Kullmer, Gunter, Deborah Weiß, and Britta Schramm. “An Alternative and Robust Formulation of the Fatigue Crack Growth Rate Curve for Long Cracks.”https://doi.org/10.1016/j.engfracmech.2023.109826__Engineering Fracture Mechanics 296 (2024).https://doi.org/10.1016/j.engfracmech.2023.109826 .

Kullmer, Gunter, Deborah Weiß, and Britta Schramm. “Weiterentwicklung des Exponentialansatzes zur Beschreibung von Rissfortschrittskurven.”https://doi.org/10.48447/BR-2024-369__Deutscher Verband für Materialforschung und –prüfung e.V., 2024.https://doi.org/10.48447/BR-2024-369 .

Busch, Matthias, and Tino Hausotte. “Simulation-Based Investigation of the Metrological Interface Structural Resolution Capability of X-Ray Computed Tomography Scanners.”https://doi.org/10.5194/jsss-12-1-2023__Journal of Sensors and Sensor Systems 12, no. 1 (2023): 1–8.https://doi.org/10.5194/jsss-12-1-2023 .

Brosius, Alexander, Lars Ewenz, Richard Stephan, and Martina Zimmermann. “Anrisserkennung an Geclinchten Proben Während Einer Zyklischen Belastung Unter Nutzung Eines Scanning Laser Doppler Vibrometers.” In Tagung Werkstoffprüfung 2022, edited by Martina Zimmermann. Deutsche Gesellschaft für Materialkunde e.V. (DGM), 2023.

Ewenz, Lars, Martin Kuczyk, S.  Schöne, and Martina Zimmermann. “Ableitung Flacher Probengeometrien Zur Abbildung Mehraxialer Spannungszustände in Clinchverbindungen Unter Zyklischer Beanspruchung.” In Tagung Werkstoffprüfung 2022, edited by Martina Zimmermann. Deutsche Gesellschaft für Materialkunde e.V. (DGM), 2023.

Ewenz, Lars, R. Kühne, S. Schöne, and Martina Zimmermann. “Untersuchungen Zum Geometrie- Und Frequenzeinfluss Bei Der Ermittlung Zyklischer Kennwerte Geclinchter Überlappverbindungen.” In Tagung Werkstoffprüfung 2022, edited by Martina Zimmermann. Deutsche Gesellschaft für Materialkunde e.V. (DGM), 2023.

Wituschek, S., L. Elbel, and M. Lechner. “Versatile Self-Piercing Riveting with a Tumbling Superimposed Punch.”https://doi.org/10.21741/9781644902479-122__In Materials Research Proceedings. Materials Research Forum LLC, 2023.https://doi.org/10.21741/9781644902479-122 .

Köhler, Daniel, Robert Kupfer, Juliane Troschitz, and Maik Gude. “Comparison of Ex- and in-Situ Investigations of Clinched Single-Lap Shear Specimens.”https://doi.org/10.21741/9781644902417-20__In Materials Research Proceedings. Materials Research Forum LLC, 2023.https://doi.org/10.21741/9781644902417-20 .

Köhler, Daniel, Richard Stephan, Robert Kupfer, Juliane Troschitz, Alexander Brosius, and Maik Gude. “In-Situ Computed Tomography and Transient Dynamic Analysis of a Single-Lap Shear Test with a Composite-Metal Clinch Point.”https://doi.org/10.1007/978-3-031-18318-8_28__In Lecture Notes in Production Engineering. Cham: Springer International Publishing, 2023.https://doi.org/10.1007/978-3-031-18318-8_28 .

Böhnke, Max, Christian Roman Bielak, Johannes Friedlein, Mathias Bobbert, Julia Mergheim, Paul Steinmann, and Gerson Meschut. “A Calibration Method for Failure Modeling in Clinching Process Simulations.”https://doi.org/10.21741/9781644902417-34__In Materials Research Proceedings. Materials Research Forum LLC, 2023.https://doi.org/10.21741/9781644902417-34 .

Friedlein, Johannes, Christian Roman Bielak, Max Böhnke, Mathias Bobbert, Julia Mergheim, Paul Steinmann, and Gerson Meschut. “Influence of Plastic Orthotropy on Clinching of Sheet Metal.”https://doi.org/10.21741/9781644902417-17 __In Materials Research Proceedings. Materials Research Forum LLC, 2023.https://doi.org/10.21741/9781644902417-17  .

Bielak, Christian Roman, Max Böhnke, Mathias Bobbert, and Gerson Meschut. “Numerical Investigation of the Coupled Friction Behavior in the Clinching Process Chain.”https://doi.org/10.1007/978-3-031-41341-4_15__In Lecture Notes in Mechanical Engineering. Cham: Springer Nature Switzerland, 2023.https://doi.org/10.1007/978-3-031-41341-4_15 .

Butzhammer, Lorenz, Fabian Kappe, Gerson Meschut, and Tinohttps://doi.org/10.21741/9781644902417-48__Hausotte. “Dynamic Conformity Assessment for Joining Force Monitoring Using Bayes Filters.”https://doi.org/10.21741/9781644902417-48__In Materials Research Proceedings. Materials Research Forum LLC, 2023.https://doi.org/10.21741/9781644902417-48 .

Wituschek, Simon, Fabian Kappe, Gerson Meschut, and Michael Lechner. “Combination of Versatile Self-Piercing Riveting Processes.”https://doi.org/10.21741/9781644902417-16__In Materials Research Proceedings. Materials Research Forum LLC, 2023.https://doi.org/10.21741/9781644902417-16 .

Weiß, Deborah, Tobias Duffe, Moritz Buczek, Gunter Kullmer, and Britta Schramm. “Bruchmechanische Untersuchung des Dualphasenstahls HX unter Temperatureinfluss.”https://doi.org/10.48447/WP-2023-244__Deutscher Verband für Materialforschung und -prüfung e.V., 2023.https://doi.org/10.48447/WP-2023-244 .

Neuser, Moritz, Fabian Kappe, Jakob Ostermeier, Jan Tobias Krüger, Mathias Bobbert, Gerson Meschut, Mirko Schaper, and Olexandr Grydin. “Mechanical Properties and Joinability of AlSi9 Alloy Manufactured by TwinRoll Casting.”https://doi.org/10.1002/adem.202200874__Advanced Engineering Materials 24, no. 10 (2022).https://doi.org/10.1002/adem.202200874 .

Friedlein, Johannes, Julia Mergheim, and Paul Steinmann. “Influence of Kinematic Hardening on Clinch Joining of Dual-Phase Steel HX Sheet Metal.”https://doi.org/10.1007/978-3-031-06212-4_31__In The Minerals, Metals &;amp; Materials Series. Cham: Springer International Publishing, 2022.https://doi.org/10.1007/978-3-031-06212-4_31 .

Ewenz, L., Christian Roman Bielak, Mortaza Otroshi, Mathias Bobbert, Gerson Meschut, and M. Zimmermann. “Numerical and Experimental Identification of Fatigue Crack Initiation Sites in Clinched Joints.”https://doi.org/10.1007/s11740-022-01124-z__Production Engineering 16, no. 2–3 (2022): 305–13.https://doi.org/10.1007/s11740-022-01124-z .

Köhler, Daniel, Robert Kupfer, Juliane Troschitz, and Maik Gude. “Clinching in In Situ CT—A Novel Validation Method for Mechanical Joining Processes.”https://doi.org/10.1007/978-3-031-06212-4_75__In The Minerals, Metals &; Materials Series. Cham: Springer International Publishing, 2022.https://doi.org/10.1007/978-3-031-06212-4_75 .

Römisch, David, Martin Kraus, and Marion Merklein. “Investigation of the Influence of Formed, Non-Rotationally Symmetrical Pin Geometries and Their Effect on the Joint Quality of Steel and Aluminium Sheets by Direct Pin Pressing.”https://doi.org/10.1177/14644207221081408__Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications 236, no. 6 (2022): 1187–1202.https://doi.org/10.1177/14644207221081408 .

Popp, Julian, David Römisch, Marion Merklein, and Dietmar Drummer. “Joining of CFRT/Steel Hybrid Parts via Direct Pressing of Cold Formed Non-Rotational Symmetric Pin Structures.”https://doi.org/10.3390/app12104962__Applied Sciences 12, no. 10 (2022).https://doi.org/10.3390/app12104962 .

Troschitz, Juliane, Benjamin Gröger, Veit Würfel, Robert Kupfer, and Maik Gude. “Joining Processes for Fibre-Reinforced Thermoplastics: Phenomena and Characterisation.”https://doi.org/10.3390/ma15155454__Materials 15, no. 15 (2022).https://doi.org/10.3390/ma15155454 .

Binder, Felix, and Tino Hausotte. “Über Die Abgrenzung von Auflösungskonzepten in Der Industriellen Computertomografie.”https://doi.org/10.1515/teme-2022-0065__Tm - Technisches Messen 89, no.https://doi.org/10.1515/teme-2022-0065__(2022): 20–24.https://doi.org/10.1515/teme-2022-0065 .

Busch, Matthias, Lorenz Butzhammer, and Tino Hausotte. “Herausforderungen Bei Computertomografischen Untersuchungen von Fügeverbindungen.”https://doi.org/10.1515/teme-2022-0061__Tm - Technisches Messen 89, no.https://doi.org/10.1515/teme-2022-0061__(2022): 83–88.https://doi.org/10.1515/teme-2022-0061 .

Zirngibl, Christoph, Christopher Sauer, Benjamin Schleich, and Sandro Wartzack. “Knowledge and Data-Based Design and Dimensioning of Mechanical Joining Connections.”https://doi.org/10.1115/detc2022-89172__In Volume 2: 42nd Computers and Information in Engineering Conference (CIE). American Society of Mechanical Engineers, 2022.https://doi.org/10.1115/detc2022-89172 .

Zirngibl, Christoph, Benjamin Schleich, and Sandro Wartzack. “Estimation of Clinch Joint Characteristics Based on Limited Input Data Using Pre-Trained Metamodels.”https://doi.org/10.3390/ai3040059__AI 3, no. 4 (2022): 990–1006.https://doi.org/10.3390/ai3040059 .

Köhler, D., B. Sadeghian, J. Troschitz, R. Kupfer, M. Gude, and A. Brosius. “Characterisation of Lateral Offsets in Clinch Points with Computed Tomography and Transient Dynamic Analysis.”https://doi.org/10.1016/j.jajp.2021.100089__Journal of Advanced Joining Processes 5 (2022): 100089.https://doi.org/10.1016/j.jajp.2021.100089 .

Popp, J., and D. Drummer. “Joining of Continuous Fiber Reinforced Thermoplastic/Steel Hybrid Parts via Undercutting Pin Structures and Infrared Heating.”https://doi.org/10.1016/j.jajp.2021.100084__Journal of Advanced Joining Processes 5 (2022): 100084.https://doi.org/10.1016/j.jajp.2021.100084 .

Ewenz, L., M. Kuczyk, and M. Zimmermann. “Effect of the Tool Geometry on Microstructure and Geometrical Features of Clinched Aluminum.”https://doi.org/10.1016/j.jajp.2021.100091__Journal of Advanced Joining Processes 5 (2022).https://doi.org/10.1016/j.jajp.2021.100091 .

Gröger, B., V. Würfel, A. Hornig, and M. Gude. “Forming Process Induced Material Structure of Fibre-Reinforced Thermoplastics - Experimental and Numerical Investigation of a Bladder-Assisted Moulding Process.”https://doi.org/10.1016/j.jajp.2022.100100__Journal of Advanced Joining Processes 5 (2022).https://doi.org/10.1016/j.jajp.2022.100100 .

Wituschek, S., and M. Lechner. “Investigation of the Influence of the Tumbling Angle on a Tumbling Self-Piercing Riveting Process.”https://doi.org/10.1177/14644207221080068__Production Engineering, 2022.https://doi.org/10.1177/14644207221080068 .

Steinfelder, C., J. Acksteiner, C. Guilleaume, and A. Brosius. “Analysis of the Interactions between Joint and Component Properties during Clinching.”https://doi.org/10.1007/s11740-021-01102-x__Production Engineering, 2022.https://doi.org/10.1007/s11740-021-01102-x .

Busch, M., and T. Hausotte. “Application of an Edge Detection Algorithm for Surface Determination in Industrial X-Ray Computed Tomography.”https://doi.org/10.1007/s11740-021-01100-z__Production Engineering, 2022.https://doi.org/10.1007/s11740-021-01100-z .

Kalich, J., and U. Füssel. “Design of Clinched Joints on the Basis of Binding Mechanisms.”https://doi.org/10.1007/s11740-022-01108-z__Production Engineering, 2022.https://doi.org/10.1007/s11740-022-01108-z .

Friedlein, J., J. Mergheim, and P. Steinmann. “Observations on Additive Plasticity in the Logarithmic Strain Space at Excessive Strains.”https://doi.org/10.1016/j.ijsolstr.2021.111416__International Journal of Solids and Structures 239–240 (2022): 111416.https://doi.org/10.1016/j.ijsolstr.2021.111416 .

Harzheim, Sven, Lars Ewenz, Martina Zimmermann, and Thomas Wallmersperger. “Corrosion Phenomena and Fatigue Behavior of Clinched Joints: Numerical and Experimental Investigations.”https://doi.org/10.1016/j.jajp.2022.100130__Journal of Advanced Joining Processes 6 (2022).https://doi.org/10.1016/j.jajp.2022.100130 .

Zeuner, André Till, Lars Ewenz, Jan Kalich, Sebastian Schöne, Uwe Füssel, and Martina Zimmermann. “The Influence of Heat Treatment on the Microstructure, Surface Roughness and Shear Tensile Strength of AISI 304 Clinch Joints.”https://doi.org/10.3390/met12091514__Metals 12, no. 9 (2022).https://doi.org/10.3390/met12091514 .

Römisch, David, Christoph Zirngibl, Benjamin Schleich, Sandro Wartzack, and Marion Merklein. “Robustness Analysis of Pin Joining.”https://doi.org/10.3390/jmmp6050122__Journal of Manufacturing and Materials Processing 6, no. 5 (2022).https://doi.org/10.3390/jmmp6050122 .

Borowski, Andreas, Benjamin Gröger, René Füßel, and Maik Gude. “Characterisation of Fibre Bundle Deformation Behaviour—Test Rig, Results and Conclusions.”https://doi.org/10.3390/jmmp6060146__Journal of Manufacturing and Materials Processing 6, no. 6 (2022).https://doi.org/10.3390/jmmp6060146 .

Römisch, David, Andreas Hetzel, Simon Wituschek, Michael Lechner, and Marion Merklein. “Pin Extrusion for Mechanical Joining from Orbital Formed Tailored Blanks with Local Material Pre-Distribution.”https://doi.org/10.3390/jmmp6060127__Journal of Manufacturing and Materials Processing 6, no. 6 (2022).https://doi.org/10.3390/jmmp6060127 .

Gröger, Benjamin, David Römisch, Martin Kraus, Juliane Troschitz, René Füßel, Marion Merklein, and Maik Gude. “Warmforming Flow Pressing Characteristics of Continuous Fibre Reinforced Thermoplastic Composites.”https://doi.org/10.3390/polym14225039__Polymers 14, no. 22 (2022).https://doi.org/10.3390/polym14225039 .

Gerritzen, Johannes, Andreas Hornig, Benjamin Gröger, and Maik Gude. “A Data Driven Modelling Approach for the Strain Rate Dependent 3D Shear Deformation and Failure of Thermoplastic Fibre Reinforced Composites: Experimental Characterisation and Deriving Modelling Parameters.”https://doi.org/10.3390/jcs6100318__Journal of Composites Science 6, no. 10 (2022).https://doi.org/10.3390/jcs6100318 .

Schaude, Janik, and Tino Hausotte. “Atomic Force Microscope with an Adjustable Probe Direction and Integrated Sensing and Actuation.”https://doi.org/10.1007/s41871-022-00143-9__Nanomanufacturing and Metrology 5, no. 2 (2022): 139–48.https://doi.org/10.1007/s41871-022-00143-9 .

Shi, Yuhao, Sven Harzheim, Martin Hofmann, and Thomas Wallmersperger. “A Damage Model for Corrosion Fatigue Due to Hydrogen Embrittlement.”https://doi.org/10.1007/978-3-030-97675-0_9__In Material Modeling and Structural Mechanics. Cham: Springer International Publishing, 2022.https://doi.org/10.1007/978-3-030-97675-0_9 .

Kalich, Jan, Marcus Matzke, Wolfgang Pfeiffer, Stephan Schlegel, Ludwig Kornhuber, and Uwe Füssel. “Long-Term Behavior of Clinched Electrical Contacts.”https://doi.org/10.3390/met12101651__Metals 12, no. 10 (2022).https://doi.org/10.3390/met12101651 .

Gröger, Benjamin, Jingjing Wang, Tim Bätzel, Andreas Hornig, and Maik Gude. “Modelling and Simulation Strategies for Fluid–Structure-Interactions of Highly Viscous Thermoplastic Melt and Single Fibres—A Numerical Study.”https://doi.org/10.3390/ma15207241__Materials 15, no. 20 (2022).https://doi.org/10.3390/ma15207241 .

Harzheim, Sven, Martin Hofmann, and Thomas Wallmersperger. “Comparison of Two Mesh-Moving Techniques for Finite Element Simulations of Galvanic Corrosion.”https://doi.org/10.1007/s00707-022-03326-z__Acta Mechanica 233, no. 11 (2022): 4427–39.https://doi.org/10.1007/s00707-022-03326-z .

Füssel, Uwe, Stephan Schlegel, Gregor Reschke, and Jan Kalich. “Electrical Contacting of Aluminum Bus Bars Using Clinching and Functional Elements.”https://doi.org/10.3390/engproc2022026005__In SFU/ICAFT 2022. MDPI, 2022.https://doi.org/10.3390/engproc2022026005 .

Köhler, Daniel, Richard Stephan, Robert Kupfer, Juliane Troschitz, Alexander Brosius, and Maik Gude. “Investigations on Combined in Situ CT and Acoustic Analysis during Clinching.”https://doi.org/10.4028/p-32330d__In Key Engineering Materials, 926:1489–97. Trans Tech Publications, Ltd., 2022.https://doi.org/10.4028/p-32330d .

Zirngibl, Christoph, Benjamin Schleich, and Sandro Wartzack. “Robust Estimation of Clinch Joint Characteristics Based on Data-Driven Methods.”https://doi.org/10.1007/s00170-022-10441-7__The International Journal of Advanced Manufacturing Technology, 2022.https://doi.org/10.1007/s00170-022-10441-7 .

Harzheim, Sven, Martin Hofmann, and Thomas Wallmersperger. “Numerical Fatigue Life Prediction of Corroded and Non-Corroded Clinched Joints.”https://doi.org/10.1080/15376494.2022.2140233__Mechanics of Advanced Materials and Structures, 2022, 1–6.https://doi.org/10.1080/15376494.2022.2140233 .

Stephan, Richard, and Alexander Brosius. “Experimental Measurement Method and Evaluation of an Analytical Approach for Sound Conduction through Multiple Clinched Sheets.”https://doi.org/10.3390/engproc2022026025__In The 28th Saxon Conference on Forming Technology SFU and the 7th International Conference on Accuracy in Forming Technology ICAFT. MDPI, 2022.https://doi.org/10.3390/engproc2022026025 .

Römisch, David, and Marion Merklein. “Experimental and Numerical Analysis of Cold Formed Multi Pin Structures Using a Multi-Acting Tool Design,” 2022.

Wituschek, Simon, and Michael Lechner. “Versatile Tool Design for a Tumbling Self-Piercing Riveting Process,” 2022.

Busch, Matthias, Daniel  Köhler, Tino  Hausotte, Robert  Kupfer, Juliane  Troschitz, and Maik  Gude. “Approach to Determine the Characteristic Dimensions of Clinched Joints by Industrial X-Ray Computed Tomography,” 2022.

Butzhammer, Lorenz, Andreas Michael Müller, and Tino Hausotte. “Calibration of 3D Scan Trajectories for an Industrial Computed Tomography Setup with 6-DOF Object Manipulator System Using a Single Sphere.”https://doi.org/10.1088/1361-6501/ac9856__Measurement Science and Technology 34, no. 1 (2022).https://doi.org/10.1088/1361-6501/ac9856 .

Böhnke, Max, Eduard Unruh, Stanislaw Sell, Mathias Bobbert, David Hein, and Gerson Meschut. “Functionality Study of an Optical Measurement Concept for Local Force Signal Determination in High Strain Rate Tensile Tests.”https://doi.org/10.4028/p-wpuzyw__Key Engineering Materials 926 (2022): 1564–72.https://doi.org/10.4028/p-wpuzyw .

Böhnke, Max, Christian Roman Bielak, Mathias Bobbert, and Gerson Meschut. “Development of a Modified Punch Test for Investigating the Failure Behavior in Sheet Metal Materials.”https://doi.org/10.1007/978-3-031-06212-4_52__In The Minerals, Metals &;amp; Materials Series. Cham: Springer International Publishing, 2022.https://doi.org/10.1007/978-3-031-06212-4_52 .

Böhnke, Max, Christian Roman Bielak, Mathias Bobbert, and Gerson Meschut. “Experimental and Numerical Investigation of the Influence of Multiaxial Loading Conditions on the Failure Behavior of Clinched Joints.”https://doi.org/10.1177/14644207221145886__Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 2022.https://doi.org/10.1177/14644207221145886 .

Weiß, Deborah, and Britta Schramm. “Fracture Mechanical Investigation of Preformed Metal Sheets Using a Novel CC-Specimen.”https://doi.org/10.1016/j.prostr.2022.12.111__In Procedia Structural Integrity, 42:879–85. Elsevier BV, 2022.https://doi.org/10.1016/j.prostr.2022.12.111 .

Meschut, Gerson, M. Merklein, A. Brosius, D. Drummer, L. Fratini, U. Füssel, M. Gude, et al. “Review on Mechanical Joining by Plastic Deformation.”https://doi.org/10.1016/j.jajp.2022.100113__Journal of Advanced Joining Processes 5 (2022).https://doi.org/10.1016/j.jajp.2022.100113 .

Wituschek, Simon, Fabian Kappe, Gerson Meschut, and Michael Lechner. “Geometric and Mechanical Joint Characterization of Conventionally  and Tumbled Self-Piercing Riveting Joints.”https://doi.org/10.1177/14644207221135400__Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 2022.https://doi.org/10.1177/14644207221135400 .

Neuser, Moritz, Fabian Kappe, Jakob Ostermeier, Jan Tobias Krüger, Mathias Bobbert, Gerson Meschut, Mirko Schaper, and Olexandr Grydin. “Mechanical Properties and Joinability of AlSi9 Alloy Manufactured by TwinRoll Casting.”https://doi.org/10.1002/adem.202200874__Advanced Engineering Materials 24, no. 10 (2022).https://doi.org/10.1002/adem.202200874 .

Oesterwinter, Annika, Christian Wischer, and Werner Homberg. “Identification of Requirements for FE Modeling of an Adaptive Joining Technology Employing Friction-Spun Joint Connectors (FSJC).”https://doi.org/10.3390/met12050869__Metals 12, no. 5 (2022).https://doi.org/10.3390/met12050869 .

Joy, Tintu David, Deborah Weiß, Britta Schramm, and Gunter Kullmer. “Further Development of 3D Crack Growth Simulation Program to Include Contact Loading Situations.”https://doi.org/10.3390/app12157557__Applied Sciences 12, no. 15 (2022).https://doi.org/10.3390/app12157557 .

Weiß, Deborah, Britta Schramm, and Gunter Kullmer. “Influence of Plane Mixed-Mode Loading on the Kinking Angle of Clinchable Metal Sheets.”https://doi.org/10.1016/j.prostr.2022.03.082__In Procedia Structural Integrity, 39:139–47. Elsevier BV, 2022.https://doi.org/10.1016/j.prostr.2022.03.082 .

Schramm, Britta, Sven Harzheim, Deborah Weiß, Tintu David Joy, Martin Hofmann, Julia Mergheim, and Thomas Wallmersperger. “A Review on the Modeling of the Clinching Process Chain - Part III: Operational Phase.”https://doi.org/10.1016/j.jajp.2022.100135__Journal of Advanced Joining Processes, 2022.https://doi.org/10.1016/j.jajp.2022.100135 .

Kullmer, Gunter, Deborah Weiß, and Britta Schramm. “Development of a Method for the Separate Measurement of the Growth of Internal Crack Tips by Means of the Potential Drop Method.”https://doi.org/10.1016/j.engfracmech.2022.108899__Engineering Fracture Mechanics, 2022.https://doi.org/10.1016/j.engfracmech.2022.108899 .

Kappe, Fabian, Simon Wituschek, Mathias Bobbert, Michael Lechner, and Gerson Meschut. “Joining of Multi-Material Structures Using a Versatile Self-Piercing Riveting Process.”https://doi.org/10.1007/s11740-022-01151-w__Production Engineering, 2022.https://doi.org/10.1007/s11740-022-01151-w .

Zirngibl, Christoph, Patricia Kügler, Julian Popp, Christian Roman Bielak, Mathias Bobbert, Dietmar Drummer, Gerson Meschut, Sandro Wartzack, and Benjamin Schleich. “Provision of Cross-Domain Knowledge in Mechanical Joining Using Ontologies.”https://doi.org/10.1007/s11740-022-01117-y__Production Engineering, 2022.https://doi.org/10.1007/s11740-022-01117-y .

Kappe, Fabian, Simon Wituschek, Vincenzo de Pascalis, Mathias Bobbert, Michael Lechner, and Gerson Meschut. “Numerical Investigation of the Influence of a Movable Die Base on Joint Formation in Semi-Tubular Self-Piercing Riveting.”https://doi.org/10.1007/978-3-031-18130-6_10__In Materials Design and Applications IV. Cham: Springer International Publishing, 2022.https://doi.org/10.1007/978-3-031-18130-6_10 .

Kappe, Fabian, Christoph Zirngibl, Benjamin Schleich, Mathias Bobbert, Sandro Wartzack, and Gerson Meschut. “Determining the Influence of Different Process Parameters on the Versatile Self-Piercing Riveting Process Using Numerical Methods.”https://doi.org/10.1016/j.jmapro.2022.11.019__Journal of Manufacturing Processes 84 (2022): 1438–48.https://doi.org/10.1016/j.jmapro.2022.11.019 .

Kappe, Fabian, Luca Schadow, Mathias Bobbert, and Gerson Meschut. “Increasing Flexibility of Self-Piercing Riveting by Reducing Tool–Geometry Combinations Using Cluster Analysis in the Application of Multi-Material Design.”https://doi.org/10.1177/14644207211070992__Proceedings of the Institution of Mechanical Engineers Part L Journal of Materials Design and Applications, 2022.https://doi.org/10.1177/14644207211070992 .

Kappe, Fabian, Simon Wituschek, Mathias Bobbert, and Gerson Meschut. “Determining the Properties of Multirange Semitubular Selfpiercing Riveted Joints.”https://doi.org/10.1007/s11740-022-01105-2__Production Engineering, 2022.https://doi.org/10.1007/s11740-022-01105-2 .

Schramm, Britta, and Deborah Weiß. “Fracture Mechanical Evaluation of the Material HX.”https://doi.org/10.1515/mt-2022-0191__Materials Testing 64, no. 10 (2022): 1437–49.https://doi.org/10.1515/mt-2022-0191 .

Bielak, Christian Roman, Max Böhnke, Mathias Bobbert, and Gerson Meschut. “Development of a Numerical 3D Model for Analyzing Clinched Joints in Versatile Process Chains.”https://doi.org/10.1007/978-3-031-06212-4_15__In The Minerals, Metals &;amp; Materials Series. Cham: Springer International Publishing, 2022.https://doi.org/10.1007/978-3-031-06212-4_15 .

Bielak, Christian Roman, Max Böhnke, Mathias Bobbert, and Gerson Meschut. “Numerical Investigation of a Friction  Test to Determine the Friction  Coefficients for the Clinching Process.”https://doi.org/10.1177/14644207221093468__Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 2022.https://doi.org/10.1177/14644207221093468 .

Schramm, Britta, Sven Martin, Christian Steinfelder, Christian Roman Bielak, Alexander Brosius, Gerson Meschut, Thomas Tröster, Thomas Wallmersperger, and Julia Mergheim. “A Review on the Modeling of the Clinching Process Chain - Part I: Design Phase.”https://doi.org/10.1016/j.jajp.2022.100133__Journal of Advanced Joining Processes 6 (2022).https://doi.org/10.1016/j.jajp.2022.100133 .

Schramm, Britta, Johannes Friedlein, Benjamin Gröger, Christian Roman Bielak, Mathias Bobbert, Maik Gude, Gerson Meschut, Thomas Wallmersperger, and Julia Mergheim. “A Review on the Modeling of the Clinching Process Chain - Part II: Joining Process.”https://doi.org/10.1016/j.jajp.2022.100134__Journal of Advanced Joining Processes, 2022.https://doi.org/10.1016/j.jajp.2022.100134 .

Martin, Sven, Christian Roman Bielak, Mathias Bobbert, Thomas Tröster, and Gerson Meschut. “Numerical Investigation of the Clinched Joint Loadings Considering the Initial Pre-Strain in the Joining Area.”https://doi.org/10.1007/s11740-021-01103-w__Production Engineering, 2022.https://doi.org/10.1007/s11740-021-01103-w .

Martin, Sven, Kristijan Kurtusic, and Thomas Tröster. “Influence of the Surrounding Sheet Geometry on a Clinched Joint.”https://doi.org/Â  https://doi.org/10.4028/p-09md1c__Key Engineering Materials 927 (2022).https://doi.org/Â  https://doi.org/10.4028/p-09md1c .

Köhler, Daniel, Richard Stephan, Robert Kupfer, Juliane Troschitz, Alexander Brosius, and Maik Gude. “Investigations on Combined &;lt;I&;gt;In Situ&;lt;/I&;gt; CT and Acoustic Analysis during Clinching.”https://doi.org/10.4028/p-32330d__Key Engineering Materials 926 (2022): 1489–97.https://doi.org/10.4028/p-32330d .

Busch, Matthias, Daniel Köhler, Tino Hausotte, Robert Kupfer, Juliane Troschitz, and Maik Gude. “Approach to Determine the Characteristic Dimensions of Clinched Joints by Industrial X-Ray Computed Tomography.”https://doi.org/10.58286/27519__E-Journal of Nondestructive Testing 27, no. 12 (2022).https://doi.org/10.58286/27519 .

Köhler, Daniel, Robert Kupfer, Juliane Troschitz, and Maik Gude. “Untersuchung zum Einfluss radioopaker Zwischenschichten bei der in-situ CT geclinchter Verbindungen.” In Tagungsband zur Werkstoffprüfung 2022, edited by Martina Zimmermann. Dresden, 2022.

Köhler, Daniel, Robert Kupfer, Juliane Troschitz, and Maik Gude. “Clinching in In Situ CT—A Novel Validation Method for Mechanical Joining Processes.”https://doi.org/10.1007/978-3-031-06212-4_75__In The Minerals, Metals &;amp; Materials Series. Cham: Springer International Publishing, 2022.https://doi.org/10.1007/978-3-031-06212-4_75 .

Neuser, Moritz, Max Böhnke, Olexandr Grydin, Mathias Bobbert, Mirko Schaper, and Gerson Meschut. “Influence of Heat Treatment on the Suitability for Clinching of the Aluminium Casting Alloy AlSi9.”https://doi.org/10.1177/14644207221075838__Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 2022.https://doi.org/10.1177/14644207221075838 .

Neuser, Moritz, Olexandr Grydin, Y. Frolov, and Mirko Schaper. “Influence of Solidification Rates and Heat Treatment on the Mechanical Performance and Joinability of the Cast Aluminium Alloy AlSi10Mg.”https://doi.org/10.1007/s11740-022-01106-1__Production Engineering, 2022.https://doi.org/10.1007/s11740-022-01106-1 .

Kupfer, Robert, Daniel Köhler, David Römisch, Simon Wituschek, Lars Ewenz, Jan Kalich, Deborah Weiß, et al. “Clinching of Aluminum Materials – Methods for the Continuous Characterization of Process, Microstructure and Properties.”https://doi.org/10.1016/j.jajp.2022.100108__Journal of Advanced Joining Processes 5 (2022).https://doi.org/10.1016/j.jajp.2022.100108 .

Grydin, Olexandr, Dag Mortensen, Moritz Neuser, Dag Lindholm, Hallvard G. Fjaer, and Mirko Schaper. “Numerical and Experimental Investigation of Heat Transfer in the Solidification-Deformation Zone During Twin-Roll Casting of Aluminum Strips.”https://doi.org/10.1007/978-3-030-92529-1_96__In Light Metals 2022. Cham: Springer International Publishing, 2022.https://doi.org/10.1007/978-3-030-92529-1_96 .

Kupfer, Robert, Daniel Köhler, David Römisch, Simon Wituschek, Lars Ewenz, Jan Kalich, Deborah Weiß, et al. “Clinching of Aluminum Materials – Methods for the Continuous Characterization of Process, Microstructure and Properties.”https://doi.org/10.1016/j.jajp.2022.100108__Journal of Advanced Joining Processes 5 (2022).https://doi.org/10.1016/j.jajp.2022.100108 .

Friedlein, J., S. Wituschek, M. Lechner, J. Mergheim, and P. Steinmann. “Inverse Parameter Identification of an Anisotropic Plasticity Model for Sheet Metal.”https://doi.org/10.1088/1757-899X/1157/1/012004__IOP Conference Series: Materials Science and Engineering 1157 (2021): 012004.https://doi.org/10.1088/1757-899X/1157/1/012004 .

Popp, J., M. Wolf, T. Mattner, and D. Drummer. “Energy Direction in Ultrasonic Impregnation of Continuous Fiber-Reinforced Thermoplastics.”https://doi.org/10.3390/jcs5090239__Journal of Composites Science 5 (2021): 239.https://doi.org/10.3390/jcs5090239 .

Kalich, J., and U. Füssel. “Influence of the Production Process on the Binding Mechanism of Clinched Aluminum Steel Mixed Compounds.”https://doi.org/10.3390/jmmp5040105__Journal of Manufacturing and Materials Processing 5 (2021): 105.https://doi.org/10.3390/jmmp5040105 .

Pivovarov, D., J. Mergheim, K. Willner, and P. Steinmann. “Stochastic Local FEM for Computational Homogenization of Heterogeneous Materials Exhibiting Large Plastic Deformations.”https://doi.org/10.1007/s00466-021-02099-x__Computational Mechanics, 2021.https://doi.org/10.1007/s00466-021-02099-x .

Friedlein, J., J. Mergheim, and P. Steinmann. “Anisotropic Plasticitydamage Material Model for Sheet Metal — Regularised Single Surface Formulation.”https://doi.org/10.1002/pamm.202100068__PAMM 21 (2021).https://doi.org/10.1002/pamm.202100068 .

Bielak, Christian Roman, Max Böhnke, Mathias Bobbert, and Gerson Meschut. “Further Development of a Numerical Method for Analyzing the Load Capacity of Clinched Joints in Versatile Process Chains.”https://doi.org/10.25518/esaform21.4298__ESAFORM 2021, n.d.https://doi.org/10.25518/esaform21.4298 .

Römisch, D., C. Zirngibl, B. Schleich, S. Wartzack, and M. Merklein. “Data-Driven Analysis of Cold-Formed Pin Structure Characteristics in the Context of Versatile Joining Processes.”https://doi.org/10.1088/1757-899X/1157/1/012077__IOP Conference Series: Materials Science and Engineering 1157 (2021): 012077.https://doi.org/10.1088/1757-899X/1157/1/012077 .

Steinfelder, C., J. Kalich, A. Brosius, and U. Füssel. “Numerical and Experimental Investigation of the Transmission Moment of Clinching Points.”https://doi.org/10.1088/1757-899x/1157/1/012003__IOP Conference Series: Materials Science and Engineering 1157 (2021): 012003.https://doi.org/10.1088/1757-899x/1157/1/012003 .

Popp, J., T. Kleffel, D. Römisch, T. Papke, M. Merklein, and D. Drummer. “Fiber Orientation Mechanism of Continuous Fiber Reinforced Thermoplastics Hybrid Parts Joined with Metallic Pins.”https://doi.org/10.1007/s10443-021-09892-0__Applied Composite Materials 28 (2021): 951–972.https://doi.org/10.1007/s10443-021-09892-0 .

Gröger, B., J. Troschitz, J. Vorderbrüggen, C. Vogel, R. Kupfer, G. Meschut, and M. Gude. “Clinching of Thermoplastic Composites and Metals—A Comparison of Three Novel Joining Technologies.”https://doi.org/10.3390/ma14092286X__Materials 14 (2021): 2286.https://doi.org/10.3390/ma14092286X .