Reschetnik, W., et al. “Beeinflussung Des Risswachstums Durch Kerben in Additiv Gefertigten Strukturen.” Additive Fertigung von Bauteilen Und Strukturen – Neue Erkenntnisse Und Praxisbeispiele.

Riemer, A., et al. Optimierung der Werkstoffperformance lasergeschmolzener metallischer Werkstoffe.

Adam, Guido, and Detmar Zimmer. “Konstruktionsregeln Für Additive Fertigung in Lehre Und Forschung.”https://www.researchgate.net/publication/274193188_Konstruktionsregeln_fur_additive_Fertigung_in_Lehre_und_Forschung __Newsletter Berliner Kreis, vol. 15, 2010, pp. 22–23, doi:https://www.researchgate.net/publication/274193188_Konstruktionsregeln_fur_additive_Fertigung_in_Lehre_und_Forschung .

Bagsik, A., et al. “FDM Part Quality Manufactured with ULTEM 9085.”https://docplayer.net/255735-Fdm-part-quality-manufactured-with-ultem-9085.html__Proceedings of International Conference Polymeric Materials, 2010, doi:https://docplayer.net/255735-Fdm-part-quality-manufactured-with-ultem-9085.html.

Rüsenberg, Stefan, et al. “Mechanical and Physical Properties - A Way to Asses Quality of Laser Sintered Parts.”http://utw10945.utweb.utexas.edu/Manuscripts/2011/2011-19-Ruesenberg.pdf__22th Annual International Solid Freeform Fabrication Symposium, vol. 22, 2011, pp. 239–51, doi:http://utw10945.utweb.utexas.edu/Manuscripts/2011/2011-19-Ruesenberg.pdf.

Rüsenberg, Stefan, et al. Porosity as a Key to Increase Material Properties of Laser Sintered Parts. 2011, pp. 531–38, doi:10.1201/b11341.

Adam, Guido, and Detmar Zimmer. Direct Manufacturing Design Rules. CRC Press, 2011, pp. 545–51, doi:10.1201/b11341-88.

Zimmer, Detmar, and Guido Adam. “DMDR Direct Manufacturing Design Rules. Erarbeiten von Applikationsunabhängigen Konstruktionsregeln.” Rapid.Tech 2011 Fachmesse Und Anwendertagung Für Rapid-Technologie, 2011.

Bagsik, A., and Volker Schöppner. “Mechanical Properties of Fused Deposition Modeling Parts Manufactured with ULTEM*9085.”https://www.researchgate.net/profile/Volker_Schoeppner/publication/284341800_Mechanical_properties_of_fused_deposition_modeling_parts_manufactured_with_ULTEMzast9085/links/5c73971b458515831f6cd501/Mechanical-properties-of-fused-deposition-modeling-parts-manufactured-with-ULTEM-zast9085.pdf__ANTEC, 2011, pp. 1294–98, doi:https://www.researchgate.net/profile/Volker_Schoeppner/publication/284341800_Mechanical_properties_of_fused_deposition_modeling_parts_manufactured_with_ULTEMzast9085/links/5c73971b458515831f6cd501/Mechanical-properties-of-fused-deposition-modeling-parts-manufactured-with-ULTEM-zast9085.pdf.

Rüsenberg, Stefan, et al. “Controlling the Quality of Laser Sintered Parts Along the Process Chain.”http://utw10945.utweb.utexas.edu/Manuscripts/2012/2012-78-Ruesenberg.pdf__23rd Annual International Solid Freeform Fabrication Symposium, vol. 23, 2012, pp. 1024–44, doi:http://utw10945.utweb.utexas.edu/Manuscripts/2012/2012-78-Ruesenberg.pdf.

Rüsenberg, Stefan, and Hans-Joachim Schmid. “Mechanical Properties as a Result of Multitude of Parameters.”https://afpr.asso.fr/content/assises/2012/actes/papiers/s5_2.pdf__The European Forum on Additive Manufacturing, vol. 17, 2012, doi:https://afpr.asso.fr/content/assises/2012/actes/papiers/s5_2.pdf.

Adam, Guido, and Detmar Zimmer. Elementbasierte Erarbeitung von Konstruktionsregeln Für Additive Fertigung. 2012.

Lindemann, C., et al. “Analyzing Product Lifecycle Costs for a Better Understanding of Cost Drivers in Additve Manufacturing.”http://utw10945.utweb.utexas.edu/Manuscripts/2012/2012-12-Lindemann.pdf__23rd Annual International Solid Freeform Fabrication Symposium, vol. 23, 2012, pp. 177–88, doi:http://utw10945.utweb.utexas.edu/Manuscripts/2012/2012-12-Lindemann.pdf.

Bagsik, A., et al. “Long-Term Ageing Effects on Fused Deposition Modeling Parts Manufactured with ULTEM*9085.”http://utw10945.utweb.utexas.edu/Manuscripts/2012/2012-48-Bagsik.pdf__23rd Annual International Solid Freeform Fabrication Symposium, vol. 23, 2012, pp. 629–40, doi:http://utw10945.utweb.utexas.edu/Manuscripts/2012/2012-48-Bagsik.pdf.

Bagsik, A., et al. “Tensile and Flexural Properties of Fused Deposition Modeling Parts Manufactured with ULTEM*9085.” 1st International Conference on Thermo-Mechanically Graded Materials, vol. 1, 2012, pp. 129–34.

Bagsik, A., et al. “Extensive Analysis of the Mechanical Strength Properties of Fused Deposition Modeling Parts Manufactured with ULTEM 9085.”https://www.tib.eu/de/suchen/id/TIBKAT%3A756276616__5th International Conference on Polymer and Mould Innovations, vol. 5, Centre for Polymer and Material Technology, Univ. College, Ghent Univ., 2012, pp. 266–72, doi:https://www.tib.eu/de/suchen/id/TIBKAT%3A756276616.

Josupeit, Stefan, et al. “A Material-Based Quality Concept for Polymer Laser Sintering.”http://utw10945.utweb.utexas.edu/Manuscripts/2013/2013-03-Josupeit.pdf__24th Annual International Solid Freeform Fabrication Symposium , vol. 24, 2013, pp. 44–54, doi:http://utw10945.utweb.utexas.edu/Manuscripts/2013/2013-03-Josupeit.pdf.

Rüsenberg, Stefan, and Hans-Joachim Schmid. “Advanced Characterization Method of Nylon 12 Materials for Application in Laser Sinter Processing.”10.1063/1.4873877__International Conference of the Polymer-Processing-Society (PPS), vol. 29, 2013, doi:10.1063/1.4873877.

Josupeit, Stefan, et al. “Mechanische Und Rheologische Untersuchungen Neuer Laser Sinter Materialien.”https://www.rp-netzwerk.de/images/stories/pdf/rapid_7/Universitaet_Paderborn_DMRC_RP-Forum2013.pdf__Merseburger Rapid Prototyping Forum, vol. 7, 2013, doi:https://www.rp-netzwerk.de/images/stories/pdf/rapid_7/Universitaet_Paderborn_DMRC_RP-Forum2013.pdf.

Rüsenberg, Stefan, et al. “Additiv versus Konventionell: Benchmarking Am Beispiel Eines Designs Aus Der Luftfahrtindustrie.” RapidTech, 2013.

Adam, Guido, and Detmar Zimmer. Design for Additive Manufacturing. 2013.

Adam, Guido, and Detmar Zimmer. “Konstruktionsregeln Für Additive Fertigungsverfahren .”https://www.researchgate.net/publication/274190643_Konstruktionsregeln_fur_additive_Fertigungsverfahren __Konstruktion, vol. 7, no. 8, 2013, pp. 77–82, doi:https://www.researchgate.net/publication/274190643_Konstruktionsregeln_fur_additive_Fertigungsverfahren .

Adam, Guido. Die Potentiale Additiver Fertigung Nutzen. 2013.

Adam, Guido. Konstruktionsregeln Für Additive Fertigungsverfahren - Ausbildung, Lehre. 2013.

Lindemann, C., et al. “Impact and Influence Factors of Additive Manufacturing on Product Lifecycle Costs.”http://utw10945.utweb.utexas.edu/Manuscripts/2013/2013-79-Lindemann.pdf__24th Annual International Solid Freeform Fabrication Symposium, vol. 24, 2013, pp. 998–1008, doi:http://utw10945.utweb.utexas.edu/Manuscripts/2013/2013-79-Lindemann.pdf.

Fischer, M., and Volker Schöppner. “Some Investigations Regarding the Surface Treatment of Ultem 9085 Parts Manufactured with Fused Deposition Modeling.”http://utw10945.utweb.utexas.edu/Manuscripts/2013/2013-64-Fischer.pdf__24th Annual International Solid Freeform Fabrication Symposium, vol. 24, 2013, pp. 805–15, doi:http://utw10945.utweb.utexas.edu/Manuscripts/2013/2013-64-Fischer.pdf.

Delfs, Patrick, et al. “Simulation of the Surface Topography on Laser Sintered Polymer Parts.”http://utw10945.utweb.utexas.edu/sites/default/files/2014-098-Delfs.pdf__25th Annual International Solid Freeform Fabrication Symposium, vol. 25, 2014, pp. 1250–58, doi:http://utw10945.utweb.utexas.edu/sites/default/files/2014-098-Delfs.pdf.

Josupeit, Stefan, and Hans-Joachim Schmid. “Three-Dimensional in-Process Temperature Measurement of Laser Sintered Part Cakes.”http://utw10945.utweb.utexas.edu/sites/default/files/2014-006-Josupeit.pdf__25th Annual International Solid Freeform Fabrication Symposium, vol. 25, 2014, pp. 49–58, doi:http://utw10945.utweb.utexas.edu/sites/default/files/2014-006-Josupeit.pdf.

Josupeit, Stefan, et al. “Thermal Ageing of Polyamide 12 Used for Polymer Laser Sintering - Influence on Part Quality Characteristics.”https://www.researchgate.net/publication/283135483_Thermal_ageing_of_polyamide_12_used_for_polymer_laser_sintering_-_Influence_on_part_quality_characteristics__72nd Annual Technical Conference of the Society of Plastics Engineers (ANTEC 2014), vol. 72, no. 3, 2014, pp. 2383–85, doi:https://www.researchgate.net/publication/283135483_Thermal_ageing_of_polyamide_12_used_for_polymer_laser_sintering_-_Influence_on_part_quality_characteristics.

Rüsenberg, Stefan, et al. “A Method to Characterize the Quality of a Polymer Laser Sintering Process .”10.1155/2014/185374__Advances in Mechanical Engineering, vol. 6, SAGE Publications, 2014, pp. 1687–8140, doi:10.1155/2014/185374.

Josupeit, Stefan, et al. “Development of a Basic Model to Simulate the Laser Sintering Cooling Process.”https://www.researchgate.net/profile/Saeed_Khademzadeh2/publication/303022441_Geometrical_characterization_of_thin_walls_produced_by_micro_laser_sintering/links/5735cc7f08ae298602e08f1f/Geometrical-characterization-of-thin-walls-produced-by-micro-laser-sintering.pdf__International Conference on Additive Technologies, vol. 5, 2014, pp. 222–27, doi:https://www.researchgate.net/profile/Saeed_Khademzadeh2/publication/303022441_Geometrical_characterization_of_thin_walls_produced_by_micro_laser_sintering/links/5735cc7f08ae298602e08f1f/Geometrical-characterization-of-thin-walls-produced-by-micro-laser-sintering.pdf.

Delfs, Patrick, and Hans-Joachim Schmid. “Simulation of the Surface Topography on Laser Sintered Polymer Parts.”http://utw10945.utweb.utexas.edu/sites/default/files/2014-098-Delfs.pdf__25th Annual International Solid Freeform Fabrication Symposium, vol. 25, 2014, pp. 1250–58, doi:http://utw10945.utweb.utexas.edu/sites/default/files/2014-098-Delfs.pdf.

Adam, Guido, and Detmar Zimmer. “Extension of Prior Developed Design Rules (LS).”https://www.researchgate.net/publication/274193378_Extension_of_prior_developed_design_rules%27_range_of_validity_for_different_boundary_conditions_in_laser_sintering __ASPE - Spring Topical Meeting 2014, 2014, doi:https://www.researchgate.net/publication/274193378_Extension_of_prior_developed_design_rules%27_range_of_validity_for_different_boundary_conditions_in_laser_sintering .

Adam, Guido, and Detmar Zimmer. Systematic Investigations of Minimum Feature Sizes and Geometrical Accuracies. 2014.

Adam, Guido, and Detmar Zimmer. “Design for Additive Manufacturing - Element Transitions and Aggregated Structures.”10.1016/j.cirpj.2013.10.001 __CIRP Journal of Manufacturing Science and Technology, vol. 7, no. 1, 2014, pp. 20–28, doi:10.1016/j.cirpj.2013.10.001 .

Adam, Guido. Erweiterung Des Gültigkeitsbereichs von Konstruktionsregeln Beim Lasersintern. 2014.

Adam, Guido. Extension of Prior Developed Design Rules for Laser Sintering. 2014.

Deppe, G., and R. Koch. “Exploring the Influence of an Additive Manufacturing Integration on Future MRO Processes in Aeronautics.”https://www.rtejournal.de/ausgabe11/3958__Rtejournal, vol. 2014, no. 11, 2014, doi:https://www.rtejournal.de/ausgabe11/3958.

Fischer, M., and Volker Schöppner. “Finishing of ABS-M30 Parts Manufactured with Fused Deposition Modeling with Focus on Dimensional Accuracy.”http://utw10945.utweb.utexas.edu/sites/default/files/2014-073-Fischer.pdf__25th Annual International Solid Freeform Fabrication Symposium, vol. 25, 2014, pp. 923–34, doi:http://utw10945.utweb.utexas.edu/sites/default/files/2014-073-Fischer.pdf.

Fischer, M., and Volker Schöppner. “Effects of a Mass Finishing Process on Parts Produced from Ultem 9085 by Fused Deposition Modeling.” ANTEC, SPE: Society of Plastics Engineers, 2014, pp. 2331–36.

Bagsik, A., et al. “Mechanical Analysis of Lightweight Constructions Manufactured with Fused Deposition Modeling.”10.1063/1.4873874__29th International Conference of the Polymer Processing Society, vol. 29, American Institute of Physics , 2014, pp. 696–701, doi:10.1063/1.4873874.

Leuders, Stefan, et al. “On the Fatigue Properties of Metals Manufactured by Selective Laser Melting – The Role of Ductility.”10.1557/jmr.2014.157__Journal of Materials Research, 2014, pp. 1911–19, doi:10.1557/jmr.2014.157.

Reschetnik, W., et al. “Einsatz Additiver Fertigung Zur Optimierung Des Ermüdungsverhaltens von Gekerbten Strukturen.” DVM - Tagung - Additiv Gefertigte Bauteile Und Strukturen, Deutscher Verband Für Materialforschung Und -Prüfung e.V., 2015, pp. 63–72.

Klemp, E. “Industrial Applications in AM - Aerospace and Overhaul.” ASME AM3D Conference and Expo, 2015.

Klemp, E. “Paradigmenwechsel Mit Additiven Fertigungsverfahren - Möglichkeiten Und Chancen.” Generatives Fertigen Und 3D-Drucken: Industrielle Revolution Oder Hype? Wissenschaftliches Kolloquium, 2015.

Klemp, E. “Möglichkeiten, Chancen Und Mythen Additiver Fertigung.” Hanse-Aerospace-Themennachmittag Im Hause SLM, 2015.

Klemp, E. “Additive Manufacturing - Potenziale, Zukunftschancen Und Hürden.” Messe Interzum, 2015.

Klemp, E. “Technology Update 2015 for Metals.” SLM-Usermeeting, 2015.

Klemp, E. “AM-Verfahren - Möglichkeiten in Der Industriellen Fertigung.” VDMA - Symposium Auf Der Hannover Messe Industrie, 2015.

Delfs, Patrick, et al. “Mass Finishing of Laser Sintered Parts.”http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-41-Delfs.pdf__26th Annual International Solid Freeform Fabrication Symposium, vol. 26, 2015, pp. 514–26, doi:http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-41-Delfs.pdf.

Josupeit, Stefan, and Hans-Joachim Schmid. “Temperature History within Laser Sintered Part Cakes and Its Influence on Process Quality.”http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-15-Josupeit.pdf__26th Annual International Solid Freeform Fabrication Symposium, vol. 26, 2015, pp. 190–99, doi:http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-15-Josupeit.pdf.

Josupeit, Stefan, et al. “Material Properties of Laser Sintered Polyamide 12 as Function of Build Cycles Using Low Refresh Rates.”http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-43-Josupeit.pdf__26th Annual International Solid Freeform Fabrication Symposium, vol. 26, 2015, pp. 540–49, doi:http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-43-Josupeit.pdf.

Delfs, Patrick, et al. “Surface Roughness Optimized Alignment of Parts for Additive Manufacturing Processes.”http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-107-Delfs.pdf__26th Annual International Solid Freeform Fabrication Symposium, vol. 26, 2015, pp. 1334–44, doi:http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-107-Delfs.pdf.

Josupeit, Stefan, et al. “Powder Ageing and Material Properties of Laser Sintered Polyamide 12 Using Low Refresh Rates.”10.1007/978-3-662-48473-9_5__Proceedings of the Rapid Tech 2015, Springer Vieweg, 2015, pp. 63–78, doi:10.1007/978-3-662-48473-9_5.

dell’Aere, Guido, and Detmar Zimmer. “On Design for Additive Manufacturing - Evaluating Geometrical Limitations.”10.1108/RPJ-06-2013-0060__Rapid Prototyping Journal, vol. 21, no. 6, Emerald Group Publishing Limited, 2015, pp. 662–70, doi:10.1108/RPJ-06-2013-0060.

Lieneke, Tobias, et al. “Entwicklung Einer Methode Zur Systematischen Erarbeitung von Maßtoleranzen Für Additive Fertigungsverfahren.” Proceedings of the Rapid Tech 2015, 2015.

Lieneke, Tobias, et al. “Systematical Determination of Tolerances for Additive Manufacturing by Measuring Linear Dimensions.”https://www.researchgate.net/publication/316827402_Systematical_Determination_of_Tolerances_for_Additive_Manufacturing_by_Measuring_Linear_Dimensions__26th Annual International Solid Freeform Fabrication Symposium, vol. 26, 2015, pp. 371–84, doi:https://www.researchgate.net/publication/316827402_Systematical_Determination_of_Tolerances_for_Additive_Manufacturing_by_Measuring_Linear_Dimensions.

Adam, Guido. “On Tolerances for Additive Manufacturing.” Inside 3D Printing Conference and Expo, 2015.

Lieneke, Tobias. “Entwicklung Einer Methode Zur Systematischen Erarbeitung von Maßtoleranzen Für Additive Fertigungsverfahren.” Rapid Tech 2015, 2015.

Lieneke, Tobias. “Systematical Determination of Dimensional Tolerances for Additive Manufacturing .” 26th Annual International Solid Freeform Fabrication Symposium, vol. 26, 2015.

Lindemann, C., et al. “Towards a Sustainable and Economic Selection of Part Candidates for Additive Manufacturing.”https://doi.org/10.1108/RPJ-12-2014-0179__Rapid Prototyping Journal, vol. 21, no. 2, Emerald, 2015, pp. 216–27, doi:https://doi.org/10.1108/RPJ-12-2014-0179.

Deppe, G., et al. “Developement of an Economic Decision Support for the Application of Additive Manufacturing in Aerospace.”http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-125-Deppe.pdf__26th Annual International Solid Freeform Fabrication Symposium, vol. 26, 2015, pp. 1560–63, doi:http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-125-Deppe.pdf.

Jahnke, U., et al. “Protection Measures against Product Piracy and Application by the Use of AM.”http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-128-Jahnke.pdf__26th Annual International Solid Freeform Fabrication Symposium, vol. 26, 2015, pp. 1601–11, doi:http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-128-Jahnke.pdf.

Reiher, T., and R. Koch. “FE-Optimization and Data Handling for Additive Manufacturing of Structural Parts.”http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-90-Reiher.pdf__26th Annual International Solid Freeform Fabrication Symposium, vol. 26, 2015, pp. 1092–103, doi:http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-90-Reiher.pdf.

Jahnke, U., and C. Lindemann. “Sustainable Part Selection for the Use of Additive Manufacturing in Companies Focussing on Prevention of Product Piracy.” Inside 3D Printing Conference and Expo, 2015.

Deppe, G., et al. “Exploring the Cost and Lifetime Benefits of a Topology Optimized Aerospace Part Applying Additive Manufacturing.”https://www.th-owl.de/elsa/download/335/336/PEM_Tagung_zusammen2015.pdf__International Conference Production Engineering and Management 2015, vol. 5, 2015, pp. 219–30, doi:https://www.th-owl.de/elsa/download/335/336/PEM_Tagung_zusammen2015.pdf.

Lindemann, C., et al. “Guidelines for a Sustainable and Economic Selection of Part Candidates for Space Applications Using Additive Manufacturing.” Paris Space Week, 2015.

Knoop, F., and Volker Schöppner. “Analysis and Optimization of the Dimensional Accuracy for FDM Parts Manufactured with ABS-M30.”https://www.researchgate.net/publication/283735736_Analysis_and_optimization_of_the_dimensional_accuracy_for_FDM_parts_manufactured_with_ABS-M30__ASPE Spring Topical Meeting, 2015, pp. 26–31, doi:https://www.researchgate.net/publication/283735736_Analysis_and_optimization_of_the_dimensional_accuracy_for_FDM_parts_manufactured_with_ABS-M30.

Knoop, F., and Volker Schöppner. “Mechanical and Thermal Properties of FDM Parts Manufactured with Polyamide 12.”http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-77-Knoop.pdf__26th Annual International Solid Freeform Fabrication Symposium, vol. 26, 2015, pp. 935–48, doi:http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-77-Knoop.pdf.

Brüggemann, J. P., et al. “Festigkeits- Und Leichtbauoptimierte Konstruktion Und Auslegung Eines Additiv Gefertigten Fahrradvorbaus.”10.3139/9783446450608.025__Rapid Tech - International Trade Show &; Conference for Additive Manufacturing, 2016, pp. 290–300, doi:10.3139/9783446450608.025.

Reschetnik, W., et al. Fatigue Life Manipulation of SLM Parts. 2016.

Brüggemann, J. P., et al. “Optimierung von Fahrradtretkurbeln Mittels Additiver Fertigung.” DVM - Tagung - Additiv Gefertigte Bauteile Und Strukturen, Deutscher Verband Für Materialforschung Und -Prüfung e.V., 2016, pp. 101–12.

Reschetnik, W., et al. “Lebensdauerbeeinflussung Durch Additive Fertigung.” DVM - Tagung - Additiv Gefertigte Bauteile Und Strukturen, Deutscher Verband Für Materialforschung Und -Prüfung e.V., 2016, pp. 131–40.

Riemer, A., et al. “Materialkennwerte Lasergeschmolzener Werkstoffe.” DVM - Tagung - Additiv Gefertigte Bauteile Und Strukturen, Deutscher Verband Für Materialforschung Und -Prüfung e.V., 2016, pp. 161–74.

Reschetnik, W., et al. “Fatigue Crack Growth Behavior and Mechanical Properties of Additively Processed EN AW-7075 Aluminium Alloy.” Procedia Structural Integrity, 2016, pp. 3040–48.

Riemer, A., and H. A. Richard. “Crack Propagation in Additive Manufactured Materials and Structures.” Procedia Structural Integrity, 2016, pp. 1229–36.

Josupeit, Stefan, et al. “Manufacturability and Mechanical Characterization of Laser Sintered Lattice Structures.”http://utw10945.utweb.utexas.edu/sites/default/files/2016/166-Josupeit.pdf__27th Annual International Solid Freeform Fabrication Symposium , vol. 27, 2016, pp. 2077–86, doi:http://utw10945.utweb.utexas.edu/sites/default/files/2016/166-Josupeit.pdf.

Delfs, Patrick, et al. “Optimized Build Orientation of Additive Manufactured Parts for Improved Surface Quality and Build Time.”10.1016/j.addma.2016.06.003__Additive Manufacturing, vol. 2, no. 12, Part B, Elsevier, 2016, pp. 214–320, doi:10.1016/j.addma.2016.06.003.

Delfs, Patrick, and Hans-Joachim Schmid. “Extended Analysis of the Surface Topography of Laser Sintered Polymer Parts .”https://www.bookshop.fraunhofer.de/buch/fraunhofer-direct-digital-manufacturing-conference-ddmc-2016/245111#__Fraunhofer Direct Digital Manufacturing Conference, vol. 3, 2016, pp. 411–14, doi:https://www.bookshop.fraunhofer.de/buch/fraunhofer-direct-digital-manufacturing-conference-ddmc-2016/245111#.

Josupeit, Stefan, and Hans-Joachim Schmid. “Thermal Properties of Polyamide 12 Powder for Application in Laser Sintering.” International Congress on Particle Technology (PARTEC) , 2016.

Josupeit, Stefan, et al. “Dimensional Accuracy of Polymer Laser Sintered Parts: Influences and Measures.”10.3139/9783446450608.009__Rapid Tech - International Trade Show &; Conference for Additive Manufacturing , 2016, pp. 107–20, doi:10.3139/9783446450608.009.

Künneke, Thomas, and Detmar Zimmer. “Funktionsintegration Additiv Gefertigter Dämpfungsstrukturen Bei Biegeschwingungen.” DVM Tagung - Additiv Gefertigte Bauteile Und Strukturen, 2016, pp. 151–60.

Lammers, Stefan, et al. “Additive Manufacturing of a Lightweight Rotor for a Permanent Magnet Synchronous Machine.”10.1109/EDPC.2016.7851312__EDPC 2016, 2016, doi:10.1109/EDPC.2016.7851312.

Josupeit, Stefan, et al. “Influences on the Dimensional Accuracy of Laser Sintered Parts along the Process Chain.” 27th Annual International Solid Freeform Fabrication Symposium , 2016.

Lieneke, Tobias, et al. “Dimensional Tolerances for Additive Manufacturing: Experimental Investigation of Manufacturing Accuracy for Selective Laser Melting.” ASPE 2016 Summer Topical Meeting, 2016, p. S.9-15.

Knoop, Frederick, et al. “Reproducibility of the Dimensional Accuracy - Investigations for FDM.”10.3139/9783446454606.004__ASPE Spring Topical Meeting, 2016, p. S.3-8, doi:10.3139/9783446454606.004.

Knoop, Frederick, et al. “Reproducibility of the Dimensional Accuracy - Investigations for FDM.” Summer Topical Meeting 2016, 2016.

Lieneke, Tobias, et al. “Dimensional Tolerances for Additive Manufacturing: Experimental Investigation for Fused Deposition Modeling.”10.1016/j.procir.2016.02.361__CAT 2016, vol. 43, 2016, pp. 286–91, doi:10.1016/j.procir.2016.02.361.

Deppe, G., and R. Koch. “Supporting the Decision Process for Applying Additive Manufacturing in the MRO Aerospace Business by MADM.”http://utw10945.utweb.utexas.edu/sites/default/files/2016/006-Deppe.pdf__27th Annual International Solid Freeform Fabrication Symposium , vol. 27, 2016, pp. 81–92, doi:http://utw10945.utweb.utexas.edu/sites/default/files/2016/006-Deppe.pdf.

Reiher, T., and R. Koch. “Product Optimization with and for Additive Manufacturing.”http://utw10945.utweb.utexas.edu/sites/default/files/2016/179-Reiher.pdf__27th Annual International Solid Freeform Fabrication Symposium , vol. 27, 2016, pp. 2236–49, doi:http://utw10945.utweb.utexas.edu/sites/default/files/2016/179-Reiher.pdf.

Lindemann, C., and R. Koch. “Cost Efficient Design and Planning for Additive Manufacturing Technologies.”http://utw10945.utweb.utexas.edu/sites/default/files/2016/007-Lindemann.pdf__27th Annual International Solid Freeform Fabrication Symposium , vol. 27, 2016, pp. 93–112, doi:http://utw10945.utweb.utexas.edu/sites/default/files/2016/007-Lindemann.pdf.

Lindemann, C., et al. Scenario Based Outlook of Additive Manufacturing Applications for the Aerospace Market. Metropolis Verlag, 2016.

Jahnke, U., and R. Koch. Prevention of Product Piracy - Potentials of Additive Manufacturing. Metropolis Verlag, 2016.

Reiher, T., et al. “Combining Material Efficiency and Part Reliability by Product Optimization Applying Additive Manufacturing.”https://www.th-owl.de/elsa/download/333/334/PEM_2016_Proceeding_2016_09_14_Inhaltsnavigation.pdf__International Conference Production Engineering and Management 2016, vol. 6, 2016, pp. 27–38, doi:https://www.th-owl.de/elsa/download/333/334/PEM_2016_Proceeding_2016_09_14_Inhaltsnavigation.pdf.

Deppe, G., and R. Koch. “Unterstützung Des AM Entscheidungsprozesses in Der Luftfahrtersatzteilversorgung.”https://doi.org/10.3139/9783446450608.031__Rapid Tech 2016, vol. 13, Hanser Verlag, 2016, pp. 349–60, doi:https://doi.org/10.3139/9783446450608.031.

Gräßler, I., et al. “Data Management for Additive Manufacturing: Survey on Requirements and Current State.”https://www.designsociety.org/publication/38831/DATA+MANAGEMENT+FOR+ADDITIVE+MANUFACTURING%3A+SURVEY+ON+REQUIREMENTS+AND+CURRENT+STATE__14th International DESIGN Conference 2016, vol. 14, 2016, doi:https://www.designsociety.org/publication/38831/DATA+MANAGEMENT+FOR+ADDITIVE+MANUFACTURING%3A+SURVEY+ON+REQUIREMENTS+AND+CURRENT+STATE.

Fischer, M., and Volker Schöppner. “Fatigue Behavior of FDM Parts Manufactured with Ultem 9085.”10.1007/s11837-016-2197-2__27th Annual International Solid Freeform Fabrication Symposium , vol. 27, 2016, pp. 563–568, doi:10.1007/s11837-016-2197-2.

Moritzer, Elmar, et al. “Universelle Mikrobearbeitungsplaffform Und Basistechnologien Für Das Fertigen Und Markieren Mikrophysiologischer Systeme.” 6. Dresdner Medizintechnik-Symposium, Biomedizinische Technik - Interdisziplinär, Integrativ Und Innovativ, vol. 6, 2016, pp. 65–70.

Fischer, M., et al. “Chemical Surface Treatment of Ultem 9085 Parts.”10.3139/9783446450608.010__Rapid Tech - International Trade Show &; Conference for Additive Manufacturing, Carl Hanser Verlag GmbH &; Co. KG, 2016, pp. 121–33, doi:10.3139/9783446450608.010.

Hickmann, T., et al. “Neue Prototypen-Werkzeugtechnologie für Bipolarplatten und Batteriekomponenten.” Der Stahlformenbauer , no. 5, Technischer Fachverlag Möller, 2016.