Kraus, M., et al. “Mechanical Joining without Auxiliary Element by Cold Formed Pins for Multi-Material-Systems.”10.1063/1.5112570__AIP Conference Proceedings, vol. 2113, 2019, p. 050006, doi:10.1063/1.5112570.
LibreCat: /record/30716
DOI: 10.1063/1.5112570

Bielak, Christian Roman, et al. “Numerical Analysis of the Robustness of Clinching Process Considering the Pre-Forming of the Parts .”https://doi.org/10.1016/j.jajp.2020.100038__Journal of Advanced Joining Processes. , Elsevier, 2020, doi:https://doi.org/10.1016/j.jajp.2020.100038.
LibreCat: /record/20678
DOI: https://doi.org/10.1016/j.jajp.2020.100038

Steinfelder, C., and A. Brosius. “A New Approach for the Evaluation of Component and Joint Loads Based on Load Path Analysis.”10.1007/978-3-662-62138-7_14__Lecture Notes in Production Engineering, 2020, pp. 134–41, doi:10.1007/978-3-662-62138-7_14.
LibreCat: /record/30706
DOI: 10.1007/978-3-662-62138-7_14

Böhm, H., et al. “Characterization and Numerical Modelling of Through-Thickness Metallic-Pin-Reinforced Fibre/Thermoplastic Composites under Bending Loading.”10.3390/jcs4040188__Journal of Composites Science, vol. 4, 2020, p. 188, doi:10.3390/jcs4040188.
LibreCat: /record/30704
DOI: 10.3390/jcs4040188

Sadeghian, B., et al. “Investigation of Clinched Joints – A Finite Element Simulation of a Non-Destructive Approach.”10.1007/978-3-662-62138-7_12__Lecture Notes in Production Engineering, 2020, pp. 116–24, doi:10.1007/978-3-662-62138-7_12.
LibreCat: /record/30707
DOI: 10.1007/978-3-662-62138-7_12

Ewenz, L., et al. “Untersuchungen Zum Einfluss von Geometrieparametern Bei Artgleichen Al-Clinchverbindungen Auf Das Ermüdungsverhalten Im Bereich Hoher Bis Sehr Hoher Lastspielzahlen.”10.48447/WP-2020-039__Tagung Werkstoffprüfung 2020. Werkstoffe Und Bauteile Auf Dem Prüfstand. Prüftechnik - Kennwertermit, 2020, doi:10.48447/WP-2020-039.
LibreCat: /record/30711
DOI: 10.48447/WP-2020-039

Grydin, Olexandr, et al. “Influence of Nozzle Shape on Near-Surface Segregation Formation During Twin-Roll Casting of Aluminum Strips.”10.1007/978-3-030-36408-3_141__Light Metals 2020, 2020, pp. 1039–44, doi:10.1007/978-3-030-36408-3_141.
LibreCat: /record/24575
DOI: 10.1007/978-3-030-36408-3_141

Köhler, D., et al. “Experimental and Numerical Studies on the Deformation of a Flexible Wire in an Injection Moulding Process.”10.1016/j.promfg.2020.04.288__Procedia Manufacturing, vol. 47, 2020, pp. 940–47, doi:10.1016/j.promfg.2020.04.288.
LibreCat: /record/30712
DOI: 10.1016/j.promfg.2020.04.288

Zirngibl, C., et al. “Potentiale Datengestützter Methoden Zur Gestaltung Und Optimierung Mechanischer Fügeverbindungen.”10.35199/dfx2020.8__Proceedings of the 31st Symposium Design for X (D), 2020, doi:10.35199/dfx2020.8.
LibreCat: /record/30710
DOI: 10.35199/dfx2020.8

Köhler, D., et al. “Clinching in In-Situ CT—A Numerical Study on Suitable Tool Materials.”10.1016/j.jajp.2020.100034__Journal of Advanced Joining Processes, vol. 2, 2020, p. 100034, doi:10.1016/j.jajp.2020.100034.
LibreCat: /record/30709
DOI: 10.1016/j.jajp.2020.100034

Kraus, M., and M. Merklein. “Potential of Joining Dissimilar Materials by Cold Formed Pin-Structures.”10.1016/j.jmatprotec.2020.116697__Journal of Materials Processing Technology, vol. 283, 2020, p. 116697, doi:10.1016/j.jmatprotec.2020.116697.
LibreCat: /record/30703
DOI: 10.1016/j.jmatprotec.2020.116697

Bielak, Christian Roman, et al. Development of a numerical method for analyzing the robustness of clinching in versatile process chains.
LibreCat: /record/20344

Wituschek, S., et al. “Test Method for Friction Characterization of Rivets.”10.4028/www.scientific.net/ddf.404.132__Defect and Diffusion Forum, vol. 404, 2020, pp. 132–37, doi:10.4028/www.scientific.net/ddf.404.132.
LibreCat: /record/30721
DOI: 10.4028/www.scientific.net/ddf.404.132

Weiß, Deborah, et al. Development of a Special Specimen Geometry for the Experimental Determination of Fracture Mechanical Parameters of Clinchable Metal Sheets. Elsevier, 2020, pp. 2335–41, doi:10.1016/j.prostr.2020.11.081.
LibreCat: /record/23980
DOI: 10.1016/j.prostr.2020.11.081

Weiß, Deborah, et al. Experimental and Numerical Preliminary Investigations of the Base Material and Preformed Components Regarding Fatigue Crack Growth in Joined Structures. 2020.
LibreCat: /record/23982

Kappe, Fabian, et al. Investigation of Influencing Parameters on the Joint Formation of the Self-Piercing Riveting Process. 2020.
LibreCat: /record/20680

Martin, Sven, et al. “Probability Distribution of Joint Point Loadings in Car Body Structures under Global Bending and Torsion.”10.1016/j.promfg.2020.04.324__Procedia Manufacturing, Elsevier, 2020, pp. 419–24, doi:10.1016/j.promfg.2020.04.324.
LibreCat: /record/16859
DOI: 10.1016/j.promfg.2020.04.324

Rostek, Tim, et al. “Joining with Versatile Friction-Spun Joint Connectors.”10.1016/j.promfg.2020.04.313__Procedia Manufacturing, vol. 47,10.1016/j.promfg.2020.04.313__Elsevier Ltd, 2020, pp. 395–99, doi:10.1016/j.promfg.2020.04.313.
LibreCat: /record/30713
DOI: 10.1016/j.promfg.2020.04.313

Köhler, Daniel, et al. “Clinching in In-Situ CT—A Numerical Study on Suitable Tool Materials.”10.1016/j.jajp.2020.100034__Journal of Advanced Joining Processes, vol. 2, 100034, Elsevier BV, 2020, doi:10.1016/j.jajp.2020.100034.
LibreCat: /record/51203
DOI: 10.1016/j.jajp.2020.100034

Friedlein, J., et al. “Inverse Parameter Identification of an Anisotropic Plasticity Model for Sheet Metal.”10.1088/1757-899X/1157/1/012004__IOP Conference Series: Materials Science and Engineering, vol. 1157, 2021, p. 012004, doi:10.1088/1757-899X/1157/1/012004.
LibreCat: /record/30647
DOI: 10.1088/1757-899X/1157/1/012004