Mechanical joining without auxiliary element by cold formed pins for multi-material-systems
M. Kraus, P. Frey, T. Kleffel, D. Drummer, M. Merklein, AIP Conference Proceedings 2113 (2019) 050006.
LibreCat: /record/30716
DOI: 10.1063/1.5112570

Numerical analysis of the robustness of clinching process considering the pre-forming of the parts 
C.R. Bielak, M. Böhnke, R. Beck, M. Bobbert, G. Meschut, Journal of Advanced Joining Processes.  (2020).
LibreCat: /record/20678
DOI: https://doi.org/10.1016/j.jajp.2020.100038

A New Approach for the Evaluation of Component and Joint Loads Based on Load Path Analysis
C. Steinfelder, A. Brosius, Lecture Notes in Production Engineering (2020) 134–141.
LibreCat: /record/30706
DOI: 10.1007/978-3-662-62138-7_14

Characterization and Numerical Modelling of Through-Thickness Metallic-Pin-Reinforced Fibre/Thermoplastic Composites under Bending Loading
H. Böhm, H. Zhang, B. Gröger, A. Hornig, M. Gude, Journal of Composites Science 4 (2020) 188.
LibreCat: /record/30704
DOI: 10.3390/jcs4040188

Investigation of Clinched Joints – A Finite Element Simulation of a Non-destructive Approach
B. Sadeghian, C. Guilleaume, R. Lafarge, A. Brosius, Lecture Notes in Production Engineering (2020) 116–124.
LibreCat: /record/30707
DOI: 10.1007/978-3-662-62138-7_12

Untersuchungen zum Einfluss von Geometrieparametern bei artgleichen Al-Clinchverbindungen auf das Ermüdungsverhalten im Bereich hoher bis sehr hoher Lastspielzahlen
L. Ewenz, S. Schettler, A.T. Zeuner, M. Zimmermann, Tagung Werkstoffprüfung 2020. Werkstoffe Und Bauteile Auf Dem Prüfstand. Prüftechnik - Kennwertermit (2020).
LibreCat: /record/30711
DOI: 10.48447/WP-2020-039

Influence of Nozzle Shape on Near-Surface Segregation Formation During Twin-Roll Casting of Aluminum Strips
O. Grydin, M. Stolbchenko, M. Schaper, in: Light Metals 2020, Cham, 2020, pp. 1039–1044.
LibreCat: /record/24575
DOI: 10.1007/978-3-030-36408-3_141

Experimental and Numerical Studies on the Deformation of a Flexible Wire in an Injection Moulding Process
D. Köhler, B. Gröger, R. Kupfer, A. Hornig, M. Gude, Procedia Manufacturing 47 (2020) 940–947.
LibreCat: /record/30712
DOI: 10.1016/j.promfg.2020.04.288

Potentiale datengestützter Methoden zur Gestaltung und Optimierung mechanischer Fügeverbindungen
C. Zirngibl, B. Schleich, S. Wartzack, Proceedings of the 31st Symposium Design for X (D) (2020).
LibreCat: /record/30710
DOI: 10.35199/dfx2020.8

Clinching in in-situ CT—A numerical study on suitable tool materials
D. Köhler, R. Kupfer, M. Gude, Journal of Advanced Joining Processes 2 (2020) 100034.
LibreCat: /record/30709
DOI: 10.1016/j.jajp.2020.100034

Potential of Joining Dissimilar Materials by Cold Formed Pin-Structures
M. Kraus, M. Merklein, Journal of Materials Processing Technology 283 (2020) 116697.
LibreCat: /record/30703
DOI: 10.1016/j.jmatprotec.2020.116697

Development of a numerical method for analyzing the robustness of clinching in versatile process chains
C.R. Bielak, M. Böhnke, M. Bobbert, G. Meschut, in: Material Science and Engineering Congress - MSE 2020, n.d.
LibreCat: /record/20344

Test Method for Friction Characterization of Rivets
S. Wituschek, C.M. Kuball, M. Merklein, M. Lechner, Defect and Diffusion Forum 404 (2020) 132–137.
LibreCat: /record/30721
DOI: 10.4028/www.scientific.net/ddf.404.132

Development of a special specimen geometry for the experimental determination of fracture mechanical parameters of clinchable metal sheets
D. Weiß, B. Schramm, G. Kullmer, 28 (2020) 2335–2341.
LibreCat: /record/23980
DOI: 10.1016/j.prostr.2020.11.081

Experimental and numerical preliminary investigations of the base material and preformed components regarding fatigue crack growth in joined structures
D. Weiß, B. Schramm, G. Kullmer, in: 2020.
LibreCat: /record/23982

Investigation of influencing parameters on the joint formation of the self-piercing riveting process
F. Kappe, S. Wituschek, M. Lechner, M. Bobbert, G. Meschut, M. Merklein, in: 2020.
LibreCat: /record/20680

Probability Distribution of Joint Point Loadings in Car Body Structures under Global Bending and Torsion
S. Martin, A.A. Camberg, T. Tröster, Procedia Manufacturing (2020) 419–424.
LibreCat: /record/16859
DOI: 10.1016/j.promfg.2020.04.324

Joining with Versatile Friction-Spun Joint Connectors
T. Rostek, E. Wiens, W. Homberg, Procedia Manufacturing 47 (2020) 395–399.
LibreCat: /record/30713
DOI: 10.1016/j.promfg.2020.04.313

Clinching in in-situ CT—A numerical study on suitable tool materials
D. Köhler, R. Kupfer, M. Gude, Journal of Advanced Joining Processes 2 (2020).
LibreCat: /record/51203
DOI: 10.1016/j.jajp.2020.100034

Inverse parameter identification of an anisotropic plasticity model for sheet metal
J. Friedlein, S. Wituschek, M. Lechner, J. Mergheim, P. Steinmann, IOP Conference Series: Materials Science and Engineering 1157 (2021) 012004.
LibreCat: /record/30647
DOI: 10.1088/1757-899X/1157/1/012004

Energy direction in ultrasonic impregnation of continuous fiber-reinforced thermoplastics
J. Popp, M. Wolf, T. Mattner, D. Drummer, Journal of Composites Science 5 (2021) 239.
LibreCat: /record/30645
DOI: 10.3390/jcs5090239

Influence of the production process on the binding mechanism of clinched aluminum steel mixed compounds
J. Kalich, U. Füssel, Journal of Manufacturing and Materials Processing 5 (2021) 105.
LibreCat: /record/30643
DOI: 10.3390/jmmp5040105

Stochastic local FEM for computational homogenization of heterogeneous materials exhibiting large plastic deformations
D. Pivovarov, J. Mergheim, K. Willner, P. Steinmann, Computational Mechanics (2021).
LibreCat: /record/30644
DOI: 10.1007/s00466-021-02099-x

Anisotropic plasticitydamage material model for sheet metal — Regularised single surface formulation
J. Friedlein, J. Mergheim, P. Steinmann, PAMM 21 (2021).
LibreCat: /record/30642
DOI: 10.1002/pamm.202100068

Further development of a numerical method for analyzing the load capacity of clinched joints in versatile process chains
C.R. Bielak, M. Böhnke, M. Bobbert, G. Meschut, in: ESAFORM 2021, n.d.
LibreCat: /record/20807
DOI: 10.25518/esaform21.4298

Data-driven analysis of cold-formed pin structure characteristics in the context of versatile joining processes
D. Römisch, C. Zirngibl, B. Schleich, S. Wartzack, M. Merklein, IOP Conference Series: Materials Science and Engineering 1157 (2021) 012077.
LibreCat: /record/30650
DOI: 10.1088/1757-899X/1157/1/012077

Numerical and experimental investigation of the transmission moment of clinching points
C. Steinfelder, J. Kalich, A. Brosius, U. Füssel, IOP Conference Series: Materials Science and Engineering 1157 (2021) 012003.
LibreCat: /record/30648
DOI: 10.1088/1757-899x/1157/1/012003

Fiber Orientation Mechanism of Continuous Fiber Reinforced Thermoplastics Hybrid Parts Joined with Metallic Pins
J. Popp, T. Kleffel, D. Römisch, T. Papke, M. Merklein, D. Drummer, Applied Composite Materials 28 (2021) 951–972.
LibreCat: /record/30653
DOI: 10.1007/s10443-021-09892-0

Clinching of Thermoplastic Composites and Metals—A Comparison of Three Novel Joining Technologies
B. Gröger, J. Troschitz, J. Vorderbrüggen, C. Vogel, R. Kupfer, G. Meschut, M. Gude, Materials 14 (2021) 2286.
LibreCat: /record/30652
DOI: 10.3390/ma14092286X

Determination of the Interface Structural Resolution of an Industrial X-Ray Computed Tomograph Using a Spherical Specimen and a Gap Specimen Consisting of Gauge Blocks
M. Busch, T. Hausotte, Key Engineering Materials 883 (2021) 41–48.
LibreCat: /record/30662
DOI: 10.4028/www.scientific.net/kem.883.41

Clinching in In-situ CT – Experimental Study on Suitable Tool Materials
D. Köhler, R. Kupfer, J. Troschitz, M. Gude, ESAFORM 2021 (2021).
LibreCat: /record/30659
DOI: 10.25518/esaform21.2781

In Situ Computed Tomography—Analysis of a Single-Lap Shear Test with Clinch Points
D. Köhler, R. Kupfer, J. Troschitz, M. Gude, Materials 14 (2021) 1859.
LibreCat: /record/30661
DOI: 10.3390/ma14081859

Friction Characterisation for a Tumbling Self-Piercing Riveting Process
S. Wituschek, M. Lechner, Key Engineering Materials 883 (2021) 27–34.
LibreCat: /record/30719
DOI: 10.4028/www.scientific.net/kem.883.27

Joining with Friction Spun Joint Connectors – Manufacturing and Analysis
C. Wischer, C. Steinfelder, W. Homberg, A. Brosius, IOP Conference Series: Materials Science and Engineering 1157 (2021) 012007.
LibreCat: /record/30649
DOI: 10.1088/1757-899x/1157/1/012007

A contribution on versatile process chains: joining with adaptive joining elements, formed by friction spinning
C. Wischer, W. Homberg, Production Engineering (2021).
LibreCat: /record/30702
DOI: 10.1007/s11740-021-01094-8

Numerical and Experimental Fracture Mechanical Investigations of Clinchable Sheet Metals Made of HX
D. Weiß, B. Schramm, G. Kullmer, Key Engineering Materials 883 (2021) 127–132.
LibreCat: /record/30680
DOI: 10.4028/www.scientific.net/kem.883.127

Computed tomography investigation of the material structure in clinch joints in aluminium fibre-reinforced thermoplastic sheets
B. Gröger, D. Köhler, J. Vorderbrüggen, J. Troschitz, R. Kupfer, G. Meschut, M. Gude, Production Engineering (2021).
LibreCat: /record/30698
DOI: 10.1007/s11740-021-01091-x

Holistic investigation chain for the experimental determination of fracture mechanical material parameters with special specimens
D. Weiß, B. Schramm, G. Kullmer, Production Engineering (2021).
LibreCat: /record/30699
DOI: 10.1007/s11740-021-01096-6

Approach for the automated and data-based design of mechanical joints
C. Zirngibl, B. Schleich, S. Wartzack, Proceedings of the Design Society 1 (2021) 521.
LibreCat: /record/30696
DOI: 10.1017/pds.2021.52

Application of reinforcement learning for the optimization of clinch joint characteristics
C. Zirngibl, F. Dworschak, B. Schleich, S. Wartzack, Production Engineering (2021).
LibreCat: /record/30700
DOI: 10.1007/s11740-021-01098-4

Joining of CFRT-steel hybrid parts via hole-forming and subsequent pin caulking
D. Römisch, J. Popp, D. Drummer, M. Merklein, Production Engineering (2021).
LibreCat: /record/30701
DOI: 10.1007/s11740-021-01093-9

A New Non-destructive Testing Method Applied to Clinching
R. Lafarge, A. Wolf, C. Guilleaume, A. Brosius, Minerals, Metals and Materials Series (2021) 1461.
LibreCat: /record/30697
DOI: 10.1007/978-3-030-75381-8_121

Experimental study on joining by forming of hx + z and en-aw 6014 sheets using cold extruded pin structures
D. Römisch, M. Kraus, M. Merklein, Journal of Manufacturing and Materials Processing 5 (2021) 25.
LibreCat: /record/30684
DOI: 10.3390/jmmp5010025

Investigation of Different Joining by Forming Strategies when Connecting Different Metals without Auxiliary Elements
D. Römisch, M. Kraus, M. Merklein, Key Engineering Materials 883 (2021) 19–26.
LibreCat: /record/30682
DOI: 10.4028/www.scientific.net/kem.883.19

Material characterisation methods for a tumbling self-piercing riveting process
S. Wituschek, M. Lechner, ESAFORM 2021 (2021).
LibreCat: /record/30718
DOI: 10.25518/esaform21.398

A Method for Characterization of Geometric Deviations in Clinch Points with Computed Tomography and Transient Dynamic Analysis
D. Köhler, B. Sadeghian, R. Kupfer, J. Troschitz, M. Gude, A. Brosius, Key Engineering Materials 883 (2021) 89–96.
LibreCat: /record/30683
DOI: 10.4028/www.scientific.net/kem.883.89

Effect of Different Tool Geometries on the Mechanical Properties of Al-Al Clinch Joints
L. Ewenz, J. Kalich, M. Zimmermann, U. Füssel, Key Engineering Materials 883 (2021) 65–72.
LibreCat: /record/30663
DOI: 10.4028/www.scientific.net/kem.883.65

Modelling of thermally supported clinching of fibre-reinforced thermoplastics: Approaches on mesoscale considering large deformations and fibre failure
B. Gröger, A. Hornig, A. Hoog, M. Gude, ESAFORM 2021 - 24th International Conference on Material Forming (2021).
LibreCat: /record/30688
DOI: 10.25518/esaform21.4293

Development of a novel adaptive joining technology employing friction-spun joint connectors (FSJC)
E. Wiens, C. Wischer, W. Homberg, ESAFORM (2021) 4682.
LibreCat: /record/30685
DOI: 10.25518/esaform21.4682

A First Approach for the Treatment of Galvanic Corrosion and of Load-Bearing Capacity of Clinched Joints
S. Harzheim, C. Steinfelder, T. Wallmersperger, A. Brosius, Key Engineering Materials 883 (2021) 97–104.
LibreCat: /record/30664
DOI: 10.4028/www.scientific.net/kem.883.97

A finite plasticity gradient-damage model for sheet metals during forming and clinching
J. Friedlein, J. Mergheim, P. Steinmann, Key Engineering Materials 883 KEM (2021) 57.
LibreCat: /record/30694
DOI: 10.4028/www.scientific.net/KEM.883.57

Temperature dependent modelling of fibre-reinforced thermoplastic organo-sheet material for forming and joining process simulations
B. Gröger, A. Hornig, A. Hoog, M. Gude, Key Engineering Materials 883 KEM (2021) 49.
LibreCat: /record/30689
DOI: 10.4028/www.scientific.net/KEM.883.49

A first Model of Fatigue Corrosion of a Metal through Hydrogen Embrittlement
M. Hofmann, Y. Shi, T. Wallmersperger, PAMM 20 (2021).
LibreCat: /record/30720
DOI: 10.1002/pamm.202000122

Approach for the automated analysis of geometrical clinch joint characteristics
C. Zirngibl, B. Schleich, Key Engineering Materials 883 KEM (2021) 105.
LibreCat: /record/30695
DOI: 10.4028/www.scientific.net/KEM.883.105

Parametric FEM for computational homogenization of heterogeneous materials with random voids
D. Pivovarov, J. Mergheim, K. Willner, P. Steinmann, in: PAMM, Wiley, 2021.
LibreCat: /record/34208
DOI: 10.1002/pamm.202000071

Concept development of a method for identifying friction coefficients for the numerical simulation of clinching processes
M. Böhnke, M.S. Rossel, C.R. Bielak, M. Bobbert, G. Meschut, The International Journal of Advanced Manufacturing Technology (2021).
LibreCat: /record/25556
DOI: 10.1007/s00170-021-07986-4

Influence of pin geometry on the joint strength of CFRT-metal hybrid parts with metallic pins
J. Popp, T. Kleffel, D. Drummer, Joining Plastics 15 (2021).
LibreCat: /record/38517

Entwicklung einer Methode zur differenzierten Messung des Wachstums der Rissenden von Innenrissen mit der Elektropotentialmethode
G. Kullmer, D. Weiß, B. Schramm, in: 2021, pp. 107–116.
LibreCat: /record/34472
DOI: 10.48447/BR-2021-013

Experimentelle bruchmechanische Untersuchung eines clinchgeeigneten Bleches aus HX mithilfe einer neuen Probengeometrie
D. Weiß, B. Schramm, M. Neuser, O. Grydin, G. Kullmer, in: 2021, pp. 231–240.
LibreCat: /record/24006
DOI: 10.48447/BR-2021-025

Development of a Method for the Identification of Friction Coefficients in Sheet Metal Materials for the Numerical Simulation of Clinching Processes
M.S. Rossel, M. Böhnke, C.R. Bielak, M. Bobbert, G. Meschut, Key Engineering Materials 883 (2021) 81–88.
LibreCat: /record/34227
DOI: 10.4028/www.scientific.net/kem.883.81

Influence of rivet length on joint formation on self-piercing riveting process considering further process parameters
F. Kappe, C.R. Bielak, V. Sartisson, M. Bobbert, G. Meschut, in: ESAFORM 2021, University of Liege, 2021.
LibreCat: /record/34222
DOI: 10.25518/esaform21.4277

Influence of various procedures for the determination of flow curves on the predictive accuracy of numerical simulations for mechanical joining processes
M. Böhnke, F. Kappe, M. Bobbert, G. Meschut, Materials Testing 63 (2021) 493–500.
LibreCat: /record/22798
DOI: 10.1515/mt-2020-0082

New Approach for Versatile Self Piercing Riveting: Joining System and Auxiliary Part
F. Kappe, M. Bobbert, G. Meschut, Key Engineering Materials 883 (2021) 3–10.
LibreCat: /record/34226
DOI: 10.4028/www.scientific.net/kem.883.3

Investigation of the influence of varying tumbling strategies on a tumbling self-piercing riveting process
S. Wituschek, F. Kappe, M. Lechner, Production Engineering (2021).
LibreCat: /record/30200
DOI: 10.1007/s11740-021-01099-3

Load Path Transmission in Joining Elements
C. Steinfelder, S. Martin, A. Brosius, T. Tröster, Key Engineering Materials (2021) 73–80.
LibreCat: /record/24541
DOI: 10.4028/www.scientific.net/kem.883.73

Joint point loadings in car bodies – the influence of manufacturing tolerances and scatter in material properties
S. Martin, T. Tröster, ESAFORM 2021 (2021).
LibreCat: /record/24548
DOI: 10.25518/esaform21.3801

Joining with versatile joining elements formed by friction spinning
C. Wischer, E. Wiens, W. Homberg, Journal of Advanced Joining Processes 3 (2021).
LibreCat: /record/26082
DOI: 10.1016/j.jajp.2021.100060

A Method for Characterization of Geometric Deviations in Clinch Points with Computed Tomography and Transient Dynamic Analysis
D. Köhler, B. Sadeghian, R. Kupfer, J. Troschitz, M. Gude, A. Brosius, Key Engineering Materials 883 (2021) 89–96.
LibreCat: /record/51202
DOI: 10.4028/www.scientific.net/kem.883.89

Computed tomography investigation of the material structure in clinch joints in aluminium fibre-reinforced thermoplastic sheets
B. Gröger, D. Köhler, J. Vorderbrüggen, J. Troschitz, R. Kupfer, G. Meschut, M. Gude, Production Engineering 16 (2021) 203–212.
LibreCat: /record/51199
DOI: 10.1007/s11740-021-01091-x

In Situ Computed Tomography—Analysis of a Single-Lap Shear Test with Clinch Points
D. Köhler, R. Kupfer, J. Troschitz, M. Gude, Materials 14 (2021).
LibreCat: /record/51200
DOI: 10.3390/ma14081859

Clinching in In-situ CT – Experimental Study on Suitable Tool Materials
D. Köhler, R. Kupfer, J. Troschitz, M. Gude, ESAFORM 2021 (2021).
LibreCat: /record/51201
DOI: 10.25518/esaform21.2781

Characterisation of lateral offsets in clinch points with computed tomography and transient dynamic analysis
D. Köhler, B. Sadeghian, J. Troschitz, R. Kupfer, M. Gude, A. Brosius, Journal of Advanced Joining Processes 5 (2021).
LibreCat: /record/51198
DOI: 10.1016/j.jajp.2021.100089

Effect of Solidification Rates at Sand Casting on the Mechanical Joinability of a Cast Aluminium Alloy
M. Neuser, O. Grydin, A. Andreiev, M. Schaper, Metals (2021).
LibreCat: /record/24535
DOI: 10.3390/met11081304

Joining suitability of cast aluminium for self-piercing riveting
M. Neuser, F. Kappe, M. Busch, O. Grydin, M. Bobbert, M. Schaper, G. Meschut, T. Hausotte, IOP Conference Series: Materials Science and Engineering (2021).
LibreCat: /record/24537
DOI: 10.1088/1757-899x/1157/1/012005

Identification of joints for a load-adapted shape in a body in white using steady state vehicle simulations
S. Martin, J. Schütte, C. Bäumler, W. Sextro, T. Tröster, Forces in Mechanics 6 (2021).
LibreCat: /record/29293
DOI: 10.1016/j.finmec.2021.100065

Mechanical Properties and Joinability of AlSi9 Alloy Manufactured by TwinRoll Casting
M. Neuser, F. Kappe, J. Ostermeier, J.T. Krüger, M. Bobbert, G. Meschut, M. Schaper, O. Grydin, Advanced Engineering Materials 24 (2022).
LibreCat: /record/34207
DOI: 10.1002/adem.202200874

Influence of Kinematic Hardening on Clinch Joining of Dual-Phase Steel HX Sheet Metal
J. Friedlein, J. Mergheim, P. Steinmann, in: The Minerals, Metals &;amp; Materials Series, Springer International Publishing, Cham, 2022.
LibreCat: /record/34211
DOI: 10.1007/978-3-031-06212-4_31

Numerical and experimental identification of fatigue crack initiation sites in clinched joints
L. Ewenz, C.R. Bielak, M. Otroshi, M. Bobbert, G. Meschut, M. Zimmermann, Production Engineering 16 (2022) 305–313.
LibreCat: /record/34213
DOI: 10.1007/s11740-022-01124-z

Clinching in In Situ CT—A Novel Validation Method for Mechanical Joining Processes
D. Köhler, R. Kupfer, J. Troschitz, M. Gude, in: The Minerals, Metals &; Materials Series, Springer International Publishing, Cham, 2022.
LibreCat: /record/34212
DOI: 10.1007/978-3-031-06212-4_75

Investigation of the influence of formed, non-rotationally symmetrical pin geometries and their effect on the joint quality of steel and aluminium sheets by direct pin pressing
D. Römisch, M. Kraus, M. Merklein, Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications 236 (2022) 1187–1202.
LibreCat: /record/34219
DOI: 10.1177/14644207221081408

Joining of CFRT/Steel Hybrid Parts via Direct Pressing of Cold Formed Non-Rotational Symmetric Pin Structures
J. Popp, D. Römisch, M. Merklein, D. Drummer, Applied Sciences 12 (2022).
LibreCat: /record/34223
DOI: 10.3390/app12104962

Joining Processes for Fibre-Reinforced Thermoplastics: Phenomena and Characterisation
J. Troschitz, B. Gröger, V. Würfel, R. Kupfer, M. Gude, Materials 15 (2022).
LibreCat: /record/34225
DOI: 10.3390/ma15155454

Über die Abgrenzung von Auflösungskonzepten in der industriellen Computertomografie
F. Binder, T. Hausotte, Tm - Technisches Messen 89 (2022) 20–24.
LibreCat: /record/34221
DOI: 10.1515/teme-2022-0065

Herausforderungen bei computertomografischen Untersuchungen von Fügeverbindungen
M. Busch, L. Butzhammer, T. Hausotte, Tm - Technisches Messen 89 (2022) 83–88.
LibreCat: /record/34220
DOI: 10.1515/teme-2022-0061

Knowledge and Data-Based Design and Dimensioning of Mechanical Joining Connections
C. Zirngibl, C. Sauer, B. Schleich, S. Wartzack, in: Volume 2: 42nd Computers and Information in Engineering Conference (CIE), American Society of Mechanical Engineers, 2022.
LibreCat: /record/34415
DOI: 10.1115/detc2022-89172

Estimation of Clinch Joint Characteristics Based on Limited Input Data Using Pre-Trained Metamodels
C. Zirngibl, B. Schleich, S. Wartzack, AI 3 (2022) 990–1006.
LibreCat: /record/34417
DOI: 10.3390/ai3040059

Characterisation of lateral offsets in clinch points with computed tomography and transient dynamic analysis
D. Köhler, B. Sadeghian, J. Troschitz, R. Kupfer, M. Gude, A. Brosius, Journal of Advanced Joining Processes 5 (2022) 100089.
LibreCat: /record/30626
DOI: 10.1016/j.jajp.2021.100089

Joining of continuous fiber reinforced thermoplastic/steel hybrid parts via undercutting pin structures and infrared heating
J. Popp, D. Drummer, Journal of Advanced Joining Processes 5 (2022) 100084.
LibreCat: /record/30625
DOI: 10.1016/j.jajp.2021.100084

Effect of the tool geometry on microstructure and geometrical features of clinched aluminum
L. Ewenz, M. Kuczyk, M. Zimmermann, Journal of Advanced Joining Processes 5 (2022).
LibreCat: /record/30624
DOI: 10.1016/j.jajp.2021.100091

Forming process induced material structure of fibre-reinforced thermoplastics - Experimental and numerical investigation of a bladder-assisted moulding process
B. Gröger, V. Würfel, A. Hornig, M. Gude, Journal of Advanced Joining Processes 5 (2022).
LibreCat: /record/30622
DOI: 10.1016/j.jajp.2022.100100

Investigation of the influence of the tumbling angle on a tumbling self-piercing riveting process
S. Wituschek, M. Lechner, Production Engineering (2022).
LibreCat: /record/30717
DOI: 10.1177/14644207221080068

Analysis of the interactions between joint and component properties during clinching
C. Steinfelder, J. Acksteiner, C. Guilleaume, A. Brosius, Production Engineering (2022).
LibreCat: /record/30629
DOI: 10.1007/s11740-021-01102-x

Application of an edge detection algorithm for surface determination in industrial X-ray computed tomography
M. Busch, T. Hausotte, Production Engineering (2022).
LibreCat: /record/30640
DOI: 10.1007/s11740-021-01100-z

Design of clinched joints on the basis of binding mechanisms
J. Kalich, U. Füssel, Production Engineering (2022).
LibreCat: /record/30628
DOI: 10.1007/s11740-022-01108-z

Observations on additive plasticity in the logarithmic strain space at excessive strains
J. Friedlein, J. Mergheim, P. Steinmann, International Journal of Solids and Structures 239–240 (2022) 111416.
LibreCat: /record/30627
DOI: 10.1016/j.ijsolstr.2021.111416

Corrosion Phenomena and Fatigue Behavior of Clinched Joints: Numerical and Experimental Investigations
S. Harzheim, L. Ewenz, M. Zimmermann, T. Wallmersperger, Journal of Advanced Joining Processes 6 (2022).
LibreCat: /record/34253
DOI: 10.1016/j.jajp.2022.100130

The Influence of Heat Treatment on the Microstructure, Surface Roughness and Shear Tensile Strength of AISI 304 Clinch Joints
A.T. Zeuner, L. Ewenz, J. Kalich, S. Schöne, U. Füssel, M. Zimmermann, Metals 12 (2022).
LibreCat: /record/34252
DOI: 10.3390/met12091514

Robustness Analysis of Pin Joining
D. Römisch, C. Zirngibl, B. Schleich, S. Wartzack, M. Merklein, Journal of Manufacturing and Materials Processing 6 (2022).
LibreCat: /record/34249
DOI: 10.3390/jmmp6050122

Characterisation of Fibre Bundle Deformation Behaviour—Test Rig, Results and Conclusions
A. Borowski, B. Gröger, R. Füßel, M. Gude, Journal of Manufacturing and Materials Processing 6 (2022).
LibreCat: /record/34255
DOI: 10.3390/jmmp6060146

Pin Extrusion for Mechanical Joining from Orbital Formed Tailored Blanks with Local Material Pre-Distribution
D. Römisch, A. Hetzel, S. Wituschek, M. Lechner, M. Merklein, Journal of Manufacturing and Materials Processing 6 (2022).
LibreCat: /record/34248
DOI: 10.3390/jmmp6060127