Kraus, M., Frey, P., Kleffel, T., Drummer, D., &; Merklein, M. (2019). Mechanical joining without auxiliary element by cold formed pins for multi-material-systems. AIP Conference Proceedings, 2113, 050006.https://doi.org/10.1063/1.5112570 

Bielak, C. R., Böhnke, M., Beck, R., Bobbert, M., &; Meschut, G. (2020). Numerical analysis of the robustness of clinching process considering the pre-forming of the parts . Journal of Advanced Joining Processes. .https://doi.org/10.1016/j.jajp.2020.100038 

Steinfelder, C., &; Brosius, A. (2020). A New Approach for the Evaluation of Component and Joint Loads Based on Load Path Analysis. Lecture Notes in Production Engineering, 134–141.https://doi.org/10.1007/978-3-662-62138-7_14 

Böhm, H., Zhang, H., Gröger, B., Hornig, A., &; Gude, M. (2020). Characterization and Numerical Modelling of Through-Thickness Metallic-Pin-Reinforced Fibre/Thermoplastic Composites under Bending Loading. Journal of Composites Science, 4, 188.https://doi.org/10.3390/jcs4040188 

Sadeghian, B., Guilleaume, C., Lafarge, R., &; Brosius, A. (2020). Investigation of Clinched Joints – A Finite Element Simulation of a Non-destructive Approach. Lecture Notes in Production Engineering, 116–124.https://doi.org/10.1007/978-3-662-62138-7_12 

Ewenz, L., Schettler, S., Zeuner, A. T., &; Zimmermann, M. (2020). Untersuchungen zum Einfluss von Geometrieparametern bei artgleichen Al-Clinchverbindungen auf das Ermüdungsverhalten im Bereich hoher bis sehr hoher Lastspielzahlen. Tagung Werkstoffprüfung 2020. Werkstoffe Und Bauteile Auf Dem Prüfstand. Prüftechnik - Kennwertermit.https://doi.org/10.48447/WP-2020-039 

Grydin, O., Stolbchenko, M., &; Schaper, M. (2020). Influence of Nozzle Shape on Near-Surface Segregation Formation During Twin-Roll Casting of Aluminum Strips. In Light Metals 2020 (pp. 1039–1044).https://doi.org/10.1007/978-3-030-36408-3_141 

Köhler, D., Gröger, B., Kupfer, R., Hornig, A., &; Gude, M. (2020). Experimental and Numerical Studies on the Deformation of a Flexible Wire in an Injection Moulding Process. Procedia Manufacturing, 47, 940–947.https://doi.org/10.1016/j.promfg.2020.04.288 

Zirngibl, C., Schleich, B., &; Wartzack, S. (2020). Potentiale datengestützter Methoden zur Gestaltung und Optimierung mechanischer Fügeverbindungen. Proceedings of the 31st Symposium Design for X (D).https://doi.org/10.35199/dfx2020.8 

Köhler, D., Kupfer, R., &; Gude, M. (2020). Clinching in in-situ CT—A numerical study on suitable tool materials. Journal of Advanced Joining Processes, 2, 100034.https://doi.org/10.1016/j.jajp.2020.100034 

Kraus, M., &; Merklein, M. (2020). Potential of Joining Dissimilar Materials by Cold Formed Pin-Structures. Journal of Materials Processing Technology, 283, 116697.https://doi.org/10.1016/j.jmatprotec.2020.116697 

Bielak, C. R., Böhnke, M., Bobbert, M., &; Meschut, G. (n.d.). Development of a numerical method for analyzing the robustness of clinching in versatile process chains. Material Science and Engineering Congress - MSE 2020, Darmstadt.

Wituschek, S., Kuball, C. M., Merklein, M., &; Lechner, M. (2020). Test Method for Friction Characterization of Rivets. Defect and Diffusion Forum, 404, 132–137.https://doi.org/10.4028/www.scientific.net/ddf.404.132 

Weiß, D., Schramm, B., &; Kullmer, G. (2020). Development of a special specimen geometry for the experimental determination of fracture mechanical parameters of clinchable metal sheets (Vol. 28, pp. 2335–2341). Elsevier.https://doi.org/10.1016/j.prostr.2020.11.081 

Weiß, D., Schramm, B., &; Kullmer, G. (2020). Experimental and numerical preliminary investigations of the base material and preformed components regarding fatigue crack growth in joined structures. Material Science and Engineering Congress - M, Darmstadt.

Kappe, F., Wituschek, S., Lechner, M., Bobbert, M., Meschut, G., &; Merklein, M. (2020). Investigation of influencing parameters on the joint formation of the self-piercing riveting process. Material Science and Engineering Congress - MSE 2020, Darmstadt .

Martin, S., Camberg, A. A., &; Tröster, T. (2020). Probability Distribution of Joint Point Loadings in Car Body Structures under Global Bending and Torsion. Procedia Manufacturing, 419–424.https://doi.org/10.1016/j.promfg.2020.04.324 

Rostek, T., Wiens, E., &; Homberg, W. (2020). Joining with Versatile Friction-Spun Joint Connectors. Procedia Manufacturing, 47, 395–399.https://doi.org/10.1016/j.promfg.2020.04.313 

Köhler, D., Kupfer, R., &; Gude, M. (2020). Clinching in in-situ CT—A numerical study on suitable tool materials. Journal of Advanced Joining Processes, 2, Article 100034.https://doi.org/10.1016/j.jajp.2020.100034 

Friedlein, J., Wituschek, S., Lechner, M., Mergheim, J., &; Steinmann, P. (2021). Inverse parameter identification of an anisotropic plasticity model for sheet metal. IOP Conference Series: Materials Science and Engineering, 1157, 012004.https://doi.org/10.1088/1757-899X/1157/1/012004 

Popp, J., Wolf, M., Mattner, T., &; Drummer, D. (2021). Energy direction in ultrasonic impregnation of continuous fiber-reinforced thermoplastics. Journal of Composites Science, 5, 239.https://doi.org/10.3390/jcs5090239 

Kalich, J., &; Füssel, U. (2021). Influence of the production process on the binding mechanism of clinched aluminum steel mixed compounds. Journal of Manufacturing and Materials Processing, 5, 105.https://doi.org/10.3390/jmmp5040105 

Pivovarov, D., Mergheim, J., Willner, K., &; Steinmann, P. (2021). Stochastic local FEM for computational homogenization of heterogeneous materials exhibiting large plastic deformations. Computational Mechanics.https://doi.org/10.1007/s00466-021-02099-x 

Friedlein, J., Mergheim, J., &; Steinmann, P. (2021). Anisotropic plasticitydamage material model for sheet metal — Regularised single surface formulation. PAMM, 21.https://doi.org/10.1002/pamm.202100068 

Bielak, C. R., Böhnke, M., Bobbert, M., &; Meschut, G. (n.d.). Further development of a numerical method for analyzing the load capacity of clinched joints in versatile process chains. ESAFORM 2021, Lüttich.https://doi.org/10.25518/esaform21.4298 

Römisch, D., Zirngibl, C., Schleich, B., Wartzack, S., &; Merklein, M. (2021). Data-driven analysis of cold-formed pin structure characteristics in the context of versatile joining processes. IOP Conference Series: Materials Science and Engineering, 1157, 012077.https://doi.org/10.1088/1757-899X/1157/1/012077 

Steinfelder, C., Kalich, J., Brosius, A., &; Füssel, U. (2021). Numerical and experimental investigation of the transmission moment of clinching points. IOP Conference Series: Materials Science and Engineering, 1157, 012003.https://doi.org/10.1088/1757-899x/1157/1/012003 

Popp, J., Kleffel, T., Römisch, D., Papke, T., Merklein, M., &; Drummer, D. (2021). Fiber Orientation Mechanism of Continuous Fiber Reinforced Thermoplastics Hybrid Parts Joined with Metallic Pins. Applied Composite Materials, 28, 951–972.https://doi.org/10.1007/s10443-021-09892-0 

Gröger, B., Troschitz, J., Vorderbrüggen, J., Vogel, C., Kupfer, R., Meschut, G., &; Gude, M. (2021). Clinching of Thermoplastic Composites and Metals—A Comparison of Three Novel Joining Technologies. Materials, 14, 2286.https://doi.org/10.3390/ma14092286X 

Busch, M., &; Hausotte, T. (2021). Determination of the Interface Structural Resolution of an Industrial X-Ray Computed Tomograph Using a Spherical Specimen and a Gap Specimen Consisting of Gauge Blocks. Key Engineering Materials, 883, 41–48.https://doi.org/10.4028/www.scientific.net/kem.883.41 

Köhler, D., Kupfer, R., Troschitz, J., &; Gude, M. (2021). Clinching in In-situ CT – Experimental Study on Suitable Tool Materials. ESAFORM 2021.https://doi.org/10.25518/esaform21.2781 

Köhler, D., Kupfer, R., Troschitz, J., &; Gude, M. (2021). In Situ Computed Tomography—Analysis of a Single-Lap Shear Test with Clinch Points. Materials, 14, 1859.https://doi.org/10.3390/ma14081859 

Wituschek, S., &; Lechner, M. (2021). Friction Characterisation for a Tumbling Self-Piercing Riveting Process. Key Engineering Materials, 883, 27–34.https://doi.org/10.4028/www.scientific.net/kem.883.27 

Wischer, C., Steinfelder, C., Homberg, W., &; Brosius, A. (2021). Joining with Friction Spun Joint Connectors – Manufacturing and Analysis. IOP Conference Series: Materials Science and Engineering, 1157, 012007.https://doi.org/10.1088/1757-899x/1157/1/012007 

Wischer, C., &; Homberg, W. (2021). A contribution on versatile process chains: joining with adaptive joining elements, formed by friction spinning. Production Engineering.https://doi.org/10.1007/s11740-021-01094-8 

Weiß, D., Schramm, B., &; Kullmer, G. (2021). Numerical and Experimental Fracture Mechanical Investigations of Clinchable Sheet Metals Made of HX. Key Engineering Materials, 883, 127–132.https://doi.org/10.4028/www.scientific.net/kem.883.127 

Gröger, B., Köhler, D., Vorderbrüggen, J., Troschitz, J., Kupfer, R., Meschut, G., &; Gude, M. (2021). Computed tomography investigation of the material structure in clinch joints in aluminium fibre-reinforced thermoplastic sheets. Production Engineering.https://doi.org/10.1007/s11740-021-01091-x 

Weiß, D., Schramm, B., &; Kullmer, G. (2021). Holistic investigation chain for the experimental determination of fracture mechanical material parameters with special specimens. Production Engineering.https://doi.org/10.1007/s11740-021-01096-6 

Zirngibl, C., Schleich, B., &; Wartzack, S. (2021). Approach for the automated and data-based design of mechanical joints. Proceedings of the Design Society, 1, 521.https://doi.org/10.1017/pds.2021.52 

Zirngibl, C., Dworschak, F., Schleich, B., &; Wartzack, S. (2021). Application of reinforcement learning for the optimization of clinch joint characteristics. Production Engineering.https://doi.org/10.1007/s11740-021-01098-4 

Römisch, D., Popp, J., Drummer, D., &; Merklein, M. (2021). Joining of CFRT-steel hybrid parts via hole-forming and subsequent pin caulking. Production Engineering.https://doi.org/10.1007/s11740-021-01093-9 

Lafarge, R., Wolf, A., Guilleaume, C., &; Brosius, A. (2021). A New Non-destructive Testing Method Applied to Clinching. Minerals, Metals and Materials Series, 1461.https://doi.org/10.1007/978-3-030-75381-8_121 

Römisch, D., Kraus, M., &; Merklein, M. (2021). Experimental study on joining by forming of hct590x + z and en-aw 6014 sheets using cold extruded pin structures. Journal of Manufacturing and Materials Processing, 5, 25.https://doi.org/10.3390/jmmp5010025 

Römisch, D., Kraus, M., &; Merklein, M. (2021). Investigation of Different Joining by Forming Strategies when Connecting Different Metals without Auxiliary Elements. Key Engineering Materials, 883, 19–26.https://doi.org/10.4028/www.scientific.net/kem.883.19 

Wituschek, S., &; Lechner, M. (2021). Material characterisation methods for a tumbling self-piercing riveting process. ESAFORM 2021.https://doi.org/10.25518/esaform21.398 

Köhler, D., Sadeghian, B., Kupfer, R., Troschitz, J., Gude, M., &; Brosius, A. (2021). A Method for Characterization of Geometric Deviations in Clinch Points with Computed Tomography and Transient Dynamic Analysis. Key Engineering Materials, 883, 89–96.https://doi.org/10.4028/www.scientific.net/kem.883.89 

Ewenz, L., Kalich, J., Zimmermann, M., &; Füssel, U. (2021). Effect of Different Tool Geometries on the Mechanical Properties of Al-Al Clinch Joints. Key Engineering Materials, 883, 65–72.https://doi.org/10.4028/www.scientific.net/kem.883.65 

Gröger, B., Hornig, A., Hoog, A., &; Gude, M. (2021). Modelling of thermally supported clinching of fibre-reinforced thermoplastics: Approaches on mesoscale considering large deformations and fibre failure. ESAFORM 2021 - 24th International Conference on Material Forming.https://doi.org/10.25518/esaform21.4293 

Wiens, E., Wischer, C., &; Homberg, W. (2021). Development of a novel adaptive joining technology employing friction-spun joint connectors (FSJC). ESAFORM, 4682.https://doi.org/10.25518/esaform21.4682 

Harzheim, S., Steinfelder, C., Wallmersperger, T., &; Brosius, A. (2021). A First Approach for the Treatment of Galvanic Corrosion and of Load-Bearing Capacity of Clinched Joints. Key Engineering Materials, 883, 97–104.https://doi.org/10.4028/www.scientific.net/kem.883.97