W. Homberg, D. Hornjak, C. Beerwald, T. Rostek, J. Kunert, and D. Wilk, Incremental forming of tubes and sheets assisted by friction-induced heating. Auerbach, 2009.
LibreCat: /record/21476

W. Homberg and T. Rostek, “High Performance Active Elements for Agricultural Machines Made of Ultra High-Strength Steels,”10.4028/www.scientific.net/kem.473.229__Key Engineering Materials, pp. 229–234, 2011, doi:10.4028/www.scientific.net/kem.473.229 .
LibreCat: /record/21456
DOI: 10.4028/www.scientific.net/kem.473.229

T. Mennecart, T. Rostek, J. Witulski, A. Brosius, A. E. Takkaya, and W. Homberg, “Presshärten von Rohren und Profilen mittels formlos fester Stoffe.” Meisenbach, Erlangen, 2011.
LibreCat: /record/21472

W. Homberg and T. Rostek, “High Performance Active Elements for Agricultural Machines Made of Ultra High-Strength Steels,” 2011.
LibreCat: /record/21474

A. E. Tekkaya, T. Mennecart, J. Witulski, W. Homberg, and T. Rostek, Presshärten von Rohren und Profilen mittels formlos festen Stoffen. Düsseldorf: Verlag und Vertriebsgesellschaft mbH, 2012.
LibreCat: /record/21470

D. Hornjak, Grundlegende Untersuchung der Prozess- und Werkzeugparameter und ihrer Wechselwirkungen für das thermo-mechanisch unterstützte inkrementelle Umformverfahren des Reib-Drückens. 2013.
LibreCat: /record/42769

W. Homberg and T. Rostek, Hochleistungsaktivelemente für landwirtschaftliche Maschinen aus ultrahochfestem Stahl. Düsseldorf: Verlag und Vertriebsgesellschaft mbH, 2013.
LibreCat: /record/21469

W. Homberg and T. Rostek, “Thermo-Mechanical Hardening of Ultra High-Strength Steels,”10.4028/www.scientific.net/kem.549.133__Key Engineering Materials, pp. 133–140, 2013, doi:10.4028/www.scientific.net/kem.549.133 .
LibreCat: /record/21455
DOI: 10.4028/www.scientific.net/kem.549.133

W. Homberg and T. Rostek, “Processing of Ultra High-Strength Steels involving Thermo-mechanical Hardening Effects,” 2013.
LibreCat: /record/21468

T. Rostek, Ein Beitrag zur Verarbeitung von Dickblech aus utlrahochfesten Stahlwerkstoffen. Aachen: Shaker Verlag, 2015.
LibreCat: /record/21464

W. Homberg and T. Rostek, “Innovative Processing Techniques for the Manufacture of High-Performance Active Elements from Ultra High-Strength Steel Plate,” 2015.
LibreCat: /record/21467

W. Homberg, T. Rostek, and E. Wiens, “Internal Flow-Turning - An Innovative Technology for the Manufacture of Tailored Tubes,”10.4028/www.scientific.net/kem.639.65__in Key Engineering Materials, 2015, vol. 639, pp. 65–70, doi:10.4028/www.scientific.net/kem.639.65 .
LibreCat: /record/21454
DOI: 10.4028/www.scientific.net/kem.639.65

T. Rostek and W. Homberg, “Layered Steel Materials for the Manufacture of Self-Sharpening Cutting Blades,” International Journal of Material Forming, 2016.
LibreCat: /record/21466

B. Lossen, A. Andreiev, W. Homberg, and M. Schaper, “Friction-Spinning – Possibility of Grain Structure Adjustment,” Procedia Engineering, pp. 1749–1754, 2017.
LibreCat: /record/23909
DOI: 10.1016/j.proeng.2017.10.933

P. Spoelstra, E. Djakow, and W. Homberg, “Rubber pad forming - Efficient approach for the manufacturing of complex structured sheet metal blanks for food industry,” 2017.
LibreCat: /record/15032
DOI: 10.1063/1.5008084

E. Djakow et al., “Incremental electrohydraulic forming - A new approach for the manufacture of structured multifunctional sheet metal blanks,” 2017.
LibreCat: /record/15033
DOI: 10.1063/1.5008083

T. Rostek and W. Homberg, “Locally Graded Steel Materials for Self-Sharpening Cutting Blades,”10.1016/j.proeng.2017.10.979__Procedia Engineering, vol. 207, pp. 2185–2190, 2017, doi:10.1016/j.proeng.2017.10.979 .
LibreCat: /record/21449
DOI: 10.1016/j.proeng.2017.10.979

W. Homberg et al., “Development of hybrid directionally reinforced structural parts for lightweight applications,”10.1063/1.5008055__vol. 1896, no. 1. AIP Publishing, 2017, doi:10.1063/1.5008055 .
LibreCat: /record/21452
DOI: 10.1063/1.5008055

T. Rostek and W. Homberg, “Locally Graded Steel Materials for Self-Sharpening Cutting Blades,”10.1016/j.proeng.2017.10.979__vol. 207. Elsevier Ltd, pp. 2185–2190, 2017, doi:10.1016/j.proeng.2017.10.979 .
LibreCat: /record/21453
DOI: 10.1016/j.proeng.2017.10.979

E. Wiens and W. Homberg, “Internal Flow-Turning – a new approach for the manufacture of tailored tubes with a constant external diameter,”10.1016/j.proeng.2017.10.934__Procedia Engineering, vol. 207, pp. 1755–1760, 2017, doi:10.1016/j.proeng.2017.10.934 .
LibreCat: /record/30259
DOI: 10.1016/j.proeng.2017.10.934

E. Wiens and W. Homberg, “Internal flow-turning – efficient manufacture of load-adapted tubes with a constant external diameter,” presented at the International Conference on Steels in Cars and Trucks SCT, Amsterdam, 2017.
LibreCat: /record/30261

E. Wiens, “Walzen statt drehen,” Bänder Bleche Rohre, vol. bbr 2, p. 59, 2017.
LibreCat: /record/30260

U. Diekmann et al., “Optimization of Tooling Design for Hot Mandrel Bending of Pipe Elbows,”10.4028/www.scientific.net/msf.918.159__in Materials Science Forum, 2018, vol. 918, pp. 159–164, doi:10.4028/www.scientific.net/msf.918.159 .
LibreCat: /record/21457
DOI: 10.4028/www.scientific.net/msf.918.159

T. Rostek and W. Homberg, “Grading Technologies for the Tanufacture of Innovative Cutting Blades,”10.1063/1.5034953__in AIP Conference Proceedings 1960, 100013, 2018, vol. 1960, no. 1, doi:10.1063/1.5034953 .
LibreCat: /record/21458
DOI: 10.1063/1.5034953

W. Homberg et al., “Hybride Verbundstrukturen aus Aluminium und Titan für Leichtbauanwendungen.” Universität Paderborn, Paderborn, pp. 28–33, 2018.
LibreCat: /record/21465

E. Wiens and W. Homberg, Herstellung innovativer Stahlhalbzeuge mit wanddicke- und festigkeitsveränderlichen Eigenschaften für den Leichtbau durch Innendrückwalzen (IDW), vol. P 948. Düsseldorf, 2018.
LibreCat: /record/30257

E. Wiens and W. Homberg, “Internal Flow-Turning – extended manufacturing possibilities in tailored tube production,”10.1051/matecconf/201819011002__MATEC Web of Conferences, Art. no. 11002, 2018, doi:10.1051/matecconf/201819011002 .
LibreCat: /record/15067
DOI: 10.1051/matecconf/201819011002

A. A. Camberg et al., “LHYBS – Lightweight Design by Novel Hybrid Materials,” presented at the 8th NRW Nano Conference, Innovations in Materials and Applications, Dortmund, 2018.
LibreCat: /record/16050

B. Lossen, A. Andreiev, M. Stolbchenko, W. Homberg, and M. Schaper, “Friction-spinning—Grain structure modification and the impact on stress/strain behaviour,”10.1016/j.jmatprotec.2018.06.015__Journal of Materials Processing Technology, pp. 242–250, 2018, doi:10.1016/j.jmatprotec.2018.06.015 .
LibreCat: /record/23903
DOI: 10.1016/j.jmatprotec.2018.06.015

T. Heggemann and W. Homberg, “Deep drawing of fiber metal laminates for automotive lightweight structures,” Composite Structures, pp. 53–57, 2019.
LibreCat: /record/21443
DOI: 10.1016/j.compstruct.2019.02.047

F. Bader, F. Hengsbach, K.-P. Hoyer, W. Homberg, and M. Schaper, “Intrinsically lubricated tool inserts for deep drawing applications generated by selective laser melting,” in PROCEEDINGS OF THE 22ND INTERNATIONAL ESAFORM CONFERENCE ON MATERIAL FORMING: ESAFORM 2019, 2019.
LibreCat: /record/15024
DOI: 10.1063/1.5112720

W. Tillmann et al., “Al2O3/ZrO2-8O3 and (Cr,Ti)AlSiN tool coatings to influence the temperature and surface quality in friction-spinning processes,” Production Engineering, pp. 449–457, 2019.
LibreCat: /record/15028
DOI: 10.1007/s11740-019-00899-y

E. Djakow, Ein Beitrag zur kombinierten (quasi-)statischen und dynamischen Umformung von blechförmigen Halbzeugen. Düren: Shaker, 2019.
LibreCat: /record/15030
DOI: ISBN 978-3-8440-6723-1

M. Linnemann, V. Psyk, E. Djakow, R. Springer, W. Homberg, and D. Landgrebe, “High-Speed Incremental Forming – New Technologies For Flexible Production Of Sheet Metal Parts,” Procedia Manufacturing, pp. 21–26, 2019.
LibreCat: /record/15031
DOI: 10.1016/j.promfg.2018.12.038

M. Piper, A. Zibart, E. Djakow, R. Springer, W. Homberg, and E. Y. Kenig, “Heat transfer enhancement in pillow-plate heat exchangers with dimpled surfaces: A numerical study,” Applied Thermal Engineering, pp. 142–146, 2019.
LibreCat: /record/15036
DOI: 10.1016/j.applthermaleng.2019.02.082

E. Djakow, Ein Beitrag zur kombinierten (quasi-)statischen und dynamischen Umformung von blechförmigen Halbzeugen. 2019.
LibreCat: /record/42789

D. Tabakajew, Simulationsgestützte Analyse und Optimierung der Umformung geschlossener Stahlprofile mittels Hamburger Verfahren. 2019.
LibreCat: /record/42810

H. C. Schmidt, Ein Beitrag zum stoffschlüssigen Fügen durch plastische Deformation: partielles Kaltpressschweißen durch inkrementelles Walzen. 2019.
LibreCat: /record/42809

B. Lossen, Ein Beitrag zur Herstellung von hybriden Bauteilen mittels Reibdrücken. 2019.
LibreCat: /record/42799

T. Rostek and W. Homberg, “Improved set up strategies for steel strip straightening machines,”10.1063/1.5112734__in AIP Conference Proceedings 2113, 170018, 2019, vol. 2113, no. 1, doi:10.1063/1.5112734 .
LibreCat: /record/21451
DOI: 10.1063/1.5112734

E. Wiens and W. Homberg, “Forming analysis of tailored tubes with an internal contoured wall thickness and external axial ribs manufactured by internal flow-turning,”10.1063/1.5112535__presented at the ESAFORM 2019, 2019, doi:10.1063/1.5112535 .
LibreCat: /record/15068
DOI: 10.1063/1.5112535

T. Heggemann, W. Homberg, and H. Sapli, “Combined Curing and Forming of Fiber Metal Laminates,” Procedia Manufacturing, pp. 36–42, 2020.
LibreCat: /record/21444
DOI: 10.1016/j.promfg.2020.04.118

H. Sapli, T. Heggemann, and W. Homberg, “Combined Curing and Deep Drawing of Fiber Metal Laminates to Spherical Hybrid Components,” presented at the 4th International Conference of Materials and Structures - Hybrid 2020, Karlsruhe, 2020.
LibreCat: /record/21522

J. Rozo Vasquez, B. Arian, M. Riepold, W. Homberg, A. Trächtler, and F. Walther, “Microstructural investigation on phase transformation during flow forming of the metastable austenite AISI 304 ,” in  54. Metallographie-Tagung, 2020, pp. 75–81.
LibreCat: /record/22965

T. Rostek, E. Wiens, and W. Homberg, “Joining with Versatile Friction-Spun Joint Connectors,”10.1016/j.promfg.2020.04.313__Procedia Manufacturing, vol. 47, pp. 395–399, 2020, doi:10.1016/j.promfg.2020.04.313 .
LibreCat: /record/30713
DOI: 10.1016/j.promfg.2020.04.313

E. Wiens, E. Djakow, and W. Homberg, “Some ideas for the further development of hydroforming process chains,” 2020.
LibreCat: /record/21447

T. Heggemann, H. Sapli, and W. Homberg, “Experimental and Numerical Investigations into the Influence of the Process Parameters During the Deep Drawing of Fiber Metal Laminates,” in Forming the Future, Cham, 2021.
LibreCat: /record/25448
DOI: 10.1007/978-3-030-75381-8_219

D. Voswinkel et al., “Improving the Accuracy of Deep Drawn Fiber-Metal Laminate Parts by Preliminary Surface Treatment,”10.1088/1757-899x/1190/1/012028__IOP Conference Series: Materials Science and Engineering, Art. no. 012028, 2021, doi:10.1088/1757-899x/1190/1/012028 .
LibreCat: /record/26191
DOI: 10.1088/1757-899x/1190/1/012028

F. Bader, L. Bathelt, E. Djakow, W. Homberg, C. Henke, and A. Trächtler, “Innovative Measurement Of Stress Superposed Steel Strip For Straightening Machines,” ESAFORM 2021, 2021.
LibreCat: /record/21633
DOI: 10.25518/esaform21.2382

F. Bader, L. Bathelt, E. Djakow, W. Homberg, C. Henke, and A. Trächtler, “Self-optimized, Intelligent Open-Loop-Controlled Steel Strip Straightening Machine for Advanced Formability,” in Forming the Future, Cham, 2021.
LibreCat: /record/23385
DOI: 10.1007/978-3-030-75381-8_1

C. Wischer, C. Steinfelder, W. Homberg, and A. Brosius, “Joining with Friction Spun Joint Connectors – Manufacturing and Analysis,”10.1088/1757-899x/1157/1/012007__IOP Conference Series: Materials Science and Engineering, vol. 1157, p. 012007, 2021, doi:10.1088/1757-899x/1157/1/012007 .
LibreCat: /record/30649
DOI: 10.1088/1757-899x/1157/1/012007

C. Wischer and W. Homberg, “A contribution on versatile process chains: joining with adaptive joining elements, formed by friction spinning,”10.1007/s11740-021-01094-8__Production Engineering, 2021, doi:10.1007/s11740-021-01094-8 .
LibreCat: /record/30702
DOI: 10.1007/s11740-021-01094-8

T. Borgert and W. Homberg, “Friction-Induced Recycling Process for User-Specific Semi-Finished Product Production,”10.3390/met11040663__Metals, Art. no. 663, 2021, doi:10.3390/met11040663 .
LibreCat: /record/21635
DOI: 10.3390/met11040663

T. Rostek, H. Makeieva, and W. Homberg, “Cutting Blades for Food Processing Applications Manufactured Using Innovative Spin Forming,”10.1007/978-3-030-75381-8_178__in Proceedings of the 13th International Conference on the Technology of Plasticity, Columbus, 2021, pp. 2115–2125, doi:10.1007/978-3-030-75381-8_178 .
LibreCat: /record/21477
DOI: 10.1007/978-3-030-75381-8_178

F. Dahms and W. Homberg, “Investigations and Improvements in 3D-DIC Optical Residual Stress Analysis—A New Temperature Compensation Method,” in Forming the Future, Springer, Cham, 2021, pp. 2249–2259.
LibreCat: /record/22766
DOI: 10.1007/978-3-030-75381-8_189

J. Rozo Vasquez, B. Arian, M. Riepold, F. Walther, W. Homberg, and A. Trächtler, “Magnetic Barkhausen noise analysis for microstructural effects separation during flow forming of metastable austenite 304L.,” presented at the ENDT&;CM 2021 - 11th International Work­shop NDT in Progress, Prague, 2021.
LibreCat: /record/30297

B. Arian, W. Homberg, M. Riepold, A. Trächtler, J. Rozo Vasquez, and F. Walther, “Forming of metastable austenitic stainless steel tubes with axially graded martensite content by flow-forming,” presented at the 24th International Conference on Material Forming - ESAFORM 2021, Liège, Belgium, 2021.
LibreCat: /record/23465

E. Wiens, W. Homberg, B. Arian, K. Möhring, and F. Walther, “Forming of Parts with Locally Defined Mechanical and Ferromagnetic Properties by Flow-Forming,” in Forming the Future, Cham: Springer International Publishing, 2021.
LibreCat: /record/30296
DOI: 10.1007/978-3-030-75381-8_160

C. Wischer, E. Wiens, and W. Homberg, “Joining with versatile joining elements formed by friction spinning,”10.1016/j.jajp.2021.100060__Journal of Advanced Joining Processes, vol. 3, Art. no. 100060, 2021, doi:10.1016/j.jajp.2021.100060 .
LibreCat: /record/26082
DOI: 10.1016/j.jajp.2021.100060

E. Wiens, C. Wischer, and W. Homberg, Eds., Development of a novel adaptive joining technology employing Friction-Spun Joint Connectors (FSJC). 2021.
LibreCat: /record/22453
DOI: 10.25518/esaform21.4682

M. Riepold, B. Arian, J. R. Vasquez, W. Homberg, F. Walther, and A. Trächtler, “Model approaches for closed-loop property control for flow forming,”10.1016/j.aime.2021.100057__Advances in Industrial and Manufacturing Engineering, Art. no. 100057, 2021, doi:10.1016/j.aime.2021.100057 .
LibreCat: /record/23469
DOI: 10.1016/j.aime.2021.100057

P. Vieth, T. Borgert, W. Homberg, and G. Grundmeier, “Assessment of mechanical and optical properties of Al 6060 alloy particles by removal of contaminants,”10.1002/adem.202201081__Advanced Engineering Materials, 2022, doi:10.1002/adem.202201081 .
LibreCat: /record/33724
DOI: 10.1002/adem.202201081

G. Meschut et al., “Review on mechanical joining by plastic deformation,”10.1016/j.jajp.2022.100113__Journal of Advanced Joining Processes, vol. 5, Art. no. 100113, 2022, doi:10.1016/j.jajp.2022.100113 .
LibreCat: /record/34216
DOI: 10.1016/j.jajp.2022.100113

T. Borgert and W. Homberg, “Energy saving potentials of an efficient recycling process of different aluminum rejects,”10.1016/j.egyr.2022.01.027__Energy Reports, vol. 8, pp. 399–404, 2022, doi:10.1016/j.egyr.2022.01.027 .
LibreCat: /record/29719
DOI: 10.1016/j.egyr.2022.01.027

D. Engemann and W. Homberg, “Hot Spinning of Cutting Blades for Food Industry,” presented at the Esaform 2022, Braga - Portugal.
LibreCat: /record/30292

A. Oesterwinter, C. Wischer, and W. Homberg, “Identification of Requirements for FE Modeling of an Adaptive Joining Technology Employing Friction-Spun Joint Connectors (FSJC),”10.3390/met12050869__Metals, vol. 12, no. 5, Art. no. 869, 2022, doi:10.3390/met12050869 .
LibreCat: /record/31360
DOI: 10.3390/met12050869

C. Wischer and W. Homberg, “Further Development of an Adaptive Joining Technique Based on Friction Spinning to Produce Pre-Hole-Free Joints,”10.4028/p-1n6741__Key Engineering Materials, vol. 926, pp. 1468–1478, 2022, doi:10.4028/p-1n6741 .
LibreCat: /record/37647
DOI: 10.4028/p-1n6741

T. Heggemann, V. Psyk, A. Oesterwinter, M. Linnemann, V. Kräusel, and W. Homberg, “Comparative Analysis of Electrohydraulic and Electromagnetic Sheet Metal Forming against the Background of the Application as an Incremental Processing Technology,”10.3390/met12040660__Metals, vol. 12, no. 4, 2022, doi:10.3390/met12040660 .
LibreCat: /record/30885
DOI: 10.3390/met12040660

E. Wiens, Innendrückwalzen – Ein innovatives Umformverfahren zur inkrementellen Formgebung von wanddickenkonturierten Rohren mit lokal einstellbaren mechanischen Eigenschaften. 2022.
LibreCat: /record/42813

F. Dahms and W. Homberg, “Manufacture of Defined Residual Stress Distributions in the Friction-Spinning Process: Driven Tool and Subsequent Flow-Forming,”10.4028/p-3rk19y__Key Engineering Materials, vol. 926, pp. 683–689, 2022, doi:10.4028/p-3rk19y .
LibreCat: /record/32412
DOI: 10.4028/p-3rk19y

F. Dahms and W. Homberg, “Manufacture of Defined Residual Stress Distributions in the Friction-Spinning Process: Investigations and Run-to-Run Predictive Control,”10.3390/met12010158__Metals, vol. 12, no. 1, Art. no. 158, 2022, doi:10.3390/met12010158 .
LibreCat: /record/29357
DOI: 10.3390/met12010158

L. Bathelt, F. Bader, E. Djakow, C. Henke, A. Trächtler, and W. Homberg, “Innovative assistance system for setting up a mechatronic straightening machine,”https://doi.org/10.4028/p-vs07w9__presented at the ESAFORM 2022, Braga / Portugal, 2022, doi:https://doi.org/10.4028/p-vs07w9 .
LibreCat: /record/30263
DOI: https://doi.org/10.4028/p-vs07w9

F. Bader, L. Bathelt, E. Djakow, C. Henke, W. Homberg, and A. Trächtler, “An approach for an innovative 3d steel strip straightening machine for curvature and saber compensation,”https://doi.org/10.4028/p-87wvu0__presented at the ESAFORM 2022, Braga / Portugal, 2022, doi:https://doi.org/10.4028/p-87wvu0 .
LibreCat: /record/30265
DOI: https://doi.org/10.4028/p-87wvu0

L. Bathelt, F. Bader, E. Djakow, C. Henke, A. Trächtler, and W. Homberg, “Mechatronische Richtapparate: Intelligente Richttechnik von hochfesten Flachdrähten,” in Fachtagung VDI MECHATRONIK 2022 , Darmstadt, 2022, pp. 19–24.
LibreCat: /record/33978

J. Rozo Vasquez et al., “Coupled microscopic and micromagnetic depth-specific analysis of plastic deformation and phase transformation of metastable austenitic steel AISI 304L by flow forming,”10.1515/pm-2022-0064__Practical Metallography, vol. 59, no. 11, pp. 660–675, 2022, doi:10.1515/pm-2022-0064 .
LibreCat: /record/34000
DOI: 10.1515/pm-2022-0064

L. Kersting, B. Arian, J. R. Vasquez, A. Trächtler, W. Homberg, and F. Walther, “Innovative Online Measurement and Modelling Approach for Property-Controlled Flow Forming Processes,”10.4028/p-yp2hj3__Key Engineering Materials, vol. 926, pp. 862–874, 2022, doi:10.4028/p-yp2hj3 .
LibreCat: /record/33999
DOI: 10.4028/p-yp2hj3

J. Rozo Vasquez, F. Walther, B. Arian, W. Homberg, L. Kersting, and A. Trächtler, “Soft sensor concept for micromagnetic depth-specific analysis of phase transformation during flow forming of AISI 304L steel.,” presented at the ICBM 14, 14th International Conference on Barkhausen Noise and Micromagnetic Testing, Stockholm, 2022.
LibreCat: /record/36563

L. Kersting, A. Trächtler, B. Arian, W. Homberg, J. Rozo Vasquez, and F. Walther, Echtzeitfähige Modellierung eines innovativen Drückwalzprozesses für die eigenschaftsgeregelte Herstellung gradierter Bauteile. Magdeburg: Diedrich, 2022.
LibreCat: /record/36412

E. Wiens, Innendrückwalzen – Ein innovatives Umformverfahren zur inkrementellen Formgebung von wanddickenkonturierten Rohren mit lokal einstellbaren mechanischen Eigenschaften. Düren: Shaker, 2022.
LibreCat: /record/30255

B. Arian, W. Homberg, L. Kersting, A. Trächtler, and J. Rozo Vasquez, “Produktkennzeichnung durch lokal definierte Einstellung von ferromagnetischen Eigenschaften beim Drückwalzen von metastabilen Stahlwerkstoffen,” in 36. Aachener Stahlkolloquium – Umformtechnik “Ideen Form geben“, 2022, pp. 333–347.
LibreCat: /record/34001

B. Arian et al., “A flow forming process model to predict workpiece properties in AISI 304L,” 2022.
LibreCat: /record/34003

T. Borgert and W. Homberg, “Analysis of temperature effect on strength and microstructure in friction induced recycling process (FIRP),”10.21741/9781644902479-211__presented at the ESAFORM 2023, Kraków, 2023, doi:10.21741/9781644902479-211 .
LibreCat: /record/44036
DOI: 10.21741/9781644902479-211

F. Dahms and W. Homberg, “Energy and Resource-efficient Forming of Gas Cylinders by Friction-Spinning,”10.21741/9781644902479-208__presented at the ESAFORM 2023, Krakau, 2023, doi:10.21741/9781644902479-208 .
LibreCat: /record/44035
DOI: 10.21741/9781644902479-208

M. Holzmüller, M. Linnemann, W. Homberg, V. Psyk, V. Kräusel, and J. Kroos, “Proof of concept for incremental sheet metal forming by means of electromagnetic and electrohydraulic high-speed forming,”10.21741/9781644902417-2__in Materials Research Proceedings, Nürnberg, 2023, vol. 25, pp. 11–18, doi:10.21741/9781644902417-2 .
LibreCat: /record/43044
DOI: 10.21741/9781644902417-2

M. Knyazyev, M. Holzmüller, and W. Homberg, “Investigation of Pressure Fields Generated by Two Simultaneous Discharges in Liquid Initiated by Wires,”10.3390/jmmp7010040__Journal of Manufacturing and Materials Processing, vol. 7, no. 1, Art. no. 40, 2023, doi:10.3390/jmmp7010040 .
LibreCat: /record/43045
DOI: 10.3390/jmmp7010040

F. Dahms and W. Homberg, “Analysis and Modelling of the Deformation in the Manufacture of Flange-Contours by the Combined Friction-Spinning and Flow-Forming Process,” in Lecture Notes in Mechanical Engineering, Springer Nature Switzerland, 2023.
LibreCat: /record/46691
DOI: 10.1007/978-3-031-41023-9_72

T. Borgert, M. Henke, and W. Homberg, “Investigations on the Influences of the Thermomechanical Manufacturing of Aluminium Auxiliary Joining Elements,”10.3390/jmmp7040147__Journal of Manufacturing and Materials Processing, vol. 7, no. 4, Art. no. 147, 2023, doi:10.3390/jmmp7040147 .
LibreCat: /record/46483
DOI: 10.3390/jmmp7040147

T. Borgert and W. Homberg, “Friction-Induced Recycled Aluminium Semi-finished Products in Thermo-mechanical Joining Technology,” in Lecture Notes in Mechanical Engineering, Cham: Springer Nature Switzerland, 2023.
LibreCat: /record/46752
DOI: 10.1007/978-3-031-41341-4_1

R. Afsahnoudeh, M. Holzmüller, F. Bader, W. Homberg, and E. Y. Kenig, “Numerische Untersuchung von Oberflächenstrukturierung zur Erhöhung der Effizienz von Kissenplatten-Wärmeübertragern,” presented at the Jahrestreffen der DECHEMA-Fachgruppen Computational Fluid Dynamics und Wärme- und Stoffübertragung, Frankfurt am Main, 2023.
LibreCat: /record/28941

L. Kersting, B. Arian, J. Rozo Vasquez, A. Trächtler, W. Homberg, and F. Walther, “Echtzeitfähige Modellierung eines innovativen Drückwalzprozesses für die eigenschaftsgeregelte Bauteilfertigung,”10.1515/auto-2022-0106__at - Automatisierungstechnik, vol. 71, no. 1, pp. 68–81, 2023, doi:10.1515/auto-2022-0106 .
LibreCat: /record/44312
DOI: 10.1515/auto-2022-0106

L. Kersting, B. Arian, J. Rozo Vasquez, A. Trächtler, W. Homberg, and F. Walther, “Control strategy for angular gradations by means of the flow forming process,”10.21741/9781644902479-220__2023, doi:10.21741/9781644902479-220 .
LibreCat: /record/44315
DOI: 10.21741/9781644902479-220

J. Rozo Vasquez, B. Arian, L. Kersting, F. Walther, W. Homberg, and A. Trächtler, “Detection of phase transformation during plastic deformation of metastable austenitic steel AISI 304L by means of X-ray diffraction pattern analysis,” Metals, 2023.
LibreCat: /record/44318

T. Borgert, D. Milaege, S. Schweizer, W. Homberg, M. Schaper, and T. Tröster, “Potentials of a friction-induced recycling process to improve resource and energy efficiency in manufacturing technology,”10.1007/s12289-023-01785-w__International Journal of Material Forming, vol. 16, no. 6, Art. no. 59, 2023, doi:10.1007/s12289-023-01785-w .
LibreCat: /record/47536
DOI: 10.1007/s12289-023-01785-w

J. Rozo Vasquez, B. Arian, L. Kersting, F. Walther, W. Homberg, and A. Trächtler, “Softsensor model of phase transformation during flow forming of metastable austenitic steel AISI 304L,” presented at the The 14th International Conference on Numerical Methods in Industrial Forming Processes (Numiform 2023), Krakau, 2023.
LibreCat: /record/44316

L. Bathelt, M. Scurk, E. Djakow, C. Henke, and A. Trächtler, “Novel Straightening-Machine Design with Integrated Force Measurement for Straightening of High-Strength Flat Wire,”10.3390/s23229091__Sensors, vol. 23, no. 22, 2023, doi:10.3390/s23229091 .
LibreCat: /record/48781
DOI: 10.3390/s23229091

T. Borgert, Reibungsinduzierter Prozess zum nutzerindividuellen und energieeffizienten Recycling von Aluminiumschrotten. 2023.
LibreCat: /record/48072

L. Bathelt, E. Djakow, C. Henke, and A. Trächtler, “Innovative self-learning disturbance compensation for straightening processes,”10.21741/9781644902479-216__2023, doi:10.21741/9781644902479-216 .
LibreCat: /record/48572
DOI: 10.21741/9781644902479-216

L. Bathelt, E. Djakow, F. Dahms, C. Henke, A. Trächtler, and W. Homberg, “Neuartiger Ansatz zum Richten von zwei- und dreidimensionalen Fehlern an einem Federdraht,” presented at the Ilmenauer Federntag 2023, Ilmenau, 2023.
LibreCat: /record/48001

B. Arian, W. Homberg, L. Kersting, A. Trächtler, J. Rozo Vasquez, and F. Walther, “Cryogenic reverse flow forming of AISI 304L,”10.21741/9781644902479-219__2023, doi:10.21741/9781644902479-219 .
LibreCat: /record/44314
DOI: 10.21741/9781644902479-219

S. C. Stebner et al., “Monitoring the evolution of dimensional accuracy and product properties in property-controlled forming processes,”10.48550/ARXIV.2305.19601__Electrical Engineering: Systems and Control, 2023, doi:10.48550/ARXIV.2305.19601 .
LibreCat: /record/49705
DOI: 10.48550/ARXIV.2305.19601