Diagnostics of Piezoelectric Bending Actuators Subjected to Varying Operating Conditions
O.K. Aimiyekagbon, A. Bender, T. Hemsel, W. Sextro, Electronics 13 (2024).

Transferability of a discrepancy model for the dynamics of electromagnetic oscillating circuits
M.C. Wohlleben, L. Muth, S. Peitz, W. Sextro, in: Proceedings in Applied Mathematics and Mechanics, Wiley, 2023.

Expert-Informed Hierarchical Diagnostics of Multiple Fault Modes of a Spacecraft Propulsion System
O.K. Aimiyekagbon, A. Löwen, A. Bender, L. Muth, W. Sextro, in: Proceedings of the Asia Pacific Conference of the PHM Society 2023 , 2023.

Influence of Temperature and Pre-Stress on the Piezoelectric Material Behavior of Ring-Shaped Ceramics
C. Scheidemann, T. Hemsel, O. Friesen, L. Claes, W. Sextro, in: 2023.

Influence of Temperature and Pre-Stress on the Piezoelectric Material Behavior of Ring-Shaped Ceramics
C. Scheidemann, T. Hemsel, O. Friesen, L. Claes, W. Sextro, in: 2023.

Experimental Investigation of Bond Formation and Wire Deformation in the Ultrasonic Wire Bonding Process
C. Scheidemann, O.E.C. Hagedorn, T. Hemsel, W. Sextro, in: 2023.

Einfluss der Radhubkinematik auf den Reifenverschleiß
J. Schütte, W. Sextro, in: 20. VDI-Fachtagung Reifen - Fahrwerk - Fahrbahn, VDI Verlag GmbH, 2023, pp. 165–180.

Generation of a Reduced, Representative, Virtual Test Drive for Fast Evaluation of Tire Wear by Clustering of Driving Data
L. Muth, C. Noll, W. Sextro, in: A. Orlova, D. Cole (Eds.), Advances in Dynamics of Vehicles on Roads and Tracks II - Proceedings of the 27th Symposium of the International Association of Vehicle System Dynamics, IAVSD 2021, Springer, Cham, 2022.

Development of a Hybrid Modeling Methodology for Oscillating Systems with Friction
M.C. Wohlleben, A. Bender, S. Peitz, W. Sextro, in: Machine Learning, Optimization, and Data Science, Springer International Publishing, Cham, 2022.

Experimental Investigation of the Influence of different Bond Tool Grooves on the Bond Quality for Ultrasonic Thick Wire Bonding
O.E.C. Hagedorn, M. Broll, O. Kirsch, T. Hemsel, W. Sextro, in: CIPS 2022 - 12th International Conference on Integrated Power Electronics Systems, VDE VERLAG GMBH, Berlin, 2022, pp. 138–143.

On the applicability of time series features as health indicators for technical systems operating under varying conditions
O.K. Aimiyekagbon, A. Bender, W. Sextro,  Condition Monitor (2022) 5–10.

Experimental Investigation of Multidimensional Ultrasonic Heavy Wire Bonding
C. Scheidemann, O. Kirsch, T. Hemsel, W. Sextro, in: 2022 IEEE 9th Electronics System-Integration Technology Conference (ESTC), IEEE, 2022.

Patent DE 10 2017 000 926 : Gerät mit wenigstens einem elastisch verformbaren Bauteil, insbesondere einem Gummi-Metall-Lager und mit einer Einrichtung zur Feststellung des Beginns einer verschleißbedingten Bauteil-Restnutzungsdauer, sowie Verfahren zur Bestimmung der Bauteil-Restnutzungsdauer.
K. Reinke, A. Bender, T. Meyer, W. Sextro, J.K. Kimotho, (2022).

Modellbasierte Ermittlung optimaler Prozessparameter für neuartige Ultraschallbondverbindungen
C. Scheidemann, T. Hemsel, W. Sextro, Modellbasierte Ermittlung optimaler Prozessparameter für neuartige Ultraschallbondverbindungen, LibreCat University, 2022.

Extraktion und Selektion geeigneter Merkmale für die Restlebensdauerprognose von technischen Systemen trotz aleatorischen Unsicherheiten 
O.K. Aimiyekagbon, A. Bender, W. Sextro, in: VDI-Berichte 2391, VDI Verlag GmbH, Düsseldorf, 2021, pp. 197–210.

Co-simulation of MATLAB and ANSYS for ultrasonic wire bonding process optimization
R. Schemmel, V. Krieger, T. Hemsel, W. Sextro, Microelectronics Reliability 119 (2021) 114077.

Hybrid Prediction Method for Remaining Useful Lifetime Estimation Considering Uncertainties
A. Bender, W. Sextro, in: P. Do, S. King,  Olga Fink (Eds.), Proceedings of the European Conference of the PHM Society 2021, 2021.

On the applicability of time series features as health indicators for technical systems operating under varying conditions
O.K. Aimiyekagbon, A. Bender, W. Sextro, in: Proceedings of the Seventeenth International Conference on Condition Monitoring and Asset Management (CM 2021), n.d.

Rule-based Diagnostics of a Production Line
O.K. Aimiyekagbon, L. Muth, M.C. Wohlleben, A. Bender, W. Sextro, in: P. Do, S. King, O. Fink (Eds.), Proceedings of the European Conference of the PHM Society 2021, 2021, pp. 527–536.

Tire Wear Reduction Based on an Extended Multibody Rear Axle Model
J. Schütte, W. Sextro, Vehicles (2021) 233–256.

Identification of joints for a load-adapted shape in a body in white using steady state vehicle simulations
S. Martin, J. Schütte, C. Bäumler, W. Sextro, T. Tröster, Forces in Mechanics 6 (2021).

Experimental analysis and modelling of bond formation in ultrasonic heavy wire bonding
R. Schemmel, C. Scheidemann, T. Hemsel, O. Kirsch, W. Sextro, in: CIPS 2020; 11th International Conference on Integrated Power Electronics Systems, 2020, pp. 1–6.

Schwingungen
K. Magnus, K. Popp, W. Sextro, Schwingungen, Springer Vieweg Wiesbaden, 2020.

Co-simulation of MATLAB and ANSYS for ultrasonic wire bonding process optimization
R. Schemmel, V. Krieger, T. Hemsel, W. Sextro, in: 2020 21st International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems (EuroSimE), 2020.

Evaluation of time series forecasting approaches for the reliable crack length prediction of riveted aluminium plates given insufficient data
O.K. Aimiyekagbon, A. Bender, W. Sextro, in: PHM Society European Conference, 2020.

Model-Based Investigation of the Influence of Wheel Suspension Characteristics on Tire Wear
J. Schütte, W. Sextro, in: Lecture Notes in Mechanical Engineering, Cham, 2020.

Patent EP 3 358 332 : Verfahren zur Bestimmung des Beginns einer verschleißbedingten Bauteil-Restnutzungsdauer eines elastisch verformbaren Bauteils, als Strukturteil und/oder Lagerteil eines Geräts.
K. Reinke, A. Bender, T. Meyer, W. Sextro, J.K. Kimotho, (2020).

Integration von Verlässlichkeitsmodellen der Entwicklung in einen Digitalen Zwilling zur Umsetzung einer vorausschauenden Instandhaltung
T. Kaul, J. Hentze, W. Sextro, I. Gräßler, in: T. Bertram, B. Corves, I. Gräßler, K. Janschek (Eds.), Fachtagung Mechatronik 2019 Paderborn, 2019, pp. 19–24.

Halbachsprüfstand zur kinematischen, elastokinematischen und dynamischen Charakterisierung von Radaufhängungen
J. Schütte, W. Sextro, S. Kohl, in: Fachtagung Mechatronik 2019, Universitätsbibliothek Paderborn, 2019, Paderborn, 2019.

Atomization of Fluids with Ultrasound
P. Dunst, P. Bornmann, T. Hemsel, W. Littmann, W. Sextro, in: J. Lötters, G. Urban (Eds.), Conference Proceedings - The 4th Conference on MicroFluidic Handling Systems (MF), Enschede, The Netherlands, 2019, pp. 140–143.

Messung hochfrequenter In-Plane-Schwingungen mittels Laservibrometrie in räumlich eingeschränkten Umgebungen
O.E.C. Hagedorn, D. Pielsticker, T. Hemsel, W. Sextro, in: 2. VDI-Fachtagung Schwingungen 2019, VDI Verlag GmbH · Düsseldorf 2019, 2019.

Intelligente Herstellung zuverlässiger Kupferbondverbindungen
W. Sextro, M. Brökelmann, Intelligente Herstellung Zuverlässiger Kupferbondverbindungen, Springer Verlag, 2019.

Konstruktion und Zustandsüberwachung eines Gummi-Metall-Teils mit integriertem Thermoelement
A. Bender, K. Reinke, W. Sextro, in: 10. VDI-Fachtagung Schwingungen von Windenergieanlagen 2019, Bremen 2019, 2019, pp. 241–248.

Integration von Verlässlichkeitsmodellen der Entwicklung in einen Digitalen Zwilling zur Umsetzung einer vorausschauenden Instandhaltung
T. Kaul, J. Hentze, W. Sextro, I. Gräßler, in: Fachtagung Mechatronik 2019 Paderborn, 2019.

Modellbasierte und experimentelle Charakterisierung von intensiven Ultraschall-Stehwellenfeldern für die Zerstäubung hochviskoser Flüssigkeiten
P. Dunst, T. Hemsel, P. Bornmann, W. Littmann, W. Sextro, in: DAGA 2019, 2019.

Using complex multi-dimensional vibration trajectories in ultrasonic bonding and welding
R. Schemmel, T. Hemsel, C. Dymel, M. Hunstig, M. Brökelmann, W. Sextro, Sensors and Actuators A: Physical 295 (2019) 653–662.

Remaining useful lifetime prediction based on adaptive failure thresholds
A. Bender, L. Schinke, W. Sextro, in: M. Beer, E. Zio (Eds.), Proceedings of the 29th European Safety and Reliability Conference (ESREL2019), 2019, pp. 1262–1269.

Digital Twin for Reliability Analysis During Design and Operation of Mechatronic Systems
T. Kaul, A. Bender, W. Sextro, in: M. Beer, E. Zio (Eds.), Proceedings of the 29th European Safety and Reliability Conference (ESREL2019), 2019, pp. 2340–2347.

A particle filtering approach for temperature based prognostics
A. Bender, W. Sextro, in: Safety and Reliability – Safe Societies in a Changing World, Trondheim, Norway, 2018, pp. 1025–1033.

Vibration Assisted Dosing, Mixing and Transport of Dry Fine Powders
P. Dunst, P. Bornmann, T. Hemsel, W. Littmann, W. Sextro, ACTUATOR 2018; 16th International Conference on New Actuators (2018) 142–145.

Vibration-Assisted Handling of Dry Fine Powders
P. Dunst, P. Bornmann, T. Hemsel, W. Sextro, Actuators 2018, 7(2). (2018) 1–11.

Numerical and statistical investigation of weld formation in a novel two-dimensional copper-copper bonding process
C. Dymel, P. Eichwald, R. Schemmel, T. Hemsel, M. Brökelmann, M. Hunstig, W. Sextro, in: (Proceedings of 7th Electronics System-Integration Technology Conference, Dresden, Germany), 2018, pp. 1–6.

Experimental investigations on the impact of bond process parameters in two-dimensional ultrasonic copper bonding
C. Dymel, R. Schemmel, T. Hemsel, W. Sextro, M. Brökelmann, M. Hunstig, in: (Proceedings of 8th Electronics IEEE CPMT Symposium Japan (ICSJ 2018), Kyoto, Japan), 2018, pp. 41–44.

Steigerung der Intelligenz mechatronischer Systeme
T. Meyer, T. Kaul, J.K. Kimotho, W. Sextro, Steigerung Der Intelligenz Mechatronischer Systeme, Springer Nature Switzerland AG. Part of Springer Nature., 2018.

Effects of different working frequencies on the joint formation in copper wire bonding
R. Schemmel, S. Althoff, W. Sextro, A. Unger, M. Brökelmann, M. Hunstig, in: CIPS 2018 - 10th International Conference on Integrated Power Electronics Systems (CIPS 2018), Stuttgart, Germany, 2018, pp. 230–235.

Numerical and experimental investigations in ultrasonic heavy wire bonding
R. Schemmel, T. Hemsel, W. Sextro, in: 6th European Conference on Computational Mechanics (ECCM 6), Glasgow, UK, 2018, pp. 1–12.

Intelligent Production of Wire Bonds using Multi-Objective Optimization – Insights, Opportunities and Challenges
A. Unger, M. Hunstig, T. Meyer, M. Brökelmann, W. Sextro, in: In Proceedings of IMAPS 2018 – 51st Symposium on Microelectronics, Pasadena, CA, 2018, 2018.

Integrated modeling of behavior and reliability in system development
J. Hentze, T. Kaul, I. Gräßler, W. Sextro, in: A. Maier, S. Skec, C. McKesson, M. Van der Loos (Eds.), ICE, 21ST INTERNATIONAL CONFERENCE ON ENGINEERING DESIGN, Nr. DS 87-USB, Design Society, 2017, pp. 385–394.

Entwicklung eines Condition Monitoring Systems für Gummi-Metall-Elemente
A. Bender, T. Kaul, W. Sextro, in: Verlagsschriftenreihe Des Heinz Nixdorf Instituts Band 369, Paderborn, 2017, Wissenschaftsforum Intelligente Technische Systeme (WInTeSys) 2017, 2017, pp. 347–358.

Modellbasierte Prognose der nutzbaren Restlebensdauer von Gummi-Metall-Elementen
A. Bender, J.K. Kimotho, S. Kohl, W. Sextro, K. Reinke, in: 15. Internationale Schienenfahrzeugtagung, 2017, pp. 123–125.

Neuartiges Konzept zur Lebensdauerprognose von Gummi-Metall-Elementen
A. Bender, W. Sextro, K. Reinke, in: VDI-Berichte 2301, 2017, pp. 49–60.

Analysis of pipe vibration in an ultrasonic powder transportationsystem
P. Dunst, T. Hemsel, W. Sextro, Elsevier Sensors and Actuators A 263 (2017) 733–736.

Multi-dimensional Ultrasonic Copper Bonding – New Challenges for Tool Design
P. Eichwald, S. Althoff, R. Schemmel, W. Sextro, A. Unger, M. Brökelmann, M. Hunstig, IMAPSource Vol. 2017, No. 1 (2017).

Integrated modeling og behavior and reliability in system development
J. Hentze, T. Kaul, I. Grässler, W. Sextro, in: ICE, 21st International Conference on Enginieering Design, 2017, pp. 385–394.

Formulation of reliability-related objective functions for design of intelligent mechatronic systems
T. Kaul, T. Meyer, W. Sextro, SAGE Journals Vol. 231(4) (2017) 390–399.

Estimation of Remaining Useful Lifetime of Piezoelectric Transducers Based on Self-Sensing
J.K. Kimotho, W. Sextro, T. Hemsel, in: IEEE Transactions on Reliability, 2017, pp. 1–10.

MoRFUS: Mobile Reinigungseinheit für Förderketten basierend auf Ultraschall
R. Schemmel, T. Hemsel, W. Sextro, in: 43. Deutsche Jahrestagung Für Akustik, Kiel 2017, 2017, pp. 611–614.

Model based optimization of dynamics in adaptive headlamps
S. Schulze, W. Sextro, K. Kister, in: Proceedings of the 12th International Symposium on Automotive Lighting 2017, 2017.

Entwicklung verlässlicher, intelligenter Systeme
W. Sextro, T. Meyer, T. Kaul, J.K. Kimotho, in: VDI-Berichte 2307–28. Tagung Technische Zuverlässigkeit (TTZ 2017) - Entwicklung Und Betrieb Zuverlässiger Produkte., Leonberg, 2017, pp. 17–30.

Shape-Dependent Transmittable Tangential Force of Wire Bond Tools
S. Althoff, T. Meyer, A. Unger, W. Sextro, F. Eacock, in: IEEE 66th Electronic Components and Technology Conference, 2016, pp. 2103–2110.

Kupferbondverbindungen intelligent herstellen
M. Brökelmann, A. Unger, T. Meyer, S. Althoff, W. Sextro, M. Hunstig, F. Biermann, K. Guth, Wt-Online 7/8 (2016) 512–519.

Transportation of dry fine powders by coordinated friction manipulation
P. Dunst, W. Sextro, P. Bornmann, T. Hemsel, W. Littmann, in: PAMM Proc. Appl. Math. Mech. 16, Braunschweig, 2016, pp. 635–636.

Micro Wear Modeling in Copper Wire Wedge Bonding
P. Eichwald, A. Unger, F. Eacock, S. Althoff, W. Sextro, K. Guth, M. Brökelmann, in: IEEE CPMT Symposium Japan, 2016, 2016.

Modeling of Complex Redundancy in Technical Systems with Bayesian Networks
T. Kaul, T. Meyer, W. Sextro, in: Proceedings of the Third European Conference of the Prognostics and Health Management Society 2016, 2016.

Aspects of Flexible Viscoelastic Suspension Modeling for Frictional Rolling Contact Analysis using ADAMS
S. Kohl, W. Sextro, S. Schulze, in: The 2nd International Conference on Automotive Innovation and Green Energy Vehicle (AiGEV 2016), Cyberjaya, Malaysia, 2016., Cyberjaya, Malaysia, 2016, 2016, pp. 1–12.

Condition Monitoring of Bearing Damage in Electromechanical Drive Systems by Using Motor Current Signals of Electric Motors: A Benchmark Data Set for Data-Driven Classification
C. Lessmeier, J.K. Kimotho, D. Zimmer, W. Sextro, in: European Conference of the Prognostics and Health Management Society, 2016.

Reliable Manufacturing of Heavy Copper Wire Bonds Using Online Parameter Adaptation
T. Meyer , A. Unger, S. Althoff, W. Sextro, M. Brökelmann, M. Hunstig, K. Guth, in: IEEE 66th Electronic Components and Technology Conference, 2016, pp. 622–628.

Using Adequate Reduced Models for Flexible Multibody Systems of Automotive Mechatronic Systems
S. Schulze, W. Sextro, S. Kohl, in: 2nd International Conference on Automotive Innovation and Green Energy Vehicle (AiGEV) Malaysia 2016, 2016, pp. 1–11.

Validated Simulation of the Ultrasonic Wire Bonding Process
A. Unger, R. Schemmel, T. Meyer, F. Eacock, P. Eichwald, S. Althoff, W. Sextro, M. Brökelmann, M. Hunstig, K. Guth, in: Wear Modeling in Copper Wire Wedge Bonding. IEEE CPMT Symposium Japan, 2016, IEEE CPMT Symposium Japan, 2016, pp. 251–254.

Improving the cleaning process in copper wire bonding by adapting bonding parameters
S. Althoff, A. Unger, W. Sextro, F. Eacock, in: 2015 17th Electronics Packaging Technology Conference, 2015, pp. 1–6.

Kavitationsdetektion mittels Self-Sensing-Ultraschallwandler
P. Bornmann, T. Hemsel, W. Sextro, G. Memoli, M. Hodnett, B. Zeqiri, Tm - Technisches Messen 82 (2015) 73–84.

Integrierte Modellierung der Dynamik und der Verlässlichkeit komplexer mechatronischer Systeme
T. Kaul, T. Meyer, W. Sextro, in: J. Gausemeier, R. Dumitrescu, F. Rammig, W. Schäfer, A. Trächtler (Eds.), 10. Paderborner Workshop Entwurf Mechatronischer Systeme, Heinz Nixdorf Institut, Universität Paderborn, Paderborn, 2015, pp. 101–112.

Integrated Model for Dynamics and Reliability of Intelligent Mechatronic Systems
T. Kaul, T. Meyer, W. Sextro, in: P. et al. (Ed.), European Safety and Reliability Conference (ESREL2015), Taylor and Francis, London, 2015.

Comparison and ensemble of temperature-based and vibration-based methods for machinery prognostics
J.K. Kimotho, W. Sextro, in: Annual Conference of the Prognostics and Health Management Society 2015, 2015.

Advantages of reliability-adaptive system operation for maintenance planning
T. Meyer, T. Kaul, W. Sextro, in: Proceedings of the 9th IFAC Symposium on Fault Detection, Supervision and Safety for Technical Processes, 2015, pp. 940–945.

Anforderungen an Condition-Monitoring-Verfahren zur Nutzung im zuverläsigkeitsgeregelten Betrieb adaptiver Systeme
T. Meyer, J.K. Kimotho, W. Sextro, in: 27. Tagung Technische Zuverlässigkeit (TTZ 2015) - Entwicklung Und Betrieb Zuverlässiger Produkte, Leonberg, 2015, pp. 111–122.

Modeling and simulation of the ultrasonic wire bonding process
T. Meyer, A. Unger, S. Althoff, W. Sextro, M. Brökelmann, M. Hunstig, K. Guth, in: 2015 17th Electronics Packaging Technology Conference, 2015.

A Mechanical Model for the Dynamical Contact of Elastic Rough Bodies with Viscoelastic Properties
F. Schulte, J. Neuhaus, W. Sextro, in: Proceedings of ICoEV 2015 International Conference on Engineering Vibration, 2015, pp. 1109–1117.

Modeling of the Stick-Slip Effect in Heavy Copper Wire Bonding to Determine and Reduce Tool Wear
A. Unger, W. Sextro, T. Meyer, P. Eichwald, S. Althoff, F. Eacock, M. Brökelmann, in: 2015 17th Electronics Packaging Technology Conference, 2015.

Dependability of Self-Optimizing Mechatronic Systems
J. Gausemeier, F.-J. Rammig, W. Schäfer, W. Sextro, Dependability of Self-Optimizing Mechatronic Systems, Springer-Verlag,  Heidelberg, Germany, 2014.

Self-optimizing Mechatronic Systems
M. Dellnitz, K. Flaßkamp, P. Hartmann, M. Krüger, T. Meyer, C. Priesterjahn, S. Ober-Blöbaum, C. Rasche, W. Sextro, K. Stahl, A. Trächtler, in: Dependability of Self-Optimizing Mechatronic Systems, Kapitel: 1.1, Springer-Verlag, Heidelberg, Germany, 2014, pp. 3–12.

Development of the Active Guidance Module
R. Dorociak, J. Gausemeier, P. Iwanek, T. Meyer, W. Sextro, C. Sondermann-W\'22olke, in: Dependability of Self-Optimizing Mechatronic Systems, AACE Press, 2014, pp. 178–182.

Dependability of Self-Optimizing Mechatronic Systems
J. Gausemeier, F.-J. Rammig,  Wilhelm Sch\'22afer, W. Sextro, Dependability of Self-Optimizing Mechatronic Systems, Springer-Verlag, Heidelberg, Germany, 2014.

Selecting Suitable Methods Using the Methodology
R. Dorociak,  J\'22urgen Gausemeier,  Peter Iwanek, T. Meyer, W. Sextro, in: Dependability of Self-Optimizing Mechatronic Systems, Springer-Verlag Berlin Heidelberg, 2014, pp. 174–178.

Selecting Suitable Methods Using the Methodology
R. Dorociak, J. Gausemeier, P. Iwanek, T. Meyer, W. Sextro, in: Dependability of Self-Optimizing Mechatronic Systems, Springer-Verlag Berlin Heidelberg, 2014, pp. 174–178.

Challenges
P. Iwanek, T.  Meyer, C. Priesterjahn, W. Sextro, M. Va\'73sholz, in: Dependability of Self-Optimizing Mechatronic Systems, Springer-Verlag, Heidelberg, Germany, 2014, pp. 12–15.

Improving the bond quality of copper wire bonds using a friction model approach
S. Althoff, J. Neuhaus, T. Hemsel, W. Sextro, in: Electronic Components and Technology Conference (ECTC), 2014 IEEE 64th, 2014, pp. 1549–1555.

Self-Sensing Ultrasound Transducer for Cavitation Detection
P. Bornmann, T. Hemsel, W. Sextro, G. Memoli, M. Hodnett, B. Zeqiri, in: 2014 IEEE International Ultrasonics Symposium Proceedings, 2014, pp. 663–666.

Analysis Method of Tool Topography Change and Identification of Wear Indicators for Heavy Copper Wire Wedge Bonding
P. Eichwald, W. Sextro, S. Althof, F. Eacock, A. Unger, T. Meyer, K. Guth, in: Proceedings of the 47th International Symposium on Microelectronics, 2014, pp. 856–861.

Dependability of Self-Optimizing Mechatronic Systems
J. Gausemeier, F. Josef Rammig, W. Schäfer, W. Sextro, Dependability of Self-Optimizing Mechatronic Systems, Springer Berlin Heidelberg, 2014.

Reliability analysis of ultrasonic power transducers
T. Hemsel, P. Bornmann, T. Morita, C. Sondermann-Wölke, W. Sextro, Archive of Applied Mechanics (2014) 1–7.

High-velocity operation of piezoelectric inertia motors: experimental validation
M. Hunstig, T. Hemsel, W. Sextro, Archive of Applied Mechanics (2014) 1–9.

PEM fuel cell prognostics using particle filter with model parameter adaptation
J.K. Kimotho, T. Meyer, W. Sextro, in: Prognostics and Health Management (PHM), 2014 IEEE Conference On, 2014, pp. 1–6.

An approach for feature extraction and selection from non-trending data for machinery prognosis
J.K. Kimotho, W. Sextro, in: Proceedings of the Second European Conference of the Prognostics and Health Management Society 2014, 2014.

Optimal Parameter Tuning for Multiclass Support Vector Machines in Machinery Health State Estimation
J.K. Kimotho, W. Sextro, PAMM 14 (2014) 815–816.

Tire footprint analysis depending on the elastokinematics of a multi-link suspension system using multi-body dynamics simulation
S. Kohl, W. Sextro, A. Zuber, PAMM 14 (2014) 65–66.

Conclusion and Outlook
T. Meyer, C. Priesterjahn, W. Sextro, in: J. Gausemeier, F. Josef Rammig, W. Schäfer, W. Sextro (Eds.), Dependability of Self-Optimizing Mechatronic Systems, Springer Berlin Heidelberg, 2014, pp. 189–190.

Method to Identify Dependability Objectives in Multiobjective Optimization Problem
T. Meyer , C. Sondermann-Wölke, W. Sextro, Conference Proceedings of the 2nd International Conference on System-Integrated Intelligence 15 (2014) 46–53.

Thermo-Mechanical Model for Wheel Rail Contact using Coupled Point Contact Elements
J. Neuhaus, W. Sextro, in: G.R. Liu, Z.W. Guan (Eds.), Proceedings of the 5th International Conference on Computational Methods, ScienTech Publisher, 2014.

Contact Modeling in Multibody Systems with Elastic Bodies in High-Frequency Applications
S. Schulze, W. Sextro, F. Grüter, PAMM 14 (2014) 39–40.