Mechanical joining without auxiliary element by cold formed pins for multi-material-systems
M. Kraus, P. Frey, T. Kleffel, D. Drummer, M. Merklein, AIP Conference Proceedings 2113 (2019) 050006.

Numerical analysis of the robustness of clinching process considering the pre-forming of the parts 
C.R. Bielak, M. Böhnke, R. Beck, M. Bobbert, G. Meschut, Journal of Advanced Joining Processes.  (2020).

A New Approach for the Evaluation of Component and Joint Loads Based on Load Path Analysis
C. Steinfelder, A. Brosius, Lecture Notes in Production Engineering (2020) 134–141.

Characterization and Numerical Modelling of Through-Thickness Metallic-Pin-Reinforced Fibre/Thermoplastic Composites under Bending Loading
H. Böhm, H. Zhang, B. Gröger, A. Hornig, M. Gude, Journal of Composites Science 4 (2020) 188.

Investigation of Clinched Joints – A Finite Element Simulation of a Non-destructive Approach
B. Sadeghian, C. Guilleaume, R. Lafarge, A. Brosius, Lecture Notes in Production Engineering (2020) 116–124.

Untersuchungen zum Einfluss von Geometrieparametern bei artgleichen Al-Clinchverbindungen auf das Ermüdungsverhalten im Bereich hoher bis sehr hoher Lastspielzahlen
L. Ewenz, S. Schettler, A.T. Zeuner, M. Zimmermann, Tagung Werkstoffprüfung 2020. Werkstoffe Und Bauteile Auf Dem Prüfstand. Prüftechnik - Kennwertermit (2020).

Influence of Nozzle Shape on Near-Surface Segregation Formation During Twin-Roll Casting of Aluminum Strips
O. Grydin, M. Stolbchenko, M. Schaper, in: Light Metals 2020, Cham, 2020, pp. 1039–1044.

Experimental and Numerical Studies on the Deformation of a Flexible Wire in an Injection Moulding Process
D. Köhler, B. Gröger, R. Kupfer, A. Hornig, M. Gude, Procedia Manufacturing 47 (2020) 940–947.

Potentiale datengestützter Methoden zur Gestaltung und Optimierung mechanischer Fügeverbindungen
C. Zirngibl, B. Schleich, S. Wartzack, Proceedings of the 31st Symposium Design for X (D) (2020).

Clinching in in-situ CT—A numerical study on suitable tool materials
D. Köhler, R. Kupfer, M. Gude, Journal of Advanced Joining Processes 2 (2020) 100034.

Potential of Joining Dissimilar Materials by Cold Formed Pin-Structures
M. Kraus, M. Merklein, Journal of Materials Processing Technology 283 (2020) 116697.

Development of a numerical method for analyzing the robustness of clinching in versatile process chains
C.R. Bielak, M. Böhnke, M. Bobbert, G. Meschut, in: Material Science and Engineering Congress - MSE 2020, n.d.

Test Method for Friction Characterization of Rivets
S. Wituschek, C.M. Kuball, M. Merklein, M. Lechner, Defect and Diffusion Forum 404 (2020) 132–137.

Development of a special specimen geometry for the experimental determination of fracture mechanical parameters of clinchable metal sheets
D. Weiß, B. Schramm, G. Kullmer, 28 (2020) 2335–2341.

Experimental and numerical preliminary investigations of the base material and preformed components regarding fatigue crack growth in joined structures
D. Weiß, B. Schramm, G. Kullmer, in: 2020.

Investigation of influencing parameters on the joint formation of the self-piercing riveting process
F. Kappe, S. Wituschek, M. Lechner, M. Bobbert, G. Meschut, M. Merklein, in: 2020.

Probability Distribution of Joint Point Loadings in Car Body Structures under Global Bending and Torsion
S. Martin, A.A. Camberg, T. Tröster, Procedia Manufacturing (2020) 419–424.

Joining with Versatile Friction-Spun Joint Connectors
T. Rostek, E. Wiens, W. Homberg, Procedia Manufacturing 47 (2020) 395–399.

Clinching in in-situ CT—A numerical study on suitable tool materials
D. Köhler, R. Kupfer, M. Gude, Journal of Advanced Joining Processes 2 (2020).

Inverse parameter identification of an anisotropic plasticity model for sheet metal
J. Friedlein, S. Wituschek, M. Lechner, J. Mergheim, P. Steinmann, IOP Conference Series: Materials Science and Engineering 1157 (2021) 012004.

Energy direction in ultrasonic impregnation of continuous fiber-reinforced thermoplastics
J. Popp, M. Wolf, T. Mattner, D. Drummer, Journal of Composites Science 5 (2021) 239.

Influence of the production process on the binding mechanism of clinched aluminum steel mixed compounds
J. Kalich, U. Füssel, Journal of Manufacturing and Materials Processing 5 (2021) 105.

Stochastic local FEM for computational homogenization of heterogeneous materials exhibiting large plastic deformations
D. Pivovarov, J. Mergheim, K. Willner, P. Steinmann, Computational Mechanics (2021).

Anisotropic plasticitydamage material model for sheet metal — Regularised single surface formulation
J. Friedlein, J. Mergheim, P. Steinmann, PAMM 21 (2021).

Further development of a numerical method for analyzing the load capacity of clinched joints in versatile process chains
C.R. Bielak, M. Böhnke, M. Bobbert, G. Meschut, in: ESAFORM 2021, n.d.

Data-driven analysis of cold-formed pin structure characteristics in the context of versatile joining processes
D. Römisch, C. Zirngibl, B. Schleich, S. Wartzack, M. Merklein, IOP Conference Series: Materials Science and Engineering 1157 (2021) 012077.

Numerical and experimental investigation of the transmission moment of clinching points
C. Steinfelder, J. Kalich, A. Brosius, U. Füssel, IOP Conference Series: Materials Science and Engineering 1157 (2021) 012003.

Fiber Orientation Mechanism of Continuous Fiber Reinforced Thermoplastics Hybrid Parts Joined with Metallic Pins
J. Popp, T. Kleffel, D. Römisch, T. Papke, M. Merklein, D. Drummer, Applied Composite Materials 28 (2021) 951–972.

Clinching of Thermoplastic Composites and Metals—A Comparison of Three Novel Joining Technologies
B. Gröger, J. Troschitz, J. Vorderbrüggen, C. Vogel, R. Kupfer, G. Meschut, M. Gude, Materials 14 (2021) 2286.

Determination of the Interface Structural Resolution of an Industrial X-Ray Computed Tomograph Using a Spherical Specimen and a Gap Specimen Consisting of Gauge Blocks
M. Busch, T. Hausotte, Key Engineering Materials 883 (2021) 41–48.

Clinching in In-situ CT – Experimental Study on Suitable Tool Materials
D. Köhler, R. Kupfer, J. Troschitz, M. Gude, ESAFORM 2021 (2021).

In Situ Computed Tomography—Analysis of a Single-Lap Shear Test with Clinch Points
D. Köhler, R. Kupfer, J. Troschitz, M. Gude, Materials 14 (2021) 1859.

Friction Characterisation for a Tumbling Self-Piercing Riveting Process
S. Wituschek, M. Lechner, Key Engineering Materials 883 (2021) 27–34.

Joining with Friction Spun Joint Connectors – Manufacturing and Analysis
C. Wischer, C. Steinfelder, W. Homberg, A. Brosius, IOP Conference Series: Materials Science and Engineering 1157 (2021) 012007.

A contribution on versatile process chains: joining with adaptive joining elements, formed by friction spinning
C. Wischer, W. Homberg, Production Engineering (2021).

Numerical and Experimental Fracture Mechanical Investigations of Clinchable Sheet Metals Made of HX
D. Weiß, B. Schramm, G. Kullmer, Key Engineering Materials 883 (2021) 127–132.

Computed tomography investigation of the material structure in clinch joints in aluminium fibre-reinforced thermoplastic sheets
B. Gröger, D. Köhler, J. Vorderbrüggen, J. Troschitz, R. Kupfer, G. Meschut, M. Gude, Production Engineering (2021).

Holistic investigation chain for the experimental determination of fracture mechanical material parameters with special specimens
D. Weiß, B. Schramm, G. Kullmer, Production Engineering (2021).

Approach for the automated and data-based design of mechanical joints
C. Zirngibl, B. Schleich, S. Wartzack, Proceedings of the Design Society 1 (2021) 521.

Application of reinforcement learning for the optimization of clinch joint characteristics
C. Zirngibl, F. Dworschak, B. Schleich, S. Wartzack, Production Engineering (2021).

Joining of CFRT-steel hybrid parts via hole-forming and subsequent pin caulking
D. Römisch, J. Popp, D. Drummer, M. Merklein, Production Engineering (2021).

A New Non-destructive Testing Method Applied to Clinching
R. Lafarge, A. Wolf, C. Guilleaume, A. Brosius, Minerals, Metals and Materials Series (2021) 1461.

Experimental study on joining by forming of hx + z and en-aw 6014 sheets using cold extruded pin structures
D. Römisch, M. Kraus, M. Merklein, Journal of Manufacturing and Materials Processing 5 (2021) 25.

Investigation of Different Joining by Forming Strategies when Connecting Different Metals without Auxiliary Elements
D. Römisch, M. Kraus, M. Merklein, Key Engineering Materials 883 (2021) 19–26.

Material characterisation methods for a tumbling self-piercing riveting process
S. Wituschek, M. Lechner, ESAFORM 2021 (2021).

A Method for Characterization of Geometric Deviations in Clinch Points with Computed Tomography and Transient Dynamic Analysis
D. Köhler, B. Sadeghian, R. Kupfer, J. Troschitz, M. Gude, A. Brosius, Key Engineering Materials 883 (2021) 89–96.

Effect of Different Tool Geometries on the Mechanical Properties of Al-Al Clinch Joints
L. Ewenz, J. Kalich, M. Zimmermann, U. Füssel, Key Engineering Materials 883 (2021) 65–72.

Modelling of thermally supported clinching of fibre-reinforced thermoplastics: Approaches on mesoscale considering large deformations and fibre failure
B. Gröger, A. Hornig, A. Hoog, M. Gude, ESAFORM 2021 - 24th International Conference on Material Forming (2021).

Development of a novel adaptive joining technology employing friction-spun joint connectors (FSJC)
E. Wiens, C. Wischer, W. Homberg, ESAFORM (2021) 4682.

A First Approach for the Treatment of Galvanic Corrosion and of Load-Bearing Capacity of Clinched Joints
S. Harzheim, C. Steinfelder, T. Wallmersperger, A. Brosius, Key Engineering Materials 883 (2021) 97–104.

A finite plasticity gradient-damage model for sheet metals during forming and clinching
J. Friedlein, J. Mergheim, P. Steinmann, Key Engineering Materials 883 KEM (2021) 57.

Temperature dependent modelling of fibre-reinforced thermoplastic organo-sheet material for forming and joining process simulations
B. Gröger, A. Hornig, A. Hoog, M. Gude, Key Engineering Materials 883 KEM (2021) 49.

A first Model of Fatigue Corrosion of a Metal through Hydrogen Embrittlement
M. Hofmann, Y. Shi, T. Wallmersperger, PAMM 20 (2021).

Approach for the automated analysis of geometrical clinch joint characteristics
C. Zirngibl, B. Schleich, Key Engineering Materials 883 KEM (2021) 105.

Parametric FEM for computational homogenization of heterogeneous materials with random voids
D. Pivovarov, J. Mergheim, K. Willner, P. Steinmann, in: PAMM, Wiley, 2021.

Concept development of a method for identifying friction coefficients for the numerical simulation of clinching processes
M. Böhnke, M.S. Rossel, C.R. Bielak, M. Bobbert, G. Meschut, The International Journal of Advanced Manufacturing Technology (2021).

Influence of pin geometry on the joint strength of CFRT-metal hybrid parts with metallic pins
J. Popp, T. Kleffel, D. Drummer, Joining Plastics 15 (2021).

Entwicklung einer Methode zur differenzierten Messung des Wachstums der Rissenden von Innenrissen mit der Elektropotentialmethode
G. Kullmer, D. Weiß, B. Schramm, in: 2021, pp. 107–116.

Experimentelle bruchmechanische Untersuchung eines clinchgeeigneten Bleches aus HX mithilfe einer neuen Probengeometrie
D. Weiß, B. Schramm, M. Neuser, O. Grydin, G. Kullmer, in: 2021, pp. 231–240.

Development of a Method for the Identification of Friction Coefficients in Sheet Metal Materials for the Numerical Simulation of Clinching Processes
M.S. Rossel, M. Böhnke, C.R. Bielak, M. Bobbert, G. Meschut, Key Engineering Materials 883 (2021) 81–88.

Influence of rivet length on joint formation on self-piercing riveting process considering further process parameters
F. Kappe, C.R. Bielak, V. Sartisson, M. Bobbert, G. Meschut, in: ESAFORM 2021, University of Liege, 2021.

Influence of various procedures for the determination of flow curves on the predictive accuracy of numerical simulations for mechanical joining processes
M. Böhnke, F. Kappe, M. Bobbert, G. Meschut, Materials Testing 63 (2021) 493–500.

New Approach for Versatile Self Piercing Riveting: Joining System and Auxiliary Part
F. Kappe, M. Bobbert, G. Meschut, Key Engineering Materials 883 (2021) 3–10.

Investigation of the influence of varying tumbling strategies on a tumbling self-piercing riveting process
S. Wituschek, F. Kappe, M. Lechner, Production Engineering (2021).

Load Path Transmission in Joining Elements
C. Steinfelder, S. Martin, A. Brosius, T. Tröster, Key Engineering Materials (2021) 73–80.

Joint point loadings in car bodies – the influence of manufacturing tolerances and scatter in material properties
S. Martin, T. Tröster, ESAFORM 2021 (2021).

Joining with versatile joining elements formed by friction spinning
C. Wischer, E. Wiens, W. Homberg, Journal of Advanced Joining Processes 3 (2021).

A Method for Characterization of Geometric Deviations in Clinch Points with Computed Tomography and Transient Dynamic Analysis
D. Köhler, B. Sadeghian, R. Kupfer, J. Troschitz, M. Gude, A. Brosius, Key Engineering Materials 883 (2021) 89–96.

Computed tomography investigation of the material structure in clinch joints in aluminium fibre-reinforced thermoplastic sheets
B. Gröger, D. Köhler, J. Vorderbrüggen, J. Troschitz, R. Kupfer, G. Meschut, M. Gude, Production Engineering 16 (2021) 203–212.

In Situ Computed Tomography—Analysis of a Single-Lap Shear Test with Clinch Points
D. Köhler, R. Kupfer, J. Troschitz, M. Gude, Materials 14 (2021).

Clinching in In-situ CT – Experimental Study on Suitable Tool Materials
D. Köhler, R. Kupfer, J. Troschitz, M. Gude, ESAFORM 2021 (2021).

Characterisation of lateral offsets in clinch points with computed tomography and transient dynamic analysis
D. Köhler, B. Sadeghian, J. Troschitz, R. Kupfer, M. Gude, A. Brosius, Journal of Advanced Joining Processes 5 (2021).

Identification of joints for a load-adapted shape in a body in white using steady state vehicle simulations
S. Martin, J. Schütte, C. Bäumler, W. Sextro, T. Tröster, Forces in Mechanics 6 (2021).

Effect of Solidification Rates at Sand Casting on the Mechanical Joinability of a Cast Aluminium Alloy
M. Neuser, O. Grydin, A. Andreiev, M. Schaper, Metals (2021).

Joining suitability of cast aluminium for self-piercing riveting
M. Neuser, F. Kappe, M. Busch, O. Grydin, M. Bobbert, M. Schaper, G. Meschut, T. Hausotte, IOP Conference Series: Materials Science and Engineering (2021).

Mechanical Properties and Joinability of AlSi9 Alloy Manufactured by TwinRoll Casting
M. Neuser, F. Kappe, J. Ostermeier, J.T. Krüger, M. Bobbert, G. Meschut, M. Schaper, O. Grydin, Advanced Engineering Materials 24 (2022).

Influence of Kinematic Hardening on Clinch Joining of Dual-Phase Steel HX Sheet Metal
J. Friedlein, J. Mergheim, P. Steinmann, in: The Minerals, Metals &;amp; Materials Series, Springer International Publishing, Cham, 2022.

Numerical and experimental identification of fatigue crack initiation sites in clinched joints
L. Ewenz, C.R. Bielak, M. Otroshi, M. Bobbert, G. Meschut, M. Zimmermann, Production Engineering 16 (2022) 305–313.

Clinching in In Situ CT—A Novel Validation Method for Mechanical Joining Processes
D. Köhler, R. Kupfer, J. Troschitz, M. Gude, in: The Minerals, Metals &; Materials Series, Springer International Publishing, Cham, 2022.

Investigation of the influence of formed, non-rotationally symmetrical pin geometries and their effect on the joint quality of steel and aluminium sheets by direct pin pressing
D. Römisch, M. Kraus, M. Merklein, Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications 236 (2022) 1187–1202.

Joining of CFRT/Steel Hybrid Parts via Direct Pressing of Cold Formed Non-Rotational Symmetric Pin Structures
J. Popp, D. Römisch, M. Merklein, D. Drummer, Applied Sciences 12 (2022).

Joining Processes for Fibre-Reinforced Thermoplastics: Phenomena and Characterisation
J. Troschitz, B. Gröger, V. Würfel, R. Kupfer, M. Gude, Materials 15 (2022).

Über die Abgrenzung von Auflösungskonzepten in der industriellen Computertomografie
F. Binder, T. Hausotte, Tm - Technisches Messen 89 (2022) 20–24.

Herausforderungen bei computertomografischen Untersuchungen von Fügeverbindungen
M. Busch, L. Butzhammer, T. Hausotte, Tm - Technisches Messen 89 (2022) 83–88.

Knowledge and Data-Based Design and Dimensioning of Mechanical Joining Connections
C. Zirngibl, C. Sauer, B. Schleich, S. Wartzack, in: Volume 2: 42nd Computers and Information in Engineering Conference (CIE), American Society of Mechanical Engineers, 2022.

Estimation of Clinch Joint Characteristics Based on Limited Input Data Using Pre-Trained Metamodels
C. Zirngibl, B. Schleich, S. Wartzack, AI 3 (2022) 990–1006.

Characterisation of lateral offsets in clinch points with computed tomography and transient dynamic analysis
D. Köhler, B. Sadeghian, J. Troschitz, R. Kupfer, M. Gude, A. Brosius, Journal of Advanced Joining Processes 5 (2022) 100089.

Joining of continuous fiber reinforced thermoplastic/steel hybrid parts via undercutting pin structures and infrared heating
J. Popp, D. Drummer, Journal of Advanced Joining Processes 5 (2022) 100084.

Effect of the tool geometry on microstructure and geometrical features of clinched aluminum
L. Ewenz, M. Kuczyk, M. Zimmermann, Journal of Advanced Joining Processes 5 (2022).

Forming process induced material structure of fibre-reinforced thermoplastics - Experimental and numerical investigation of a bladder-assisted moulding process
B. Gröger, V. Würfel, A. Hornig, M. Gude, Journal of Advanced Joining Processes 5 (2022).

Investigation of the influence of the tumbling angle on a tumbling self-piercing riveting process
S. Wituschek, M. Lechner, Production Engineering (2022).

Analysis of the interactions between joint and component properties during clinching
C. Steinfelder, J. Acksteiner, C. Guilleaume, A. Brosius, Production Engineering (2022).

Application of an edge detection algorithm for surface determination in industrial X-ray computed tomography
M. Busch, T. Hausotte, Production Engineering (2022).

Design of clinched joints on the basis of binding mechanisms
J. Kalich, U. Füssel, Production Engineering (2022).

Observations on additive plasticity in the logarithmic strain space at excessive strains
J. Friedlein, J. Mergheim, P. Steinmann, International Journal of Solids and Structures 239–240 (2022) 111416.

Corrosion Phenomena and Fatigue Behavior of Clinched Joints: Numerical and Experimental Investigations
S. Harzheim, L. Ewenz, M. Zimmermann, T. Wallmersperger, Journal of Advanced Joining Processes 6 (2022).

The Influence of Heat Treatment on the Microstructure, Surface Roughness and Shear Tensile Strength of AISI 304 Clinch Joints
A.T. Zeuner, L. Ewenz, J. Kalich, S. Schöne, U. Füssel, M. Zimmermann, Metals 12 (2022).

Robustness Analysis of Pin Joining
D. Römisch, C. Zirngibl, B. Schleich, S. Wartzack, M. Merklein, Journal of Manufacturing and Materials Processing 6 (2022).

Characterisation of Fibre Bundle Deformation Behaviour—Test Rig, Results and Conclusions
A. Borowski, B. Gröger, R. Füßel, M. Gude, Journal of Manufacturing and Materials Processing 6 (2022).

Pin Extrusion for Mechanical Joining from Orbital Formed Tailored Blanks with Local Material Pre-Distribution
D. Römisch, A. Hetzel, S. Wituschek, M. Lechner, M. Merklein, Journal of Manufacturing and Materials Processing 6 (2022).