M. Kraus, P. Frey, T. Kleffel, D. Drummer, and M. Merklein, “Mechanical joining without auxiliary element by cold formed pins for multi-material-systems,”10.1063/1.5112570__AIP Conference Proceedings, vol. 2113, p. 050006, 2019, doi:10.1063/1.5112570 .

C. R. Bielak, M. Böhnke, R. Beck, M. Bobbert, and G. Meschut, “Numerical analysis of the robustness of clinching process considering the pre-forming of the parts ,”https://doi.org/10.1016/j.jajp.2020.100038__Journal of Advanced Joining Processes. , 2020, doi:https://doi.org/10.1016/j.jajp.2020.100038 .

C. Steinfelder and A. Brosius, “A New Approach for the Evaluation of Component and Joint Loads Based on Load Path Analysis,”10.1007/978-3-662-62138-7_14__Lecture Notes in Production Engineering, pp. 134–141, 2020, doi:10.1007/978-3-662-62138-7_14 .

H. Böhm, H. Zhang, B. Gröger, A. Hornig, and M. Gude, “Characterization and Numerical Modelling of Through-Thickness Metallic-Pin-Reinforced Fibre/Thermoplastic Composites under Bending Loading,”10.3390/jcs4040188__Journal of Composites Science, vol. 4, p. 188, 2020, doi:10.3390/jcs4040188 .

B. Sadeghian, C. Guilleaume, R. Lafarge, and A. Brosius, “Investigation of Clinched Joints – A Finite Element Simulation of a Non-destructive Approach,”10.1007/978-3-662-62138-7_12__Lecture Notes in Production Engineering, pp. 116–124, 2020, doi:10.1007/978-3-662-62138-7_12 .

L. Ewenz, S. Schettler, A. T. Zeuner, and M. Zimmermann, “Untersuchungen zum Einfluss von Geometrieparametern bei artgleichen Al-Clinchverbindungen auf das Ermüdungsverhalten im Bereich hoher bis sehr hoher Lastspielzahlen,”10.48447/WP-2020-039__Tagung Werkstoffprüfung 2020. Werkstoffe und Bauteile auf dem Prüfstand. Prüftechnik - Kennwertermit, 2020, doi:10.48447/WP-2020-039 .

O. Grydin, M. Stolbchenko, and M. Schaper, “Influence of Nozzle Shape on Near-Surface Segregation Formation During Twin-Roll Casting of Aluminum Strips,” in Light Metals 2020, Cham, 2020, pp. 1039–1044.

D. Köhler, B. Gröger, R. Kupfer, A. Hornig, and M. Gude, “Experimental and Numerical Studies on the Deformation of a Flexible Wire in an Injection Moulding Process,”10.1016/j.promfg.2020.04.288__Procedia Manufacturing, vol. 47, pp. 940–947, 2020, doi:10.1016/j.promfg.2020.04.288 .

C. Zirngibl, B. Schleich, and S. Wartzack, “Potentiale datengestützter Methoden zur Gestaltung und Optimierung mechanischer Fügeverbindungen,”10.35199/dfx2020.8__Proceedings of the 31st Symposium Design for X (D), 2020, doi:10.35199/dfx2020.8 .

D. Köhler, R. Kupfer, and M. Gude, “Clinching in in-situ CT—A numerical study on suitable tool materials,”10.1016/j.jajp.2020.100034__Journal of Advanced Joining Processes, vol. 2, p. 100034, 2020, doi:10.1016/j.jajp.2020.100034 .

M. Kraus and M. Merklein, “Potential of Joining Dissimilar Materials by Cold Formed Pin-Structures,”10.1016/j.jmatprotec.2020.116697__Journal of Materials Processing Technology, vol. 283, p. 116697, 2020, doi:10.1016/j.jmatprotec.2020.116697 .

C. R. Bielak, M. Böhnke, M. Bobbert, and G. Meschut, “Development of a numerical method for analyzing the robustness of clinching in versatile process chains,” presented at the Material Science and Engineering Congress - MSE 2020, Darmstadt.

S. Wituschek, C. M. Kuball, M. Merklein, and M. Lechner, “Test Method for Friction Characterization of Rivets,”10.4028/www.scientific.net/ddf.404.132__Defect and Diffusion Forum, vol. 404, pp. 132–137, 2020, doi:10.4028/www.scientific.net/ddf.404.132 .

D. Weiß, B. Schramm, and G. Kullmer, “Development of a special specimen geometry for the experimental determination of fracture mechanical parameters of clinchable metal sheets,”10.1016/j.prostr.2020.11.081__vol. 28. Elsevier, pp. 2335–2341, 2020, doi:10.1016/j.prostr.2020.11.081 .

D. Weiß, B. Schramm, and G. Kullmer, “Experimental and numerical preliminary investigations of the base material and preformed components regarding fatigue crack growth in joined structures,” presented at the Material Science and Engineering Congress - M, Darmstadt, 2020.

F. Kappe, S. Wituschek, M. Lechner, M. Bobbert, G. Meschut, and M. Merklein, “Investigation of influencing parameters on the joint formation of the self-piercing riveting process,” presented at the Material Science and Engineering Congress - MSE 2020, Darmstadt , 2020.

S. Martin, A. A. Camberg, and T. Tröster, “Probability Distribution of Joint Point Loadings in Car Body Structures under Global Bending and Torsion,”10.1016/j.promfg.2020.04.324__Procedia Manufacturing, pp. 419–424, 2020, doi:10.1016/j.promfg.2020.04.324 .

T. Rostek, E. Wiens, and W. Homberg, “Joining with Versatile Friction-Spun Joint Connectors,”10.1016/j.promfg.2020.04.313__Procedia Manufacturing, vol. 47, pp. 395–399, 2020, doi:10.1016/j.promfg.2020.04.313 .

D. Köhler, R. Kupfer, and M. Gude, “Clinching in in-situ CT—A numerical study on suitable tool materials,”10.1016/j.jajp.2020.100034__Journal of Advanced Joining Processes, vol. 2, Art. no. 100034, 2020, doi:10.1016/j.jajp.2020.100034 .

J. Friedlein, S. Wituschek, M. Lechner, J. Mergheim, and P. Steinmann, “Inverse parameter identification of an anisotropic plasticity model for sheet metal,”10.1088/1757-899X/1157/1/012004__IOP Conference Series: Materials Science and Engineering, vol. 1157, p. 012004, 2021, doi:10.1088/1757-899X/1157/1/012004 .

J. Popp, M. Wolf, T. Mattner, and D. Drummer, “Energy direction in ultrasonic impregnation of continuous fiber-reinforced thermoplastics,”10.3390/jcs5090239__Journal of Composites Science, vol. 5, p. 239, 2021, doi:10.3390/jcs5090239 .

J. Kalich and U. Füssel, “Influence of the production process on the binding mechanism of clinched aluminum steel mixed compounds,”10.3390/jmmp5040105__Journal of Manufacturing and Materials Processing, vol. 5, p. 105, 2021, doi:10.3390/jmmp5040105 .

D. Pivovarov, J. Mergheim, K. Willner, and P. Steinmann, “Stochastic local FEM for computational homogenization of heterogeneous materials exhibiting large plastic deformations,”10.1007/s00466-021-02099-x__Computational Mechanics, 2021, doi:10.1007/s00466-021-02099-x .

J. Friedlein, J. Mergheim, and P. Steinmann, “Anisotropic plasticitydamage material model for sheet metal — Regularised single surface formulation,”10.1002/pamm.202100068__PAMM, vol. 21, 2021, doi:10.1002/pamm.202100068 .

C. R. Bielak, M. Böhnke, M. Bobbert, and G. Meschut, “Further development of a numerical method for analyzing the load capacity of clinched joints in versatile process chains,”10.25518/esaform21.4298__presented at the ESAFORM 2021, Lüttich, doi:10.25518/esaform21.4298 .

D. Römisch, C. Zirngibl, B. Schleich, S. Wartzack, and M. Merklein, “Data-driven analysis of cold-formed pin structure characteristics in the context of versatile joining processes,”10.1088/1757-899X/1157/1/012077__IOP Conference Series: Materials Science and Engineering, vol. 1157, p. 012077, 2021, doi:10.1088/1757-899X/1157/1/012077 .

C. Steinfelder, J. Kalich, A. Brosius, and U. Füssel, “Numerical and experimental investigation of the transmission moment of clinching points,”10.1088/1757-899x/1157/1/012003__IOP Conference Series: Materials Science and Engineering, vol. 1157, p. 012003, 2021, doi:10.1088/1757-899x/1157/1/012003 .

J. Popp, T. Kleffel, D. Römisch, T. Papke, M. Merklein, and D. Drummer, “Fiber Orientation Mechanism of Continuous Fiber Reinforced Thermoplastics Hybrid Parts Joined with Metallic Pins,”10.1007/s10443-021-09892-0__Applied Composite Materials, vol. 28, pp. 951–972, 2021, doi:10.1007/s10443-021-09892-0 .

B. Gröger et al., “Clinching of Thermoplastic Composites and Metals—A Comparison of Three Novel Joining Technologies,”10.3390/ma14092286X__Materials, vol. 14, p. 2286, 2021, doi:10.3390/ma14092286X .

M. Busch and T. Hausotte, “Determination of the Interface Structural Resolution of an Industrial X-Ray Computed Tomograph Using a Spherical Specimen and a Gap Specimen Consisting of Gauge Blocks,”10.4028/www.scientific.net/kem.883.41__Key Engineering Materials, vol. 883, pp. 41–48, 2021, doi:10.4028/www.scientific.net/kem.883.41 .

D. Köhler, R. Kupfer, J. Troschitz, and M. Gude, “Clinching in In-situ CT – Experimental Study on Suitable Tool Materials,”10.25518/esaform21.2781__ESAFORM 2021, 2021, doi:10.25518/esaform21.2781 .

D. Köhler, R. Kupfer, J. Troschitz, and M. Gude, “In Situ Computed Tomography—Analysis of a Single-Lap Shear Test with Clinch Points,”10.3390/ma14081859__Materials, vol. 14, p. 1859, 2021, doi:10.3390/ma14081859 .

S. Wituschek and M. Lechner, “Friction Characterisation for a Tumbling Self-Piercing Riveting Process,”10.4028/www.scientific.net/kem.883.27__Key Engineering Materials, vol. 883, pp. 27–34, 2021, doi:10.4028/www.scientific.net/kem.883.27 .

C. Wischer, C. Steinfelder, W. Homberg, and A. Brosius, “Joining with Friction Spun Joint Connectors – Manufacturing and Analysis,”10.1088/1757-899x/1157/1/012007__IOP Conference Series: Materials Science and Engineering, vol. 1157, p. 012007, 2021, doi:10.1088/1757-899x/1157/1/012007 .

C. Wischer and W. Homberg, “A contribution on versatile process chains: joining with adaptive joining elements, formed by friction spinning,”10.1007/s11740-021-01094-8__Production Engineering, 2021, doi:10.1007/s11740-021-01094-8 .

D. Weiß, B. Schramm, and G. Kullmer, “Numerical and Experimental Fracture Mechanical Investigations of Clinchable Sheet Metals Made of HX,”10.4028/www.scientific.net/kem.883.127__Key Engineering Materials, vol. 883, pp. 127–132, 2021, doi:10.4028/www.scientific.net/kem.883.127 .

B. Gröger et al., “Computed tomography investigation of the material structure in clinch joints in aluminium fibre-reinforced thermoplastic sheets,”10.1007/s11740-021-01091-x__Production Engineering, 2021, doi:10.1007/s11740-021-01091-x .

D. Weiß, B. Schramm, and G. Kullmer, “Holistic investigation chain for the experimental determination of fracture mechanical material parameters with special specimens,”10.1007/s11740-021-01096-6__Production Engineering, 2021, doi:10.1007/s11740-021-01096-6 .

C. Zirngibl, B. Schleich, and S. Wartzack, “Approach for the automated and data-based design of mechanical joints,”10.1017/pds.2021.52__Proceedings of the Design Society, vol. 1, p. 521, 2021, doi:10.1017/pds.2021.52 .

C. Zirngibl, F. Dworschak, B. Schleich, and S. Wartzack, “Application of reinforcement learning for the optimization of clinch joint characteristics,”10.1007/s11740-021-01098-4__Production Engineering, 2021, doi:10.1007/s11740-021-01098-4 .

D. Römisch, J. Popp, D. Drummer, and M. Merklein, “Joining of CFRT-steel hybrid parts via hole-forming and subsequent pin caulking,”10.1007/s11740-021-01093-9__Production Engineering, 2021, doi:10.1007/s11740-021-01093-9 .

R. Lafarge, A. Wolf, C. Guilleaume, and A. Brosius, “A New Non-destructive Testing Method Applied to Clinching,”10.1007/978-3-030-75381-8_121__Minerals, Metals and Materials Series, p. 1461, 2021, doi:10.1007/978-3-030-75381-8_121 .

D. Römisch, M. Kraus, and M. Merklein, “Experimental study on joining by forming of hct590x + z and en-aw 6014 sheets using cold extruded pin structures,”10.3390/jmmp5010025__Journal of Manufacturing and Materials Processing, vol. 5, p. 25, 2021, doi:10.3390/jmmp5010025 .

D. Römisch, M. Kraus, and M. Merklein, “Investigation of Different Joining by Forming Strategies when Connecting Different Metals without Auxiliary Elements,”10.4028/www.scientific.net/kem.883.19__Key Engineering Materials, vol. 883, pp. 19–26, 2021, doi:10.4028/www.scientific.net/kem.883.19 .

S. Wituschek and M. Lechner, “Material characterisation methods for a tumbling self-piercing riveting process,”10.25518/esaform21.398__ESAFORM 2021, 2021, doi:10.25518/esaform21.398 .

D. Köhler, B. Sadeghian, R. Kupfer, J. Troschitz, M. Gude, and A. Brosius, “A Method for Characterization of Geometric Deviations in Clinch Points with Computed Tomography and Transient Dynamic Analysis,”10.4028/www.scientific.net/kem.883.89__Key Engineering Materials, vol. 883, pp. 89–96, 2021, doi:10.4028/www.scientific.net/kem.883.89 .

L. Ewenz, J. Kalich, M. Zimmermann, and U. Füssel, “Effect of Different Tool Geometries on the Mechanical Properties of Al-Al Clinch Joints,”10.4028/www.scientific.net/kem.883.65__Key Engineering Materials, vol. 883, pp. 65–72, 2021, doi:10.4028/www.scientific.net/kem.883.65 .

B. Gröger, A. Hornig, A. Hoog, and M. Gude, “Modelling of thermally supported clinching of fibre-reinforced thermoplastics: Approaches on mesoscale considering large deformations and fibre failure,”10.25518/esaform21.4293__ESAFORM 2021 - 24th International Conference on Material Forming, 2021, doi:10.25518/esaform21.4293 .

E. Wiens, C. Wischer, and W. Homberg, “Development of a novel adaptive joining technology employing friction-spun joint connectors (FSJC),”10.25518/esaform21.4682__ESAFORM, p. 4682, 2021, doi:10.25518/esaform21.4682 .

S. Harzheim, C. Steinfelder, T. Wallmersperger, and A. Brosius, “A First Approach for the Treatment of Galvanic Corrosion and of Load-Bearing Capacity of Clinched Joints,”10.4028/www.scientific.net/kem.883.97__Key Engineering Materials, vol. 883, pp. 97–104, 2021, doi:10.4028/www.scientific.net/kem.883.97 .

J. Friedlein, J. Mergheim, and P. Steinmann, “A finite plasticity gradient-damage model for sheet metals during forming and clinching,”10.4028/www.scientific.net/KEM.883.57__Key Engineering Materials, vol. 883 KEM, p. 57, 2021, doi:10.4028/www.scientific.net/KEM.883.57 .

B. Gröger, A. Hornig, A. Hoog, and M. Gude, “Temperature dependent modelling of fibre-reinforced thermoplastic organo-sheet material for forming and joining process simulations,”10.4028/www.scientific.net/KEM.883.49__Key Engineering Materials, vol. 883 KEM, p. 49, 2021, doi:10.4028/www.scientific.net/KEM.883.49 .

M. Hofmann, Y. Shi, and T. Wallmersperger, “A first Model of Fatigue Corrosion of a Metal through Hydrogen Embrittlement,”10.1002/pamm.202000122__PAMM, vol. 20, 2021, doi:10.1002/pamm.202000122 .

C. Zirngibl and B. Schleich, “Approach for the automated analysis of geometrical clinch joint characteristics,”10.4028/www.scientific.net/KEM.883.105__Key Engineering Materials, vol. 883 KEM, p. 105, 2021, doi:10.4028/www.scientific.net/KEM.883.105 .

D. Pivovarov, J. Mergheim, K. Willner, and P. Steinmann, “Parametric FEM for computational homogenization of heterogeneous materials with random voids,”10.1002/pamm.202000071__in PAMM, 2021, vol. 20, no. 1, doi:10.1002/pamm.202000071 .

M. Böhnke, M. S. Rossel, C. R. Bielak, M. Bobbert, and G. Meschut, “Concept development of a method for identifying friction coefficients for the numerical simulation of clinching processes,”10.1007/s00170-021-07986-4__The International Journal of Advanced Manufacturing Technology, 2021, doi:10.1007/s00170-021-07986-4 .

J. Popp, T. Kleffel, and D. Drummer, “Influence of pin geometry on the joint strength of CFRT-metal hybrid parts with metallic pins,” Joining Plastics, vol. 15, no. 3–4, 2021.

G. Kullmer, D. Weiß, and B. Schramm, “Entwicklung einer Methode zur differenzierten Messung des Wachstums der Rissenden von Innenrissen mit der Elektropotentialmethode,”10.48447/BR-2021-013__Bremen, 2021, vol. DVM-Bericht 253, pp. 107–116, doi:10.48447/BR-2021-013 .

D. Weiß, B. Schramm, M. Neuser, O. Grydin, and G. Kullmer, “Experimentelle bruchmechanische Untersuchung eines clinchgeeigneten Bleches aus HX mithilfe einer neuen Probengeometrie,”10.48447/BR-2021-025__Bremen, 2021, vol. DVM-Bericht 253, pp. 231–240, doi:10.48447/BR-2021-025 .

M. S. Rossel, M. Böhnke, C. R. Bielak, M. Bobbert, and G. Meschut, “Development of a Method for the Identification of Friction Coefficients in Sheet Metal Materials for the Numerical Simulation of Clinching Processes,”10.4028/www.scientific.net/kem.883.81__Key Engineering Materials, vol. 883, pp. 81–88, 2021, doi:10.4028/www.scientific.net/kem.883.81 .

F. Kappe, C. R. Bielak, V. Sartisson, M. Bobbert, and G. Meschut, “Influence of rivet length on joint formation on self-piercing riveting process considering further process parameters,”10.25518/esaform21.4277__2021, doi:10.25518/esaform21.4277 .

M. Böhnke, F. Kappe, M. Bobbert, and G. Meschut, “Influence of various procedures for the determination of flow curves on the predictive accuracy of numerical simulations for mechanical joining processes,”10.1515/mt-2020-0082__Materials Testing, vol. 63, no. 6, pp. 493–500, 2021, doi:10.1515/mt-2020-0082 .

F. Kappe, M. Bobbert, and G. Meschut, “New Approach for Versatile Self Piercing Riveting: Joining System and Auxiliary Part,”10.4028/www.scientific.net/kem.883.3__Key Engineering Materials, vol. 883, pp. 3–10, 2021, doi:10.4028/www.scientific.net/kem.883.3 .

S. Wituschek, F. Kappe, and M. Lechner, “Investigation of the influence of varying tumbling strategies on a tumbling self-piercing riveting process,”10.1007/s11740-021-01099-3__Production Engineering, 2021, doi:10.1007/s11740-021-01099-3 .

C. Steinfelder, S. Martin, A. Brosius, and T. Tröster, “Load Path Transmission in Joining Elements,”10.4028/www.scientific.net/kem.883.73__Key Engineering Materials, pp. 73–80, 2021, doi:10.4028/www.scientific.net/kem.883.73 .

S. Martin and T. Tröster, “Joint point loadings in car bodies – the influence of manufacturing tolerances and scatter in material properties,”10.25518/esaform21.3801__ESAFORM 2021, 2021, doi:10.25518/esaform21.3801 .

C. Wischer, E. Wiens, and W. Homberg, “Joining with versatile joining elements formed by friction spinning,”10.1016/j.jajp.2021.100060__Journal of Advanced Joining Processes, vol. 3, Art. no. 100060, 2021, doi:10.1016/j.jajp.2021.100060 .

D. Köhler, B. Sadeghian, R. Kupfer, J. Troschitz, M. Gude, and A. Brosius, “A Method for Characterization of Geometric Deviations in Clinch Points with Computed Tomography and Transient Dynamic Analysis,”10.4028/www.scientific.net/kem.883.89__Key Engineering Materials, vol. 883, pp. 89–96, 2021, doi:10.4028/www.scientific.net/kem.883.89 .

B. Gröger et al., “Computed tomography investigation of the material structure in clinch joints in aluminium fibre-reinforced thermoplastic sheets,”10.1007/s11740-021-01091-x__Production Engineering, vol. 16, no. 2–3, pp. 203–212, 2021, doi:10.1007/s11740-021-01091-x .

D. Köhler, R. Kupfer, J. Troschitz, and M. Gude, “In Situ Computed Tomography—Analysis of a Single-Lap Shear Test with Clinch Points,”10.3390/ma14081859__Materials, vol. 14, no. 8, Art. no. 1859, 2021, doi:10.3390/ma14081859 .

D. Köhler, R. Kupfer, J. Troschitz, and M. Gude, “Clinching in In-situ CT – Experimental Study on Suitable Tool Materials,”10.25518/esaform21.2781__ESAFORM 2021, 2021, doi:10.25518/esaform21.2781 .

D. Köhler, B. Sadeghian, J. Troschitz, R. Kupfer, M. Gude, and A. Brosius, “Characterisation of lateral offsets in clinch points with computed tomography and transient dynamic analysis,”10.1016/j.jajp.2021.100089__Journal of Advanced Joining Processes, vol. 5, Art. no. 100089, 2021, doi:10.1016/j.jajp.2021.100089 .

S. Martin, J. Schütte, C. Bäumler, W. Sextro, and T. Tröster, “Identification of joints for a load-adapted shape in a body in white using steady state vehicle simulations,”10.1016/j.finmec.2021.100065__Forces in Mechanics, vol. 6, Art. no. 100065, 2021, doi:10.1016/j.finmec.2021.100065 .

M. Neuser, O. Grydin, A. Andreiev, and M. Schaper, “Effect of Solidification Rates at Sand Casting on the Mechanical Joinability of a Cast Aluminium Alloy,”10.3390/met11081304__Metals, Art. no. 1304, 2021, doi:10.3390/met11081304 .

M. Neuser et al., “Joining suitability of cast aluminium for self-piercing riveting,”10.1088/1757-899x/1157/1/012005__IOP Conference Series: Materials Science and Engineering, Art. no. 012005, 2021, doi:10.1088/1757-899x/1157/1/012005 .

M. Neuser et al., “Mechanical Properties and Joinability of AlSi9 Alloy Manufactured by TwinRoll Casting,”10.1002/adem.202200874__Advanced Engineering Materials, vol. 24, no. 10, Art. no. 2200874, 2022, doi:10.1002/adem.202200874 .

J. Friedlein, J. Mergheim, and P. Steinmann, “Influence of Kinematic Hardening on Clinch Joining of Dual-Phase Steel HX Sheet Metal,” in The Minerals, Metals &;amp; Materials Series, Cham: Springer International Publishing, 2022.

L. Ewenz, C. R. Bielak, M. Otroshi, M. Bobbert, G. Meschut, and M. Zimmermann, “Numerical and experimental identification of fatigue crack initiation sites in clinched joints,”10.1007/s11740-022-01124-z__Production Engineering, vol. 16, no. 2–3, pp. 305–313, 2022, doi:10.1007/s11740-022-01124-z .

D. Köhler, R. Kupfer, J. Troschitz, and M. Gude, “Clinching in In Situ CT—A Novel Validation Method for Mechanical Joining Processes,” in The Minerals, Metals &; Materials Series, Cham: Springer International Publishing, 2022.

D. Römisch, M. Kraus, and M. Merklein, “Investigation of the influence of formed, non-rotationally symmetrical pin geometries and their effect on the joint quality of steel and aluminium sheets by direct pin pressing,”10.1177/14644207221081408__Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, vol. 236, no. 6, pp. 1187–1202, 2022, doi:10.1177/14644207221081408 .

J. Popp, D. Römisch, M. Merklein, and D. Drummer, “Joining of CFRT/Steel Hybrid Parts via Direct Pressing of Cold Formed Non-Rotational Symmetric Pin Structures,”10.3390/app12104962__Applied Sciences, vol. 12, no. 10, Art. no. 4962, 2022, doi:10.3390/app12104962 .

J. Troschitz, B. Gröger, V. Würfel, R. Kupfer, and M. Gude, “Joining Processes for Fibre-Reinforced Thermoplastics: Phenomena and Characterisation,”10.3390/ma15155454__Materials, vol. 15, no. 15, Art. no. 5454, 2022, doi:10.3390/ma15155454 .

F. Binder and T. Hausotte, “Über die Abgrenzung von Auflösungskonzepten in der industriellen Computertomografie,”10.1515/teme-2022-0065__tm - Technisches Messen, vol. 89, no. , pp. 20–24, 2022, doi:10.1515/teme-2022-0065 .

M. Busch, L. Butzhammer, and T. Hausotte, “Herausforderungen bei computertomografischen Untersuchungen von Fügeverbindungen,”10.1515/teme-2022-0061__tm - Technisches Messen, vol. 89, no. , pp. 83–88, 2022, doi:10.1515/teme-2022-0061 .

C. Zirngibl, C. Sauer, B. Schleich, and S. Wartzack, “Knowledge and Data-Based Design and Dimensioning of Mechanical Joining Connections,”10.1115/detc2022-89172__2022, doi:10.1115/detc2022-89172 .

C. Zirngibl, B. Schleich, and S. Wartzack, “Estimation of Clinch Joint Characteristics Based on Limited Input Data Using Pre-Trained Metamodels,”10.3390/ai3040059__AI, vol. 3, no. 4, pp. 990–1006, 2022, doi:10.3390/ai3040059 .

D. Köhler, B. Sadeghian, J. Troschitz, R. Kupfer, M. Gude, and A. Brosius, “Characterisation of lateral offsets in clinch points with computed tomography and transient dynamic analysis,”10.1016/j.jajp.2021.100089__Journal of Advanced Joining Processes, vol. 5, p. 100089, 2022, doi:10.1016/j.jajp.2021.100089 .

J. Popp and D. Drummer, “Joining of continuous fiber reinforced thermoplastic/steel hybrid parts via undercutting pin structures and infrared heating,”10.1016/j.jajp.2021.100084__Journal of Advanced Joining Processes, vol. 5, p. 100084, 2022, doi:10.1016/j.jajp.2021.100084 .

L. Ewenz, M. Kuczyk, and M. Zimmermann, “Effect of the tool geometry on microstructure and geometrical features of clinched aluminum,”10.1016/j.jajp.2021.100091__Journal of Advanced Joining Processes, vol. 5, 2022, doi:10.1016/j.jajp.2021.100091 .

B. Gröger, V. Würfel, A. Hornig, and M. Gude, “Forming process induced material structure of fibre-reinforced thermoplastics - Experimental and numerical investigation of a bladder-assisted moulding process,”10.1016/j.jajp.2022.100100__Journal of Advanced Joining Processes, vol. 5, 2022, doi:10.1016/j.jajp.2022.100100 .

S. Wituschek and M. Lechner, “Investigation of the influence of the tumbling angle on a tumbling self-piercing riveting process,”10.1177/14644207221080068__Production Engineering, 2022, doi:10.1177/14644207221080068 .

C. Steinfelder, J. Acksteiner, C. Guilleaume, and A. Brosius, “Analysis of the interactions between joint and component properties during clinching,”10.1007/s11740-021-01102-x__Production Engineering, 2022, doi:10.1007/s11740-021-01102-x .

M. Busch and T. Hausotte, “Application of an edge detection algorithm for surface determination in industrial X-ray computed tomography,”10.1007/s11740-021-01100-z__Production Engineering, 2022, doi:10.1007/s11740-021-01100-z .

J. Kalich and U. Füssel, “Design of clinched joints on the basis of binding mechanisms,”10.1007/s11740-022-01108-z__Production Engineering, 2022, doi:10.1007/s11740-022-01108-z .

J. Friedlein, J. Mergheim, and P. Steinmann, “Observations on additive plasticity in the logarithmic strain space at excessive strains,”10.1016/j.ijsolstr.2021.111416__International Journal of Solids and Structures, vol. 239–240, p. 111416, 2022, doi:10.1016/j.ijsolstr.2021.111416 .

S. Harzheim, L. Ewenz, M. Zimmermann, and T. Wallmersperger, “Corrosion Phenomena and Fatigue Behavior of Clinched Joints: Numerical and Experimental Investigations,”10.1016/j.jajp.2022.100130__Journal of Advanced Joining Processes, vol. 6, Art. no. 100130, 2022, doi:10.1016/j.jajp.2022.100130 .

A. T. Zeuner, L. Ewenz, J. Kalich, S. Schöne, U. Füssel, and M. Zimmermann, “The Influence of Heat Treatment on the Microstructure, Surface Roughness and Shear Tensile Strength of AISI 304 Clinch Joints,”10.3390/met12091514__Metals, vol. 12, no. 9, Art. no. 1514, 2022, doi:10.3390/met12091514 .

D. Römisch, C. Zirngibl, B. Schleich, S. Wartzack, and M. Merklein, “Robustness Analysis of Pin Joining,”10.3390/jmmp6050122__Journal of Manufacturing and Materials Processing, vol. 6, no. 5, Art. no. 122, 2022, doi:10.3390/jmmp6050122 .

A. Borowski, B. Gröger, R. Füßel, and M. Gude, “Characterisation of Fibre Bundle Deformation Behaviour—Test Rig, Results and Conclusions,”10.3390/jmmp6060146__Journal of Manufacturing and Materials Processing, vol. 6, no. 6, Art. no. 146, 2022, doi:10.3390/jmmp6060146 .

D. Römisch, A. Hetzel, S. Wituschek, M. Lechner, and M. Merklein, “Pin Extrusion for Mechanical Joining from Orbital Formed Tailored Blanks with Local Material Pre-Distribution,”10.3390/jmmp6060127__Journal of Manufacturing and Materials Processing, vol. 6, no. 6, Art. no. 127, 2022, doi:10.3390/jmmp6060127 .