Reschetnik, W., et al. “Beeinflussung Des Risswachstums Durch Kerben in Additiv Gefertigten Strukturen.” Additive Fertigung von Bauteilen Und Strukturen – Neue Erkenntnisse Und Praxisbeispiele.
LibreCat: /record/22111

Riemer, A., et al. Optimierung der Werkstoffperformance lasergeschmolzener metallischer Werkstoffe.
LibreCat: /record/22114

Bagsik, A., et al. “FDM Part Quality Manufactured with ULTEM 9085.”https://docplayer.net/255735-Fdm-part-quality-manufactured-with-ultem-9085.html__Proceedings of International Conference Polymeric Materials, 2010, doi:https://docplayer.net/255735-Fdm-part-quality-manufactured-with-ultem-9085.html.
LibreCat: /record/22050
DOI: https://docplayer.net/255735-Fdm-part-quality-manufactured-with-ultem-9085.html

Adam, Guido, and Detmar Zimmer. “Konstruktionsregeln Für Additive Fertigung in Lehre Und Forschung.”https://www.researchgate.net/publication/274193188_Konstruktionsregeln_fur_additive_Fertigung_in_Lehre_und_Forschung __Newsletter Berliner Kreis, vol. 15, 2010, pp. 22–23, doi:https://www.researchgate.net/publication/274193188_Konstruktionsregeln_fur_additive_Fertigung_in_Lehre_und_Forschung .
LibreCat: /record/22355
DOI: https://www.researchgate.net/publication/274193188_Konstruktionsregeln_fur_additive_Fertigung_in_Lehre_und_Forschung 

Rüsenberg, Stefan, et al. Porosity as a Key to Increase Material Properties of Laser Sintered Parts. 2011, pp. 531–38, doi:10.1201/b11341.
LibreCat: /record/22191
DOI: 10.1201/b11341

Adam, Guido, and Detmar Zimmer. Direct Manufacturing Design Rules. CRC Press, 2011, pp. 545–51, doi:10.1201/b11341-88.
LibreCat: /record/22358
DOI: 10.1201/b11341-88

Rüsenberg, Stefan, et al. “Mechanical and Physical Properties - A Way to Asses Quality of Laser Sintered Parts.”http://utw10945.utweb.utexas.edu/Manuscripts/2011/2011-19-Ruesenberg.pdf__22th Annual International Solid Freeform Fabrication Symposium, vol. 22, 2011, pp. 239–51, doi:http://utw10945.utweb.utexas.edu/Manuscripts/2011/2011-19-Ruesenberg.pdf.
LibreCat: /record/22188
DOI: http://utw10945.utweb.utexas.edu/Manuscripts/2011/2011-19-Ruesenberg.pdf

Zimmer, Detmar, and Guido Adam. “DMDR Direct Manufacturing Design Rules. Erarbeiten von Applikationsunabhängigen Konstruktionsregeln.” Rapid.Tech 2011 Fachmesse Und Anwendertagung Für Rapid-Technologie, 2011.
LibreCat: /record/22360

Bagsik, A., and Volker Schöppner. “Mechanical Properties of Fused Deposition Modeling Parts Manufactured with ULTEM*9085.”https://www.researchgate.net/profile/Volker_Schoeppner/publication/284341800_Mechanical_properties_of_fused_deposition_modeling_parts_manufactured_with_ULTEMzast9085/links/5c73971b458515831f6cd501/Mechanical-properties-of-fused-deposition-modeling-parts-manufactured-with-ULTEM-zast9085.pdf__ANTEC, 2011, pp. 1294–98, doi:https://www.researchgate.net/profile/Volker_Schoeppner/publication/284341800_Mechanical_properties_of_fused_deposition_modeling_parts_manufactured_with_ULTEMzast9085/links/5c73971b458515831f6cd501/Mechanical-properties-of-fused-deposition-modeling-parts-manufactured-with-ULTEM-zast9085.pdf.
LibreCat: /record/22029
DOI: https://www.researchgate.net/profile/Volker_Schoeppner/publication/284341800_Mechanical_properties_of_fused_deposition_modeling_parts_manufactured_with_ULTEMzast9085/links/5c73971b458515831f6cd501/Mechanical-properties-of-fused-deposition-modeling-parts-manufactured-with-ULTEM-zast9085.pdf

Rüsenberg, Stefan, et al. “Controlling the Quality of Laser Sintered Parts Along the Process Chain.”http://utw10945.utweb.utexas.edu/Manuscripts/2012/2012-78-Ruesenberg.pdf__23rd Annual International Solid Freeform Fabrication Symposium, vol. 23, 2012, pp. 1024–44, doi:http://utw10945.utweb.utexas.edu/Manuscripts/2012/2012-78-Ruesenberg.pdf.
LibreCat: /record/22174
DOI: http://utw10945.utweb.utexas.edu/Manuscripts/2012/2012-78-Ruesenberg.pdf

Rüsenberg, Stefan, and Hans-Joachim Schmid. “Mechanical Properties as a Result of Multitude of Parameters.”https://afpr.asso.fr/content/assises/2012/actes/papiers/s5_2.pdf__The European Forum on Additive Manufacturing, vol. 17, 2012, doi:https://afpr.asso.fr/content/assises/2012/actes/papiers/s5_2.pdf.
LibreCat: /record/22204
DOI: https://afpr.asso.fr/content/assises/2012/actes/papiers/s5_2.pdf

Adam, Guido, and Detmar Zimmer. Elementbasierte Erarbeitung von Konstruktionsregeln Für Additive Fertigung. 2012.
LibreCat: /record/22364

Lindemann, C., et al. “Analyzing Product Lifecycle Costs for a Better Understanding of Cost Drivers in Additve Manufacturing.”http://utw10945.utweb.utexas.edu/Manuscripts/2012/2012-12-Lindemann.pdf__23rd Annual International Solid Freeform Fabrication Symposium, vol. 23, 2012, pp. 177–88, doi:http://utw10945.utweb.utexas.edu/Manuscripts/2012/2012-12-Lindemann.pdf.
LibreCat: /record/21680
DOI: http://utw10945.utweb.utexas.edu/Manuscripts/2012/2012-12-Lindemann.pdf

Bagsik, A., et al. “Long-Term Ageing Effects on Fused Deposition Modeling Parts Manufactured with ULTEM*9085.”http://utw10945.utweb.utexas.edu/Manuscripts/2012/2012-48-Bagsik.pdf__23rd Annual International Solid Freeform Fabrication Symposium, vol. 23, 2012, pp. 629–40, doi:http://utw10945.utweb.utexas.edu/Manuscripts/2012/2012-48-Bagsik.pdf.
LibreCat: /record/22016
DOI: http://utw10945.utweb.utexas.edu/Manuscripts/2012/2012-48-Bagsik.pdf

Bagsik, A., et al. “Tensile and Flexural Properties of Fused Deposition Modeling Parts Manufactured with ULTEM*9085.” 1st International Conference on Thermo-Mechanically Graded Materials, vol. 1, 2012, pp. 129–34.
LibreCat: /record/22164

Bagsik, A., et al. “Extensive Analysis of the Mechanical Strength Properties of Fused Deposition Modeling Parts Manufactured with ULTEM 9085.”https://www.tib.eu/de/suchen/id/TIBKAT%3A756276616__5th International Conference on Polymer and Mould Innovations, vol. 5, Centre for Polymer and Material Technology, Univ. College, Ghent Univ., 2012, pp. 266–72, doi:https://www.tib.eu/de/suchen/id/TIBKAT%3A756276616.
LibreCat: /record/22024
DOI: https://www.tib.eu/de/suchen/id/TIBKAT%3A756276616

Josupeit, Stefan, et al. “A Material-Based Quality Concept for Polymer Laser Sintering.”http://utw10945.utweb.utexas.edu/Manuscripts/2013/2013-03-Josupeit.pdf__24th Annual International Solid Freeform Fabrication Symposium , vol. 24, 2013, pp. 44–54, doi:http://utw10945.utweb.utexas.edu/Manuscripts/2013/2013-03-Josupeit.pdf.
LibreCat: /record/22175
DOI: http://utw10945.utweb.utexas.edu/Manuscripts/2013/2013-03-Josupeit.pdf

Rüsenberg, Stefan, and Hans-Joachim Schmid. “Advanced Characterization Method of Nylon 12 Materials for Application in Laser Sinter Processing.”10.1063/1.4873877__International Conference of the Polymer-Processing-Society (PPS), vol. 29, 2013, doi:10.1063/1.4873877.
LibreCat: /record/22192
DOI: 10.1063/1.4873877

Josupeit, Stefan, et al. “Mechanische Und Rheologische Untersuchungen Neuer Laser Sinter Materialien.”https://www.rp-netzwerk.de/images/stories/pdf/rapid_7/Universitaet_Paderborn_DMRC_RP-Forum2013.pdf__Merseburger Rapid Prototyping Forum, vol. 7, 2013, doi:https://www.rp-netzwerk.de/images/stories/pdf/rapid_7/Universitaet_Paderborn_DMRC_RP-Forum2013.pdf.
LibreCat: /record/22197
DOI: https://www.rp-netzwerk.de/images/stories/pdf/rapid_7/Universitaet_Paderborn_DMRC_RP-Forum2013.pdf

Rüsenberg, Stefan, et al. “Additiv versus Konventionell: Benchmarking Am Beispiel Eines Designs Aus Der Luftfahrtindustrie.” RapidTech, 2013.
LibreCat: /record/22201

Adam, Guido, and Detmar Zimmer. Design for Additive Manufacturing. 2013.
LibreCat: /record/22373

Adam, Guido. Die Potentiale Additiver Fertigung Nutzen. 2013.
LibreCat: /record/22375

Adam, Guido. Konstruktionsregeln Für Additive Fertigungsverfahren - Ausbildung, Lehre. 2013.
LibreCat: /record/22376

Lindemann, C., et al. “Impact and Influence Factors of Additive Manufacturing on Product Lifecycle Costs.”http://utw10945.utweb.utexas.edu/Manuscripts/2013/2013-79-Lindemann.pdf__24th Annual International Solid Freeform Fabrication Symposium, vol. 24, 2013, pp. 998–1008, doi:http://utw10945.utweb.utexas.edu/Manuscripts/2013/2013-79-Lindemann.pdf.
LibreCat: /record/21682
DOI: http://utw10945.utweb.utexas.edu/Manuscripts/2013/2013-79-Lindemann.pdf

Fischer, M., and Volker Schöppner. “Some Investigations Regarding the Surface Treatment of Ultem 9085 Parts Manufactured with Fused Deposition Modeling.”http://utw10945.utweb.utexas.edu/Manuscripts/2013/2013-64-Fischer.pdf__24th Annual International Solid Freeform Fabrication Symposium, vol. 24, 2013, pp. 805–15, doi:http://utw10945.utweb.utexas.edu/Manuscripts/2013/2013-64-Fischer.pdf.
LibreCat: /record/22017
DOI: http://utw10945.utweb.utexas.edu/Manuscripts/2013/2013-64-Fischer.pdf

Becker, Tobias. Qualitätsmanagement in Der Zivilen Gefahrenabwehrf: Optimierung von Führungsprozessen Durch Interaktive SOPs . 2013.
LibreCat: /record/42097

Adam, Guido, and Detmar Zimmer. “Konstruktionsregeln Für Additive Fertigungsverfahren .”https://www.researchgate.net/publication/274190643_Konstruktionsregeln_fur_additive_Fertigungsverfahren __Konstruktion, vol. 7, no. 8, 2013, pp. 77–82, doi:https://www.researchgate.net/publication/274190643_Konstruktionsregeln_fur_additive_Fertigungsverfahren .
LibreCat: /record/22374
DOI: https://www.researchgate.net/publication/274190643_Konstruktionsregeln_fur_additive_Fertigungsverfahren 

Delfs, Patrick, et al. “Simulation of the Surface Topography on Laser Sintered Polymer Parts.”http://utw10945.utweb.utexas.edu/sites/default/files/2014-098-Delfs.pdf__25th Annual International Solid Freeform Fabrication Symposium, vol. 25, 2014, pp. 1250–58, doi:http://utw10945.utweb.utexas.edu/sites/default/files/2014-098-Delfs.pdf.
LibreCat: /record/22176
DOI: http://utw10945.utweb.utexas.edu/sites/default/files/2014-098-Delfs.pdf

Josupeit, Stefan, and Hans-Joachim Schmid. “Three-Dimensional in-Process Temperature Measurement of Laser Sintered Part Cakes.”http://utw10945.utweb.utexas.edu/sites/default/files/2014-006-Josupeit.pdf__25th Annual International Solid Freeform Fabrication Symposium, vol. 25, 2014, pp. 49–58, doi:http://utw10945.utweb.utexas.edu/sites/default/files/2014-006-Josupeit.pdf.
LibreCat: /record/22177
DOI: http://utw10945.utweb.utexas.edu/sites/default/files/2014-006-Josupeit.pdf

Josupeit, Stefan, et al. “Thermal Ageing of Polyamide 12 Used for Polymer Laser Sintering - Influence on Part Quality Characteristics.”https://www.researchgate.net/publication/283135483_Thermal_ageing_of_polyamide_12_used_for_polymer_laser_sintering_-_Influence_on_part_quality_characteristics__72nd Annual Technical Conference of the Society of Plastics Engineers (ANTEC 2014), vol. 72, no. 3, 2014, pp. 2383–85, doi:https://www.researchgate.net/publication/283135483_Thermal_ageing_of_polyamide_12_used_for_polymer_laser_sintering_-_Influence_on_part_quality_characteristics.
LibreCat: /record/22184
DOI: https://www.researchgate.net/publication/283135483_Thermal_ageing_of_polyamide_12_used_for_polymer_laser_sintering_-_Influence_on_part_quality_characteristics

Josupeit, Stefan, et al. “Development of a Basic Model to Simulate the Laser Sintering Cooling Process.”https://www.researchgate.net/profile/Saeed_Khademzadeh2/publication/303022441_Geometrical_characterization_of_thin_walls_produced_by_micro_laser_sintering/links/5735cc7f08ae298602e08f1f/Geometrical-characterization-of-thin-walls-produced-by-micro-laser-sintering.pdf__International Conference on Additive Technologies, vol. 5, 2014, pp. 222–27, doi:https://www.researchgate.net/profile/Saeed_Khademzadeh2/publication/303022441_Geometrical_characterization_of_thin_walls_produced_by_micro_laser_sintering/links/5735cc7f08ae298602e08f1f/Geometrical-characterization-of-thin-walls-produced-by-micro-laser-sintering.pdf.
LibreCat: /record/22193
DOI: https://www.researchgate.net/profile/Saeed_Khademzadeh2/publication/303022441_Geometrical_characterization_of_thin_walls_produced_by_micro_laser_sintering/links/5735cc7f08ae298602e08f1f/Geometrical-characterization-of-thin-walls-produced-by-micro-laser-sintering.pdf

Delfs, Patrick, and Hans-Joachim Schmid. “Simulation of the Surface Topography on Laser Sintered Polymer Parts.”http://utw10945.utweb.utexas.edu/sites/default/files/2014-098-Delfs.pdf__25th Annual International Solid Freeform Fabrication Symposium, vol. 25, 2014, pp. 1250–58, doi:http://utw10945.utweb.utexas.edu/sites/default/files/2014-098-Delfs.pdf.
LibreCat: /record/22203
DOI: http://utw10945.utweb.utexas.edu/sites/default/files/2014-098-Delfs.pdf

Adam, Guido, and Detmar Zimmer. “Extension of Prior Developed Design Rules (LS).”https://www.researchgate.net/publication/274193378_Extension_of_prior_developed_design_rules%27_range_of_validity_for_different_boundary_conditions_in_laser_sintering __ASPE - Spring Topical Meeting 2014, 2014, doi:https://www.researchgate.net/publication/274193378_Extension_of_prior_developed_design_rules%27_range_of_validity_for_different_boundary_conditions_in_laser_sintering .
LibreCat: /record/22382
DOI: https://www.researchgate.net/publication/274193378_Extension_of_prior_developed_design_rules%27_range_of_validity_for_different_boundary_conditions_in_laser_sintering 

Adam, Guido, and Detmar Zimmer. Systematic Investigations of Minimum Feature Sizes and Geometrical Accuracies. 2014.
LibreCat: /record/22383

Adam, Guido. Erweiterung Des Gültigkeitsbereichs von Konstruktionsregeln Beim Lasersintern. 2014.
LibreCat: /record/22385

Adam, Guido. Extension of Prior Developed Design Rules for Laser Sintering. 2014.
LibreCat: /record/22386

Fischer, M., and Volker Schöppner. “Finishing of ABS-M30 Parts Manufactured with Fused Deposition Modeling with Focus on Dimensional Accuracy.”http://utw10945.utweb.utexas.edu/sites/default/files/2014-073-Fischer.pdf__25th Annual International Solid Freeform Fabrication Symposium, vol. 25, 2014, pp. 923–34, doi:http://utw10945.utweb.utexas.edu/sites/default/files/2014-073-Fischer.pdf.
LibreCat: /record/22018
DOI: http://utw10945.utweb.utexas.edu/sites/default/files/2014-073-Fischer.pdf

Fischer, M., and Volker Schöppner. “Effects of a Mass Finishing Process on Parts Produced from Ultem 9085 by Fused Deposition Modeling.” ANTEC, SPE: Society of Plastics Engineers, 2014, pp. 2331–36.
LibreCat: /record/22030

Bagsik, A., et al. “Mechanical Analysis of Lightweight Constructions Manufactured with Fused Deposition Modeling.”10.1063/1.4873874__29th International Conference of the Polymer Processing Society, vol. 29, American Institute of Physics , 2014, pp. 696–701, doi:10.1063/1.4873874.
LibreCat: /record/22021
DOI: 10.1063/1.4873874

Rüsenberg, Stefan, et al. “A Method to Characterize the Quality of a Polymer Laser Sintering Process .”10.1155/2014/185374__Advances in Mechanical Engineering, vol. 6, SAGE Publications, 2014, pp. 1687–8140, doi:10.1155/2014/185374.
LibreCat: /record/22186
DOI: 10.1155/2014/185374

Adam, Guido, and Detmar Zimmer. “Design for Additive Manufacturing - Element Transitions and Aggregated Structures.”10.1016/j.cirpj.2013.10.001 __CIRP Journal of Manufacturing Science and Technology, vol. 7, no. 1, 2014, pp. 20–28, doi:10.1016/j.cirpj.2013.10.001 .
LibreCat: /record/22384
DOI: 10.1016/j.cirpj.2013.10.001 

Deppe, G., and R. Koch. “Exploring the Influence of an Additive Manufacturing Integration on Future MRO Processes in Aeronautics.”https://www.rtejournal.de/ausgabe11/3958__Rtejournal, vol. 2014, no. 11, 2014, doi:https://www.rtejournal.de/ausgabe11/3958.
LibreCat: /record/21706
DOI: https://www.rtejournal.de/ausgabe11/3958

Leuders, Stefan, et al. “On the Fatigue Properties of Metals Manufactured by Selective Laser Melting – The Role of Ductility.”10.1557/jmr.2014.157__Journal of Materials Research, 2014, pp. 1911–19, doi:10.1557/jmr.2014.157.
LibreCat: /record/15965
DOI: 10.1557/jmr.2014.157

Reschetnik, W., et al. “Einsatz Additiver Fertigung Zur Optimierung Des Ermüdungsverhaltens von Gekerbten Strukturen.” DVM - Tagung - Additiv Gefertigte Bauteile Und Strukturen, Deutscher Verband Für Materialforschung Und -Prüfung e.V., 2015, pp. 63–72.
LibreCat: /record/22108

Klemp, E. “Industrial Applications in AM - Aerospace and Overhaul.” ASME AM3D Conference and Expo, 2015.
LibreCat: /record/22166

Klemp, E. “Paradigmenwechsel Mit Additiven Fertigungsverfahren - Möglichkeiten Und Chancen.” Generatives Fertigen Und 3D-Drucken: Industrielle Revolution Oder Hype? Wissenschaftliches Kolloquium, 2015.
LibreCat: /record/22168

Klemp, E. “Möglichkeiten, Chancen Und Mythen Additiver Fertigung.” Hanse-Aerospace-Themennachmittag Im Hause SLM, 2015.
LibreCat: /record/22169

Klemp, E. “Additive Manufacturing - Potenziale, Zukunftschancen Und Hürden.” Messe Interzum, 2015.
LibreCat: /record/22170

Klemp, E. “Technology Update 2015 for Metals.” SLM-Usermeeting, 2015.
LibreCat: /record/22171

Klemp, E. “AM-Verfahren - Möglichkeiten in Der Industriellen Fertigung.” VDMA - Symposium Auf Der Hannover Messe Industrie, 2015.
LibreCat: /record/22172

Delfs, Patrick, et al. “Mass Finishing of Laser Sintered Parts.”http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-41-Delfs.pdf__26th Annual International Solid Freeform Fabrication Symposium, vol. 26, 2015, pp. 514–26, doi:http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-41-Delfs.pdf.
LibreCat: /record/22178
DOI: http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-41-Delfs.pdf

Josupeit, Stefan, and Hans-Joachim Schmid. “Temperature History within Laser Sintered Part Cakes and Its Influence on Process Quality.”http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-15-Josupeit.pdf__26th Annual International Solid Freeform Fabrication Symposium, vol. 26, 2015, pp. 190–99, doi:http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-15-Josupeit.pdf.
LibreCat: /record/22179
DOI: http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-15-Josupeit.pdf

Josupeit, Stefan, et al. “Material Properties of Laser Sintered Polyamide 12 as Function of Build Cycles Using Low Refresh Rates.”http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-43-Josupeit.pdf__26th Annual International Solid Freeform Fabrication Symposium, vol. 26, 2015, pp. 540–49, doi:http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-43-Josupeit.pdf.
LibreCat: /record/22187
DOI: http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-43-Josupeit.pdf

Delfs, Patrick, et al. “Surface Roughness Optimized Alignment of Parts for Additive Manufacturing Processes.”http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-107-Delfs.pdf__26th Annual International Solid Freeform Fabrication Symposium, vol. 26, 2015, pp. 1334–44, doi:http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-107-Delfs.pdf.
LibreCat: /record/22189
DOI: http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-107-Delfs.pdf

Josupeit, Stefan, et al. “Powder Ageing and Material Properties of Laser Sintered Polyamide 12 Using Low Refresh Rates.”10.1007/978-3-662-48473-9_5__Proceedings of the Rapid Tech 2015, Springer Vieweg, 2015, pp. 63–78, doi:10.1007/978-3-662-48473-9_5.
LibreCat: /record/22199
DOI: 10.1007/978-3-662-48473-9_5

Lieneke, Tobias, et al. “Entwicklung Einer Methode Zur Systematischen Erarbeitung von Maßtoleranzen Für Additive Fertigungsverfahren.” Proceedings of the Rapid Tech 2015, 2015.
LibreCat: /record/22395

Lieneke, Tobias, et al. “Systematical Determination of Tolerances for Additive Manufacturing by Measuring Linear Dimensions.”https://www.researchgate.net/publication/316827402_Systematical_Determination_of_Tolerances_for_Additive_Manufacturing_by_Measuring_Linear_Dimensions__26th Annual International Solid Freeform Fabrication Symposium, vol. 26, 2015, pp. 371–84, doi:https://www.researchgate.net/publication/316827402_Systematical_Determination_of_Tolerances_for_Additive_Manufacturing_by_Measuring_Linear_Dimensions.
LibreCat: /record/22396
DOI: https://www.researchgate.net/publication/316827402_Systematical_Determination_of_Tolerances_for_Additive_Manufacturing_by_Measuring_Linear_Dimensions

Adam, Guido. “On Tolerances for Additive Manufacturing.” Inside 3D Printing Conference and Expo, 2015.
LibreCat: /record/22398

Lieneke, Tobias. “Entwicklung Einer Methode Zur Systematischen Erarbeitung von Maßtoleranzen Für Additive Fertigungsverfahren.” Rapid Tech 2015, 2015.
LibreCat: /record/22399

Lieneke, Tobias. “Systematical Determination of Dimensional Tolerances for Additive Manufacturing .” 26th Annual International Solid Freeform Fabrication Symposium, vol. 26, 2015.
LibreCat: /record/22400

Lindemann, C., et al. “Towards a Sustainable and Economic Selection of Part Candidates for Additive Manufacturing.”https://doi.org/10.1108/RPJ-12-2014-0179__Rapid Prototyping Journal, vol. 21, no. 2, Emerald, 2015, pp. 216–27, doi:https://doi.org/10.1108/RPJ-12-2014-0179.
LibreCat: /record/21683
DOI: https://doi.org/10.1108/RPJ-12-2014-0179

Deppe, G., et al. “Developement of an Economic Decision Support for the Application of Additive Manufacturing in Aerospace.”http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-125-Deppe.pdf__26th Annual International Solid Freeform Fabrication Symposium, vol. 26, 2015, pp. 1560–63, doi:http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-125-Deppe.pdf.
LibreCat: /record/21684
DOI: http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-125-Deppe.pdf

Jahnke, U., et al. “Protection Measures against Product Piracy and Application by the Use of AM.”http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-128-Jahnke.pdf__26th Annual International Solid Freeform Fabrication Symposium, vol. 26, 2015, pp. 1601–11, doi:http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-128-Jahnke.pdf.
LibreCat: /record/21685
DOI: http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-128-Jahnke.pdf

Reiher, T., and R. Koch. “FE-Optimization and Data Handling for Additive Manufacturing of Structural Parts.”http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-90-Reiher.pdf__26th Annual International Solid Freeform Fabrication Symposium, vol. 26, 2015, pp. 1092–103, doi:http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-90-Reiher.pdf.
LibreCat: /record/21686
DOI: http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-90-Reiher.pdf

Jahnke, U., and C. Lindemann. “Sustainable Part Selection for the Use of Additive Manufacturing in Companies Focussing on Prevention of Product Piracy.” Inside 3D Printing Conference and Expo, 2015.
LibreCat: /record/21700

Deppe, G., et al. “Exploring the Cost and Lifetime Benefits of a Topology Optimized Aerospace Part Applying Additive Manufacturing.”https://www.th-owl.de/elsa/download/335/336/PEM_Tagung_zusammen2015.pdf__International Conference Production Engineering and Management 2015, vol. 5, 2015, pp. 219–30, doi:https://www.th-owl.de/elsa/download/335/336/PEM_Tagung_zusammen2015.pdf.
LibreCat: /record/21701
DOI: https://www.th-owl.de/elsa/download/335/336/PEM_Tagung_zusammen2015.pdf

Lindemann, C., et al. “Guidelines for a Sustainable and Economic Selection of Part Candidates for Space Applications Using Additive Manufacturing.” Paris Space Week, 2015.
LibreCat: /record/21703

Knoop, F., and Volker Schöppner. “Analysis and Optimization of the Dimensional Accuracy for FDM Parts Manufactured with ABS-M30.”https://www.researchgate.net/publication/283735736_Analysis_and_optimization_of_the_dimensional_accuracy_for_FDM_parts_manufactured_with_ABS-M30__ASPE Spring Topical Meeting, 2015, pp. 26–31, doi:https://www.researchgate.net/publication/283735736_Analysis_and_optimization_of_the_dimensional_accuracy_for_FDM_parts_manufactured_with_ABS-M30.
LibreCat: /record/22031
DOI: https://www.researchgate.net/publication/283735736_Analysis_and_optimization_of_the_dimensional_accuracy_for_FDM_parts_manufactured_with_ABS-M30

Knoop, F., and Volker Schöppner. “Mechanical and Thermal Properties of FDM Parts Manufactured with Polyamide 12.”http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-77-Knoop.pdf__26th Annual International Solid Freeform Fabrication Symposium, vol. 26, 2015, pp. 935–48, doi:http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-77-Knoop.pdf.
LibreCat: /record/22044
DOI: http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-77-Knoop.pdf

Rüsenberg, Stefan. Prozessqualifizierung zur verlässlichen Herstellung von Produkten im Polymer Lasersinterverfahren. Shaker Verlag GmbH, 2015.
LibreCat: /record/24751

Adam, Guido. Systematische Erarbeitung von Konstruktionsregeln Für Die Additiven Fertigungsverfahren Lasersintern, Laserschmelzen Und Fused Deposition Modeling. Shaker Verlag, 2015.
LibreCat: /record/22397

dell’Aere, Guido, and Detmar Zimmer. “On Design for Additive Manufacturing - Evaluating Geometrical Limitations.”10.1108/RPJ-06-2013-0060__Rapid Prototyping Journal, vol. 21, no. 6, Emerald Group Publishing Limited, 2015, pp. 662–70, doi:10.1108/RPJ-06-2013-0060.
LibreCat: /record/22394
DOI: 10.1108/RPJ-06-2013-0060

Lindemann, C., et al. Scenario Based Outlook of Additive Manufacturing Applications for the Aerospace Market. Metropolis Verlag, 2016.
LibreCat: /record/21698

Jahnke, U., and R. Koch. Prevention of Product Piracy - Potentials of Additive Manufacturing. Metropolis Verlag, 2016.
LibreCat: /record/21699

Brüggemann, J. P., et al. “Festigkeits- Und Leichtbauoptimierte Konstruktion Und Auslegung Eines Additiv Gefertigten Fahrradvorbaus.”10.3139/9783446450608.025__Rapid Tech - International Trade Show &; Conference for Additive Manufacturing, 2016, pp. 290–300, doi:10.3139/9783446450608.025.
LibreCat: /record/22107
DOI: 10.3139/9783446450608.025

Reschetnik, W., et al. Fatigue Life Manipulation of SLM Parts. 2016.
LibreCat: /record/22109

Brüggemann, J. P., et al. “Optimierung von Fahrradtretkurbeln Mittels Additiver Fertigung.” DVM - Tagung - Additiv Gefertigte Bauteile Und Strukturen, Deutscher Verband Für Materialforschung Und -Prüfung e.V., 2016, pp. 101–12.
LibreCat: /record/22128

Reschetnik, W., et al. “Lebensdauerbeeinflussung Durch Additive Fertigung.” DVM - Tagung - Additiv Gefertigte Bauteile Und Strukturen, Deutscher Verband Für Materialforschung Und -Prüfung e.V., 2016, pp. 131–40.
LibreCat: /record/22130

Riemer, A., et al. “Materialkennwerte Lasergeschmolzener Werkstoffe.” DVM - Tagung - Additiv Gefertigte Bauteile Und Strukturen, Deutscher Verband Für Materialforschung Und -Prüfung e.V., 2016, pp. 161–74.
LibreCat: /record/22132

Reschetnik, W., et al. “Fatigue Crack Growth Behavior and Mechanical Properties of Additively Processed EN AW-7075 Aluminium Alloy.” Procedia Structural Integrity, 2016, pp. 3040–48.
LibreCat: /record/22146

Riemer, A., and H. A. Richard. “Crack Propagation in Additive Manufactured Materials and Structures.” Procedia Structural Integrity, 2016, pp. 1229–36.
LibreCat: /record/22149

Josupeit, Stefan, et al. “Manufacturability and Mechanical Characterization of Laser Sintered Lattice Structures.”http://utw10945.utweb.utexas.edu/sites/default/files/2016/166-Josupeit.pdf__27th Annual International Solid Freeform Fabrication Symposium , vol. 27, 2016, pp. 2077–86, doi:http://utw10945.utweb.utexas.edu/sites/default/files/2016/166-Josupeit.pdf.
LibreCat: /record/22180
DOI: http://utw10945.utweb.utexas.edu/sites/default/files/2016/166-Josupeit.pdf

Delfs, Patrick, and Hans-Joachim Schmid. “Extended Analysis of the Surface Topography of Laser Sintered Polymer Parts .”https://www.bookshop.fraunhofer.de/buch/fraunhofer-direct-digital-manufacturing-conference-ddmc-2016/245111#__Fraunhofer Direct Digital Manufacturing Conference, vol. 3, 2016, pp. 411–14, doi:https://www.bookshop.fraunhofer.de/buch/fraunhofer-direct-digital-manufacturing-conference-ddmc-2016/245111#.
LibreCat: /record/22190
DOI: https://www.bookshop.fraunhofer.de/buch/fraunhofer-direct-digital-manufacturing-conference-ddmc-2016/245111#

Josupeit, Stefan, and Hans-Joachim Schmid. “Thermal Properties of Polyamide 12 Powder for Application in Laser Sintering.” International Congress on Particle Technology (PARTEC) , 2016.
LibreCat: /record/22194

Josupeit, Stefan, et al. “Dimensional Accuracy of Polymer Laser Sintered Parts: Influences and Measures.”10.3139/9783446450608.009__Rapid Tech - International Trade Show &; Conference for Additive Manufacturing , 2016, pp. 107–20, doi:10.3139/9783446450608.009.
LibreCat: /record/22200
DOI: 10.3139/9783446450608.009

Künneke, Thomas, and Detmar Zimmer. “Funktionsintegration Additiv Gefertigter Dämpfungsstrukturen Bei Biegeschwingungen.” DVM Tagung - Additiv Gefertigte Bauteile Und Strukturen, 2016, pp. 151–60.
LibreCat: /record/22403

Lammers, Stefan, et al. “Additive Manufacturing of a Lightweight Rotor for a Permanent Magnet Synchronous Machine.”10.1109/EDPC.2016.7851312__EDPC 2016, 2016, doi:10.1109/EDPC.2016.7851312.
LibreCat: /record/22404
DOI: 10.1109/EDPC.2016.7851312

Josupeit, Stefan, et al. “Influences on the Dimensional Accuracy of Laser Sintered Parts along the Process Chain.” 27th Annual International Solid Freeform Fabrication Symposium , 2016.
LibreCat: /record/22408

Lieneke, Tobias, et al. “Dimensional Tolerances for Additive Manufacturing: Experimental Investigation of Manufacturing Accuracy for Selective Laser Melting.” ASPE 2016 Summer Topical Meeting, 2016, p. S.9-15.
LibreCat: /record/22409

Knoop, Frederick, et al. “Reproducibility of the Dimensional Accuracy - Investigations for FDM.”10.3139/9783446454606.004__ASPE Spring Topical Meeting, 2016, p. S.3-8, doi:10.3139/9783446454606.004.
LibreCat: /record/22410
DOI: 10.3139/9783446454606.004

Knoop, Frederick, et al. “Reproducibility of the Dimensional Accuracy - Investigations for FDM.” Summer Topical Meeting 2016, 2016.
LibreCat: /record/22411

Lieneke, Tobias, et al. “Dimensional Tolerances for Additive Manufacturing: Experimental Investigation for Fused Deposition Modeling.”10.1016/j.procir.2016.02.361__CAT 2016, vol. 43, 2016, pp. 286–91, doi:10.1016/j.procir.2016.02.361.
LibreCat: /record/22412
DOI: 10.1016/j.procir.2016.02.361

Deppe, G., and R. Koch. “Supporting the Decision Process for Applying Additive Manufacturing in the MRO Aerospace Business by MADM.”http://utw10945.utweb.utexas.edu/sites/default/files/2016/006-Deppe.pdf__27th Annual International Solid Freeform Fabrication Symposium , vol. 27, 2016, pp. 81–92, doi:http://utw10945.utweb.utexas.edu/sites/default/files/2016/006-Deppe.pdf.
LibreCat: /record/21687
DOI: http://utw10945.utweb.utexas.edu/sites/default/files/2016/006-Deppe.pdf

Reiher, T., and R. Koch. “Product Optimization with and for Additive Manufacturing.”http://utw10945.utweb.utexas.edu/sites/default/files/2016/179-Reiher.pdf__27th Annual International Solid Freeform Fabrication Symposium , vol. 27, 2016, pp. 2236–49, doi:http://utw10945.utweb.utexas.edu/sites/default/files/2016/179-Reiher.pdf.
LibreCat: /record/21688
DOI: http://utw10945.utweb.utexas.edu/sites/default/files/2016/179-Reiher.pdf

Lindemann, C., and R. Koch. “Cost Efficient Design and Planning for Additive Manufacturing Technologies.”http://utw10945.utweb.utexas.edu/sites/default/files/2016/007-Lindemann.pdf__27th Annual International Solid Freeform Fabrication Symposium , vol. 27, 2016, pp. 93–112, doi:http://utw10945.utweb.utexas.edu/sites/default/files/2016/007-Lindemann.pdf.
LibreCat: /record/21689
DOI: http://utw10945.utweb.utexas.edu/sites/default/files/2016/007-Lindemann.pdf

Reiher, T., et al. “Combining Material Efficiency and Part Reliability by Product Optimization Applying Additive Manufacturing.”https://www.th-owl.de/elsa/download/333/334/PEM_2016_Proceeding_2016_09_14_Inhaltsnavigation.pdf__International Conference Production Engineering and Management 2016, vol. 6, 2016, pp. 27–38, doi:https://www.th-owl.de/elsa/download/333/334/PEM_2016_Proceeding_2016_09_14_Inhaltsnavigation.pdf.
LibreCat: /record/21702
DOI: https://www.th-owl.de/elsa/download/333/334/PEM_2016_Proceeding_2016_09_14_Inhaltsnavigation.pdf

Deppe, G., and R. Koch. “Unterstützung Des AM Entscheidungsprozesses in Der Luftfahrtersatzteilversorgung.”https://doi.org/10.3139/9783446450608.031__Rapid Tech 2016, vol. 13, Hanser Verlag, 2016, pp. 349–60, doi:https://doi.org/10.3139/9783446450608.031.
LibreCat: /record/21705
DOI: https://doi.org/10.3139/9783446450608.031

Gräßler, I., et al. “Data Management for Additive Manufacturing: Survey on Requirements and Current State.”https://www.designsociety.org/publication/38831/DATA+MANAGEMENT+FOR+ADDITIVE+MANUFACTURING%3A+SURVEY+ON+REQUIREMENTS+AND+CURRENT+STATE__14th International DESIGN Conference 2016, vol. 14, 2016, doi:https://www.designsociety.org/publication/38831/DATA+MANAGEMENT+FOR+ADDITIVE+MANUFACTURING%3A+SURVEY+ON+REQUIREMENTS+AND+CURRENT+STATE.
LibreCat: /record/21997
DOI: https://www.designsociety.org/publication/38831/DATA+MANAGEMENT+FOR+ADDITIVE+MANUFACTURING%3A+SURVEY+ON+REQUIREMENTS+AND+CURRENT+STATE

Fischer, M., and Volker Schöppner. “Fatigue Behavior of FDM Parts Manufactured with Ultem 9085.”10.1007/s11837-016-2197-2__27th Annual International Solid Freeform Fabrication Symposium , vol. 27, 2016, pp. 563–568, doi:10.1007/s11837-016-2197-2.
LibreCat: /record/22019
DOI: 10.1007/s11837-016-2197-2

Fischer, M., et al. “Chemical Surface Treatment of Ultem 9085 Parts.”10.3139/9783446450608.010__Rapid Tech - International Trade Show &; Conference for Additive Manufacturing, Carl Hanser Verlag GmbH &; Co. KG, 2016, pp. 121–33, doi:10.3139/9783446450608.010.
LibreCat: /record/22039
DOI: 10.3139/9783446450608.010