Beeinflussung des Risswachstums durch Kerben in additiv gefertigten Strukturen
W. Reschetnik, J.P. Brüggemann, G. Kullmer, L. Risse, Beeinflussung Des Risswachstums Durch Kerben in Additiv Gefertigten Strukturen, n.d.
LibreCat: /record/22111

Optimierung der Werkstoffperformance lasergeschmolzener metallischer Werkstoffe
A. Riemer, S. Leuders, H.A. Richard, G. Kullmer, Optimierung der Werkstoffperformance lasergeschmolzener metallischer Werkstoffe, n.d.
LibreCat: /record/22114

FDM Part Quality Manufactured with ULTEM 9085
A. Bagsik, V. Schöppner, E. Klemp, in: Proceedings of International Conference Polymeric Materials, 2010.
LibreCat: /record/22050
DOI: https://docplayer.net/255735-Fdm-part-quality-manufactured-with-ultem-9085.html

Konstruktionsregeln für additive Fertigung in Lehre und Forschung
G. Adam, D. Zimmer, Newsletter Berliner Kreis 15 (2010) 22–23.
LibreCat: /record/22355
DOI: https://www.researchgate.net/publication/274193188_Konstruktionsregeln_fur_additive_Fertigung_in_Lehre_und_Forschung 

Porosity as a key to increase material properties of laser sintered parts
S. Rüsenberg, L. Schmidt, H. Hosse, H.-J. Schmid, Porosity as a Key to Increase Material Properties of Laser Sintered Parts, 2011.
LibreCat: /record/22191
DOI: 10.1201/b11341

Direct Manufacturing Design Rules
G. Adam, D. Zimmer, Direct Manufacturing Design Rules, CRC Press, 2011.
LibreCat: /record/22358
DOI: 10.1201/b11341-88

Mechanical and Physical Properties - A Way to asses quality of Laser Sintered Parts
S. Rüsenberg, L. Schmidt, H.-J. Schmid, in: 22th Annual International Solid Freeform Fabrication Symposium, 2011, pp. 239–251.
LibreCat: /record/22188
DOI: http://utw10945.utweb.utexas.edu/Manuscripts/2011/2011-19-Ruesenberg.pdf

DMDR Direct Manufacturing Design Rules. Erarbeiten von applikationsunabhängigen Konstruktionsregeln
D. Zimmer, G. Adam, in: Rapid.Tech 2011 Fachmesse Und Anwendertagung Für Rapid-Technologie, 2011.
LibreCat: /record/22360

Mechanical Properties of Fused Deposition Modeling Parts Manufactured with ULTEM*9085
A. Bagsik, V. Schöppner, in: ANTEC, 2011, pp. 1294–1298.
LibreCat: /record/22029
DOI: https://www.researchgate.net/profile/Volker_Schoeppner/publication/284341800_Mechanical_properties_of_fused_deposition_modeling_parts_manufactured_with_ULTEMzast9085/links/5c73971b458515831f6cd501/Mechanical-properties-of-fused-deposition-modeling-parts-manufactured-with-ULTEM-zast9085.pdf

Controlling the Quality of Laser Sintered Parts Along the Process Chain
S. Rüsenberg, R. Weiffen, F. Knoop, H.-J. Schmid, in: 23rd Annual International Solid Freeform Fabrication Symposium, 2012, pp. 1024–1044.
LibreCat: /record/22174
DOI: http://utw10945.utweb.utexas.edu/Manuscripts/2012/2012-78-Ruesenberg.pdf

Mechanical Properties as a Result of multitude of Parameters
S. Rüsenberg, H.-J. Schmid, in: The European Forum on Additive Manufacturing, 2012.
LibreCat: /record/22204
DOI: https://afpr.asso.fr/content/assises/2012/actes/papiers/s5_2.pdf

Elementbasierte Erarbeitung von Konstruktionsregeln für additive Fertigung
G. Adam, D. Zimmer, in: 2012.
LibreCat: /record/22364

Analyzing Product Lifecycle Costs for a Better Understanding of Cost Drivers in Additve Manufacturing
C. Lindemann, U. Jahnke, M. Moi, R. Koch, in: 23rd Annual International Solid Freeform Fabrication Symposium, 2012, pp. 177–188.
LibreCat: /record/21680
DOI: http://utw10945.utweb.utexas.edu/Manuscripts/2012/2012-12-Lindemann.pdf

Long-Term ageing effects on Fused Deposition Modeling Parts manufactured with ULTEM*9085
A. Bagsik, V. Schöppner, E. Klemp, in: 23rd Annual International Solid Freeform Fabrication Symposium, 2012, pp. 629–640.
LibreCat: /record/22016
DOI: http://utw10945.utweb.utexas.edu/Manuscripts/2012/2012-48-Bagsik.pdf

Tensile and Flexural Properties of Fused Deposition Modeling Parts Manufactured with ULTEM*9085
A. Bagsik, V. Schöppner, E. Klemp, in: 1st International Conference on Thermo-Mechanically Graded Materials, 2012, pp. 129–134.
LibreCat: /record/22164

Extensive Analysis of the mechanical strength properties of Fused Deposition Modeling Parts manufactured with ULTEM 9085
A. Bagsik, V. Schöppner, E. Klemp, in: 5th International Conference on Polymer and Mould Innovations, Centre for Polymer and Material Technology, Univ. College, Ghent Univ., Ghent, 2012, pp. 266–272.
LibreCat: /record/22024
DOI: https://www.tib.eu/de/suchen/id/TIBKAT%3A756276616

A material-based quality concept for polymer laser sintering
S. Josupeit, S. Rüsenberg, H.-J. Schmid, in: 24th Annual International Solid Freeform Fabrication Symposium , 2013, pp. 44–54.
LibreCat: /record/22175
DOI: http://utw10945.utweb.utexas.edu/Manuscripts/2013/2013-03-Josupeit.pdf

Advanced characterization method of Nylon 12 materials for application in laser sinter processing
S. Rüsenberg, H.-J. Schmid, in: International Conference of the Polymer-Processing-Society (PPS), 2013.
LibreCat: /record/22192
DOI: 10.1063/1.4873877

Mechanische und rheologische Untersuchungen neuer Laser Sinter Materialien
S. Josupeit, S. Rüsenberg, H.-J. Schmid, in: Merseburger Rapid Prototyping Forum, 2013.
LibreCat: /record/22197
DOI: https://www.rp-netzwerk.de/images/stories/pdf/rapid_7/Universitaet_Paderborn_DMRC_RP-Forum2013.pdf

Additiv versus Konventionell: Benchmarking am Beispiel eines Designs aus der Luftfahrtindustrie
S. Rüsenberg, A. Bagsik, J. Büsching, H.-J. Schmid, in: RapidTech, 2013.
LibreCat: /record/22201

Design for additive manufacturing
G. Adam, D. Zimmer, in: 2013.
LibreCat: /record/22373

Die Potentiale additiver Fertigung nutzen
G. Adam, in: 2013.
LibreCat: /record/22375

Konstruktionsregeln für additive Fertigungsverfahren - Ausbildung, Lehre
G. Adam, in: 2013.
LibreCat: /record/22376

Impact and Influence Factors of Additive Manufacturing on Product Lifecycle Costs
C. Lindemann, U. Jahnke, M. Moi, R. Koch, in: 24th Annual International Solid Freeform Fabrication Symposium, 2013, pp. 998–1008.
LibreCat: /record/21682
DOI: http://utw10945.utweb.utexas.edu/Manuscripts/2013/2013-79-Lindemann.pdf

Some Investigations Regarding the Surface Treatment of Ultem 9085 Parts Manufactured with Fused Deposition Modeling
M. Fischer, V. Schöppner, in: 24th Annual International Solid Freeform Fabrication Symposium, 2013, pp. 805–815.
LibreCat: /record/22017
DOI: http://utw10945.utweb.utexas.edu/Manuscripts/2013/2013-64-Fischer.pdf

Qualitätsmanagement in der zivilen Gefahrenabwehr : Optimierung von Führungsprozessen durch interaktive SOPs 
T. Becker, Qualitätsmanagement in Der Zivilen Gefahrenabwehrf: Optimierung von Führungsprozessen Durch Interaktive SOPs , 2013.
LibreCat: /record/42097

Konstruktionsregeln für additive Fertigungsverfahren 
G. Adam, D. Zimmer, Konstruktion 7 (2013) 77–82.
LibreCat: /record/22374
DOI: https://www.researchgate.net/publication/274190643_Konstruktionsregeln_fur_additive_Fertigungsverfahren 

Simulation of the Surface Topography on Laser Sintered Polymer Parts
P. Delfs, A.A. Herale, Z. Li, H.-J. Schmid, in: 25th Annual International Solid Freeform Fabrication Symposium, 2014, pp. 1250–1258.
LibreCat: /record/22176
DOI: http://utw10945.utweb.utexas.edu/sites/default/files/2014-098-Delfs.pdf

Three-dimensional in-process temperature measurement of laser sintered part cakes
S. Josupeit, H.-J. Schmid, in: 25th Annual International Solid Freeform Fabrication Symposium, 2014, pp. 49–58.
LibreCat: /record/22177
DOI: http://utw10945.utweb.utexas.edu/sites/default/files/2014-006-Josupeit.pdf

Thermal ageing of polyamide 12 used for polymer laser sintering - influence on part quality characteristics
S. Josupeit, S. Rüsenberg, N. Rupp, M. Gessler, H.-J. Schmid, in: 72nd Annual Technical Conference of the Society of Plastics Engineers (ANTEC 2014), 2014, pp. 2383–2385.
LibreCat: /record/22184
DOI: https://www.researchgate.net/publication/283135483_Thermal_ageing_of_polyamide_12_used_for_polymer_laser_sintering_-_Influence_on_part_quality_characteristics

Development of a Basic Model to Simulate the Laser Sintering Cooling Process
S. Josupeit, L. Ordia, H.-J. Schmid, in: International Conference on Additive Technologies, 2014, pp. 222–227.
LibreCat: /record/22193
DOI: https://www.researchgate.net/profile/Saeed_Khademzadeh2/publication/303022441_Geometrical_characterization_of_thin_walls_produced_by_micro_laser_sintering/links/5735cc7f08ae298602e08f1f/Geometrical-characterization-of-thin-walls-produced-by-micro-laser-sintering.pdf

Simulation of the Surface Topography on Laser Sintered Polymer Parts
P. Delfs, H.-J. Schmid, in: 25th Annual International Solid Freeform Fabrication Symposium, 2014, pp. 1250–1258.
LibreCat: /record/22203
DOI: http://utw10945.utweb.utexas.edu/sites/default/files/2014-098-Delfs.pdf

Extension of prior developed design rules (LS)
G. Adam, D. Zimmer, in: ASPE - Spring Topical Meeting 2014, 2014.
LibreCat: /record/22382
DOI: https://www.researchgate.net/publication/274193378_Extension_of_prior_developed_design_rules%27_range_of_validity_for_different_boundary_conditions_in_laser_sintering 

Systematic investigations of minimum feature sizes and geometrical accuracies
G. Adam, D. Zimmer, in: 2014.
LibreCat: /record/22383

Erweiterung des Gültigkeitsbereichs von Konstruktionsregeln beim Lasersintern
G. Adam, in: 2014.
LibreCat: /record/22385

Extension of prior developed design rules for laser sintering
G. Adam, in: 2014.
LibreCat: /record/22386

Finishing of ABS-M30 Parts Manufactured with Fused Deposition Modeling with Focus on Dimensional Accuracy
M. Fischer, V. Schöppner, in: 25th Annual International Solid Freeform Fabrication Symposium, 2014, pp. 923–934.
LibreCat: /record/22018
DOI: http://utw10945.utweb.utexas.edu/sites/default/files/2014-073-Fischer.pdf

Effects of a mass finishing process on parts produced from Ultem 9085 by Fused Deposition Modeling
M. Fischer, V. Schöppner, in: ANTEC, SPE: Society of Plastics Engineers, 2014, pp. 2331–2336.
LibreCat: /record/22030

Mechanical Analysis of Lightweight Constructions manufactured with Fused Deposition Modeling
A. Bagsik, S. Josupeit, V. Schöppner, E. Klemp, in: 29th International Conference of the Polymer Processing Society, American Institute of Physics , 2014, pp. 696–701.
LibreCat: /record/22021
DOI: 10.1063/1.4873874

A method to characterize the quality of a polymer laser sintering process 
S. Rüsenberg, S. Josupeit, H.-J. Schmid, Advances in Mechanical Engineering 6 (2014) 1687–8140.
LibreCat: /record/22186
DOI: 10.1155/2014/185374

Design for Additive Manufacturing - Element transitions and aggregated structures
G. Adam, D. Zimmer, CIRP Journal of Manufacturing Science and Technology 7 (2014) 20–28.
LibreCat: /record/22384
DOI: 10.1016/j.cirpj.2013.10.001 

Exploring the influence of an Additive Manufacturing integration on future MRO processes in aeronautics
G. Deppe, R. Koch, Rtejournal 2014 (2014).
LibreCat: /record/21706
DOI: https://www.rtejournal.de/ausgabe11/3958

On the fatigue properties of metals manufactured by selective laser melting – The role of ductility
S. Leuders, T. Lieneke, S. Lammers, T. Tröster, T. Niendorf, Journal of Materials Research (2014) 1911–1919.
LibreCat: /record/15965
DOI: 10.1557/jmr.2014.157

Einsatz additiver Fertigung zur Optimierung des Ermüdungsverhaltens von gekerbten Strukturen
W. Reschetnik, A. Riemer, H.A. Richard, in: DVM - Tagung - Additiv Gefertigte Bauteile Und Strukturen, Deutscher Verband Für Materialforschung Und -Prüfung e.V., 2015, pp. 63–72.
LibreCat: /record/22108

Industrial applications in AM - aerospace and overhaul
E. Klemp, in: ASME AM3D Conference and Expo, 2015.
LibreCat: /record/22166

Paradigmenwechsel mit Additiven Fertigungsverfahren - Möglichkeiten und Chancen
E. Klemp, in: Generatives Fertigen Und 3D-Drucken: Industrielle Revolution Oder Hype? Wissenschaftliches Kolloquium, 2015.
LibreCat: /record/22168

Möglichkeiten, Chancen und Mythen additiver Fertigung
E. Klemp, in: Hanse-Aerospace-Themennachmittag Im Hause SLM, 2015.
LibreCat: /record/22169

Additive Manufacturing - Potenziale, Zukunftschancen und Hürden
E. Klemp, in: Messe Interzum, 2015.
LibreCat: /record/22170

Technology Update 2015 for Metals
E. Klemp, in: SLM-Usermeeting, 2015.
LibreCat: /record/22171

AM-Verfahren - Möglichkeiten in der industriellen Fertigung
E. Klemp, in: VDMA - Symposium Auf Der Hannover Messe Industrie, 2015.
LibreCat: /record/22172