Moritzer, Elmar, and Christian Lennart Elsner. “Evaluation of the Influence of Particle Type, Shape and Size on the Thermal Conductivity of Filled Polymers in the Fused Filament Fabrication Process,” 2024.

Rüther, Moritz Johannes, Sven Helge Klippstein, SathishKumar Ponusamy, Torben Rüther, and Hans-Joachim Schmid. “Flowability of Polymer Powders at Elevated Temperatures for Additive Manufacturing.”https://doi.org/10.1016/j.powtec.2023.118460__Powder Technology 422 (2023).https://doi.org/10.1016/j.powtec.2023.118460 .

Haase, Michael, Maximilian Bieber, Frederik Tasche, Mirko Schaper, Kay-Peter Hoyer, Bernd Ponik, and Balázs Magyar. “Umsetzung einer optimierten Oberflächenschlitzung zur Wirbelstromverlustreduktion auf der Oberfläche eines additiv gefertigten Permanentmagnet-Rotors.” In Proceedings of the 19th Rapid.Tech 3D Conference Erfurt, Germany, 9–11 May 2023, edited by Michael Kynast, Michael Eichmann, and Gerd Witt. München: Carl Hanser Verlag GmbH &; Co. KG, 2023.

Andreiev, Anatolii, Kay-Peter Hoyer, Florian Hengsbach, Michael Haase, Lennart Tasche, Kristina Duschik, and Mirko Schaper. “Powder Bed Fusion of Soft-Magnetic Iron-Based Alloys with High Silicon Content.”https://doi.org/10.1016/j.jmatprotec.2023.117991__Journal of Materials Processing Technology 317 (2023).https://doi.org/10.1016/j.jmatprotec.2023.117991 .

Kletetzka, Ivo, Maren Kosanke, Dennis Meinderink, Vanessa Neßlinger, Guido Grundmeier, and Hans-Joachim Schmid. “Influence of the Filler–Matrix Adhesion and the Effects of Conditioning on Tensile Properties of Laser-Sintered Parts Built with Polyamide–Glass Bead Dry Blends.”https://doi.org/10.1007/s40964-023-00501-z__Progress in Additive Manufacturing, 2023.https://doi.org/10.1007/s40964-023-00501-z .

Klippstein, Sven Helge, Ivo Kletetzka, Ilknur Sural, and Hans-Joachim Schmid. “Influence of a Prolonged Shelf Time on P Laser Sintering Powder and Resulting Part Properties.”https://doi.org/10.1007/s00170-023-11243-1__The International Journal of Advanced Manufacturing Technology , 2023.https://doi.org/10.1007/s00170-023-11243-1 .

Kletetzka, Ivo, Fabian Neitzel, and Hans-Joachim Schmid. “Assessing the Impact of the Powder Production Method on Ceramic-Filled Polyamide Composites Made by Laser Sintering.” In Proceedings of the 34th Annual International Solid Freeform Fabrication Symposium, edited by Joseph Beaman, Vol. 34. Austin: Laboratory for Freeform Fabrication and University of Texas, 2023.

Koers, Thorsten, and Balázs Magyar. “Compensation of the Shrinkage Behavior Occurring in Cylindrical Components in the FDM Process.”https://doi.org/10.1002/masy.202200185__In Macromolecular Symposia, edited by Giuseppe Lamanna and Constantin Opran, Vol. 411. Wiley, 2023.https://doi.org/10.1002/masy.202200185 .

Bieber, Maximilian, Michael Haase, Frederik Tasche, Alexander Zibart, and Bernd Ponick. “Additively Manufactured Air-Cooled Lightweight Rotor for an Automotive Electric Motor.”https://doi.org/10.1109/iemdc55163.2023.10238918__In 2023 IEEE International Electric Machines &;amp; Drives Conference (IEMDC). IEEE, 2023.https://doi.org/10.1109/iemdc55163.2023.10238918 .

Bödger, Christian, Stefan Gnaase, Dennis Lehnert, and Thomas Tröster. “Investigation of the Influence of Process Parameters on Productivity in the LPBF Process for the Material Inconel 718.” In Proceedings of the 34th Annual International Solid Freeform Fabrication Symposium – An Additive Manufacturing Conference, 2023.

Moritzer, Elmar, and Felix Hecker. “Adaptive Scaling of Components in the Fused Deposition Modeling Process.”https://doi.org/10.1002/masy.202200181__Macromolecular Symposia 411, no. 1 (2023).https://doi.org/10.1002/masy.202200181 .

Moritzer, Elmar, Felix Hecker, Felix Knaup, and Julian Wächter. “Investigation of the Deposition Velocity Related Temperature Deviations for High Temperature Materials in the FDM Process.”https://doi.org/10.1063/5.0168548__In Proceedings of the 37th International Conference of the Polymer Processing Society (PPS-37), 170001-1-170001–5. Fukuoka (Japan): AIP Publishing, 2023.https://doi.org/10.1063/5.0168548 .

Koers, Thorsten, and Balázs Magyar. “Determination and Compensation of the Shrinkage Behavior of Cylindrical Elements in the FDM Process.” In Proceedings of the 34th Annual International Solid Freeform Fabrication Symposium 2023, edited by Joseph Beaman, Vol. 34, 2023.

Lammers, Stefan, Thorsten Koers, Balázs Magyar, Detmar Zimmer, and Tobias Lieneke. “Depiction of Support Structures in Technical Drawings.” In Proceedings of the 34th Annual International Solid Freeform Fabrication Symposium 2023, edited by Joseph Beaman, Vol. 34, 2023.

Kletetzka, Ivo, Fabian Neitzel, and Hans-Joachim Schmid. “Assessing the Impact of the Powder Production Method on Ceramic-Filled Polyamide Composites Made by Laser Sintering.”https://doi.org/10.26153/tsw/50931__In Proceedings of the 34th Annual International Solid Freeform Fabrication Symposium, edited by Joseph Beaman. Laboratory for Freeform Fabrication and University of Texas, Austin, 2023.https://doi.org/10.26153/tsw/50931 .

Neitzel, Fabian, Ivo Kletetzka, and Hans-Joachim Schmid. “Halogen-Free Flame Retardant Powder Materials for Laser Sintering: Evaluation and Process Stability Analysis.”https://doi.org/10.26153/tsw/50926__In Proceedings of the 34th Annual International Solid Freeform Fabrication Symposium, edited by Joseph Beaman. Laboratory for Freeform Fabrication and University of Texas, Austin, 2023.https://doi.org/10.26153/tsw/50926 .

Moritzer, Elmar, and Christian Lennart Elsner. “Investigation and Improvement of Processing Parameters of a Copper-Filled Polymer Filament in Fused Filament Fabrication as a Basis for the Fabrication of Low-Porosity Metal Parts.”https://doi.org/10.1002/masy.202100390__Macromolecular Symposia 404, no. 1 (2022).https://doi.org/10.1002/masy.202100390 .

Moritzer, Elmar, and Julian Wächter. “Development of a Procedure for the Assessment of Material Potentials under Consideration of the Weld Seam Quality for Multi-Material Applications in the FDM Process.”https://doi.org/10.1002/masy.202100389__Macromolecular Symposia 404, no. 1 (2022).https://doi.org/10.1002/masy.202100389 .

Moritzer, Elmar, and Christine Driediger. “Reactive Direct Bonding of Digital Light Process Components.”https://doi.org/10.1002/masy.202100396__Macromolecular Symposia 404, no. 1 (2022).https://doi.org/10.1002/masy.202100396 .

Rüther, Moritz Johannes, Sven Helge Klippstein, SathishKumar Ponusamy, Steffen Jesinghausen, and Hans-Joachim Schmid. “Innovative Werkstoffherstellung für das Polymer Laser Sintern – Teil 2.” Werkstoffe 6 (2022): 18–19.

Rüther, Moritz Johannes, Sven Helge Klippstein, SathishKumar Ponusamy, Steffen Jesinghausen, and Hans-Joachim Schmid. “Innovative Werkstoffherstellung für das Polymer Laser Sintern – Teil 1.” Werkstoffe 5 (2022): 28–29.

Haase, Michael, and Detmar Zimmer. “Systematic Investigations Concerning Eddy Currents in Additively Manufactured Structures.”https://doi.org/10.1007/978-3-031-05918-6_10__In Innovative Product Development by Additive Manufacturing 2021. Cham: Springer International Publishing, 2022.https://doi.org/10.1007/978-3-031-05918-6_10 .

Klippstein, Sven Helge, Florian Heiny, Nagaraju Pashikanti, Monika Gessler, and Hans-Joachim Schmid. “Powder Spread Process Monitoring in Polymer Laser Sintering and Its Influences on Part Properties.”https://doi.org/10.1007/s11837-021-05042-w __JOM - The Journal of The Minerals, Metals &; Materials Society (TMS) 74 (2022): 1149–1157.https://doi.org/10.1007/s11837-021-05042-w  .

Klippstein, Sven Helge, and Hans-Joachim Schmid. “Powder Spread Flaws in Polymer Laser Sintering and Its Influences on Mechanical Performance.” In Proceedings of the 33nd Annual International Solid Freeform Fabrication Symposium. Austin, TX, USA, 2022.

Moritzer, Elmar, and Felix Hecker. “VALIDATION AND COMPARISON OF FEM-SIMULATION RESULTS OF THE FUSED DEPOSITION MODELING PROCESS UNDER CONSIDERATION OF DIFFERENT MESH RESOLUTIONS.”https://doi.org/10.26153/tsw/44657__In Proceedings of the 33rd Annual Freeform Fabrication Symposium, edited by David L. Bourell, Joseph J. Beaman, Richard H. Crawford, Desiderio Kovar, Carolyn C. Seepersad, and Mehran Tehrani, 2011–18, 2022.https://doi.org/10.26153/tsw/44657 .

Kletetzka, Ivo, Roland Gawlikowicz, and Hans-Joachim Schmid. “Effects of Spherical Fillers on the Processability and Mechanical Properties ofhttp://dx.doi.org/10.26153/tsw/44558__and PP-Based LS Dry Blends.”http://dx.doi.org/10.26153/tsw/44558__In Proceedings of the 33th Annual International Solid Freeform Fabrication Symposium, Vol. 33. Austin: Laboratory for Freeform Fabrication and University of Texas, 2022.http://dx.doi.org/10.26153/tsw/44558 .

Kletetzka, Ivo, Sven Helge Klippstein, and Hans-Joachim Schmid. “Shelf Life of Polyamide 12 () Laser Sintering Powder.”http://dx.doi.org/10.26153/tsw/44555__In Proceedings of the 33th Annual International Solid Freeform Fabrication Symposium, Vol. 33. Austin: Laboratory for Freeform Fabrication and University of Texas, 2022.http://dx.doi.org/10.26153/tsw/44555 .

Bödger, Christian, Christian Weiss, Ekkehard Schiefer, Daniel Heussen, and Constantin Haefner. “Evaluation of the Ecological Footprint for Parts from AlSi10Mg Manufactured by Laser Powder Bed Fusion.” In Proceedings of the 33rd Annual International Solid Freeform Fabrication Symposium – An Additive Manufacturing Conference, 2022.

Moritzer, Elmar, and Felix Hecker. “INVESTIGATION OF THE PROCESS PARAMETERS AND GEOMETRY DEPENDENT SHRINKAGE BEHAVIOR OF RASTER LINES IN THE FUSED DEPOSITION MODELING PROCESS.”https://doi.org/10.26153/tsw/44654__In Proceedings of the 33rd Annual Freeform Fabrication Symposium, edited by David L. Bourell, Joseph J. Beaman, Richard H. Crawford, Desiderio Kovar, Carolyn C. Seepersad, and Mehran Tehrani, 1844–58, 2022.https://doi.org/10.26153/tsw/44654 .

Heiland, Steffen, Benjamin Milkereit, Kay-Peter Hoyer, Evgeny Zhuravlev, Olaf Keßler, and Mirko Schaper. “Requirements for Processing High-Strength AlZnMgCu Alloys with PBF-LB/M to Achieve Crack-Free and Dense Parts.”https://doi.org/10.3390/ma14237190__Materials, 2021.https://doi.org/10.3390/ma14237190 .

Moritzer, Elmar, and Julian Wächter. “Einfluss eines beheizten Bauraums auf die Schweißnahtqualität.” Plastverarbeiter, no. 04 (2021): 30–32.

Zhuravlev, Evgeny, Benjamin Milkereit, Bin Yang, Steffen Heiland, Pascal Vieth, Markus Voigt, Mirko Schaper, Guido Grundmeier, Christoph Schick, and Olaf Kessler. “Assessment of AlZnMgCu Alloy Powder Modification for Crack-Free Laser Powder Bed Fusion by Differential Fast Scanning Calorimetry.”https://doi.org/10.1016/j.matdes.2021.109677__Materials &; Design, 2021.https://doi.org/10.1016/j.matdes.2021.109677 .

Künneke, Thomas, and Detmar Zimmer. “Konstruktionsregeln Für Additiv Gefertigte Partikeldämpfer/Design Rules for Additive Manufactured Particle Dampers.”https://doi.org/10.37544/0720-5953-2021-11-12-72__Konstruktion, 2021, 72–78.https://doi.org/10.37544/0720-5953-2021-11-12-72 .

Lammers, Stefan, Anne Kruse, Jan Gierse, Johannes Tominski, and Christian-Friedrich Lindemann. “Konstruktionsrichtlinien in der Produktentwicklung.” In Mehrzieloptimierte und durchgängig automatisierte Bauteilentwicklung für Additive Fertigungsverfahren im Produktentstehungsprozess, edited by Rainer Koch, Detmar Zimmer, Thomas Tröster, and Iris Gräßler, 2021.

Menge, Dennis, and Hans-Joachim Schmid. “Low Temperature Laser Sintering on a Standard System: First Attempts and Results with P,” 2021.

Nickchen, Tobias, Stefan Heindorf, and Gregor Engels. “Generating Physically Sound Training Data for Image Recognition of Additively Manufactured Parts.” In Proceedings of the IEEE/CVF Winter Conference on Applications of Computer Vision, 1994–2002, 2021.

Magerkohl, Sebastian, Detmar Zimmer, Lennart Tasche, Mirko Schaper, Stefan Urbanek, and Bernd Ponick. “Funktionsoptimierte AM-Gestaltung Eines E-Rotors.” Antriebstechnik - Zeitschrift Für Konstruktion, Entwicklung Und Anwendung von Antrieben Und Steuerungen  60, no. 6 (2021): 36–43.

Zimmer, Detmar, Thorsten Koers, and Tobias Bührmann. “Zukunftstechnologie Und Moderne Antriebe Kombiniert: AM in Modularen Antriebssystemen.” Newsletter Der Wissenschaftlichen Gesellschaft Für Produktentwicklung 1 (2021): 9–10.

Moritzer, Elmar, Felix Hecker, Christian Lennart Elsner, and André Hirsch. “Influences of Temperature-Dependent Boundary Conditions on Component Properties in Arburg Plastic Freeforming.” In Proceedings of  36th Annual Meeting of Polymer Processing Society (PPS-36). Conference Proceedings, n.d.

Moritzer, Elmar, André Hirsch, and C. Dalmer. Investigation of Plastic Freeformed, Open-Pored Structures with Regard to Producibility, Reproducibility and Liquid Permeability. Springer, 2021.https://doi.org/10.1007/978-3-030-54334-1 .

Moritzer, Elmar, Julian Wächter, and Christian Lennart Elsner. “Investigation of Specific FDM Process Parameters to Optimize the Polymer Discharge of Carbon Fiber Reinforced PEEK.”https://doi.org/10.1002/masy.202000269__Macromolecular Symposia 395, no. 1 (2021).https://doi.org/10.1002/masy.202000269 .

Moritzer, Elmar, and Christian Schumacher. “Stainless Steel Parts Produced by Fused Deposition Modeling and a Sintering Process Compared to Components Manufactured in Selective Laser Melting.”https://doi.org/10.1002/masy.202000275__Macromolecular Symposia 395, no. 1 (2021).https://doi.org/10.1002/masy.202000275 .

Moritzer, Elmar, Christian Lennart Elsner, Julian Wächter, and Frederick Knoop. “Investigation and Realization of Watertight FDM Structures Made of Ultem 9085 in Pressurized Systems.” In 79th Annual Technical Conference of the Society of Plastics Engineers (ANTEC), 2021.

Moritzer, Elmar, Christian Lennart Elsner, and Christian Schumacher. “Investigation of MetalPolymer Composites Manufactured by Fused Deposition Modeling with Regard to Process Parameters.”https://doi.org/10.1002/pc.26285__Polymer Composites 42, no. 11 (2021): 6065–79.https://doi.org/10.1002/pc.26285 .

Kruse, Anne, Manuel Ott, Lena Risse, and Rainer Koch. “D-Druck - Eine Technologie als Schlüssel zur Steigerung der Teilhabe.”https://doi.org/10.48447/Add-2021-016__Additiv gefertigte Bauteile und Strukturen. Deutscher Verband für Materialforschung und -prüfung e.V., 2021.https://doi.org/10.48447/Add-2021-016 .

Moritzer, Elmar, Felix Hecker, Christian Lennart Elsner, and André Hirsch. “Investigations for the Optimization of Visual and Geometrical Properties of Arburg Plastic Freeforming Components.”https://doi.org/10.26153/tsw/17567__In Proceedings: 2021 Annual International Solid Freeform Fabrication Symposium (SFF Symp 2021), edited by David Bourell, 467–74, 2021.https://doi.org/10.26153/tsw/17567 .

Moritzer, Elmar, Felix Hecker, Christine Driediger, and André Hirsch. “Comparison of Component Properties and Economic Efficiency of the Arburg Plastic Freeforming and Fused Deposition Modeling.”https://doi.org/10.26153/tsw/17577__In Proceedings: 2021 Annual International Solid Freeform Fabrication Symposium (SFF Symp 2021), edited by David Bourell, 575–84, 2021.https://doi.org/10.26153/tsw/17577 .

Moritzer, Elmar, Felix Hecker, and André Hirsch. “Investigation and Modeling of the Residence Time Dependent Material Degradation in the Arburg Plastic Freeforming.”https://doi.org/10.26153/tsw/17643__In Proceedings: 2021 Annual International Solid Freeform Fabrication Symposium (SFF Symp 2021), edited by David Bourell, 1268–75, 2021.https://doi.org/10.26153/tsw/17643 .

Kletetzka, Ivo, Christina Kummert, and Hans-Joachim Schmid. “Laser Sintering Design Guidelines for Media Transmitting Components.”http://dx.doi.org/10.26153/tsw/17548__In Proceedings of the 32nd Annual International Solid Freeform Fabrication Symposium, Vol. 32. Austin: Laboratory for Freeform Fabrication and University of Texas, 2021.http://dx.doi.org/10.26153/tsw/17548 .

Nickchen, Tobias, Gregor Engels, and Johannes Lohn. “Opportunities of 3D Machine Learning for Manufacturability Analysis and Component Recognition in the Additive Manufacturing Process Chain.”https://doi.org/10.1007/978-3-030-54334-1_4__In Industrializing Additive Manufacturing. Cham, 2020.https://doi.org/10.1007/978-3-030-54334-1_4 .

Brüggemann, J.P., L. Risse, S.C. Woodcock, T.D. Joy, J. Neumann, J. Vidner , G. Kullmer, and H.A. Richard. “Strukturoptimierung Einer Messradkomponente Zur Realitätsnäheren Erfassung von Fahrzeuglastdaten Und Bruchmechanische Bewertung.” In DVM-Bericht 252, Arbeitskreis: Bruchmechanische Werkstoff- Und Bauteilbewertung: Beanspruchungsanalyse, Prüfmethoden Und Anwendungen, Deutscher Verband Für Materialforschung Und -Prüfung e.V., Vol. 252, 2020.

Brüggemann, J.P., L. Risse, S.C. Woodcock, G. Kullmer, and H.A. Richard. “Einsatz von Topologieoptimierungssoftware - Der Ersatz Für Den Ingenieur?” In DVM-Bericht 405, Arbeitskreis: Additiv Gefertigte Bauteile Und Strukturen, Deutscher Verband Für Materialforschung Und -Prüfung e.V., Vol. 405, 2020.

Risse, L., and G. Kullmer. “Implementierung Additiver Fertigungsverfahren in Den Chirurgischen Arbeitsablauf.” In DVM-Bericht 405, Arbeitskreis: Additiv Gefertigte Bauteile Und Strukturen, Deutscher Verband Für Materialforschung Und -Prüfung e.V., Vol. 405, 2020.

Kummert, Christina, Wolfgang Diekmann, Katrin Tews, and Hans-Joachim Schmid. “Influence of Part Microstructure on Mechanicl Properties of PX Laser Sintered Specimens.”http://utw10945.utweb.utexas.edu/sites/default/files/2019/063%20Influence%20of%20Part%20Microstructure%20on%20Mechanical%20Pro.pdf__In 29th Annual International Solid Freeform Fabrication Symposium, 29:735–44, 2020.http://utw10945.utweb.utexas.edu/sites/default/files/2019/063%20Influence%20of%20Part%20Microstructure%20on%20Mechanical%20Pro.pdf .

Claes, Leander, Elmar Baumhögger, Torben Rüther, Jan Gierse, Thomas Tröster, and Bernd Henning. “Reduction of Systematic Measurement Deviation in Acoustic Absorption Measurement Systems.” In Fortschritte Der Akustik - DAGA 2020, 1077–80, 2020.

Brüggemann, J.P., L. Risse, G. Kullmer, and H.A. Richard. Entwicklung von Optimierungsstrategien Für Strukturbauteile Unter Ausnutzung Der Potentiale Des Laser-Strahlschmelzens. Additive Fertigung von Bauteilen Und Strukturen – Neue Erkenntnisse Und Praxisbeispiele, 2019.

Risse, L., S.C. Woodcock, G. Kullmer, B. Schramm, and H.A. Richard. Einsatz ingenieurmäßiger Methoden zur Lösung chirurgischer Herausforderungen, 2019.

Risse, L., and B. Schramm. “Möglichkeiten Additiver Fertigungsverfahren Im Zuge Der Digitalisierung Für Den Planungsprozess Chirurgischer Eingriffe.” In DVM - Bericht 1685, DVM-Tag 2019 – Bauteil Verstehen, 1685:103–20, 2019.

Brüggemann, J.P., L. Risse, H.A. Richard, and G. Kullmer. “Einflussfaktoren Auf Bauteilgüte Lasergeschmolzener Strukturen.” In DVM - Bericht 251, Arbeitskreis: Bruchmechanische Werkstoff- Und Bauteilbewertung: Beanspruchungsanalyse, Prüfmethoden Und Anwendungen, Deutscher Verband Für Materialforschung Und -Prüfung e.V., 251:207–18, 2019.

Woodcock, S.C., L. Risse, G. Kullmer, and H.A. Richard. “Bewertung von Verschieden Gearteten Gitterstrukturen in Bezug Auf Ihre Einsatzfähigkeit in Bandscheibenimplantaten.” In DVM - Bericht 404, Arbeitskreis: Additiv Gefertigte Bauteile Und Strukturen, Deutscher Verband Für Materialforschung Und -Prüfung e.V., 404:151–62, 2019.

Brüggemann, J.P., L. Risse, H.A. Richard, and G. Kullmer. “Einflussfaktoren Auf Bauteilgüte Lasergeschmolzener Strukturen.” In DVM-Bericht 251, Arbeitskreis: Bruchmechanische Werkstoff- Und Bauteilbewertung: Beanspruchungsanalyse, Prüfmethoden Und Anwendungen, Deutscher Verband Für Materialforschung Und -Prüfung e.V., 251:207–18, 2019.

Risse, L., S.C. Woodcock, G. Kullmer, B. Schramm, F. Schlenker, and H.A. Richard. “Potentiale Des Einsatzes Individueller, Additiv Gefertigter Medizinischer Hilfsmittel.” In DVM-Bericht 404, Arbeitskreis: Additiv Gefertigte Bauteile Und Strukturen, 404:139–50, 2019.

Brüggemann, J.P., L. Risse, S.C. Woodcock, T. Duffe, J. Neumann, J. Vidner, G. Kullmer, and H.A. Richard. “Strukturoptimierung Durch Den Einsatz Des Laser-Strahlschmelzprozesses Zur Realitätsnäheren Erfassung von Fahrzeug-Lastdaten.” In DVM-Bericht 404, Arbeitskreis: Additiv Gefertigte Bauteile Und Strukturen, Deutscher Verband Für Materialforschung Und -Prüfung e.V., 404:69–82, 2019.

Risse, L., S.C. Woodcock, G. Kullmer, B. Schramm, and H.A. Richard. “Reconstruction of a Defective Finger Joint Surface and Development of an Adapted External Fixator.” In Lecture Notes in Computational Vision and Biomechanics , 230–38, 2019.

Klippstein, Sven Helge, and Hans-Joachim Schmid. “Methodik Zur Qualifizierung Des Lasersinter Prozesses Für Die Serienfertigung.”https://doi.org/10.3139/9783446462441.025__In Proceedings of the 16th Rapid.Tech Conference, 2019.https://doi.org/10.3139/9783446462441.025 .

Künneke, Thomas, Tobias Lieneke, Stefan Lammers, and Detmar Zimmer. “Design Guidelines for Post-Processing of Laser Beam Melting in Context of Support Structures.”https://www.euspen.eu/knowledge-base/AM19127.pdf__In Proceedings of the Special Interest Group Meeting on Advancing Precision in Additive Manufacturing, 137–40, 2019.https://www.euspen.eu/knowledge-base/AM19127.pdf .

Lieneke, Tobias, Thomas Künneke, Fabian Schlenker, Vera Denzer, and Detmar Zimmer. “Manufacturing Accuracy In Additive Manufacturing: A Method To Determine Geometrical Tolerances.”https://www.euspen.eu/knowledge-base/AM19129.pdf__In Special Interest Group Meeting: Advancing Precision in Additive Manufacturing, 2019.https://www.euspen.eu/knowledge-base/AM19129.pdf .

Künneke, Thomas, and Detmar Zimmer. “Schall Mittels Pulver Dämpfen.” Konstruktionspraxis 6 (2019): 24–26.

Gräßler, I., and C. Oleff. “Risikoorientierte Analyse Und Handhabung von Anforderungsänderungen.”https://doi.org/ 10.35199/dfx2019.5__In Design for X - Beiträge Zum 30. DfX-Symposium , 30:49–60, 2019.https://doi.org/ 10.35199/dfx2019.5 .

Gräßler, I., C. Oleff, and P. Scholle. “Priorisierung von Anforderungen Für Die Entwicklung Mechatronischer Systeme.”https://doi.org/ 10.17619/UNIPB/1-791__In Fachtagung Mechatronik 2019 Paderborn, S. 1-6, 2019.https://doi.org/ 10.17619/UNIPB/1-791 .

Gräßler, I., H. Thiele, C. Oleff, P. Scholle, and V. Schulze. “Priorisierung von Anforderungen Für Die Entwicklung Mechatronischer Systeme.”https://doi.org/10.17619/UNIPB/1-791__In International Conference on Engineering Design (ICE), 1265–74, 2019.https://doi.org/10.17619/UNIPB/1-791 .

Moritzer, Elmar, Julian Wächter, and M. Elsner. “Investigation of the Processability of Different PEEK Materials in the FDM Process with Regard to the Weld Seam Strength.”http://utw10945.utweb.utexas.edu/sites/default/files/2019/074%20Investigation%20of%20The%20Processability%20of%20Different%20P.pdf__In 30th Annual International Solid Freeform Fabrication Symposium, 30:856–63, 2019.http://utw10945.utweb.utexas.edu/sites/default/files/2019/074%20Investigation%20of%20The%20Processability%20of%20Different%20P.pdf .

Moritzer, Elmar, André Hirsch, H.P. Heim, C. Cherif, and W. Truemper. “Plastic Droplet Welding: Bond Strength between Plastic Freeforming Structures and Continuous Fiber-Reinforced Thermoplastic Composites.”https://doi.org/10.1007/s40194-019-00714-3__Welding in the World 63 (2019): 867–73.https://doi.org/10.1007/s40194-019-00714-3 .

Moritzer, Elmar, André Hirsch, and Franziska Isabelle Bürenhaus. “Development and Modeling of Design and Process Guidelines for FDM Structures for the Partial Reinforcement of Hybrid Structures.”https://doi.org/10.1063/1.5088314__In AIP Conference Proceedings, Vol. 2065. AIP Publishing, 2019.https://doi.org/10.1063/1.5088314 .

Schöppner, Volker, C. Schumacher, and C. Fels. “A Method to Evaluate the Process-Specific Warpage for Different Polymers in the FDM Process.”https://doi.org/10.1063/1.5088315__In AIP Conference Proceedings. AIP Publishing, 2019.https://doi.org/10.1063/1.5088315 .

Moritzer, Elmar, André Hirsch, and S. Paulus. Rissausbreitungsmechanismen in FDM-Verstärkungsstrukturen Unter Dynamischer Beanspruchung. Springer Vieweg, 2019.https://doi.org/10.1007/978-3-658-27412-2 .

Kruse, Anne, and Michael Mummert. “Mit 3D-Druck umfassende Teilhabe möglich machen .” Werkstatt:Dialog, no. 4 (2019): 34–35.

Klippstein, Sven Helge, Anne Duchting, Thomas Reiher, F. Hengsbach, Dennis Menge, and Hans-Joachim Schmid. “Devolopment, Production and Post-Processing of a Topology Optimized Aircraft Bracket .” In 30th Annual International Solid Freeform Fabrication Symposium, 30:1932–45, 2019.

Lammers, Stefan, Johannes Tominski, and Detmar Zimmer. “Guidelines for Post Processing Oriented Design of Additive Manufactured Parts for Use in Topology Optimization.”http://congress.cimne.com/sim-am2019/frontal/doc/EbookSim-AM2019.pdf__In II International Conference on Simulation for Additive Manufacturing Sim-AM 2019 11-13 September, 2019, 174–85, 2019.http://congress.cimne.com/sim-am2019/frontal/doc/EbookSim-AM2019.pdf .

Moritzer, Elmar, André Hirsch, and Felix Hecker. “Process Parameter Optimization to Improve the Mechanical Properties of Arburg Plastic Freeformed Components.”http://dx.doi.org/10.26153/tsw/17308__In 30th Annual International Solid Freeform Fabrication Symposium, 30:705–14, 2019.http://dx.doi.org/10.26153/tsw/17308 .

Schafran, T., B. Schramm, and L. Risse. “Additive Fertigung in Der Modernen Orthopädietechnik - Anwendung Und Forschungsansätze -.” In DVM - AK Implantate Und Biostrukturen, 2018.

Schramm, B., L. Risse, J.P. Brüggemann, H.A. Richard, and G. Kullmer. “Additive Manufacturing for Medical Applications.” Journal of 3D Printing in Medicine 2 (2018).

Risse, L., B. Schramm, and T. Schafran. “Welche Ingenieurstechnischen Perspektiven Bietet Die Versorgung Durch Additiv Gefertigte Orthesen?” In PreDay AK Fußchirurgie, 2018.

Kummert, C., and H.-J. Schmid. “The Influence of Contour Scanning Parameters and Strategy on Selective Laser Sintering  Build Part Properties.” In 29th Annual International Solid Freeform Fabrication Symposium, Vol. 29, 2018.

Brüggemann, J.P., L. Risse, A. Grübel, H.A. Richard, and G. Kullmer. “Validierung Der Strukturmechanischen Funktionsfähigkeit Durch Experimentelle Bauteilprüfungen Additiv Gefertigter Leichtbaustrukturen.”https://doi.org/10.1007/978-3-658-27412-2_1__In DVM - Bericht 250, Arbeitskreis: Bruchmechanische Werkstoff- Und Bauteilbewertung: Beanspruchungsanalyse, Prüfmethoden Und Anwendungen, Deutscher Verband Für Materialforschung Und -Prüfung e.V., 250:89–98, 2018.https://doi.org/10.1007/978-3-658-27412-2_1 .

Dsuban, A., J. Lohn, J.P. Brüggemann, and G. Kullmer. “Entwicklung Und Umsetzung Eines Qualitätssicherungskonzeptes Für Die Additive Fertigung.” In DVM - Bericht 403, Arbeitskreis: Additiv Gefertigte Bauteile Und Strukturen, Deutscher Verband Für Materialforschung Und -Prüfung e.V., 403:110–110, 2018.

Brüggemann, J.P., L. Risse, H.A. Richard, and G. Kullmer. “Entwicklung von Optimierungsstrategien Unter Ausnutzung Des Potentials Der Additiven Fer-Tigung.” In DVM - Bericht 403, Arbeitskreis: Additiv Gefertigte Bauteile Und Strukturen, Deutscher Verband Für Materialforschung Und -Prüfung e.V., 403:11–21, 2018.

Risse, L., B. Schramm, J.P. Brüggemann, S.C. Woodcock, G. Kullmer, and H.A. Richard. “CAE-Gestützte Optimierung Eines Hüftimplantats Durch Ausnutzung Der Potentiale Additiver Fertigungsverfahren.” In DVM-Bericht 403, Arbeitskreis: Additiv Gefertigte Bauteile Und Strukturen, Deutscher Verband Für Materialforschung Und -Prüfung e.V., 403:89–100, 2018.

Joy, T.D., J.P. Brüggemann, and G. Kullmer. “Crack Growth Simulation with Adapcrack3D in 3D Structures under the Influence of Temperature.” In Procedia Structural Integrity, in press, 2018.

Brüggemann, J.P., L. Risse, G. Kullmer, B. Schramm, and H.A. Richard. “Optimization of the Fracture Mechanical Properties of Additively Manufactured EN AW-7075.”https://doi.org/10.1016/j.prostr.2018.12.052__In Procedia Structural Integrity, in press, 2018.https://doi.org/10.1016/j.prostr.2018.12.052 .

Brüggemann, J.P., L. Risse, G. Kullmer, and H.A. Richard. “Fracture Mechanical Investigations on Selective Laser Melted TiAl6.”https://doi.org/10.1016/j.prostr.2018.12.053__In Procedia Structural Integrity, in press, 2018.https://doi.org/10.1016/j.prostr.2018.12.053 .

Risse, L., B. Schramm, J.P. Brüggemann, G. Kullmer, and H.A. Richard. “Entwicklung von Steifigkeitsangepassten, Lasergeschmolzenen Kurzschaft-Hüftendoprothesen.” In Proceedings of the 15th Rapid.Tech Conference, 405–17, 2018.

Menge, Dennis, Patrick Delfs, Marcel Töws, and Hans-Joachim Schmid. “Topology Optimized Heat Transfer Using the Example of an Electronic Housing.” In 29th Annual International Solid Freeform Fabrication Symposium, 29:687–97, 2018.

Kummert, Christina, Stefan Josupeit, and Hans-Joachim Schmid. “Thermoplastic Elastomer Part Color as Function of Temperature Histories and Oxygen Atmosphere During Selective Laser Sinterung.”https://doi.org/10.1007/s11837-017-2658-2__Journal of Minerals, Metals and Materials Society 70, no. 3 (2018): 425–30.https://doi.org/10.1007/s11837-017-2658-2 .

Urbanek, Stefan, Bernd Ponick, Alexander Taube, Kay-Peter Hoyer, Mirko Schaper, Stefan Lammers, Tobias Lieneke, and Detmar Zimmer. “Additive Manufacturing of a Soft Magnetic Rotor Active Part and Shaft for a Permanent Magnet Synchronous Machine.” In Conference Paper, 2018 IEEE Transportation Electrification Conference and Expo (ITEC), Juni 2018, DOI: 10.1109/ITEC.2018.8450250, 2018.

Tominski, Johannes, and Stefan Lammers. “Software-Assisted Design Check of Additive Manufactured Components.”https://www.semanticscholar.org/paper/METHOD-FOR-A-SOFTWARE-BASED-DESIGN-CHECK-OF-Tominski-Lammers/83e141f55b33041ade5e661958b449047d6f026e#extracted__In 14th PERMAS Users’ Conference, Vol. 14, 2018.https://www.semanticscholar.org/paper/METHOD-FOR-A-SOFTWARE-BASED-DESIGN-CHECK-OF-Tominski-Lammers/83e141f55b33041ade5e661958b449047d6f026e#extracted .

Tominski, Johannes, Stefan Lammers, Christian Wulf, and Detmar Zimmer. “Method for a Software-Based Design Check of Additively Manufactured Components.”http://utw10945.utweb.utexas.edu/sites/default/files/2018/006%20MethodforaSoftwareBasedDesignCheckofAdditi.pdf__In 29th Annual International Solid Freeform Fabrication Symposium, Vol. 29, 2018.http://utw10945.utweb.utexas.edu/sites/default/files/2018/006%20MethodforaSoftwareBasedDesignCheckofAdditi.pdf .

Künneke, Thomas, Sonja Bücker, Tobias Lieneke, and Detmar Zimmer. “Ein Beitrag Zur Anpassung Bestehender Konstruktionsmethodiken an Die Additiven Fertigungsverfahren.”https://doi.org/10.3139/9783446458123.008__In Proceedings of the 15th Rapid.Tech Conference, 128–43. Carl Hanser Verlag GmbH &; Co. KG, 2018.https://doi.org/10.3139/9783446458123.008 .

Jacob, Alexander, Thomas Künneke, Tobias Lieneke, Tobias Baumann, Nicole Stricker, Detmar Zimmer, and Gisela Lanza. “Iterative Produktentwicklung Und Produktionsplanung Für Die Additive Fertigung.”https://doi.org/10.3139/104.112005__ZWF Zeitschrift Für Wirtschaftlichen Fabrikbetrieb 113, no. 11 (2018): 742–45.https://doi.org/10.3139/104.112005 .

Brückner, Uwe, Thomas Künneke, Magnus Hubert Schadomsky, Malte Strop, and Detmar Zimmer. Elektromechanische Antriebe. Carl Hanser Verlag, 2018.https://doi.org/10.3139/9783446456198.009 .