Maghemite nanoparticles synthesis via spray flame synthesis and particle characterization by hole in a tube sampling and scanning mobility particle sizing (HIAT-SMPS)
R. Tischendorf, O. Massopo, H.-J. Schmid, O. Pyrmak, S. Dupont, F. Fröde, H. Pitsch, R. Kneer, eds., Maghemite Nanoparticles Synthesis via Spray Flame Synthesis and Particle Characterization by Hole in a Tube Sampling and Scanning Mobility Particle Sizing (HIAT-SMPS), Elsevier, 2024.
LibreCat: /record/51133
DOI: https://doi.org/10.1016/j.jaecs.2023.100235

Evaluation of Surrogate Aerosol Experiments to Predict Spreading and Removal of Virus-Laden Aerosols
J. Beimdiek, H.-J. Schmid, Atmosphere (2024).
LibreCat: /record/51731

Evaluation of Surrogate Aerosol Experiments to Predict Spreading and Removal of Virus-Laden Aerosols
J. Beimdiek, H.-J. Schmid, Atmosphere 15 (2024).
LibreCat: /record/52357
DOI:  10.3390/atmos15030305

Instabilities of Polymer Melt Suspensions under Uniaxial Extension (Poster)
M. Neukötter, S. Jesinghausen, H.-J. Schmid, in: 2023.
LibreCat: /record/44102

Experimental and simulative determination and correction of the effective gap extension in structured coaxial measuring systems
S. Josch, S. Jesinghausen, C. Dechert, H.-J. Schmid, Rheologica Acta (2023).
LibreCat: /record/36983
DOI: 10.1007/s00397-023-01383-2

CDMA: Centrifugal Differential Mobility Analyzer - Ein Messprinzip zur Bestimmung von Multidimensionalen Partikeleigenschaften (Vortrag)
T. Rüther, H.-J. Schmid, in: 2023.
LibreCat: /record/43236

Development of an adaptive coaxial concrete rheometer and rheological characterisation of fresh concrete
S. Josch, S. Jesinghausen, H.-J. Schmid, Applied Rheology 33 (2023).
LibreCat: /record/43034
DOI: 10.1515/arh-2022-0140

Flowability of polymer powders at elevated temperatures for additive manufacturing
M.J. Rüther, S.H. Klippstein, S. Ponusamy, T. Rüther, H.-J. Schmid, Powder Technology 422 (2023).
LibreCat: /record/43128
DOI: 10.1016/j.powtec.2023.118460

Dynamisch-mechanische Polymerpartikelverrundung zur Verbesserung der Fließfähigkeit für das selektive Lasersintern
S. Ponusamy, H.-J. Schmid, in: 2023.
LibreCat: /record/44244

Particles as Seeds for Instabilities in Uniaxially Elongated Polymer Suspension Filaments (Presentation)
M. Neukötter, S. Jesinghausen, H.-J. Schmid, in: 2023.
LibreCat: /record/44103

Influence of the filler–matrix adhesion and the effects of conditioning on tensile properties of laser-sintered parts built with polyamide–glass bead dry blends
I. Kletetzka, M. Kosanke, D. Meinderink, V. Neßlinger, G. Grundmeier, H.-J. Schmid, Progress in Additive Manufacturing (2023).
LibreCat: /record/46815
DOI: 10.1007/s40964-023-00501-z

Influence of a prolonged shelf time on P laser sintering powder and resulting part properties
S.H. Klippstein, I. Kletetzka, I. Sural, H.-J. Schmid, The International Journal of Advanced Manufacturing Technology  (2023).
LibreCat: /record/43046
DOI: https://doi.org/10.1007/s00170-023-11243-1

Case Study IV: Individualized Medical Technology using Additive Manufacturing
D. Menge, D. Milaege, K.-P. Hoyer, H.-J. Schmid, M. Schaper, in: I. Horwath, S. Schweizer (Eds.), Climate Protection, Resource Efficiency, and Sustainable Engineering, transcript Verlag, Bielefeld, Germany, 2023.
LibreCat: /record/46870
DOI: 10.14361/9783839463772-007

Correlation between SLS-Powder processability and particle properties 
M.J. Rüther, S.H. Klippstein, H.-J. Schmid, in: PARTEC International Congress on Particle Technology - Book of Abstracts, VDI Verlag GmbH, Düsseldorf, 2023, pp. 172–176.
LibreCat: /record/47626

Assessing the Impact of the Powder Production Method on Ceramic-filled Polyamide Composites made by Laser Sintering
I. Kletetzka, F. Neitzel, H.-J. Schmid, in: J. Beaman (Ed.), Proceedings of the 34th Annual International Solid Freeform Fabrication Symposium, Laboratory for Freeform Fabrication and University of Texas, Austin, 2023.
LibreCat: /record/46764

Large eddy simulation of iron oxide formation in a laboratory spray flame
F. Fröde, T. Grenga, H. Pitsch, S. Dupont, R. Kneer, R. Tischendorf, O. Massopo, H.-J. Schmid, eds., Large Eddy Simulation of Iron Oxide Formation in a Laboratory Spray Flame, Elsevier, 2023.
LibreCat: /record/51136
DOI: https://doi.org/10.1016/j.jaecs.2023.100191

Influence of atomization on the particle formation in spray flame pyrolysis (Presentation)
O. Massopo, R. Tischendorf, H.-J. Schmid, F. Fröde, T. Grenga, H. Pitsch, M. Bieber, M. Reddemann, R. Kneer, in: 2023.
LibreCat: /record/51147

Nanoparticle Concentration Measurement in Flame Spray Pyrolysis (Poster)
O. Massopo, H.-J. Schmid, M. Gonchikzhapov, T. Kasper, in: 2023.
LibreCat: /record/51145

Einfluss der Zerstäubung auf diePartikelbildung bei der Sprayflammenpyrolyse (Vortrag)
O. Massopo, R. Tischendorf, H.-J. Schmid, F. Fröde, H. Pitsch, M. Reddemann, T. Grenga, R. Kneer, in: 2023.
LibreCat: /record/51142

Neuartige Flugstrom SCR an online synthetisierten, nanoskaligen Katalysatorpartikeln in einem kombinierten Gasreinigungsprozess (Poster)
J. Beimdiek, S. Schiller, H.-J. Schmid, in: Paderborn, 2023.
LibreCat: /record/51726

Entrained flow SCR using an in-situ synthesis of catalyst particles for a combined flue gas cleaning system
J. Beimdiek, S. Schiller, H.-J. Schmid, in: VDI Verlag, Düsseldorf, 2023.
LibreCat: /record/51727

Assessing the Impact of the Powder Production Method on Ceramic-filled Polyamide Composites made by Laser Sintering
I. Kletetzka, F. Neitzel, H.-J. Schmid, in: J. Beaman (Ed.), Proceedings of the 34th Annual International Solid Freeform Fabrication Symposium, Laboratory for Freeform Fabrication and University of Texas, Austin, 2023.
LibreCat: /record/51218
DOI: https://doi.org/10.26153/tsw/50931

Halogen-Free Flame Retardant Powder Materials for Laser Sintering: Evaluation and Process Stability Analysis
F. Neitzel, I. Kletetzka, H.-J. Schmid, in: J. Beaman (Ed.), Proceedings of the 34th Annual International Solid Freeform Fabrication Symposium, Laboratory for Freeform Fabrication and University of Texas, Austin, 2023.
LibreCat: /record/46862
DOI: https://doi.org/10.26153/tsw/50926

Model droplet formation in extensional filament stretching within a Filament Extension Atomizer
M. Neukötter, S. Jesinghausen, H.-J. Schmid, Rheologica Acta (2022).
LibreCat: /record/31035
DOI: 10.1007/s00397-022-01339-y

A combined flue gas cleaning system with a novel entrained flow SCR using an online synthesized catalyst (Poster)
J. Beimdiek, H.-J. Schmid, in: 2022.
LibreCat: /record/37424

Innovative Werkstoffherstellung für das Polymer Laser Sintern – Teil 2
M.J. Rüther, S.H. Klippstein, S. Ponusamy, S. Jesinghausen, H.-J. Schmid, Werkstoffe 6 (2022) 18–19.
LibreCat: /record/35729

Innovative Werkstoffherstellung für das Polymer Laser Sintern – Teil 1
M.J. Rüther, S.H. Klippstein, S. Ponusamy, S. Jesinghausen, H.-J. Schmid, Werkstoffe 5 (2022) 28–29.
LibreCat: /record/35724

Combined filtration process for biomass combustion plants to comply with legal requirements (Presentation)
J. Beimdiek, F. Prill, M. König, M. Müller, I. Hartmann, H.-J. Schmid, in: 13th World Filtration Congress Proceedings, 2022.
LibreCat: /record/37436

A combined flue gas cleaning system with a novel entrained flow SCR using online synthesized catalyst particles (Poster)
J. Beimdiek, H.-J. Schmid, in: IAC 2022 Book of Abstacts, 2022.
LibreCat: /record/37426

Novel entrained flow SCR using online synthesized catalyst particles (Poster)
J. Beimdiek, H.-J. Schmid, in: 2022.
LibreCat: /record/37432

Novel entrained flow SCR using online synthesized catalyst particles in flue gas cleaning systems (Presentation)
J. Beimdiek, H.-J. Schmid, in: 2022.
LibreCat: /record/37430

Triggering instabilities of polymer solution suspensions under uniaxial extension  (Presentation)
M. Neukötter, S. Jesinghausen, H.-J. Schmid, in: 2022.
LibreCat: /record/41160

Instability analysis of suspensions with a polymer solution matrix (Presentation)
M. Neukötter, S. Jesinghausen, H.-J. Schmid, in: 2022.
LibreCat: /record/41158

Flowability of polymer powders at elevated temperatures for additive manufacturing
M.J. Rüther, S.H. Klippstein, H.-J. Schmid, in: M.J. Rüther, S.H. Klippstein, H.-J. Schmid (Eds.), 2022.
LibreCat: /record/33695

A novel correction method for the shear rate in a couette rheometer (Vortrag)
T. Rüther, S. Jesinghausen, H.-J. Schmid, in: 2022.
LibreCat: /record/43238

Multidimensional particle characterization: Centrifugal Differential Mobility Analyzer (Poster)
T. Rüther, H.-J. Schmid, in: 2022.
LibreCat: /record/43243

NEW CORRECTION APPROACHES FOR DETERMINING THE TRUE SHEAR RATE IN A COAXIAL-RHEOMETER (Vortrag)
T. Rüther, S. Jesinghausen, H.-J. Schmid, in: 2022.
LibreCat: /record/43240

Powder Spread Process Monitoring in Polymer Laser Sintering and its Influences on Part Properties
S.H. Klippstein, F. Heiny, N. Pashikanti, M. Gessler, H.-J. Schmid, JOM - The Journal of The Minerals, Metals &; Materials Society (TMS) 74 (2022) 1149–1157.
LibreCat: /record/30228
DOI: https://doi.org/10.1007/s11837-021-05042-w 

Powder Spread Flaws in Polymer Laser Sintering and its Influences on Mechanical Performance
S.H. Klippstein, H.-J. Schmid, in: Proceedings of the 33nd Annual International Solid Freeform Fabrication Symposium, Austin, TX, USA, 2022.
LibreCat: /record/33356

A Shape Newton Scheme for Deforming Shells with Application to Capillary Bridges
S. Schmidt, M. Gräßer, H.-J. Schmid, SIAM Journal on Scientific Computing 44 (2022) 75–94.
LibreCat: /record/44468
DOI: 10.1137/20m1389054

Low Temperature Laser Sintering with P and P on a Standard System
D. Menge, H.-J. Schmid, Macromolecular Symposia 404 (2022).
LibreCat: /record/44469
DOI: 10.1002/masy.202100397

Effects of spherical fillers on the processability and mechanical properties of  and PP-based LS dry blends
I. Kletetzka, R. Gawlikowicz, H.-J. Schmid, in: Proceedings of the 33th Annual International Solid Freeform Fabrication Symposium, Laboratory for Freeform Fabrication and University of Texas, Austin, 2022.
LibreCat: /record/30220
DOI: http://dx.doi.org/10.26153/tsw/44558

Shelf Life of Polyamide 12 () Laser Sintering Powder
I. Kletetzka, S.H. Klippstein, H.-J. Schmid, in: Proceedings of the 33th Annual International Solid Freeform Fabrication Symposium, Laboratory for Freeform Fabrication and University of Texas, Austin, 2022.
LibreCat: /record/32874
DOI: http://dx.doi.org/10.26153/tsw/44555

Mechanical characterization and numerical modeling of laser-sintered TPE lattice structures
C. Kummert, H.-J. Schmid, L. Risse, G. Kullmer, Journal of Materials Research (2021).
LibreCat: /record/25142
DOI: 10.1557/s43578-021-00321-3

Low Temperature Laser Sintering on a Standard System: First Attempts and Results with P
D. Menge, H.-J. Schmid, in: 2021.
LibreCat: /record/23760

Einfluss der Zerstäubung auf die Partikelsynthese in Sprayflammen
R. Tischendorf, H.-J. Schmid, M. Bieber, M. Reddemann, R. Kneer, F. Fröde, T. Grenga, H. Pitsch, in: Paderborn, 2021.
LibreCat: /record/30364

Charakterisierung des Fließverhaltens von Frischbeton – Entwicklung eines adaptiven Rheometers (ACCR) und Einfluss von Maßnahmen zur Sedimentationsprävention
S. Pawelczyk, S. Jesinghausen, H.-J. Schmid, Charakterisierung des Fließverhaltens von Frischbeton – Entwicklung eines adaptiven Rheometers (ACCR) und Einfluss von Maßnahmen zur Sedimentationsprävention, Digitales Jahrestreffen der ProcessNet Fachgruppen MPH und CFD, 2021.
LibreCat: /record/24202

Flowability Measurements of Different SLS Materials at Elevated Temperatures with a Modified Schulze Ring Shear Tester
M.J. Rüther, D. Schulze, H.-J. Schmid, in: digital, 2021.
LibreCat: /record/30225

Effektivität von Luftreinigern zur Reduzierung des COVID-19-Infektionsrisikos/ Efficacy of air purifiers in reducing the risk of COVID-19 infections
S. Schumacher, C. Asbach, H.-J. Schmid, Gefahrstoffe (2021) 16–28.
LibreCat: /record/26095
DOI: 10.37544/0949-8036-2021-01-02-18

Assessing spreading and removal of virus laden aerosols in different settings using an aerosol method (Presentation)
J. Ludwig, C. Kykal, H.-J. Schmid, in: The Aerosol Society (Ed.), Book of Abstracts for the 2021 European Aerosol Conference, 2021.
LibreCat: /record/27551