Kullmer, G., Weiß, D., &; Schramm, B. (2024). An alternative and robust formulation of the fatigue crack growth rate curve for long cracks. Engineering Fracture Mechanics, 296, Article 109826.https://doi.org/10.1016/j.engfracmech.2023.109826 
LibreCat: /record/51737
DOI: 10.1016/j.engfracmech.2023.109826

Kullmer, G., Weiß, D., &; Schramm, B. (2024). Weiterentwicklung des Exponentialansatzes zur Beschreibung von Rissfortschrittskurven. 56. Tagung des DVM-Arbeitskreises Bruchmechanik und Bauteilsicherheit , Kassel.https://doi.org/10.48447/BR-2024-369 
LibreCat: /record/53394
DOI: 10.48447/BR-2024-369

Busch, M., &; Hausotte, T. (2023). Simulation-based investigation of the metrological interface structural resolution capability of X-ray computed tomography scanners. Journal of Sensors and Sensor Systems, 12(1), 1–8.https://doi.org/10.5194/jsss-12-1-2023 
LibreCat: /record/36800
DOI: 10.5194/jsss-12-1-2023

Brosius, A., Ewenz, L., Stephan, R., &; Zimmermann, M. (2023). Anrisserkennung an geclinchten Proben während einer zyklischen Belastung unter Nutzung eines Scanning Laser Doppler Vibrometers. In M. Zimmermann (Ed.), Tagung Werkstoffprüfung 2022. Deutsche Gesellschaft für Materialkunde e.V. (DGM).
LibreCat: /record/38509

Ewenz, L., Kuczyk, M., Schöne, S., &; Zimmermann, M. (2023). Ableitung flacher Probengeometrien zur Abbildung mehraxialer Spannungszustände in Clinchverbindungen unter zyklischer Beanspruchung. In M. Zimmermann (Ed.), Tagung Werkstoffprüfung 2022. Deutsche Gesellschaft für Materialkunde e.V. (DGM).
LibreCat: /record/38511

Ewenz, L., Kühne, R., Schöne, S., &; Zimmermann, M. (2023). Untersuchungen zum Geometrie- und Frequenzeinfluss bei der Ermittlung zyklischer Kennwerte geclinchter Überlappverbindungen. In M. Zimmermann (Ed.), Tagung Werkstoffprüfung 2022. Deutsche Gesellschaft für Materialkunde e.V. (DGM).
LibreCat: /record/38507

Wituschek, S., Elbel, L., &; Lechner, M. (2023). Versatile self-piercing riveting with a tumbling superimposed punch. Materials Research Proceedings.https://doi.org/10.21741/9781644902479-122 
LibreCat: /record/46476
DOI: 10.21741/9781644902479-122

Köhler, D., Kupfer, R., Troschitz, J., &; Gude, M. (2023). Comparison of ex- and in-situ investigations of clinched single-lap shear specimens. Materials Research Proceedings.https://doi.org/10.21741/9781644902417-20 
LibreCat: /record/51190
DOI: 10.21741/9781644902417-20

Köhler, D., Stephan, R., Kupfer, R., Troschitz, J., Brosius, A., &; Gude, M. (2023). In-situ Computed Tomography and Transient Dynamic Analysis of a Single-Lap Shear Test with a Composite-Metal Clinch Point. In Lecture Notes in Production Engineering. Springer International Publishing.https://doi.org/10.1007/978-3-031-18318-8_28 
LibreCat: /record/51194
DOI: 10.1007/978-3-031-18318-8_28

Böhnke, M., Bielak, C. R., Friedlein, J., Bobbert, M., Mergheim, J., Steinmann, P., &; Meschut, G. (2023). A calibration method for failure modeling in clinching process simulations. Materials Research Proceedings.https://doi.org/10.21741/9781644902417-34 
LibreCat: /record/43462
DOI: 10.21741/9781644902417-34

Friedlein, J., Bielak, C. R., Böhnke, M., Bobbert, M., Mergheim, J., Steinmann, P., &; Meschut, G. (2023). Influence of plastic orthotropy on clinching of sheet metal. Materials Research Proceedings.https://doi.org/10.21741/9781644902417-17  
LibreCat: /record/43463
DOI: 10.21741/9781644902417-17 

Bielak, C. R., Böhnke, M., Bobbert, M., &; Meschut, G. (2023). Numerical Investigation of the Coupled Friction Behavior in the Clinching Process Chain. In Lecture Notes in Mechanical Engineering. Springer Nature Switzerland.https://doi.org/10.1007/978-3-031-41341-4_15 
LibreCat: /record/52614
DOI: 10.1007/978-3-031-41341-4_15

Butzhammer, L., Kappe, F., Meschut, G., &; Hausotte, T. (2023). Dynamic conformity assessment for joining force monitoring using Bayes filters. Materials Research Proceedings.https://doi.org/10.21741/9781644902417-48 
LibreCat: /record/52831
DOI: 10.21741/9781644902417-48

Wituschek, S., Kappe, F., Meschut, G., &; Lechner, M. (2023). Combination of versatile self-piercing riveting processes. Materials Research Proceedings.https://doi.org/10.21741/9781644902417-16 
LibreCat: /record/52821
DOI: 10.21741/9781644902417-16

Weiß, D., Duffe, T., Buczek, M., Kullmer, G., &; Schramm, B. (2023). Bruchmechanische Untersuchung des Dualphasenstahls HX unter Temperatureinfluss. Werkstoffprüfung 2023: Werkstoffe und Bauteile auf dem Prüfstand - Tagung, Berlin.https://doi.org/10.48447/WP-2023-244 
LibreCat: /record/51739
DOI: 10.48447/WP-2023-244

Neuser, M., Kappe, F., Ostermeier, J., Krüger, J. T., Bobbert, M., Meschut, G., Schaper, M., &; Grydin, O. (2022). Mechanical Properties and Joinability of AlSi9 Alloy Manufactured by TwinRoll Casting. Advanced Engineering Materials, 24(10), Article 2200874.https://doi.org/10.1002/adem.202200874 
LibreCat: /record/34207
DOI: 10.1002/adem.202200874

Friedlein, J., Mergheim, J., &; Steinmann, P. (2022). Influence of Kinematic Hardening on Clinch Joining of Dual-Phase Steel HX Sheet Metal. In The Minerals, Metals &;amp; Materials Series. Springer International Publishing.https://doi.org/10.1007/978-3-031-06212-4_31 
LibreCat: /record/34211
DOI: 10.1007/978-3-031-06212-4_31

Ewenz, L., Bielak, C. R., Otroshi, M., Bobbert, M., Meschut, G., &; Zimmermann, M. (2022). Numerical and experimental identification of fatigue crack initiation sites in clinched joints. Production Engineering, 16(2–3), 305–313.https://doi.org/10.1007/s11740-022-01124-z 
LibreCat: /record/34213
DOI: 10.1007/s11740-022-01124-z

Köhler, D., Kupfer, R., Troschitz, J., &; Gude, M. (2022). Clinching in In Situ CT—A Novel Validation Method for Mechanical Joining Processes. In The Minerals, Metals &; Materials Series. Springer International Publishing.https://doi.org/10.1007/978-3-031-06212-4_75 
LibreCat: /record/34212
DOI: 10.1007/978-3-031-06212-4_75

Römisch, D., Kraus, M., &; Merklein, M. (2022). Investigation of the influence of formed, non-rotationally symmetrical pin geometries and their effect on the joint quality of steel and aluminium sheets by direct pin pressing. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 236(6), 1187–1202.https://doi.org/10.1177/14644207221081408 
LibreCat: /record/34219
DOI: 10.1177/14644207221081408

Popp, J., Römisch, D., Merklein, M., &; Drummer, D. (2022). Joining of CFRT/Steel Hybrid Parts via Direct Pressing of Cold Formed Non-Rotational Symmetric Pin Structures. Applied Sciences, 12(10), Article 4962.https://doi.org/10.3390/app12104962 
LibreCat: /record/34223
DOI: 10.3390/app12104962

Troschitz, J., Gröger, B., Würfel, V., Kupfer, R., &; Gude, M. (2022). Joining Processes for Fibre-Reinforced Thermoplastics: Phenomena and Characterisation. Materials, 15(15), Article 5454.https://doi.org/10.3390/ma15155454 
LibreCat: /record/34225
DOI: 10.3390/ma15155454

Binder, F., &; Hausotte, T. (2022). Über die Abgrenzung von Auflösungskonzepten in der industriellen Computertomografie. Tm - Technisches Messen, 89(), 20–24.https://doi.org/10.1515/teme-2022-0065 
LibreCat: /record/34221
DOI: 10.1515/teme-2022-0065

Busch, M., Butzhammer, L., &; Hausotte, T. (2022). Herausforderungen bei computertomografischen Untersuchungen von Fügeverbindungen. Tm - Technisches Messen, 89(), 83–88.https://doi.org/10.1515/teme-2022-0061 
LibreCat: /record/34220
DOI: 10.1515/teme-2022-0061

Zirngibl, C., Sauer, C., Schleich, B., &; Wartzack, S. (2022). Knowledge and Data-Based Design and Dimensioning of Mechanical Joining Connections. Volume 2: 42nd Computers and Information in Engineering Conference (CIE).https://doi.org/10.1115/detc2022-89172 
LibreCat: /record/34415
DOI: 10.1115/detc2022-89172

Zirngibl, C., Schleich, B., &; Wartzack, S. (2022). Estimation of Clinch Joint Characteristics Based on Limited Input Data Using Pre-Trained Metamodels. AI, 3(4), 990–1006.https://doi.org/10.3390/ai3040059 
LibreCat: /record/34417
DOI: 10.3390/ai3040059

Köhler, D., Sadeghian, B., Troschitz, J., Kupfer, R., Gude, M., &; Brosius, A. (2022). Characterisation of lateral offsets in clinch points with computed tomography and transient dynamic analysis. Journal of Advanced Joining Processes, 5, 100089.https://doi.org/10.1016/j.jajp.2021.100089 
LibreCat: /record/30626
DOI: 10.1016/j.jajp.2021.100089

Popp, J., &; Drummer, D. (2022). Joining of continuous fiber reinforced thermoplastic/steel hybrid parts via undercutting pin structures and infrared heating. Journal of Advanced Joining Processes, 5, 100084.https://doi.org/10.1016/j.jajp.2021.100084 
LibreCat: /record/30625
DOI: 10.1016/j.jajp.2021.100084

Ewenz, L., Kuczyk, M., &; Zimmermann, M. (2022). Effect of the tool geometry on microstructure and geometrical features of clinched aluminum. Journal of Advanced Joining Processes, 5.https://doi.org/10.1016/j.jajp.2021.100091 
LibreCat: /record/30624
DOI: 10.1016/j.jajp.2021.100091

Gröger, B., Würfel, V., Hornig, A., &; Gude, M. (2022). Forming process induced material structure of fibre-reinforced thermoplastics - Experimental and numerical investigation of a bladder-assisted moulding process. Journal of Advanced Joining Processes, 5.https://doi.org/10.1016/j.jajp.2022.100100 
LibreCat: /record/30622
DOI: 10.1016/j.jajp.2022.100100

Wituschek, S., &; Lechner, M. (2022). Investigation of the influence of the tumbling angle on a tumbling self-piercing riveting process. Production Engineering.https://doi.org/10.1177/14644207221080068 
LibreCat: /record/30717
DOI: 10.1177/14644207221080068

Steinfelder, C., Acksteiner, J., Guilleaume, C., &; Brosius, A. (2022). Analysis of the interactions between joint and component properties during clinching. Production Engineering.https://doi.org/10.1007/s11740-021-01102-x 
LibreCat: /record/30629
DOI: 10.1007/s11740-021-01102-x

Busch, M., &; Hausotte, T. (2022). Application of an edge detection algorithm for surface determination in industrial X-ray computed tomography. Production Engineering.https://doi.org/10.1007/s11740-021-01100-z 
LibreCat: /record/30640
DOI: 10.1007/s11740-021-01100-z

Kalich, J., &; Füssel, U. (2022). Design of clinched joints on the basis of binding mechanisms. Production Engineering.https://doi.org/10.1007/s11740-022-01108-z 
LibreCat: /record/30628
DOI: 10.1007/s11740-022-01108-z

Friedlein, J., Mergheim, J., &; Steinmann, P. (2022). Observations on additive plasticity in the logarithmic strain space at excessive strains. International Journal of Solids and Structures, 239–240, 111416.https://doi.org/10.1016/j.ijsolstr.2021.111416 
LibreCat: /record/30627
DOI: 10.1016/j.ijsolstr.2021.111416

Harzheim, S., Ewenz, L., Zimmermann, M., &; Wallmersperger, T. (2022). Corrosion Phenomena and Fatigue Behavior of Clinched Joints: Numerical and Experimental Investigations. Journal of Advanced Joining Processes, 6, Article 100130.https://doi.org/10.1016/j.jajp.2022.100130 
LibreCat: /record/34253
DOI: 10.1016/j.jajp.2022.100130

Zeuner, A. T., Ewenz, L., Kalich, J., Schöne, S., Füssel, U., &; Zimmermann, M. (2022). The Influence of Heat Treatment on the Microstructure, Surface Roughness and Shear Tensile Strength of AISI 304 Clinch Joints. Metals, 12(9), Article 1514.https://doi.org/10.3390/met12091514 
LibreCat: /record/34252
DOI: 10.3390/met12091514

Römisch, D., Zirngibl, C., Schleich, B., Wartzack, S., &; Merklein, M. (2022). Robustness Analysis of Pin Joining. Journal of Manufacturing and Materials Processing, 6(5), Article 122.https://doi.org/10.3390/jmmp6050122 
LibreCat: /record/34249
DOI: 10.3390/jmmp6050122

Borowski, A., Gröger, B., Füßel, R., &; Gude, M. (2022). Characterisation of Fibre Bundle Deformation Behaviour—Test Rig, Results and Conclusions. Journal of Manufacturing and Materials Processing, 6(6), Article 146.https://doi.org/10.3390/jmmp6060146 
LibreCat: /record/34255
DOI: 10.3390/jmmp6060146

Römisch, D., Hetzel, A., Wituschek, S., Lechner, M., &; Merklein, M. (2022). Pin Extrusion for Mechanical Joining from Orbital Formed Tailored Blanks with Local Material Pre-Distribution. Journal of Manufacturing and Materials Processing, 6(6), Article 127.https://doi.org/10.3390/jmmp6060127 
LibreCat: /record/34248
DOI: 10.3390/jmmp6060127

Gröger, B., Römisch, D., Kraus, M., Troschitz, J., Füßel, R., Merklein, M., &; Gude, M. (2022). Warmforming Flow Pressing Characteristics of Continuous Fibre Reinforced Thermoplastic Composites. Polymers, 14(22), Article 5039.https://doi.org/10.3390/polym14225039 
LibreCat: /record/34247
DOI: 10.3390/polym14225039

Gerritzen, J., Hornig, A., Gröger, B., &; Gude, M. (2022). A Data Driven Modelling Approach for the Strain Rate Dependent 3D Shear Deformation and Failure of Thermoplastic Fibre Reinforced Composites: Experimental Characterisation and Deriving Modelling Parameters. Journal of Composites Science, 6(10), Article 318.https://doi.org/10.3390/jcs6100318 
LibreCat: /record/34256
DOI: 10.3390/jcs6100318

Schaude, J., &; Hausotte, T. (2022). Atomic Force Microscope with an Adjustable Probe Direction and Integrated Sensing and Actuation. Nanomanufacturing and Metrology, 5(2), 139–148.https://doi.org/10.1007/s41871-022-00143-9 
LibreCat: /record/34214
DOI: 10.1007/s41871-022-00143-9

Shi, Y., Harzheim, S., Hofmann, M., &; Wallmersperger, T. (2022). A Damage Model for Corrosion Fatigue Due to Hydrogen Embrittlement. In Material Modeling and Structural Mechanics. Springer International Publishing.https://doi.org/10.1007/978-3-030-97675-0_9 
LibreCat: /record/34209
DOI: 10.1007/978-3-030-97675-0_9

Kalich, J., Matzke, M., Pfeiffer, W., Schlegel, S., Kornhuber, L., &; Füssel, U. (2022). Long-Term Behavior of Clinched Electrical Contacts. Metals, 12(10), Article 1651.https://doi.org/10.3390/met12101651 
LibreCat: /record/34251
DOI: 10.3390/met12101651

Gröger, B., Wang, J., Bätzel, T., Hornig, A., &; Gude, M. (2022). Modelling and Simulation Strategies for Fluid–Structure-Interactions of Highly Viscous Thermoplastic Melt and Single Fibres—A Numerical Study. Materials, 15(20), Article 7241.https://doi.org/10.3390/ma15207241 
LibreCat: /record/34254
DOI: 10.3390/ma15207241

Harzheim, S., Hofmann, M., &; Wallmersperger, T. (2022). Comparison of two mesh-moving techniques for finite element simulations of galvanic corrosion. Acta Mechanica, 233(11), 4427–4439.https://doi.org/10.1007/s00707-022-03326-z 
LibreCat: /record/34257
DOI: 10.1007/s00707-022-03326-z

Füssel, U., Schlegel, S., Reschke, G., &; Kalich, J. (2022). Electrical Contacting of Aluminum Bus Bars Using Clinching and Functional Elements. SFU/ICAFT 2022.https://doi.org/10.3390/engproc2022026005 
LibreCat: /record/34250
DOI: 10.3390/engproc2022026005

Köhler, D., Stephan, R., Kupfer, R., Troschitz, J., Brosius, A., &; Gude, M. (2022). Investigations on Combined in situ CT and Acoustic Analysis during Clinching. Key Engineering Materials, 926, 1489–1497.https://doi.org/10.4028/p-32330d 
LibreCat: /record/34280
DOI: 10.4028/p-32330d

Zirngibl, C., Schleich, B., &; Wartzack, S. (2022). Robust estimation of clinch joint characteristics based on data-driven methods. The International Journal of Advanced Manufacturing Technology.https://doi.org/10.1007/s00170-022-10441-7 
LibreCat: /record/34414
DOI: 10.1007/s00170-022-10441-7

Harzheim, S., Hofmann, M., &; Wallmersperger, T. (2022). Numerical fatigue life prediction of corroded and non-corroded clinched joints. Mechanics of Advanced Materials and Structures, 1–6.https://doi.org/10.1080/15376494.2022.2140233 
LibreCat: /record/34261
DOI: 10.1080/15376494.2022.2140233

Stephan, R., &; Brosius, A. (2022). Experimental Measurement Method and Evaluation of an Analytical Approach for Sound Conduction through Multiple Clinched Sheets. The 28th Saxon Conference on Forming Technology SFU and the 7th International Conference on Accuracy in Forming Technology ICAFT.https://doi.org/10.3390/engproc2022026025 
LibreCat: /record/36462
DOI: 10.3390/engproc2022026025

Römisch, D., &; Merklein, M. (2022). Experimental and Numerical Analysis of Cold Formed Multi Pin Structures Using a Multi-Acting Tool Design. 12th Tooling Conference and Exhibition, Örebro.
LibreCat: /record/36468

Wituschek, S., &; Lechner, M. (2022). Versatile tool design for a tumbling self-piercing riveting process. Tooling 2022 .
LibreCat: /record/36470

Busch, M., Köhler, D., Hausotte, T., Kupfer, R., Troschitz, J., &; Gude, M. (2022). Approach to Determine the Characteristic Dimensions of Clinched Joints by Industrial X-ray Computed Tomography. 4 th Singapore International Non-destructive Testing Conference and Exhibition (SIN).
LibreCat: /record/36473

Butzhammer, L., Müller, A. M., &; Hausotte, T. (2022). Calibration of 3D scan trajectories for an industrial computed tomography setup with 6-DOF object manipulator system using a single sphere. Measurement Science and Technology, 34(1), Article 015403.https://doi.org/10.1088/1361-6501/ac9856 
LibreCat: /record/34264
DOI: 10.1088/1361-6501/ac9856

Böhnke, M., Unruh, E., Sell, S., Bobbert, M., Hein, D., &; Meschut, G. (2022). Functionality Study of an Optical Measurement Concept for Local Force Signal Determination in High Strain Rate Tensile Tests. Key Engineering Materials, 926, 1564–1572.https://doi.org/10.4028/p-wpuzyw 
LibreCat: /record/33002
DOI: 10.4028/p-wpuzyw

Böhnke, M., Bielak, C. R., Bobbert, M., &; Meschut, G. (2022). Development of a Modified Punch Test for Investigating the Failure Behavior in Sheet Metal Materials. In The Minerals, Metals &;amp; Materials Series. NUMISHEET 2022, Toronto, Kanada. Springer International Publishing.https://doi.org/10.1007/978-3-031-06212-4_52 
LibreCat: /record/33003
DOI: 10.1007/978-3-031-06212-4_52

Böhnke, M., Bielak, C. R., Bobbert, M., &; Meschut, G. (2022). Experimental and numerical investigation of the influence of multiaxial loading conditions on the failure behavior of clinched joints. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications.https://doi.org/10.1177/14644207221145886 
LibreCat: /record/34572
DOI: 10.1177/14644207221145886

Weiß, D., &; Schramm, B. (2022). Fracture mechanical investigation of preformed metal sheets using a novel CC-specimen. Procedia Structural Integrity, 42, 879–885.https://doi.org/10.1016/j.prostr.2022.12.111 
LibreCat: /record/35271
DOI: 10.1016/j.prostr.2022.12.111

Meschut, G., Merklein, M., Brosius, A., Drummer, D., Fratini, L., Füssel, U., Gude, M., Homberg, W., Martins, P. A. F., Bobbert, M., Lechner, M., Kupfer, R., Gröger, B., Han, D., Kalich, J., Kappe, F., Kleffel, T., Köhler, D., Kuball, C.-M.,https://doi.org/10.1016/j.jajp.2022.100113__Wolf, M. (2022). Review on mechanical joining by plastic deformation. Journal of Advanced Joining Processes, 5, Article 100113.https://doi.org/10.1016/j.jajp.2022.100113 
LibreCat: /record/34216
DOI: 10.1016/j.jajp.2022.100113

Wituschek, S., Kappe, F., Meschut, G., &; Lechner, M. (2022). Geometric and mechanical joint characterization of conventionally  and tumbled self-piercing riveting joints. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, Article 146442072211354.https://doi.org/10.1177/14644207221135400 
LibreCat: /record/34243
DOI: 10.1177/14644207221135400

Neuser, M., Kappe, F., Ostermeier, J., Krüger, J. T., Bobbert, M., Meschut, G., Schaper, M., &; Grydin, O. (2022). Mechanical Properties and Joinability of AlSi9 Alloy Manufactured by TwinRoll Casting. Advanced Engineering Materials, 24(10), Article 2200874.https://doi.org/10.1002/adem.202200874 
LibreCat: /record/34242
DOI: 10.1002/adem.202200874

Oesterwinter, A., Wischer, C., &; Homberg, W. (2022). Identification of Requirements for FE Modeling of an Adaptive Joining Technology Employing Friction-Spun Joint Connectors (FSJC). Metals, 12(5), Article 869.https://doi.org/10.3390/met12050869 
LibreCat: /record/31360
DOI: 10.3390/met12050869

Joy, T. D., Weiß, D., Schramm, B., &; Kullmer, G. (2022). Further Development of 3D Crack Growth Simulation Program to Include Contact Loading Situations. Applied Sciences, 12(15), Article 7557.https://doi.org/10.3390/app12157557 
LibreCat: /record/34224
DOI: 10.3390/app12157557

Weiß, D., Schramm, B., &; Kullmer, G. (2022). Influence of plane mixed-mode loading on the kinking angle of clinchable metal sheets. Procedia Structural Integrity, 39, 139–147.https://doi.org/10.1016/j.prostr.2022.03.082 
LibreCat: /record/30726
DOI: 10.1016/j.prostr.2022.03.082

Schramm, B., Harzheim, S., Weiß, D., Joy, T. D., Hofmann, M., Mergheim, J., &; Wallmersperger, T. (2022). A Review on the Modeling of the Clinching Process Chain - Part III: Operational Phase. Journal of Advanced Joining Processes, Article 100135.https://doi.org/10.1016/j.jajp.2022.100135 
LibreCat: /record/34070
DOI: 10.1016/j.jajp.2022.100135

Kullmer, G., Weiß, D., &; Schramm, B. (2022). Development of a method for the separate measurement of the growth of internal crack tips by means of the potential drop method. Engineering Fracture Mechanics, Article 108899.https://doi.org/10.1016/j.engfracmech.2022.108899 
LibreCat: /record/34246
DOI: 10.1016/j.engfracmech.2022.108899

Kappe, F., Wituschek, S., Bobbert, M., Lechner, M., &; Meschut, G. (2022). Joining of multi-material structures using a versatile self-piercing riveting process. Production Engineering.https://doi.org/10.1007/s11740-022-01151-w 
LibreCat: /record/34241
DOI: 10.1007/s11740-022-01151-w

Zirngibl, C., Kügler, P., Popp, J., Bielak, C. R., Bobbert, M., Drummer, D., Meschut, G., Wartzack, S., &; Schleich, B. (2022). Provision of cross-domain knowledge in mechanical joining using ontologies. Production Engineering.https://doi.org/10.1007/s11740-022-01117-y 
LibreCat: /record/30100
DOI: 10.1007/s11740-022-01117-y

Kappe, F., Wituschek, S., de Pascalis, V., Bobbert, M., Lechner, M., &; Meschut, G. (2022). Numerical Investigation of the Influence of a Movable Die Base on Joint Formation in Semi-tubular Self-piercing Riveting. In Materials Design and Applications IV. Springer International Publishing.https://doi.org/10.1007/978-3-031-18130-6_10 
LibreCat: /record/34275
DOI: 10.1007/978-3-031-18130-6_10

Kappe, F., Zirngibl, C., Schleich, B., Bobbert, M., Wartzack, S., &; Meschut, G. (2022). Determining the influence of different process parameters on the versatile self-piercing riveting process using numerical methods. Journal of Manufacturing Processes, 84, 1438–1448.https://doi.org/10.1016/j.jmapro.2022.11.019 
LibreCat: /record/34244
DOI: 10.1016/j.jmapro.2022.11.019

Kappe, F., Schadow, L., Bobbert, M., &; Meschut, G. (2022). Increasing flexibility of self-piercing riveting by reducing tool–geometry combinations using cluster analysis in the application of multi-material design. Proceedings of the Institution of Mechanical Engineers Part L Journal of Materials Design and Applications.https://doi.org/10.1177/14644207211070992 
LibreCat: /record/29858
DOI: 10.1177/14644207211070992

Kappe, F., Wituschek, S., Bobbert, M., &; Meschut, G. (2022). Determining the properties of multirange semitubular selfpiercing riveted joints. Production Engineering.https://doi.org/10.1007/s11740-022-01105-2 
LibreCat: /record/29857
DOI: https://doi.org/10.1007/s11740-022-01105-2

Schramm, B., &; Weiß, D. (2022). Fracture mechanical evaluation of the material HX. Materials Testing, 64(10), 1437–1449.https://doi.org/10.1515/mt-2022-0191 
LibreCat: /record/34403
DOI: 10.1515/mt-2022-0191

Bielak, C. R., Böhnke, M., Bobbert, M., &; Meschut, G. (2022). Development of a Numerical 3D Model for Analyzing Clinched Joints in Versatile Process Chains. In The Minerals, Metals &;amp; Materials Series. Springer International Publishing.https://doi.org/10.1007/978-3-031-06212-4_15 
LibreCat: /record/34210
DOI: 10.1007/978-3-031-06212-4_15

Bielak, C. R., Böhnke, M., Bobbert, M., &; Meschut, G. (2022). Numerical investigation of a friction  test to determine the friction  coefficients for the clinching process. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, Article 146442072210934.https://doi.org/10.1177/14644207221093468 
LibreCat: /record/30962
DOI: 10.1177/14644207221093468

Schramm, B., Martin, S., Steinfelder, C., Bielak, C. R., Brosius, A., Meschut, G., Tröster, T., Wallmersperger, T., &; Mergheim, J. (2022). A Review on the Modeling of the Clinching Process Chain - Part I: Design Phase. Journal of Advanced Joining Processes, 6, Article 100133.https://doi.org/10.1016/j.jajp.2022.100133 
LibreCat: /record/34069
DOI: 10.1016/j.jajp.2022.100133

Schramm, B., Friedlein, J., Gröger, B., Bielak, C. R., Bobbert, M., Gude, M., Meschut, G., Wallmersperger, T., &; Mergheim, J. (2022). A Review on the Modeling of the Clinching Process Chain - Part II: Joining Process. Journal of Advanced Joining Processes, Article 100134.https://doi.org/10.1016/j.jajp.2022.100134 
LibreCat: /record/34068
DOI: 10.1016/j.jajp.2022.100134

Martin, S., Bielak, C. R., Bobbert, M., Tröster, T., &; Meschut, G. (2022). Numerical investigation of the clinched joint loadings considering the initial pre-strain in the joining area. Production Engineering.https://doi.org/10.1007/s11740-021-01103-w 
LibreCat: /record/29951
DOI: 10.1007/s11740-021-01103-w

Martin, S., Kurtusic, K., &; Tröster, T. (2022). Influence of the Surrounding Sheet Geometry on a Clinched Joint. Key Engineering Materials, 927.https://doi.org/Â  https://doi.org/10.4028/p-09md1c 
LibreCat: /record/32813
DOI:   https://doi.org/10.4028/p-09md1c

Köhler, D., Stephan, R., Kupfer, R., Troschitz, J., Brosius, A., &; Gude, M. (2022). Investigations on Combined &;lt;i&;gt;In Situ&;lt;/i&;gt; CT and Acoustic Analysis during Clinching. Key Engineering Materials, 926, 1489–1497.https://doi.org/10.4028/p-32330d 
LibreCat: /record/51197
DOI: 10.4028/p-32330d

Busch, M., Köhler, D., Hausotte, T., Kupfer, R., Troschitz, J., &; Gude, M. (2022). Approach to Determine the Characteristic Dimensions of Clinched Joints by Industrial X-ray Computed Tomography. E-Journal of Nondestructive Testing, 27(12).https://doi.org/10.58286/27519 
LibreCat: /record/51192
DOI: 10.58286/27519

Köhler, D., Kupfer, R., Troschitz, J., &; Gude, M. (2022). Untersuchung zum Einfluss radioopaker Zwischenschichten bei der in-situ CT geclinchter Verbindungen. In M. Zimmermann (Ed.), Tagungsband zur Werkstoffprüfung 2022.
LibreCat: /record/51191

Köhler, D., Kupfer, R., Troschitz, J., &; Gude, M. (2022). Clinching in In Situ CT—A Novel Validation Method for Mechanical Joining Processes. In The Minerals, Metals &;amp; Materials Series. Springer International Publishing.https://doi.org/10.1007/978-3-031-06212-4_75 
LibreCat: /record/51195
DOI: 10.1007/978-3-031-06212-4_75

Neuser, M., Böhnke, M., Grydin, O., Bobbert, M., Schaper, M., &; Meschut, G. (2022). Influence of heat treatment on the suitability for clinching of the aluminium casting alloy AlSi9. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, Article 146442072210758.https://doi.org/10.1177/14644207221075838 
LibreCat: /record/29724
DOI: 10.1177/14644207221075838

Neuser, M., Grydin, O., Frolov, Y., &; Schaper, M. (2022). Influence of solidification rates and heat treatment on the mechanical performance and joinability of the cast aluminium alloy AlSi10Mg. Production Engineering.https://doi.org/10.1007/s11740-022-01106-1 
LibreCat: /record/29505
DOI: 10.1007/s11740-022-01106-1

Kupfer, R., Köhler, D., Römisch, D., Wituschek, S., Ewenz, L., Kalich, J., Weiß, D., Sadeghian, B., Busch, M., Krüger, J., Neuser, M., Grydin, O., Böhnke, M., Bielak, C. R., &; Troschitz, J. (2022). Clinching of Aluminum Materials – Methods for the Continuous Characterization of Process, Microstructure and Properties. Journal of Advanced Joining Processes, 5, Article 100108.https://doi.org/10.1016/j.jajp.2022.100108 
LibreCat: /record/31828
DOI: 10.1016/j.jajp.2022.100108

Grydin, O., Mortensen, D., Neuser, M., Lindholm, D., Fjaer, H. G., &; Schaper, M. (2022). Numerical and Experimental Investigation of Heat Transfer in the Solidification-Deformation Zone During Twin-Roll Casting of Aluminum Strips. In Light Metals 2022. Springer International Publishing.https://doi.org/10.1007/978-3-030-92529-1_96 
LibreCat: /record/29771
DOI: 10.1007/978-3-030-92529-1_96

Kupfer, R., Köhler, D., Römisch, D., Wituschek, S., Ewenz, L., Kalich, J., Weiß, D., Sadeghian, B., Busch, M., Krüger, J. T., Neuser, M., Grydin, O., Böhnke, M., Bielak, C. R., &; Troschitz, J. (2022). Clinching of Aluminum Materials – Methods for the Continuous Characterization of Process, Microstructure and Properties. Journal of Advanced Joining Processes, 5, Article 100108.https://doi.org/10.1016/j.jajp.2022.100108 
LibreCat: /record/34215
DOI: 10.1016/j.jajp.2022.100108

Friedlein, J., Wituschek, S., Lechner, M., Mergheim, J., &; Steinmann, P. (2021). Inverse parameter identification of an anisotropic plasticity model for sheet metal. IOP Conference Series: Materials Science and Engineering, 1157, 012004.https://doi.org/10.1088/1757-899X/1157/1/012004 
LibreCat: /record/30647
DOI: 10.1088/1757-899X/1157/1/012004

Popp, J., Wolf, M., Mattner, T., &; Drummer, D. (2021). Energy direction in ultrasonic impregnation of continuous fiber-reinforced thermoplastics. Journal of Composites Science, 5, 239.https://doi.org/10.3390/jcs5090239 
LibreCat: /record/30645
DOI: 10.3390/jcs5090239

Kalich, J., &; Füssel, U. (2021). Influence of the production process on the binding mechanism of clinched aluminum steel mixed compounds. Journal of Manufacturing and Materials Processing, 5, 105.https://doi.org/10.3390/jmmp5040105 
LibreCat: /record/30643
DOI: 10.3390/jmmp5040105

Pivovarov, D., Mergheim, J., Willner, K., &; Steinmann, P. (2021). Stochastic local FEM for computational homogenization of heterogeneous materials exhibiting large plastic deformations. Computational Mechanics.https://doi.org/10.1007/s00466-021-02099-x 
LibreCat: /record/30644
DOI: 10.1007/s00466-021-02099-x

Friedlein, J., Mergheim, J., &; Steinmann, P. (2021). Anisotropic plasticitydamage material model for sheet metal — Regularised single surface formulation. PAMM, 21.https://doi.org/10.1002/pamm.202100068 
LibreCat: /record/30642
DOI: 10.1002/pamm.202100068

Bielak, C. R., Böhnke, M., Bobbert, M., &; Meschut, G. (n.d.). Further development of a numerical method for analyzing the load capacity of clinched joints in versatile process chains. ESAFORM 2021, Lüttich.https://doi.org/10.25518/esaform21.4298 
LibreCat: /record/20807
DOI: 10.25518/esaform21.4298

Römisch, D., Zirngibl, C., Schleich, B., Wartzack, S., &; Merklein, M. (2021). Data-driven analysis of cold-formed pin structure characteristics in the context of versatile joining processes. IOP Conference Series: Materials Science and Engineering, 1157, 012077.https://doi.org/10.1088/1757-899X/1157/1/012077 
LibreCat: /record/30650
DOI: 10.1088/1757-899X/1157/1/012077

Steinfelder, C., Kalich, J., Brosius, A., &; Füssel, U. (2021). Numerical and experimental investigation of the transmission moment of clinching points. IOP Conference Series: Materials Science and Engineering, 1157, 012003.https://doi.org/10.1088/1757-899x/1157/1/012003 
LibreCat: /record/30648
DOI: 10.1088/1757-899x/1157/1/012003

Popp, J., Kleffel, T., Römisch, D., Papke, T., Merklein, M., &; Drummer, D. (2021). Fiber Orientation Mechanism of Continuous Fiber Reinforced Thermoplastics Hybrid Parts Joined with Metallic Pins. Applied Composite Materials, 28, 951–972.https://doi.org/10.1007/s10443-021-09892-0 
LibreCat: /record/30653
DOI: 10.1007/s10443-021-09892-0

Gröger, B., Troschitz, J., Vorderbrüggen, J., Vogel, C., Kupfer, R., Meschut, G., &; Gude, M. (2021). Clinching of Thermoplastic Composites and Metals—A Comparison of Three Novel Joining Technologies. Materials, 14, 2286.https://doi.org/10.3390/ma14092286X 
LibreCat: /record/30652
DOI: 10.3390/ma14092286X

Busch, M., &; Hausotte, T. (2021). Determination of the Interface Structural Resolution of an Industrial X-Ray Computed Tomograph Using a Spherical Specimen and a Gap Specimen Consisting of Gauge Blocks. Key Engineering Materials, 883, 41–48.https://doi.org/10.4028/www.scientific.net/kem.883.41 
LibreCat: /record/30662
DOI: 10.4028/www.scientific.net/kem.883.41

Köhler, D., Kupfer, R., Troschitz, J., &; Gude, M. (2021). Clinching in In-situ CT – Experimental Study on Suitable Tool Materials. ESAFORM 2021.https://doi.org/10.25518/esaform21.2781 
LibreCat: /record/30659
DOI: 10.25518/esaform21.2781

Köhler, D., Kupfer, R., Troschitz, J., &; Gude, M. (2021). In Situ Computed Tomography—Analysis of a Single-Lap Shear Test with Clinch Points. Materials, 14, 1859.https://doi.org/10.3390/ma14081859 
LibreCat: /record/30661
DOI: 10.3390/ma14081859

Wituschek, S., &; Lechner, M. (2021). Friction Characterisation for a Tumbling Self-Piercing Riveting Process. Key Engineering Materials, 883, 27–34.https://doi.org/10.4028/www.scientific.net/kem.883.27 
LibreCat: /record/30719
DOI: 10.4028/www.scientific.net/kem.883.27

Wischer, C., Steinfelder, C., Homberg, W., &; Brosius, A. (2021). Joining with Friction Spun Joint Connectors – Manufacturing and Analysis. IOP Conference Series: Materials Science and Engineering, 1157, 012007.https://doi.org/10.1088/1757-899x/1157/1/012007 
LibreCat: /record/30649
DOI: 10.1088/1757-899x/1157/1/012007

Wischer, C., &; Homberg, W. (2021). A contribution on versatile process chains: joining with adaptive joining elements, formed by friction spinning. Production Engineering.https://doi.org/10.1007/s11740-021-01094-8 
LibreCat: /record/30702
DOI: 10.1007/s11740-021-01094-8

Weiß, D., Schramm, B., &; Kullmer, G. (2021). Numerical and Experimental Fracture Mechanical Investigations of Clinchable Sheet Metals Made of HX. Key Engineering Materials, 883, 127–132.https://doi.org/10.4028/www.scientific.net/kem.883.127 
LibreCat: /record/30680
DOI: 10.4028/www.scientific.net/kem.883.127

Gröger, B., Köhler, D., Vorderbrüggen, J., Troschitz, J., Kupfer, R., Meschut, G., &; Gude, M. (2021). Computed tomography investigation of the material structure in clinch joints in aluminium fibre-reinforced thermoplastic sheets. Production Engineering.https://doi.org/10.1007/s11740-021-01091-x 
LibreCat: /record/30698
DOI: 10.1007/s11740-021-01091-x

Weiß, D., Schramm, B., &; Kullmer, G. (2021). Holistic investigation chain for the experimental determination of fracture mechanical material parameters with special specimens. Production Engineering.https://doi.org/10.1007/s11740-021-01096-6 
LibreCat: /record/30699
DOI: 10.1007/s11740-021-01096-6

Zirngibl, C., Schleich, B., &; Wartzack, S. (2021). Approach for the automated and data-based design of mechanical joints. Proceedings of the Design Society, 1, 521.https://doi.org/10.1017/pds.2021.52 
LibreCat: /record/30696
DOI: 10.1017/pds.2021.52

Zirngibl, C., Dworschak, F., Schleich, B., &; Wartzack, S. (2021). Application of reinforcement learning for the optimization of clinch joint characteristics. Production Engineering.https://doi.org/10.1007/s11740-021-01098-4 
LibreCat: /record/30700
DOI: 10.1007/s11740-021-01098-4

Römisch, D., Popp, J., Drummer, D., &; Merklein, M. (2021). Joining of CFRT-steel hybrid parts via hole-forming and subsequent pin caulking. Production Engineering.https://doi.org/10.1007/s11740-021-01093-9 
LibreCat: /record/30701
DOI: 10.1007/s11740-021-01093-9

Lafarge, R., Wolf, A., Guilleaume, C., &; Brosius, A. (2021). A New Non-destructive Testing Method Applied to Clinching. Minerals, Metals and Materials Series, 1461.https://doi.org/10.1007/978-3-030-75381-8_121 
LibreCat: /record/30697
DOI: 10.1007/978-3-030-75381-8_121

Römisch, D., Kraus, M., &; Merklein, M. (2021). Experimental study on joining by forming of hct590x + z and en-aw 6014 sheets using cold extruded pin structures. Journal of Manufacturing and Materials Processing, 5, 25.https://doi.org/10.3390/jmmp5010025 
LibreCat: /record/30684
DOI: 10.3390/jmmp5010025

Römisch, D., Kraus, M., &; Merklein, M. (2021). Investigation of Different Joining by Forming Strategies when Connecting Different Metals without Auxiliary Elements. Key Engineering Materials, 883, 19–26.https://doi.org/10.4028/www.scientific.net/kem.883.19 
LibreCat: /record/30682
DOI: 10.4028/www.scientific.net/kem.883.19

Wituschek, S., &; Lechner, M. (2021). Material characterisation methods for a tumbling self-piercing riveting process. ESAFORM 2021.https://doi.org/10.25518/esaform21.398 
LibreCat: /record/30718
DOI: 10.25518/esaform21.398

Köhler, D., Sadeghian, B., Kupfer, R., Troschitz, J., Gude, M., &; Brosius, A. (2021). A Method for Characterization of Geometric Deviations in Clinch Points with Computed Tomography and Transient Dynamic Analysis. Key Engineering Materials, 883, 89–96.https://doi.org/10.4028/www.scientific.net/kem.883.89 
LibreCat: /record/30683
DOI: 10.4028/www.scientific.net/kem.883.89

Ewenz, L., Kalich, J., Zimmermann, M., &; Füssel, U. (2021). Effect of Different Tool Geometries on the Mechanical Properties of Al-Al Clinch Joints. Key Engineering Materials, 883, 65–72.https://doi.org/10.4028/www.scientific.net/kem.883.65 
LibreCat: /record/30663
DOI: 10.4028/www.scientific.net/kem.883.65

Gröger, B., Hornig, A., Hoog, A., &; Gude, M. (2021). Modelling of thermally supported clinching of fibre-reinforced thermoplastics: Approaches on mesoscale considering large deformations and fibre failure. ESAFORM 2021 - 24th International Conference on Material Forming.https://doi.org/10.25518/esaform21.4293 
LibreCat: /record/30688
DOI: 10.25518/esaform21.4293

Wiens, E., Wischer, C., &; Homberg, W. (2021). Development of a novel adaptive joining technology employing friction-spun joint connectors (FSJC). ESAFORM, 4682.https://doi.org/10.25518/esaform21.4682 
LibreCat: /record/30685
DOI: 10.25518/esaform21.4682

Harzheim, S., Steinfelder, C., Wallmersperger, T., &; Brosius, A. (2021). A First Approach for the Treatment of Galvanic Corrosion and of Load-Bearing Capacity of Clinched Joints. Key Engineering Materials, 883, 97–104.https://doi.org/10.4028/www.scientific.net/kem.883.97 
LibreCat: /record/30664
DOI: 10.4028/www.scientific.net/kem.883.97

Friedlein, J., Mergheim, J., &; Steinmann, P. (2021). A finite plasticity gradient-damage model for sheet metals during forming and clinching. Key Engineering Materials, 883 KEM, 57.https://doi.org/10.4028/www.scientific.net/KEM.883.57 
LibreCat: /record/30694
DOI: 10.4028/www.scientific.net/KEM.883.57

Gröger, B., Hornig, A., Hoog, A., &; Gude, M. (2021). Temperature dependent modelling of fibre-reinforced thermoplastic organo-sheet material for forming and joining process simulations. Key Engineering Materials, 883 KEM, 49.https://doi.org/10.4028/www.scientific.net/KEM.883.49 
LibreCat: /record/30689
DOI: 10.4028/www.scientific.net/KEM.883.49

Hofmann, M., Shi, Y., &; Wallmersperger, T. (2021). A first Model of Fatigue Corrosion of a Metal through Hydrogen Embrittlement. PAMM, 20.https://doi.org/10.1002/pamm.202000122 
LibreCat: /record/30720
DOI: 10.1002/pamm.202000122

Zirngibl, C., &; Schleich, B. (2021). Approach for the automated analysis of geometrical clinch joint characteristics. Key Engineering Materials, 883 KEM, 105.https://doi.org/10.4028/www.scientific.net/KEM.883.105 
LibreCat: /record/30695
DOI: 10.4028/www.scientific.net/KEM.883.105

Pivovarov, D., Mergheim, J., Willner, K., &; Steinmann, P. (2021). Parametric FEM for computational homogenization of heterogeneous materials with random voids. PAMM, 20(1).https://doi.org/10.1002/pamm.202000071 
LibreCat: /record/34208
DOI: 10.1002/pamm.202000071

Böhnke, M., Rossel, M. S., Bielak, C. R., Bobbert, M., &; Meschut, G. (2021). Concept development of a method for identifying friction coefficients for the numerical simulation of clinching processes. The International Journal of Advanced Manufacturing Technology.https://doi.org/10.1007/s00170-021-07986-4 
LibreCat: /record/25556
DOI: 10.1007/s00170-021-07986-4

Popp, J., Kleffel, T., &; Drummer, D. (2021). Influence of pin geometry on the joint strength of CFRT-metal hybrid parts with metallic pins. Joining Plastics, 15(3–4).
LibreCat: /record/38517

Kullmer, G., Weiß, D., &; Schramm, B. (2021). Entwicklung einer Methode zur differenzierten Messung des Wachstums der Rissenden von Innenrissen mit der Elektropotentialmethode. DVM-Bericht 253, 107–116.https://doi.org/10.48447/BR-2021-013 
LibreCat: /record/34472
DOI: 10.48447/BR-2021-013

Weiß, D., Schramm, B., Neuser, M., Grydin, O., &; Kullmer, G. (2021). Experimentelle bruchmechanische Untersuchung eines clinchgeeigneten Bleches aus HX mithilfe einer neuen Probengeometrie. DVM-Bericht 253, 231–240.https://doi.org/10.48447/BR-2021-025 
LibreCat: /record/24006
DOI: 10.48447/BR-2021-025

Rossel, M. S., Böhnke, M., Bielak, C. R., Bobbert, M., &; Meschut, G. (2021). Development of a Method for the Identification of Friction Coefficients in Sheet Metal Materials for the Numerical Simulation of Clinching Processes. Key Engineering Materials, 883, 81–88.https://doi.org/10.4028/www.scientific.net/kem.883.81 
LibreCat: /record/34227
DOI: 10.4028/www.scientific.net/kem.883.81

Kappe, F., Bielak, C. R., Sartisson, V., Bobbert, M., &; Meschut, G. (2021). Influence of rivet length on joint formation on self-piercing riveting process considering further process parameters. ESAFORM 2021.https://doi.org/10.25518/esaform21.4277 
LibreCat: /record/34222
DOI: 10.25518/esaform21.4277

Böhnke, M., Kappe, F., Bobbert, M., &; Meschut, G. (2021). Influence of various procedures for the determination of flow curves on the predictive accuracy of numerical simulations for mechanical joining processes. Materials Testing, 63(6), 493–500.https://doi.org/10.1515/mt-2020-0082 
LibreCat: /record/22798
DOI: 10.1515/mt-2020-0082

Kappe, F., Bobbert, M., &; Meschut, G. (2021). New Approach for Versatile Self Piercing Riveting: Joining System and Auxiliary Part. Key Engineering Materials, 883, 3–10.https://doi.org/10.4028/www.scientific.net/kem.883.3 
LibreCat: /record/34226
DOI: 10.4028/www.scientific.net/kem.883.3

Wituschek, S., Kappe, F., &; Lechner, M. (2021). Investigation of the influence of varying tumbling strategies on a tumbling self-piercing riveting process. Production Engineering.https://doi.org/10.1007/s11740-021-01099-3 
LibreCat: /record/30200
DOI: 10.1007/s11740-021-01099-3

Steinfelder, C., Martin, S., Brosius, A., &; Tröster, T. (2021). Load Path Transmission in Joining Elements. Key Engineering Materials, 73–80.https://doi.org/10.4028/www.scientific.net/kem.883.73 
LibreCat: /record/24541
DOI: 10.4028/www.scientific.net/kem.883.73

Martin, S., &; Tröster, T. (2021). Joint point loadings in car bodies – the influence of manufacturing tolerances and scatter in material properties. ESAFORM 2021.https://doi.org/10.25518/esaform21.3801 
LibreCat: /record/24548
DOI: 10.25518/esaform21.3801

Wischer, C., Wiens, E., &; Homberg, W. (2021). Joining with versatile joining elements formed by friction spinning. Journal of Advanced Joining Processes, 3, Article 100060.https://doi.org/10.1016/j.jajp.2021.100060 
LibreCat: /record/26082
DOI: 10.1016/j.jajp.2021.100060

Köhler, D., Sadeghian, B., Kupfer, R., Troschitz, J., Gude, M., &; Brosius, A. (2021). A Method for Characterization of Geometric Deviations in Clinch Points with Computed Tomography and Transient Dynamic Analysis. Key Engineering Materials, 883, 89–96.https://doi.org/10.4028/www.scientific.net/kem.883.89 
LibreCat: /record/51202
DOI: 10.4028/www.scientific.net/kem.883.89

Gröger, B., Köhler, D., Vorderbrüggen, J., Troschitz, J., Kupfer, R., Meschut, G., &; Gude, M. (2021). Computed tomography investigation of the material structure in clinch joints in aluminium fibre-reinforced thermoplastic sheets. Production Engineering, 16(2–3), 203–212.https://doi.org/10.1007/s11740-021-01091-x 
LibreCat: /record/51199
DOI: 10.1007/s11740-021-01091-x

Köhler, D., Kupfer, R., Troschitz, J., &; Gude, M. (2021). In Situ Computed Tomography—Analysis of a Single-Lap Shear Test with Clinch Points. Materials, 14(8), Article 1859.https://doi.org/10.3390/ma14081859 
LibreCat: /record/51200
DOI: 10.3390/ma14081859

Köhler, D., Kupfer, R., Troschitz, J., &; Gude, M. (2021). Clinching in In-situ CT – Experimental Study on Suitable Tool Materials. ESAFORM 2021.https://doi.org/10.25518/esaform21.2781 
LibreCat: /record/51201
DOI: 10.25518/esaform21.2781

Köhler, D., Sadeghian, B., Troschitz, J., Kupfer, R., Gude, M., &; Brosius, A. (2021). Characterisation of lateral offsets in clinch points with computed tomography and transient dynamic analysis. Journal of Advanced Joining Processes, 5, Article 100089.https://doi.org/10.1016/j.jajp.2021.100089 
LibreCat: /record/51198
DOI: 10.1016/j.jajp.2021.100089

Martin, S., Schütte, J., Bäumler, C., Sextro, W., &; Tröster, T. (2021). Identification of joints for a load-adapted shape in a body in white using steady state vehicle simulations. Forces in Mechanics, 6, Article 100065.https://doi.org/10.1016/j.finmec.2021.100065 
LibreCat: /record/29293
DOI: 10.1016/j.finmec.2021.100065

Neuser, M., Grydin, O., Andreiev, A., &; Schaper, M. (2021). Effect of Solidification Rates at Sand Casting on the Mechanical Joinability of a Cast Aluminium Alloy. Metals, Article 1304.https://doi.org/10.3390/met11081304 
LibreCat: /record/24535
DOI: 10.3390/met11081304

Neuser, M., Kappe, F., Busch, M., Grydin, O., Bobbert, M., Schaper, M., Meschut, G., &; Hausotte, T. (2021). Joining suitability of cast aluminium for self-piercing riveting. IOP Conference Series: Materials Science and Engineering, Article 012005.https://doi.org/10.1088/1757-899x/1157/1/012005 
LibreCat: /record/24537
DOI: 10.1088/1757-899x/1157/1/012005

Bielak, C. R., Böhnke, M., Beck, R., Bobbert, M., &; Meschut, G. (2020). Numerical analysis of the robustness of clinching process considering the pre-forming of the parts . Journal of Advanced Joining Processes. .https://doi.org/10.1016/j.jajp.2020.100038 
LibreCat: /record/20678
DOI: https://doi.org/10.1016/j.jajp.2020.100038

Steinfelder, C., &; Brosius, A. (2020). A New Approach for the Evaluation of Component and Joint Loads Based on Load Path Analysis. Lecture Notes in Production Engineering, 134–141.https://doi.org/10.1007/978-3-662-62138-7_14 
LibreCat: /record/30706
DOI: 10.1007/978-3-662-62138-7_14

Böhm, H., Zhang, H., Gröger, B., Hornig, A., &; Gude, M. (2020). Characterization and Numerical Modelling of Through-Thickness Metallic-Pin-Reinforced Fibre/Thermoplastic Composites under Bending Loading. Journal of Composites Science, 4, 188.https://doi.org/10.3390/jcs4040188 
LibreCat: /record/30704
DOI: 10.3390/jcs4040188

Sadeghian, B., Guilleaume, C., Lafarge, R., &; Brosius, A. (2020). Investigation of Clinched Joints – A Finite Element Simulation of a Non-destructive Approach. Lecture Notes in Production Engineering, 116–124.https://doi.org/10.1007/978-3-662-62138-7_12 
LibreCat: /record/30707
DOI: 10.1007/978-3-662-62138-7_12

Ewenz, L., Schettler, S., Zeuner, A. T., &; Zimmermann, M. (2020). Untersuchungen zum Einfluss von Geometrieparametern bei artgleichen Al-Clinchverbindungen auf das Ermüdungsverhalten im Bereich hoher bis sehr hoher Lastspielzahlen. Tagung Werkstoffprüfung 2020. Werkstoffe Und Bauteile Auf Dem Prüfstand. Prüftechnik - Kennwertermit.https://doi.org/10.48447/WP-2020-039 
LibreCat: /record/30711
DOI: 10.48447/WP-2020-039

Grydin, O., Stolbchenko, M., &; Schaper, M. (2020). Influence of Nozzle Shape on Near-Surface Segregation Formation During Twin-Roll Casting of Aluminum Strips. In Light Metals 2020 (pp. 1039–1044).https://doi.org/10.1007/978-3-030-36408-3_141 
LibreCat: /record/24575
DOI: 10.1007/978-3-030-36408-3_141

Köhler, D., Gröger, B., Kupfer, R., Hornig, A., &; Gude, M. (2020). Experimental and Numerical Studies on the Deformation of a Flexible Wire in an Injection Moulding Process. Procedia Manufacturing, 47, 940–947.https://doi.org/10.1016/j.promfg.2020.04.288 
LibreCat: /record/30712
DOI: 10.1016/j.promfg.2020.04.288

Zirngibl, C., Schleich, B., &; Wartzack, S. (2020). Potentiale datengestützter Methoden zur Gestaltung und Optimierung mechanischer Fügeverbindungen. Proceedings of the 31st Symposium Design for X (D).https://doi.org/10.35199/dfx2020.8 
LibreCat: /record/30710
DOI: 10.35199/dfx2020.8

Köhler, D., Kupfer, R., &; Gude, M. (2020). Clinching in in-situ CT—A numerical study on suitable tool materials. Journal of Advanced Joining Processes, 2, 100034.https://doi.org/10.1016/j.jajp.2020.100034 
LibreCat: /record/30709
DOI: 10.1016/j.jajp.2020.100034

Kraus, M., &; Merklein, M. (2020). Potential of Joining Dissimilar Materials by Cold Formed Pin-Structures. Journal of Materials Processing Technology, 283, 116697.https://doi.org/10.1016/j.jmatprotec.2020.116697 
LibreCat: /record/30703
DOI: 10.1016/j.jmatprotec.2020.116697

Bielak, C. R., Böhnke, M., Bobbert, M., &; Meschut, G. (n.d.). Development of a numerical method for analyzing the robustness of clinching in versatile process chains. Material Science and Engineering Congress - MSE 2020, Darmstadt.
LibreCat: /record/20344

Wituschek, S., Kuball, C. M., Merklein, M., &; Lechner, M. (2020). Test Method for Friction Characterization of Rivets. Defect and Diffusion Forum, 404, 132–137.https://doi.org/10.4028/www.scientific.net/ddf.404.132 
LibreCat: /record/30721
DOI: 10.4028/www.scientific.net/ddf.404.132

Weiß, D., Schramm, B., &; Kullmer, G. (2020). Development of a special specimen geometry for the experimental determination of fracture mechanical parameters of clinchable metal sheets (Vol. 28, pp. 2335–2341). Elsevier.https://doi.org/10.1016/j.prostr.2020.11.081 
LibreCat: /record/23980
DOI: 10.1016/j.prostr.2020.11.081

Weiß, D., Schramm, B., &; Kullmer, G. (2020). Experimental and numerical preliminary investigations of the base material and preformed components regarding fatigue crack growth in joined structures. Material Science and Engineering Congress - M, Darmstadt.
LibreCat: /record/23982

Kappe, F., Wituschek, S., Lechner, M., Bobbert, M., Meschut, G., &; Merklein, M. (2020). Investigation of influencing parameters on the joint formation of the self-piercing riveting process. Material Science and Engineering Congress - MSE 2020, Darmstadt .
LibreCat: /record/20680

Martin, S., Camberg, A. A., &; Tröster, T. (2020). Probability Distribution of Joint Point Loadings in Car Body Structures under Global Bending and Torsion. Procedia Manufacturing, 419–424.https://doi.org/10.1016/j.promfg.2020.04.324 
LibreCat: /record/16859
DOI: 10.1016/j.promfg.2020.04.324

Rostek, T., Wiens, E., &; Homberg, W. (2020). Joining with Versatile Friction-Spun Joint Connectors. Procedia Manufacturing, 47, 395–399.https://doi.org/10.1016/j.promfg.2020.04.313 
LibreCat: /record/30713
DOI: 10.1016/j.promfg.2020.04.313

Köhler, D., Kupfer, R., &; Gude, M. (2020). Clinching in in-situ CT—A numerical study on suitable tool materials. Journal of Advanced Joining Processes, 2, Article 100034.https://doi.org/10.1016/j.jajp.2020.100034 
LibreCat: /record/51203
DOI: 10.1016/j.jajp.2020.100034

Kraus, M., Frey, P., Kleffel, T., Drummer, D., &; Merklein, M. (2019). Mechanical joining without auxiliary element by cold formed pins for multi-material-systems. AIP Conference Proceedings, 2113, 050006.https://doi.org/10.1063/1.5112570 
LibreCat: /record/30716
DOI: 10.1063/1.5112570