@bookReschetnik_Brüggemann_Kullmer_Risse, title=Beeinflussung des Risswachstums durch Kerben in additiv gefertigten Strukturen, journal=Additive Fertigung von Bauteilen und Strukturen – Neue Erkenntnisse und Praxisbeispiele, author=Reschetnik, W. and Brüggemann, J.P. and Kullmer, G. and Risse, L. 
LibreCat: /record/22111

@bookRiemer_Leuders_Richard_Kullmer, title=Optimierung der Werkstoffperformance lasergeschmolzener metallischer Werkstoffe, author=Riemer, A. and Leuders, S. and Richard, H.A. and Kullmer, G. 
LibreCat: /record/22114

@inproceedingsBagsik_Schöppner_Klemp_2010, title=FDM Part Quality Manufactured with ULTEM 9085, DOI=https://docplayer.net/255735-Fdm-part-quality-manufactured-with-ultem-9085.html, booktitle=Proceedings of International Conference Polymeric Materials, author=Bagsik, A. and Schöppner, Volker and Klemp, E., year=2010 
LibreCat: /record/22050
DOI: https://docplayer.net/255735-Fdm-part-quality-manufactured-with-ultem-9085.html

@articleAdam_Zimmer_2010, title=Konstruktionsregeln für additive Fertigung in Lehre und Forschung, volume=15, DOI=https://www.researchgate.net/publication/274193188_Konstruktionsregeln_fur_additive_Fertigung_in_Lehre_und_Forschung , journal=Newsletter Berliner Kreis, author=Adam, Guido and Zimmer, Detmar, year=2010, pages=22–23 
LibreCat: /record/22355
DOI: https://www.researchgate.net/publication/274193188_Konstruktionsregeln_fur_additive_Fertigung_in_Lehre_und_Forschung 

@bookRüsenberg_Schmidt_Hosse_Schmid_2011, title=Porosity as a key to increase material properties of laser sintered parts, DOI=10.1201/b11341, author=Rüsenberg, Stefan and Schmidt, L. and Hosse, H. and Schmid, Hans-Joachim, year=2011, pages=531–538 
LibreCat: /record/22191
DOI: 10.1201/b11341

@bookAdam_Zimmer_2011, title=Direct Manufacturing Design Rules, DOI=10.1201/b11341-88, publisher=CRC Press, author=Adam, Guido and Zimmer, Detmar, year=2011, pages=545–551 
LibreCat: /record/22358
DOI: 10.1201/b11341-88

@inproceedingsRüsenberg_Schmidt_Schmid_2011, title=Mechanical and Physical Properties - A Way to asses quality of Laser Sintered Parts, volume=22, DOI=http://utw10945.utweb.utexas.edu/Manuscripts/2011/2011-19-Ruesenberg.pdf, booktitle=22th Annual International Solid Freeform Fabrication Symposium, author=Rüsenberg, Stefan and Schmidt, L. and Schmid, Hans-Joachim, year=2011, pages=239–251 
LibreCat: /record/22188
DOI: http://utw10945.utweb.utexas.edu/Manuscripts/2011/2011-19-Ruesenberg.pdf

@inproceedingsZimmer_Adam_2011, title=DMDR Direct Manufacturing Design Rules. Erarbeiten von applikationsunabhängigen Konstruktionsregeln, booktitle=Rapid.Tech 2011 Fachmesse und Anwendertagung für Rapid-Technologie, author=Zimmer, Detmar and Adam, Guido, year=2011 
LibreCat: /record/22360

@inproceedingsBagsik_Schöppner_2011, title=Mechanical Properties of Fused Deposition Modeling Parts Manufactured with ULTEM*9085, DOI=https://www.researchgate.net/profile/Volker_Schoeppner/publication/284341800_Mechanical_properties_of_fused_deposition_modeling_parts_manufactured_with_ULTEMzast9085/links/5c73971b458515831f6cd501/Mechanical-properties-of-fused-deposition-modeling-parts-manufactured-with-ULTEM-zast9085.pdf, booktitle=ANTEC, author=Bagsik, A. and Schöppner, Volker, year=2011, pages=1294–1298 
LibreCat: /record/22029
DOI: https://www.researchgate.net/profile/Volker_Schoeppner/publication/284341800_Mechanical_properties_of_fused_deposition_modeling_parts_manufactured_with_ULTEMzast9085/links/5c73971b458515831f6cd501/Mechanical-properties-of-fused-deposition-modeling-parts-manufactured-with-ULTEM-zast9085.pdf

@inproceedingsRüsenberg_Weiffen_Knoop_Schmid_2012, title=Controlling the Quality of Laser Sintered Parts Along the Process Chain, volume=23, DOI=http://utw10945.utweb.utexas.edu/Manuscripts/2012/2012-78-Ruesenberg.pdf, booktitle=23rd Annual International Solid Freeform Fabrication Symposium, author=Rüsenberg, Stefan and Weiffen, R. and Knoop, F. and Schmid, Hans-Joachim, year=2012, pages=1024–1044 
LibreCat: /record/22174
DOI: http://utw10945.utweb.utexas.edu/Manuscripts/2012/2012-78-Ruesenberg.pdf

@inproceedingsRüsenberg_Schmid_2012, title=Mechanical Properties as a Result of multitude of Parameters, volume=17, DOI=https://afpr.asso.fr/content/assises/2012/actes/papiers/s5_2.pdf, booktitle=The European Forum on Additive Manufacturing, author=Rüsenberg, Stefan and Schmid, Hans-Joachim, year=2012 
LibreCat: /record/22204
DOI: https://afpr.asso.fr/content/assises/2012/actes/papiers/s5_2.pdf

@inproceedingsAdam_Zimmer_2012, title=Elementbasierte Erarbeitung von Konstruktionsregeln für additive Fertigung, author=Adam, Guido and Zimmer, Detmar, year=2012 
LibreCat: /record/22364

@inproceedingsLindemann_Jahnke_Moi_Koch_2012, title=Analyzing Product Lifecycle Costs for a Better Understanding of Cost Drivers in Additve Manufacturing, volume=23, DOI=http://utw10945.utweb.utexas.edu/Manuscripts/2012/2012-12-Lindemann.pdf, booktitle=23rd Annual International Solid Freeform Fabrication Symposium, author=Lindemann, C. and Jahnke, U. and Moi, M. and Koch, R., year=2012, pages=177–188 
LibreCat: /record/21680
DOI: http://utw10945.utweb.utexas.edu/Manuscripts/2012/2012-12-Lindemann.pdf

@inproceedingsBagsik_Schöppner_Klemp_2012, title=Long-Term ageing effects on Fused Deposition Modeling Parts manufactured with ULTEM*9085, volume=23, DOI=http://utw10945.utweb.utexas.edu/Manuscripts/2012/2012-48-Bagsik.pdf, booktitle=23rd Annual International Solid Freeform Fabrication Symposium, author=Bagsik, A. and Schöppner, Volker and Klemp, E., year=2012, pages=629–640 
LibreCat: /record/22016
DOI: http://utw10945.utweb.utexas.edu/Manuscripts/2012/2012-48-Bagsik.pdf

@inproceedingsBagsik_Schöppner_Klemp_2012, title=Tensile and Flexural Properties of Fused Deposition Modeling Parts Manufactured with ULTEM*9085, volume=1, booktitle=1st International Conference on Thermo-Mechanically Graded Materials, author=Bagsik, A. and Schöppner, Volker and Klemp, E., year=2012, pages=129–134 
LibreCat: /record/22164

@inproceedingsBagsik_Schöppner_Klemp_2012, place=Ghent, title=Extensive Analysis of the mechanical strength properties of Fused Deposition Modeling Parts manufactured with ULTEM 9085, volume=5, DOI=https://www.tib.eu/de/suchen/id/TIBKAT%3A756276616, booktitle=5th International Conference on Polymer and Mould Innovations, publisher=Centre for Polymer and Material Technology, Univ. College, Ghent Univ., author=Bagsik, A. and Schöppner, Volker and Klemp, E., year=2012, pages=266–272 
LibreCat: /record/22024
DOI: https://www.tib.eu/de/suchen/id/TIBKAT%3A756276616

@inproceedingsJosupeit_Rüsenberg_Schmid_2013, title=A material-based quality concept for polymer laser sintering, volume=24, DOI=http://utw10945.utweb.utexas.edu/Manuscripts/2013/2013-03-Josupeit.pdf, booktitle=24th Annual International Solid Freeform Fabrication Symposium , author=Josupeit, Stefan and Rüsenberg, Stefan and Schmid, Hans-Joachim, year=2013, pages=44–54 
LibreCat: /record/22175
DOI: http://utw10945.utweb.utexas.edu/Manuscripts/2013/2013-03-Josupeit.pdf

@inproceedingsRüsenberg_Schmid_2013, title=Advanced characterization method of Nylon 12 materials for application in laser sinter processing, volume=29, DOI=10.1063/1.4873877, booktitle=International Conference of the Polymer-Processing-Society (PPS), author=Rüsenberg, Stefan and Schmid, Hans-Joachim, year=2013 
LibreCat: /record/22192
DOI: 10.1063/1.4873877

@inproceedingsJosupeit_Rüsenberg_Schmid_2013, title=Mechanische und rheologische Untersuchungen neuer Laser Sinter Materialien, volume=7, DOI=https://www.rp-netzwerk.de/images/stories/pdf/rapid_7/Universitaet_Paderborn_DMRC_RP-Forum2013.pdf, booktitle=Merseburger Rapid Prototyping Forum, author=Josupeit, Stefan and Rüsenberg, Stefan and Schmid, Hans-Joachim, year=2013 
LibreCat: /record/22197
DOI: https://www.rp-netzwerk.de/images/stories/pdf/rapid_7/Universitaet_Paderborn_DMRC_RP-Forum2013.pdf

@inproceedingsRüsenberg_Bagsik_Büsching_Schmid_2013, title=Additiv versus Konventionell: Benchmarking am Beispiel eines Designs aus der Luftfahrtindustrie, booktitle=RapidTech, author=Rüsenberg, Stefan and Bagsik, A. and Büsching, J. and Schmid, Hans-Joachim, year=2013 
LibreCat: /record/22201

@inproceedingsAdam_Zimmer_2013, title=Design for additive manufacturing, author=Adam, Guido and Zimmer, Detmar, year=2013 
LibreCat: /record/22373

@inproceedingsAdam_2013, title=Die Potentiale additiver Fertigung nutzen, author=Adam, Guido, year=2013 
LibreCat: /record/22375

@inproceedingsAdam_2013, title=Konstruktionsregeln für additive Fertigungsverfahren - Ausbildung, Lehre, author=Adam, Guido, year=2013 
LibreCat: /record/22376

@inproceedingsLindemann_Jahnke_Moi_Koch_2013, title=Impact and Influence Factors of Additive Manufacturing on Product Lifecycle Costs, volume=24, DOI=http://utw10945.utweb.utexas.edu/Manuscripts/2013/2013-79-Lindemann.pdf, booktitle=24th Annual International Solid Freeform Fabrication Symposium, author=Lindemann, C. and Jahnke, U. and Moi, M. and Koch, R., year=2013, pages=998–1008 
LibreCat: /record/21682
DOI: http://utw10945.utweb.utexas.edu/Manuscripts/2013/2013-79-Lindemann.pdf

@inproceedingsFischer_Schöppner_2013, title=Some Investigations Regarding the Surface Treatment of Ultem 9085 Parts Manufactured with Fused Deposition Modeling, volume=24, DOI=http://utw10945.utweb.utexas.edu/Manuscripts/2013/2013-64-Fischer.pdf, booktitle=24th Annual International Solid Freeform Fabrication Symposium, author=Fischer, M. and Schöppner, Volker, year=2013, pages=805–815 
LibreCat: /record/22017
DOI: http://utw10945.utweb.utexas.edu/Manuscripts/2013/2013-64-Fischer.pdf

@bookBecker_2013, title=Qualitätsmanagement in der zivilen Gefahrenabwehrf: Optimierung von Führungsprozessen durch interaktive SOPs , author=Becker, Tobias , year=2013 
LibreCat: /record/42097

@articleAdam_Zimmer_2013, title=Konstruktionsregeln für additive Fertigungsverfahren , volume=7, DOI=https://www.researchgate.net/publication/274190643_Konstruktionsregeln_fur_additive_Fertigungsverfahren , number=8, journal=Konstruktion, author=Adam, Guido and Zimmer, Detmar, year=2013, pages=77–82 
LibreCat: /record/22374
DOI: https://www.researchgate.net/publication/274190643_Konstruktionsregeln_fur_additive_Fertigungsverfahren 

@inproceedingsDelfs_Herale_Li_Schmid_2014, title=Simulation of the Surface Topography on Laser Sintered Polymer Parts, volume=25, DOI=http://utw10945.utweb.utexas.edu/sites/default/files/2014-098-Delfs.pdf, booktitle=25th Annual International Solid Freeform Fabrication Symposium, author=Delfs, Patrick and Herale, A.A. and Li, Z. and Schmid, Hans-Joachim, year=2014, pages=1250–1258 
LibreCat: /record/22176
DOI: http://utw10945.utweb.utexas.edu/sites/default/files/2014-098-Delfs.pdf

@inproceedingsJosupeit_Schmid_2014, title=Three-dimensional in-process temperature measurement of laser sintered part cakes, volume=25, DOI=http://utw10945.utweb.utexas.edu/sites/default/files/2014-006-Josupeit.pdf, booktitle=25th Annual International Solid Freeform Fabrication Symposium, author=Josupeit, Stefan and Schmid, Hans-Joachim, year=2014, pages=49–58 
LibreCat: /record/22177
DOI: http://utw10945.utweb.utexas.edu/sites/default/files/2014-006-Josupeit.pdf

@inproceedingsJosupeit_Rüsenberg_Rupp_Gessler_Schmid_2014, title=Thermal ageing of polyamide 12 used for polymer laser sintering - influence on part quality characteristics, volume=72, DOI=https://www.researchgate.net/publication/283135483_Thermal_ageing_of_polyamide_12_used_for_polymer_laser_sintering_-_Influence_on_part_quality_characteristics, number=3, booktitle=72nd Annual Technical Conference of the Society of Plastics Engineers (ANTEC 2014), author=Josupeit, Stefan and Rüsenberg, Stefan and Rupp, N. and Gessler, Monika and Schmid, Hans-Joachim, year=2014, pages=2383–2385 
LibreCat: /record/22184
DOI: https://www.researchgate.net/publication/283135483_Thermal_ageing_of_polyamide_12_used_for_polymer_laser_sintering_-_Influence_on_part_quality_characteristics

@inproceedingsJosupeit_Ordia_Schmid_2014, title=Development of a Basic Model to Simulate the Laser Sintering Cooling Process, volume=5, DOI=https://www.researchgate.net/profile/Saeed_Khademzadeh2/publication/303022441_Geometrical_characterization_of_thin_walls_produced_by_micro_laser_sintering/links/5735cc7f08ae298602e08f1f/Geometrical-characterization-of-thin-walls-produced-by-micro-laser-sintering.pdf, booktitle=International Conference on Additive Technologies, author=Josupeit, Stefan and Ordia, L. and Schmid, Hans-Joachim, year=2014, pages=222–227 
LibreCat: /record/22193
DOI: https://www.researchgate.net/profile/Saeed_Khademzadeh2/publication/303022441_Geometrical_characterization_of_thin_walls_produced_by_micro_laser_sintering/links/5735cc7f08ae298602e08f1f/Geometrical-characterization-of-thin-walls-produced-by-micro-laser-sintering.pdf

@inproceedingsDelfs_Schmid_2014, title=Simulation of the Surface Topography on Laser Sintered Polymer Parts, volume=25, DOI=http://utw10945.utweb.utexas.edu/sites/default/files/2014-098-Delfs.pdf, booktitle=25th Annual International Solid Freeform Fabrication Symposium, author=Delfs, Patrick and Schmid, Hans-Joachim, year=2014, pages=1250–1258 
LibreCat: /record/22203
DOI: http://utw10945.utweb.utexas.edu/sites/default/files/2014-098-Delfs.pdf

@inproceedingsAdam_Zimmer_2014, title=Extension of prior developed design rules (LS), DOI=https://www.researchgate.net/publication/274193378_Extension_of_prior_developed_design_rules%27_range_of_validity_for_different_boundary_conditions_in_laser_sintering , booktitle=ASPE - Spring topical meeting 2014, author=Adam, Guido and Zimmer, Detmar, year=2014 
LibreCat: /record/22382
DOI: https://www.researchgate.net/publication/274193378_Extension_of_prior_developed_design_rules%27_range_of_validity_for_different_boundary_conditions_in_laser_sintering 

@inproceedingsAdam_Zimmer_2014, title=Systematic investigations of minimum feature sizes and geometrical accuracies, author=Adam, Guido and Zimmer, Detmar, year=2014 
LibreCat: /record/22383

@inproceedingsAdam_2014, title=Erweiterung des Gültigkeitsbereichs von Konstruktionsregeln beim Lasersintern, author=Adam, Guido, year=2014 
LibreCat: /record/22385

@inproceedingsAdam_2014, title=Extension of prior developed design rules for laser sintering, author=Adam, Guido, year=2014 
LibreCat: /record/22386

@inproceedingsFischer_Schöppner_2014, title=Finishing of ABS-M30 Parts Manufactured with Fused Deposition Modeling with Focus on Dimensional Accuracy, volume=25, DOI=http://utw10945.utweb.utexas.edu/sites/default/files/2014-073-Fischer.pdf, booktitle=25th Annual International Solid Freeform Fabrication Symposium, author=Fischer, M. and Schöppner, Volker, year=2014, pages=923–934 
LibreCat: /record/22018
DOI: http://utw10945.utweb.utexas.edu/sites/default/files/2014-073-Fischer.pdf

@inproceedingsFischer_Schöppner_2014, title=Effects of a mass finishing process on parts produced from Ultem 9085 by Fused Deposition Modeling, booktitle=ANTEC, publisher=SPE: Society of Plastics Engineers, author=Fischer, M. and Schöppner, Volker, year=2014, pages=2331–2336 
LibreCat: /record/22030

@inproceedingsBagsik_Josupeit_Schöppner_Klemp_2014, title=Mechanical Analysis of Lightweight Constructions manufactured with Fused Deposition Modeling, volume=29, DOI=10.1063/1.4873874, booktitle=29th International Conference of the Polymer Processing Society, publisher=American Institute of Physics , author=Bagsik, A. and Josupeit, S. and Schöppner, Volker and Klemp, E., year=2014, pages=696–701 
LibreCat: /record/22021
DOI: 10.1063/1.4873874

@articleRüsenberg_Josupeit_Schmid_2014, title=A method to characterize the quality of a polymer laser sintering process , volume=6, DOI=10.1155/2014/185374, journal=Advances in Mechanical Engineering, publisher=SAGE Publications, author=Rüsenberg, Stefan and Josupeit, Stefan and Schmid, Hans-Joachim, year=2014, pages=1687–8140 
LibreCat: /record/22186
DOI: 10.1155/2014/185374

@articleAdam_Zimmer_2014, title=Design for Additive Manufacturing - Element transitions and aggregated structures, volume=7, DOI=10.1016/j.cirpj.2013.10.001 , number=1, journal=CIRP Journal of Manufacturing Science and Technology, author=Adam, Guido and Zimmer, Detmar, year=2014, pages=20–28 
LibreCat: /record/22384
DOI: 10.1016/j.cirpj.2013.10.001 

@articleDeppe_Koch_2014, title=Exploring the influence of an Additive Manufacturing integration on future MRO processes in aeronautics, volume=2014, DOI=https://www.rtejournal.de/ausgabe11/3958, number=11, journal=Rtejournal, author=Deppe, G. and Koch, R., year=2014 
LibreCat: /record/21706
DOI: https://www.rtejournal.de/ausgabe11/3958

@articleLeuders_Lieneke_Lammers_Tröster_Niendorf_2014, title=On the fatigue properties of metals manufactured by selective laser melting – The role of ductility, DOI=10.1557/jmr.2014.157, journal=Journal of Materials Research, author=Leuders, Stefan and Lieneke, Tobias and Lammers, Stefan and Tröster, Thomas and Niendorf, Thomas, year=2014, pages=1911–1919 
LibreCat: /record/15965
DOI: 10.1557/jmr.2014.157

@inproceedingsReschetnik_Riemer_Richard_2015, title=Einsatz additiver Fertigung zur Optimierung des Ermüdungsverhaltens von gekerbten Strukturen, booktitle=DVM - Tagung - Additiv gefertigte Bauteile und Strukturen, Deutscher Verband für Materialforschung und -prüfung e.V., author=Reschetnik, W. and Riemer, A. and Richard, H.A., year=2015, pages=63–72 
LibreCat: /record/22108

@inproceedingsKlemp_2015, title=Industrial applications in AM - aerospace and overhaul, booktitle=ASME AM3D Conference and Expo, author=Klemp, E., year=2015 
LibreCat: /record/22166

@inproceedingsKlemp_2015, title=Paradigmenwechsel mit Additiven Fertigungsverfahren - Möglichkeiten und Chancen, booktitle=Generatives Fertigen und 3D-Drucken: Industrielle Revolution oder Hype? Wissenschaftliches Kolloquium, author=Klemp, E., year=2015 
LibreCat: /record/22168

@inproceedingsKlemp_2015, title=Möglichkeiten, Chancen und Mythen additiver Fertigung, booktitle=Hanse-Aerospace-Themennachmittag im Hause SLM, author=Klemp, E., year=2015 
LibreCat: /record/22169

@inproceedingsKlemp_2015, title=Additive Manufacturing - Potenziale, Zukunftschancen und Hürden, booktitle=Messe Interzum, author=Klemp, E., year=2015 
LibreCat: /record/22170

@inproceedingsKlemp_2015, title=Technology Update 2015 for Metals, booktitle=SLM-Usermeeting, author=Klemp, E., year=2015 
LibreCat: /record/22171

@inproceedingsKlemp_2015, title=AM-Verfahren - Möglichkeiten in der industriellen Fertigung, booktitle=VDMA - Symposium auf der Hannover Messe Industrie, author=Klemp, E., year=2015 
LibreCat: /record/22172

@inproceedingsDelfs_Li_Schmid_2015, title=Mass finishing of laser sintered parts, volume=26, DOI=http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-41-Delfs.pdf, booktitle=26th Annual International Solid Freeform Fabrication Symposium, author=Delfs, Patrick and Li, Z. and Schmid, Hans-Joachim, year=2015, pages=514–526 
LibreCat: /record/22178
DOI: http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-41-Delfs.pdf

@inproceedingsJosupeit_Schmid_2015, title=Temperature History within Laser Sintered Part Cakes and its Influence on Process Quality, volume=26, DOI=http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-15-Josupeit.pdf, booktitle=26th Annual International Solid Freeform Fabrication Symposium, author=Josupeit, Stefan and Schmid, Hans-Joachim, year=2015, pages=190–199 
LibreCat: /record/22179
DOI: http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-15-Josupeit.pdf

@inproceedingsJosupeit_Lohn_Hermann_Gessler_Tenbrink_Schmid_2015, title=Material Properties of Laser Sintered Polyamide 12 as Function of Build Cycles Using Low Refresh Rates, volume=26, DOI=http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-43-Josupeit.pdf, booktitle=26th Annual International Solid Freeform Fabrication Symposium, author=Josupeit, Stefan and Lohn, Johannes and Hermann, E. and Gessler, Monika and Tenbrink, S. and Schmid, Hans-Joachim, year=2015, pages=540–549 
LibreCat: /record/22187
DOI: http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-43-Josupeit.pdf

@inproceedingsDelfs_Toews_Schmid_2015, title=Surface roughness optimized alignment of parts for additive manufacturing processes, volume=26, DOI=http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-107-Delfs.pdf, booktitle=26th Annual International Solid Freeform Fabrication Symposium, author=Delfs, Patrick and Toews, Marcel and Schmid, Hans-Joachim, year=2015, pages=1334–1344 
LibreCat: /record/22189
DOI: http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-107-Delfs.pdf

@inproceedingsJosupeit_Tutzschky_Gessler_Schmid_2015, title=Powder ageing and material properties of laser sintered polyamide 12 using low refresh rates, DOI=10.1007/978-3-662-48473-9_5, booktitle=Proceedings of the Rapid Tech 2015, publisher=Springer Vieweg, author=Josupeit, Stefan and Tutzschky, S. and Gessler, M. and Schmid, Hans-Joachim, year=2015, pages=63–78 
LibreCat: /record/22199
DOI: 10.1007/978-3-662-48473-9_5

@inproceedingsLieneke_Adam_Leuders_Knoop_Josupeit_Delfs_Funke_Zimmer_2015, title=Entwicklung einer Methode zur systematischen Erarbeitung von Maßtoleranzen für additive Fertigungsverfahren, booktitle=Proceedings of the Rapid Tech 2015, author=Lieneke, Tobias and Adam, Guido and Leuders, Stefan and Knoop, Frederick and Josupeit, Stefan and Delfs, Patrick and Funke, Nils and Zimmer, Detmar, year=2015 
LibreCat: /record/22395

@inproceedingsLieneke_Adam_Leuders_Knoop_Josupeit_Delfs_Funke_Zimmer_2015, title=Systematical determination of tolerances for additive manufacturing by measuring linear dimensions, volume=26, DOI=https://www.researchgate.net/publication/316827402_Systematical_Determination_of_Tolerances_for_Additive_Manufacturing_by_Measuring_Linear_Dimensions, booktitle=26th Annual International Solid Freeform Fabrication Symposium, author=Lieneke, Tobias and Adam, Guido and Leuders, Stefan and Knoop, Frederick and Josupeit, Stefan and Delfs, Patrick and Funke, Nils and Zimmer, Detmar, year=2015, pages=371–384 
LibreCat: /record/22396
DOI: https://www.researchgate.net/publication/316827402_Systematical_Determination_of_Tolerances_for_Additive_Manufacturing_by_Measuring_Linear_Dimensions

@inproceedingsAdam_2015, title=On tolerances for additive manufacturing, booktitle=Inside 3D Printing Conference and Expo, author=Adam, Guido, year=2015 
LibreCat: /record/22398

@inproceedingsLieneke_2015, title=Entwicklung einer Methode zur systematischen Erarbeitung von Maßtoleranzen für additive Fertigungsverfahren, booktitle=Rapid Tech 2015, author=Lieneke, Tobias, year=2015 
LibreCat: /record/22399

@inproceedingsLieneke_2015, title=Systematical determination of dimensional tolerances for additive manufacturing , volume=26, booktitle=26th Annual International Solid Freeform Fabrication Symposium, author=Lieneke, Tobias, year=2015 
LibreCat: /record/22400

@inproceedingsLindemann_Jahnke_Reiher_Koch_2015, title=Towards a sustainable and economic selection of part candidates for Additive Manufacturing, volume=21, DOI=https://doi.org/10.1108/RPJ-12-2014-0179, number=2, booktitle=Rapid Prototyping Journal, publisher=Emerald, author=Lindemann, C. and Jahnke, U. and Reiher, T. and Koch, R., year=2015, pages=216–227 
LibreCat: /record/21683
DOI: https://doi.org/10.1108/RPJ-12-2014-0179

@inproceedingsDeppe_Lindemann_Koch_2015, title=Developement of an economic decision support for the application of Additive Manufacturing in aerospace, volume=26, DOI=http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-125-Deppe.pdf, booktitle=26th Annual International Solid Freeform Fabrication Symposium, author=Deppe, G. and Lindemann, C. and Koch, R., year=2015, pages=1560–1563 
LibreCat: /record/21684
DOI: http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-125-Deppe.pdf

@inproceedingsJahnke_Büsching_Reiher_Koch_2015, title=Protection measures against product piracy and application by the use of AM, volume=26, DOI=http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-128-Jahnke.pdf, booktitle=26th Annual International Solid Freeform Fabrication Symposium, author=Jahnke, U. and Büsching, J. and Reiher, T. and Koch, R., year=2015, pages=1601–1611 
LibreCat: /record/21685
DOI: http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-128-Jahnke.pdf

@inproceedingsReiher_Koch_2015, title=FE-Optimization and data handling for Additive Manufacturing of structural parts, volume=26, DOI=http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-90-Reiher.pdf, booktitle=26th Annual International Solid Freeform Fabrication Symposium, author=Reiher, T. and Koch, R., year=2015, pages=1092–1103 
LibreCat: /record/21686
DOI: http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-90-Reiher.pdf

@inproceedingsJahnke_Lindemann_2015, title=Sustainable Part Selection for the Use of Additive Manufacturing in Companies Focussing on Prevention of Product Piracy, booktitle=Inside 3D Printing Conference and Expo, author=Jahnke, U. and Lindemann, C., year=2015 
LibreCat: /record/21700

@inproceedingsDeppe_Reiher_Koch_2015, title=Exploring the cost and lifetime benefits of a topology optimized aerospace part applying additive manufacturing, volume=5, DOI=https://www.th-owl.de/elsa/download/335/336/PEM_Tagung_zusammen2015.pdf, booktitle=International Conference Production Engineering and Management 2015, author=Deppe, G. and Reiher, T. and Koch, R., year=2015, pages=219–230 
LibreCat: /record/21701
DOI: https://www.th-owl.de/elsa/download/335/336/PEM_Tagung_zusammen2015.pdf

@inproceedingsLindemann_Reiher_Koch_2015, title=Guidelines for a sustainable and economic selection of part candidates for space applications using additive manufacturing, booktitle=Paris Space Week, author=Lindemann, C. and Reiher, T. and Koch, R., year=2015 
LibreCat: /record/21703

@inproceedingsKnoop_Schöppner_2015, title=Analysis and Optimization of the Dimensional Accuracy for FDM Parts manufactured with ABS-M30, DOI=https://www.researchgate.net/publication/283735736_Analysis_and_optimization_of_the_dimensional_accuracy_for_FDM_parts_manufactured_with_ABS-M30, booktitle=ASPE Spring Topical Meeting, author=Knoop, F. and Schöppner, Volker, year=2015, pages=26–31 
LibreCat: /record/22031
DOI: https://www.researchgate.net/publication/283735736_Analysis_and_optimization_of_the_dimensional_accuracy_for_FDM_parts_manufactured_with_ABS-M30

@inproceedingsKnoop_Schöppner_2015, title=Mechanical and Thermal Properties of FDM Parts manufactured with Polyamide 12, volume=26, DOI=http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-77-Knoop.pdf, booktitle=26th Annual International Solid Freeform Fabrication Symposium, author=Knoop, F. and Schöppner, Volker, year=2015, pages=935–948 
LibreCat: /record/22044
DOI: http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-77-Knoop.pdf

@bookRüsenberg_2015, place=Düren, series=Forschungsberichte des Direct Manufacturing Research Centers, title=Prozessqualifizierung zur verlässlichen Herstellung von Produkten im Polymer Lasersinterverfahren, volume=Band, 2, publisher=Shaker Verlag GmbH, author=Rüsenberg, Stefan, year=2015, collection=Forschungsberichte des Direct Manufacturing Research Centers 
LibreCat: /record/24751

@bookAdam_2015, title=Systematische Erarbeitung von Konstruktionsregeln für die additiven Fertigungsverfahren Lasersintern, Laserschmelzen und Fused Deposition Modeling, publisher=Shaker Verlag, author=Adam, Guido, year=2015 
LibreCat: /record/22397

@articledell’Aere_Zimmer_2015, title=On design for Additive Manufacturing - evaluating geometrical limitations, volume=21, DOI=10.1108/RPJ-06-2013-0060, number=6, journal=Rapid Prototyping Journal, publisher=Emerald Group Publishing Limited, author=dell’Aere, Guido and Zimmer, Detmar, year=2015, pages=662–670 
LibreCat: /record/22394
DOI: 10.1108/RPJ-06-2013-0060

@bookLindemann_Deppe_Koch_2016, title=Scenario Based Outlook of Additive Manufacturing Applications for the Aerospace Market, publisher=Metropolis Verlag, author=Lindemann, C. and Deppe, G. and Koch, R., year=2016 
LibreCat: /record/21698

@bookJahnke_Koch_2016, title=Prevention of Product Piracy - Potentials of Additive Manufacturing, publisher=Metropolis Verlag, author=Jahnke, U. and Koch, R., year=2016 
LibreCat: /record/21699

@inproceedingsBrüggemann_Reschetnik_Richard_Kullmer_Schramm_2016, title=Festigkeits- und leichtbauoptimierte Konstruktion und Auslegung eines additiv gefertigten Fahrradvorbaus, DOI=10.3139/9783446450608.025, booktitle=Rapid Tech - International Trade Show &; Conference for Additive Manufacturing, author=Brüggemann, J.P. and Reschetnik, W. and Richard, H.A. and Kullmer, G. and Schramm, B., year=2016, pages=290–300 
LibreCat: /record/22107
DOI: 10.3139/9783446450608.025

@inproceedingsReschetnik_Grylls_Bauer_Richard_Kullmer_2016, title=Fatigue Life Manipulation of SLM Parts, author=Reschetnik, W. and Grylls, R. and Bauer, B. and Richard, H.A. and Kullmer, G., year=2016 
LibreCat: /record/22109

@inproceedingsBrüggemann_Riemer_Reschetnik_Aydinöz_Kullmer_Richard_Schaper_2016, title=Optimierung von Fahrradtretkurbeln mittels additiver Fertigung, booktitle=DVM - Tagung - Additiv gefertigte Bauteile und Strukturen, Deutscher Verband für Materialforschung und -prüfung e.V., author=Brüggemann, J.P. and Riemer, A. and Reschetnik, W. and Aydinöz, M.E. and Kullmer, G. and Richard, H.A. and Schaper, M., year=2016, pages=101–112 
LibreCat: /record/22128

@inproceedingsReschetnik_Brüggemann_Aydinöz_Kullmer_Richard_Schaper_2016, title=Lebensdauerbeeinflussung durch Additive Fertigung, booktitle=DVM - Tagung - Additiv gefertigte Bauteile und Strukturen, Deutscher Verband für Materialforschung und -prüfung e.V., author=Reschetnik, W. and Brüggemann, J.P. and Aydinöz, M.E. and Kullmer, G. and Richard, H.A. and Schaper, M., year=2016, pages=131–140 
LibreCat: /record/22130

@inproceedingsRiemer_Leuders_Kullmer_Richard_2016, title=Materialkennwerte lasergeschmolzener Werkstoffe, booktitle=DVM - Tagung - Additiv gefertigte Bauteile und Strukturen, Deutscher Verband für Materialforschung und -prüfung e.V., author=Riemer, A. and Leuders, L. and Kullmer, G. and Richard, H.A., year=2016, pages=161–174 
LibreCat: /record/22132

@inproceedingsReschetnik_Brüggemann_Aydinöz_Grydin_Hoyer_Kullmer_Richard_2016, title=Fatigue crack growth behavior and mechanical properties of additively processed EN AW-7075 aluminium alloy, booktitle=Procedia Structural Integrity, author=Reschetnik, W. and Brüggemann, J.P. and Aydinöz, M.E. and Grydin, O. and Hoyer, K.P. and Kullmer, G. and Richard, H.A., year=2016, pages=3040–3048 
LibreCat: /record/22146

@inproceedingsRiemer_Richard_2016, title=Crack Propagation in Additive Manufactured Materials and Structures, booktitle=Procedia Structural Integrity, author=Riemer, A. and Richard, H.A., year=2016, pages=1229–1236 
LibreCat: /record/22149

@inproceedingsJosupeit_Delfs_Menge_Schmid_2016, title=Manufacturability and Mechanical Characterization of Laser Sintered Lattice Structures, volume=27, DOI=http://utw10945.utweb.utexas.edu/sites/default/files/2016/166-Josupeit.pdf, booktitle=27th Annual International Solid Freeform Fabrication Symposium , author=Josupeit, Stefan and Delfs, Patrick and Menge, Dennis and Schmid, Hans-Joachim, year=2016, pages=2077–2086 
LibreCat: /record/22180
DOI: http://utw10945.utweb.utexas.edu/sites/default/files/2016/166-Josupeit.pdf

@inproceedingsDelfs_Schmid_2016, title=Extended Analysis of the Surface Topography of Laser Sintered Polymer Parts , volume=3, DOI=https://www.bookshop.fraunhofer.de/buch/fraunhofer-direct-digital-manufacturing-conference-ddmc-2016/245111#, booktitle=Fraunhofer Direct Digital Manufacturing Conference, author=Delfs, Patrick and Schmid, Hans-Joachim, year=2016, pages=411–414 
LibreCat: /record/22190
DOI: https://www.bookshop.fraunhofer.de/buch/fraunhofer-direct-digital-manufacturing-conference-ddmc-2016/245111#

@inproceedingsJosupeit_Schmid_2016, title=Thermal properties of polyamide 12 powder for application in laser sintering, booktitle=International Congress on Particle Technology (PARTEC) , author=Josupeit, Stefan and Schmid, Hans-Joachim, year=2016 
LibreCat: /record/22194

@inproceedingsJosupeit_Delfs_Lieneke_Adam_Gessler_Pfisterer_Schmid_2016, title=Dimensional accuracy of polymer laser sintered parts: Influences and measures, DOI=10.3139/9783446450608.009, booktitle=Rapid Tech - International Trade Show &; Conference for Additive Manufacturing , author=Josupeit, Stefan and Delfs, Patrick and Lieneke, Tobias and Adam, Guido and Gessler, Monika and Pfisterer, H. and Schmid, Hans-Joachim, year=2016, pages=107–120 
LibreCat: /record/22200
DOI: 10.3139/9783446450608.009

@inproceedingsKünneke_Zimmer_2016, title=Funktionsintegration additiv gefertigter Dämpfungsstrukturen bei Biegeschwingungen, booktitle=DVM Tagung - Additiv gefertigte Bauteile und Strukturen, author=Künneke, Thomas and Zimmer, Detmar, year=2016, pages=151–160 
LibreCat: /record/22403

@inproceedingsLammers_Adam_Schmid_Mrozek_Oberacker_Hoffmann_Quattrone_Ponick_2016, title=Additive Manufacturing of a Lightweight Rotor for a Permanent Magnet Synchronous Machine, DOI=10.1109/EDPC.2016.7851312, booktitle=EDPC 2016, author=Lammers, Stefan and Adam, Guido and Schmid, Hans-Joachim and Mrozek, Rafael and Oberacker, Rainer and Hoffmann, Michael and Quattrone, Francesco and Ponick, Bernd, year=2016 
LibreCat: /record/22404
DOI: 10.1109/EDPC.2016.7851312

@inproceedingsJosupeit_Delfs_Lieneke_Schmid_2016, title=Influences on the dimensional Accuracy of Laser Sintered Parts along the Process Chain, booktitle=27th Annual International Solid Freeform Fabrication Symposium , author=Josupeit, Stefan and Delfs, Patrick and Lieneke, Tobias and Schmid, Hans-Joachim, year=2016 
LibreCat: /record/22408

@inproceedingsLieneke_de Groot_Adam_Zimmer_2016, title=Dimensional tolerances for additive manufacturing: Experimental investigation of manufacturing accuracy for selective laser melting, booktitle=ASPE 2016 Summer Topical Meeting, author=Lieneke, Tobias and de Groot, Stefan and Adam, Guido and Zimmer, Detmar, year=2016, pages=S.9-15 
LibreCat: /record/22409

@inproceedingsKnoop_Lieneke_Schoeppner_2016, title=Reproducibility of the Dimensional Accuracy - Investigations for FDM, DOI=10.3139/9783446454606.004, booktitle=ASPE Spring Topical Meeting, author=Knoop, Frederick and Lieneke, Tobias and Schoeppner, Volker, year=2016, pages=S.3-8 
LibreCat: /record/22410
DOI: 10.3139/9783446454606.004

@inproceedingsKnoop_Lieneke_Schoeppner_2016, title=Reproducibility of the Dimensional Accuracy - Investigations for FDM, booktitle=Summer Topical Meeting 2016, author=Knoop, Frederick and Lieneke, Tobias and Schoeppner, Volker, year=2016 
LibreCat: /record/22411

@inproceedingsLieneke_Denzer_Adam_Zimmer_2016, title=Dimensional tolerances for additive manufacturing: Experimental investigation for Fused Deposition Modeling, volume=43, DOI=10.1016/j.procir.2016.02.361, booktitle=CAT 2016, author=Lieneke, Tobias and Denzer, Vera and Adam, Guido and Zimmer, Detmar, year=2016, pages=286–291 
LibreCat: /record/22412
DOI: 10.1016/j.procir.2016.02.361

@inproceedingsDeppe_Koch_2016, title=Supporting the Decision Process for applying Additive Manufacturing in the MRO Aerospace Business by MADM, volume=27, DOI=http://utw10945.utweb.utexas.edu/sites/default/files/2016/006-Deppe.pdf, booktitle=27th Annual International Solid Freeform Fabrication Symposium , author=Deppe, G. and Koch, R., year=2016, pages=81–92 
LibreCat: /record/21687
DOI: http://utw10945.utweb.utexas.edu/sites/default/files/2016/006-Deppe.pdf

@inproceedingsReiher_Koch_2016, title=Product optimization with and for Additive Manufacturing, volume=27, DOI=http://utw10945.utweb.utexas.edu/sites/default/files/2016/179-Reiher.pdf, booktitle=27th Annual International Solid Freeform Fabrication Symposium , author=Reiher, T. and Koch, R., year=2016, pages=2236–2249 
LibreCat: /record/21688
DOI: http://utw10945.utweb.utexas.edu/sites/default/files/2016/179-Reiher.pdf

@inproceedingsLindemann_Koch_2016, title=Cost Efficient Design and Planning for Additive Manufacturing Technologies, volume=27, DOI=http://utw10945.utweb.utexas.edu/sites/default/files/2016/007-Lindemann.pdf, booktitle=27th Annual International Solid Freeform Fabrication Symposium , author=Lindemann, C. and Koch, R., year=2016, pages=93–112 
LibreCat: /record/21689
DOI: http://utw10945.utweb.utexas.edu/sites/default/files/2016/007-Lindemann.pdf

@inproceedingsReiher_Deppe_Koch_2016, title=Combining material efficiency and part reliability by product optimization applying additive manufacturing, volume=6, DOI=https://www.th-owl.de/elsa/download/333/334/PEM_2016_Proceeding_2016_09_14_Inhaltsnavigation.pdf, booktitle=International Conference Production Engineering and Management 2016, author=Reiher, T. and Deppe, G. and Koch, R., year=2016, pages=27–38 
LibreCat: /record/21702
DOI: https://www.th-owl.de/elsa/download/333/334/PEM_2016_Proceeding_2016_09_14_Inhaltsnavigation.pdf

@inproceedingsDeppe_Koch_2016, title=Unterstützung des AM Entscheidungsprozesses in der Luftfahrtersatzteilversorgung, volume=13, DOI=https://doi.org/10.3139/9783446450608.031, booktitle=Rapid Tech 2016, publisher=Hanser Verlag, author=Deppe, G. and Koch, R., year=2016, pages=349–360 
LibreCat: /record/21705
DOI: https://doi.org/10.3139/9783446450608.031

@inproceedingsGräßler_Taplick_Pottebaum_Scholle_Reiher_2016, title=Data Management for additive manufacturing: survey on requirements and current state, volume=14, DOI=https://www.designsociety.org/publication/38831/DATA+MANAGEMENT+FOR+ADDITIVE+MANUFACTURING%3A+SURVEY+ON+REQUIREMENTS+AND+CURRENT+STATE, booktitle=14th International DESIGN Conference 2016, author=Gräßler, I. and Taplick, P. and Pottebaum, J. and Scholle, P. and Reiher, T., year=2016 
LibreCat: /record/21997
DOI: https://www.designsociety.org/publication/38831/DATA+MANAGEMENT+FOR+ADDITIVE+MANUFACTURING%3A+SURVEY+ON+REQUIREMENTS+AND+CURRENT+STATE

@inproceedingsFischer_Schöppner_2016, title=Fatigue Behavior of FDM Parts Manufactured with Ultem 9085, volume=27, DOI=10.1007/s11837-016-2197-2, booktitle=27th Annual International Solid Freeform Fabrication Symposium , author=Fischer, M. and Schöppner, Volker, year=2016, pages=563–568 
LibreCat: /record/22019
DOI: 10.1007/s11837-016-2197-2

@inproceedingsFischer_Seewald_Schöppner_2016, title=Chemical Surface Treatment of Ultem 9085 Parts, DOI=10.3139/9783446450608.010, booktitle=Rapid Tech - International Trade Show &; Conference for Additive Manufacturing, publisher=Carl Hanser Verlag GmbH &; Co. KG, author=Fischer, M. and Seewald, O. and Schöppner, Volker, year=2016, pages=121–133 
LibreCat: /record/22039
DOI: 10.3139/9783446450608.010