E. Moritzer and C. L. Elsner, “Evaluation of the Influence of Particle Type, Shape and Size on the Thermal Conductivity of Filled Polymers in the Fused Filament Fabrication Process,” presented at the Annual Technical Conference of the Society of Plastics Engineers (ANTEC 2024), St. Louis, 2024.
LibreCat: /record/53529

M. J. Rüther, S. H. Klippstein, S. Ponusamy, T. Rüther, and H.-J. Schmid, “Flowability of polymer powders at elevated temperatures for additive manufacturing,”10.1016/j.powtec.2023.118460__Powder Technology, vol. 422, Art. no. 118460, 2023, doi:10.1016/j.powtec.2023.118460 .
LibreCat: /record/43128
DOI: 10.1016/j.powtec.2023.118460

M. Haase et al., “Umsetzung einer optimierten Oberflächenschlitzung zur Wirbelstromverlustreduktion auf der Oberfläche eines additiv gefertigten Permanentmagnet-Rotors,” in Proceedings of the 19th Rapid.Tech 3D Conference Erfurt, Germany, 9–11 May 2023, M. Kynast, M. Eichmann, and G. Witt, Eds. München: Carl Hanser Verlag GmbH &; Co. KG, 2023.
LibreCat: /record/45360

A. Andreiev et al., “Powder bed fusion of soft-magnetic iron-based alloys with high silicon content,”10.1016/j.jmatprotec.2023.117991__Journal of Materials Processing Technology, vol. 317, Art. no. 117991, 2023, doi:10.1016/j.jmatprotec.2023.117991 .
LibreCat: /record/44078
DOI: 10.1016/j.jmatprotec.2023.117991

I. Kletetzka, M. Kosanke, D. Meinderink, V. Neßlinger, G. Grundmeier, and H.-J. Schmid, “Influence of the filler–matrix adhesion and the effects of conditioning on tensile properties of laser-sintered parts built with polyamide–glass bead dry blends,”10.1007/s40964-023-00501-z__Progress in Additive Manufacturing, 2023, doi:10.1007/s40964-023-00501-z .
LibreCat: /record/46815
DOI: 10.1007/s40964-023-00501-z

S. H. Klippstein, I. Kletetzka, I. Sural, and H.-J. Schmid, “Influence of a prolonged shelf time on P laser sintering powder and resulting part properties,”https://doi.org/10.1007/s00170-023-11243-1__The International Journal of Advanced Manufacturing Technology , 2023, doi:https://doi.org/10.1007/s00170-023-11243-1 .
LibreCat: /record/43046
DOI: https://doi.org/10.1007/s00170-023-11243-1

I. Kletetzka, F. Neitzel, and H.-J. Schmid, “Assessing the Impact of the Powder Production Method on Ceramic-filled Polyamide Composites made by Laser Sintering,” in Proceedings of the 34th Annual International Solid Freeform Fabrication Symposium, Austin, 2023, vol. 34.
LibreCat: /record/46764

T. Koers and B. Magyar, “Compensation of the Shrinkage Behavior Occurring in Cylindrical Components in the FDM Process,”https://doi.org/10.1002/masy.202200185__in Macromolecular Symposia, Bucharest, Romania, 2023, vol. 411, no. 1, doi:https://doi.org/10.1002/masy.202200185 .
LibreCat: /record/48095
DOI: https://doi.org/10.1002/masy.202200185

M. Bieber, M. Haase, F. Tasche, A. Zibart, and B. Ponick, “Additively manufactured air-cooled lightweight rotor for an automotive electric motor,”10.1109/iemdc55163.2023.10238918__2023, doi:10.1109/iemdc55163.2023.10238918 .
LibreCat: /record/49774
DOI: 10.1109/iemdc55163.2023.10238918

C. Bödger, S. Gnaase, D. Lehnert, and T. Tröster, “Investigation of the influence of process parameters on productivity in the LPBF process for the material Inconel 718,” presented at the Solid Freeform Fabrication, Austin, 2023.
LibreCat: /record/50742

E. Moritzer and F. Hecker, “Adaptive Scaling of Components in the Fused Deposition Modeling Process,”10.1002/masy.202200181__Macromolecular Symposia, vol. 411, no. 1, 2023, doi:10.1002/masy.202200181 .
LibreCat: /record/48277
DOI: 10.1002/masy.202200181

E. Moritzer, F. Hecker, F. Knaup, and J. Wächter, “Investigation of the Deposition Velocity Related Temperature Deviations for High Temperature Materials in the FDM Process,”10.1063/5.0168548__in Proceedings of the 37th International Conference of the Polymer Processing Society (PPS-37), Fukuoka (Japan), 2023, pp. 170001-1-170001–5, doi:10.1063/5.0168548 .
LibreCat: /record/48357
DOI: 10.1063/5.0168548

T. Koers and B. Magyar, “Determination and Compensation of the Shrinkage Behavior of Cylindrical Elements in the FDM Process,” in Proceedings of the 34th Annual International Solid Freeform Fabrication Symposium 2023, Austin, Texas, USA, 2023, vol. 34.
LibreCat: /record/47084

S. Lammers, T. Koers, B. Magyar, D. Zimmer, and T. Lieneke, “Depiction of support structures in technical drawings,” in Proceedings of the 34th Annual International Solid Freeform Fabrication Symposium 2023, Austin, Texas, USA, 2023, vol. 34.
LibreCat: /record/48790

I. Kletetzka, F. Neitzel, and H.-J. Schmid, “Assessing the Impact of the Powder Production Method on Ceramic-filled Polyamide Composites made by Laser Sintering,”https://doi.org/10.26153/tsw/50931__in Proceedings of the 34th Annual International Solid Freeform Fabrication Symposium, Austin, 2023, doi:https://doi.org/10.26153/tsw/50931 .
LibreCat: /record/51218
DOI: https://doi.org/10.26153/tsw/50931

F. Neitzel, I. Kletetzka, and H.-J. Schmid, “Halogen-Free Flame Retardant Powder Materials for Laser Sintering: Evaluation and Process Stability Analysis,”https://doi.org/10.26153/tsw/50926__in Proceedings of the 34th Annual International Solid Freeform Fabrication Symposium, Austin, 2023, doi:https://doi.org/10.26153/tsw/50926 .
LibreCat: /record/46862
DOI: https://doi.org/10.26153/tsw/50926

E. Moritzer and C. L. Elsner, “Investigation and Improvement of Processing Parameters of a Copper-Filled Polymer Filament in Fused Filament Fabrication as a Basis for the Fabrication of Low-Porosity Metal Parts,”https://doi.org/10.1002/masy.202100390__Macromolecular Symposia, vol. 404, no. 1, 2022, doi:https://doi.org/10.1002/masy.202100390 .
LibreCat: /record/33859
DOI: https://doi.org/10.1002/masy.202100390

E. Moritzer and J. Wächter, “Development of a Procedure for the Assessment of Material Potentials under Consideration of the Weld Seam Quality for Multi-Material Applications in the FDM Process,”https://doi.org/10.1002/masy.202100389__Macromolecular Symposia, vol. 404, no. 1, 2022, doi:https://doi.org/10.1002/masy.202100389 .
LibreCat: /record/33861
DOI: https://doi.org/10.1002/masy.202100389

E. Moritzer and C. Driediger, “Reactive Direct Bonding of Digital Light Process Components,”https://doi.org/10.1002/masy.202100396__Macromolecular Symposia, vol. 404, no. 1, 2022, doi:https://doi.org/10.1002/masy.202100396 .
LibreCat: /record/33862
DOI: https://doi.org/10.1002/masy.202100396

M. J. Rüther, S. H. Klippstein, S. Ponusamy, S. Jesinghausen, and H.-J. Schmid, “Innovative Werkstoffherstellung für das Polymer Laser Sintern – Teil 2,” Werkstoffe, vol. 6, pp. 18–19, 2022.
LibreCat: /record/35729

M. J. Rüther, S. H. Klippstein, S. Ponusamy, S. Jesinghausen, and H.-J. Schmid, “Innovative Werkstoffherstellung für das Polymer Laser Sintern – Teil 1,” Werkstoffe, vol. 5, pp. 28–29, 2022.
LibreCat: /record/35724

M. Haase and D. Zimmer, “Systematic Investigations Concerning Eddy Currents in Additively Manufactured Structures,” in Innovative Product Development by Additive Manufacturing 2021, Cham: Springer International Publishing, 2022.
LibreCat: /record/34113
DOI: 10.1007/978-3-031-05918-6_10

S. H. Klippstein, F. Heiny, N. Pashikanti, M. Gessler, and H.-J. Schmid, “Powder Spread Process Monitoring in Polymer Laser Sintering and its Influences on Part Properties,”https://doi.org/10.1007/s11837-021-05042-w __JOM - The Journal of The Minerals, Metals &; Materials Society (TMS), vol. 74, pp. 1149–1157, 2022, doi:https://doi.org/10.1007/s11837-021-05042-w  .
LibreCat: /record/30228
DOI: https://doi.org/10.1007/s11837-021-05042-w 

S. H. Klippstein and H.-J. Schmid, “Powder Spread Flaws in Polymer Laser Sintering and its Influences on Mechanical Performance,” 2022.
LibreCat: /record/33356

E. Moritzer and F. Hecker, “VALIDATION AND COMPARISON OF FEM-SIMULATION RESULTS OF THE FUSED DEPOSITION MODELING PROCESS UNDER CONSIDERATION OF DIFFERENT MESH RESOLUTIONS,”10.26153/tsw/44657__in Proceedings of the 33rd Annual Freeform Fabrication Symposium, Austin, Texas, USA, 2022, pp. 2011–2018, doi:10.26153/tsw/44657 .
LibreCat: /record/33852
DOI: 10.26153/tsw/44657

I. Kletetzka, R. Gawlikowicz, and H.-J. Schmid, “Effects of spherical fillers on the processability and mechanical properties ofhttp://dx.doi.org/10.26153/tsw/44558__and PP-based LS dry blends,”http://dx.doi.org/10.26153/tsw/44558__in Proceedings of the 33th Annual International Solid Freeform Fabrication Symposium, Austin, 2022, vol. 33, doi:http://dx.doi.org/10.26153/tsw/44558 .
LibreCat: /record/30220
DOI: http://dx.doi.org/10.26153/tsw/44558

I. Kletetzka, S. H. Klippstein, and H.-J. Schmid, “Shelf Life of Polyamide 12 () Laser Sintering Powder,”http://dx.doi.org/10.26153/tsw/44555__in Proceedings of the 33th Annual International Solid Freeform Fabrication Symposium, Austin, 2022, vol. 33, doi:http://dx.doi.org/10.26153/tsw/44555 .
LibreCat: /record/32874
DOI: http://dx.doi.org/10.26153/tsw/44555

C. Bödger, C. Weiss, E. Schiefer, D. Heussen, and C. Haefner, “Evaluation of the Ecological Footprint for Parts from AlSi10Mg manufactured by Laser Powder Bed Fusion,” presented at the Solid Freeform Fabrication, Austin, 2022.
LibreCat: /record/50744

E. Moritzer and F. Hecker, “INVESTIGATION OF THE PROCESS PARAMETERS AND GEOMETRY DEPENDENT SHRINKAGE BEHAVIOR OF RASTER LINES IN THE FUSED DEPOSITION MODELING PROCESS,”10.26153/tsw/44654__in Proceedings of the 33rd Annual Freeform Fabrication Symposium, Austin, Texas, USA, 2022, pp. 1844–1858, doi:10.26153/tsw/44654 .
LibreCat: /record/33853
DOI: 10.26153/tsw/44654

S. Heiland, B. Milkereit, K.-P. Hoyer, E. Zhuravlev, O. Keßler, and M. Schaper, “Requirements for Processing High-Strength AlZnMgCu Alloys with PBF-LB/M to Achieve Crack-Free and Dense Parts,”https://doi.org/10.3390/ma14237190__Materials, 2021, doi:https://doi.org/10.3390/ma14237190 .
LibreCat: /record/28017
DOI: https://doi.org/10.3390/ma14237190

E. Moritzer and J. Wächter, “Einfluss eines beheizten Bauraums auf die Schweißnahtqualität,” Plastverarbeiter, no. 04, pp. 30–32, 2021.
LibreCat: /record/24168

E. Zhuravlev et al., “Assessment of AlZnMgCu alloy powder modification for crack-free laser powder bed fusion by differential fast scanning calorimetry,”10.1016/j.matdes.2021.109677__Materials &; Design, Art. no. 109677, 2021, doi:10.1016/j.matdes.2021.109677 .
LibreCat: /record/24589
DOI: 10.1016/j.matdes.2021.109677

T. Künneke and D. Zimmer, “Konstruktionsregeln für additiv gefertigte Partikeldämpfer/Design rules for additive manufactured particle dampers,”10.37544/0720-5953-2021-11-12-72__Konstruktion, pp. 72–78, 2021, doi:10.37544/0720-5953-2021-11-12-72 .
LibreCat: /record/27528
DOI: 10.37544/0720-5953-2021-11-12-72

S. Lammers, A. Kruse, J. Gierse, J. Tominski, and C.-F. Lindemann, “Konstruktionsrichtlinien in der Produktentwicklung,” in Mehrzieloptimierte und durchgängig automatisierte Bauteilentwicklung für Additive Fertigungsverfahren im Produktentstehungsprozess, R. Koch, D. Zimmer, T. Tröster, and I. Gräßler, Eds. 2021.
LibreCat: /record/23734

D. Menge and H.-J. Schmid, “Low Temperature Laser Sintering on a Standard System: First Attempts and Results with P,” presented at the Solid Freeform Fabrication Symposium, Austin, TX, 2021.
LibreCat: /record/23760

T. Nickchen, S. Heindorf, and G. Engels, “Generating Physically Sound Training Data for Image Recognition of Additively Manufactured Parts,” in Proceedings of the IEEE/CVF Winter Conference on Applications of Computer Vision, Hawaii, 2021, pp. 1994–2002.
LibreCat: /record/20886

S. Magerkohl, D. Zimmer, L. Tasche, M. Schaper, S. Urbanek, and B. Ponick, “Funktionsoptimierte AM-Gestaltung eines E-Rotors,” antriebstechnik - Zeitschrift für Konstruktion, Entwicklung und Anwendung von Antrieben und Steuerungen , vol. 60, no. 6, pp. 36–43, 2021.
LibreCat: /record/22447

D. Zimmer, T. Koers, and T. Bührmann, “Zukunftstechnologie und moderne Antriebe kombiniert: AM in modularen Antriebssystemen,” Newsletter der Wissenschaftlichen Gesellschaft für Produktentwicklung, vol. 1, pp. 9–10, 2021.
LibreCat: /record/22495

E. Moritzer, F. Hecker, C. L. Elsner, and A. Hirsch, “Influences of Temperature-Dependent Boundary Conditions on Component Properties in Arburg Plastic Freeforming,” presented at the 36th International Conference of the Polymer Processing Society, Montreal, Canada.
LibreCat: /record/25283

E. Moritzer, A. Hirsch, and C. Dalmer, Investigation of Plastic Freeformed, Open-Pored Structures with Regard to Producibility, Reproducibility and Liquid Permeability. Springer, 2021, pp. 112–129.
LibreCat: /record/22032
DOI: 10.1007/978-3-030-54334-1

E. Moritzer, J. Wächter, and C. L. Elsner, “Investigation of Specific FDM Process Parameters to Optimize the Polymer Discharge of Carbon Fiber Reinforced PEEK,”10.1002/masy.202000269__Macromolecular Symposia, vol. 395, no. 1, 2021, doi:10.1002/masy.202000269 .
LibreCat: /record/24162
DOI: 10.1002/masy.202000269

E. Moritzer and C. Schumacher, “Stainless Steel Parts Produced by Fused Deposition Modeling and a Sintering Process Compared to Components Manufactured in Selective Laser Melting,”10.1002/masy.202000275__Macromolecular Symposia, vol. 395, no. 1, Art. no. 2000275, 2021, doi:10.1002/masy.202000275 .
LibreCat: /record/24681
DOI: 10.1002/masy.202000275

E. Moritzer, C. L. Elsner, J. Wächter, and F. Knoop, “Investigation and Realization of Watertight FDM Structures Made of Ultem 9085 in Pressurized Systems,” presented at the 79th Annual Technical Conference of the Society of Plastics Engineers (ANTEC), 2021.
LibreCat: /record/24554

E. Moritzer, C. L. Elsner, and C. Schumacher, “Investigation of MetalPolymer Composites Manufactured by Fused Deposition Modeling with Regard to Process Parameters,”10.1002/pc.26285__Polymer Composites, vol. 42, no. 11, pp. 6065–6079, 2021, doi:10.1002/pc.26285 .
LibreCat: /record/24555
DOI: 10.1002/pc.26285

A. Kruse, M. Ott, L. Risse, and R. Koch, “D-Druck - Eine Technologie als Schlüssel zur Steigerung der Teilhabe.”10.48447/Add-2021-016__Deutscher Verband für Materialforschung und -prüfung e.V., 2021, doi:10.48447/Add-2021-016 .
LibreCat: /record/36845
DOI: 10.48447/Add-2021-016

E. Moritzer, F. Hecker, C. L. Elsner, and A. Hirsch, “Investigations for the Optimization of Visual and Geometrical Properties of Arburg Plastic Freeforming Components,”10.26153/tsw/17567__in Proceedings: 2021 Annual International Solid Freeform Fabrication Symposium (SFF Symp 2021), Austin, Texas, USA, 2021, pp. 467–474, doi:10.26153/tsw/17567 .
LibreCat: /record/24101
DOI: 10.26153/tsw/17567

E. Moritzer, F. Hecker, C. Driediger, and A. Hirsch, “Comparison of Component Properties and Economic Efficiency of the Arburg Plastic Freeforming and Fused Deposition Modeling,”10.26153/tsw/17577__in Proceedings: 2021 Annual International Solid Freeform Fabrication Symposium (SFF Symp 2021), Austin, Texas, USA, 2021, pp. 575–584, doi:10.26153/tsw/17577 .
LibreCat: /record/24099
DOI: 10.26153/tsw/17577

E. Moritzer, F. Hecker, and A. Hirsch, “Investigation and Modeling of the Residence Time Dependent Material Degradation in the Arburg Plastic Freeforming,”10.26153/tsw/17643__in Proceedings: 2021 Annual International Solid Freeform Fabrication Symposium (SFF Symp 2021), Austin, Texas, USA, 2021, pp. 1268–1275, doi:10.26153/tsw/17643 .
LibreCat: /record/24096
DOI: 10.26153/tsw/17643

I. Kletetzka, C. Kummert, and H.-J. Schmid, “Laser Sintering Design Guidelines for media transmitting Components,”http://dx.doi.org/10.26153/tsw/17548__in Proceedings of the 32nd Annual International Solid Freeform Fabrication Symposium, Austin, 2021, vol. 32, doi:http://dx.doi.org/10.26153/tsw/17548 .
LibreCat: /record/24160
DOI: http://dx.doi.org/10.26153/tsw/17548

T. Nickchen, G. Engels, and J. Lohn, “Opportunities of 3D Machine Learning for Manufacturability Analysis and Component Recognition in the Additive Manufacturing Process Chain,” in Industrializing Additive Manufacturing, Cham, 2020.
LibreCat: /record/18789
DOI: 10.1007/978-3-030-54334-1_4

J. P. Brüggemann et al., “Strukturoptimierung einer Messradkomponente zur realitätsnäheren Erfassung von Fahrzeuglastdaten und Bruchmechanische Bewertung,” in DVM-Bericht 252, Arbeitskreis: Bruchmechanische Werkstoff- und Bauteilbewertung: Beanspruchungsanalyse, Prüfmethoden und Anwendungen, Deutscher Verband für Materialforschung und -prüfung e.V., 2020, vol. 252.
LibreCat: /record/22138

J. P. Brüggemann, L. Risse, S. C. Woodcock, G. Kullmer, and H. A. Richard, “Einsatz von Topologieoptimierungssoftware - Der Ersatz für den Ingenieur?,” in DVM-Bericht 405, Arbeitskreis: Additiv gefertigte Bauteile und Strukturen, Deutscher Verband für Materialforschung und -prüfung e.V., 2020, vol. 405.
LibreCat: /record/22142

L. Risse and G. Kullmer, “Implementierung additiver Fertigungsverfahren in den chirurgischen Arbeitsablauf,” in DVM-Bericht 405, Arbeitskreis: Additiv gefertigte Bauteile und Strukturen, Deutscher Verband für Materialforschung und -prüfung e.V., 2020, vol. 405.
LibreCat: /record/22143

C. Kummert, W. Diekmann, K. Tews, and H.-J. Schmid, “Influence of Part Microstructure on Mechanicl Properties of PX Laser Sintered Specimens,” in 29th Annual International Solid Freeform Fabrication Symposium, 2020, vol. 29, pp. 735–744.
LibreCat: /record/22182
DOI: http://utw10945.utweb.utexas.edu/sites/default/files/2019/063%20Influence%20of%20Part%20Microstructure%20on%20Mechanical%20Pro.pdf

L. Claes, E. Baumhögger, T. Rüther, J. Gierse, T. Tröster, and B. Henning, “Reduction of systematic measurement deviation in acoustic absorption measurement systems,” in Fortschritte der Akustik - DAGA 2020, 2020, pp. 1077–1080.
LibreCat: /record/15490

J. P. Brüggemann, L. Risse, G. Kullmer, and H. A. Richard, Entwicklung von Optimierungsstrategien für Strukturbauteile unter Ausnutzung der Potentiale des Laser-Strahlschmelzens. 2019, pp. 1–22.
LibreCat: /record/22113

L. Risse, S. C. Woodcock, G. Kullmer, B. Schramm, and H. A. Richard, Einsatz ingenieurmäßiger Methoden zur Lösung chirurgischer Herausforderungen. 2019, pp. 35–56.
LibreCat: /record/22115

L. Risse and B. Schramm, “Möglichkeiten additiver Fertigungsverfahren im Zuge der Digitalisierung für den Planungsprozess chirurgischer Eingriffe,” in DVM - Bericht 1685, DVM-Tag 2019 – Bauteil verstehen, 2019, vol. 1685, pp. 103–120.
LibreCat: /record/22121

J. P. Brüggemann, L. Risse, H. A. Richard, and G. Kullmer, “Einflussfaktoren auf Bauteilgüte lasergeschmolzener Strukturen,” in DVM - Bericht 251, Arbeitskreis: Bruchmechanische Werkstoff- und Bauteilbewertung: Beanspruchungsanalyse, Prüfmethoden und Anwendungen, Deutscher Verband für Materialforschung und -prüfung e.V., 2019, vol. 251, pp. 207–218.
LibreCat: /record/22123

S. C. Woodcock, L. Risse, G. Kullmer, and H. A. Richard, “Bewertung von verschieden gearteten Gitterstrukturen in Bezug auf ihre Einsatzfähigkeit in Bandscheibenimplantaten,” in DVM - Bericht 404, Arbeitskreis: Additiv gefertigte Bauteile und Strukturen, Deutscher Verband für Materialforschung und -prüfung e.V., 2019, vol. 404, pp. 151–162.
LibreCat: /record/22124

J. P. Brüggemann, L. Risse, H. A. Richard, and G. Kullmer, “Einflussfaktoren auf Bauteilgüte lasergeschmolzener Strukturen,” in DVM-Bericht 251, Arbeitskreis: Bruchmechanische Werkstoff- und Bauteilbewertung: Beanspruchungsanalyse, Prüfmethoden und Anwendungen, Deutscher Verband für Materialforschung und -prüfung e.V., 2019, vol. 251, pp. 207–218.
LibreCat: /record/22137

L. Risse, S. C. Woodcock, G. Kullmer, B. Schramm, F. Schlenker, and H. A. Richard, “Potentiale des Einsatzes individueller, additiv gefertigter medizinischer Hilfsmittel,” in DVM-Bericht 404, Arbeitskreis: Additiv gefertigte Bauteile und Strukturen, 2019, vol. 404, pp. 139–150.
LibreCat: /record/22140

J. P. Brüggemann et al., “Strukturoptimierung durch den Einsatz des Laser-Strahlschmelzprozesses zur realitätsnäheren Erfassung von Fahrzeug-Lastdaten,” in DVM-Bericht 404, Arbeitskreis: Additiv gefertigte Bauteile und Strukturen, Deutscher Verband für Materialforschung und -prüfung e.V., 2019, vol. 404, pp. 69–82.
LibreCat: /record/22141

L. Risse, S. C. Woodcock, G. Kullmer, B. Schramm, and H. A. Richard, “Reconstruction of a defective finger joint surface and development of an adapted external fixator,” in Lecture Notes in Computational Vision and Biomechanics , 2019, pp. 230–238.
LibreCat: /record/22144

S. H. Klippstein and H.-J. Schmid, “Methodik zur Qualifizierung des Lasersinter Prozesses für die Serienfertigung,”10.3139/9783446462441.025__2019, doi:10.3139/9783446462441.025 .
LibreCat: /record/22198
DOI: 10.3139/9783446462441.025

T. Künneke, T. Lieneke, S. Lammers, and D. Zimmer, “Design guidelines for post-processing of laser beam melting in context of support structures,” in Proceedings of the Special Interest Group meeting on Advancing Precision in Additive Manufacturing, 2019, pp. 137–140.
LibreCat: /record/22442
DOI: https://www.euspen.eu/knowledge-base/AM19127.pdf

T. Lieneke, T. Künneke, F. Schlenker, V. Denzer, and D. Zimmer, “Manufacturing Accuracy In Additive Manufacturing: A Method To Determine Geometrical Tolerances,” in Special Interest Group Meeting: Advancing Precision in Additive Manufacturing, 2019.
LibreCat: /record/22443
DOI: https://www.euspen.eu/knowledge-base/AM19129.pdf

T. Künneke and D. Zimmer, “Schall mittels Pulver dämpfen,” konstruktionspraxis, vol. 6, pp. 24–26, 2019.
LibreCat: /record/22444

I. Gräßler and C. Oleff, “Risikoorientierte Analyse und Handhabung von Anforderungsänderungen,” in Design for X - Beiträge zum 30. DfX-Symposium , 2019, vol. 30, pp. 49–60.
LibreCat: /record/22000
DOI:  10.35199/dfx2019.5

I. Gräßler, C. Oleff, and P. Scholle, “Priorisierung von Anforderungen für die Entwicklung mechatronischer Systeme,” in Fachtagung Mechatronik 2019 Paderborn, 2019, p. S. 1-6.
LibreCat: /record/22001
DOI:  10.17619/UNIPB/1-791

I. Gräßler, H. Thiele, C. Oleff, P. Scholle, and V. Schulze, “Priorisierung von Anforderungen für die Entwicklung mechatronischer Systeme,” in International Conference on Engineering Design (ICE), 2019, pp. 1265–1274.
LibreCat: /record/22002
DOI: 10.17619/UNIPB/1-791

E. Moritzer, J. Wächter, and M. Elsner, “Investigation of the Processability of Different PEEK Materials in the FDM Process with Regard to the Weld Seam Strength,”http://utw10945.utweb.utexas.edu/sites/default/files/2019/074%20Investigation%20of%20The%20Processability%20of%20Different%20P.pdf__in 30th Annual International Solid Freeform Fabrication Symposium, 2019, vol. 30, pp. 856–863, doi:http://utw10945.utweb.utexas.edu/sites/default/files/2019/074%20Investigation%20of%20The%20Processability%20of%20Different%20P.pdf .
LibreCat: /record/22022
DOI: http://utw10945.utweb.utexas.edu/sites/default/files/2019/074%20Investigation%20of%20The%20Processability%20of%20Different%20P.pdf

E. Moritzer, A. Hirsch, H. P. Heim, C. Cherif, and W. Truemper, “Plastic droplet welding: bond strength between plastic freeforming structures and continuous fiber-reinforced thermoplastic composites,”10.1007/s40194-019-00714-3__Welding in the World, vol. 63, pp. 867–873, 2019, doi:10.1007/s40194-019-00714-3 .
LibreCat: /record/22047
DOI: 10.1007/s40194-019-00714-3

E. Moritzer, A. Hirsch, and F. I. Bürenhaus, “Development and Modeling of Design and Process Guidelines for FDM Structures for the Partial Reinforcement of Hybrid Structures,”10.1063/1.5088314__in AIP Conference Proceedings, 2019, vol. 2065, no. 1, doi:10.1063/1.5088314 .
LibreCat: /record/22028
DOI: 10.1063/1.5088314

V. Schöppner, C. Schumacher, and C. Fels, “A Method to Evaluate the Process-Specific Warpage for Different Polymers in the FDM Process,”10.1063/1.5088315__2019, doi:10.1063/1.5088315 .
LibreCat: /record/22027
DOI: 10.1063/1.5088315

E. Moritzer, A. Hirsch, and S. Paulus, Rissausbreitungsmechanismen in FDM-Verstärkungsstrukturen unter dynamischer Beanspruchung. Springer Vieweg, 2019, pp. 185–198.
LibreCat: /record/22026
DOI: 10.1007/978-3-658-27412-2

A. Kruse and M. Mummert, “Mit 3D-Druck umfassende Teilhabe möglich machen ,” Werkstatt:Dialog, no. 4, pp. 34–35, 2019.
LibreCat: /record/36846

S. H. Klippstein, A. Duchting, T. Reiher, F. Hengsbach, D. Menge, and H.-J. Schmid, “Devolopment, Production and post-processing of a topology optimized aircraft bracket ,” in 30th Annual International Solid Freeform Fabrication Symposium, 2019, vol. 30, pp. 1932–1945.
LibreCat: /record/22202

S. Lammers, J. Tominski, and D. Zimmer, “Guidelines for post processing oriented design of additive manufactured parts for use in topology optimization,”http://congress.cimne.com/sim-am2019/frontal/doc/EbookSim-AM2019.pdf__in II International Conference on Simulation for Additive Manufacturing Sim-AM 2019 11-13 September, 2019, 2019, pp. 174–185, doi:http://congress.cimne.com/sim-am2019/frontal/doc/EbookSim-AM2019.pdf .
LibreCat: /record/22441
DOI: http://congress.cimne.com/sim-am2019/frontal/doc/EbookSim-AM2019.pdf

E. Moritzer, A. Hirsch, and F. Hecker, “Process Parameter Optimization to Improve the Mechanical Properties of Arburg Plastic Freeformed Components,”http://dx.doi.org/10.26153/tsw/17308__in 30th Annual International Solid Freeform Fabrication Symposium, 2019, vol. 30, pp. 705–714, doi:http://dx.doi.org/10.26153/tsw/17308 .
LibreCat: /record/22041
DOI: http://dx.doi.org/10.26153/tsw/17308

T. Schafran, B. Schramm, and L. Risse, “Additive Fertigung in der modernen Orthopädietechnik - Anwendung und Forschungsansätze -,” in DVM - AK Implantate und Biostrukturen, 2018.
LibreCat: /record/22116

B. Schramm, L. Risse, J. P. Brüggemann, H. A. Richard, and G. Kullmer, “Additive manufacturing for medical applications,” Journal of 3D Printing in medicine, vol. 2, 2018.
LibreCat: /record/22117

L. Risse, B. Schramm, and T. Schafran, “Welche ingenieurstechnischen Perspektiven bietet die Versorgung durch additiv gefertigte Orthesen?,” in PreDay AK Fußchirurgie, 2018.
LibreCat: /record/22118

C. Kummert and H.-J. Schmid, “The Influence of Contour Scanning Parameters and Strategy on Selective Laser Sintering  Build Part Properties,” in 29th Annual International Solid Freeform Fabrication Symposium, 2018, vol. 29.
LibreCat: /record/22120

J. P. Brüggemann, L. Risse, A. Grübel, H. A. Richard, and G. Kullmer, “Validierung der strukturmechanischen Funktionsfähigkeit durch experimentelle Bauteilprüfungen additiv gefertigter Leichtbaustrukturen,” in DVM - Bericht 250, Arbeitskreis: Bruchmechanische Werkstoff- und Bauteilbewertung: Beanspruchungsanalyse, Prüfmethoden und Anwendungen, Deutscher Verband für Materialforschung und -prüfung e.V., 2018, vol. 250, pp. 89–98.
LibreCat: /record/22122
DOI: 10.1007/978-3-658-27412-2_1

A. Dsuban, J. Lohn, J. P. Brüggemann, and G. Kullmer, “Entwicklung und Umsetzung eines Qualitätssicherungskonzeptes für die additive Fertigung,” in DVM - Bericht 403, Arbeitskreis: Additiv gefertigte Bauteile und Strukturen, Deutscher Verband für Materialforschung und -prüfung e.V., 2018, vol. 403, pp. 110–110.
LibreCat: /record/22125

J. P. Brüggemann, L. Risse, H. A. Richard, and G. Kullmer, “Entwicklung von Optimierungsstrategien unter Ausnutzung des Potentials der additiven Fer-tigung,” in DVM - Bericht 403, Arbeitskreis: Additiv gefertigte Bauteile und Strukturen, Deutscher Verband für Materialforschung und -prüfung e.V., 2018, vol. 403, pp. 11–21.
LibreCat: /record/22126

L. Risse, B. Schramm, J. P. Brüggemann, S. C. Woodcock, G. Kullmer, and H. A. Richard, “CAE-gestützte Optimierung eines Hüftimplantats durch Ausnutzung der Potentiale additiver Fertigungsverfahren,” in DVM-Bericht 403, Arbeitskreis: Additiv gefertigte Bauteile und Strukturen, Deutscher Verband für Materialforschung und -prüfung e.V., 2018, vol. 403, pp. 89–100.
LibreCat: /record/22139

T. D. Joy, J. P. Brüggemann, and G. Kullmer, “Crack Growth Simulation with Adapcrack3D in 3D Structures under the influence of Temperature,” in Procedia Structural Integrity, 2018, p. in press.
LibreCat: /record/22145

J. P. Brüggemann, L. Risse, G. Kullmer, B. Schramm, and H. A. Richard, “Optimization of the fracture mechanical properties of additively manufactured EN AW-7075,” in Procedia Structural Integrity, 2018, p. in press.
LibreCat: /record/22147
DOI: 10.1016/j.prostr.2018.12.052

J. P. Brüggemann, L. Risse, G. Kullmer, and H. A. Richard, “Fracture mechanical investigations on selective laser melted TiAl6,” in Procedia Structural Integrity, 2018, p. in press.
LibreCat: /record/22148
DOI: 10.1016/j.prostr.2018.12.053

L. Risse, B. Schramm, J. P. Brüggemann, G. Kullmer, and H. A. Richard, “Entwicklung von steifigkeitsangepassten, lasergeschmolzenen Kurzschaft-Hüftendoprothesen,” in Proceedings of the 15th Rapid.Tech Conference, 2018, pp. 405–417.
LibreCat: /record/22150

D. Menge, P. Delfs, M. Töws, and H.-J. Schmid, “Topology Optimized Heat Transfer Using the Example of an Electronic Housing,” in 29th Annual International Solid Freeform Fabrication Symposium, 2018, vol. 29, pp. 687–697.
LibreCat: /record/22183

C. Kummert, S. Josupeit, and H.-J. Schmid, “Thermoplastic Elastomer Part Color as Function of Temperature Histories and Oxygen Atmosphere During Selective Laser Sinterung,” Journal of Minerals, Metals and Materials Society, vol. 70, no. 3, pp. 425–430, 2018.
LibreCat: /record/22196
DOI: 10.1007/s11837-017-2658-2

S. Urbanek et al., “Additive Manufacturing of a Soft Magnetic Rotor Active Part and Shaft for a Permanent Magnet Synchronous Machine,” in Conference paper, 2018 IEEE Transportation Electrification Conference and Expo (ITEC), Juni 2018, DOI: 10.1109/ITEC.2018.8450250, 2018.
LibreCat: /record/22430

J. Tominski and S. Lammers, “Software-assisted design check of additive manufactured components,” in 14th PERMAS Users’ Conference, 2018, vol. 14.
LibreCat: /record/22433
DOI: https://www.semanticscholar.org/paper/METHOD-FOR-A-SOFTWARE-BASED-DESIGN-CHECK-OF-Tominski-Lammers/83e141f55b33041ade5e661958b449047d6f026e#extracted

J. Tominski, S. Lammers, C. Wulf, and D. Zimmer, “Method for a Software-based Design Check of Additively Manufactured Components,” in 29th Annual International Solid Freeform Fabrication Symposium, 2018, vol. 29.
LibreCat: /record/22434
DOI: http://utw10945.utweb.utexas.edu/sites/default/files/2018/006%20MethodforaSoftwareBasedDesignCheckofAdditi.pdf

T. Künneke, S. Bücker, T. Lieneke, and D. Zimmer, “Ein Beitrag zur Anpassung bestehender Konstruktionsmethodiken an die additiven Fertigungsverfahren,” in Proceedings of the 15th Rapid.Tech Conference, 2018, pp. 128–143.
LibreCat: /record/22435
DOI: 10.3139/9783446458123.008

A. Jacob et al., “Iterative Produktentwicklung und Produktionsplanung für die Additive Fertigung,” ZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb, vol. 113, no. 11, pp. 742–745, 2018.
LibreCat: /record/22436
DOI: https://doi.org/10.3139/104.112005

U. Brückner, T. Künneke, M. H. Schadomsky, M. Strop, and D. Zimmer, Elektromechanische Antriebe. Carl Hanser Verlag, 2018, pp. 247–290.
LibreCat: /record/22506
DOI: 10.3139/9783446456198.009