Keuck, Lukas, A Munir, Frank Schafmeister, and Joachim Böcker. “Adaptive Frequency Control of DC-DC-Converters for Maximum Efû01ciency Using Artiû01cial Neural Network.” In Proc. IEEE International Exhibition and Conference for Power Electronics, Intelligent Motion, Renewable Energy and Energy Management (PCIM). Nuremberg, Germany: IEEE, 2018.

Keuck, Lukas, Noman Jabbar, Frank Schafmeister, and Joachim Böcker. “Switching Loss Characterization of Wide Band-Gap Devices by an Indirect Identification Methodology.” In Proc. 20th European Conference on Power Electronics and Applications (EPE-ECCE Europe), 1–10. Riga, Latvia: EPE, 2018.

Hagemeyer, Marc, Frank Schafmeister, and Joachim Böcker. “Coupled Inductor Design for Interleaved High-Current DC-DC Converters.” In Proc. International Conference on Electrical Machines and Systems (ICEMS), 2316–21. Jeju, South-Korea: Korea IEE &; IEE Japan, 2018.

Hanke, Sören, Sebastian Peitz, Oliver Wallscheid, Stefan Klus, Joachim Böcker, and Michael Dellnitz. “Koopman Operator-Based Finite-Control-Set Model Predictive Control for Electrical Drives.” ArXiv Preprint ArXiv:1804.00854, 2018.

Hagemeyer, Marc, Norbert Fröhleke, Joachim Böcker, Bernd Rödder, Lars Aßmann, and Bernd Völkel. “Design of a Flywheel Energy Storage System for High Current Pulsating Loads.”https://doi.org/10.1109/peds.2017.8289157__In 2017 IEEE 12th International Conference on Power Electronics and Drive Systems (PEDS). IEEE, 2018.https://doi.org/10.1109/peds.2017.8289157 .

Vogt, Thorsten, Julia Badeda, Joachim Böcker, and Dirk Uwe Sauer. “Consideration on Primary Control Reserve Provision by Industrial Microgrids in Grid-Coupled Operation.”https://doi.org/10.1109/peds.2017.8289189__In 2017 IEEE 12th International Conference on Power Electronics and Drive Systems (PEDS). IEEE, 2018.https://doi.org/10.1109/peds.2017.8289189 .

Weber, Daniel, Mohammad Iffat Rafsan Jani, Matti Grabo, Oliver Wallscheid, Tobias Klaus, Stefan Krauter, and Joachim Böcker. “Lifetime Extension of Photovoltaic Modules by Influencing the Module Temperature Using Phase Change Material.”https://doi.org/ 10.1109/PVSC.2018.8548115__In World Conference on Photovoltaic Energy Conversion (WCPEC-7), 45th IEEE PVSC, 28th PVSEC, 34th EU PVSEC. Waikoloa Village, Big Island, Hawaii (USA), 2018.https://doi.org/ 10.1109/PVSC.2018.8548115 .

Peter, Klaus, Fabian Mink, and Joachim Böcker. “Model-Based Control Structure for High-Speed Permanent Magnet Synchronous Drives.”https://doi.org/10.1109/iemdc.2017.8002284__In 2017 IEEE International Electric Machines and Drives Conference (IEMDC). IEEE, 2017.https://doi.org/10.1109/iemdc.2017.8002284 .

Wallscheid, Oliver, Wilhelm Kirchgässner, and Joachim Böcker. “Investigation of Long Short-Term Memory Networks to Temperature Prediction for Permanent Magnet Synchronous Motors.”https://doi.org/10.1109/ijcnn.2017.7966088__In 2017 International Joint Conference on Neural Networks (IJCNN), 2017.https://doi.org/10.1109/ijcnn.2017.7966088 .

Bolte, Sven, Carsten Henkenius, Joachim Böcker, Eugeny Kenig, Alexander Zibart, and Heiko Figge. “Wassergekühltes On-Board-Ladegerät Mit Optimiertem Kühlkanal.” Wt Werkstattstechnik Online 107, no. 5 (2017): 381ff.

Bolte, Sven, Carsten Henkenius, Joachim Böcker, Alexander Zibart, Eugeny Kenig, and Heiko Figge. “Water-Cooled on-Board Charger with Optimized Cooling Channel.”https://doi.org/10.23919/epe17ecceeurope.2017.8099019__In 2017 19th European Conference on Power Electronics and Applications (EPE’17 ECCE Europe). IEEE, 2017.https://doi.org/10.23919/epe17ecceeurope.2017.8099019 .

Bolte, Sven, Lukas Keuck, Jehan Khan Afridi, Norbert Fröhleke, and Joachim Böcker. “Calorimetric Measurements with Compensating Temperature Control.”https://doi.org/10.1109/isie.2017.8001320__In 2017 IEEE 26th International Symposium on Industrial Electronics (ISIE). IEEE, 2017.https://doi.org/10.1109/isie.2017.8001320 .

Ott, Markus, Aybike Gülec, and Joachim Böcker. “An Iterative Compensation Method for Production Tolerances in Electric Drive Systems.”https://doi.org/10.1109/iemdc.2017.8002052__In 2017 IEEE International Electric Machines and Drives Conference (IEMDC). IEEE, 2017.https://doi.org/10.1109/iemdc.2017.8002052 .

Bolte, Sven, Jehan Khan Afridi, and Joachim Böcker. “Winding Concepts for High Frequency Inductors with Reduced DC Resistance.”https://doi.org/10.1109/intlec.2017.8214182__In 2017 IEEE International Telecommunications Energy Conference (INTELEC). IEEE, 2017.https://doi.org/10.1109/intlec.2017.8214182 .

Bolte, Sven, Lukas Wohlrab, Jehan Khan Afridi, Norbert Fröhleke, and Joachim Böcker. “Calorimetric Measurement of Wide Bandgap Semiconductors Switching Losses.” In PCIM Europe 2017; International Exhibition and Conference for Power Electronics, Intelligent Motion, Renewable Energy and Energy Management, 1–6, 2017.

Gaona, Daniel, Oliver Wallscheid, and Joachim Böcker. “Glocal Identification Methods for Low-Order Lumped Parameter Thermal Networks Used in Permanent Magnet Synchronous Motors.” In 2017 IEEE 12th International Conference on Power Electronics and Drive Systems (PEDS), 1–126, 2017.

Gaona, Daniel, Oliver Wallscheid, and Joachim Böcker. “Sensitivity Analysis of a Permanent Magnet Temperature Observer for PM Synchronous Machines Using the Monte Carlo Method.” In 2017 IEEE 12th International Conference on Power Electronics and Drive Systems (PEDS), 599–606, 2017.

Hanke, Sören, Oliver Wallscheid, and Joachim Böcker. “A Direct Model Predictive Torque Control Approach to Meet Torque and Loss Objectives Simultaneously in Permanent Magnet Synchronous Motor Applications.” In 2017 IEEE International Symposium on Predictive Control of Electrical Drives and Power Electronics (PRECEDE), 101–106, 2017.

Wallscheid, Oliver, Andreas Specht, and Joachim Böcker. “Observing the Permanent Magnet Temperature of Synchronous Motors Based on Electrical Fundamental Wave Model Quantities.” IEEE Transactions on Industrial Electronics 64, no. 5 (2017): 3921–3929.

Gaona, Daniel, Oliver Wallscheid, and Joachim Böcker. “Fusion of a Lumped-Parameter Thermal Network and Speed-Dependent Flux Observer for PM Temperature Estimation in Synchronous Machines.” In 2017 IEEE Southern Power Electronics Conference (SPEC), 1–6, 2017.

Wallscheid, Oliver, and Joachim Böcker. “Fusion of Direct and Indirect Temperature Estimation Techniques for Permanent Magnet Synchronous Motors.” In 2017 IEEE International Electric Machines and Drives Conference (IEMDC), 1–8, 2017.

Wallscheid, Oliver, and Joachim Böcker. “Derating of Automotive Drive Systems Using Model Predictive Control.” In 2017 IEEE International Symposium on Predictive Control of Electrical Drives and Power Electronics (PRECEDE), 31–36, 2017.

Ott, Markus, Alexander Beckmann, and Joachim Böcker. “A Compensation Method for Production Tolerances in Electric Drive Systems Using an Extended Open-Loop Torque Control.” In European Battery, Hybrid and Fuel Cell Electric Vehicle Congress Geneva, 14th-16th March 2017, 2017.

Vogt, Thorsten, Daniel Weber, Oliver Wallscheid, and Joachim Böcker. “Prediction of Residual Power Peaks in Industrial Microgrids Using Artificial Neural Networks.” In International Joint Conference on Neural Networks (IJCNN), 3228–3235, 2017.

Hagemeyer, Marc, Norbert Fröhleke, Dora V. M. M. Krishna, and Joachim Böcker. “Development of a Flywheel Energy Storage-Based Welding System.”https://doi.org/10.1109/spec.2016.7846049__In 2016 IEEE 2nd Annual Southern Power Electronics Conference (SPEC). IEEE, 2017.https://doi.org/10.1109/spec.2016.7846049 .

Böcker, Joachim. “Some Reflections on Electromagnetic Force in Matter.”https://doi.org/10.1109/speedam.2016.7525880__In 2016 International Symposium on Power Electronics, Electrical Drives, Automation and Motion (SPEEDAM). IEEE, 2016.https://doi.org/10.1109/speedam.2016.7525880 .

Stille, Karl Stephan Christian, and Joachim Böcker. “Local Demand Response and Load Planning System for Intelligent Domestic Appliances.”https://doi.org/10.1109/icrera.2015.7418638__In 2015 International Conference on Renewable Energy Research and Applications (ICRERA). IEEE, 2016.https://doi.org/10.1109/icrera.2015.7418638 .

Stille, Karl Stephan Christian, Joachim Böcker, Norbert Fröhleke, Ralf Bettentrup, and Ingo Kaiser. “Integration of Home Photovoltaic Generation into Electricity Tariff for Load Optimization.”https://doi.org/10.1109/sgcf.2016.7492441__In 2016 4th International Istanbul Smart Grid Congress and Fair (ICSG). IEEE, 2016.https://doi.org/10.1109/sgcf.2016.7492441 .

Stille, Karl Stephan Christian, Joachim Böcker, Norbert Fröhleke, Ralf Bettentrup, and Ingo Kaiser. “Local Grid Load Coordination for Load-Shiftable Domestic Appliances in a Variable-Tariff Environment.”https://doi.org/10.1109/epe.2016.7695583__In 2016 18th European Conference on Power Electronics and Applications (EPE’16 ECCE Europe). IEEE, 2016.https://doi.org/10.1109/epe.2016.7695583 .

Stille, Karl Stephan Christian, Joachim Böcker, Norbert Fröhleke, Ralf Bettentrup, and Ingo Kaiser. “Supervisional Load Optimization for Households with Intelligent Domestic Appliances.”https://doi.org/10.1109/cpe.2016.7544176__In 2016 10th International Conference on Compatibility, Power Electronics and Power Engineering (CPE-POWERENG). IEEE, 2016.https://doi.org/10.1109/cpe.2016.7544176 .

Wallscheid, Oliver, Tobias Huber, Wilhelm Peters, and Joachim Böcker. “A Critical Review of Techniques to Determine the Magnet Temperature of Permanent Magnet Synchronous Motors under Real-Time Conditions.” EPE Journal, no. 25 (2016): 1–10.

Wallscheid, Oliver, Ulrich Ammann, and Joachim Böcker. “Real-Time Capable Model Predictive Control of Permanent Magnet Synchronous Motors Using Particle Swarm Optimisation.” In PCIM Europe 2016; International Exhibition and Conference for Power Electronics, Intelligent Motion, Renewable Energy and Energy Management, 1–8, 2016.

Paradkar, Milind, and Joachim Böcker. “D Analytical Model for Estimation of Eddy Current Loss in the Magnets of IPM Machines Considering the Reaction Field of the Induced Eddy Currents.”https://doi.org/10.1109/iemdc.2015.7409198__In 2015 IEEE International Electric Machines &; Drives Conference (IEMDC). IEEE, 2016.https://doi.org/10.1109/iemdc.2015.7409198 .

Huber, Tobias, Wilhelm Peters, and Joachim Böcker. “Voltage Controller for Flux Weakening Operation of Interior Permanent Magnet Synchronous Motor in Automotive Traction Applications.”https://doi.org/10.1109/iemdc.2015.7409195__In 2015 IEEE International Electric Machines &; Drives Conference (IEMDC). IEEE, 2016.https://doi.org/10.1109/iemdc.2015.7409195 .

Paradkar, M., and Joachim Böcker. “Analysis of Eddy Current Losses in the Stator Windings of IPM Machines in Electric and Hybrid Electric Vehicle Applications.”https://doi.org/10.1049/cp.2016.0320__In 8th IET International Conference on Power Electronics, Machines and Drives (PEMD 2016). Institution of Engineering and Technology, 2016.https://doi.org/10.1049/cp.2016.0320 .

Peter, K., Joachim Böcker, F. Mink, and S. Beineke. “Comparison of Quarter-Wave with Half-Wave Symmetrical Pulse Patterns Applied in Electrical High-Speed Drives.”https://doi.org/10.1049/cp.2016.0358__In 8th IET International Conference on Power Electronics, Machines and Drives (PEMD 2016). Institution of Engineering and Technology, 2016.https://doi.org/10.1049/cp.2016.0358 .

Schulte, C., K. Peter, Joachim Böcker, and M. Leuer. “Comparison of Optimized Pulse Patterns with Direct Model Predictive Control Using Co-Simulation.”https://doi.org/10.1049/cp.2016.0331__In 8th IET International Conference on Power Electronics, Machines and Drives (PEMD 2016). Institution of Engineering and Technology, 2016.https://doi.org/10.1049/cp.2016.0331 .

Peter, Klaus, Soren Hanke, Fabian Mink, and Joachim Böcker. “Inverter Loss Management for an Electrical High-Speed Drive System.”https://doi.org/10.1109/epe.2016.7695587__In 2016 18th European Conference on Power Electronics and Applications (EPE’16 ECCE Europe). IEEE, 2016.https://doi.org/10.1109/epe.2016.7695587 .

Ott, Markus, and Joachim Böcker. “Sensitivity Analysis on Production Tolerances for Electric Drive Systems in Automotive Application.”https://doi.org/10.1109/epe.2016.7695392__In 2016 18th European Conference on Power Electronics and Applications (EPE’16 ECCE Europe). IEEE, 2016.https://doi.org/10.1109/epe.2016.7695392 .

Leuer, Michael, Michael Lönneker, and Joachim Böcker. “Model Predictive Control Strategy for Multi-Phase Thyristor Matrix Converters — Advantages, Problems and Solutions.”https://doi.org/10.1109/epe.2016.7695350__In 2016 18th European Conference on Power Electronics and Applications (EPE’16 ECCE Europe). IEEE, 2016.https://doi.org/10.1109/epe.2016.7695350 .

Bolte, Sven, Norbert Fröhleke, and Joachim Böcker. “Comparison of the Performance of Gallium Nitride (GaN) Transistors in a Totem-Pole Power Factor Controlled (PFC) Rectifier.”https://doi.org/10.1109/intlec.2016.7749113__In 2016 IEEE International Telecommunications Energy Conference (INTELEC). IEEE, 2016.https://doi.org/10.1109/intlec.2016.7749113 .

Vogt, Thorsten, Richard Pahl, Norbert Fröhleke, and Joachim Böcker. “Determination of Storage Loss Characteristics with Reasonable Measurement and Calculation Effort.”https://doi.org/10.1109/epe.2016.7695689__In 2016 18th European Conference on Power Electronics and Applications (EPE’16 ECCE Europe). IEEE, 2016.https://doi.org/10.1109/epe.2016.7695689 .

Leuer, Michael, Michael Lönneker, and Joachim Böcker. “Direct Model Predictive Control Strategy for Multi-Phase Thyristor Matrix Converters.”https://doi.org/10.1109/precede.2015.7395589__In 2015 IEEE International Symposium on Predictive Control of Electrical Drives and Power Electronics (PRECEDE). IEEE, 2016.https://doi.org/10.1109/precede.2015.7395589 .

Bolte, Sven, Norbert Fröhleke, and Joachim Böcker. “DC-DC Converter Design for Power Distribution Systems in Electric Vehicles Using Calorimetric Loss Measurements.”https://doi.org/10.1109/epe.2016.7695644__In 2016 18th European Conference on Power Electronics and Applications (EPE’16 ECCE Europe). IEEE, 2016.https://doi.org/10.1109/epe.2016.7695644 .

Henkenius, Carsten, Norbert Fröhleke, Joachim Böcker, and Heiko Figge. “Numerical Optimization of Passive Line Filter Components for Suppression of Electromagnetic Interference (EMI).”https://doi.org/10.1109/apec.2016.7468073__In 2016 IEEE Applied Power Electronics Conference and Exposition (APEC). IEEE, 2016.https://doi.org/10.1109/apec.2016.7468073 .

Bolte, Sven, Norbert Fröhleke, and Joachim Böcker. “Efficiency Optimization for a Power Factor Correction (PFC) Rectifier with Gallium Nitride Transistor.”https://doi.org/10.1109/wipda.2015.7369288__In 2015 IEEE 3rd Workshop on Wide Bandgap Power Devices and Applications (WiPDA). IEEE, 2016.https://doi.org/10.1109/wipda.2015.7369288 .

Henkenius, Carsten, Norbert Fröhleke, and Joachim Böcker. “Analysis and Design of Integrated Common and Differential Mode Inductors.”https://doi.org/10.1109/intlec.2016.7749121__In 2016 IEEE International Telecommunications Energy Conference (INTELEC). IEEE, 2016.https://doi.org/10.1109/intlec.2016.7749121 .

Stille, Karl Stephan Christian, Joachim Böcker, Ralf Bettentrup, and Ingo Kaiser. “Concept for a Hierarchical Load Control for Domestic Appliances in Smart Grids.”https://doi.org/10.1109/icage.2014.7050153__In 2014 International Conference on Advances in Green Energy (ICAGE). IEEE, 2015.https://doi.org/10.1109/icage.2014.7050153 .

Stille, Karl Stephan Christian, Joachim Böcker, Ralf Bettentrup, and Ingo Kaiser. “Hierarchisches Optimierungskonzept Für Die Laststeuerung von Haushaltsgeräten.” In ETG-Fachtagung “Von Smart Grids Zu Smart Markets.” Kassel: VDE, 2015.

Wallscheid, Oliver, and Joachim Böcker. “Global Identification of a Low-Order Lumped-Parameter Thermal Network for Permanent Magnet Synchronous Motors.” IEEE Transactions on Energy Conversion 31, no. 1 (2015): 354–365.

Wallscheid, Oliver, Michael Meyer, and Joachim Böcker. “An Open-Loop Operation Strategy for Induction Motors Considering Iron Losses and Saturation Effects in Automotive Applications.” In 2015 IEEE 11th International Conference on Power Electronics and Drive Systems, 981–985, 2015.

Wallscheid, Oliver, and Joachim Böcker. “Design and Identification of a Lumped-Parameter Thermal Network for Permanent Magnet Synchronous Motors Based on Heat Transfer Theory and Particle Swarm Optimisation.” In European Conference on Power Electronics and Applications (EPE), 2015.

Wallscheid, Oliver, and Joachim Böcker. “Design and Empirical Identification of a Lumped Parameter Thermal Network for Permanent Magnet Synchronous Motors with Physically Motivated Constraints.” In IEEE International Electric Machines and Drives Conference (IEMDC), 2015.

Schulte, Christoph, and Joachim Böcker. “Co-Simulation of an Interior Permanent Magnet Synchronous Motor with Segmented Rotor Structure.”https://doi.org/10.1109/iecon.2014.7048537__In IECON 2014 - 40th Annual Conference of the IEEE Industrial Electronics Society. IEEE, 2015.https://doi.org/10.1109/iecon.2014.7048537 .

Leuer, Michael, and Joachim Böcker. “Switching Strategy for Direct Model Predictive Control in Power Converter and Drive Applications with High Switching Frequency.”https://doi.org/10.1109/icara.2015.7081210__In 2015 6th International Conference on Automation, Robotics and Applications (ICARA). IEEE, 2015.https://doi.org/10.1109/icara.2015.7081210 .

Peter, Klaus, and Joachim Böcker. “Operating Electrical High Speed Drives with Pulse Patterns of Specific Harmonic Content.”https://doi.org/10.1109/ecce.2015.7310076__In 2015 IEEE Energy Conversion Congress and Exposition (ECCE). IEEE, 2015.https://doi.org/10.1109/ecce.2015.7310076 .

Leuer, Michael, and Joachim Böcker. “Self-Optimizing Model Predictive Direct Torque Control for Electrical Drives.”https://doi.org/10.1109/isie.2015.7281616__In 2015 IEEE 24th International Symposium on Industrial Electronics (ISIE). IEEE, 2015.https://doi.org/10.1109/isie.2015.7281616 .

Paradkar, Milind, and Joachim Böcker. “D Analytical Model for Estimation of Eddy Currentlosses in the Magnets of IPM Machine Considering the Reaction Field of the Induced Eddy Currents.”https://doi.org/10.1109/ecce.2015.7310061__In 2015 IEEE Energy Conversion Congress and Exposition (ECCE). IEEE, 2015.https://doi.org/10.1109/ecce.2015.7310061 .

Solanki, Jitendra, Norbert Fröhleke, Joachim Böcker, Gregor Duppe, Andreas Averberg, and Peter Wallmeier. “Voltage-Sequence-Control-Based High-Current Rectifier System.”https://doi.org/10.1109/tia.2015.2422772__IEEE Transactions on Industry Applications 51, no. 5 (2015): 3995–4005.https://doi.org/10.1109/tia.2015.2422772 .

Bolte, Sven, Alexander Speerschneider, Norbert Fröhleke, and Joachim Böcker. “A Comparison of On-Board Chargers for Electric Vehicles with Variable DC-Link Voltage.”https://doi.org/10.1109/sege.2015.7324598__In 2015 IEEE International Conference on Smart Energy Grid Engineering (SEGE). IEEE, 2015.https://doi.org/10.1109/sege.2015.7324598 .

Henkenius, Carsten, Norbert Fröhleke, Joachim Böcker, Heiko Figge, and Tobias Grote. “DCM Detection for On-Line Adaption of Control Parameters for Totem-Pole PFC Rectifier.”https://doi.org/10.1109/icit.2015.7125400__In 2015 IEEE International Conference on Industrial Technology (ICIT). IEEE, 2015.https://doi.org/10.1109/icit.2015.7125400 .

Keuck, Lukas, N. Fröhleke, Joachim Böcker, and A. Ziessler. “PFC-Control for Improved Inductor Utilization.”https://doi.org/10.1109/epe.2015.7309373__In 2015 17th European Conference on Power Electronics and Applications (EPE’15 ECCE-Europe). IEEE, 2015.https://doi.org/10.1109/epe.2015.7309373 .

Vogt, T., L. Keuck, N. Fröhleke, Joachim Böcker, and S. Kempen. “Analysis of Industrial Microgrid Power Curves Based on the Theory of Stochastic Variables for Control System Development and Component Sizing.”https://doi.org/10.1109/icage.2014.7050145__In 2014 International Conference on Advances in Green Energy (ICAGE). IEEE, 2015.https://doi.org/10.1109/icage.2014.7050145 .

Hagemeyer, Marc, Jitendra Solanki, Norbert Fröhleke, Joachim Böcker, Andreas Averberg, and Peter Wallmeier. “Comparison of PWM AC Chopper Topologies.”https://doi.org/10.1109/iecon.2014.7048673__In IECON 2014 - 40th Annual Conference of the IEEE Industrial Electronics Society. IEEE, 2015.https://doi.org/10.1109/iecon.2014.7048673 .

Leuer, Michael, and Joachim Böcker. “Voltage Utilization in Model Predictive Control for IPMSM.”https://doi.org/10.1109/pedes.2014.7042062__In 2014 IEEE International Conference on Power Electronics, Drives and Energy Systems (PEDES). IEEE, 2015.https://doi.org/10.1109/pedes.2014.7042062 .

Keuck, Lukas, F. Hemmelgarn, N. Fröhleke, Joachim Böcker, M. Vohrmann, T. Jungeblut, and U. Rückert. “Neuro Control of a PFC Rectifier for Harmonic Reduction at Partial Loads.”https://doi.org/10.1109/icage.2014.7050149__In 2014 International Conference on Advances in Green Energy (ICAGE). IEEE, 2015.https://doi.org/10.1109/icage.2014.7050149 .

Vogt, Thorsten, Norbert Fröhleke, Joachim Böcker, and Stefan Kempen. “Multi-Objective Storage Operating Strategy for Industrial Microgrids.” In German-Korean Symposium on Power Electronics, 2015.

Vogt, T. , N. Fröhleke, Joachim Böcker, and S. Kempen. “Mehrziel-Speicherbetriebsstrategie Für Industrielle Microgrids,” 2015.

Solanki, J., N. Fröhleke, and Joachim Böcker. “Implementation of Hybrid Filter for 12-Pulse Thyristor Rectifier Supplying High-Current Variable-Voltage DC Load,”https://doi.org/10.1109/TIE.2015.2393833__2015.https://doi.org/10.1109/TIE.2015.2393833 .

Peters, Wilhelm, Oliver Wallscheid, and Joachim Böcker. “Optimum Efficiency Control of Interior Permanent Magnet Synchronous Motors in Drive Trains of Electric and Hybrid Vehicles.”https://doi.org/10.1109/EPE.2015.7311680__In European Conference on Power Electronics and Applications (EPE), 2015.https://doi.org/10.1109/EPE.2015.7311680 .

Wallscheid, Oliver, Tobias Huber, Wilhelm Peters, and Joachim Böcker. “Real-Time Capable Methods to Determine the Magnet Temperature of Permanent Magnet Synchronous Motors—A Review.” In IECON 2014-40th Annual Conference of the IEEE Industrial Electronics Society, 811–818, 2014.

Specht, Andreas, Oliver Wallscheid, and Joachim Böcker. “Determination of Rotor Temperature for an Interior Permanent Magnet Synchronous Machine Using a Precise Flux Observer.” In 2014 International Power Electronics Conference (IPEC-Hiroshima 2014-ECCE ASIA), 1501–1507, 2014.

Peters, Wilhelm, and Joachim Böcker. “Discrete-Time Design of Adaptive Current Controller for Interior Permanent Magnet Synchronous Motors (IPMSM) with High Magnetic Saturation.”https://doi.org/10.1109/iecon.2013.6700225__In IECON 2013 - 39th Annual Conference of the IEEE Industrial Electronics Society. IEEE, 2014.https://doi.org/10.1109/iecon.2013.6700225 .

Buchholz, Oleg, and Joachim Böcker. “FPGA-Based Dynamically Reconfigurable Control of Induction Motor Drives.”https://doi.org/10.1109/iecon.2013.6699698__In IECON 2013 - 39th Annual Conference of the IEEE Industrial Electronics Society. IEEE, 2014.https://doi.org/10.1109/iecon.2013.6699698 .

Huber, Tobias, Wilhelm Peters, and Joachim Böcker. “Monitoring Critical Temperatures in Permanent Magnet Synchronous Motors Using Low-Order Thermal Models.”https://doi.org/10.1109/ipec.2014.6869785__In 2014 International Power Electronics Conference (IPEC-Hiroshima 2014 - ECCE ASIA). IEEE, 2014.https://doi.org/10.1109/ipec.2014.6869785 .

Leuer, Michael, and Joachim Böcker. “Real-Time Implementation of an Online Model Predictive Control for IPMSM Using Parallel Computing on FPGA.”https://doi.org/10.1109/ipec.2014.6869605__In 2014 International Power Electronics Conference (IPEC-Hiroshima 2014 - ECCE ASIA). IEEE, 2014.https://doi.org/10.1109/ipec.2014.6869605 .

Leuer, Michael, Arne Ruting, and Joachim Böcker. “Efficiency-Optimized Model Predictive Torque Control for IPMSM.”https://doi.org/10.1109/energycon.2014.6850398__In 2014 IEEE International Energy Conference (ENERGYCON). IEEE, 2014.https://doi.org/10.1109/energycon.2014.6850398 .

Buchholz, Oleg, and Joachim Böcker. “FPGA-Based Dynamically Reconfigurable Control of Induction Motor Drives.”https://doi.org/10.1109/iecon.2013.6699698__In IECON 2013 - 39th Annual Conference of the IEEE Industrial Electronics Society. IEEE, 2014.https://doi.org/10.1109/iecon.2013.6699698 .

Vogt, T., A. Peters, N. Fröhleke, Joachim Böcker, and S. Kempen. “Power Profile Based Selection and Operation Optimization of Parallel-Connected Power Converter Combinations.”https://doi.org/10.1109/ipec.2014.6870091__In 2014 International Power Electronics Conference (IPEC-Hiroshima 2014 - ECCE ASIA). IEEE, 2014.https://doi.org/10.1109/ipec.2014.6870091 .

Solanki, Jitendra, Norbert Fröhleke, Joachim Böcker, Gregor Duppe, Andreas Averberg, and Peter Wallmeier. “Voltage Sequence Control Based High-Current Rectifier System.”https://doi.org/10.1109/ecce.2014.6953958__In 2014 IEEE Energy Conversion Congress and Exposition (ECCE). IEEE, 2014.https://doi.org/10.1109/ecce.2014.6953958 .

Solanki, Jitendra, Norbert Fröhleke, and Joachim Böcker. “A Completely Modular Power Converter for High-Power High-Current DC Applications.”https://doi.org/10.1109/iecon.2013.6699127__In IECON 2013 - 39th Annual Conference of the IEEE Industrial Electronics Society. IEEE, 2014.https://doi.org/10.1109/iecon.2013.6699127 .

Vogt, T., Joachim Böcker, and S. Kempen. “Die Rolle von Batteriespeichern in KMU-Microgrids.” BWK – Das Energie-Fachmagazin – Springer VDI Verlag, Ausgabe 12-2014, 2014.

Vogt, T., N. Fröhleke, Joachim Böcker, and S. Kempen. “Design Considerations on Peak Power Clipping Thresholds in Microgrids.” In 6th World Conference on Photovoltaic Energy Conversion (WCPEC), 2014.

Gausemeier, Jürgen, Peter Iwanek, Rafal Dorociak, Karl Stephan Christian Stille, and Joachim Böcker. “Konzipierung Eines Selbstoptimierenden Hybriden Energiespeichersystems Unter Besonderer Berücksichtigung Der Verlässlichkeit.” In Wissenschaftsforum Intelligente Technische Systeme, 9. Paderborner Workshop Entwurf Mechatronischer Systeme. Paderborn, Deutschland, 2013.

Böcker, Joachim, Oleg Buchholz, Christoph Romaus, Christoph Schulte, and Karl Stephan Christian Stille. “Selbstoptimierung in Der Anwendung.” In Wissenschaftsforum Intelligente Technische Systeme, 9. Paderborner Workshop Entwurf Mechatronischer Systeme. Paderborn, Deutschland, 2013.

Stille, Karl Stephan Christian, and Joachim Böcker. “Crosslinked Test Benches.” In Design Methodology for Intelligent Technical Systems, edited by Jürgen Gausemeier, Franz Josef Rammig, and Wilhelm Schäfer, 46–49. Lecture Notes in Mechanical Engineering. Springer, 2013.

Stille, Karl Stephan Christian, Christoph Romaus, and Joachim Böcker. “Online Capable Optimized Planning of Power Split in a Hybrid Energy Storage System.”https://doi.org/10.1109/eurocon.2013.6625127__In Eurocon 2013. IEEE, 2013.https://doi.org/10.1109/eurocon.2013.6625127 .

Romaus, Christoph, Dominik Wimmelbücker, Karl Stephan Christian Stille, and Joachim Böcker. “Self-Optimization Energy Management Considering Stochastic Influences for a Hybrid Energy Storage of an Electric Road Vehicle.”https://doi.org/10.1109/iemdc.2013.6556194__In 2013 International Electric Machines &; Drives Conference. IEEE, 2013.https://doi.org/10.1109/iemdc.2013.6556194 .

Wallscheid, Oliver, and Joachim Böcker. “Wirkungsgradoptimale Arbeitspunktsteuerung Für Einen Permanenterregten Synchronmotor Mit Vergrabenen Magneten Unter Berücksichtigung von Temperatureinflüssen.” In ETG-Fachbericht-Internationaler ETG-Kongress 2013–Energieversorgung Auf Dem Weg Nach 2050, 2013.

Specht, Andreas, Sina Ober-Blöbaum, Oliver Wallscheid, Christoph Romaus, and Joachim Böcker. “Discrete-Time Model of an IPMSM Based on Variational Integrators.” In Electric Machines &; Drives Conference (IEMDC), 2013 IEEE International, 1411–1417, 2013.

Figge, Heiko, Tobias Grote, Norbert Fröhleke, Joachim Böcker, and Frank Schafmeister. “Two-Phase Interleaving Configuration of the LLC Resonant Converter - Analysis and Experimental Evaluation.” In Proc. IEEE Annual Industrial Electronics Society Conference (IECON), 1392–97. Vienna, Austria: IEEE, 2013.

Stille, Karl Stephan Christian, Christoph Romaus, and Joachim Böcker. “Hybrid Energy Storage System (HES).” In Design Methodology for Intelligent Technical Systems, edited by Jürgen Gausemeier, Franz Josef Rammig, and Wilhelm Schäfer, 42–46. Lecture Notes in Mechanical Engineering. Springer, 2013.

Paradkar, Milind, and Joachim Böcker. “Design of a High Performance Ferrite Magnet-Assisted Synchronous Reluctance Motor for an Electric Vehicle.”https://doi.org/10.1109/iecon.2012.6389234__In IECON 2012 - 38th Annual Conference on IEEE Industrial Electronics Society. IEEE, 2013.https://doi.org/10.1109/iecon.2012.6389234 .

Leuer, Michael, and Joachim Böcker. “Fast Online Model Predictive Control of IPMSM Using Parallel Computing on FPGA.”https://doi.org/10.1109/iemdc.2013.6556221__In 2013 International Electric Machines &; Drives Conference. IEEE, 2013.https://doi.org/10.1109/iemdc.2013.6556221 .

Schulte, Christoph, and Joachim Böcker. “Co-Simulation of an Electric Traction Drive.”https://doi.org/10.1109/iemdc.2013.6556215__In 2013 International Electric Machines &; Drives Conference. IEEE, 2013.https://doi.org/10.1109/iemdc.2013.6556215 .

Tong, Laisheng, Huanqing Zou, Meng Sun, and Joachim Böcker. “Low Latency Hybrid Hardware-in-the-Loop Simulator for Railway Traction System.”https://doi.org/10.1109/vppc.2013.6671735__In 2013 IEEE Vehicle Power and Propulsion Conference (VPPC). IEEE, 2013.https://doi.org/10.1109/vppc.2013.6671735 .

Krishna, D.V.M.M., H. Preckwinkel, N. Fröhleke, and Joachim Böcker. “A Novel LC Resonant Based Partial Booster Scheme for Improved Efficiency and Reduced Cost of Transformerless Photovoltaic Inverters.” In PCIM Europe Conference, Nürnberg, Germany, 2013.

Bolte, S., J. Baurichter, C. Henkenius, N. Fröhleke, Joachim Böcker, and H. Figge. “Verlustmodellierung Und Effizienzoptimierung Einer Hart Schaltenden, Netzfreundlichen Pulsgleichrichterstufe (PFC).” In Internationaler ETG Kongress, Berlin, Germany, 2013.

Peter, K., and Joachim Böcker. “Minimierung Niederfrequenter Oberschwingungen in Pulsmustern Für 2-Level Umrichter in Antriebssystemen Mittels Winkelmodulierter Partikel Schwarm Optimierung.” In Internationaler ETG Kongress, Berlin, Germany, 2013.

Keuck, Lukas, N. Fröhleke, and Joachim Böcker. “Formaler Regelungsentwurf Für Netzfreundliche PFC-Ladegleichrichter Unter Anwendung Eines Netzbeobachters.” In Internationaler ETG Kongress, Berlin, Germany, 2013.