Maghemite nanoparticles synthesis via spray flame synthesis and particle characterization by hole in a tube sampling and scanning mobility particle sizing (HIAT-SMPS)
R. Tischendorf, O. Massopo, H.-J. Schmid, O. Pyrmak, S. Dupont, F. Fröde, H. Pitsch, R. Kneer, eds., Maghemite Nanoparticles Synthesis via Spray Flame Synthesis and Particle Characterization by Hole in a Tube Sampling and Scanning Mobility Particle Sizing (HIAT-SMPS), Elsevier, 2024.
LibreCat: /record/51133
DOI: https://doi.org/10.1016/j.jaecs.2023.100235

Evaluation of Surrogate Aerosol Experiments to Predict Spreading and Removal of Virus-Laden Aerosols
J. Beimdiek, H.-J. Schmid, Atmosphere (2024).
LibreCat: /record/51731

Evaluation of Surrogate Aerosol Experiments to Predict Spreading and Removal of Virus-Laden Aerosols
J. Beimdiek, H.-J. Schmid, Atmosphere 15 (2024).
LibreCat: /record/52357
DOI:  10.3390/atmos15030305

Instabilities of Polymer Melt Suspensions under Uniaxial Extension (Poster)
M. Neukötter, S. Jesinghausen, H.-J. Schmid, in: 2023.
LibreCat: /record/44102

Experimental and simulative determination and correction of the effective gap extension in structured coaxial measuring systems
S. Josch, S. Jesinghausen, C. Dechert, H.-J. Schmid, Rheologica Acta (2023).
LibreCat: /record/36983
DOI: 10.1007/s00397-023-01383-2

CDMA: Centrifugal Differential Mobility Analyzer - Ein Messprinzip zur Bestimmung von Multidimensionalen Partikeleigenschaften (Vortrag)
T. Rüther, H.-J. Schmid, in: 2023.
LibreCat: /record/43236

Development of an adaptive coaxial concrete rheometer and rheological characterisation of fresh concrete
S. Josch, S. Jesinghausen, H.-J. Schmid, Applied Rheology 33 (2023).
LibreCat: /record/43034
DOI: 10.1515/arh-2022-0140

Flowability of polymer powders at elevated temperatures for additive manufacturing
M.J. Rüther, S.H. Klippstein, S. Ponusamy, T. Rüther, H.-J. Schmid, Powder Technology 422 (2023).
LibreCat: /record/43128
DOI: 10.1016/j.powtec.2023.118460

Dynamisch-mechanische Polymerpartikelverrundung zur Verbesserung der Fließfähigkeit für das selektive Lasersintern
S. Ponusamy, H.-J. Schmid, in: 2023.
LibreCat: /record/44244

Particles as Seeds for Instabilities in Uniaxially Elongated Polymer Suspension Filaments (Presentation)
M. Neukötter, S. Jesinghausen, H.-J. Schmid, in: 2023.
LibreCat: /record/44103

Influence of the filler–matrix adhesion and the effects of conditioning on tensile properties of laser-sintered parts built with polyamide–glass bead dry blends
I. Kletetzka, M. Kosanke, D. Meinderink, V. Neßlinger, G. Grundmeier, H.-J. Schmid, Progress in Additive Manufacturing (2023).
LibreCat: /record/46815
DOI: 10.1007/s40964-023-00501-z

Influence of a prolonged shelf time on P laser sintering powder and resulting part properties
S.H. Klippstein, I. Kletetzka, I. Sural, H.-J. Schmid, The International Journal of Advanced Manufacturing Technology  (2023).
LibreCat: /record/43046
DOI: https://doi.org/10.1007/s00170-023-11243-1

Case Study IV: Individualized Medical Technology using Additive Manufacturing
D. Menge, D. Milaege, K.-P. Hoyer, H.-J. Schmid, M. Schaper, in: I. Horwath, S. Schweizer (Eds.), Climate Protection, Resource Efficiency, and Sustainable Engineering, transcript Verlag, Bielefeld, Germany, 2023.
LibreCat: /record/46870
DOI: 10.14361/9783839463772-007

Correlation between SLS-Powder processability and particle properties 
M.J. Rüther, S.H. Klippstein, H.-J. Schmid, in: PARTEC International Congress on Particle Technology - Book of Abstracts, VDI Verlag GmbH, Düsseldorf, 2023, pp. 172–176.
LibreCat: /record/47626

Assessing the Impact of the Powder Production Method on Ceramic-filled Polyamide Composites made by Laser Sintering
I. Kletetzka, F. Neitzel, H.-J. Schmid, in: J. Beaman (Ed.), Proceedings of the 34th Annual International Solid Freeform Fabrication Symposium, Laboratory for Freeform Fabrication and University of Texas, Austin, 2023.
LibreCat: /record/46764

Large eddy simulation of iron oxide formation in a laboratory spray flame
F. Fröde, T. Grenga, H. Pitsch, S. Dupont, R. Kneer, R. Tischendorf, O. Massopo, H.-J. Schmid, eds., Large Eddy Simulation of Iron Oxide Formation in a Laboratory Spray Flame, Elsevier, 2023.
LibreCat: /record/51136
DOI: https://doi.org/10.1016/j.jaecs.2023.100191

Influence of atomization on the particle formation in spray flame pyrolysis (Presentation)
O. Massopo, R. Tischendorf, H.-J. Schmid, F. Fröde, T. Grenga, H. Pitsch, M. Bieber, M. Reddemann, R. Kneer, in: 2023.
LibreCat: /record/51147

Nanoparticle Concentration Measurement in Flame Spray Pyrolysis (Poster)
O. Massopo, H.-J. Schmid, M. Gonchikzhapov, T. Kasper, in: 2023.
LibreCat: /record/51145

Einfluss der Zerstäubung auf diePartikelbildung bei der Sprayflammenpyrolyse (Vortrag)
O. Massopo, R. Tischendorf, H.-J. Schmid, F. Fröde, H. Pitsch, M. Reddemann, T. Grenga, R. Kneer, in: 2023.
LibreCat: /record/51142

Neuartige Flugstrom SCR an online synthetisierten, nanoskaligen Katalysatorpartikeln in einem kombinierten Gasreinigungsprozess (Poster)
J. Beimdiek, S. Schiller, H.-J. Schmid, in: Paderborn, 2023.
LibreCat: /record/51726

Entrained flow SCR using an in-situ synthesis of catalyst particles for a combined flue gas cleaning system
J. Beimdiek, S. Schiller, H.-J. Schmid, in: VDI Verlag, Düsseldorf, 2023.
LibreCat: /record/51727

Assessing the Impact of the Powder Production Method on Ceramic-filled Polyamide Composites made by Laser Sintering
I. Kletetzka, F. Neitzel, H.-J. Schmid, in: J. Beaman (Ed.), Proceedings of the 34th Annual International Solid Freeform Fabrication Symposium, Laboratory for Freeform Fabrication and University of Texas, Austin, 2023.
LibreCat: /record/51218
DOI: https://doi.org/10.26153/tsw/50931

Halogen-Free Flame Retardant Powder Materials for Laser Sintering: Evaluation and Process Stability Analysis
F. Neitzel, I. Kletetzka, H.-J. Schmid, in: J. Beaman (Ed.), Proceedings of the 34th Annual International Solid Freeform Fabrication Symposium, Laboratory for Freeform Fabrication and University of Texas, Austin, 2023.
LibreCat: /record/46862
DOI: https://doi.org/10.26153/tsw/50926

Model droplet formation in extensional filament stretching within a Filament Extension Atomizer
M. Neukötter, S. Jesinghausen, H.-J. Schmid, Rheologica Acta (2022).
LibreCat: /record/31035
DOI: 10.1007/s00397-022-01339-y

A combined flue gas cleaning system with a novel entrained flow SCR using an online synthesized catalyst (Poster)
J. Beimdiek, H.-J. Schmid, in: 2022.
LibreCat: /record/37424

Innovative Werkstoffherstellung für das Polymer Laser Sintern – Teil 2
M.J. Rüther, S.H. Klippstein, S. Ponusamy, S. Jesinghausen, H.-J. Schmid, Werkstoffe 6 (2022) 18–19.
LibreCat: /record/35729

Innovative Werkstoffherstellung für das Polymer Laser Sintern – Teil 1
M.J. Rüther, S.H. Klippstein, S. Ponusamy, S. Jesinghausen, H.-J. Schmid, Werkstoffe 5 (2022) 28–29.
LibreCat: /record/35724

Combined filtration process for biomass combustion plants to comply with legal requirements (Presentation)
J. Beimdiek, F. Prill, M. König, M. Müller, I. Hartmann, H.-J. Schmid, in: 13th World Filtration Congress Proceedings, 2022.
LibreCat: /record/37436

A combined flue gas cleaning system with a novel entrained flow SCR using online synthesized catalyst particles (Poster)
J. Beimdiek, H.-J. Schmid, in: IAC 2022 Book of Abstacts, 2022.
LibreCat: /record/37426

Novel entrained flow SCR using online synthesized catalyst particles (Poster)
J. Beimdiek, H.-J. Schmid, in: 2022.
LibreCat: /record/37432

Novel entrained flow SCR using online synthesized catalyst particles in flue gas cleaning systems (Presentation)
J. Beimdiek, H.-J. Schmid, in: 2022.
LibreCat: /record/37430

Triggering instabilities of polymer solution suspensions under uniaxial extension  (Presentation)
M. Neukötter, S. Jesinghausen, H.-J. Schmid, in: 2022.
LibreCat: /record/41160

Instability analysis of suspensions with a polymer solution matrix (Presentation)
M. Neukötter, S. Jesinghausen, H.-J. Schmid, in: 2022.
LibreCat: /record/41158

Flowability of polymer powders at elevated temperatures for additive manufacturing
M.J. Rüther, S.H. Klippstein, H.-J. Schmid, in: M.J. Rüther, S.H. Klippstein, H.-J. Schmid (Eds.), 2022.
LibreCat: /record/33695

A novel correction method for the shear rate in a couette rheometer (Vortrag)
T. Rüther, S. Jesinghausen, H.-J. Schmid, in: 2022.
LibreCat: /record/43238

Multidimensional particle characterization: Centrifugal Differential Mobility Analyzer (Poster)
T. Rüther, H.-J. Schmid, in: 2022.
LibreCat: /record/43243

NEW CORRECTION APPROACHES FOR DETERMINING THE TRUE SHEAR RATE IN A COAXIAL-RHEOMETER (Vortrag)
T. Rüther, S. Jesinghausen, H.-J. Schmid, in: 2022.
LibreCat: /record/43240

Powder Spread Process Monitoring in Polymer Laser Sintering and its Influences on Part Properties
S.H. Klippstein, F. Heiny, N. Pashikanti, M. Gessler, H.-J. Schmid, JOM - The Journal of The Minerals, Metals &; Materials Society (TMS) 74 (2022) 1149–1157.
LibreCat: /record/30228
DOI: https://doi.org/10.1007/s11837-021-05042-w 

Powder Spread Flaws in Polymer Laser Sintering and its Influences on Mechanical Performance
S.H. Klippstein, H.-J. Schmid, in: Proceedings of the 33nd Annual International Solid Freeform Fabrication Symposium, Austin, TX, USA, 2022.
LibreCat: /record/33356

A Shape Newton Scheme for Deforming Shells with Application to Capillary Bridges
S. Schmidt, M. Gräßer, H.-J. Schmid, SIAM Journal on Scientific Computing 44 (2022) 75–94.
LibreCat: /record/44468
DOI: 10.1137/20m1389054

Low Temperature Laser Sintering with P and P on a Standard System
D. Menge, H.-J. Schmid, Macromolecular Symposia 404 (2022).
LibreCat: /record/44469
DOI: 10.1002/masy.202100397

Effects of spherical fillers on the processability and mechanical properties of  and PP-based LS dry blends
I. Kletetzka, R. Gawlikowicz, H.-J. Schmid, in: Proceedings of the 33th Annual International Solid Freeform Fabrication Symposium, Laboratory for Freeform Fabrication and University of Texas, Austin, 2022.
LibreCat: /record/30220
DOI: http://dx.doi.org/10.26153/tsw/44558

Shelf Life of Polyamide 12 () Laser Sintering Powder
I. Kletetzka, S.H. Klippstein, H.-J. Schmid, in: Proceedings of the 33th Annual International Solid Freeform Fabrication Symposium, Laboratory for Freeform Fabrication and University of Texas, Austin, 2022.
LibreCat: /record/32874
DOI: http://dx.doi.org/10.26153/tsw/44555

Mechanical characterization and numerical modeling of laser-sintered TPE lattice structures
C. Kummert, H.-J. Schmid, L. Risse, G. Kullmer, Journal of Materials Research (2021).
LibreCat: /record/25142
DOI: 10.1557/s43578-021-00321-3

Low Temperature Laser Sintering on a Standard System: First Attempts and Results with P
D. Menge, H.-J. Schmid, in: 2021.
LibreCat: /record/23760

Einfluss der Zerstäubung auf die Partikelsynthese in Sprayflammen
R. Tischendorf, H.-J. Schmid, M. Bieber, M. Reddemann, R. Kneer, F. Fröde, T. Grenga, H. Pitsch, in: Paderborn, 2021.
LibreCat: /record/30364

Charakterisierung des Fließverhaltens von Frischbeton – Entwicklung eines adaptiven Rheometers (ACCR) und Einfluss von Maßnahmen zur Sedimentationsprävention
S. Pawelczyk, S. Jesinghausen, H.-J. Schmid, Charakterisierung des Fließverhaltens von Frischbeton – Entwicklung eines adaptiven Rheometers (ACCR) und Einfluss von Maßnahmen zur Sedimentationsprävention, Digitales Jahrestreffen der ProcessNet Fachgruppen MPH und CFD, 2021.
LibreCat: /record/24202

Flowability Measurements of Different SLS Materials at Elevated Temperatures with a Modified Schulze Ring Shear Tester
M.J. Rüther, D. Schulze, H.-J. Schmid, in: digital, 2021.
LibreCat: /record/30225

Effektivität von Luftreinigern zur Reduzierung des COVID-19-Infektionsrisikos/ Efficacy of air purifiers in reducing the risk of COVID-19 infections
S. Schumacher, C. Asbach, H.-J. Schmid, Gefahrstoffe (2021) 16–28.
LibreCat: /record/26095
DOI: 10.37544/0949-8036-2021-01-02-18

Assessing spreading and removal of virus laden aerosols in different settings using an aerosol method (Presentation)
J. Ludwig, C. Kykal, H.-J. Schmid, in: The Aerosol Society (Ed.), Book of Abstracts for the 2021 European Aerosol Conference, 2021.
LibreCat: /record/27551

Synthese und asymmetrische Funktionalisierung von submikronen Janus-Polymer-Partikeln in der Gasphase (Poster)
J. Ludwig, H.-J. Schmid, in: 2021.
LibreCat: /record/27553

Theoretische Beschreibung des Tropfenbildungsprozesses bei der Filament Extension Atomization: Entwicklung eines Vorhersagemodells für die Tropfengröße (Poster)
M. Neukötter, S. Jesinghausen, H.-J. Schmid, in: 2021.
LibreCat: /record/24475

Filament Extension Atomization – A novel Process for Powder Production? (Presentation)
M. Neukötter, S. Jesinghausen, H.-J. Schmid, in: 2021.
LibreCat: /record/30221

Laser Sintering Design Guidelines for media transmitting Components
I. Kletetzka, C. Kummert, H.-J. Schmid, in: Proceedings of the 32nd Annual International Solid Freeform Fabrication Symposium, Laboratory for Freeform Fabrication and University of Texas, Austin, 2021.
LibreCat: /record/24160
DOI: http://dx.doi.org/10.26153/tsw/17548

Additive Leichtbaustrukturen für die Flugzeugkabine
D. Menge, S.H. Klippstein, H.-J. Schmid, Additive Leichtbaustrukturen für die Flugzeugkabine, 2020.
LibreCat: /record/24943

An Apparatus to Synthesize Ceramic Nanoparticles with a Precisely Adjusted Temperature History and a Significant Mass Output
D.B. Rasche, L. Tigges, H.-J. Schmid, Review of Scientific Instruments 91 (2020) 055104.
LibreCat: /record/24241
DOI: 10.1063/1.5133438

Influence of Part Microstructure on Mechanicl Properties of PX Laser Sintered Specimens
C. Kummert, W. Diekmann, K. Tews, H.-J. Schmid, in: 29th Annual International Solid Freeform Fabrication Symposium, 2020, pp. 735–744.
LibreCat: /record/22182
DOI: http://utw10945.utweb.utexas.edu/sites/default/files/2019/063%20Influence%20of%20Part%20Microstructure%20on%20Mechanical%20Pro.pdf

Influence of differing nozzle configurations on the final particle characteristics and particle structure evolution in spray flames
R. Tischendorf, H.-J. Schmid, M. Bieber, M. Reddemann , R. Kneer, F. Fröde, T. Grenga, H. Pitsch, in: 4th International Symposium GasPhase Synthesis of Functional Nanomaterials, 2020.
LibreCat: /record/25062

Interlaboratory study on rheological properties of cement pastes and reference substances: comparability of measurements performed with different rheometers and measurement geometries
M. Haist, J. Link, D. Nicia, S. Leinitz, C. Baumert, T. von Bronk, D. Cotardo, M. Eslami Pirharati, S. Fataei, H. Garrecht, C. Gehlen, I. Hauschildt, I. Ivanova, S. Jesinghausen, C. Klein, H.-W. Krauss, L. Lohaus, D. Lowke, O. Mazanec, S. Pawelczyk, U. Pott, N.W. Radebe, J.J. Riedmiller, H.-J. Schmid, W. Schmidt, E. Secrieru, D. Stephan, M. Thiedeitz, M. Wilhelm, V. Mechtcherine, Materials and Structures (2020).
LibreCat: /record/21949
DOI: 10.1617/s11527-020-01477-w

Absolute Rheological Measurements of Model Suspensions: Influence and Correction of Wall Slip Prevention Measures
S. Pawelczyk, M. Kniepkamp, S. Jesinghausen, H.-J. Schmid, Materials (2020).
LibreCat: /record/21948
DOI: 10.3390/ma13020467

FVA-Nr. 813 I - Generative Verfahren zur Herstellung von Polymerbauteilen
D. Menge, R. Walter, H.-J. Schmid, U.P. Breuer, FVA-Nr. 813 I - Generative Verfahren zur Herstellung von Polymerbauteilen, Frankfurt, 2019.
LibreCat: /record/24628

Understanding and Manipulation of Nanoparticle Contact Forces by Capillary Bridges
H.-J. Schmid, G. Grundmeier, M. Dörmann, A.G. Orive, T. de los Arcos, B. Torun, in: Particles in Contact, Cham, 2019.
LibreCat: /record/26098
DOI: 10.1007/978-3-030-15899-6_2

Methodik zur Qualifizierung des Lasersinter Prozesses für die Serienfertigung
S.H. Klippstein, H.-J. Schmid, in: Proceedings of the 16th Rapid.Tech Conference, 2019.
LibreCat: /record/22198
DOI: 10.3139/9783446462441.025

Representative Sample Extraction from Spray Flames for SMPS and HR-TEM Measurements
R. Tischendorf, M. Bieber, R. Kneer, H.-J. Schmid, in: PARTEC 2019 International Congress on Particle Technology, 2019.
LibreCat: /record/24515

Devolopment, Production and post-processing of a topology optimized aircraft bracket 
S.H. Klippstein, A. Duchting, T. Reiher, F. Hengsbach, D. Menge, H.-J. Schmid, in: 30th Annual International Solid Freeform Fabrication Symposium, 2019, pp. 1932–1945.
LibreCat: /record/22202

Water adsorption and capillary bridge formation on silica micro-particle layers modified with perfluorinated organosilane monolayers
I. Giner, B. Torun, Y. Han, B. Duderija, D. Meinderink, A.G. Orive, M.T. de los Arcos de Pedro, C. Weinberger, M. Tiemann, H.-J. Schmid, G. Grundmeier, Applied Surface Science (2019) 873–879.
LibreCat: /record/22541
DOI: 10.1016/j.apsusc.2018.12.221

Representative domain size for the simulation of coalescence filtration in nonwoven and foam media
S. Abishek, A.J.C. King, J. Schuler, G. Kasper, H.-J. Schmid, B.J. Mullins, Separation and Purification Technology (2018) 344–352.
LibreCat: /record/26103
DOI: 10.1016/j.seppur.2018.06.051

Topology Optimized Heat Transfer Using the Example of an Electronic Housing
D. Menge, P. Delfs, M. Töws, H.-J. Schmid, in: 29th Annual International Solid Freeform Fabrication Symposium, 2018, pp. 687–697.
LibreCat: /record/22183

Thermoplastic Elastomer Part Color as Function of Temperature Histories and Oxygen Atmosphere During Selective Laser Sinterung
C. Kummert, S. Josupeit, H.-J. Schmid, Journal of Minerals, Metals and Materials Society 70 (2018) 425–430.
LibreCat: /record/22196
DOI: 10.1007/s11837-017-2658-2

Bestimmung von Nanopartikeleigenschaften eines Aerosols
H.-J. Schmid, D. Rasche, (2018).
LibreCat: /record/29824

Aufbau einer Lasersinter-Versuchsanlage und Verarbeitung neuer Materialien am Beispiel von Polyamid 6 und Polyamid 613
J. Lohn, H.-J. Schmid, in: Rapid.Tech – International Trade Show &; Conference for Additive Manufacturing, München, 2017.
LibreCat: /record/26104
DOI: 10.3139/9783446454606.023

Dependencies of the Adhesion Forces between TiO2 Nanoparticles on Size and Ambient Humidity
J. Laube, M. Dörmann, H.-J. Schmid, L. Mädler, L. Colombi Ciacchi, The Journal of Physical Chemistry C (2017) 15294–15303.
LibreCat: /record/26106
DOI: 10.1021/acs.jpcc.7b05655

Distance-dependency of capillary bridges in thermodynamic equilibrium
M. Dörmann, H.-J. Schmid, Powder Technology (2017) 175–183.
LibreCat: /record/26107
DOI: 10.1016/j.powtec.2017.01.012

Herstellbarkeit und mechanische Charakterisierung von lasergesinterten Gitterstrukturen
D. Menge, S. Josupeit, P. Delfs, H.-J. Schmid, in: H.A. Richard, B. Schramm, T. Zipsner (Eds.), Additive Fertigung von Bauteilen und Strukturen, Springer Vieweg, Wiesbaden, 2017, pp. 105–120.
LibreCat: /record/23759
DOI: 10.1007/978-3-658-17780-5

Experimental analysis and modeling of local ageing effects during laser sintering of polyamide 12 in regard to individual thermal histories
S. Josupeit, H.-J. Schmid, Journal of Applied Polymer Science 134 (2017).
LibreCat: /record/22195
DOI: 10.1002/app.45435

Modelling of temperatures and heat flow within laser sintered part cakes
S. Josupeit, L. Ordia, H.-J. Schmid, Additive Manufacturing (2016) 189–196.
LibreCat: /record/26109
DOI: 10.1016/j.addma.2016.06.002

Guard ring induced distortion of the steady velocity profile in a parallel plate rheometer
H.-J. Schmid, S. Pieper, Applied Rheology (2016).
LibreCat: /record/26111
DOI: 10.3933/APPLRHEOL-26-64533

Layer-formation of non-colloidal suspensions in a parallel plate rheometer under steady shear
S. Pieper, H.-J. Schmid, Journal of Non-Newtonian Fluid Mechanics (2016) 1–7.
LibreCat: /record/26118
DOI: 10.1016/j.jnnfm.2016.04.004

Additive Fertigung
J. Gausemeier, M. Schmidt, R. Anderl, H.-J. Schmid, C. Leyens, G. Seliger, M. Karg, M. Kage, Additive Fertigung, acatech - Deutsche Akademie der Technikwissenschaften, München, 2016.
LibreCat: /record/27443

Manufacturability and Mechanical Characterization of Laser Sintered Lattice Structures
S. Josupeit, P. Delfs, D. Menge, H.-J. Schmid, in: 27th Annual International Solid Freeform Fabrication Symposium , 2016, pp. 2077–2086.
LibreCat: /record/22180
DOI: http://utw10945.utweb.utexas.edu/sites/default/files/2016/166-Josupeit.pdf

Optimized build orientation of additive manufactured parts for improved surface quality and build time
P. Delfs, M. Tows, H.-J. Schmid, Additive Manufacturing 2 (2016) 214–320.
LibreCat: /record/22185
DOI: 10.1016/j.addma.2016.06.003

Extended Analysis of the Surface Topography of Laser Sintered Polymer Parts 
P. Delfs, H.-J. Schmid, in: Fraunhofer Direct Digital Manufacturing Conference, 2016, pp. 411–414.
LibreCat: /record/22190
DOI: https://www.bookshop.fraunhofer.de/buch/fraunhofer-direct-digital-manufacturing-conference-ddmc-2016/245111#

Thermal properties of polyamide 12 powder for application in laser sintering
S. Josupeit, H.-J. Schmid, in: International Congress on Particle Technology (PARTEC) , 2016.
LibreCat: /record/22194

Dimensional accuracy of polymer laser sintered parts: Influences and measures
S. Josupeit, P. Delfs, T. Lieneke, G. Adam, M. Gessler, H. Pfisterer, H.-J. Schmid, in: Rapid Tech - International Trade Show &; Conference for Additive Manufacturing , 2016, pp. 107–120.
LibreCat: /record/22200
DOI: 10.3139/9783446450608.009

Additive Manufacturing of a Lightweight Rotor for a Permanent Magnet Synchronous Machine
S. Lammers, G. Adam, H.-J. Schmid, R. Mrozek, R. Oberacker, M. Hoffmann, F. Quattrone, B. Ponick, in: EDPC 2016, 2016.
LibreCat: /record/22404
DOI: 10.1109/EDPC.2016.7851312

Influences on the dimensional Accuracy of Laser Sintered Parts along the Process Chain
S. Josupeit, P. Delfs, T. Lieneke, H.-J. Schmid, in: 27th Annual International Solid Freeform Fabrication Symposium , 2016.
LibreCat: /record/22408

Direct measurement of wall slip and slip layer thickness of non-Brownian hard-sphere suspensions in rectangular channel flows
S. Jesinghausen, R. Weiffen, H.-J. Schmid, Experiments in Fluids (2016).
LibreCat: /record/21947
DOI: 10.1007/s00348-016-2241-6

Layer-formation of non-colloidal suspensions in a parallel plate rheometer under steady shear
S. Pieper, H.-J. Schmid, Journal of Non-Newtonian Fluid Mechanics (2016) 1–7.
LibreCat: /record/25140
DOI: 10.1016/j.jnnfm.2016.04.004

Geometrische Genauigkeit von Lasersinter-Bauteilen: Einflüsse und Maßnahmen / Dimensional accuracy of polymer laser sintered parts: Influences and measures
W. Kniffka, M. Eichmann, G. Witt, S. Josupeit, P. Delfs, T. Lieneke, G. Adam, H.-J. Schmid, eds., Geometrische Genauigkeit von Lasersinter-Bauteilen: Einflüsse Und Maßnahmen / Dimensional Accuracy of Polymer Laser Sintered Parts: Influences and Measures, München, 2016.
LibreCat: /record/26113
DOI: 10.3139/9783446450608.009

Evaluation of the Efficiency of Filtration Processes Using Precoat Materials
S. Schiller, C. Hellmich, H.-J. Schmid, Chemical Engineering &; Technology (2015) 491–498.
LibreCat: /record/26108
DOI: 10.1002/ceat.201500385

Process Development of a Liquid-Liquid Phase Transfer of Colloidal Particles for Production of High-Quality Organosols
J.V. Erler, S. Machunsky, S. Franke, P. Grimm, H.-J. Schmid, U.A. Peuker, in: Colloid Process Engineering, Cham, 2015.
LibreCat: /record/26119
DOI: 10.1007/978-3-319-15129-8_16

Bipolar charge distribution of a soft X-ray diffusion charger
L. Tigges, A. Wiedensohler, K. Weinhold, J. Gandhi, H.-J. Schmid, Journal of Aerosol Science (2015) 77–86.
LibreCat: /record/26121
DOI: 10.1016/j.jaerosci.2015.07.002

On the bipolar charge distribution used for mobility particle sizing: Theoretical considerations
L. Tigges, A. Jain, H.-J. Schmid, Journal of Aerosol Science (2015) 119–134.
LibreCat: /record/26122
DOI: 10.1016/j.jaerosci.2015.05.010

Highly efficient filtration of ultrafine dust in baghouse filters using precoat materials
S. Schiller, H.-J. Schmid, Powder Technology (2015) 96–105.
LibreCat: /record/26123
DOI: 10.1016/j.powtec.2015.03.048

Simulation of Capillary Bridges between Particles
M. Dörmann, H.-J. Schmid, Procedia Engineering (2015) 14–23.
LibreCat: /record/26124
DOI: 10.1016/j.proeng.2015.01.102

Mass finishing of laser sintered parts
P. Delfs, Z. Li, H.-J. Schmid, in: 26th Annual International Solid Freeform Fabrication Symposium, 2015, pp. 514–526.
LibreCat: /record/22178
DOI: http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-41-Delfs.pdf

Temperature History within Laser Sintered Part Cakes and its Influence on Process Quality
S. Josupeit, H.-J. Schmid, in: 26th Annual International Solid Freeform Fabrication Symposium, 2015, pp. 190–199.
LibreCat: /record/22179
DOI: http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-15-Josupeit.pdf

Material Properties of Laser Sintered Polyamide 12 as Function of Build Cycles Using Low Refresh Rates
S. Josupeit, J. Lohn, E. Hermann, M. Gessler, S. Tenbrink, H.-J. Schmid, in: 26th Annual International Solid Freeform Fabrication Symposium, 2015, pp. 540–549.
LibreCat: /record/22187
DOI: http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-43-Josupeit.pdf

Surface roughness optimized alignment of parts for additive manufacturing processes
P. Delfs, M. Toews, H.-J. Schmid, in: 26th Annual International Solid Freeform Fabrication Symposium, 2015, pp. 1334–1344.
LibreCat: /record/22189
DOI: http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-107-Delfs.pdf

Powder ageing and material properties of laser sintered polyamide 12 using low refresh rates
S. Josupeit, S. Tutzschky, M. Gessler, H.-J. Schmid, in: Proceedings of the Rapid Tech 2015, Springer Vieweg, 2015, pp. 63–78.
LibreCat: /record/22199
DOI: 10.1007/978-3-662-48473-9_5