Homberg, Werner, et al. Incremental Forming of Tubes and Sheets Assisted by Friction-Induced Heating. Auerbach, 2009.

Homberg, Werner, and Tim Rostek. “High Performance Active Elements for Agricultural Machines Made of Ultra High-Strength Steels.”10.4028/www.scientific.net/kem.473.229__Key Engineering Materials, 2011, pp. 229–34, doi:10.4028/www.scientific.net/kem.473.229.

Mennecart, Thomas, et al. Presshärten von Rohren und Profilen mittels formlos fester Stoffe. Meisenbach, 2011.

Homberg, Werner, and Tim Rostek. “High Performance Active Elements for Agricultural Machines Made of Ultra High-Strength Steels.” Proceedings. of the 10th International Conference on Technology of Plasticity (ICTP), Springer, 2011.

Tekkaya, A. Erman, et al. Presshärten von Rohren und Profilen mittels formlos festen Stoffen. Verlag und Vertriebsgesellschaft mbH, 2012.

Hornjak, Daniel. Grundlegende Untersuchung der Prozess- und Werkzeugparameter und ihrer Wechselwirkungen für das thermo-mechanisch unterstützte inkrementelle Umformverfahren des Reib-Drückens. 2013.

Homberg, Werner, and Tim Rostek. Hochleistungsaktivelemente für landwirtschaftliche Maschinen aus ultrahochfestem Stahl. Verlag und Vertriebsgesellschaft mbH, 2013.

Homberg, Werner, and Tim Rostek. “Thermo-Mechanical Hardening of Ultra High-Strength Steels.”10.4028/www.scientific.net/kem.549.133__Key Engineering Materials, 2013, pp. 133–40, doi:10.4028/www.scientific.net/kem.549.133.

Homberg, Werner, and Tim Rostek. Processing of Ultra High-Strength Steels Involving Thermo-Mechanical Hardening Effects. Proc. IDDRG 2013, 2013.

Rostek, Tim. Ein Beitrag zur Verarbeitung von Dickblech aus utlrahochfesten Stahlwerkstoffen. Shaker Verlag, 2015.

Homberg, Werner, and Tim Rostek. Innovative Processing Techniques for the Manufacture of High-Performance Active Elements from Ultra High-Strength Steel Plate. 2015.

Homberg, Werner, et al. “Internal Flow-Turning - An Innovative Technology for the Manufacture of Tailored Tubes.”10.4028/www.scientific.net/kem.639.65__Key Engineering Materials, edited by M. Merklein et al., vol. 639, Trans Tech Publications Ltd, 2015, pp. 65–70, doi:10.4028/www.scientific.net/kem.639.65.

Rostek, Tim, and Werner Homberg. “Layered Steel Materials for the Manufacture of Self-Sharpening Cutting Blades.” International Journal of Material Forming, 2016.

Lossen, Benjamin, et al. “Friction-Spinning – Possibility of Grain Structure Adjustment.”10.1016/j.proeng.2017.10.933__Procedia Engineering, 2017, pp. 1749–54, doi:10.1016/j.proeng.2017.10.933.

Spoelstra, Paul, et al. Rubber Pad Forming - Efficient Approach for the Manufacturing of Complex Structured Sheet Metal Blanks for Food Industry. 2017, doi:10.1063/1.5008084.

Djakow, Eugen, et al. Incremental Electrohydraulic Forming - A New Approach for the Manufacture of Structured Multifunctional Sheet Metal Blanks. 2017, doi:10.1063/1.5008083.

Rostek, Tim, and Werner Homberg. “Locally Graded Steel Materials for Self-Sharpening Cutting Blades.”10.1016/j.proeng.2017.10.979__Procedia Engineering, vol. 207, Elsevier Ltd, 2017, pp. 2185–90, doi:10.1016/j.proeng.2017.10.979.

Homberg, Werner, et al. Development of Hybrid Directionally Reinforced Structural Parts for Lightweight Applications. no. 1, AIP Publishing, 2017, doi:10.1063/1.5008055.

Rostek, Tim, and Werner Homberg. Locally Graded Steel Materials for Self-Sharpening Cutting Blades. Edited by J. Allwood, vol. 207, Elsevier Ltd, 2017, pp. 2185–90, doi:10.1016/j.proeng.2017.10.979.

Wiens, Eugen, and Werner Homberg. “Internal Flow-Turning – a New Approach for the Manufacture of Tailored Tubes with a Constant External Diameter.”10.1016/j.proeng.2017.10.934__Procedia Engineering, vol. 207, Elsevier BV, 2017, pp. 1755–60, doi:10.1016/j.proeng.2017.10.934.

Wiens, Eugen, and Werner Homberg. “Internal Flow-Turning – Efficient Manufacture of Load-Adapted Tubes with a Constant External Diameter.” Proceedings of the International Conference on Steels in Cars and Trucks SCT 2017, 2017.

Wiens, Eugen. “Walzen Statt Drehen.” Bänder Bleche Rohre, vol. bbr 2, 2017, p. 59.

Diekmann, Uwe, et al. “Optimization of Tooling Design for Hot Mandrel Bending of Pipe Elbows.”10.4028/www.scientific.net/msf.918.159__Materials Science Forum, vol. 918, Trans Tech Publications Ltd, 2018, pp. 159–64, doi:10.4028/www.scientific.net/msf.918.159.

Rostek, Tim, and Werner Homberg. “Grading Technologies for the Tanufacture of Innovative Cutting Blades.”10.1063/1.5034953__AIP Conference Proceedings 1960, 100013, vol. 1960, no. 1, AIP Publishing, 2018, doi:10.1063/1.5034953.

Homberg, Werner, et al. Hybride Verbundstrukturen Aus Aluminium Und Titan Für Leichtbauanwendungen. Universität Paderborn, 2018, pp. 28–33.

Wiens, Eugen, and Werner Homberg. Herstellung innovativer Stahlhalbzeuge mit wanddicke- und festigkeitsveränderlichen Eigenschaften für den Leichtbau durch Innendrückwalzen (IDW). 2018.

Wiens, Eugen, and Werner Homberg. “Internal Flow-Turning – Extended Manufacturing Possibilities in Tailored Tube Production.”10.1051/matecconf/201819011002__MATEC Web of Conferences, 11002, 2018, doi:10.1051/matecconf/201819011002.

Camberg, Alan Adam, et al. LHYBS – Lightweight Design by Novel Hybrid Materials. 2018.

Lossen, Benjamin, et al. “Friction-Spinning—Grain Structure Modification and the Impact on Stress/Strain Behaviour.”10.1016/j.jmatprotec.2018.06.015__Journal of Materials Processing Technology, 2018, pp. 242–50, doi:10.1016/j.jmatprotec.2018.06.015.

Heggemann, Thomas, and Werner Homberg. “Deep Drawing of Fiber Metal Laminates for Automotive Lightweight Structures.”10.1016/j.compstruct.2019.02.047__Composite Structures, 2019, pp. 53–57, doi:10.1016/j.compstruct.2019.02.047.

Bader, Fabian, et al. “Intrinsically Lubricated Tool Inserts for Deep Drawing Applications Generated by Selective Laser Melting.”10.1063/1.5112720__PROCEEDINGS OF THE 22ND INTERNATIONAL ESAFORM CONFERENCE ON MATERIAL FORMING: ESAFORM 2019, 2019, doi:10.1063/1.5112720.

Tillmann, Wolfgang, et al. “Al2O3/ZrO2-8O3 and (Cr,Ti)AlSiN Tool Coatings to Influence the Temperature and Surface Quality in Friction-Spinning Processes.”10.1007/s11740-019-00899-y__Production Engineering, 2019, pp. 449–57, doi:10.1007/s11740-019-00899-y.

Djakow, Eugen. Ein Beitrag zur kombinierten (quasi-)statischen und dynamischen Umformung von blechförmigen Halbzeugen. Shaker, 2019, doi:ISBN 978-3-8440-6723-1.

Linnemann, M., et al. “High-Speed Incremental Forming – New Technologies For Flexible Production Of Sheet Metal Parts.”10.1016/j.promfg.2018.12.038__Procedia Manufacturing, 2019, pp. 21–26, doi:10.1016/j.promfg.2018.12.038.

Piper, M., et al. “Heat Transfer Enhancement in Pillow-Plate Heat Exchangers with Dimpled Surfaces: A Numerical Study.”10.1016/j.applthermaleng.2019.02.082__Applied Thermal Engineering, 2019, pp. 142–46, doi:10.1016/j.applthermaleng.2019.02.082.

Djakow, Eugen. Ein Beitrag zur kombinierten (quasi-)statischen und dynamischen Umformung von blechförmigen Halbzeugen. 2019.

Tabakajew, Dmitri. Simulationsgestützte Analyse und Optimierung der Umformung geschlossener Stahlprofile mittels Hamburger Verfahren. 2019.

Schmidt, Hans Christian. Ein Beitrag zum stoffschlüssigen Fügen durch plastische Deformation: partielles Kaltpressschweißen durch inkrementelles Walzen. 2019.

Lossen, Benjamin. Ein Beitrag zur Herstellung von hybriden Bauteilen mittels Reibdrücken. 2019.

Rostek, Tim, and Werner Homberg. “Improved Set up Strategies for Steel Strip Straightening Machines.”10.1063/1.5112734__AIP Conference Proceedings 2113, 170018, vol. 2113, no. 1, AIP Publishing, 2019, doi:10.1063/1.5112734.

Wiens, Eugen, and Werner Homberg. “Forming Analysis of Tailored Tubes with an Internal Contoured Wall Thickness and External Axial Ribs Manufactured by Internal Flow-Turning.”10.1063/1.5112535__PROCEEDINGS OF THE 22ND INTERNATIONAL ESAFORM CONFERENCE ON MATERIAL FORMING: ESAFORM 2019, 2019, doi:10.1063/1.5112535.

Heggemann, Thomas, et al. “Combined Curing and Forming of Fiber Metal Laminates.”10.1016/j.promfg.2020.04.118__Procedia Manufacturing, 2020, pp. 36–42, doi:10.1016/j.promfg.2020.04.118.

Sapli, Hüseyin, et al. Combined Curing and Deep Drawing of Fiber Metal Laminates to Spherical Hybrid Components. 2020.

Rozo Vasquez, Julian, et al. “Microstructural Investigation on Phase Transformation during Flow Forming of the Metastable Austenite AISI 304 .”  54. Metallographie-Tagung, 2020, pp. 75–81.

Rostek, Tim, et al. “Joining with Versatile Friction-Spun Joint Connectors.”10.1016/j.promfg.2020.04.313__Procedia Manufacturing, vol. 47,10.1016/j.promfg.2020.04.313__Elsevier Ltd, 2020, pp. 395–99, doi:10.1016/j.promfg.2020.04.313.

Wiens, Eugen, et al. “Some Ideas for the Further Development of Hydroforming Process Chains.” Nebu/Nehy 2020, 2020.

Heggemann, Thomas, et al. “Experimental and Numerical Investigations into the Influence of the Process Parameters During the Deep Drawing of Fiber Metal Laminates.”10.1007/978-3-030-75381-8_219__Forming the Future, 2021, doi:10.1007/978-3-030-75381-8_219.

Voswinkel, Dietrich, et al. “Improving the Accuracy of Deep Drawn Fiber-Metal Laminate Parts by Preliminary Surface Treatment.”10.1088/1757-899x/1190/1/012028__IOP Conference Series: Materials Science and Engineering, 012028, 2021, doi:10.1088/1757-899x/1190/1/012028.

Bader, Fabian, et al. “Innovative Measurement Of Stress Superposed Steel Strip For Straightening Machines.”10.25518/esaform21.2382__ESAFORM 2021, 2021, doi:10.25518/esaform21.2382.

Bader, Fabian, et al. “Self-Optimized, Intelligent Open-Loop-Controlled Steel Strip Straightening Machine for Advanced Formability.”10.1007/978-3-030-75381-8_1__Forming the Future, 2021, doi:10.1007/978-3-030-75381-8_1.

Wischer, Christian, et al. “Joining with Friction Spun Joint Connectors – Manufacturing and Analysis.”10.1088/1757-899x/1157/1/012007__IOP Conference Series: Materials Science and Engineering, vol. 1157, 2021, p. 012007, doi:10.1088/1757-899x/1157/1/012007.

Wischer, Christian, and Werner Homberg. “A Contribution on Versatile Process Chains: Joining with Adaptive Joining Elements, Formed by Friction Spinning.”10.1007/s11740-021-01094-8__Production Engineering, 2021, doi:10.1007/s11740-021-01094-8.

Borgert, Thomas, and Werner Homberg. “Friction-Induced Recycling Process for User-Specific Semi-Finished Product Production.”10.3390/met11040663__Metals, 663, 2021, doi:10.3390/met11040663.

Rostek, Tim, et al. “Cutting Blades for Food Processing Applications Manufactured Using Innovative Spin Forming.”10.1007/978-3-030-75381-8_178__Proceedings of the 13th International Conference on the Technology of Plasticity, edited by G. Daehn et al., Springer, Cham, 2021, pp. 2115–25, doi:10.1007/978-3-030-75381-8_178.

Dahms, Frederik, and Werner Homberg. “Investigations and Improvements in 3D-DIC Optical Residual Stress Analysis—A New Temperature Compensation Method.”10.1007/978-3-030-75381-8_189__Forming the Future, Springer, Cham, 2021, pp. 2249–59, doi:10.1007/978-3-030-75381-8_189.

Rozo Vasquez, Julian, et al. “Magnetic Barkhausen Noise Analysis for Microstructural Effects Separation during Flow Forming of Metastable Austenite 304L.” Proceedings of the 11th International Work­shop NDT in Progress, 2021.

Arian, Bahman, et al. Forming of Metastable Austenitic Stainless Steel Tubes with Axially Graded Martensite Content by Flow-Forming. ULiège Library, 2021.

Wiens, Eugen, et al. “Forming of Parts with Locally Defined Mechanical and Ferromagnetic Properties by Flow-Forming.”10.1007/978-3-030-75381-8_160__Forming the Future, Springer International Publishing, 2021, doi:10.1007/978-3-030-75381-8_160.

Wischer, Christian, et al. “Joining with Versatile Joining Elements Formed by Friction Spinning.”10.1016/j.jajp.2021.100060__Journal of Advanced Joining Processes, vol. 3, 100060, Elsevier, 2021, doi:10.1016/j.jajp.2021.100060.

Wiens, Eugen, et al., editors. Development of a Novel Adaptive Joining Technology Employing Friction-Spun Joint Connectors (FSJC). 2021, doi:10.25518/esaform21.4682.

Riepold, Markus, et al. “Model Approaches for Closed-Loop Property Control for Flow Forming.”10.1016/j.aime.2021.100057__Advances in Industrial and Manufacturing Engineering, 100057, 2021, doi:10.1016/j.aime.2021.100057.

Vieth, Pascal, et al. “Assessment of Mechanical and Optical Properties of Al 6060 Alloy Particles by Removal of Contaminants.”10.1002/adem.202201081__Advanced Engineering Materials, Wiley, 2022, doi:10.1002/adem.202201081.

Meschut, Gerson, et al. “Review on Mechanical Joining by Plastic Deformation.”10.1016/j.jajp.2022.100113__Journal of Advanced Joining Processes, vol. 5, 100113, Elsevier BV, 2022, doi:10.1016/j.jajp.2022.100113.

Borgert, Thomas, and Werner Homberg. “Energy Saving Potentials of an Efficient Recycling Process of Different Aluminum Rejects.”10.1016/j.egyr.2022.01.027__Energy Reports, vol. 8, Elsevier BV, 2022, pp. 399–404, doi:10.1016/j.egyr.2022.01.027.

Engemann, David, and Werner Homberg. Hot Spinning of Cutting Blades for Food Industry.

Oesterwinter, Annika, et al. “Identification of Requirements for FE Modeling of an Adaptive Joining Technology Employing Friction-Spun Joint Connectors (FSJC).”10.3390/met12050869__Metals, vol. 12, no. 5, 869, MDPI AG, 2022, doi:10.3390/met12050869.

Wischer, Christian, and Werner Homberg. “Further Development of an Adaptive Joining Technique Based on Friction Spinning to Produce Pre-Hole-Free Joints.”10.4028/p-1n6741__Key Engineering Materials, vol. 926, Trans Tech Publications, Ltd., 2022, pp. 1468–78, doi:10.4028/p-1n6741.

Heggemann, Thomas, et al. “Comparative Analysis of Electrohydraulic and Electromagnetic Sheet Metal Forming against the Background of the Application as an Incremental Processing Technology.”10.3390/met12040660__Metals, vol. 12, no. 4, 2022, doi:10.3390/met12040660.

Wiens, Eugen. Innendrückwalzen – Ein innovatives Umformverfahren zur inkrementellen Formgebung von wanddickenkonturierten Rohren mit lokal einstellbaren mechanischen Eigenschaften. 2022.

Dahms, Frederik, and Werner Homberg. “Manufacture of Defined Residual Stress Distributions in the Friction-Spinning Process: Driven Tool and Subsequent Flow-Forming.”10.4028/p-3rk19y__Key Engineering Materials, vol. 926, Trans Tech Publications, Ltd., 2022, pp. 683–89, doi:10.4028/p-3rk19y.

Dahms, Frederik, and Werner Homberg. “Manufacture of Defined Residual Stress Distributions in the Friction-Spinning Process: Investigations and Run-to-Run Predictive Control.”10.3390/met12010158__Metals, vol. 12, no. 1, 158, MDPI AG, 2022, doi:10.3390/met12010158.

Bathelt, Lukas, et al. Innovative Assistance System for Setting up a Mechatronic Straightening Machine. 2022, doi:https://doi.org/10.4028/p-vs07w9.

Bader, Fabian, et al. An Approach for an Innovative 3d Steel Strip Straightening Machine for Curvature and Saber Compensation. 2022, doi:https://doi.org/10.4028/p-87wvu0.

Bathelt, Lukas, et al. “Mechatronische Richtapparate: Intelligente Richttechnik von Hochfesten Flachdrähten.” Fachtagung VDI MECHATRONIK 2022 , 2022, pp. 19–24.

Rozo Vasquez, Julian, et al. “Coupled Microscopic and Micromagnetic Depth-Specific Analysis of Plastic Deformation and Phase Transformation of Metastable Austenitic Steel AISI 304L by Flow Forming.”10.1515/pm-2022-0064__Practical Metallography, vol. 59, no. 11, Walter de Gruyter GmbH, 2022, pp. 660–75, doi:10.1515/pm-2022-0064.

Kersting, Lukas, et al. “Innovative Online Measurement and Modelling Approach for Property-Controlled Flow Forming Processes.”10.4028/p-yp2hj3__Key Engineering Materials, vol. 926, Trans Tech Publications, Ltd., 2022, pp. 862–74, doi:10.4028/p-yp2hj3.

Rozo Vasquez, Julian, et al. “Soft Sensor Concept for Micromagnetic Depth-Specific Analysis of Phase Transformation during Flow Forming of AISI 304L Steel.” Proceedings of the 14th International Conference on Barkhausen Noise and Micromagnetic Testing, 2022.

Kersting, Lukas, et al. Echtzeitfähige Modellierung Eines Innovativen Drückwalzprozesses Für Die Eigenschaftsgeregelte Herstellung Gradierter Bauteile. Diedrich, 2022.

Wiens, Eugen. Innendrückwalzen – Ein Innovatives Umformverfahren Zur Inkrementellen Formgebung von Wanddickenkonturierten Rohren Mit Lokal Einstellbaren Mechanischen Eigenschaften. Shaker, 2022.

Arian, Bahman, et al. “Produktkennzeichnung Durch Lokal Definierte Einstellung von Ferromagnetischen Eigenschaften Beim Drückwalzen von Metastabilen Stahlwerkstoffen.” 36. Aachener Stahlkolloquium – Umformtechnik “Ideen Form Geben“, 2022, pp. 333–47.

Arian, Bahman, et al. “A Flow Forming Process Model to Predict Workpiece Properties in AISI 304L.” 19th Int. Conference on Metal Forming 2022, 2022.

Borgert, Thomas, and Werner Homberg. “Analysis of Temperature Effect on Strength and Microstructure in Friction Induced Recycling Process (FIRP).”10.21741/9781644902479-211__Materials Research Proceedings, Materials Research Forum LLC, 2023, doi:10.21741/9781644902479-211.

Dahms, Frederik, and Werner Homberg. “Energy and Resource-Efficient Forming of Gas Cylinders by Friction-Spinning.”10.21741/9781644902479-208__Materials Research Proceedings, Materials Research Forum LLC, 2023, doi:10.21741/9781644902479-208.

Holzmüller, Maik, et al. “Proof of Concept for Incremental Sheet Metal Forming by Means of Electromagnetic and Electrohydraulic High-Speed Forming.”10.21741/9781644902417-2__Materials Research Proceedings, vol. 25, Materials Research Forum LLC, 2023, pp. 11–18, doi:10.21741/9781644902417-2.

Knyazyev, Mykhaylo, et al. “Investigation of Pressure Fields Generated by Two Simultaneous Discharges in Liquid Initiated by Wires.”10.3390/jmmp7010040__Journal of Manufacturing and Materials Processing, vol. 7, no. 1, 40, MDPI AG, 2023, doi:10.3390/jmmp7010040.

Dahms, Frederik, and Werner Homberg. “Analysis and Modelling of the Deformation in the Manufacture of Flange-Contours by the Combined Friction-Spinning and Flow-Forming Process.”10.1007/978-3-031-41023-9_72__Lecture Notes in Mechanical Engineering, Springer Nature Switzerland, 2023, doi:10.1007/978-3-031-41023-9_72.

Borgert, Thomas, et al. “Investigations on the Influences of the Thermomechanical Manufacturing of Aluminium Auxiliary Joining Elements.”10.3390/jmmp7040147__Journal of Manufacturing and Materials Processing, vol. 7, no. 4, 147, MDPI AG, 2023, doi:10.3390/jmmp7040147.

Borgert, Thomas, and Werner Homberg. “Friction-Induced Recycled Aluminium Semi-Finished Products in Thermo-Mechanical Joining Technology.”10.1007/978-3-031-41341-4_1__Lecture Notes in Mechanical Engineering, Springer Nature Switzerland, 2023, doi:10.1007/978-3-031-41341-4_1.

Afsahnoudeh, Reza, et al. Numerische Untersuchung von Oberflächenstrukturierung Zur Erhöhung Der Effizienz von Kissenplatten-Wärmeübertragern. 2023.

Kersting, Lukas, et al. “Echtzeitfähige Modellierung Eines Innovativen Drückwalzprozesses Für Die Eigenschaftsgeregelte Bauteilfertigung.”10.1515/auto-2022-0106__At - Automatisierungstechnik, vol. 71, no. 1, Walter de Gruyter GmbH, 2023, pp. 68–81, doi:10.1515/auto-2022-0106.

Kersting, Lukas, et al. “Control Strategy for Angular Gradations by Means of the Flow Forming Process.”10.21741/9781644902479-220__Materials Research Proceedings, Materials Research Forum LLC, 2023, doi:10.21741/9781644902479-220.

Rozo Vasquez, Julian, et al. “Detection of Phase Transformation during Plastic Deformation of Metastable Austenitic Steel AISI 304L by Means of X-Ray Diffraction Pattern Analysis.” Metals, 2023.

Borgert, Thomas, et al. “Potentials of a Friction-Induced Recycling Process to Improve Resource and Energy Efficiency in Manufacturing Technology.”10.1007/s12289-023-01785-w__International Journal of Material Forming, vol. 16, no. 6, 59, Springer Science and Business Media LLC, 2023, doi:10.1007/s12289-023-01785-w.

Rozo Vasquez, Julian, et al. Softsensor Model of Phase Transformation during Flow Forming of Metastable Austenitic Steel AISI 304L. 2023.

Bathelt, Lukas, et al. “Novel Straightening-Machine Design with Integrated Force Measurement for Straightening of High-Strength Flat Wire.”10.3390/s23229091__Sensors, vol. 23, no. 22, 2023, doi:10.3390/s23229091.

Borgert, Thomas. Reibungsinduzierter Prozess zum nutzerindividuellen und energieeffizienten Recycling von Aluminiumschrotten. 2023.

Bathelt, Lukas, et al. “Innovative Self-Learning Disturbance Compensation for Straightening Processes.”10.21741/9781644902479-216__Materials Research Proceedings, Materials Research Forum LLC, 2023, doi:10.21741/9781644902479-216.

Bathelt, Lukas, et al. “Neuartiger Ansatz Zum Richten von Zwei- Und Dreidimensionalen Fehlern an Einem Federdraht.” Ilmenauer Federntag 2023: Neueste Erkenntnisse Zu Funktion, Berechnung, Prüfung Und Gestaltung von Federn Und Werkstoffen, ISLE Steuerungstechnik und Leistungselektronik, 2023.

Arian, Bahman, et al. “Cryogenic Reverse Flow Forming of AISI 304L.”10.21741/9781644902479-219__Materials Research Proceedings, Materials Research Forum LLC, 2023, doi:10.21741/9781644902479-219.

Stebner, Sophie Charlotte, et al. “Monitoring the Evolution of Dimensional Accuracy and Product Properties in Property-Controlled Forming Processes.”10.48550/ARXIV.2305.19601__Electrical Engineering: Systems and Control, 2023, doi:10.48550/ARXIV.2305.19601.