Moritzer, E., &; Elsner, C. L. (2024). Evaluation of the Influence of Particle Type, Shape and Size on the Thermal Conductivity of Filled Polymers in the Fused Filament Fabrication Process. Annual Technical Conference of the Society of Plastics Engineers (ANTEC 2024), St. Louis.
LibreCat: /record/53529

Rüther, M. J., Klippstein, S. H., Ponusamy, S., Rüther, T., &; Schmid, H.-J. (2023). Flowability of polymer powders at elevated temperatures for additive manufacturing. Powder Technology, 422, Article 118460.https://doi.org/10.1016/j.powtec.2023.118460 
LibreCat: /record/43128
DOI: 10.1016/j.powtec.2023.118460

Haase, M., Bieber, M., Tasche, F., Schaper, M., Hoyer, K.-P., Ponik, B., &; Magyar, B. (2023). Umsetzung einer optimierten Oberflächenschlitzung zur Wirbelstromverlustreduktion auf der Oberfläche eines additiv gefertigten Permanentmagnet-Rotors. In M. Kynast, M. Eichmann, &; G. Witt (Eds.), Proceedings of the 19th Rapid.Tech 3D Conference Erfurt, Germany, 9–11 May 2023. Carl Hanser Verlag GmbH &; Co. KG.
LibreCat: /record/45360

Andreiev, A., Hoyer, K.-P., Hengsbach, F., Haase, M., Tasche, L., Duschik, K., &; Schaper, M. (2023). Powder bed fusion of soft-magnetic iron-based alloys with high silicon content. Journal of Materials Processing Technology, 317, Article 117991.https://doi.org/10.1016/j.jmatprotec.2023.117991 
LibreCat: /record/44078
DOI: 10.1016/j.jmatprotec.2023.117991

Kletetzka, I., Kosanke, M., Meinderink, D., Neßlinger, V., Grundmeier, G., &; Schmid, H.-J. (2023). Influence of the filler–matrix adhesion and the effects of conditioning on tensile properties of laser-sintered parts built with polyamide–glass bead dry blends. Progress in Additive Manufacturing.https://doi.org/10.1007/s40964-023-00501-z 
LibreCat: /record/46815
DOI: 10.1007/s40964-023-00501-z

Klippstein, S. H., Kletetzka, I., Sural, I., &; Schmid, H.-J. (2023). Influence of a prolonged shelf time on P laser sintering powder and resulting part properties. The International Journal of Advanced Manufacturing Technology .https://doi.org/10.1007/s00170-023-11243-1 
LibreCat: /record/43046
DOI: https://doi.org/10.1007/s00170-023-11243-1

Kletetzka, I., Neitzel, F., &; Schmid, H.-J. (2023). Assessing the Impact of the Powder Production Method on Ceramic-filled Polyamide Composites made by Laser Sintering. In J. Beaman (Ed.), Proceedings of the 34th Annual International Solid Freeform Fabrication Symposium (Vol. 34). Laboratory for Freeform Fabrication and University of Texas.
LibreCat: /record/46764

Koers, T., &; Magyar, B. (2023). Compensation of the Shrinkage Behavior Occurring in Cylindrical Components in the FDM Process. In G. Lamanna &; C. Opran (Eds.), Macromolecular Symposia (Vol. 411, Issue 1). Wiley.https://doi.org/10.1002/masy.202200185 
LibreCat: /record/48095
DOI: https://doi.org/10.1002/masy.202200185

Bieber, M., Haase, M., Tasche, F., Zibart, A., &; Ponick, B. (2023). Additively manufactured air-cooled lightweight rotor for an automotive electric motor. 2023 IEEE International Electric Machines &;amp; Drives Conference (IEMDC).https://doi.org/10.1109/iemdc55163.2023.10238918 
LibreCat: /record/49774
DOI: 10.1109/iemdc55163.2023.10238918

Bödger, C., Gnaase, S., Lehnert, D., &; Tröster, T. (2023). Investigation of the influence of process parameters on productivity in the LPBF process for the material Inconel 718. Proceedings of the 34th Annual International Solid Freeform Fabrication Symposium – An Additive Manufacturing Conference. Solid Freeform Fabrication, Austin.
LibreCat: /record/50742

Moritzer, E., &; Hecker, F. (2023). Adaptive Scaling of Components in the Fused Deposition Modeling Process. Macromolecular Symposia, 411(1).https://doi.org/10.1002/masy.202200181 
LibreCat: /record/48277
DOI: 10.1002/masy.202200181

Moritzer, E., Hecker, F., Knaup, F., &; Wächter, J. (2023). Investigation of the Deposition Velocity Related Temperature Deviations for High Temperature Materials in the FDM Process. Proceedings of the 37th International Conference of the Polymer Processing Society (PPS-37), 170001-1-170001–170005.https://doi.org/10.1063/5.0168548 
LibreCat: /record/48357
DOI: 10.1063/5.0168548

Koers, T., &; Magyar, B. (2023). Determination and Compensation of the Shrinkage Behavior of Cylindrical Elements in the FDM Process. In J. Beaman (Ed.), Proceedings of the 34th Annual International Solid Freeform Fabrication Symposium 2023 (Vol. 34).
LibreCat: /record/47084

Lammers, S., Koers, T., Magyar, B., Zimmer, D., &; Lieneke, T. (2023). Depiction of support structures in technical drawings. In J. Beaman (Ed.), Proceedings of the 34th Annual International Solid Freeform Fabrication Symposium 2023 (Vol. 34).
LibreCat: /record/48790

Kletetzka, I., Neitzel, F., &; Schmid, H.-J. (2023). Assessing the Impact of the Powder Production Method on Ceramic-filled Polyamide Composites made by Laser Sintering. In J. Beaman (Ed.), Proceedings of the 34th Annual International Solid Freeform Fabrication Symposium.https://doi.org/10.26153/tsw/50931 
LibreCat: /record/51218
DOI: https://doi.org/10.26153/tsw/50931

Neitzel, F., Kletetzka, I., &; Schmid, H.-J. (2023). Halogen-Free Flame Retardant Powder Materials for Laser Sintering: Evaluation and Process Stability Analysis. In J. Beaman (Ed.), Proceedings of the 34th Annual International Solid Freeform Fabrication Symposium.https://doi.org/10.26153/tsw/50926 
LibreCat: /record/46862
DOI: https://doi.org/10.26153/tsw/50926

Moritzer, E., &; Elsner, C. L. (2022). Investigation and Improvement of Processing Parameters of a Copper-Filled Polymer Filament in Fused Filament Fabrication as a Basis for the Fabrication of Low-Porosity Metal Parts. Macromolecular Symposia, 404(1).https://doi.org/10.1002/masy.202100390 
LibreCat: /record/33859
DOI: https://doi.org/10.1002/masy.202100390

Moritzer, E., &; Wächter, J. (2022). Development of a Procedure for the Assessment of Material Potentials under Consideration of the Weld Seam Quality for Multi-Material Applications in the FDM Process. Macromolecular Symposia, 404(1).https://doi.org/10.1002/masy.202100389 
LibreCat: /record/33861
DOI: https://doi.org/10.1002/masy.202100389

Moritzer, E., &; Driediger, C. (2022). Reactive Direct Bonding of Digital Light Process Components. Macromolecular Symposia, 404(1).https://doi.org/10.1002/masy.202100396 
LibreCat: /record/33862
DOI: https://doi.org/10.1002/masy.202100396

Rüther, M. J., Klippstein, S. H., Ponusamy, S., Jesinghausen, S., &; Schmid, H.-J. (2022). Innovative Werkstoffherstellung für das Polymer Laser Sintern – Teil 2. Werkstoffe, 6, 18–19.
LibreCat: /record/35729

Rüther, M. J., Klippstein, S. H., Ponusamy, S., Jesinghausen, S., &; Schmid, H.-J. (2022). Innovative Werkstoffherstellung für das Polymer Laser Sintern – Teil 1. Werkstoffe, 5, 28–29.
LibreCat: /record/35724

Haase, M., &; Zimmer, D. (2022). Systematic Investigations Concerning Eddy Currents in Additively Manufactured Structures. In Innovative Product Development by Additive Manufacturing 2021. Springer International Publishing.https://doi.org/10.1007/978-3-031-05918-6_10 
LibreCat: /record/34113
DOI: 10.1007/978-3-031-05918-6_10

Klippstein, S. H., Heiny, F., Pashikanti, N., Gessler, M., &; Schmid, H.-J. (2022). Powder Spread Process Monitoring in Polymer Laser Sintering and its Influences on Part Properties. JOM - The Journal of The Minerals, Metals &; Materials Society (TMS), 74, 1149–1157.https://doi.org/10.1007/s11837-021-05042-w  
LibreCat: /record/30228
DOI: https://doi.org/10.1007/s11837-021-05042-w 

Klippstein, S. H., &; Schmid, H.-J. (2022). Powder Spread Flaws in Polymer Laser Sintering and its Influences on Mechanical Performance. Proceedings of the 33nd Annual International Solid Freeform Fabrication Symposium.
LibreCat: /record/33356

Moritzer, E., &; Hecker, F. (2022). VALIDATION AND COMPARISON OF FEM-SIMULATION RESULTS OF THE FUSED DEPOSITION MODELING PROCESS UNDER CONSIDERATION OF DIFFERENT MESH RESOLUTIONS. In D. L. Bourell, J. J. Beaman, R. H. Crawford, D. Kovar, C. C. Seepersad, &; M. Tehrani (Eds.), Proceedings of the 33rd Annual Freeform Fabrication Symposium (pp. 2011–2018).https://doi.org/10.26153/tsw/44657 
LibreCat: /record/33852
DOI: 10.26153/tsw/44657

Kletetzka, I., Gawlikowicz, R., &; Schmid, H.-J. (2022). Effects of spherical fillers on the processability and mechanical properties ofhttp://dx.doi.org/10.26153/tsw/44558__and PP-based LS dry blends. Proceedings of the 33th Annual International Solid Freeform Fabrication Symposium, 33.http://dx.doi.org/10.26153/tsw/44558 
LibreCat: /record/30220
DOI: http://dx.doi.org/10.26153/tsw/44558

Kletetzka, I., Klippstein, S. H., &; Schmid, H.-J. (2022). Shelf Life of Polyamide 12 () Laser Sintering Powder. Proceedings of the 33th Annual International Solid Freeform Fabrication Symposium, 33.http://dx.doi.org/10.26153/tsw/44555 
LibreCat: /record/32874
DOI: http://dx.doi.org/10.26153/tsw/44555

Bödger, C., Weiss, C., Schiefer, E., Heussen, D., &; Haefner, C. (2022). Evaluation of the Ecological Footprint for Parts from AlSi10Mg manufactured by Laser Powder Bed Fusion. Proceedings of the 33rd Annual International Solid Freeform Fabrication Symposium – An Additive Manufacturing Conference. Solid Freeform Fabrication, Austin.
LibreCat: /record/50744

Moritzer, E., &; Hecker, F. (2022). INVESTIGATION OF THE PROCESS PARAMETERS AND GEOMETRY DEPENDENT SHRINKAGE BEHAVIOR OF RASTER LINES IN THE FUSED DEPOSITION MODELING PROCESS. In D. L. Bourell, J. J. Beaman, R. H. Crawford, D. Kovar, C. C. Seepersad, &; M. Tehrani (Eds.), Proceedings of the 33rd Annual Freeform Fabrication Symposium (pp. 1844–1858).https://doi.org/10.26153/tsw/44654 
LibreCat: /record/33853
DOI: 10.26153/tsw/44654

Heiland, S., Milkereit, B., Hoyer, K.-P., Zhuravlev, E., Keßler, O., &; Schaper, M. (2021). Requirements for Processing High-Strength AlZnMgCu Alloys with PBF-LB/M to Achieve Crack-Free and Dense Parts. Materials.https://doi.org/10.3390/ma14237190 
LibreCat: /record/28017
DOI: https://doi.org/10.3390/ma14237190

Moritzer, E., &; Wächter, J. (2021). Einfluss eines beheizten Bauraums auf die Schweißnahtqualität. Plastverarbeiter, 04, 30–32.
LibreCat: /record/24168

Zhuravlev, E., Milkereit, B., Yang, B., Heiland, S., Vieth, P., Voigt, M., Schaper, M., Grundmeier, G., Schick, C., &; Kessler, O. (2021). Assessment of AlZnMgCu alloy powder modification for crack-free laser powder bed fusion by differential fast scanning calorimetry. Materials &; Design, Article 109677.https://doi.org/10.1016/j.matdes.2021.109677 
LibreCat: /record/24589
DOI: 10.1016/j.matdes.2021.109677

Künneke, T., &; Zimmer, D. (2021). Konstruktionsregeln für additiv gefertigte Partikeldämpfer/Design rules for additive manufactured particle dampers. Konstruktion, 72–78.https://doi.org/10.37544/0720-5953-2021-11-12-72 
LibreCat: /record/27528
DOI: 10.37544/0720-5953-2021-11-12-72

Lammers, S., Kruse, A., Gierse, J., Tominski, J., &; Lindemann, C.-F. (2021). Konstruktionsrichtlinien in der Produktentwicklung. In R. Koch, D. Zimmer, T. Tröster, &; I. Gräßler (Eds.), Mehrzieloptimierte und durchgängig automatisierte Bauteilentwicklung für Additive Fertigungsverfahren im Produktentstehungsprozess.
LibreCat: /record/23734

Menge, D., &; Schmid, H.-J. (2021). Low Temperature Laser Sintering on a Standard System: First Attempts and Results with P. Solid Freeform Fabrication Symposium, Austin, TX.
LibreCat: /record/23760

Nickchen, T., Heindorf, S., &; Engels, G. (2021). Generating Physically Sound Training Data for Image Recognition of Additively Manufactured Parts. In Proceedings of the IEEE/CVF Winter Conference on Applications of Computer Vision (pp. 1994–2002). Hawaii.
LibreCat: /record/20886

Magerkohl, S., Zimmer, D., Tasche, L., Schaper, M., Urbanek, S., &; Ponick, B. (2021). Funktionsoptimierte AM-Gestaltung eines E-Rotors. Antriebstechnik - Zeitschrift Für Konstruktion, Entwicklung Und Anwendung von Antrieben Und Steuerungen , 60(6), 36–43.
LibreCat: /record/22447

Zimmer, D., Koers, T., &; Bührmann, T. (2021). Zukunftstechnologie und moderne Antriebe kombiniert: AM in modularen Antriebssystemen. Newsletter Der Wissenschaftlichen Gesellschaft Für Produktentwicklung, 1, 9–10.
LibreCat: /record/22495

Moritzer, E., Hecker, F., Elsner, C. L., &; Hirsch, A. (n.d.). Influences of Temperature-Dependent Boundary Conditions on Component Properties in Arburg Plastic Freeforming. Proceedings of  36th Annual Meeting of Polymer Processing Society (PPS-36). 36th International Conference of the Polymer Processing Society, Montreal, Canada.
LibreCat: /record/25283

Moritzer, E., Hirsch, A., &; Dalmer, C. (2021). Investigation of Plastic Freeformed, Open-Pored Structures with Regard to Producibility, Reproducibility and Liquid Permeability (pp. 112–129). Springer.https://doi.org/10.1007/978-3-030-54334-1 
LibreCat: /record/22032
DOI: 10.1007/978-3-030-54334-1

Moritzer, E., Wächter, J., &; Elsner, C. L. (2021). Investigation of Specific FDM Process Parameters to Optimize the Polymer Discharge of Carbon Fiber Reinforced PEEK. Macromolecular Symposia, 395(1).https://doi.org/10.1002/masy.202000269 
LibreCat: /record/24162
DOI: 10.1002/masy.202000269

Moritzer, E., &; Schumacher, C. (2021). Stainless Steel Parts Produced by Fused Deposition Modeling and a Sintering Process Compared to Components Manufactured in Selective Laser Melting. Macromolecular Symposia, 395(1), Article 2000275.https://doi.org/10.1002/masy.202000275 
LibreCat: /record/24681
DOI: 10.1002/masy.202000275

Moritzer, E., Elsner, C. L., Wächter, J., &; Knoop, F. (2021). Investigation and Realization of Watertight FDM Structures Made of Ultem 9085 in Pressurized Systems. 79th Annual Technical Conference of the Society of Plastics Engineers (ANTEC). 79th Annual Technical Conference of the Society of Plastics Engineers (ANTEC).
LibreCat: /record/24554

Moritzer, E., Elsner, C. L., &; Schumacher, C. (2021). Investigation of MetalPolymer Composites Manufactured by Fused Deposition Modeling with Regard to Process Parameters. Polymer Composites, 42(11), 6065–6079.https://doi.org/10.1002/pc.26285 
LibreCat: /record/24555
DOI: 10.1002/pc.26285

Kruse, A., Ott, M., Risse, L., &; Koch, R. (2021). 3D-Druck - Eine Technologie als Schlüssel zur Steigerung der Teilhabe. 6. Tagung des DVM-Arbeitskreises Additiv gefertigte Bauteile und Strukturen, Berlin. Deutscher Verband für Materialforschung und -prüfung e.V.https://doi.org/10.48447/Add-2021-016 
LibreCat: /record/36845
DOI: 10.48447/Add-2021-016

Moritzer, E., Hecker, F., Elsner, C. L., &; Hirsch, A. (2021). Investigations for the Optimization of Visual and Geometrical Properties of Arburg Plastic Freeforming Components. In D. Bourell (Ed.), Proceedings: 2021 Annual International Solid Freeform Fabrication Symposium (SFF Symp 2021) (pp. 467–474).https://doi.org/10.26153/tsw/17567 
LibreCat: /record/24101
DOI: 10.26153/tsw/17567

Moritzer, E., Hecker, F., Driediger, C., &; Hirsch, A. (2021). Comparison of Component Properties and Economic Efficiency of the Arburg Plastic Freeforming and Fused Deposition Modeling. In D. Bourell (Ed.), Proceedings: 2021 Annual International Solid Freeform Fabrication Symposium (SFF Symp 2021) (pp. 575–584).https://doi.org/10.26153/tsw/17577 
LibreCat: /record/24099
DOI: 10.26153/tsw/17577

Moritzer, E., Hecker, F., &; Hirsch, A. (2021). Investigation and Modeling of the Residence Time Dependent Material Degradation in the Arburg Plastic Freeforming. In D. Bourell (Ed.), Proceedings: 2021 Annual International Solid Freeform Fabrication Symposium (SFF Symp 2021) (pp. 1268–1275).https://doi.org/10.26153/tsw/17643 
LibreCat: /record/24096
DOI: 10.26153/tsw/17643

Kletetzka, I., Kummert, C., &; Schmid, H.-J. (2021). Laser Sintering Design Guidelines for media transmitting Components. Proceedings of the 32nd Annual International Solid Freeform Fabrication Symposium, 32.http://dx.doi.org/10.26153/tsw/17548 
LibreCat: /record/24160
DOI: http://dx.doi.org/10.26153/tsw/17548

Nickchen, T., Engels, G., &; Lohn, J. (2020). Opportunities of 3D Machine Learning for Manufacturability Analysis and Component Recognition in the Additive Manufacturing Process Chain. In Industrializing Additive Manufacturing. Cham.https://doi.org/10.1007/978-3-030-54334-1_4 
LibreCat: /record/18789
DOI: 10.1007/978-3-030-54334-1_4

Brüggemann, J. P., Risse, L., Woodcock, S. C., Joy, T. D., Neumann, J., Vidner , J.,  Richard, H. A. (2020). Strukturoptimierung einer Messradkomponente zur realitätsnäheren Erfassung von Fahrzeuglastdaten und Bruchmechanische Bewertung. In DVM-Bericht 252, Arbeitskreis: Bruchmechanische Werkstoff- und Bauteilbewertung: Beanspruchungsanalyse, Prüfmethoden und Anwendungen, Deutscher Verband für Materialforschung und -prüfung e.V. (Vol. 252).
LibreCat: /record/22138

Brüggemann, J. P., Risse, L., Woodcock, S. C., Kullmer, G., &; Richard, H. A. (2020). Einsatz von Topologieoptimierungssoftware - Der Ersatz für den Ingenieur? In DVM-Bericht 405, Arbeitskreis: Additiv gefertigte Bauteile und Strukturen, Deutscher Verband für Materialforschung und -prüfung e.V. (Vol. 405).
LibreCat: /record/22142

Risse, L., &; Kullmer, G. (2020). Implementierung additiver Fertigungsverfahren in den chirurgischen Arbeitsablauf. In DVM-Bericht 405, Arbeitskreis: Additiv gefertigte Bauteile und Strukturen, Deutscher Verband für Materialforschung und -prüfung e.V. (Vol. 405).
LibreCat: /record/22143

Kummert, C., Diekmann, W., Tews, K., &; Schmid, H.-J. (2020). Influence of Part Microstructure on Mechanicl Properties of PX Laser Sintered Specimens. In 29th Annual International Solid Freeform Fabrication Symposium (Vol. 29, pp. 735–744).http://utw10945.utweb.utexas.edu/sites/default/files/2019/063%20Influence%20of%20Part%20Microstructure%20on%20Mechanical%20Pro.pdf 
LibreCat: /record/22182
DOI: http://utw10945.utweb.utexas.edu/sites/default/files/2019/063%20Influence%20of%20Part%20Microstructure%20on%20Mechanical%20Pro.pdf

Claes, L., Baumhögger, E., Rüther, T., Gierse, J., Tröster, T., &; Henning, B. (2020). Reduction of systematic measurement deviation in acoustic absorption measurement systems. Fortschritte Der Akustik - DAGA 2020, 1077–1080.
LibreCat: /record/15490

Brüggemann, J. P., Risse, L., Kullmer, G., &; Richard, H. A. (2019). Entwicklung von Optimierungsstrategien für Strukturbauteile unter Ausnutzung der Potentiale des Laser-Strahlschmelzens. Additive Fertigung von Bauteilen und Strukturen – Neue Erkenntnisse und Praxisbeispiele (pp. 1–22).
LibreCat: /record/22113

Risse, L., Woodcock, S. C., Kullmer, G., Schramm, B., &; Richard, H. A. (2019). Einsatz ingenieurmäßiger Methoden zur Lösung chirurgischer Herausforderungen (pp. 35–56).
LibreCat: /record/22115

Risse, L., &; Schramm, B. (2019). Möglichkeiten additiver Fertigungsverfahren im Zuge der Digitalisierung für den Planungsprozess chirurgischer Eingriffe. In DVM - Bericht 1685, DVM-Tag 2019 – Bauteil verstehen (Vol. 1685, pp. 103–120).
LibreCat: /record/22121

Brüggemann, J. P., Risse, L., Richard, H. A., &; Kullmer, G. (2019). Einflussfaktoren auf Bauteilgüte lasergeschmolzener Strukturen. In DVM - Bericht 251, Arbeitskreis: Bruchmechanische Werkstoff- und Bauteilbewertung: Beanspruchungsanalyse, Prüfmethoden und Anwendungen, Deutscher Verband für Materialforschung und -prüfung e.V. (Vol. 251, pp. 207–218).
LibreCat: /record/22123

Woodcock, S. C., Risse, L., Kullmer, G., &; Richard, H. A. (2019). Bewertung von verschieden gearteten Gitterstrukturen in Bezug auf ihre Einsatzfähigkeit in Bandscheibenimplantaten. In DVM - Bericht 404, Arbeitskreis: Additiv gefertigte Bauteile und Strukturen, Deutscher Verband für Materialforschung und -prüfung e.V. (Vol. 404, pp. 151–162).
LibreCat: /record/22124

Brüggemann, J. P., Risse, L., Richard, H. A., &; Kullmer, G. (2019). Einflussfaktoren auf Bauteilgüte lasergeschmolzener Strukturen. In DVM-Bericht 251, Arbeitskreis: Bruchmechanische Werkstoff- und Bauteilbewertung: Beanspruchungsanalyse, Prüfmethoden und Anwendungen, Deutscher Verband für Materialforschung und -prüfung e.V. (Vol. 251, pp. 207–218).
LibreCat: /record/22137

Risse, L., Woodcock, S. C., Kullmer, G., Schramm, B., Schlenker, F., &; Richard, H. A. (2019). Potentiale des Einsatzes individueller, additiv gefertigter medizinischer Hilfsmittel. In DVM-Bericht 404, Arbeitskreis: Additiv gefertigte Bauteile und Strukturen (Vol. 404, pp. 139–150).
LibreCat: /record/22140

Brüggemann, J. P., Risse, L., Woodcock, S. C., Duffe, T., Neumann, J., Vidner, J.,  Richard, H. A. (2019). Strukturoptimierung durch den Einsatz des Laser-Strahlschmelzprozesses zur realitätsnäheren Erfassung von Fahrzeug-Lastdaten. In DVM-Bericht 404, Arbeitskreis: Additiv gefertigte Bauteile und Strukturen, Deutscher Verband für Materialforschung und -prüfung e.V. (Vol. 404, pp. 69–82).
LibreCat: /record/22141

Risse, L., Woodcock, S. C., Kullmer, G., Schramm, B., &; Richard, H. A. (2019). Reconstruction of a defective finger joint surface and development of an adapted external fixator. In Lecture Notes in Computational Vision and Biomechanics  (pp. 230–238).
LibreCat: /record/22144

Klippstein, S. H., &; Schmid, H.-J. (2019). Methodik zur Qualifizierung des Lasersinter Prozesses für die Serienfertigung. Proceedings of the 16th Rapid.Tech Conference.https://doi.org/10.3139/9783446462441.025 
LibreCat: /record/22198
DOI: 10.3139/9783446462441.025

Künneke, T., Lieneke, T., Lammers, S., &; Zimmer, D. (2019). Design guidelines for post-processing of laser beam melting in context of support structures. In Proceedings of the Special Interest Group meeting on Advancing Precision in Additive Manufacturing (pp. 137–140).https://www.euspen.eu/knowledge-base/AM19127.pdf 
LibreCat: /record/22442
DOI: https://www.euspen.eu/knowledge-base/AM19127.pdf

Lieneke, T., Künneke, T., Schlenker, F., Denzer, V., &; Zimmer, D. (2019). Manufacturing Accuracy In Additive Manufacturing: A Method To Determine Geometrical Tolerances. In Special Interest Group Meeting: Advancing Precision in Additive Manufacturing.https://www.euspen.eu/knowledge-base/AM19129.pdf 
LibreCat: /record/22443
DOI: https://www.euspen.eu/knowledge-base/AM19129.pdf

Künneke, T., &; Zimmer, D. (2019). Schall mittels Pulver dämpfen. Konstruktionspraxis, 6, 24–26.
LibreCat: /record/22444

Gräßler, I., &; Oleff, C. (2019). Risikoorientierte Analyse und Handhabung von Anforderungsänderungen. In Design for X - Beiträge zum 30. DfX-Symposium  (Vol. 30, pp. 49–60).https://doi.org/ 10.35199/dfx2019.5 
LibreCat: /record/22000
DOI:  10.35199/dfx2019.5

Gräßler, I., Oleff, C., &; Scholle, P. (2019). Priorisierung von Anforderungen für die Entwicklung mechatronischer Systeme. In Fachtagung Mechatronik 2019 Paderborn (p. S. 1-6).https://doi.org/ 10.17619/UNIPB/1-791 
LibreCat: /record/22001
DOI:  10.17619/UNIPB/1-791

Gräßler, I., Thiele, H., Oleff, C., Scholle, P., &; Schulze, V. (2019). Priorisierung von Anforderungen für die Entwicklung mechatronischer Systeme. In International Conference on Engineering Design (ICE) (pp. 1265–1274).https://doi.org/10.17619/UNIPB/1-791 
LibreCat: /record/22002
DOI: 10.17619/UNIPB/1-791

Moritzer, E., Wächter, J., &; Elsner, M. (2019). Investigation of the Processability of Different PEEK Materials in the FDM Process with Regard to the Weld Seam Strength. 30th Annual International Solid Freeform Fabrication Symposium, 30, 856–863.http://utw10945.utweb.utexas.edu/sites/default/files/2019/074%20Investigation%20of%20The%20Processability%20of%20Different%20P.pdf 
LibreCat: /record/22022
DOI: http://utw10945.utweb.utexas.edu/sites/default/files/2019/074%20Investigation%20of%20The%20Processability%20of%20Different%20P.pdf

Moritzer, E., Hirsch, A., Heim, H. P., Cherif, C., &; Truemper, W. (2019). Plastic droplet welding: bond strength between plastic freeforming structures and continuous fiber-reinforced thermoplastic composites. Welding in the World, 63, 867–873.https://doi.org/10.1007/s40194-019-00714-3 
LibreCat: /record/22047
DOI: 10.1007/s40194-019-00714-3

Moritzer, E., Hirsch, A., &; Bürenhaus, F. I. (2019). Development and Modeling of Design and Process Guidelines for FDM Structures for the Partial Reinforcement of Hybrid Structures. AIP Conference Proceedings, 2065(1).https://doi.org/10.1063/1.5088314 
LibreCat: /record/22028
DOI: 10.1063/1.5088314

Schöppner, V., Schumacher, C., &; Fels, C. (2019). A Method to Evaluate the Process-Specific Warpage for Different Polymers in the FDM Process. AIP Conference Proceedings.https://doi.org/10.1063/1.5088315 
LibreCat: /record/22027
DOI: 10.1063/1.5088315

Moritzer, E., Hirsch, A., &; Paulus, S. (2019). Rissausbreitungsmechanismen in FDM-Verstärkungsstrukturen unter dynamischer Beanspruchung (pp. 185–198). Springer Vieweg.https://doi.org/10.1007/978-3-658-27412-2 
LibreCat: /record/22026
DOI: 10.1007/978-3-658-27412-2

Kruse, A., &; Mummert, M. (2019). Mit 3D-Druck umfassende Teilhabe möglich machen . Werkstatt:Dialog, 4, 34–35.
LibreCat: /record/36846

Klippstein, S. H., Duchting, A., Reiher, T., Hengsbach, F., Menge, D., &; Schmid, H.-J. (2019). Devolopment, Production and post-processing of a topology optimized aircraft bracket . 30th Annual International Solid Freeform Fabrication Symposium, 30, 1932–1945.
LibreCat: /record/22202

Lammers, S., Tominski, J., &; Zimmer, D. (2019). Guidelines for post processing oriented design of additive manufactured parts for use in topology optimization. II International Conference on Simulation for Additive Manufacturing Sim-AM 2019 11-13 September, 2019, 174–185.http://congress.cimne.com/sim-am2019/frontal/doc/EbookSim-AM2019.pdf 
LibreCat: /record/22441
DOI: http://congress.cimne.com/sim-am2019/frontal/doc/EbookSim-AM2019.pdf

Moritzer, E., Hirsch, A., &; Hecker, F. (2019). Process Parameter Optimization to Improve the Mechanical Properties of Arburg Plastic Freeformed Components. 30th Annual International Solid Freeform Fabrication Symposium, 30, 705–714.http://dx.doi.org/10.26153/tsw/17308 
LibreCat: /record/22041
DOI: http://dx.doi.org/10.26153/tsw/17308

Schafran, T., Schramm, B., &; Risse, L. (2018). Additive Fertigung in der modernen Orthopädietechnik - Anwendung und Forschungsansätze -. In DVM - AK Implantate und Biostrukturen.
LibreCat: /record/22116

Schramm, B., Risse, L., Brüggemann, J. P., Richard, H. A., &; Kullmer, G. (2018). Additive manufacturing for medical applications. Journal of 3D Printing in Medicine, 2.
LibreCat: /record/22117

Risse, L., Schramm, B., &; Schafran, T. (2018). Welche ingenieurstechnischen Perspektiven bietet die Versorgung durch additiv gefertigte Orthesen? In PreDay AK Fußchirurgie.
LibreCat: /record/22118

Kummert, C., &; Schmid, H.-J. (2018). The Influence of Contour Scanning Parameters and Strategy on Selective Laser Sintering  Build Part Properties. In 29th Annual International Solid Freeform Fabrication Symposium (Vol. 29).
LibreCat: /record/22120

Brüggemann, J. P., Risse, L., Grübel, A., Richard, H. A., &; Kullmer, G. (2018). Validierung der strukturmechanischen Funktionsfähigkeit durch experimentelle Bauteilprüfungen additiv gefertigter Leichtbaustrukturen. In DVM - Bericht 250, Arbeitskreis: Bruchmechanische Werkstoff- und Bauteilbewertung: Beanspruchungsanalyse, Prüfmethoden und Anwendungen, Deutscher Verband für Materialforschung und -prüfung e.V. (Vol. 250, pp. 89–98).https://doi.org/10.1007/978-3-658-27412-2_1 
LibreCat: /record/22122
DOI: 10.1007/978-3-658-27412-2_1

Dsuban, A., Lohn, J., Brüggemann, J. P., &; Kullmer, G. (2018). Entwicklung und Umsetzung eines Qualitätssicherungskonzeptes für die additive Fertigung. In DVM - Bericht 403, Arbeitskreis: Additiv gefertigte Bauteile und Strukturen, Deutscher Verband für Materialforschung und -prüfung e.V. (Vol. 403, pp. 110–110).
LibreCat: /record/22125

Brüggemann, J. P., Risse, L., Richard, H. A., &; Kullmer, G. (2018). Entwicklung von Optimierungsstrategien unter Ausnutzung des Potentials der additiven Fer-tigung. In DVM - Bericht 403, Arbeitskreis: Additiv gefertigte Bauteile und Strukturen, Deutscher Verband für Materialforschung und -prüfung e.V. (Vol. 403, pp. 11–21).
LibreCat: /record/22126

Risse, L., Schramm, B., Brüggemann, J. P., Woodcock, S. C., Kullmer, G., &; Richard, H. A. (2018). CAE-gestützte Optimierung eines Hüftimplantats durch Ausnutzung der Potentiale additiver Fertigungsverfahren. In DVM-Bericht 403, Arbeitskreis: Additiv gefertigte Bauteile und Strukturen, Deutscher Verband für Materialforschung und -prüfung e.V. (Vol. 403, pp. 89–100).
LibreCat: /record/22139

Joy, T. D., Brüggemann, J. P., &; Kullmer, G. (2018). Crack Growth Simulation with Adapcrack3D in 3D Structures under the influence of Temperature. In Procedia Structural Integrity (p. in press).
LibreCat: /record/22145

Brüggemann, J. P., Risse, L., Kullmer, G., Schramm, B., &; Richard, H. A. (2018). Optimization of the fracture mechanical properties of additively manufactured EN AW-7075. In Procedia Structural Integrity (p. in press).https://doi.org/10.1016/j.prostr.2018.12.052 
LibreCat: /record/22147
DOI: 10.1016/j.prostr.2018.12.052

Brüggemann, J. P., Risse, L., Kullmer, G., &; Richard, H. A. (2018). Fracture mechanical investigations on selective laser melted TiAl6. In Procedia Structural Integrity (p. in press).https://doi.org/10.1016/j.prostr.2018.12.053 
LibreCat: /record/22148
DOI: 10.1016/j.prostr.2018.12.053

Risse, L., Schramm, B., Brüggemann, J. P., Kullmer, G., &; Richard, H. A. (2018). Entwicklung von steifigkeitsangepassten, lasergeschmolzenen Kurzschaft-Hüftendoprothesen. In Proceedings of the 15th Rapid.Tech Conference (pp. 405–417).
LibreCat: /record/22150

Menge, D., Delfs, P., Töws, M., &; Schmid, H.-J. (2018). Topology Optimized Heat Transfer Using the Example of an Electronic Housing. 29th Annual International Solid Freeform Fabrication Symposium, 29, 687–697.
LibreCat: /record/22183

Kummert, C., Josupeit, S., &; Schmid, H.-J. (2018). Thermoplastic Elastomer Part Color as Function of Temperature Histories and Oxygen Atmosphere During Selective Laser Sinterung. Journal of Minerals, Metals and Materials Society, 70(3), 425–430.https://doi.org/10.1007/s11837-017-2658-2 
LibreCat: /record/22196
DOI: 10.1007/s11837-017-2658-2

Urbanek, S., Ponick, B., Taube, A., Hoyer, K.-P., Schaper, M., Lammers, S.,  Zimmer, D. (2018). Additive Manufacturing of a Soft Magnetic Rotor Active Part and Shaft for a Permanent Magnet Synchronous Machine. In Conference paper, 2018 IEEE Transportation Electrification Conference and Expo (ITEC), Juni 2018, DOI: 10.1109/ITEC.2018.8450250.
LibreCat: /record/22430

Tominski, J., &; Lammers, S. (2018). Software-assisted design check of additive manufactured components. In 14th PERMAS Users’ Conference (Vol. 14).https://www.semanticscholar.org/paper/METHOD-FOR-A-SOFTWARE-BASED-DESIGN-CHECK-OF-Tominski-Lammers/83e141f55b33041ade5e661958b449047d6f026e#extracted 
LibreCat: /record/22433
DOI: https://www.semanticscholar.org/paper/METHOD-FOR-A-SOFTWARE-BASED-DESIGN-CHECK-OF-Tominski-Lammers/83e141f55b33041ade5e661958b449047d6f026e#extracted

Tominski, J., Lammers, S., Wulf, C., &; Zimmer, D. (2018). Method for a Software-based Design Check of Additively Manufactured Components. In 29th Annual International Solid Freeform Fabrication Symposium (Vol. 29).http://utw10945.utweb.utexas.edu/sites/default/files/2018/006%20MethodforaSoftwareBasedDesignCheckofAdditi.pdf 
LibreCat: /record/22434
DOI: http://utw10945.utweb.utexas.edu/sites/default/files/2018/006%20MethodforaSoftwareBasedDesignCheckofAdditi.pdf

Künneke, T., Bücker, S., Lieneke, T., &; Zimmer, D. (2018). Ein Beitrag zur Anpassung bestehender Konstruktionsmethodiken an die additiven Fertigungsverfahren. In Proceedings of the 15th Rapid.Tech Conference (pp. 128–143). Carl Hanser Verlag GmbH &; Co. KG.https://doi.org/10.3139/9783446458123.008 
LibreCat: /record/22435
DOI: 10.3139/9783446458123.008

Jacob, A., Künneke, T., Lieneke, T., Baumann, T., Stricker, N., Zimmer, D., &; Lanza, G. (2018). Iterative Produktentwicklung und Produktionsplanung für die Additive Fertigung. ZWF Zeitschrift Für Wirtschaftlichen Fabrikbetrieb, 113(11), 742–745.https://doi.org/10.3139/104.112005 
LibreCat: /record/22436
DOI: https://doi.org/10.3139/104.112005

Brückner, U., Künneke, T., Schadomsky, M. H., Strop, M., &; Zimmer, D. (2018). Elektromechanische Antriebe (pp. 247–290). Carl Hanser Verlag.https://doi.org/10.3139/9783446456198.009 
LibreCat: /record/22506
DOI: 10.3139/9783446456198.009