Kullmer, Gunter, et al. “An Alternative and Robust Formulation of the Fatigue Crack Growth Rate Curve for Long Cracks.”10.1016/j.engfracmech.2023.109826__Engineering Fracture Mechanics, vol. 296, 109826, Elsevier BV, 2024, doi:10.1016/j.engfracmech.2023.109826.

Kullmer, Gunter, et al. Weiterentwicklung des Exponentialansatzes zur Beschreibung von Rissfortschrittskurven. Deutscher Verband für Materialforschung und –prüfung e.V., 2024, doi:10.48447/BR-2024-369.

Busch, Matthias, and Tino Hausotte. “Simulation-Based Investigation of the Metrological Interface Structural Resolution Capability of X-Ray Computed Tomography Scanners.”10.5194/jsss-12-1-2023__Journal of Sensors and Sensor Systems, vol. 12, no. 1, Copernicus GmbH, 2023, pp. 1–8, doi:10.5194/jsss-12-1-2023.

Brosius, Alexander, et al. “Anrisserkennung an Geclinchten Proben Während Einer Zyklischen Belastung Unter Nutzung Eines Scanning Laser Doppler Vibrometers.” Tagung Werkstoffprüfung 2022, edited by Martina Zimmermann, Deutsche Gesellschaft für Materialkunde e.V. (DGM), 2023.

Ewenz, Lars, et al. “Ableitung Flacher Probengeometrien Zur Abbildung Mehraxialer Spannungszustände in Clinchverbindungen Unter Zyklischer Beanspruchung.” Tagung Werkstoffprüfung 2022, edited by Martina Zimmermann, Deutsche Gesellschaft für Materialkunde e.V. (DGM), 2023.

Ewenz, Lars, et al. “Untersuchungen Zum Geometrie- Und Frequenzeinfluss Bei Der Ermittlung Zyklischer Kennwerte Geclinchter Überlappverbindungen.” Tagung Werkstoffprüfung 2022, edited by Martina Zimmermann, Deutsche Gesellschaft für Materialkunde e.V. (DGM), 2023.

Wituschek, S., et al. “Versatile Self-Piercing Riveting with a Tumbling Superimposed Punch.”10.21741/9781644902479-122__Materials Research Proceedings, Materials Research Forum LLC, 2023, doi:10.21741/9781644902479-122.

Köhler, Daniel, et al. “Comparison of Ex- and in-Situ Investigations of Clinched Single-Lap Shear Specimens.”10.21741/9781644902417-20__Materials Research Proceedings, Materials Research Forum LLC, 2023, doi:10.21741/9781644902417-20.

Köhler, Daniel, et al. “In-Situ Computed Tomography and Transient Dynamic Analysis of a Single-Lap Shear Test with a Composite-Metal Clinch Point.”10.1007/978-3-031-18318-8_28__Lecture Notes in Production Engineering, Springer International Publishing, 2023, doi:10.1007/978-3-031-18318-8_28.

Böhnke, Max, et al. “A Calibration Method for Failure Modeling in Clinching Process Simulations.”10.21741/9781644902417-34__Materials Research Proceedings, Materials Research Forum LLC, 2023, doi:10.21741/9781644902417-34.

Friedlein, Johannes, et al. “Influence of Plastic Orthotropy on Clinching of Sheet Metal.”10.21741/9781644902417-17 __Materials Research Proceedings, Materials Research Forum LLC, 2023, doi:10.21741/9781644902417-17 .

Bielak, Christian Roman, et al. “Numerical Investigation of the Coupled Friction Behavior in the Clinching Process Chain.”10.1007/978-3-031-41341-4_15__Lecture Notes in Mechanical Engineering, Springer Nature Switzerland, 2023, doi:10.1007/978-3-031-41341-4_15.

Butzhammer, Lorenz, et al. “Dynamic Conformity Assessment for Joining Force Monitoring Using Bayes Filters.”10.21741/9781644902417-48__Materials Research Proceedings, Materials Research Forum LLC, 2023, doi:10.21741/9781644902417-48.

Wituschek, Simon, et al. “Combination of Versatile Self-Piercing Riveting Processes.”10.21741/9781644902417-16__Materials Research Proceedings, Materials Research Forum LLC, 2023, doi:10.21741/9781644902417-16.

Weiß, Deborah, et al. Bruchmechanische Untersuchung des Dualphasenstahls HX unter Temperatureinfluss. Deutscher Verband für Materialforschung und -prüfung e.V., 2023, doi:10.48447/WP-2023-244.

Neuser, Moritz, et al. “Mechanical Properties and Joinability of AlSi9 Alloy Manufactured by TwinRoll Casting.”10.1002/adem.202200874__Advanced Engineering Materials, vol. 24, no. 10, 2200874, Wiley, 2022, doi:10.1002/adem.202200874.

Friedlein, Johannes, et al. “Influence of Kinematic Hardening on Clinch Joining of Dual-Phase Steel HX Sheet Metal.”10.1007/978-3-031-06212-4_31__The Minerals, Metals &;amp; Materials Series, Springer International Publishing, 2022, doi:10.1007/978-3-031-06212-4_31.

Ewenz, L., et al. “Numerical and Experimental Identification of Fatigue Crack Initiation Sites in Clinched Joints.”10.1007/s11740-022-01124-z__Production Engineering, vol. 16, no. 2–3, Springer Science and Business Media LLC, 2022, pp. 305–13, doi:10.1007/s11740-022-01124-z.

Köhler, Daniel, et al. “Clinching in In Situ CT—A Novel Validation Method for Mechanical Joining Processes.”10.1007/978-3-031-06212-4_75__The Minerals, Metals &; Materials Series, Springer International Publishing, 2022, doi:10.1007/978-3-031-06212-4_75.

Römisch, David, et al. “Investigation of the Influence of Formed, Non-Rotationally Symmetrical Pin Geometries and Their Effect on the Joint Quality of Steel and Aluminium Sheets by Direct Pin Pressing.”10.1177/14644207221081408__Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, vol. 236, no. 6, SAGE Publications, 2022, pp. 1187–202, doi:10.1177/14644207221081408.

Popp, Julian, et al. “Joining of CFRT/Steel Hybrid Parts via Direct Pressing of Cold Formed Non-Rotational Symmetric Pin Structures.”10.3390/app12104962__Applied Sciences, vol. 12, no. 10, 4962, MDPI AG, 2022, doi:10.3390/app12104962.

Troschitz, Juliane, et al. “Joining Processes for Fibre-Reinforced Thermoplastics: Phenomena and Characterisation.”10.3390/ma15155454__Materials, vol. 15, no. 15, 5454, MDPI AG, 2022, doi:10.3390/ma15155454.

Binder, Felix, and Tino Hausotte. “Über Die Abgrenzung von Auflösungskonzepten in Der Industriellen Computertomografie.”10.1515/teme-2022-0065__Tm - Technisches Messen, vol. 89, no. , Walter de Gruyter GmbH, 2022, pp. 20–24, doi:10.1515/teme-2022-0065.

Busch, Matthias, et al. “Herausforderungen Bei Computertomografischen Untersuchungen von Fügeverbindungen.”10.1515/teme-2022-0061__Tm - Technisches Messen, vol. 89, no. , Walter de Gruyter GmbH, 2022, pp. 83–88, doi:10.1515/teme-2022-0061.

Zirngibl, Christoph, et al. “Knowledge and Data-Based Design and Dimensioning of Mechanical Joining Connections.”10.1115/detc2022-89172__Volume 2: 42nd Computers and Information in Engineering Conference (CIE), American Society of Mechanical Engineers, 2022, doi:10.1115/detc2022-89172.

Zirngibl, Christoph, et al. “Estimation of Clinch Joint Characteristics Based on Limited Input Data Using Pre-Trained Metamodels.”10.3390/ai3040059__AI, vol. 3, no. 4, MDPI AG, 2022, pp. 990–1006, doi:10.3390/ai3040059.

Köhler, D., et al. “Characterisation of Lateral Offsets in Clinch Points with Computed Tomography and Transient Dynamic Analysis.”10.1016/j.jajp.2021.100089__Journal of Advanced Joining Processes, vol. 5, 2022, p. 100089, doi:10.1016/j.jajp.2021.100089.

Popp, J., and D. Drummer. “Joining of Continuous Fiber Reinforced Thermoplastic/Steel Hybrid Parts via Undercutting Pin Structures and Infrared Heating.”10.1016/j.jajp.2021.100084__Journal of Advanced Joining Processes, vol. 5, 2022, p. 100084, doi:10.1016/j.jajp.2021.100084.

Ewenz, L., et al. “Effect of the Tool Geometry on Microstructure and Geometrical Features of Clinched Aluminum.”10.1016/j.jajp.2021.100091__Journal of Advanced Joining Processes, vol. 5, 2022, doi:10.1016/j.jajp.2021.100091.

Gröger, B., et al. “Forming Process Induced Material Structure of Fibre-Reinforced Thermoplastics - Experimental and Numerical Investigation of a Bladder-Assisted Moulding Process.”10.1016/j.jajp.2022.100100__Journal of Advanced Joining Processes, vol. 5, 2022, doi:10.1016/j.jajp.2022.100100.

Wituschek, S., and M. Lechner. “Investigation of the Influence of the Tumbling Angle on a Tumbling Self-Piercing Riveting Process.”10.1177/14644207221080068__Production Engineering, 2022, doi:10.1177/14644207221080068.

Steinfelder, C., et al. “Analysis of the Interactions between Joint and Component Properties during Clinching.”10.1007/s11740-021-01102-x__Production Engineering, 2022, doi:10.1007/s11740-021-01102-x.

Busch, M., and T. Hausotte. “Application of an Edge Detection Algorithm for Surface Determination in Industrial X-Ray Computed Tomography.”10.1007/s11740-021-01100-z__Production Engineering, 2022, doi:10.1007/s11740-021-01100-z.

Kalich, J., and U. Füssel. “Design of Clinched Joints on the Basis of Binding Mechanisms.”10.1007/s11740-022-01108-z__Production Engineering, 2022, doi:10.1007/s11740-022-01108-z.

Friedlein, J., et al. “Observations on Additive Plasticity in the Logarithmic Strain Space at Excessive Strains.”10.1016/j.ijsolstr.2021.111416__International Journal of Solids and Structures, vol. 239–240, 2022, p. 111416, doi:10.1016/j.ijsolstr.2021.111416.

Harzheim, Sven, et al. “Corrosion Phenomena and Fatigue Behavior of Clinched Joints: Numerical and Experimental Investigations.”10.1016/j.jajp.2022.100130__Journal of Advanced Joining Processes, vol. 6, 100130, Elsevier BV, 2022, doi:10.1016/j.jajp.2022.100130.

Zeuner, André Till, et al. “The Influence of Heat Treatment on the Microstructure, Surface Roughness and Shear Tensile Strength of AISI 304 Clinch Joints.”10.3390/met12091514__Metals, vol. 12, no. 9, 1514, MDPI AG, 2022, doi:10.3390/met12091514.

Römisch, David, et al. “Robustness Analysis of Pin Joining.”10.3390/jmmp6050122__Journal of Manufacturing and Materials Processing, vol. 6, no. 5, 122, MDPI AG, 2022, doi:10.3390/jmmp6050122.

Borowski, Andreas, et al. “Characterisation of Fibre Bundle Deformation Behaviour—Test Rig, Results and Conclusions.”10.3390/jmmp6060146__Journal of Manufacturing and Materials Processing, vol. 6, no. 6, 146, MDPI AG, 2022, doi:10.3390/jmmp6060146.

Römisch, David, et al. “Pin Extrusion for Mechanical Joining from Orbital Formed Tailored Blanks with Local Material Pre-Distribution.”10.3390/jmmp6060127__Journal of Manufacturing and Materials Processing, vol. 6, no. 6, 127, MDPI AG, 2022, doi:10.3390/jmmp6060127.

Gröger, Benjamin, et al. “Warmforming Flow Pressing Characteristics of Continuous Fibre Reinforced Thermoplastic Composites.”10.3390/polym14225039__Polymers, vol. 14, no. 22, 5039, MDPI AG, 2022, doi:10.3390/polym14225039.

Gerritzen, Johannes, et al. “A Data Driven Modelling Approach for the Strain Rate Dependent 3D Shear Deformation and Failure of Thermoplastic Fibre Reinforced Composites: Experimental Characterisation and Deriving Modelling Parameters.”10.3390/jcs6100318__Journal of Composites Science, vol. 6, no. 10, 318, MDPI AG, 2022, doi:10.3390/jcs6100318.

Schaude, Janik, and Tino Hausotte. “Atomic Force Microscope with an Adjustable Probe Direction and Integrated Sensing and Actuation.”10.1007/s41871-022-00143-9__Nanomanufacturing and Metrology, vol. 5, no. 2, Springer Science and Business Media LLC, 2022, pp. 139–48, doi:10.1007/s41871-022-00143-9.

Shi, Yuhao, et al. “A Damage Model for Corrosion Fatigue Due to Hydrogen Embrittlement.”10.1007/978-3-030-97675-0_9__Material Modeling and Structural Mechanics, Springer International Publishing, 2022, doi:10.1007/978-3-030-97675-0_9.

Kalich, Jan, et al. “Long-Term Behavior of Clinched Electrical Contacts.”10.3390/met12101651__Metals, vol. 12, no. 10, 1651, MDPI AG, 2022, doi:10.3390/met12101651.

Gröger, Benjamin, et al. “Modelling and Simulation Strategies for Fluid–Structure-Interactions of Highly Viscous Thermoplastic Melt and Single Fibres—A Numerical Study.”10.3390/ma15207241__Materials, vol. 15, no. 20, 7241, MDPI AG, 2022, doi:10.3390/ma15207241.

Harzheim, Sven, et al. “Comparison of Two Mesh-Moving Techniques for Finite Element Simulations of Galvanic Corrosion.”10.1007/s00707-022-03326-z__Acta Mechanica, vol. 233, no. 11, Springer Science and Business Media LLC, 2022, pp. 4427–39, doi:10.1007/s00707-022-03326-z.

Füssel, Uwe, et al. “Electrical Contacting of Aluminum Bus Bars Using Clinching and Functional Elements.”10.3390/engproc2022026005__SFU/ICAFT 2022, MDPI, 2022, doi:10.3390/engproc2022026005.

Köhler, Daniel, et al. “Investigations on Combined in Situ CT and Acoustic Analysis during Clinching.”10.4028/p-32330d__Key Engineering Materials, vol. 926, Trans Tech Publications, Ltd., 2022, pp. 1489–97, doi:10.4028/p-32330d.

Zirngibl, Christoph, et al. “Robust Estimation of Clinch Joint Characteristics Based on Data-Driven Methods.”10.1007/s00170-022-10441-7__The International Journal of Advanced Manufacturing Technology, Springer Science and Business Media LLC, 2022, doi:10.1007/s00170-022-10441-7.

Harzheim, Sven, et al. “Numerical Fatigue Life Prediction of Corroded and Non-Corroded Clinched Joints.”10.1080/15376494.2022.2140233__Mechanics of Advanced Materials and Structures, Informa UK Limited, 2022, pp. 1–6, doi:10.1080/15376494.2022.2140233.

Stephan, Richard, and Alexander Brosius. “Experimental Measurement Method and Evaluation of an Analytical Approach for Sound Conduction through Multiple Clinched Sheets.”10.3390/engproc2022026025__The 28th Saxon Conference on Forming Technology SFU and the 7th International Conference on Accuracy in Forming Technology ICAFT, MDPI, 2022, doi:10.3390/engproc2022026025.

Römisch, David, and Marion Merklein. Experimental and Numerical Analysis of Cold Formed Multi Pin Structures Using a Multi-Acting Tool Design. 2022.

Wituschek, Simon, and Michael Lechner. Versatile Tool Design for a Tumbling Self-Piercing Riveting Process. 2022.

Busch, Matthias, et al. Approach to Determine the Characteristic Dimensions of Clinched Joints by Industrial X-Ray Computed Tomography. 2022.

Butzhammer, Lorenz, et al. “Calibration of 3D Scan Trajectories for an Industrial Computed Tomography Setup with 6-DOF Object Manipulator System Using a Single Sphere.”10.1088/1361-6501/ac9856__Measurement Science and Technology, vol. 34, no. 1, 015403, IOP Publishing, 2022, doi:10.1088/1361-6501/ac9856.

Böhnke, Max, et al. “Functionality Study of an Optical Measurement Concept for Local Force Signal Determination in High Strain Rate Tensile Tests.”10.4028/p-wpuzyw__Key Engineering Materials, vol. 926, Trans Tech Publications, Ltd., 2022, pp. 1564–72, doi:10.4028/p-wpuzyw.

Böhnke, Max, et al. “Development of a Modified Punch Test for Investigating the Failure Behavior in Sheet Metal Materials.”10.1007/978-3-031-06212-4_52__The Minerals, Metals &;amp; Materials Series, Springer International Publishing, 2022, doi:10.1007/978-3-031-06212-4_52.

Böhnke, Max, et al. “Experimental and Numerical Investigation of the Influence of Multiaxial Loading Conditions on the Failure Behavior of Clinched Joints.”10.1177/14644207221145886__Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, SAGE Journals, 2022, doi:10.1177/14644207221145886.

Weiß, Deborah, and Britta Schramm. “Fracture Mechanical Investigation of Preformed Metal Sheets Using a Novel CC-Specimen.”10.1016/j.prostr.2022.12.111__Procedia Structural Integrity, vol. 42, Elsevier BV, 2022, pp. 879–85, doi:10.1016/j.prostr.2022.12.111.

Meschut, Gerson, et al. “Review on Mechanical Joining by Plastic Deformation.”10.1016/j.jajp.2022.100113__Journal of Advanced Joining Processes, vol. 5, 100113, Elsevier BV, 2022, doi:10.1016/j.jajp.2022.100113.

Wituschek, Simon, et al. “Geometric and Mechanical Joint Characterization of Conventionally  and Tumbled Self-Piercing Riveting Joints.”10.1177/14644207221135400__Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 146442072211354, SAGE Publications, 2022, doi:10.1177/14644207221135400.

Neuser, Moritz, et al. “Mechanical Properties and Joinability of AlSi9 Alloy Manufactured by TwinRoll Casting.”10.1002/adem.202200874__Advanced Engineering Materials, vol. 24, no. 10, 2200874, Wiley, 2022, doi:10.1002/adem.202200874.

Oesterwinter, Annika, et al. “Identification of Requirements for FE Modeling of an Adaptive Joining Technology Employing Friction-Spun Joint Connectors (FSJC).”10.3390/met12050869__Metals, vol. 12, no. 5, 869, MDPI AG, 2022, doi:10.3390/met12050869.

Joy, Tintu David, et al. “Further Development of 3D Crack Growth Simulation Program to Include Contact Loading Situations.”10.3390/app12157557__Applied Sciences, vol. 12, no. 15, 7557, MDPI AG, 2022, doi:10.3390/app12157557.

Weiß, Deborah, et al. “Influence of Plane Mixed-Mode Loading on the Kinking Angle of Clinchable Metal Sheets.”10.1016/j.prostr.2022.03.082__Procedia Structural Integrity, vol. 39, Elsevier BV, 2022, pp. 139–47, doi:10.1016/j.prostr.2022.03.082.

Schramm, Britta, et al. “A Review on the Modeling of the Clinching Process Chain - Part III: Operational Phase.”10.1016/j.jajp.2022.100135__Journal of Advanced Joining Processes, 100135, Elsevier BV, 2022, doi:10.1016/j.jajp.2022.100135.

Kullmer, Gunter, et al. “Development of a Method for the Separate Measurement of the Growth of Internal Crack Tips by Means of the Potential Drop Method.”10.1016/j.engfracmech.2022.108899__Engineering Fracture Mechanics, 108899, Elsevier BV, 2022, doi:10.1016/j.engfracmech.2022.108899.

Kappe, Fabian, et al. “Joining of Multi-Material Structures Using a Versatile Self-Piercing Riveting Process.”10.1007/s11740-022-01151-w__Production Engineering, Springer Science and Business Media LLC, 2022, doi:10.1007/s11740-022-01151-w.

Zirngibl, Christoph, et al. “Provision of Cross-Domain Knowledge in Mechanical Joining Using Ontologies.”10.1007/s11740-022-01117-y__Production Engineering, Springer Science and Business Media LLC, 2022, doi:10.1007/s11740-022-01117-y.

Kappe, Fabian, et al. “Numerical Investigation of the Influence of a Movable Die Base on Joint Formation in Semi-Tubular Self-Piercing Riveting.”10.1007/978-3-031-18130-6_10__Materials Design and Applications IV, Springer International Publishing, 2022, doi:10.1007/978-3-031-18130-6_10.

Kappe, Fabian, et al. “Determining the Influence of Different Process Parameters on the Versatile Self-Piercing Riveting Process Using Numerical Methods.”10.1016/j.jmapro.2022.11.019__Journal of Manufacturing Processes, vol. 84, Elsevier BV, 2022, pp. 1438–48, doi:10.1016/j.jmapro.2022.11.019.

Kappe, Fabian, et al. “Increasing Flexibility of Self-Piercing Riveting by Reducing Tool–Geometry Combinations Using Cluster Analysis in the Application of Multi-Material Design.”10.1177/14644207211070992__Proceedings of the Institution of Mechanical Engineers Part L Journal of Materials Design and Applications, 2022, doi:10.1177/14644207211070992.

Kappe, Fabian, et al. “Determining the Properties of Multirange Semitubular Selfpiercing Riveted Joints.”https://doi.org/10.1007/s11740-022-01105-2__Production Engineering, 2022, doi:https://doi.org/10.1007/s11740-022-01105-2.

Schramm, Britta, and Deborah Weiß. “Fracture Mechanical Evaluation of the Material HX.”10.1515/mt-2022-0191__Materials Testing, vol. 64, no. 10, Walter de Gruyter GmbH, 2022, pp. 1437–49, doi:10.1515/mt-2022-0191.

Bielak, Christian Roman, et al. “Development of a Numerical 3D Model for Analyzing Clinched Joints in Versatile Process Chains.”10.1007/978-3-031-06212-4_15__The Minerals, Metals &;amp; Materials Series, Springer International Publishing, 2022, doi:10.1007/978-3-031-06212-4_15.

Bielak, Christian Roman, et al. “Numerical Investigation of a Friction  Test to Determine the Friction  Coefficients for the Clinching Process.”10.1177/14644207221093468__Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 146442072210934, SAGE Publications, 2022, doi:10.1177/14644207221093468.

Schramm, Britta, et al. “A Review on the Modeling of the Clinching Process Chain - Part I: Design Phase.”10.1016/j.jajp.2022.100133__Journal of Advanced Joining Processes, vol. 6, 100133, Elsevier BV, 2022, doi:10.1016/j.jajp.2022.100133.

Schramm, Britta, et al. “A Review on the Modeling of the Clinching Process Chain - Part II: Joining Process.”10.1016/j.jajp.2022.100134__Journal of Advanced Joining Processes, 100134, Elsevier BV, 2022, doi:10.1016/j.jajp.2022.100134.

Martin, Sven, et al. “Numerical Investigation of the Clinched Joint Loadings Considering the Initial Pre-Strain in the Joining Area.”10.1007/s11740-021-01103-w__Production Engineering, Springer Science and Business Media LLC, 2022, doi:10.1007/s11740-021-01103-w.

Martin, Sven, et al. “Influence of the Surrounding Sheet Geometry on a Clinched Joint.”Â  https://doi.org/10.4028/p-09md1c__Key Engineering Materials, vol. 927, 2022, doi:Â  https://doi.org/10.4028/p-09md1c.

Köhler, Daniel, et al. “Investigations on Combined &;lt;I&;gt;In Situ&;lt;/I&;gt; CT and Acoustic Analysis during Clinching.”10.4028/p-32330d__Key Engineering Materials, vol. 926, Trans Tech Publications, Ltd., 2022, pp. 1489–97, doi:10.4028/p-32330d.

Busch, Matthias, et al. “Approach to Determine the Characteristic Dimensions of Clinched Joints by Industrial X-Ray Computed Tomography.”10.58286/27519__E-Journal of Nondestructive Testing, vol. 27, no. 12, NDT.net, 2022, doi:10.58286/27519.

Köhler, Daniel, et al. “Untersuchung zum Einfluss radioopaker Zwischenschichten bei der in-situ CT geclinchter Verbindungen.” Tagungsband zur Werkstoffprüfung 2022, edited by Martina Zimmermann, 2022.

Köhler, Daniel, et al. “Clinching in In Situ CT—A Novel Validation Method for Mechanical Joining Processes.”10.1007/978-3-031-06212-4_75__The Minerals, Metals &;amp; Materials Series, Springer International Publishing, 2022, doi:10.1007/978-3-031-06212-4_75.

Neuser, Moritz, et al. “Influence of Heat Treatment on the Suitability for Clinching of the Aluminium Casting Alloy AlSi9.”10.1177/14644207221075838__Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 146442072210758, SAGE Publications, 2022, doi:10.1177/14644207221075838.

Neuser, Moritz, et al. “Influence of Solidification Rates and Heat Treatment on the Mechanical Performance and Joinability of the Cast Aluminium Alloy AlSi10Mg.”10.1007/s11740-022-01106-1__Production Engineering, Springer Science and Business Media LLC, 2022, doi:10.1007/s11740-022-01106-1.

Kupfer, Robert, et al. “Clinching of Aluminum Materials – Methods for the Continuous Characterization of Process, Microstructure and Properties.”10.1016/j.jajp.2022.100108__Journal of Advanced Joining Processes, vol. 5, 100108, Elsevier BV, 2022, doi:10.1016/j.jajp.2022.100108.

Grydin, Olexandr, et al. “Numerical and Experimental Investigation of Heat Transfer in the Solidification-Deformation Zone During Twin-Roll Casting of Aluminum Strips.”10.1007/978-3-030-92529-1_96__Light Metals 2022, Springer International Publishing, 2022, doi:10.1007/978-3-030-92529-1_96.

Kupfer, Robert, et al. “Clinching of Aluminum Materials – Methods for the Continuous Characterization of Process, Microstructure and Properties.”10.1016/j.jajp.2022.100108__Journal of Advanced Joining Processes, vol. 5, 100108, Elsevier BV, 2022, doi:10.1016/j.jajp.2022.100108.

Friedlein, J., et al. “Inverse Parameter Identification of an Anisotropic Plasticity Model for Sheet Metal.”10.1088/1757-899X/1157/1/012004__IOP Conference Series: Materials Science and Engineering, vol. 1157, 2021, p. 012004, doi:10.1088/1757-899X/1157/1/012004.

Popp, J., et al. “Energy Direction in Ultrasonic Impregnation of Continuous Fiber-Reinforced Thermoplastics.”10.3390/jcs5090239__Journal of Composites Science, vol. 5, 2021, p. 239, doi:10.3390/jcs5090239.

Kalich, J., and U. Füssel. “Influence of the Production Process on the Binding Mechanism of Clinched Aluminum Steel Mixed Compounds.”10.3390/jmmp5040105__Journal of Manufacturing and Materials Processing, vol. 5, 2021, p. 105, doi:10.3390/jmmp5040105.

Pivovarov, D., et al. “Stochastic Local FEM for Computational Homogenization of Heterogeneous Materials Exhibiting Large Plastic Deformations.”10.1007/s00466-021-02099-x__Computational Mechanics, 2021, doi:10.1007/s00466-021-02099-x.

Friedlein, J., et al. “Anisotropic Plasticitydamage Material Model for Sheet Metal — Regularised Single Surface Formulation.”10.1002/pamm.202100068__PAMM, vol. 21, 2021, doi:10.1002/pamm.202100068.

Bielak, Christian Roman, et al. Further Development of a Numerical Method for Analyzing the Load Capacity of Clinched Joints in Versatile Process Chains. doi:10.25518/esaform21.4298.

Römisch, D., et al. “Data-Driven Analysis of Cold-Formed Pin Structure Characteristics in the Context of Versatile Joining Processes.”10.1088/1757-899X/1157/1/012077__IOP Conference Series: Materials Science and Engineering, vol. 1157, 2021, p. 012077, doi:10.1088/1757-899X/1157/1/012077.

Steinfelder, C., et al. “Numerical and Experimental Investigation of the Transmission Moment of Clinching Points.”10.1088/1757-899x/1157/1/012003__IOP Conference Series: Materials Science and Engineering, vol. 1157, 2021, p. 012003, doi:10.1088/1757-899x/1157/1/012003.

Popp, J., et al. “Fiber Orientation Mechanism of Continuous Fiber Reinforced Thermoplastics Hybrid Parts Joined with Metallic Pins.”10.1007/s10443-021-09892-0__Applied Composite Materials, vol. 28, 2021, pp. 951–972, doi:10.1007/s10443-021-09892-0.

Gröger, B., et al. “Clinching of Thermoplastic Composites and Metals—A Comparison of Three Novel Joining Technologies.”10.3390/ma14092286X__Materials, vol. 14, 2021, p. 2286, doi:10.3390/ma14092286X.

Busch, M., and T. Hausotte. “Determination of the Interface Structural Resolution of an Industrial X-Ray Computed Tomograph Using a Spherical Specimen and a Gap Specimen Consisting of Gauge Blocks.”10.4028/www.scientific.net/kem.883.41__Key Engineering Materials, vol. 883, 2021, pp. 41–48, doi:10.4028/www.scientific.net/kem.883.41.

Köhler, D., et al. “Clinching in In-Situ CT – Experimental Study on Suitable Tool Materials.”10.25518/esaform21.2781__ESAFORM 2021, 2021, doi:10.25518/esaform21.2781.

Köhler, D., et al. “In Situ Computed Tomography—Analysis of a Single-Lap Shear Test with Clinch Points.”10.3390/ma14081859__Materials, vol. 14, 2021, p. 1859, doi:10.3390/ma14081859.

Wituschek, S., and M. Lechner. “Friction Characterisation for a Tumbling Self-Piercing Riveting Process.”10.4028/www.scientific.net/kem.883.27__Key Engineering Materials, vol. 883, 2021, pp. 27–34, doi:10.4028/www.scientific.net/kem.883.27.

Wischer, Christian, et al. “Joining with Friction Spun Joint Connectors – Manufacturing and Analysis.”10.1088/1757-899x/1157/1/012007__IOP Conference Series: Materials Science and Engineering, vol. 1157, 2021, p. 012007, doi:10.1088/1757-899x/1157/1/012007.

Wischer, Christian, and Werner Homberg. “A Contribution on Versatile Process Chains: Joining with Adaptive Joining Elements, Formed by Friction Spinning.”10.1007/s11740-021-01094-8__Production Engineering, 2021, doi:10.1007/s11740-021-01094-8.

Weiß, D., et al. “Numerical and Experimental Fracture Mechanical Investigations of Clinchable Sheet Metals Made of HX.”10.4028/www.scientific.net/kem.883.127__Key Engineering Materials, vol. 883, 2021, pp. 127–32, doi:10.4028/www.scientific.net/kem.883.127.

Gröger, B., et al. “Computed Tomography Investigation of the Material Structure in Clinch Joints in Aluminium Fibre-Reinforced Thermoplastic Sheets.”10.1007/s11740-021-01091-x__Production Engineering, 2021, doi:10.1007/s11740-021-01091-x.

Weiß, D., et al. “Holistic Investigation Chain for the Experimental Determination of Fracture Mechanical Material Parameters with Special Specimens.”10.1007/s11740-021-01096-6__Production Engineering, 2021, doi:10.1007/s11740-021-01096-6.

Zirngibl, C., et al. “Approach for the Automated and Data-Based Design of Mechanical Joints.”10.1017/pds.2021.52__Proceedings of the Design Society, vol. 1, 2021, p. 521, doi:10.1017/pds.2021.52.

Zirngibl, C., et al. “Application of Reinforcement Learning for the Optimization of Clinch Joint Characteristics.”10.1007/s11740-021-01098-4__Production Engineering, 2021, doi:10.1007/s11740-021-01098-4.

Römisch, D., et al. “Joining of CFRT-Steel Hybrid Parts via Hole-Forming and Subsequent Pin Caulking.”10.1007/s11740-021-01093-9__Production Engineering, 2021, doi:10.1007/s11740-021-01093-9.

Lafarge, R., et al. “A New Non-Destructive Testing Method Applied to Clinching.”10.1007/978-3-030-75381-8_121__Minerals, Metals and Materials Series, 2021, p. 1461, doi:10.1007/978-3-030-75381-8_121.

Römisch, D., et al. “Experimental Study on Joining by Forming of Hct590x + z and En-Aw 6014 Sheets Using Cold Extruded Pin Structures.”10.3390/jmmp5010025__Journal of Manufacturing and Materials Processing, vol. 5, 2021, p. 25, doi:10.3390/jmmp5010025.

Römisch, D., et al. “Investigation of Different Joining by Forming Strategies When Connecting Different Metals without Auxiliary Elements.”10.4028/www.scientific.net/kem.883.19__Key Engineering Materials, vol. 883, 2021, pp. 19–26, doi:10.4028/www.scientific.net/kem.883.19.

Wituschek, S., and M. Lechner. “Material Characterisation Methods for a Tumbling Self-Piercing Riveting Process.”10.25518/esaform21.398__ESAFORM 2021, 2021, doi:10.25518/esaform21.398.

Köhler, D., et al. “A Method for Characterization of Geometric Deviations in Clinch Points with Computed Tomography and Transient Dynamic Analysis.”10.4028/www.scientific.net/kem.883.89__Key Engineering Materials, vol. 883, 2021, pp. 89–96, doi:10.4028/www.scientific.net/kem.883.89.

Ewenz, L., et al. “Effect of Different Tool Geometries on the Mechanical Properties of Al-Al Clinch Joints.”10.4028/www.scientific.net/kem.883.65__Key Engineering Materials, vol. 883, 2021, pp. 65–72, doi:10.4028/www.scientific.net/kem.883.65.

Gröger, B., et al. “Modelling of Thermally Supported Clinching of Fibre-Reinforced Thermoplastics: Approaches on Mesoscale Considering Large Deformations and Fibre Failure.”10.25518/esaform21.4293__ESAFORM 2021 - 24th International Conference on Material Forming, 2021, doi:10.25518/esaform21.4293.

Wiens, E., et al. “Development of a Novel Adaptive Joining Technology Employing Friction-Spun Joint Connectors (FSJC).”10.25518/esaform21.4682__ESAFORM, 2021, p. 4682, doi:10.25518/esaform21.4682.

Harzheim, S., et al. “A First Approach for the Treatment of Galvanic Corrosion and of Load-Bearing Capacity of Clinched Joints.”10.4028/www.scientific.net/kem.883.97__Key Engineering Materials, vol. 883, 2021, pp. 97–104, doi:10.4028/www.scientific.net/kem.883.97.

Friedlein, J., et al. “A Finite Plasticity Gradient-Damage Model for Sheet Metals during Forming and Clinching.”10.4028/www.scientific.net/KEM.883.57__Key Engineering Materials, vol. 883 KEM, 2021, p. 57, doi:10.4028/www.scientific.net/KEM.883.57.

Gröger, B., et al. “Temperature Dependent Modelling of Fibre-Reinforced Thermoplastic Organo-Sheet Material for Forming and Joining Process Simulations.”10.4028/www.scientific.net/KEM.883.49__Key Engineering Materials, vol. 883 KEM, 2021, p. 49, doi:10.4028/www.scientific.net/KEM.883.49.

Hofmann, M., et al. “A First Model of Fatigue Corrosion of a Metal through Hydrogen Embrittlement.”10.1002/pamm.202000122__PAMM, vol. 20, 2021, doi:10.1002/pamm.202000122.

Zirngibl, C., and B. Schleich. “Approach for the Automated Analysis of Geometrical Clinch Joint Characteristics.”10.4028/www.scientific.net/KEM.883.105__Key Engineering Materials, vol. 883 KEM, 2021, p. 105, doi:10.4028/www.scientific.net/KEM.883.105.

Pivovarov, Dmytro, et al. “Parametric FEM for Computational Homogenization of Heterogeneous Materials with Random Voids.”10.1002/pamm.202000071__PAMM, vol. 20, no. 1, Wiley, 2021, doi:10.1002/pamm.202000071.

Böhnke, Max, et al. “Concept Development of a Method for Identifying Friction Coefficients for the Numerical Simulation of Clinching Processes.”10.1007/s00170-021-07986-4__The International Journal of Advanced Manufacturing Technology, 2021, doi:10.1007/s00170-021-07986-4.

Popp, Julian, et al. “Influence of Pin Geometry on the Joint Strength of CFRT-Metal Hybrid Parts with Metallic Pins.” Joining Plastics, vol. 15, no. 3–4, 2021.

Kullmer, Gunter, et al. Entwicklung einer Methode zur differenzierten Messung des Wachstums der Rissenden von Innenrissen mit der Elektropotentialmethode. 2021, pp. 107–16, doi:10.48447/BR-2021-013.

Weiß, Deborah, et al. Experimentelle bruchmechanische Untersuchung eines clinchgeeigneten Bleches aus HX mithilfe einer neuen Probengeometrie. 2021, pp. 231–40, doi:10.48447/BR-2021-025.

Rossel, Moritz Sebastian, et al. “Development of a Method for the Identification of Friction Coefficients in Sheet Metal Materials for the Numerical Simulation of Clinching Processes.”10.4028/www.scientific.net/kem.883.81__Key Engineering Materials, vol. 883, Trans Tech Publications, Ltd., 2021, pp. 81–88, doi:10.4028/www.scientific.net/kem.883.81.

Kappe, Fabian, et al. “Influence of rivet length on joint formation on self-piercing riveting process considering further process parameters.”10.25518/esaform21.4277__ESAFORM 2021, University of Liege, 2021, doi:10.25518/esaform21.4277.

Böhnke, Max, et al. “Influence of Various Procedures for the Determination of Flow Curves on the Predictive Accuracy of Numerical Simulations for Mechanical Joining Processes.”10.1515/mt-2020-0082__Materials Testing, vol. 63, no. 6, De Gruyter, 2021, pp. 493–500, doi:10.1515/mt-2020-0082.

Kappe, Fabian, et al. “New Approach for Versatile Self Piercing Riveting: Joining System and Auxiliary Part.”10.4028/www.scientific.net/kem.883.3__Key Engineering Materials, vol. 883, Trans Tech Publications, Ltd., 2021, pp. 3–10, doi:10.4028/www.scientific.net/kem.883.3.

Wituschek, Simon, et al. “Investigation of the Influence of Varying Tumbling Strategies on a Tumbling Self-Piercing Riveting Process.”10.1007/s11740-021-01099-3__Production Engineering, 2021, doi:10.1007/s11740-021-01099-3.

Steinfelder, Christian, et al. “Load Path Transmission in Joining Elements.”10.4028/www.scientific.net/kem.883.73__Key Engineering Materials, 2021, pp. 73–80, doi:10.4028/www.scientific.net/kem.883.73.

Martin, Sven, and Thomas Tröster. “Joint point loadings in car bodies – the influence of manufacturing tolerances and scatter in material properties.”10.25518/esaform21.3801__ESAFORM 2021, 2021, doi:10.25518/esaform21.3801.

Wischer, Christian, et al. “Joining with Versatile Joining Elements Formed by Friction Spinning.”10.1016/j.jajp.2021.100060__Journal of Advanced Joining Processes, vol. 3, 100060, Elsevier, 2021, doi:10.1016/j.jajp.2021.100060.

Köhler, Daniel, et al. “A Method for Characterization of Geometric Deviations in Clinch Points with Computed Tomography and Transient Dynamic Analysis.”10.4028/www.scientific.net/kem.883.89__Key Engineering Materials, vol. 883, Trans Tech Publications, Ltd., 2021, pp. 89–96, doi:10.4028/www.scientific.net/kem.883.89.

Gröger, Benjamin, et al. “Computed Tomography Investigation of the Material Structure in Clinch Joints in Aluminium Fibre-Reinforced Thermoplastic Sheets.”10.1007/s11740-021-01091-x__Production Engineering, vol. 16, no. 2–3, Springer Science and Business Media LLC, 2021, pp. 203–12, doi:10.1007/s11740-021-01091-x.

Köhler, Daniel, et al. “In Situ Computed Tomography—Analysis of a Single-Lap Shear Test with Clinch Points.”10.3390/ma14081859__Materials, vol. 14, no. 8, 1859, MDPI AG, 2021, doi:10.3390/ma14081859.

Köhler, Daniel, et al. “Clinching in In-situ CT – Experimental Study on Suitable Tool Materials.”10.25518/esaform21.2781__ESAFORM 2021, University of Liege, 2021, doi:10.25518/esaform21.2781.

Köhler, D., et al. “Characterisation of Lateral Offsets in Clinch Points with Computed Tomography and Transient Dynamic Analysis.”10.1016/j.jajp.2021.100089__Journal of Advanced Joining Processes, vol. 5, 100089, Elsevier BV, 2021, doi:10.1016/j.jajp.2021.100089.

Martin, Sven, et al. “Identification of Joints for a Load-Adapted Shape in a Body in White Using Steady State Vehicle Simulations.”10.1016/j.finmec.2021.100065__Forces in Mechanics, vol. 6, 100065, Elsevier BV, 2021, doi:10.1016/j.finmec.2021.100065.

Neuser, Moritz, et al. “Effect of Solidification Rates at Sand Casting on the Mechanical Joinability of a Cast Aluminium Alloy.”10.3390/met11081304__Metals, 1304, 2021, doi:10.3390/met11081304.

Neuser, Moritz, et al. “Joining Suitability of Cast Aluminium for Self-Piercing Riveting.”10.1088/1757-899x/1157/1/012005__IOP Conference Series: Materials Science and Engineering, 012005, 2021, doi:10.1088/1757-899x/1157/1/012005.

Bielak, Christian Roman, et al. “Numerical Analysis of the Robustness of Clinching Process Considering the Pre-Forming of the Parts .”https://doi.org/10.1016/j.jajp.2020.100038__Journal of Advanced Joining Processes. , Elsevier, 2020, doi:https://doi.org/10.1016/j.jajp.2020.100038.

Steinfelder, C., and A. Brosius. “A New Approach for the Evaluation of Component and Joint Loads Based on Load Path Analysis.”10.1007/978-3-662-62138-7_14__Lecture Notes in Production Engineering, 2020, pp. 134–41, doi:10.1007/978-3-662-62138-7_14.

Böhm, H., et al. “Characterization and Numerical Modelling of Through-Thickness Metallic-Pin-Reinforced Fibre/Thermoplastic Composites under Bending Loading.”10.3390/jcs4040188__Journal of Composites Science, vol. 4, 2020, p. 188, doi:10.3390/jcs4040188.

Sadeghian, B., et al. “Investigation of Clinched Joints – A Finite Element Simulation of a Non-Destructive Approach.”10.1007/978-3-662-62138-7_12__Lecture Notes in Production Engineering, 2020, pp. 116–24, doi:10.1007/978-3-662-62138-7_12.

Ewenz, L., et al. “Untersuchungen Zum Einfluss von Geometrieparametern Bei Artgleichen Al-Clinchverbindungen Auf Das Ermüdungsverhalten Im Bereich Hoher Bis Sehr Hoher Lastspielzahlen.”10.48447/WP-2020-039__Tagung Werkstoffprüfung 2020. Werkstoffe Und Bauteile Auf Dem Prüfstand. Prüftechnik - Kennwertermit, 2020, doi:10.48447/WP-2020-039.

Grydin, Olexandr, et al. “Influence of Nozzle Shape on Near-Surface Segregation Formation During Twin-Roll Casting of Aluminum Strips.”10.1007/978-3-030-36408-3_141__Light Metals 2020, 2020, pp. 1039–44, doi:10.1007/978-3-030-36408-3_141.

Köhler, D., et al. “Experimental and Numerical Studies on the Deformation of a Flexible Wire in an Injection Moulding Process.”10.1016/j.promfg.2020.04.288__Procedia Manufacturing, vol. 47, 2020, pp. 940–47, doi:10.1016/j.promfg.2020.04.288.

Zirngibl, C., et al. “Potentiale Datengestützter Methoden Zur Gestaltung Und Optimierung Mechanischer Fügeverbindungen.”10.35199/dfx2020.8__Proceedings of the 31st Symposium Design for X (D), 2020, doi:10.35199/dfx2020.8.

Köhler, D., et al. “Clinching in In-Situ CT—A Numerical Study on Suitable Tool Materials.”10.1016/j.jajp.2020.100034__Journal of Advanced Joining Processes, vol. 2, 2020, p. 100034, doi:10.1016/j.jajp.2020.100034.

Kraus, M., and M. Merklein. “Potential of Joining Dissimilar Materials by Cold Formed Pin-Structures.”10.1016/j.jmatprotec.2020.116697__Journal of Materials Processing Technology, vol. 283, 2020, p. 116697, doi:10.1016/j.jmatprotec.2020.116697.

Bielak, Christian Roman, et al. Development of a numerical method for analyzing the robustness of clinching in versatile process chains.

Wituschek, S., et al. “Test Method for Friction Characterization of Rivets.”10.4028/www.scientific.net/ddf.404.132__Defect and Diffusion Forum, vol. 404, 2020, pp. 132–37, doi:10.4028/www.scientific.net/ddf.404.132.

Weiß, Deborah, et al. Development of a Special Specimen Geometry for the Experimental Determination of Fracture Mechanical Parameters of Clinchable Metal Sheets. Elsevier, 2020, pp. 2335–41, doi:10.1016/j.prostr.2020.11.081.

Weiß, Deborah, et al. Experimental and Numerical Preliminary Investigations of the Base Material and Preformed Components Regarding Fatigue Crack Growth in Joined Structures. 2020.

Kappe, Fabian, et al. Investigation of Influencing Parameters on the Joint Formation of the Self-Piercing Riveting Process. 2020.

Martin, Sven, et al. “Probability Distribution of Joint Point Loadings in Car Body Structures under Global Bending and Torsion.”10.1016/j.promfg.2020.04.324__Procedia Manufacturing, Elsevier, 2020, pp. 419–24, doi:10.1016/j.promfg.2020.04.324.

Rostek, Tim, et al. “Joining with Versatile Friction-Spun Joint Connectors.”10.1016/j.promfg.2020.04.313__Procedia Manufacturing, vol. 47,10.1016/j.promfg.2020.04.313__Elsevier Ltd, 2020, pp. 395–99, doi:10.1016/j.promfg.2020.04.313.

Köhler, Daniel, et al. “Clinching in In-Situ CT—A Numerical Study on Suitable Tool Materials.”10.1016/j.jajp.2020.100034__Journal of Advanced Joining Processes, vol. 2, 100034, Elsevier BV, 2020, doi:10.1016/j.jajp.2020.100034.

Kraus, M., et al. “Mechanical Joining without Auxiliary Element by Cold Formed Pins for Multi-Material-Systems.”10.1063/1.5112570__AIP Conference Proceedings, vol. 2113, 2019, p. 050006, doi:10.1063/1.5112570.