Beeinflussung des Risswachstums durch Kerben in additiv gefertigten Strukturen
W. Reschetnik, J.P. Brüggemann, G. Kullmer, L. Risse, Beeinflussung Des Risswachstums Durch Kerben in Additiv Gefertigten Strukturen, n.d.

Optimierung der Werkstoffperformance lasergeschmolzener metallischer Werkstoffe
A. Riemer, S. Leuders, H.A. Richard, G. Kullmer, Optimierung der Werkstoffperformance lasergeschmolzener metallischer Werkstoffe, n.d.

FDM Part Quality Manufactured with ULTEM 9085
A. Bagsik, V. Schöppner, E. Klemp, in: Proceedings of International Conference Polymeric Materials, 2010.

Konstruktionsregeln für additive Fertigung in Lehre und Forschung
G. Adam, D. Zimmer, Newsletter Berliner Kreis 15 (2010) 22–23.

Porosity as a key to increase material properties of laser sintered parts
S. Rüsenberg, L. Schmidt, H. Hosse, H.-J. Schmid, Porosity as a Key to Increase Material Properties of Laser Sintered Parts, 2011.

Direct Manufacturing Design Rules
G. Adam, D. Zimmer, Direct Manufacturing Design Rules, CRC Press, 2011.

Mechanical and Physical Properties - A Way to asses quality of Laser Sintered Parts
S. Rüsenberg, L. Schmidt, H.-J. Schmid, in: 22th Annual International Solid Freeform Fabrication Symposium, 2011, pp. 239–251.

DMDR Direct Manufacturing Design Rules. Erarbeiten von applikationsunabhängigen Konstruktionsregeln
D. Zimmer, G. Adam, in: Rapid.Tech 2011 Fachmesse Und Anwendertagung Für Rapid-Technologie, 2011.

Mechanical Properties of Fused Deposition Modeling Parts Manufactured with ULTEM*9085
A. Bagsik, V. Schöppner, in: ANTEC, 2011, pp. 1294–1298.

Controlling the Quality of Laser Sintered Parts Along the Process Chain
S. Rüsenberg, R. Weiffen, F. Knoop, H.-J. Schmid, in: 23rd Annual International Solid Freeform Fabrication Symposium, 2012, pp. 1024–1044.

Mechanical Properties as a Result of multitude of Parameters
S. Rüsenberg, H.-J. Schmid, in: The European Forum on Additive Manufacturing, 2012.

Elementbasierte Erarbeitung von Konstruktionsregeln für additive Fertigung
G. Adam, D. Zimmer, in: 2012.

Analyzing Product Lifecycle Costs for a Better Understanding of Cost Drivers in Additve Manufacturing
C. Lindemann, U. Jahnke, M. Moi, R. Koch, in: 23rd Annual International Solid Freeform Fabrication Symposium, 2012, pp. 177–188.

Long-Term ageing effects on Fused Deposition Modeling Parts manufactured with ULTEM*9085
A. Bagsik, V. Schöppner, E. Klemp, in: 23rd Annual International Solid Freeform Fabrication Symposium, 2012, pp. 629–640.

Tensile and Flexural Properties of Fused Deposition Modeling Parts Manufactured with ULTEM*9085
A. Bagsik, V. Schöppner, E. Klemp, in: 1st International Conference on Thermo-Mechanically Graded Materials, 2012, pp. 129–134.

Extensive Analysis of the mechanical strength properties of Fused Deposition Modeling Parts manufactured with ULTEM 9085
A. Bagsik, V. Schöppner, E. Klemp, in: 5th International Conference on Polymer and Mould Innovations, Centre for Polymer and Material Technology, Univ. College, Ghent Univ., Ghent, 2012, pp. 266–272.

A material-based quality concept for polymer laser sintering
S. Josupeit, S. Rüsenberg, H.-J. Schmid, in: 24th Annual International Solid Freeform Fabrication Symposium , 2013, pp. 44–54.

Advanced characterization method of Nylon 12 materials for application in laser sinter processing
S. Rüsenberg, H.-J. Schmid, in: International Conference of the Polymer-Processing-Society (PPS), 2013.

Mechanische und rheologische Untersuchungen neuer Laser Sinter Materialien
S. Josupeit, S. Rüsenberg, H.-J. Schmid, in: Merseburger Rapid Prototyping Forum, 2013.

Additiv versus Konventionell: Benchmarking am Beispiel eines Designs aus der Luftfahrtindustrie
S. Rüsenberg, A. Bagsik, J. Büsching, H.-J. Schmid, in: RapidTech, 2013.

Design for additive manufacturing
G. Adam, D. Zimmer, in: 2013.

Die Potentiale additiver Fertigung nutzen
G. Adam, in: 2013.

Konstruktionsregeln für additive Fertigungsverfahren - Ausbildung, Lehre
G. Adam, in: 2013.

Impact and Influence Factors of Additive Manufacturing on Product Lifecycle Costs
C. Lindemann, U. Jahnke, M. Moi, R. Koch, in: 24th Annual International Solid Freeform Fabrication Symposium, 2013, pp. 998–1008.

Some Investigations Regarding the Surface Treatment of Ultem 9085 Parts Manufactured with Fused Deposition Modeling
M. Fischer, V. Schöppner, in: 24th Annual International Solid Freeform Fabrication Symposium, 2013, pp. 805–815.

Qualitätsmanagement in der zivilen Gefahrenabwehr : Optimierung von Führungsprozessen durch interaktive SOPs 
T. Becker, Qualitätsmanagement in Der Zivilen Gefahrenabwehrf: Optimierung von Führungsprozessen Durch Interaktive SOPs , 2013.

Konstruktionsregeln für additive Fertigungsverfahren 
G. Adam, D. Zimmer, Konstruktion 7 (2013) 77–82.

Simulation of the Surface Topography on Laser Sintered Polymer Parts
P. Delfs, A.A. Herale, Z. Li, H.-J. Schmid, in: 25th Annual International Solid Freeform Fabrication Symposium, 2014, pp. 1250–1258.

Three-dimensional in-process temperature measurement of laser sintered part cakes
S. Josupeit, H.-J. Schmid, in: 25th Annual International Solid Freeform Fabrication Symposium, 2014, pp. 49–58.

Thermal ageing of polyamide 12 used for polymer laser sintering - influence on part quality characteristics
S. Josupeit, S. Rüsenberg, N. Rupp, M. Gessler, H.-J. Schmid, in: 72nd Annual Technical Conference of the Society of Plastics Engineers (ANTEC 2014), 2014, pp. 2383–2385.

Development of a Basic Model to Simulate the Laser Sintering Cooling Process
S. Josupeit, L. Ordia, H.-J. Schmid, in: International Conference on Additive Technologies, 2014, pp. 222–227.

Simulation of the Surface Topography on Laser Sintered Polymer Parts
P. Delfs, H.-J. Schmid, in: 25th Annual International Solid Freeform Fabrication Symposium, 2014, pp. 1250–1258.

Extension of prior developed design rules (LS)
G. Adam, D. Zimmer, in: ASPE - Spring Topical Meeting 2014, 2014.

Systematic investigations of minimum feature sizes and geometrical accuracies
G. Adam, D. Zimmer, in: 2014.

Erweiterung des Gültigkeitsbereichs von Konstruktionsregeln beim Lasersintern
G. Adam, in: 2014.

Extension of prior developed design rules for laser sintering
G. Adam, in: 2014.

Finishing of ABS-M30 Parts Manufactured with Fused Deposition Modeling with Focus on Dimensional Accuracy
M. Fischer, V. Schöppner, in: 25th Annual International Solid Freeform Fabrication Symposium, 2014, pp. 923–934.

Effects of a mass finishing process on parts produced from Ultem 9085 by Fused Deposition Modeling
M. Fischer, V. Schöppner, in: ANTEC, SPE: Society of Plastics Engineers, 2014, pp. 2331–2336.

Mechanical Analysis of Lightweight Constructions manufactured with Fused Deposition Modeling
A. Bagsik, S. Josupeit, V. Schöppner, E. Klemp, in: 29th International Conference of the Polymer Processing Society, American Institute of Physics , 2014, pp. 696–701.

A method to characterize the quality of a polymer laser sintering process 
S. Rüsenberg, S. Josupeit, H.-J. Schmid, Advances in Mechanical Engineering 6 (2014) 1687–8140.

Design for Additive Manufacturing - Element transitions and aggregated structures
G. Adam, D. Zimmer, CIRP Journal of Manufacturing Science and Technology 7 (2014) 20–28.

Exploring the influence of an Additive Manufacturing integration on future MRO processes in aeronautics
G. Deppe, R. Koch, Rtejournal 2014 (2014).

On the fatigue properties of metals manufactured by selective laser melting – The role of ductility
S. Leuders, T. Lieneke, S. Lammers, T. Tröster, T. Niendorf, Journal of Materials Research (2014) 1911–1919.

Einsatz additiver Fertigung zur Optimierung des Ermüdungsverhaltens von gekerbten Strukturen
W. Reschetnik, A. Riemer, H.A. Richard, in: DVM - Tagung - Additiv Gefertigte Bauteile Und Strukturen, Deutscher Verband Für Materialforschung Und -Prüfung e.V., 2015, pp. 63–72.

Industrial applications in AM - aerospace and overhaul
E. Klemp, in: ASME AM3D Conference and Expo, 2015.

Paradigmenwechsel mit Additiven Fertigungsverfahren - Möglichkeiten und Chancen
E. Klemp, in: Generatives Fertigen Und 3D-Drucken: Industrielle Revolution Oder Hype? Wissenschaftliches Kolloquium, 2015.

Möglichkeiten, Chancen und Mythen additiver Fertigung
E. Klemp, in: Hanse-Aerospace-Themennachmittag Im Hause SLM, 2015.

Additive Manufacturing - Potenziale, Zukunftschancen und Hürden
E. Klemp, in: Messe Interzum, 2015.

Technology Update 2015 for Metals
E. Klemp, in: SLM-Usermeeting, 2015.

AM-Verfahren - Möglichkeiten in der industriellen Fertigung
E. Klemp, in: VDMA - Symposium Auf Der Hannover Messe Industrie, 2015.

Mass finishing of laser sintered parts
P. Delfs, Z. Li, H.-J. Schmid, in: 26th Annual International Solid Freeform Fabrication Symposium, 2015, pp. 514–526.

Temperature History within Laser Sintered Part Cakes and its Influence on Process Quality
S. Josupeit, H.-J. Schmid, in: 26th Annual International Solid Freeform Fabrication Symposium, 2015, pp. 190–199.

Material Properties of Laser Sintered Polyamide 12 as Function of Build Cycles Using Low Refresh Rates
S. Josupeit, J. Lohn, E. Hermann, M. Gessler, S. Tenbrink, H.-J. Schmid, in: 26th Annual International Solid Freeform Fabrication Symposium, 2015, pp. 540–549.

Surface roughness optimized alignment of parts for additive manufacturing processes
P. Delfs, M. Toews, H.-J. Schmid, in: 26th Annual International Solid Freeform Fabrication Symposium, 2015, pp. 1334–1344.

Powder ageing and material properties of laser sintered polyamide 12 using low refresh rates
S. Josupeit, S. Tutzschky, M. Gessler, H.-J. Schmid, in: Proceedings of the Rapid Tech 2015, Springer Vieweg, 2015, pp. 63–78.

Entwicklung einer Methode zur systematischen Erarbeitung von Maßtoleranzen für additive Fertigungsverfahren
T. Lieneke, G. Adam, S. Leuders, F. Knoop, S. Josupeit, P. Delfs, N. Funke, D. Zimmer, in: Proceedings of the Rapid Tech 2015, 2015.

Systematical determination of tolerances for additive manufacturing by measuring linear dimensions
T. Lieneke, G. Adam, S. Leuders, F. Knoop, S. Josupeit, P. Delfs, N. Funke, D. Zimmer, in: 26th Annual International Solid Freeform Fabrication Symposium, 2015, pp. 371–384.

On tolerances for additive manufacturing
G. Adam, in: Inside 3D Printing Conference and Expo, 2015.

Entwicklung einer Methode zur systematischen Erarbeitung von Maßtoleranzen für additive Fertigungsverfahren
T. Lieneke, in: Rapid Tech 2015, 2015.

Systematical determination of dimensional tolerances for additive manufacturing 
T. Lieneke, in: 26th Annual International Solid Freeform Fabrication Symposium, 2015.

Towards a sustainable and economic selection of part candidates for Additive Manufacturing
C. Lindemann, U. Jahnke, T. Reiher, R. Koch, in: Rapid Prototyping Journal, Emerald, 2015, pp. 216–227.

Developement of an economic decision support for the application of Additive Manufacturing in aerospace
G. Deppe, C. Lindemann, R. Koch, in: 26th Annual International Solid Freeform Fabrication Symposium, 2015, pp. 1560–1563.

Protection measures against product piracy and application by the use of AM
U. Jahnke, J. Büsching, T. Reiher, R. Koch, in: 26th Annual International Solid Freeform Fabrication Symposium, 2015, pp. 1601–1611.

FE-Optimization and data handling for Additive Manufacturing of structural parts
T. Reiher, R. Koch, in: 26th Annual International Solid Freeform Fabrication Symposium, 2015, pp. 1092–1103.

Sustainable Part Selection for the Use of Additive Manufacturing in Companies Focussing on Prevention of Product Piracy
U. Jahnke, C. Lindemann, in: Inside 3D Printing Conference and Expo, 2015.

Exploring the cost and lifetime benefits of a topology optimized aerospace part applying additive manufacturing
G. Deppe, T. Reiher, R. Koch, in: International Conference Production Engineering and Management 2015, 2015, pp. 219–230.

Guidelines for a sustainable and economic selection of part candidates for space applications using additive manufacturing
C. Lindemann, T. Reiher, R. Koch, in: Paris Space Week, 2015.

Analysis and Optimization of the Dimensional Accuracy for FDM Parts manufactured with ABS-M30
F. Knoop, V. Schöppner, in: ASPE Spring Topical Meeting, 2015, pp. 26–31.

Mechanical and Thermal Properties of FDM Parts manufactured with Polyamide 12
F. Knoop, V. Schöppner, in: 26th Annual International Solid Freeform Fabrication Symposium, 2015, pp. 935–948.

Prozessqualifizierung zur verlässlichen Herstellung von Produkten im Polymer Lasersinterverfahren
S. Rüsenberg, Prozessqualifizierung zur verlässlichen Herstellung von Produkten im Polymer Lasersinterverfahren, Shaker Verlag GmbH, Düren, 2015.

Systematische Erarbeitung von Konstruktionsregeln für die additiven Fertigungsverfahren Lasersintern, Laserschmelzen und Fused Deposition Modeling
G. Adam, Systematische Erarbeitung von Konstruktionsregeln Für Die Additiven Fertigungsverfahren Lasersintern, Laserschmelzen Und Fused Deposition Modeling, Shaker Verlag, 2015.

On design for Additive Manufacturing - evaluating geometrical limitations
G. dell’Aere, D. Zimmer, Rapid Prototyping Journal 21 (2015) 662–670.

Scenario Based Outlook of Additive Manufacturing Applications for the Aerospace Market
C. Lindemann, G. Deppe, R. Koch, Scenario Based Outlook of Additive Manufacturing Applications for the Aerospace Market, Metropolis Verlag, 2016.

Prevention of Product Piracy - Potentials of Additive Manufacturing
U. Jahnke, R. Koch, Prevention of Product Piracy - Potentials of Additive Manufacturing, Metropolis Verlag, 2016.

Festigkeits- und leichtbauoptimierte Konstruktion und Auslegung eines additiv gefertigten Fahrradvorbaus
J.P. Brüggemann, W. Reschetnik, H.A. Richard, G. Kullmer, B. Schramm, in: Rapid Tech - International Trade Show &; Conference for Additive Manufacturing, 2016, pp. 290–300.

Fatigue Life Manipulation of SLM Parts
W. Reschetnik, R. Grylls, B. Bauer, H.A. Richard, G. Kullmer, in: 2016.

Optimierung von Fahrradtretkurbeln mittels additiver Fertigung
J.P. Brüggemann, A. Riemer, W. Reschetnik, M.E. Aydinöz, G. Kullmer, H.A. Richard, M. Schaper, in: DVM - Tagung - Additiv Gefertigte Bauteile Und Strukturen, Deutscher Verband Für Materialforschung Und -Prüfung e.V., 2016, pp. 101–112.

Lebensdauerbeeinflussung durch Additive Fertigung
W. Reschetnik, J.P. Brüggemann, M.E. Aydinöz, G. Kullmer, H.A. Richard, M. Schaper, in: DVM - Tagung - Additiv Gefertigte Bauteile Und Strukturen, Deutscher Verband Für Materialforschung Und -Prüfung e.V., 2016, pp. 131–140.

Materialkennwerte lasergeschmolzener Werkstoffe
A. Riemer, L. Leuders, G. Kullmer, H.A. Richard, in: DVM - Tagung - Additiv Gefertigte Bauteile Und Strukturen, Deutscher Verband Für Materialforschung Und -Prüfung e.V., 2016, pp. 161–174.

Fatigue crack growth behavior and mechanical properties of additively processed EN AW-7075 aluminium alloy
W. Reschetnik, J.P. Brüggemann, M.E. Aydinöz, O. Grydin, K.P. Hoyer, G. Kullmer, H.A. Richard, in: Procedia Structural Integrity, 2016, pp. 3040–3048.

Crack Propagation in Additive Manufactured Materials and Structures
A. Riemer, H.A. Richard, in: Procedia Structural Integrity, 2016, pp. 1229–1236.

Manufacturability and Mechanical Characterization of Laser Sintered Lattice Structures
S. Josupeit, P. Delfs, D. Menge, H.-J. Schmid, in: 27th Annual International Solid Freeform Fabrication Symposium , 2016, pp. 2077–2086.

Extended Analysis of the Surface Topography of Laser Sintered Polymer Parts 
P. Delfs, H.-J. Schmid, in: Fraunhofer Direct Digital Manufacturing Conference, 2016, pp. 411–414.

Thermal properties of polyamide 12 powder for application in laser sintering
S. Josupeit, H.-J. Schmid, in: International Congress on Particle Technology (PARTEC) , 2016.

Dimensional accuracy of polymer laser sintered parts: Influences and measures
S. Josupeit, P. Delfs, T. Lieneke, G. Adam, M. Gessler, H. Pfisterer, H.-J. Schmid, in: Rapid Tech - International Trade Show &; Conference for Additive Manufacturing , 2016, pp. 107–120.

Funktionsintegration additiv gefertigter Dämpfungsstrukturen bei Biegeschwingungen
T. Künneke, D. Zimmer, in: DVM Tagung - Additiv Gefertigte Bauteile Und Strukturen, 2016, pp. 151–160.

Additive Manufacturing of a Lightweight Rotor for a Permanent Magnet Synchronous Machine
S. Lammers, G. Adam, H.-J. Schmid, R. Mrozek, R. Oberacker, M. Hoffmann, F. Quattrone, B. Ponick, in: EDPC 2016, 2016.

Influences on the dimensional Accuracy of Laser Sintered Parts along the Process Chain
S. Josupeit, P. Delfs, T. Lieneke, H.-J. Schmid, in: 27th Annual International Solid Freeform Fabrication Symposium , 2016.

Dimensional tolerances for additive manufacturing: Experimental investigation of manufacturing accuracy for selective laser melting
T. Lieneke, S. de Groot, G. Adam, D. Zimmer, in: ASPE 2016 Summer Topical Meeting, 2016, p. S.9-15.

Reproducibility of the Dimensional Accuracy - Investigations for FDM
F. Knoop, T. Lieneke, V. Schoeppner, in: ASPE Spring Topical Meeting, 2016, p. S.3-8.

Reproducibility of the Dimensional Accuracy - Investigations for FDM
F. Knoop, T. Lieneke, V. Schoeppner, in: Summer Topical Meeting 2016, 2016.

Dimensional tolerances for additive manufacturing: Experimental investigation for Fused Deposition Modeling
T. Lieneke, V. Denzer, G. Adam, D. Zimmer, in: CAT 2016, 2016, pp. 286–291.

Supporting the Decision Process for applying Additive Manufacturing in the MRO Aerospace Business by MADM
G. Deppe, R. Koch, in: 27th Annual International Solid Freeform Fabrication Symposium , 2016, pp. 81–92.

Product optimization with and for Additive Manufacturing
T. Reiher, R. Koch, in: 27th Annual International Solid Freeform Fabrication Symposium , 2016, pp. 2236–2249.

Cost Efficient Design and Planning for Additive Manufacturing Technologies
C. Lindemann, R. Koch, in: 27th Annual International Solid Freeform Fabrication Symposium , 2016, pp. 93–112.

Combining material efficiency and part reliability by product optimization applying additive manufacturing
T. Reiher, G. Deppe, R. Koch, in: International Conference Production Engineering and Management 2016, 2016, pp. 27–38.

Unterstützung des AM Entscheidungsprozesses in der Luftfahrtersatzteilversorgung
G. Deppe, R. Koch, in: Rapid Tech 2016, Hanser Verlag, 2016, pp. 349–360.

Data Management for additive manufacturing: survey on requirements and current state
I. Gräßler, P. Taplick, J. Pottebaum, P. Scholle, T. Reiher, in: 14th International DESIGN Conference 2016, 2016.

Fatigue Behavior of FDM Parts Manufactured with Ultem 9085
M. Fischer, V. Schöppner, in: 27th Annual International Solid Freeform Fabrication Symposium , 2016, pp. 563–568.

Chemical Surface Treatment of Ultem 9085 Parts
M. Fischer, O. Seewald, V. Schöppner, in: Rapid Tech - International Trade Show &; Conference for Additive Manufacturing, Carl Hanser Verlag GmbH &; Co. KG, 2016, pp. 121–133.