Brüggemann, J. P., et al. “Festigkeits- Und Leichtbauoptimierte Konstruktion Und Auslegung Eines Additiv Gefertigten Fahrradvorbaus.”10.3139/9783446450608.025__Rapid Tech - International Trade Show &; Conference for Additive Manufacturing, 2016, pp. 290–300, doi:10.3139/9783446450608.025.
LibreCat: /record/22107
DOI: 10.3139/9783446450608.025

Reschetnik, W., et al. Fatigue Life Manipulation of SLM Parts. 2016.
LibreCat: /record/22109

Brüggemann, J. P., et al. “Optimierung von Fahrradtretkurbeln Mittels Additiver Fertigung.” DVM - Tagung - Additiv Gefertigte Bauteile Und Strukturen, Deutscher Verband Für Materialforschung Und -Prüfung e.V., 2016, pp. 101–12.
LibreCat: /record/22128

Reschetnik, W., et al. “Lebensdauerbeeinflussung Durch Additive Fertigung.” DVM - Tagung - Additiv Gefertigte Bauteile Und Strukturen, Deutscher Verband Für Materialforschung Und -Prüfung e.V., 2016, pp. 131–40.
LibreCat: /record/22130

Riemer, A., et al. “Materialkennwerte Lasergeschmolzener Werkstoffe.” DVM - Tagung - Additiv Gefertigte Bauteile Und Strukturen, Deutscher Verband Für Materialforschung Und -Prüfung e.V., 2016, pp. 161–74.
LibreCat: /record/22132

Reschetnik, W., et al. “Fatigue Crack Growth Behavior and Mechanical Properties of Additively Processed EN AW-7075 Aluminium Alloy.” Procedia Structural Integrity, 2016, pp. 3040–48.
LibreCat: /record/22146

Riemer, A., and H. A. Richard. “Crack Propagation in Additive Manufactured Materials and Structures.” Procedia Structural Integrity, 2016, pp. 1229–36.
LibreCat: /record/22149

Josupeit, Stefan, et al. “Manufacturability and Mechanical Characterization of Laser Sintered Lattice Structures.”http://utw10945.utweb.utexas.edu/sites/default/files/2016/166-Josupeit.pdf__27th Annual International Solid Freeform Fabrication Symposium , vol. 27, 2016, pp. 2077–86, doi:http://utw10945.utweb.utexas.edu/sites/default/files/2016/166-Josupeit.pdf.
LibreCat: /record/22180
DOI: http://utw10945.utweb.utexas.edu/sites/default/files/2016/166-Josupeit.pdf

Delfs, Patrick, et al. “Optimized Build Orientation of Additive Manufactured Parts for Improved Surface Quality and Build Time.”10.1016/j.addma.2016.06.003__Additive Manufacturing, vol. 2, no. 12, Part B, Elsevier, 2016, pp. 214–320, doi:10.1016/j.addma.2016.06.003.
LibreCat: /record/22185
DOI: 10.1016/j.addma.2016.06.003

Delfs, Patrick, and Hans-Joachim Schmid. “Extended Analysis of the Surface Topography of Laser Sintered Polymer Parts .”https://www.bookshop.fraunhofer.de/buch/fraunhofer-direct-digital-manufacturing-conference-ddmc-2016/245111#__Fraunhofer Direct Digital Manufacturing Conference, vol. 3, 2016, pp. 411–14, doi:https://www.bookshop.fraunhofer.de/buch/fraunhofer-direct-digital-manufacturing-conference-ddmc-2016/245111#.
LibreCat: /record/22190
DOI: https://www.bookshop.fraunhofer.de/buch/fraunhofer-direct-digital-manufacturing-conference-ddmc-2016/245111#

Josupeit, Stefan, and Hans-Joachim Schmid. “Thermal Properties of Polyamide 12 Powder for Application in Laser Sintering.” International Congress on Particle Technology (PARTEC) , 2016.
LibreCat: /record/22194

Josupeit, Stefan, et al. “Dimensional Accuracy of Polymer Laser Sintered Parts: Influences and Measures.”10.3139/9783446450608.009__Rapid Tech - International Trade Show &; Conference for Additive Manufacturing , 2016, pp. 107–20, doi:10.3139/9783446450608.009.
LibreCat: /record/22200
DOI: 10.3139/9783446450608.009

Künneke, Thomas, and Detmar Zimmer. “Funktionsintegration Additiv Gefertigter Dämpfungsstrukturen Bei Biegeschwingungen.” DVM Tagung - Additiv Gefertigte Bauteile Und Strukturen, 2016, pp. 151–60.
LibreCat: /record/22403

Lammers, Stefan, et al. “Additive Manufacturing of a Lightweight Rotor for a Permanent Magnet Synchronous Machine.”10.1109/EDPC.2016.7851312__EDPC 2016, 2016, doi:10.1109/EDPC.2016.7851312.
LibreCat: /record/22404
DOI: 10.1109/EDPC.2016.7851312

Josupeit, Stefan, et al. “Influences on the Dimensional Accuracy of Laser Sintered Parts along the Process Chain.” 27th Annual International Solid Freeform Fabrication Symposium , 2016.
LibreCat: /record/22408

Lieneke, Tobias, et al. “Dimensional Tolerances for Additive Manufacturing: Experimental Investigation of Manufacturing Accuracy for Selective Laser Melting.” ASPE 2016 Summer Topical Meeting, 2016, p. S.9-15.
LibreCat: /record/22409

Knoop, Frederick, et al. “Reproducibility of the Dimensional Accuracy - Investigations for FDM.”10.3139/9783446454606.004__ASPE Spring Topical Meeting, 2016, p. S.3-8, doi:10.3139/9783446454606.004.
LibreCat: /record/22410
DOI: 10.3139/9783446454606.004

Knoop, Frederick, et al. “Reproducibility of the Dimensional Accuracy - Investigations for FDM.” Summer Topical Meeting 2016, 2016.
LibreCat: /record/22411

Lieneke, Tobias, et al. “Dimensional Tolerances for Additive Manufacturing: Experimental Investigation for Fused Deposition Modeling.”10.1016/j.procir.2016.02.361__CAT 2016, vol. 43, 2016, pp. 286–91, doi:10.1016/j.procir.2016.02.361.
LibreCat: /record/22412
DOI: 10.1016/j.procir.2016.02.361

Deppe, G., and R. Koch. “Supporting the Decision Process for Applying Additive Manufacturing in the MRO Aerospace Business by MADM.”http://utw10945.utweb.utexas.edu/sites/default/files/2016/006-Deppe.pdf__27th Annual International Solid Freeform Fabrication Symposium , vol. 27, 2016, pp. 81–92, doi:http://utw10945.utweb.utexas.edu/sites/default/files/2016/006-Deppe.pdf.
LibreCat: /record/21687
DOI: http://utw10945.utweb.utexas.edu/sites/default/files/2016/006-Deppe.pdf

Reiher, T., and R. Koch. “Product Optimization with and for Additive Manufacturing.”http://utw10945.utweb.utexas.edu/sites/default/files/2016/179-Reiher.pdf__27th Annual International Solid Freeform Fabrication Symposium , vol. 27, 2016, pp. 2236–49, doi:http://utw10945.utweb.utexas.edu/sites/default/files/2016/179-Reiher.pdf.
LibreCat: /record/21688
DOI: http://utw10945.utweb.utexas.edu/sites/default/files/2016/179-Reiher.pdf

Lindemann, C., and R. Koch. “Cost Efficient Design and Planning for Additive Manufacturing Technologies.”http://utw10945.utweb.utexas.edu/sites/default/files/2016/007-Lindemann.pdf__27th Annual International Solid Freeform Fabrication Symposium , vol. 27, 2016, pp. 93–112, doi:http://utw10945.utweb.utexas.edu/sites/default/files/2016/007-Lindemann.pdf.
LibreCat: /record/21689
DOI: http://utw10945.utweb.utexas.edu/sites/default/files/2016/007-Lindemann.pdf

Lindemann, C., et al. Scenario Based Outlook of Additive Manufacturing Applications for the Aerospace Market. Metropolis Verlag, 2016.
LibreCat: /record/21698

Jahnke, U., and R. Koch. Prevention of Product Piracy - Potentials of Additive Manufacturing. Metropolis Verlag, 2016.
LibreCat: /record/21699

Reiher, T., et al. “Combining Material Efficiency and Part Reliability by Product Optimization Applying Additive Manufacturing.”https://www.th-owl.de/elsa/download/333/334/PEM_2016_Proceeding_2016_09_14_Inhaltsnavigation.pdf__International Conference Production Engineering and Management 2016, vol. 6, 2016, pp. 27–38, doi:https://www.th-owl.de/elsa/download/333/334/PEM_2016_Proceeding_2016_09_14_Inhaltsnavigation.pdf.
LibreCat: /record/21702
DOI: https://www.th-owl.de/elsa/download/333/334/PEM_2016_Proceeding_2016_09_14_Inhaltsnavigation.pdf

Deppe, G., and R. Koch. “Unterstützung Des AM Entscheidungsprozesses in Der Luftfahrtersatzteilversorgung.”https://doi.org/10.3139/9783446450608.031__Rapid Tech 2016, vol. 13, Hanser Verlag, 2016, pp. 349–60, doi:https://doi.org/10.3139/9783446450608.031.
LibreCat: /record/21705
DOI: https://doi.org/10.3139/9783446450608.031

Gräßler, I., et al. “Data Management for Additive Manufacturing: Survey on Requirements and Current State.”https://www.designsociety.org/publication/38831/DATA+MANAGEMENT+FOR+ADDITIVE+MANUFACTURING%3A+SURVEY+ON+REQUIREMENTS+AND+CURRENT+STATE__14th International DESIGN Conference 2016, vol. 14, 2016, doi:https://www.designsociety.org/publication/38831/DATA+MANAGEMENT+FOR+ADDITIVE+MANUFACTURING%3A+SURVEY+ON+REQUIREMENTS+AND+CURRENT+STATE.
LibreCat: /record/21997
DOI: https://www.designsociety.org/publication/38831/DATA+MANAGEMENT+FOR+ADDITIVE+MANUFACTURING%3A+SURVEY+ON+REQUIREMENTS+AND+CURRENT+STATE

Fischer, M., and Volker Schöppner. “Fatigue Behavior of FDM Parts Manufactured with Ultem 9085.”10.1007/s11837-016-2197-2__27th Annual International Solid Freeform Fabrication Symposium , vol. 27, 2016, pp. 563–568, doi:10.1007/s11837-016-2197-2.
LibreCat: /record/22019
DOI: 10.1007/s11837-016-2197-2

Moritzer, Elmar, et al. “Universelle Mikrobearbeitungsplaffform Und Basistechnologien Für Das Fertigen Und Markieren Mikrophysiologischer Systeme.” 6. Dresdner Medizintechnik-Symposium, Biomedizinische Technik - Interdisziplinär, Integrativ Und Innovativ, vol. 6, 2016, pp. 65–70.
LibreCat: /record/22025

Fischer, M., et al. “Chemical Surface Treatment of Ultem 9085 Parts.”10.3139/9783446450608.010__Rapid Tech - International Trade Show &; Conference for Additive Manufacturing, Carl Hanser Verlag GmbH &; Co. KG, 2016, pp. 121–33, doi:10.3139/9783446450608.010.
LibreCat: /record/22039
DOI: 10.3139/9783446450608.010

Hickmann, T., et al. “Neue Prototypen-Werkzeugtechnologie für Bipolarplatten und Batteriekomponenten.” Der Stahlformenbauer , no. 5, Technischer Fachverlag Möller, 2016.
LibreCat: /record/16270