Kraus, M., et al. “Mechanical Joining without Auxiliary Element by Cold Formed Pins for Multi-Material-Systems.”10.1063/1.5112570__AIP Conference Proceedings, vol. 2113, 2019, p. 050006, doi:10.1063/1.5112570.

Bielak, Christian Roman, et al. “Numerical Analysis of the Robustness of Clinching Process Considering the Pre-Forming of the Parts .”https://doi.org/10.1016/j.jajp.2020.100038__Journal of Advanced Joining Processes. , Elsevier, 2020, doi:https://doi.org/10.1016/j.jajp.2020.100038.

Steinfelder, C., and A. Brosius. “A New Approach for the Evaluation of Component and Joint Loads Based on Load Path Analysis.”10.1007/978-3-662-62138-7_14__Lecture Notes in Production Engineering, 2020, pp. 134–41, doi:10.1007/978-3-662-62138-7_14.

Böhm, H., et al. “Characterization and Numerical Modelling of Through-Thickness Metallic-Pin-Reinforced Fibre/Thermoplastic Composites under Bending Loading.”10.3390/jcs4040188__Journal of Composites Science, vol. 4, 2020, p. 188, doi:10.3390/jcs4040188.

Sadeghian, B., et al. “Investigation of Clinched Joints – A Finite Element Simulation of a Non-Destructive Approach.”10.1007/978-3-662-62138-7_12__Lecture Notes in Production Engineering, 2020, pp. 116–24, doi:10.1007/978-3-662-62138-7_12.

Ewenz, L., et al. “Untersuchungen Zum Einfluss von Geometrieparametern Bei Artgleichen Al-Clinchverbindungen Auf Das Ermüdungsverhalten Im Bereich Hoher Bis Sehr Hoher Lastspielzahlen.”10.48447/WP-2020-039__Tagung Werkstoffprüfung 2020. Werkstoffe Und Bauteile Auf Dem Prüfstand. Prüftechnik - Kennwertermit, 2020, doi:10.48447/WP-2020-039.

Grydin, Olexandr, et al. “Influence of Nozzle Shape on Near-Surface Segregation Formation During Twin-Roll Casting of Aluminum Strips.”10.1007/978-3-030-36408-3_141__Light Metals 2020, 2020, pp. 1039–44, doi:10.1007/978-3-030-36408-3_141.

Köhler, D., et al. “Experimental and Numerical Studies on the Deformation of a Flexible Wire in an Injection Moulding Process.”10.1016/j.promfg.2020.04.288__Procedia Manufacturing, vol. 47, 2020, pp. 940–47, doi:10.1016/j.promfg.2020.04.288.

Zirngibl, C., et al. “Potentiale Datengestützter Methoden Zur Gestaltung Und Optimierung Mechanischer Fügeverbindungen.”10.35199/dfx2020.8__Proceedings of the 31st Symposium Design for X (D), 2020, doi:10.35199/dfx2020.8.

Köhler, D., et al. “Clinching in In-Situ CT—A Numerical Study on Suitable Tool Materials.”10.1016/j.jajp.2020.100034__Journal of Advanced Joining Processes, vol. 2, 2020, p. 100034, doi:10.1016/j.jajp.2020.100034.

Kraus, M., and M. Merklein. “Potential of Joining Dissimilar Materials by Cold Formed Pin-Structures.”10.1016/j.jmatprotec.2020.116697__Journal of Materials Processing Technology, vol. 283, 2020, p. 116697, doi:10.1016/j.jmatprotec.2020.116697.

Bielak, Christian Roman, et al. Development of a numerical method for analyzing the robustness of clinching in versatile process chains.

Wituschek, S., et al. “Test Method for Friction Characterization of Rivets.”10.4028/www.scientific.net/ddf.404.132__Defect and Diffusion Forum, vol. 404, 2020, pp. 132–37, doi:10.4028/www.scientific.net/ddf.404.132.

Weiß, Deborah, et al. Development of a Special Specimen Geometry for the Experimental Determination of Fracture Mechanical Parameters of Clinchable Metal Sheets. Elsevier, 2020, pp. 2335–41, doi:10.1016/j.prostr.2020.11.081.

Weiß, Deborah, et al. Experimental and Numerical Preliminary Investigations of the Base Material and Preformed Components Regarding Fatigue Crack Growth in Joined Structures. 2020.

Kappe, Fabian, et al. Investigation of Influencing Parameters on the Joint Formation of the Self-Piercing Riveting Process. 2020.

Martin, Sven, et al. “Probability Distribution of Joint Point Loadings in Car Body Structures under Global Bending and Torsion.”10.1016/j.promfg.2020.04.324__Procedia Manufacturing, Elsevier, 2020, pp. 419–24, doi:10.1016/j.promfg.2020.04.324.

Rostek, Tim, et al. “Joining with Versatile Friction-Spun Joint Connectors.”10.1016/j.promfg.2020.04.313__Procedia Manufacturing, vol. 47,10.1016/j.promfg.2020.04.313__Elsevier Ltd, 2020, pp. 395–99, doi:10.1016/j.promfg.2020.04.313.

Köhler, Daniel, et al. “Clinching in In-Situ CT—A Numerical Study on Suitable Tool Materials.”10.1016/j.jajp.2020.100034__Journal of Advanced Joining Processes, vol. 2, 100034, Elsevier BV, 2020, doi:10.1016/j.jajp.2020.100034.

Friedlein, J., et al. “Inverse Parameter Identification of an Anisotropic Plasticity Model for Sheet Metal.”10.1088/1757-899X/1157/1/012004__IOP Conference Series: Materials Science and Engineering, vol. 1157, 2021, p. 012004, doi:10.1088/1757-899X/1157/1/012004.