemann, C., Hemsel, T., &; Getzlaff, M. (2023). Burst Mode of Ultrasonic Resonant Oscillations for Stimulation and Destruction of Tumor Cells. In Deutsche Physikalische Gesellschaft e. V. (Ed.), Frühjahrstagung 2023, Sektion Kondensierte Materie (SKM).

Kampmann, R., Sehlmeyer, B., Scheidemann, C., Hemsel, T., &; Getzlaff, M. (2023). Burst Mode Characteristics of an Ultrasonic Transducer for Treatment of Cancer Cells. In Deutsche Physikalische Gesellschaft e. V. (Ed.), Frühjahrstagung 2023, Sektion Kondensierte Marterie (SKM).

Aimiyekagbon, O. K., Löwen, A., Bender, A., Muth, L., &; Sextro, W. (2023). Expert-Informed Hierarchical Diagnostics of Multiple Fault Modes of a Spacecraft Propulsion System. Proceedings of the Asia Pacific Conference of the PHM Society 2023 , 4(1).https://doi.org/10.36001/phmap.2023.v4i1.3596 

Wohlleben, M. C., Muth, L., Peitz, S., &; Sextro, W. (2023). Transferability of a discrepancy model for the dynamics of electromagnetic oscillating circuits. Proceedings in Applied Mathematics and Mechanics.https://doi.org/10.1002/pamm.202300039 

Bender, A. (2023). Model-based condition monitoring of piezoelectric bending actuators. Sensors and Actuators A: Physical, 357, Article 114399.https://doi.org/10.1016/j.sna.2023.114399 

Dunst, P. (2023). Modellierung und Optimierung reibungsbasierter Ultraschall-Pulvertransportprozesse (Vol. 14). Shaker.

Althoff, S. (2023). Predicting the Bond Quality of Heavy Copper Wire Bonds using a Friction Model Approach (Vol. 15). Shaker.

Scheidemann, C., Hemsel, T., &; Sextro, W. (2022). Modellbasierte Ermittlung optimaler Prozessparameter für neuartige Ultraschallbondverbindungen. LibreCat University.https://doi.org/10.2314/KXP:1879655276 

Reinke, K., Bender, A., Meyer, T., Sextro, W., &; Kimotho, J. K. (2022). Patent DE 10 2017 000 926 : Gerät mit wenigstens einem elastisch verformbaren Bauteil, insbesondere einem Gummi-Metall-Lager und mit einer Einrichtung zur Feststellung des Beginns einer verschleißbedingten Bauteil-Restnutzungsdauer, sowie Verfahren zur Bestimmung der Bauteil-Restnutzungsdauer.

Scheidemann, C., Kirsch, O., Hemsel, T., &; Sextro, W. (2022). Experimental Investigation of Multidimensional Ultrasonic Heavy Wire Bonding. 2022 IEEE 9th Electronics System-Integration Technology Conference (ESTC).https://doi.org/10.1109/estc55720.2022.9939478 

Aimiyekagbon, O. K., Bender, A., &; Sextro, W. (2022). On the applicability of time series features as health indicators for technical systems operating under varying conditions.  Condition Monitor, 425, 5–10.

Hagedorn, O. E. C., Broll, M., Kirsch, O., Hemsel, T., &; Sextro, W. (2022). Experimental Investigation of the Influence of different Bond Tool Grooves on the Bond Quality for Ultrasonic Thick Wire Bonding. CIPS 2022 - 12th International Conference on Integrated Power Electronics Systems, 138–143.

Wohlleben, M. C., Bender, A., Peitz, S., &; Sextro, W. (2022). Development of a Hybrid Modeling Methodology for Oscillating Systems with Friction. In Machine Learning, Optimization, and Data Science. Springer International Publishing.https://doi.org/10.1007/978-3-030-95470-3_8 

Schemmel, R. (2022). Enhanced process development by simulation of ultrasonic heavy wire bonding (Vol. 13). Shaker.https://doi.org/10.17619/UNIPB/1-1280 

Hemsel, T., &; Twiefel, J. (2022). Piezoelectric Ultrasonic Power Transducers. In Reference Module in Materials Science and Materials Engineering. Elsevier.https://doi.org/10.1016/b978-0-12-819728-8.00047-4 

Muth, L., Noll, C., &; Sextro, W. (2022). Generation of a Reduced, Representative, Virtual Test Drive for Fast Evaluation of Tire Wear by Clustering of Driving Data. In A. Orlova &; D. Cole (Eds.), Advances in Dynamics of Vehicles on Roads and Tracks II - Proceedings of the 27th Symposium of the International Association of Vehicle System Dynamics, IAVSD 2021. Springer.https://doi.org/10.1007/978-3-031-07305-2_92 

Schütte, J., &; Sextro, W. (2021). Tire Wear Reduction Based on an Extended Multibody Rear Axle Model. Vehicles, 233–256.https://doi.org/10.3390/vehicles3020015 

Martin, S., Schütte, J., Bäumler, C., Sextro, W., &; Tröster, T. (2021). Identification of joints for a load-adapted shape in a body in white using steady state vehicle simulations. Forces in Mechanics, 6, Article 100065.https://doi.org/10.1016/j.finmec.2021.100065 

Aimiyekagbon, O. K., Muth, L., Wohlleben, M. C., Bender, A., &; Sextro, W. (2021). Rule-based Diagnostics of a Production Line. In P. Do, S. King, &; O. Fink (Eds.), Proceedings of the European Conference of the PHM Society 2021 (Vol. 6, Issue 1, pp. 527–536).https://doi.org/10.36001/phme.2021.v6i1.3042 

Aimiyekagbon, O. K., Bender, A., &; Sextro, W. (n.d.). On the applicability of time series features as health indicators for technical systems operating under varying conditions. Proceedings of the Seventeenth International Conference on Condition Monitoring and Asset Management (CM 2021). Seventeenth International Conference on Condition Monitoring and Asset Management (CM 2021).

Bender, A., &; Sextro, W. (2021). Hybrid Prediction Method for Remaining Useful Lifetime Estimation Considering Uncertainties. In P. Do, S. King, &;https://doi.org/10.36001/phme.2021.v6i1.2843 __Olga Fink (Eds.), Proceedings of the European Conference of the PHM Society 2021 (Vol. 6, Issue 1).https://doi.org/10.36001/phme.2021.v6i1.2843  

Schemmel, R., Krieger, V., Hemsel, T., &; Sextro, W. (2021). Co-simulation of MATLAB and ANSYS for ultrasonic wire bonding process optimization. Microelectronics Reliability, 119, 114077.https://doi.org/10.1016/j.microrel.2021.114077 

Bender, A. (2021). Zustandsüberwachung zur Prognose der Restlebensdauer von Gummi-Metall-Elementen unter Berücksichtigung systembasierter Unsicherheiten. Shaker.https://doi.org/10.17619/UNIPB/1-1084 

Eichwald, P. (2021). Prozessgerechte Gestaltung von Werkzeugen auf Basis von Verschleißsimulationen am Beispiel des Ultraschallbondens (Vol. 11). Shaker.

Bender, A. (2021). A Multi-Model-Particle Filtering-Based Prognostic Approach to Consider Uncertainties in RUL Predictions. Machines, 9(10), Article 210.https://doi.org/10.3390/machines9100210 

Dreiling, D., Itner, D., Feldmann, N., Scheidemann, C., Gravenkamp, H., &; Henning, B. (2021). Application and modelling of ultrasonic transducers using 1-3 piezoelectric composites with structured electrodes. Fortschritte Der Akustik - DAGA 2021. DAGA 2021 - 47. JAHRESTAGUNG FÜR AKUSTIK, Wien.

Aimiyekagbon, O. K., Bender, A., &; Sextro, W. (2021). Extraktion und Selektion geeigneter Merkmale für die Restlebensdauerprognose von technischen Systemen trotz aleatorischen Unsicherheiten . VDI-Berichte 2391, 197–210.

Schütte, J., &; Sextro, W. (2020). Model-Based Investigation of the Influence of Wheel Suspension Characteristics on Tire Wear. Lecture Notes in Mechanical Engineering.https://doi.org/10.1007/978-3-030-38077-9_201 

Reinke, K., Bender, A., Meyer, T., Sextro, W., &; Kimotho, J. K. (2020). Patent EP 3 358 332 : Verfahren zur Bestimmung des Beginns einer verschleißbedingten Bauteil-Restnutzungsdauer eines elastisch verformbaren Bauteils, als Strukturteil und/oder Lagerteil eines Geräts.

Aimiyekagbon, O. K., Bender, A., &; Sextro, W. (2020). Evaluation of time series forecasting approaches for the reliable crack length prediction of riveted aluminium plates given insufficient data. PHM Society European Conference, 5(1).

Schemmel, R., Scheidemann, C., Hemsel, T., Kirsch, O., &; Sextro, W. (2020). Experimental analysis and modelling of bond formation in ultrasonic heavy wire bonding. CIPS 2020; 11th International Conference on Integrated Power Electronics Systems, 1–6.

Schemmel, R., Krieger, V., Hemsel, T., &; Sextro, W. (2020). Co-simulation of MATLAB and ANSYS for ultrasonic wire bonding process optimization. 2020 21st International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems (EuroSimE).https://doi.org/10.1109/eurosime48426.2020.9152679 

Magnus, K., Popp, K., &; Sextro, W. (2020). Schwingungen. Springer Vieweg Wiesbaden.https://doi.org/10.1007/978-3-658-31116-2 

Kaul, T. (2020). Integrierte Modellierung von Zuverlässigkeit und dynamischem Verhalten mechatronischer Systeme (Vol. 10). Shaker.https://doi.org/10.17619/UNIPB/1-966 

Schütte, J., Sextro, W., &; Kohl, S. (2019). Halbachsprüfstand zur kinematischen, elastokinematischen und dynamischen Charakterisierung von Radaufhängungen. Fachtagung Mechatronik 2019. Fachtagung Mechatronik 2019, Paderborn.https://doi.org/10.17619/UNIPB/1-777 

Kaul, T., Bender, A., &; Sextro, W. (2019). Digital Twin for Reliability Analysis During Design and Operation of Mechatronic Systems. In M. Beer &; E. Zio (Eds.), Proceedings of the 29th European Safety and Reliability Conference (ESREL2019) (Issue 29, pp. 2340–2347).

Bender, A., Schinke, L., &; Sextro, W. (2019). Remaining useful lifetime prediction based on adaptive failure thresholds. In M. Beer &; E. Zio (Eds.), Proceedings of the 29th European Safety and Reliability Conference (ESREL2019) (Issue 29, pp. 1262–1269).

Schemmel, R., Eacock, F., Dymel, C., Hemsel, T., Hunstig, M., Brökelmann, M., &; Sextro, W. (2019). Impact of multi-dimensional vibration trajectories on quality and failure modes in ultrasonic bonding. International Symposium on Microelectronics, 509–514.https://doi.org/10.4071/2380-4505-2019.1.000509 

Schemmel, R., Hemsel, T., Dymel, C., Hunstig, M., Brökelmann, M., &; Sextro, W. (2019). Using complex multi-dimensional vibration trajectories in ultrasonic bonding and welding. Sensors and Actuators A: Physical, 295, 653–662.https://doi.org/10.1016/j.sna.2019.04.025 

Sprock, C. (2019). Zeiteffiziente messtechnische Analyse glatt-nichtlinearen Schwingverhaltens dynamischer Strukturen. Shaker.

Kohl, S. (2019). Analyse der Reibleistungsverteilung im Reifenlatsch unter Berücksichtigung der Fahrwerkdynamik eines Mehrlenkerachssystems zur Bewertung des Reifenverschleißes. Shaker.

Bornmann, P. (2019). Modellierung und experimentelle Charakterisierung der Wechselwirkung zwischen Ultraschallwandler und Flüssigkeit in kavitationsbasierten Prozessen. Shaker.

Hagedorn, O. E. C., Pielsticker, D., Hemsel, T., &; Sextro, W. (2019). Messung hochfrequenter In-Plane-Schwingungen mittels Laservibrometrie in räumlich eingeschränkten Umgebungen. In 2. VDI-Fachtagung Schwingungen 2019. VDI Verlag GmbH · Düsseldorf 2019.

Dunst, P., Bornmann, P., Hemsel, T., Littmann, W., &; Sextro, W. (2019). Atomization of Fluids with Ultrasound. In J. Lötters &; G. Urban (Eds.), Conference Proceedings - The 4th Conference on MicroFluidic Handling Systems (MF) (pp. 140–143). Enschede, The Netherlands.

Bender, A., Reinke, K., &; Sextro, W. (2019). Konstruktion und Zustandsüberwachung eines Gummi-Metall-Teils mit integriertem Thermoelement. In 10. VDI-Fachtagung Schwingungen von Windenergieanlagen 2019 (Vol. VDI-Berichte 2346, pp. 241–248). Bremen 2019.

Kaul, T., Hentze, J., Sextro, W., &; Gräßler, I. (2019). Integration von Verlässlichkeitsmodellen der Entwicklung in einen Digitalen Zwilling zur Umsetzung einer vorausschauenden Instandhaltung. In Fachtagung Mechatronik 2019 Paderborn.

Dunst, P., Hemsel, T., Bornmann, P., Littmann, W., &; Sextro, W. (2019). Modellbasierte und experimentelle Charakterisierung von intensiven Ultraschall-Stehwellenfeldern für die Zerstäubung hochviskoser Flüssigkeiten. In DAGA 2019. Rostock.

Sextro, W., &; Brökelmann, M. (2019). Intelligente Herstellung zuverlässiger Kupferbondverbindungen (Vol. VIII). Springer Verlag.https://doi.org/10.1007/978-3-662-55146-2 

Meyer, T. (2018). Optimization-based reliability control of mechatronic systems. Shaker.

Dymel, C., Eichwald, P., Schemmel, R., Hemsel, T., Brökelmann, M., Hunstig, M., &; Sextro, W. (2018). Numerical and statistical investigation of weld formation in a novel two-dimensional copper-copper bonding process. In (Proceedings of 7th Electronics System-Integration Technology Conference, Dresden, Germany) (pp. 1–6).

Dymel, C., Schemmel, R., Hemsel, T., Sextro, W., Brökelmann, M., &; Hunstig, M. (2018). Experimental investigations on the impact of bond process parameters in two-dimensional ultrasonic copper bonding. In (Proceedings of 8th Electronics IEEE CPMT Symposium Japan (ICSJ 2018), Kyoto, Japan) (pp. 41–44).

Schemmel, R., Althoff, S., Sextro, W., Unger, A., Brökelmann, M., &; Hunstig, M. (2018). Effects of different working frequencies on the joint formation in copper wire bonding. In CIPS 2018 - 10th International Conference on Integrated Power Electronics Systems (CIPS 2018) (pp. 230–235). Stuttgart, Germany.

Unger, A., Hunstig, M., Meyer, T., Brökelmann, M., &; Sextro, W. (2018). Intelligent Production of Wire Bonds using Multi-Objective Optimization – Insights, Opportunities and Challenges. In In Proceedings of IMAPS 2018 – 51st Symposium on Microelectronics, Pasadena, CA, 2018 (Vol. Vol. 2018, No. 1, pp. 000572-000577.).https://doi.org/10.4071/2380-4505-2018.1.000572 

Bender, A., &; Sextro, W. (2018). A particle filtering approach for temperature based prognostics. In Safety and Reliability – Safe Societies in a Changing World (pp. 1025–1033). Trondheim, Norway.

Schemmel, R., Hemsel, T., &; Sextro, W. (2018). Numerical and experimental investigations in ultrasonic heavy wire bonding. In 6th European Conference on Computational Mechanics (ECCM 6) (pp. 1–12). Glasgow, UK.

Dunst, P., Bornmann, P., Hemsel, T., Littmann, W., &; Sextro, W. (2018). Vibration Assisted Dosing, Mixing and Transport of Dry Fine Powders. ACTUATOR 2018; 16th International Conference on New Actuators, 142–145.

Dunst, P., Bornmann, P., Hemsel, T., &; Sextro, W. (2018). Vibration-Assisted Handling of Dry Fine Powders. Actuators 2018, 7(2)., 1–11.https://doi.org/10.3390/act7020018 

Meyer, T., Kaul, T., Kimotho, J. K., &; Sextro, W. (2018). Steigerung der Intelligenz mechatronischer Systeme (Vol. Steigerung der Verlässlichkeit technischer Systeme, pp. 193–213). Springer Nature Switzerland AG. Part of Springer Nature.

Neuhaus, J. (2017). Multiskalen-Kontaktmodellierung unter Berücksichtigung der Rauigkeit und fluiden Zwischenschichten am Beispiel des Rad-Schiene-Kontakts. Shaker.

Unger, A. (2017). Modellbasierte Mehrzieloptimierung zur Herstellung von Ultraschall-Drahtbondverbindungen in Leistungshalbleitermodulen. Universität Paderborn.

Eichwald, P., Althoff, S., Schemmel, R., Sextro, W., Unger, A., Brökelmann, M., &; Hunstig, M. (2017). Multi-dimensional Ultrasonic Copper Bonding – New Challenges for Tool Design. IMAPSource, Vol. 2017, No. 1.

Sextro, W., Meyer, T., Kaul, T., &; Kimotho, J. K. (2017). Entwicklung verlässlicher, intelligenter Systeme. In VDI-Berichte 2307–28. Tagung Technische Zuverlässigkeit (TTZ 2017) - Entwicklung und Betrieb zuverlässiger Produkte. (pp. 17–30). Leonberg.

Hentze, J., Kaul, T., Grässler, I., &; Sextro, W. (2017). Integrated modeling og behavior and reliability in system development. In ICE, 21st International conference on enginieering design (pp. 385–394).

Bender, A., Kaul, T., &; Sextro, W. (2017). Entwicklung eines Condition Monitoring Systems für Gummi-Metall-Elemente. In Verlagsschriftenreihe des Heinz Nixdorf Instituts Band 369, Paderborn, 2017 (pp. 347–358). Wissenschaftsforum Intelligente Technische Systeme (WInTeSys) 2017.

Kimotho, J. K., Sextro, W., &; Hemsel, T. (2017). Estimation of Remaining Useful Lifetime of Piezoelectric Transducers Based on Self-Sensing. In IEEE Transactions on Reliability (pp. 1–10).https://doi.org/10.1109/TR.2017.2710260 

Dunst, P., Hemsel, T., &; Sextro, W. (2017). Analysis of pipe vibration in an ultrasonic powder transportationsystem. Elsevier, Sensors and Actuators A 263, 733–736.

Kaul, T., Meyer, T., &; Sextro, W. (2017). Formulation of reliability-related objective functions for design of intelligent mechatronic systems. SAGE Journals, Vol. 231(4), 390–399.https://doi.org/10.1177/1748006X17709376 

Hunstig, M. (2017). Piezoelectric Inertia Motors—A Critical Review of History, Concepts, Design, Applications, and Perspectives. Actuators. 2017, 6(1)-7., 1–35.https://doi.org/10.3390/act6010007 

Schulze, S., Sextro, W., &; Kister, K. (2017). Model based optimization of dynamics in adaptive headlamps. In Proceedings of the 12th International Symposium on Automotive Lighting 2017.

Schemmel, R., Hemsel, T., &; Sextro, W. (2017). MoRFUS: Mobile Reinigungseinheit für Förderketten basierend auf Ultraschall. In 43. Deutsche Jahrestagung für Akustik (pp. 611–614). Kiel 2017.

Bender, A., Sextro, W., &; Reinke, K. (2017). Neuartiges Konzept zur Lebensdauerprognose von Gummi-Metall-Elementen. In VDI-Berichte 2301 (pp. 49–60).

Bender, A., Kimotho, J. K., Kohl, S., Sextro, W., &; Reinke, K. (2017). Modellbasierte Prognose der nutzbaren Restlebensdauer von Gummi-Metall-Elementen. In 15. Internationale Schienenfahrzeugtagung (pp. 123–125).

Kimotho, J. K. (2016). Development and Performance Evaluation of Prognostic Approaches for Technical Systems. Shaker.

Eichwald, P., Unger, A., Eacock, F., Althoff, S., Sextro, W., Guth, K., &; Brökelmann, M. (2016). Micro Wear Modeling in Copper Wire Wedge Bonding. In IEEE CPMT Symposium Japan, 2016.

Meyer , T., Unger, A., Althoff, S., Sextro, W., Brökelmann, M., Hunstig, M., &; Guth, K. (2016). Reliable Manufacturing of Heavy Copper Wire Bonds Using Online Parameter Adaptation. In IEEE 66th Electronic Components and Technology Conference (pp. 622–628).https://doi.org/10.1109/ECTC.2016.215 

Unger, A., Schemmel, R., Meyer, T., Eacock, F., Eichwald, P., Althoff, S.,  Guth, K. (2016). Validated Simulation of the Ultrasonic Wire Bonding Process. In Wear Modeling in Copper Wire Wedge Bonding. IEEE CPMT Symposium Japan, 2016 (pp. 251–254). IEEE CPMT Symposium Japan.

Althoff, S., Meyer, T., Unger, A., Sextro, W., &; Eacock, F. (2016). Shape-Dependent Transmittable Tangential Force of Wire Bond Tools. In IEEE 66th Electronic Components and Technology Conference (pp. 2103–2110).https://doi.org/10.1109/ECTC.2016.234 

Brökelmann, M., Unger, A., Meyer, T., Althoff, S., Sextro, W., Hunstig, M.,  Guth, K. (2016). Kupferbondverbindungen intelligent herstellen. Wt-Online, 7/8, 512–519.

Kaul, T., Meyer, T., &; Sextro, W. (2016). Modeling of Complex Redundancy in Technical Systems with Bayesian Networks. In Proceedings of the Third European Conference of the Prognostics and Health Management Society 2016.

Eacock, F., Unger, A., Eichwald, P., Grydin, O., Hengsbach, F., Althoff, S.,https://doi.org/10.1109/ECTC.2016.91__Guth, K. (2016). Effect of different oxide layers on the ultrasonic copper wire bond process. In IEEE 66th Electronic Components and Technology Conference (pp. 2111–2118).https://doi.org/10.1109/ECTC.2016.91 

Lessmeier, C., Kimotho, J. K., Zimmer, D., &; Sextro, W. (2016). Condition Monitoring of Bearing Damage in Electromechanical Drive Systems by Using Motor Current Signals of Electric Motors: A Benchmark Data Set for Data-Driven Classification. In European Conference of the Prognostics and Health Management Society.

Schulze, S., Sextro, W., &; Kohl, S. (2016). Using Adequate Reduced Models for Flexible Multibody Systems of Automotive Mechatronic Systems. In 2nd International Conference on Automotive Innovation and Green Energy Vehicle (AiGEV) Malaysia 2016 (pp. 1–11).

Kohl, S., Sextro, W., &; Schulze, S. (2016). Aspects of Flexible Viscoelastic Suspension Modeling for Frictional Rolling Contact Analysis using ADAMS. In The 2nd International Conference on Automotive Innovation and Green Energy Vehicle (AiGEV 2016), Cyberjaya, Malaysia, 2016. (pp. 1–12). Cyberjaya, Malaysia, 2016.

Dunst, P., Sextro, W., Bornmann, P., Hemsel, T., &; Littmann, W. (2016). Transportation of dry fine powders by coordinated friction manipulation. In PAMM Proc. Appl. Math. Mech. 16 (pp. 635–636). Braunschweig.https://doi.org/10.1002/pamm.201610306 

Sondermann-Woelke, C. (2015). Entwurf und Anwendung einer erweiterten Zustandsüberwachung zur Verlässlichkeitssteigerung selbstoptimierender Systeme. Shaker.

Meyer, T., Unger, A., Althoff, S., Sextro, W., Brökelmann, M., Hunstig, M., &; Guth, K. (2015). Modeling and simulation of the ultrasonic wire bonding process. In 2015 17th Electronics Packaging Technology Conference.https://doi.org/10.1109/EPTC.2015.7412377 

Unger, A., Sextro, W., Meyer, T., Eichwald, P., Althoff, S., Eacock, F., &; Brökelmann, M. (2015). Modeling of the Stick-Slip Effect in Heavy Copper Wire Bonding to Determine and Reduce Tool Wear. In 2015 17th Electronics Packaging Technology Conference.https://doi.org/10.1109/EPTC.2015.7412375 

Althoff, S., Unger, A., Sextro, W., &; Eacock, F. (2015). Improving the cleaning process in copper wire bonding by adapting bonding parameters. In 2015 17th Electronics Packaging Technology Conference (pp. 1–6).https://doi.org/10.1109/EPTC.2015.7412402 

Meyer, T., Kimotho, J. K., &; Sextro, W. (2015). Anforderungen an Condition-Monitoring-Verfahren zur Nutzung im zuverläsigkeitsgeregelten Betrieb adaptiver Systeme. In 27. Tagung Technische Zuverlässigkeit (TTZ 2015) - Entwicklung und Betrieb zuverlässiger Produkte (pp. 111–122). Leonberg.

Kaul, T., Meyer, T., &; Sextro, W. (2015). Integrated Model for Dynamics and Reliability of Intelligent Mechatronic Systems. In P. et al. (Ed.), European Safety and Reliability Conference (ESREL2015). London: Taylor and Francis.https://doi.org/10.1201/b19094-290 

Kaul, T., Meyer, T., &; Sextro, W. (2015). Integrierte Modellierung der Dynamik und der Verlässlichkeit komplexer mechatronischer Systeme. In J. Gausemeier, R. Dumitrescu, F. Rammig, W. Schäfer, &; A. Trächtler (Eds.), 10. Paderborner Workshop Entwurf mechatronischer Systeme (pp. 101–112). Paderborn: Heinz Nixdorf Institut, Universität Paderborn.

Kudo, R., Bornmann, P., Hemsel, T., &; Morita, T. (2015). Thick KNbO 3 films deposited by ultrasonic-assisted hydrothermal method. Acoustical Science and Technology, 36(3), 262–264.https://doi.org/10.1250/ast.36.262 

Schulte, F., Neuhaus, J., &; Sextro, W. (2015). A Mechanical Model for the Dynamical Contact of Elastic Rough Bodies with Viscoelastic Properties. In Proceedings of ICoEV 2015 International Conference on Engineering Vibration (pp. 1109–1117).

Bornmann, P., Hemsel, T., Sextro, W., Memoli, G., Hodnett, M., &; Zeqiri, B. (2015). Kavitationsdetektion mittels Self-Sensing-Ultraschallwandler. Tm - Technisches Messen, 82(2), 73–84.https://doi.org/10.1515/teme-2015-0017