An alternative and robust formulation of the fatigue crack growth rate curve for long cracks
G. Kullmer, D. Weiß, B. Schramm, Engineering Fracture Mechanics 296 (2024).

Weiterentwicklung des Exponentialansatzes zur Beschreibung von Rissfortschrittskurven
G. Kullmer, D. Weiß, B. Schramm, in: Deutscher Verband für Materialforschung und –prüfung e.V., 2024.

Simulation-based investigation of the metrological interface structural resolution capability of X-ray computed tomography scanners
M. Busch, T. Hausotte, Journal of Sensors and Sensor Systems 12 (2023) 1–8.

Anrisserkennung an geclinchten Proben während einer zyklischen Belastung unter Nutzung eines Scanning Laser Doppler Vibrometers
A. Brosius, L. Ewenz, R. Stephan, M. Zimmermann, in: M. Zimmermann (Ed.), Tagung Werkstoffprüfung 2022, Deutsche Gesellschaft für Materialkunde e.V. (DGM), 2023.

Ableitung flacher Probengeometrien zur Abbildung mehraxialer Spannungszustände in Clinchverbindungen unter zyklischer Beanspruchung
L. Ewenz, M. Kuczyk, S. Schöne, M. Zimmermann, in: M. Zimmermann (Ed.), Tagung Werkstoffprüfung 2022, Deutsche Gesellschaft für Materialkunde e.V. (DGM), 2023.

Untersuchungen zum Geometrie- und Frequenzeinfluss bei der Ermittlung zyklischer Kennwerte geclinchter Überlappverbindungen
L. Ewenz, R. Kühne, S. Schöne, M. Zimmermann, in: M. Zimmermann (Ed.), Tagung Werkstoffprüfung 2022, Deutsche Gesellschaft für Materialkunde e.V. (DGM), 2023.

Versatile self-piercing riveting with a tumbling superimposed punch
S. Wituschek, L. Elbel, M. Lechner, in: Materials Research Proceedings, Materials Research Forum LLC, 2023.

Comparison of ex- and in-situ investigations of clinched single-lap shear specimens
D. Köhler, R. Kupfer, J. Troschitz, M. Gude, in: Materials Research Proceedings, Materials Research Forum LLC, 2023.

In-situ Computed Tomography and Transient Dynamic Analysis of a Single-Lap Shear Test with a Composite-Metal Clinch Point
D. Köhler, R. Stephan, R. Kupfer, J. Troschitz, A. Brosius, M. Gude, in: Lecture Notes in Production Engineering, Springer International Publishing, Cham, 2023.

A calibration method for failure modeling in clinching process simulations
M. Böhnke, C.R. Bielak, J. Friedlein, M. Bobbert, J. Mergheim, P. Steinmann, G. Meschut, in: Materials Research Proceedings, Materials Research Forum LLC, 2023.

Influence of plastic orthotropy on clinching of sheet metal
J. Friedlein, C.R. Bielak, M. Böhnke, M. Bobbert, J. Mergheim, P. Steinmann, G. Meschut, in: Materials Research Proceedings, Materials Research Forum LLC, 2023.

Numerical Investigation of the Coupled Friction Behavior in the Clinching Process Chain
C.R. Bielak, M. Böhnke, M. Bobbert, G. Meschut, in: Lecture Notes in Mechanical Engineering, Springer Nature Switzerland, Cham, 2023.

Dynamic conformity assessment for joining force monitoring using Bayes filters
L. Butzhammer, F. Kappe, G. Meschut, T. Hausotte, in: Materials Research Proceedings, Materials Research Forum LLC, 2023.

Combination of versatile self-piercing riveting processes
S. Wituschek, F. Kappe, G. Meschut, M. Lechner, in: Materials Research Proceedings, Materials Research Forum LLC, 2023.

Bruchmechanische Untersuchung des Dualphasenstahls HX unter Temperatureinfluss
D. Weiß, T. Duffe, M. Buczek, G. Kullmer, B. Schramm, in: Deutscher Verband für Materialforschung und -prüfung e.V., 2023.

Mechanical Properties and Joinability of AlSi9 Alloy Manufactured by TwinRoll Casting
M. Neuser, F. Kappe, J. Ostermeier, J.T. Krüger, M. Bobbert, G. Meschut, M. Schaper, O. Grydin, Advanced Engineering Materials 24 (2022).

Influence of Kinematic Hardening on Clinch Joining of Dual-Phase Steel HX Sheet Metal
J. Friedlein, J. Mergheim, P. Steinmann, in: The Minerals, Metals &;amp; Materials Series, Springer International Publishing, Cham, 2022.

Numerical and experimental identification of fatigue crack initiation sites in clinched joints
L. Ewenz, C.R. Bielak, M. Otroshi, M. Bobbert, G. Meschut, M. Zimmermann, Production Engineering 16 (2022) 305–313.

Clinching in In Situ CT—A Novel Validation Method for Mechanical Joining Processes
D. Köhler, R. Kupfer, J. Troschitz, M. Gude, in: The Minerals, Metals &; Materials Series, Springer International Publishing, Cham, 2022.

Investigation of the influence of formed, non-rotationally symmetrical pin geometries and their effect on the joint quality of steel and aluminium sheets by direct pin pressing
D. Römisch, M. Kraus, M. Merklein, Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications 236 (2022) 1187–1202.

Joining of CFRT/Steel Hybrid Parts via Direct Pressing of Cold Formed Non-Rotational Symmetric Pin Structures
J. Popp, D. Römisch, M. Merklein, D. Drummer, Applied Sciences 12 (2022).

Joining Processes for Fibre-Reinforced Thermoplastics: Phenomena and Characterisation
J. Troschitz, B. Gröger, V. Würfel, R. Kupfer, M. Gude, Materials 15 (2022).

Über die Abgrenzung von Auflösungskonzepten in der industriellen Computertomografie
F. Binder, T. Hausotte, Tm - Technisches Messen 89 (2022) 20–24.

Herausforderungen bei computertomografischen Untersuchungen von Fügeverbindungen
M. Busch, L. Butzhammer, T. Hausotte, Tm - Technisches Messen 89 (2022) 83–88.

Knowledge and Data-Based Design and Dimensioning of Mechanical Joining Connections
C. Zirngibl, C. Sauer, B. Schleich, S. Wartzack, in: Volume 2: 42nd Computers and Information in Engineering Conference (CIE), American Society of Mechanical Engineers, 2022.

Estimation of Clinch Joint Characteristics Based on Limited Input Data Using Pre-Trained Metamodels
C. Zirngibl, B. Schleich, S. Wartzack, AI 3 (2022) 990–1006.

Characterisation of lateral offsets in clinch points with computed tomography and transient dynamic analysis
D. Köhler, B. Sadeghian, J. Troschitz, R. Kupfer, M. Gude, A. Brosius, Journal of Advanced Joining Processes 5 (2022) 100089.

Joining of continuous fiber reinforced thermoplastic/steel hybrid parts via undercutting pin structures and infrared heating
J. Popp, D. Drummer, Journal of Advanced Joining Processes 5 (2022) 100084.

Effect of the tool geometry on microstructure and geometrical features of clinched aluminum
L. Ewenz, M. Kuczyk, M. Zimmermann, Journal of Advanced Joining Processes 5 (2022).

Forming process induced material structure of fibre-reinforced thermoplastics - Experimental and numerical investigation of a bladder-assisted moulding process
B. Gröger, V. Würfel, A. Hornig, M. Gude, Journal of Advanced Joining Processes 5 (2022).

Investigation of the influence of the tumbling angle on a tumbling self-piercing riveting process
S. Wituschek, M. Lechner, Production Engineering (2022).

Analysis of the interactions between joint and component properties during clinching
C. Steinfelder, J. Acksteiner, C. Guilleaume, A. Brosius, Production Engineering (2022).

Application of an edge detection algorithm for surface determination in industrial X-ray computed tomography
M. Busch, T. Hausotte, Production Engineering (2022).

Design of clinched joints on the basis of binding mechanisms
J. Kalich, U. Füssel, Production Engineering (2022).

Observations on additive plasticity in the logarithmic strain space at excessive strains
J. Friedlein, J. Mergheim, P. Steinmann, International Journal of Solids and Structures 239–240 (2022) 111416.

Corrosion Phenomena and Fatigue Behavior of Clinched Joints: Numerical and Experimental Investigations
S. Harzheim, L. Ewenz, M. Zimmermann, T. Wallmersperger, Journal of Advanced Joining Processes 6 (2022).

The Influence of Heat Treatment on the Microstructure, Surface Roughness and Shear Tensile Strength of AISI 304 Clinch Joints
A.T. Zeuner, L. Ewenz, J. Kalich, S. Schöne, U. Füssel, M. Zimmermann, Metals 12 (2022).

Robustness Analysis of Pin Joining
D. Römisch, C. Zirngibl, B. Schleich, S. Wartzack, M. Merklein, Journal of Manufacturing and Materials Processing 6 (2022).

Characterisation of Fibre Bundle Deformation Behaviour—Test Rig, Results and Conclusions
A. Borowski, B. Gröger, R. Füßel, M. Gude, Journal of Manufacturing and Materials Processing 6 (2022).

Pin Extrusion for Mechanical Joining from Orbital Formed Tailored Blanks with Local Material Pre-Distribution
D. Römisch, A. Hetzel, S. Wituschek, M. Lechner, M. Merklein, Journal of Manufacturing and Materials Processing 6 (2022).

Warmforming Flow Pressing Characteristics of Continuous Fibre Reinforced Thermoplastic Composites
B. Gröger, D. Römisch, M. Kraus, J. Troschitz, R. Füßel, M. Merklein, M. Gude, Polymers 14 (2022).

A Data Driven Modelling Approach for the Strain Rate Dependent 3D Shear Deformation and Failure of Thermoplastic Fibre Reinforced Composites: Experimental Characterisation and Deriving Modelling Parameters
J. Gerritzen, A. Hornig, B. Gröger, M. Gude, Journal of Composites Science 6 (2022).

Atomic Force Microscope with an Adjustable Probe Direction and Integrated Sensing and Actuation
J. Schaude, T. Hausotte, Nanomanufacturing and Metrology 5 (2022) 139–148.

A Damage Model for Corrosion Fatigue Due to Hydrogen Embrittlement
Y. Shi, S. Harzheim, M. Hofmann, T. Wallmersperger, in: Material Modeling and Structural Mechanics, Springer International Publishing, Cham, 2022.

Long-Term Behavior of Clinched Electrical Contacts
J. Kalich, M. Matzke, W. Pfeiffer, S. Schlegel, L. Kornhuber, U. Füssel, Metals 12 (2022).

Modelling and Simulation Strategies for Fluid–Structure-Interactions of Highly Viscous Thermoplastic Melt and Single Fibres—A Numerical Study
B. Gröger, J. Wang, T. Bätzel, A. Hornig, M. Gude, Materials 15 (2022).

Comparison of two mesh-moving techniques for finite element simulations of galvanic corrosion
S. Harzheim, M. Hofmann, T. Wallmersperger, Acta Mechanica 233 (2022) 4427–4439.

Electrical Contacting of Aluminum Bus Bars Using Clinching and Functional Elements
U. Füssel, S. Schlegel, G. Reschke, J. Kalich, in: SFU/ICAFT 2022, MDPI, 2022.

Investigations on Combined in situ CT and Acoustic Analysis during Clinching
D. Köhler, R. Stephan, R. Kupfer, J. Troschitz, A. Brosius, M. Gude, in: Key Engineering Materials, Trans Tech Publications, Ltd., 2022, pp. 1489–1497.

Robust estimation of clinch joint characteristics based on data-driven methods
C. Zirngibl, B. Schleich, S. Wartzack, The International Journal of Advanced Manufacturing Technology (2022).

Numerical fatigue life prediction of corroded and non-corroded clinched joints
S. Harzheim, M. Hofmann, T. Wallmersperger, Mechanics of Advanced Materials and Structures (2022) 1–6.

Experimental Measurement Method and Evaluation of an Analytical Approach for Sound Conduction through Multiple Clinched Sheets
R. Stephan, A. Brosius, in: The 28th Saxon Conference on Forming Technology SFU and the 7th International Conference on Accuracy in Forming Technology ICAFT, MDPI, 2022.

Experimental and Numerical Analysis of Cold Formed Multi Pin Structures Using a Multi-Acting Tool Design
D. Römisch, M. Merklein, in: 2022.

Versatile tool design for a tumbling self-piercing riveting process
S. Wituschek, M. Lechner, in: 2022.

Approach to Determine the Characteristic Dimensions of Clinched Joints by Industrial X-ray Computed Tomography
M. Busch, D. Köhler, T. Hausotte, R. Kupfer, J. Troschitz, M. Gude, in: 2022.

Calibration of 3D scan trajectories for an industrial computed tomography setup with 6-DOF object manipulator system using a single sphere
L. Butzhammer, A.M. Müller, T. Hausotte, Measurement Science and Technology 34 (2022).

Functionality Study of an Optical Measurement Concept for Local Force Signal Determination in High Strain Rate Tensile Tests
M. Böhnke, E. Unruh, S. Sell, M. Bobbert, D. Hein, G. Meschut, Key Engineering Materials 926 (2022) 1564–1572.

Development of a Modified Punch Test for Investigating the Failure Behavior in Sheet Metal Materials
M. Böhnke, C.R. Bielak, M. Bobbert, G. Meschut, in: The Minerals, Metals &;amp; Materials Series, Springer International Publishing, Cham, 2022.

Experimental and numerical investigation of the influence of multiaxial loading conditions on the failure behavior of clinched joints
M. Böhnke, C.R. Bielak, M. Bobbert, G. Meschut, Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications (2022).

Fracture mechanical investigation of preformed metal sheets using a novel CC-specimen
D. Weiß, B. Schramm, in: Procedia Structural Integrity, Elsevier BV, 2022, pp. 879–885.

Review on mechanical joining by plastic deformation
G. Meschut, M. Merklein, A. Brosius, D. Drummer, L. Fratini, U. Füssel, M. Gude, W. Homberg, P.A.F. Martins, M. Bobbert, M. Lechner, R. Kupfer, B. Gröger, D. Han, J. Kalich, F. Kappe, T. Kleffel, D. Köhler, C.-M. Kuball, J. Popp, D. Römisch, J. Troschitz, C. Wischer, S. Wituschek, M. Wolf, Journal of Advanced Joining Processes 5 (2022).

Geometric and mechanical joint characterization of conventionally  and tumbled self-piercing riveting joints
S. Wituschek, F. Kappe, G. Meschut, M. Lechner, Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications (2022).

Mechanical Properties and Joinability of AlSi9 Alloy Manufactured by TwinRoll Casting
M. Neuser, F. Kappe, J. Ostermeier, J.T. Krüger, M. Bobbert, G. Meschut, M. Schaper, O. Grydin, Advanced Engineering Materials 24 (2022).

Identification of Requirements for FE Modeling of an Adaptive Joining Technology Employing Friction-Spun Joint Connectors (FSJC)
A. Oesterwinter, C. Wischer, W. Homberg, Metals 12 (2022).

Further Development of 3D Crack Growth Simulation Program to Include Contact Loading Situations
T.D. Joy, D. Weiß, B. Schramm, G. Kullmer, Applied Sciences 12 (2022).

Influence of plane mixed-mode loading on the kinking angle of clinchable metal sheets
D. Weiß, B. Schramm, G. Kullmer, in: Procedia Structural Integrity, Elsevier BV, 2022, pp. 139–147.

A Review on the Modeling of the Clinching Process Chain - Part III: Operational Phase
B. Schramm, S. Harzheim, D. Weiß, T.D. Joy, M. Hofmann, J. Mergheim, T. Wallmersperger, Journal of Advanced Joining Processes (2022).

Development of a method for the separate measurement of the growth of internal crack tips by means of the potential drop method
G. Kullmer, D. Weiß, B. Schramm, Engineering Fracture Mechanics (2022).

Joining of multi-material structures using a versatile self-piercing riveting process
F. Kappe, S. Wituschek, M. Bobbert, M. Lechner, G. Meschut, Production Engineering (2022).

Provision of cross-domain knowledge in mechanical joining using ontologies
C. Zirngibl, P. Kügler, J. Popp, C.R. Bielak, M. Bobbert, D. Drummer, G. Meschut, S. Wartzack, B. Schleich, Production Engineering (2022).

Numerical Investigation of the Influence of a Movable Die Base on Joint Formation in Semi-tubular Self-piercing Riveting
F. Kappe, S. Wituschek, V. de Pascalis, M. Bobbert, M. Lechner, G. Meschut, in: Materials Design and Applications IV, Springer International Publishing, Cham, 2022.

Determining the influence of different process parameters on the versatile self-piercing riveting process using numerical methods
F. Kappe, C. Zirngibl, B. Schleich, M. Bobbert, S. Wartzack, G. Meschut, Journal of Manufacturing Processes 84 (2022) 1438–1448.

Increasing flexibility of self-piercing riveting by reducing tool–geometry combinations using cluster analysis in the application of multi-material design
F. Kappe, L. Schadow, M. Bobbert, G. Meschut, Proceedings of the Institution of Mechanical Engineers Part L Journal of Materials Design and Applications (2022).

Determining the properties of multirange semitubular selfpiercing riveted joints
F. Kappe, S. Wituschek, M. Bobbert, G. Meschut, Production Engineering (2022).

Fracture mechanical evaluation of the material HX
B. Schramm, D. Weiß, Materials Testing 64 (2022) 1437–1449.

Development of a Numerical 3D Model for Analyzing Clinched Joints in Versatile Process Chains
C.R. Bielak, M. Böhnke, M. Bobbert, G. Meschut, in: The Minerals, Metals &;amp; Materials Series, Springer International Publishing, Cham, 2022.

Numerical investigation of a friction  test to determine the friction  coefficients for the clinching process
C.R. Bielak, M. Böhnke, M. Bobbert, G. Meschut, Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications (2022).

A Review on the Modeling of the Clinching Process Chain - Part I: Design Phase
B. Schramm, S. Martin, C. Steinfelder, C.R. Bielak, A. Brosius, G. Meschut, T. Tröster, T. Wallmersperger, J. Mergheim, Journal of Advanced Joining Processes 6 (2022).

A Review on the Modeling of the Clinching Process Chain - Part II: Joining Process
B. Schramm, J. Friedlein, B. Gröger, C.R. Bielak, M. Bobbert, M. Gude, G. Meschut, T. Wallmersperger, J. Mergheim, Journal of Advanced Joining Processes (2022).

Numerical investigation of the clinched joint loadings considering the initial pre-strain in the joining area
S. Martin, C.R. Bielak, M. Bobbert, T. Tröster, G. Meschut, Production Engineering (2022).

Influence of the Surrounding Sheet Geometry on a Clinched Joint
S. Martin, K. Kurtusic, T. Tröster, Key Engineering Materials 927 (2022).

Investigations on Combined &lt;i&gt;In Situ&lt;/i&gt; CT and Acoustic Analysis during Clinching
D. Köhler, R. Stephan, R. Kupfer, J. Troschitz, A. Brosius, M. Gude, Key Engineering Materials 926 (2022) 1489–1497.

Approach to Determine the Characteristic Dimensions of Clinched Joints by Industrial X-ray Computed Tomography
M. Busch, D. Köhler, T. Hausotte, R. Kupfer, J. Troschitz, M. Gude, E-Journal of Nondestructive Testing 27 (2022).

Untersuchung zum Einfluss radioopaker Zwischenschichten bei der in-situ CT geclinchter Verbindungen
D. Köhler, R. Kupfer, J. Troschitz, M. Gude, in: M. Zimmermann (Ed.), Tagungsband zur Werkstoffprüfung 2022, Dresden, 2022.

Clinching in In Situ CT—A Novel Validation Method for Mechanical Joining Processes
D. Köhler, R. Kupfer, J. Troschitz, M. Gude, in: The Minerals, Metals &;amp; Materials Series, Springer International Publishing, Cham, 2022.

Influence of heat treatment on the suitability for clinching of the aluminium casting alloy AlSi9
M. Neuser, M. Böhnke, O. Grydin, M. Bobbert, M. Schaper, G. Meschut, Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications (2022).

Influence of solidification rates and heat treatment on the mechanical performance and joinability of the cast aluminium alloy AlSi10Mg
M. Neuser, O. Grydin, Y. Frolov, M. Schaper, Production Engineering (2022).

Clinching of Aluminum Materials – Methods for the Continuous Characterization of Process, Microstructure and Properties
R. Kupfer, D. Köhler, D. Römisch, S. Wituschek, L. Ewenz, J. Kalich, D. Weiß, B. Sadeghian, M. Busch, J. Krüger, M. Neuser, O. Grydin, M. Böhnke, C.R. Bielak, J. Troschitz, Journal of Advanced Joining Processes 5 (2022).

Numerical and Experimental Investigation of Heat Transfer in the Solidification-Deformation Zone During Twin-Roll Casting of Aluminum Strips
O. Grydin, D. Mortensen, M. Neuser, D. Lindholm, H.G. Fjaer, M. Schaper, in: Light Metals 2022, Springer International Publishing, Cham, 2022.

Clinching of Aluminum Materials – Methods for the Continuous Characterization of Process, Microstructure and Properties
R. Kupfer, D. Köhler, D. Römisch, S. Wituschek, L. Ewenz, J. Kalich, D. Weiß, B. Sadeghian, M. Busch, J.T. Krüger, M. Neuser, O. Grydin, M. Böhnke, C.R. Bielak, J. Troschitz, Journal of Advanced Joining Processes 5 (2022).

Inverse parameter identification of an anisotropic plasticity model for sheet metal
J. Friedlein, S. Wituschek, M. Lechner, J. Mergheim, P. Steinmann, IOP Conference Series: Materials Science and Engineering 1157 (2021) 012004.

Energy direction in ultrasonic impregnation of continuous fiber-reinforced thermoplastics
J. Popp, M. Wolf, T. Mattner, D. Drummer, Journal of Composites Science 5 (2021) 239.

Influence of the production process on the binding mechanism of clinched aluminum steel mixed compounds
J. Kalich, U. Füssel, Journal of Manufacturing and Materials Processing 5 (2021) 105.

Stochastic local FEM for computational homogenization of heterogeneous materials exhibiting large plastic deformations
D. Pivovarov, J. Mergheim, K. Willner, P. Steinmann, Computational Mechanics (2021).

Anisotropic plasticitydamage material model for sheet metal — Regularised single surface formulation
J. Friedlein, J. Mergheim, P. Steinmann, PAMM 21 (2021).

Further development of a numerical method for analyzing the load capacity of clinched joints in versatile process chains
C.R. Bielak, M. Böhnke, M. Bobbert, G. Meschut, in: ESAFORM 2021, n.d.

Data-driven analysis of cold-formed pin structure characteristics in the context of versatile joining processes
D. Römisch, C. Zirngibl, B. Schleich, S. Wartzack, M. Merklein, IOP Conference Series: Materials Science and Engineering 1157 (2021) 012077.

Numerical and experimental investigation of the transmission moment of clinching points
C. Steinfelder, J. Kalich, A. Brosius, U. Füssel, IOP Conference Series: Materials Science and Engineering 1157 (2021) 012003.

Fiber Orientation Mechanism of Continuous Fiber Reinforced Thermoplastics Hybrid Parts Joined with Metallic Pins
J. Popp, T. Kleffel, D. Römisch, T. Papke, M. Merklein, D. Drummer, Applied Composite Materials 28 (2021) 951–972.

Clinching of Thermoplastic Composites and Metals—A Comparison of Three Novel Joining Technologies
B. Gröger, J. Troschitz, J. Vorderbrüggen, C. Vogel, R. Kupfer, G. Meschut, M. Gude, Materials 14 (2021) 2286.