L. Keuck, A. Munir, F. Schafmeister, and J. Böcker, “Adaptive Frequency Control of DC-DC-Converters for Maximum Efû01ciency Using Artiû01cial Neural Network,” presented at the  IEEE International Exhibition and Conference for Power Electronics, Intelligent Motion, Renewable Energy and Energy Management (PCIM 18), Nuremberg, Germany, 2018.

L. Keuck, N. Jabbar, F. Schafmeister, and J. Böcker, “Switching Loss Characterization of Wide Band-Gap Devices by an Indirect Identification Methodology,” in Proc. 20th European Conference on Power Electronics and Applications (EPE-ECCE Europe), Riga, Latvia, 2018, pp. 1–10.

M. Hagemeyer, F. Schafmeister, and J. Böcker, “Coupled Inductor Design for Interleaved High-Current DC-DC Converters,” in Proc. International Conference on Electrical Machines and Systems (ICEMS), Jeju, South-Korea, 2018, pp. 2316–2321.

S. Hanke, S. Peitz, O. Wallscheid, S. Klus, J. Böcker, and M. Dellnitz, “Koopman Operator-Based Finite-Control-Set Model Predictive Control for Electrical Drives,” arXiv preprint arXiv:1804.00854, 2018.

M. Hagemeyer, N. Fröhleke, J. Böcker, B. Rödder, L. Aßmann, and B. Völkel, “Design of a flywheel energy storage system for high current pulsating loads,”10.1109/peds.2017.8289157__2018, doi:10.1109/peds.2017.8289157 .

T. Vogt, J. Badeda, J. Böcker, and D. U. Sauer, “Consideration on primary control reserve provision by industrial microgrids in grid-coupled operation,”10.1109/peds.2017.8289189__2018, doi:10.1109/peds.2017.8289189 .

D. Weber et al., “Lifetime Extension of Photovoltaic Modules by Influencing the Module Temperature Using Phase Change Material,” 10.1109/PVSC.2018.8548115__presented at the World Conference on Photovoltaic Energy Conversion (WCPEC-7), 45th IEEE PVSC, 28th PVSEC, 34th EU PVSEC, Waikoloa Village, Big Island, Hawaii (USA), 2018, doi: 10.1109/PVSC.2018.8548115 .

K. Peter, F. Mink, and J. Böcker, “Model-based control structure for high-speed permanent magnet synchronous drives,”10.1109/iemdc.2017.8002284__presented at the International Electric Machines and Drives Conference (IEMDC),10.1109/iemdc.2017.8002284__Miami, FL, USA, 2017, doi:10.1109/iemdc.2017.8002284 .

O. Wallscheid, W. Kirchgässner, and J. Böcker, “Investigation of long short-term memory networks to temperature prediction for permanent magnet synchronous motors,”10.1109/ijcnn.2017.7966088__2017, doi:10.1109/ijcnn.2017.7966088 .

S. Bolte, C. Henkenius, J. Böcker, E. Kenig, A. Zibart, and H. Figge, “Wassergekühltes On-Board-Ladegerät mit optimiertem Kühlkanal,” wt Werkstattstechnik online, vol. 107, no. 5, p. 381ff, 2017.

S. Bolte, C. Henkenius, J. Böcker, A. Zibart, E. Kenig, and H. Figge, “Water-cooled on-board charger with optimized cooling channel,”10.23919/epe17ecceeurope.2017.8099019__presented at the European Conference on Power Electronics and Applications (EPE’17 ECCE Europe), Warsaw, Poland , 2017, doi:10.23919/epe17ecceeurope.2017.8099019 .

S. Bolte, L. Keuck, J. K. Afridi, N. Fröhleke, and J. Böcker, “Calorimetric measurements with compensating temperature control,”10.1109/isie.2017.8001320__presented at the International Symposium on Industrial Electronics (ISIE), Edinburgh, UK, 2017, doi:10.1109/isie.2017.8001320 .

M. Ott, A. Gülec, and J. Böcker, “An iterative compensation method for production tolerances in electric drive systems,”10.1109/iemdc.2017.8002052__presented at the International Electric Machines and Drives Conference (IEMDC),10.1109/iemdc.2017.8002052__Miami, FL, USA, 2017, doi:10.1109/iemdc.2017.8002052 .

S. Bolte, J. K. Afridi, and J. Böcker, “Winding concepts for high frequency inductors with reduced DC resistance,”10.1109/intlec.2017.8214182__presented at the 2017 IEEE International Telecommunications Energy Conference (INTELEC), Broadbeach, QLD, Australia, 2017, doi:10.1109/intlec.2017.8214182 .

S. Bolte, L. Wohlrab, J. K. Afridi, N. Fröhleke, and J. Böcker, “Calorimetric Measurement of Wide Bandgap Semiconductors Switching Losses,” in PCIM Europe 2017; International Exhibition and Conference for Power Electronics, Intelligent Motion, Renewable Energy and Energy Management, Nuremberg, Germany, 2017, pp. 1–6.

D. Gaona, O. Wallscheid, and J. Böcker, “Glocal identification methods for low-order lumped parameter thermal networks used in permanent magnet synchronous motors,” in 2017 IEEE 12th International Conference on Power Electronics and Drive Systems (PEDS), 2017, pp. 1–126.

D. Gaona, O. Wallscheid, and J. Böcker, “Sensitivity analysis of a permanent magnet temperature observer for PM synchronous machines using the monte carlo method,” in 2017 IEEE 12th International Conference on Power Electronics and Drive Systems (PEDS), 2017, pp. 599–606.

S. Hanke, O. Wallscheid, and J. Böcker, “A direct model predictive torque control approach to meet torque and loss objectives simultaneously in permanent magnet synchronous motor applications,” in 2017 IEEE International Symposium on Predictive Control of Electrical Drives and Power Electronics (PRECEDE), 2017, pp. 101–106.

O. Wallscheid, A. Specht, and J. Böcker, “Observing the Permanent Magnet Temperature of Synchronous Motors Based on Electrical Fundamental Wave Model Quantities,” IEEE Transactions on Industrial Electronics, vol. 64, no. 5, pp. 3921–3929, 2017.

D. Gaona, O. Wallscheid, and J. Böcker, “Fusion of a lumped-parameter thermal network and speed-dependent flux observer for PM temperature estimation in synchronous machines,” in 2017 IEEE Southern Power Electronics Conference (SPEC), 2017, pp. 1–6.

O. Wallscheid and J. Böcker, “Fusion of direct and indirect temperature estimation techniques for permanent magnet synchronous motors,” in 2017 IEEE International Electric Machines and Drives Conference (IEMDC), 2017, pp. 1–8.

O. Wallscheid and J. Böcker, “Derating of automotive drive systems using model predictive control,” in 2017 IEEE International Symposium on Predictive Control of Electrical Drives and Power Electronics (PRECEDE), 2017, pp. 31–36.

M. Ott, A. Beckmann, and J. Böcker, “A Compensation Method for Production Tolerances in Electric Drive Systems Using an Extended Open-Loop Torque Control,” presented at the European Battery, Hybrid and Fuel Cell Electric Vehicle Congress, Geneva, Switzerland, 2017.

T. Vogt, D. Weber, O. Wallscheid, and J. Böcker, “Prediction of residual power peaks in industrial microgrids using artificial neural networks,” in International Joint Conference on Neural Networks (IJCNN), 2017, pp. 3228–3235.

M. Hagemeyer, N. Fröhleke, D. V. M. M. Krishna, and J. Böcker, “Development of a flywheel energy storage-based welding system,”10.1109/spec.2016.7846049__2017, doi:10.1109/spec.2016.7846049 .

J. Böcker, “Some reflections on electromagnetic force in matter,”10.1109/speedam.2016.7525880__presented at the SPEEDAM, Capri, Italy, 2016, doi:10.1109/speedam.2016.7525880 .

K. S. C. Stille and J. Böcker, “Local demand response and load planning system for intelligent domestic appliances,”10.1109/icrera.2015.7418638__2016, doi:10.1109/icrera.2015.7418638 .

K. S. C. Stille, J. Böcker, N. Fröhleke, R. Bettentrup, and I. Kaiser, “Integration of home photovoltaic generation into electricity tariff for load optimization,”10.1109/sgcf.2016.7492441__2016, doi:10.1109/sgcf.2016.7492441 .

K. S. C. Stille, J. Böcker, N. Fröhleke, R. Bettentrup, and I. Kaiser, “Local grid load coordination for load-shiftable domestic appliances in a variable-tariff environment,”10.1109/epe.2016.7695583__2016, doi:10.1109/epe.2016.7695583 .

K. S. C. Stille, J. Böcker, N. Fröhleke, R. Bettentrup, and I. Kaiser, “Supervisional load optimization for households with intelligent domestic appliances,”10.1109/cpe.2016.7544176__2016, doi:10.1109/cpe.2016.7544176 .

O. Wallscheid, T. Huber, W. Peters, and J. Böcker, “A Critical Review of Techniques to Determine the Magnet Temperature of Permanent Magnet Synchronous Motors under Real-time Conditions,” EPE Journal, no. 25, pp. 1–10, 2016.

O. Wallscheid, U. Ammann, and J. Böcker, “Real-time capable model predictive control of permanent magnet synchronous motors using particle swarm optimisation,” in PCIM Europe 2016; International Exhibition and Conference for Power Electronics, Intelligent Motion, Renewable Energy and Energy Management, 2016, pp. 1–8.

M. Paradkar and J. Böcker, “D analytical model for estimation of eddy current loss in the magnets of IPM machines considering the reaction field of the induced eddy currents,”10.1109/iemdc.2015.7409198__2016, doi:10.1109/iemdc.2015.7409198 .

T. Huber, W. Peters, and J. Böcker, “Voltage controller for flux weakening operation of interior permanent magnet synchronous motor in automotive traction applications,”10.1109/iemdc.2015.7409195__2016, doi:10.1109/iemdc.2015.7409195 .

M. Paradkar and J. Böcker, “Analysis of eddy current losses in the stator windings of IPM machines in electric and hybrid electric vehicle applications,”10.1049/cp.2016.0320__2016, doi:10.1049/cp.2016.0320 .

K. Peter, J. Böcker, F. Mink, and S. Beineke, “Comparison of quarter-wave with half-wave symmetrical pulse patterns applied in electrical high-speed drives,”10.1049/cp.2016.0358__2016, doi:10.1049/cp.2016.0358 .

C. Schulte, K. Peter, J. Böcker, and M. Leuer, “Comparison of Optimized Pulse Patterns with Direct Model Predictive Control Using Co-Simulation,”10.1049/cp.2016.0331__2016, doi:10.1049/cp.2016.0331 .

K. Peter, S. Hanke, F. Mink, and J. Böcker, “Inverter loss management for an electrical high-speed drive system,”10.1109/epe.2016.7695587__2016, doi:10.1109/epe.2016.7695587 .

M. Ott and J. Böcker, “Sensitivity analysis on production tolerances for electric drive systems in automotive application,”10.1109/epe.2016.7695392__2016, doi:10.1109/epe.2016.7695392 .

M. Leuer, M. Lönneker, and J. Böcker, “Model predictive control strategy for multi-phase thyristor matrix converters — Advantages, problems and solutions,”10.1109/epe.2016.7695350__2016, doi:10.1109/epe.2016.7695350 .

S. Bolte, N. Fröhleke, and J. Böcker, “Comparison of the performance of gallium nitride (GaN) transistors in a totem-pole power factor controlled (PFC) rectifier,”10.1109/intlec.2016.7749113__2016, doi:10.1109/intlec.2016.7749113 .

T. Vogt, R. Pahl, N. Fröhleke, and J. Böcker, “Determination of storage loss characteristics with reasonable measurement and calculation effort,”10.1109/epe.2016.7695689__2016, doi:10.1109/epe.2016.7695689 .

M. Leuer, M. Lönneker, and J. Böcker, “Direct Model Predictive Control strategy for multi-phase thyristor matrix converters,”10.1109/precede.2015.7395589__2016, doi:10.1109/precede.2015.7395589 .

S. Bolte, N. Fröhleke, and J. Böcker, “DC-DC converter design for power distribution systems in electric vehicles using calorimetric loss measurements,”10.1109/epe.2016.7695644__2016, doi:10.1109/epe.2016.7695644 .

C. Henkenius, N. Fröhleke, J. Böcker, and H. Figge, “Numerical optimization of passive line filter components for suppression of electromagnetic interference (EMI),”10.1109/apec.2016.7468073__2016, doi:10.1109/apec.2016.7468073 .

S. Bolte, N. Fröhleke, and J. Böcker, “Efficiency optimization for a power factor correction (PFC) rectifier with gallium nitride transistor,”10.1109/wipda.2015.7369288__2016, doi:10.1109/wipda.2015.7369288 .

C. Henkenius, N. Fröhleke, and J. Böcker, “Analysis and design of integrated common and differential mode inductors,”10.1109/intlec.2016.7749121__2016, doi:10.1109/intlec.2016.7749121 .

K. S. C. Stille, J. Böcker, R. Bettentrup, and I. Kaiser, “Concept for a hierarchical load control for domestic appliances in smart grids,”10.1109/icage.2014.7050153__2015, doi:10.1109/icage.2014.7050153 .

K. S. C. Stille, J. Böcker, R. Bettentrup, and I. Kaiser, “Hierarchisches Optimierungskonzept für die Laststeuerung von Haushaltsgeräten,” 2015.

O. Wallscheid and J. Böcker, “Global Identification of a Low-Order Lumped-Parameter Thermal Network for Permanent Magnet Synchronous Motors,” IEEE Transactions on Energy Conversion, vol. 31, no. 1, pp. 354–365, 2015.

O. Wallscheid, M. Meyer, and J. Böcker, “An open-loop operation strategy for induction motors considering iron losses and saturation effects in automotive applications,” in 2015 IEEE 11th International Conference on Power Electronics and Drive Systems, 2015, pp. 981–985.

O. Wallscheid and J. Böcker, “Design and Identification of a Lumped-Parameter Thermal Network for Permanent Magnet Synchronous Motors Based on Heat Transfer Theory and Particle Swarm Optimisation,” 2015.

O. Wallscheid and J. Böcker, “Design and Empirical Identification of a Lumped Parameter Thermal Network for Permanent Magnet Synchronous Motors with Physically Motivated Constraints,” 2015.

C. Schulte and J. Böcker, “Co-simulation of an interior permanent magnet synchronous motor with segmented rotor structure,”10.1109/iecon.2014.7048537__2015, doi:10.1109/iecon.2014.7048537 .

M. Leuer and J. Böcker, “Switching strategy for Direct Model Predictive Control in power converter and drive applications with high switching frequency,”10.1109/icara.2015.7081210__2015, doi:10.1109/icara.2015.7081210 .

K. Peter and J. Böcker, “Operating electrical high speed drives with pulse patterns of specific harmonic content,”10.1109/ecce.2015.7310076__2015, doi:10.1109/ecce.2015.7310076 .

M. Leuer and J. Böcker, “Self-optimizing Model Predictive Direct Torque Control for electrical drives,”10.1109/isie.2015.7281616__2015, doi:10.1109/isie.2015.7281616 .

M. Paradkar and J. Böcker, “D analytical model for estimation of eddy currentlosses in the magnets of IPM machine considering the reaction field of the induced eddy currents,”10.1109/ecce.2015.7310061__2015, doi:10.1109/ecce.2015.7310061 .

J. Solanki, N. Fröhleke, J. Böcker, G. Duppe, A. Averberg, and P. Wallmeier, “Voltage-Sequence-Control-Based High-Current Rectifier System,”10.1109/tia.2015.2422772__IEEE Transactions on Industry Applications, vol. 51, no. 5, pp. 3995–4005, 2015, doi:10.1109/tia.2015.2422772 .

S. Bolte, A. Speerschneider, N. Fröhleke, and J. Böcker, “A comparison of on-board chargers for electric vehicles with variable DC-link voltage,”10.1109/sege.2015.7324598__2015, doi:10.1109/sege.2015.7324598 .

C. Henkenius, N. Fröhleke, J. Böcker, H. Figge, and T. Grote, “DCM detection for on-line adaption of control parameters for totem-pole PFC rectifier,”10.1109/icit.2015.7125400__2015, doi:10.1109/icit.2015.7125400 .

L. Keuck, N. Fröhleke, J. Böcker, and A. Ziessler, “PFC-control for improved inductor utilization,”10.1109/epe.2015.7309373__2015, doi:10.1109/epe.2015.7309373 .

T. Vogt, L. Keuck, N. Fröhleke, J. Böcker, and S. Kempen, “Analysis of industrial microgrid power curves based on the theory of stochastic variables for control system development and component sizing,”10.1109/icage.2014.7050145__2015, doi:10.1109/icage.2014.7050145 .

M. Hagemeyer, J. Solanki, N. Fröhleke, J. Böcker, A. Averberg, and P. Wallmeier, “Comparison of PWM AC chopper topologies,”10.1109/iecon.2014.7048673__2015, doi:10.1109/iecon.2014.7048673 .

M. Leuer and J. Böcker, “Voltage utilization in Model Predictive Control for IPMSM,”10.1109/pedes.2014.7042062__2015, doi:10.1109/pedes.2014.7042062 .

L. Keuck et al., “Neuro control of a PFC rectifier for harmonic reduction at partial loads,”10.1109/icage.2014.7050149__2015, doi:10.1109/icage.2014.7050149 .

T. Vogt, N. Fröhleke, J. Böcker, and S. Kempen, “Multi-Objective Storage Operating Strategy for Industrial Microgrids,” Seoul, Korea, 2015.

T. Vogt, N. Fröhleke, J. Böcker, and S. Kempen, “Mehrziel-Speicherbetriebsstrategie für industrielle Microgrids,” presented at the ETG-Fachtagung eVon Smart Grids zu Smart Markets“, Kassel, 2015.

J. Solanki, N. Fröhleke, and J. Böcker, “Implementation of Hybrid Filter for 12-Pulse Thyristor Rectifier Supplying High-Current Variable-Voltage DC Load,”10.1109/TIE.2015.2393833__presented at the IEEE Transaction on Industrial Electronics, vol.62, no.8, pp.4691-4701, 2015, doi:10.1109/TIE.2015.2393833 .

W. Peters, O. Wallscheid, and J. Böcker, “Optimum Efficiency Control of Interior Permanent Magnet Synchronous Motors in Drive Trains of Electric and Hybrid Vehicles,”10.1109/EPE.2015.7311680__2015, doi:10.1109/EPE.2015.7311680 .

O. Wallscheid, T. Huber, W. Peters, and J. Böcker, “Real-time capable methods to determine the magnet temperature of permanent magnet synchronous motors—A review,” in IECON 2014-40th Annual Conference of the IEEE Industrial Electronics Society, 2014, pp. 811–818.

A. Specht, O. Wallscheid, and J. Böcker, “Determination of rotor temperature for an interior permanent magnet synchronous machine using a precise flux observer,” in 2014 International Power Electronics Conference (IPEC-Hiroshima 2014-ECCE ASIA), 2014, pp. 1501–1507.

W. Peters and J. Böcker, “Discrete-time design of adaptive current controller for interior permanent magnet synchronous motors (IPMSM) with high magnetic saturation,”10.1109/iecon.2013.6700225__2014, doi:10.1109/iecon.2013.6700225 .

O. Buchholz and J. Böcker, “FPGA-based dynamically reconfigurable control of induction motor drives,”10.1109/iecon.2013.6699698__2014, doi:10.1109/iecon.2013.6699698 .

T. Huber, W. Peters, and J. Böcker, “Monitoring critical temperatures in permanent magnet synchronous motors using low-order thermal models,”10.1109/ipec.2014.6869785__2014, doi:10.1109/ipec.2014.6869785 .

M. Leuer and J. Böcker, “Real-time implementation of an online Model Predictive Control for IPMSM using parallel computing on FPGA,”10.1109/ipec.2014.6869605__2014, doi:10.1109/ipec.2014.6869605 .

M. Leuer, A. Ruting, and J. Böcker, “Efficiency-optimized Model Predictive Torque Control for IPMSM,”10.1109/energycon.2014.6850398__2014, doi:10.1109/energycon.2014.6850398 .

O. Buchholz and J. Böcker, “FPGA-based dynamically reconfigurable control of induction motor drives,”10.1109/iecon.2013.6699698__2014, doi:10.1109/iecon.2013.6699698 .

T. Vogt, A. Peters, N. Fröhleke, J. Böcker, and S. Kempen, “Power profile based selection and operation optimization of parallel-connected power converter combinations,”10.1109/ipec.2014.6870091__2014, doi:10.1109/ipec.2014.6870091 .

J. Solanki, N. Fröhleke, J. Böcker, G. Duppe, A. Averberg, and P. Wallmeier, “Voltage sequence control based high-current rectifier system,”10.1109/ecce.2014.6953958__2014, doi:10.1109/ecce.2014.6953958 .

J. Solanki, N. Fröhleke, and J. Böcker, “A completely modular power converter for high-power high-current DC applications,”10.1109/iecon.2013.6699127__2014, doi:10.1109/iecon.2013.6699127 .

T. Vogt, J. Böcker, and S. Kempen, “Die Rolle von Batteriespeichern in KMU-Microgrids,” BWK – Das Energie-Fachmagazin – Springer VDI Verlag, Ausgabe 12-2014, 2014.

T. Vogt, N. Fröhleke, J. Böcker, and S. Kempen, “Design Considerations on Peak Power Clipping Thresholds in Microgrids,” presented at the 6th World Conference on Photovoltaic Energy Conversion (WCPEC), IEEE Kyoto, Japan, 2014.

J. Gausemeier, P. Iwanek, R. Dorociak, K. S. C. Stille, and J. Böcker, “Konzipierung eines selbstoptimierenden hybriden Energiespeichersystems unter besonderer Berücksichtigung der Verlässlichkeit,” 2013.

J. Böcker, O. Buchholz, C. Romaus, C. Schulte, and K. S. C. Stille, “Selbstoptimierung in der Anwendung,” 2013.

K. S. C. Stille and J. Böcker, “Crosslinked Test Benches,” in Design Methodology for Intelligent Technical Systems, J. Gausemeier, F. Josef Rammig, and W. Schäfer, Eds. Springer, 2013, pp. 46–49.

K. S. C. Stille, C. Romaus, and J. Böcker, “Online capable optimized planning of power split in a hybrid energy storage system,”10.1109/eurocon.2013.6625127__2013, doi:10.1109/eurocon.2013.6625127 .

C. Romaus, D. Wimmelbücker, K. S. C. Stille, and J. Böcker, “Self-optimization energy management considering stochastic influences for a hybrid energy storage of an electric road vehicle,”10.1109/iemdc.2013.6556194__2013, doi:10.1109/iemdc.2013.6556194 .

O. Wallscheid and J. Böcker, “Wirkungsgradoptimale Arbeitspunktsteuerung für einen permanenterregten Synchronmotor mit vergrabenen Magneten unter Berücksichtigung von Temperatureinflüssen,” 2013.

A. Specht, S. Ober-Blöbaum, O. Wallscheid, C. Romaus, and J. Böcker, “Discrete-time model of an IPMSM based on variational integrators,” in Electric Machines &; Drives Conference (IEMDC), 2013 IEEE International, 2013, pp. 1411–1417.

H. Figge, T. Grote, N. Fröhleke, J. Böcker, and F. Schafmeister, “Two-Phase Interleaving Configuration of the LLC Resonant Converter - Analysis and Experimental Evaluation,” in Proc. IEEE Annual Industrial Electronics Society Conference (IECON), Vienna, Austria, 2013, pp. 1392–1397.

K. S. C. Stille, C. Romaus, and J. Böcker, “Hybrid Energy Storage System (HES),” in Design Methodology for Intelligent Technical Systems, J. Gausemeier, F. Josef Rammig, and W. Schäfer, Eds. Springer, 2013, pp. 42–46.

M. Paradkar and J. Böcker, “Design of a high performance ferrite magnet-assisted synchronous reluctance motor for an electric vehicle,”10.1109/iecon.2012.6389234__2013, doi:10.1109/iecon.2012.6389234 .

M. Leuer and J. Böcker, “Fast online model predictive control of IPMSM using parallel computing on FPGA,”10.1109/iemdc.2013.6556221__2013, doi:10.1109/iemdc.2013.6556221 .

C. Schulte and J. Böcker, “Co-simulation of an electric traction drive,”10.1109/iemdc.2013.6556215__2013, doi:10.1109/iemdc.2013.6556215 .

L. Tong, H. Zou, M. Sun, and J. Böcker, “Low Latency Hybrid Hardware-in-the-Loop Simulator for Railway Traction System,”10.1109/vppc.2013.6671735__2013, doi:10.1109/vppc.2013.6671735 .

D. V. M. M. Krishna, H. Preckwinkel, N. Fröhleke, and J. Böcker, “A Novel LC Resonant Based Partial Booster Scheme for Improved Efficiency and Reduced Cost of Transformerless Photovoltaic Inverters,” 2013.

S. Bolte, J. Baurichter, C. Henkenius, N. Fröhleke, J. Böcker, and H. Figge, “Verlustmodellierung und Effizienzoptimierung einer hart schaltenden, netzfreundlichen Pulsgleichrichterstufe (PFC),” 2013.

K. Peter and J. Böcker, “Minimierung niederfrequenter Oberschwingungen in Pulsmustern für 2-Level Umrichter in Antriebssystemen mittels winkelmodulierter Partikel Schwarm Optimierung,” 2013.

L. Keuck, N. Fröhleke, and J. Böcker, “Formaler Regelungsentwurf für netzfreundliche PFC-Ladegleichrichter unter Anwendung eines Netzbeobachters,” 2013.