Kullmer, Gunter, Deborah Weiß, and Britta Schramm. “An Alternative and Robust Formulation of the Fatigue Crack Growth Rate Curve for Long Cracks.”https://doi.org/10.1016/j.engfracmech.2023.109826__Engineering Fracture Mechanics 296 (2024).https://doi.org/10.1016/j.engfracmech.2023.109826 .
LibreCat: /record/51737
DOI: 10.1016/j.engfracmech.2023.109826

Kullmer, Gunter, Deborah Weiß, and Britta Schramm. “Weiterentwicklung des Exponentialansatzes zur Beschreibung von Rissfortschrittskurven.”https://doi.org/10.48447/BR-2024-369__Deutscher Verband für Materialforschung und –prüfung e.V., 2024.https://doi.org/10.48447/BR-2024-369 .
LibreCat: /record/53394
DOI: 10.48447/BR-2024-369

Busch, Matthias, and Tino Hausotte. “Simulation-Based Investigation of the Metrological Interface Structural Resolution Capability of X-Ray Computed Tomography Scanners.”https://doi.org/10.5194/jsss-12-1-2023__Journal of Sensors and Sensor Systems 12, no. 1 (2023): 1–8.https://doi.org/10.5194/jsss-12-1-2023 .
LibreCat: /record/36800
DOI: 10.5194/jsss-12-1-2023

Brosius, Alexander, Lars Ewenz, Richard Stephan, and Martina Zimmermann. “Anrisserkennung an Geclinchten Proben Während Einer Zyklischen Belastung Unter Nutzung Eines Scanning Laser Doppler Vibrometers.” In Tagung Werkstoffprüfung 2022, edited by Martina Zimmermann. Deutsche Gesellschaft für Materialkunde e.V. (DGM), 2023.
LibreCat: /record/38509

Ewenz, Lars, Martin Kuczyk, S.  Schöne, and Martina Zimmermann. “Ableitung Flacher Probengeometrien Zur Abbildung Mehraxialer Spannungszustände in Clinchverbindungen Unter Zyklischer Beanspruchung.” In Tagung Werkstoffprüfung 2022, edited by Martina Zimmermann. Deutsche Gesellschaft für Materialkunde e.V. (DGM), 2023.
LibreCat: /record/38511

Ewenz, Lars, R. Kühne, S. Schöne, and Martina Zimmermann. “Untersuchungen Zum Geometrie- Und Frequenzeinfluss Bei Der Ermittlung Zyklischer Kennwerte Geclinchter Überlappverbindungen.” In Tagung Werkstoffprüfung 2022, edited by Martina Zimmermann. Deutsche Gesellschaft für Materialkunde e.V. (DGM), 2023.
LibreCat: /record/38507

Wituschek, S., L. Elbel, and M. Lechner. “Versatile Self-Piercing Riveting with a Tumbling Superimposed Punch.”https://doi.org/10.21741/9781644902479-122__In Materials Research Proceedings. Materials Research Forum LLC, 2023.https://doi.org/10.21741/9781644902479-122 .
LibreCat: /record/46476
DOI: 10.21741/9781644902479-122

Köhler, Daniel, Robert Kupfer, Juliane Troschitz, and Maik Gude. “Comparison of Ex- and in-Situ Investigations of Clinched Single-Lap Shear Specimens.”https://doi.org/10.21741/9781644902417-20__In Materials Research Proceedings. Materials Research Forum LLC, 2023.https://doi.org/10.21741/9781644902417-20 .
LibreCat: /record/51190
DOI: 10.21741/9781644902417-20

Köhler, Daniel, Richard Stephan, Robert Kupfer, Juliane Troschitz, Alexander Brosius, and Maik Gude. “In-Situ Computed Tomography and Transient Dynamic Analysis of a Single-Lap Shear Test with a Composite-Metal Clinch Point.”https://doi.org/10.1007/978-3-031-18318-8_28__In Lecture Notes in Production Engineering. Cham: Springer International Publishing, 2023.https://doi.org/10.1007/978-3-031-18318-8_28 .
LibreCat: /record/51194
DOI: 10.1007/978-3-031-18318-8_28

Böhnke, Max, Christian Roman Bielak, Johannes Friedlein, Mathias Bobbert, Julia Mergheim, Paul Steinmann, and Gerson Meschut. “A Calibration Method for Failure Modeling in Clinching Process Simulations.”https://doi.org/10.21741/9781644902417-34__In Materials Research Proceedings. Materials Research Forum LLC, 2023.https://doi.org/10.21741/9781644902417-34 .
LibreCat: /record/43462
DOI: 10.21741/9781644902417-34

Friedlein, Johannes, Christian Roman Bielak, Max Böhnke, Mathias Bobbert, Julia Mergheim, Paul Steinmann, and Gerson Meschut. “Influence of Plastic Orthotropy on Clinching of Sheet Metal.”https://doi.org/10.21741/9781644902417-17 __In Materials Research Proceedings. Materials Research Forum LLC, 2023.https://doi.org/10.21741/9781644902417-17  .
LibreCat: /record/43463
DOI: 10.21741/9781644902417-17 

Bielak, Christian Roman, Max Böhnke, Mathias Bobbert, and Gerson Meschut. “Numerical Investigation of the Coupled Friction Behavior in the Clinching Process Chain.”https://doi.org/10.1007/978-3-031-41341-4_15__In Lecture Notes in Mechanical Engineering. Cham: Springer Nature Switzerland, 2023.https://doi.org/10.1007/978-3-031-41341-4_15 .
LibreCat: /record/52614
DOI: 10.1007/978-3-031-41341-4_15

Butzhammer, Lorenz, Fabian Kappe, Gerson Meschut, and Tinohttps://doi.org/10.21741/9781644902417-48__Hausotte. “Dynamic Conformity Assessment for Joining Force Monitoring Using Bayes Filters.”https://doi.org/10.21741/9781644902417-48__In Materials Research Proceedings. Materials Research Forum LLC, 2023.https://doi.org/10.21741/9781644902417-48 .
LibreCat: /record/52831
DOI: 10.21741/9781644902417-48

Wituschek, Simon, Fabian Kappe, Gerson Meschut, and Michael Lechner. “Combination of Versatile Self-Piercing Riveting Processes.”https://doi.org/10.21741/9781644902417-16__In Materials Research Proceedings. Materials Research Forum LLC, 2023.https://doi.org/10.21741/9781644902417-16 .
LibreCat: /record/52821
DOI: 10.21741/9781644902417-16

Weiß, Deborah, Tobias Duffe, Moritz Buczek, Gunter Kullmer, and Britta Schramm. “Bruchmechanische Untersuchung des Dualphasenstahls HX unter Temperatureinfluss.”https://doi.org/10.48447/WP-2023-244__Deutscher Verband für Materialforschung und -prüfung e.V., 2023.https://doi.org/10.48447/WP-2023-244 .
LibreCat: /record/51739
DOI: 10.48447/WP-2023-244

Neuser, Moritz, Fabian Kappe, Jakob Ostermeier, Jan Tobias Krüger, Mathias Bobbert, Gerson Meschut, Mirko Schaper, and Olexandr Grydin. “Mechanical Properties and Joinability of AlSi9 Alloy Manufactured by TwinRoll Casting.”https://doi.org/10.1002/adem.202200874__Advanced Engineering Materials 24, no. 10 (2022).https://doi.org/10.1002/adem.202200874 .
LibreCat: /record/34207
DOI: 10.1002/adem.202200874

Friedlein, Johannes, Julia Mergheim, and Paul Steinmann. “Influence of Kinematic Hardening on Clinch Joining of Dual-Phase Steel HX Sheet Metal.”https://doi.org/10.1007/978-3-031-06212-4_31__In The Minerals, Metals &;amp; Materials Series. Cham: Springer International Publishing, 2022.https://doi.org/10.1007/978-3-031-06212-4_31 .
LibreCat: /record/34211
DOI: 10.1007/978-3-031-06212-4_31

Ewenz, L., Christian Roman Bielak, Mortaza Otroshi, Mathias Bobbert, Gerson Meschut, and M. Zimmermann. “Numerical and Experimental Identification of Fatigue Crack Initiation Sites in Clinched Joints.”https://doi.org/10.1007/s11740-022-01124-z__Production Engineering 16, no. 2–3 (2022): 305–13.https://doi.org/10.1007/s11740-022-01124-z .
LibreCat: /record/34213
DOI: 10.1007/s11740-022-01124-z

Köhler, Daniel, Robert Kupfer, Juliane Troschitz, and Maik Gude. “Clinching in In Situ CT—A Novel Validation Method for Mechanical Joining Processes.”https://doi.org/10.1007/978-3-031-06212-4_75__In The Minerals, Metals &; Materials Series. Cham: Springer International Publishing, 2022.https://doi.org/10.1007/978-3-031-06212-4_75 .
LibreCat: /record/34212
DOI: 10.1007/978-3-031-06212-4_75

Römisch, David, Martin Kraus, and Marion Merklein. “Investigation of the Influence of Formed, Non-Rotationally Symmetrical Pin Geometries and Their Effect on the Joint Quality of Steel and Aluminium Sheets by Direct Pin Pressing.”https://doi.org/10.1177/14644207221081408__Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications 236, no. 6 (2022): 1187–1202.https://doi.org/10.1177/14644207221081408 .
LibreCat: /record/34219
DOI: 10.1177/14644207221081408

Popp, Julian, David Römisch, Marion Merklein, and Dietmar Drummer. “Joining of CFRT/Steel Hybrid Parts via Direct Pressing of Cold Formed Non-Rotational Symmetric Pin Structures.”https://doi.org/10.3390/app12104962__Applied Sciences 12, no. 10 (2022).https://doi.org/10.3390/app12104962 .
LibreCat: /record/34223
DOI: 10.3390/app12104962

Troschitz, Juliane, Benjamin Gröger, Veit Würfel, Robert Kupfer, and Maik Gude. “Joining Processes for Fibre-Reinforced Thermoplastics: Phenomena and Characterisation.”https://doi.org/10.3390/ma15155454__Materials 15, no. 15 (2022).https://doi.org/10.3390/ma15155454 .
LibreCat: /record/34225
DOI: 10.3390/ma15155454

Binder, Felix, and Tino Hausotte. “Über Die Abgrenzung von Auflösungskonzepten in Der Industriellen Computertomografie.”https://doi.org/10.1515/teme-2022-0065__Tm - Technisches Messen 89, no.https://doi.org/10.1515/teme-2022-0065__(2022): 20–24.https://doi.org/10.1515/teme-2022-0065 .
LibreCat: /record/34221
DOI: 10.1515/teme-2022-0065

Busch, Matthias, Lorenz Butzhammer, and Tino Hausotte. “Herausforderungen Bei Computertomografischen Untersuchungen von Fügeverbindungen.”https://doi.org/10.1515/teme-2022-0061__Tm - Technisches Messen 89, no.https://doi.org/10.1515/teme-2022-0061__(2022): 83–88.https://doi.org/10.1515/teme-2022-0061 .
LibreCat: /record/34220
DOI: 10.1515/teme-2022-0061

Zirngibl, Christoph, Christopher Sauer, Benjamin Schleich, and Sandro Wartzack. “Knowledge and Data-Based Design and Dimensioning of Mechanical Joining Connections.”https://doi.org/10.1115/detc2022-89172__In Volume 2: 42nd Computers and Information in Engineering Conference (CIE). American Society of Mechanical Engineers, 2022.https://doi.org/10.1115/detc2022-89172 .
LibreCat: /record/34415
DOI: 10.1115/detc2022-89172

Zirngibl, Christoph, Benjamin Schleich, and Sandro Wartzack. “Estimation of Clinch Joint Characteristics Based on Limited Input Data Using Pre-Trained Metamodels.”https://doi.org/10.3390/ai3040059__AI 3, no. 4 (2022): 990–1006.https://doi.org/10.3390/ai3040059 .
LibreCat: /record/34417
DOI: 10.3390/ai3040059

Köhler, D., B. Sadeghian, J. Troschitz, R. Kupfer, M. Gude, and A. Brosius. “Characterisation of Lateral Offsets in Clinch Points with Computed Tomography and Transient Dynamic Analysis.”https://doi.org/10.1016/j.jajp.2021.100089__Journal of Advanced Joining Processes 5 (2022): 100089.https://doi.org/10.1016/j.jajp.2021.100089 .
LibreCat: /record/30626
DOI: 10.1016/j.jajp.2021.100089

Popp, J., and D. Drummer. “Joining of Continuous Fiber Reinforced Thermoplastic/Steel Hybrid Parts via Undercutting Pin Structures and Infrared Heating.”https://doi.org/10.1016/j.jajp.2021.100084__Journal of Advanced Joining Processes 5 (2022): 100084.https://doi.org/10.1016/j.jajp.2021.100084 .
LibreCat: /record/30625
DOI: 10.1016/j.jajp.2021.100084

Ewenz, L., M. Kuczyk, and M. Zimmermann. “Effect of the Tool Geometry on Microstructure and Geometrical Features of Clinched Aluminum.”https://doi.org/10.1016/j.jajp.2021.100091__Journal of Advanced Joining Processes 5 (2022).https://doi.org/10.1016/j.jajp.2021.100091 .
LibreCat: /record/30624
DOI: 10.1016/j.jajp.2021.100091

Gröger, B., V. Würfel, A. Hornig, and M. Gude. “Forming Process Induced Material Structure of Fibre-Reinforced Thermoplastics - Experimental and Numerical Investigation of a Bladder-Assisted Moulding Process.”https://doi.org/10.1016/j.jajp.2022.100100__Journal of Advanced Joining Processes 5 (2022).https://doi.org/10.1016/j.jajp.2022.100100 .
LibreCat: /record/30622
DOI: 10.1016/j.jajp.2022.100100

Wituschek, S., and M. Lechner. “Investigation of the Influence of the Tumbling Angle on a Tumbling Self-Piercing Riveting Process.”https://doi.org/10.1177/14644207221080068__Production Engineering, 2022.https://doi.org/10.1177/14644207221080068 .
LibreCat: /record/30717
DOI: 10.1177/14644207221080068

Steinfelder, C., J. Acksteiner, C. Guilleaume, and A. Brosius. “Analysis of the Interactions between Joint and Component Properties during Clinching.”https://doi.org/10.1007/s11740-021-01102-x__Production Engineering, 2022.https://doi.org/10.1007/s11740-021-01102-x .
LibreCat: /record/30629
DOI: 10.1007/s11740-021-01102-x

Busch, M., and T. Hausotte. “Application of an Edge Detection Algorithm for Surface Determination in Industrial X-Ray Computed Tomography.”https://doi.org/10.1007/s11740-021-01100-z__Production Engineering, 2022.https://doi.org/10.1007/s11740-021-01100-z .
LibreCat: /record/30640
DOI: 10.1007/s11740-021-01100-z

Kalich, J., and U. Füssel. “Design of Clinched Joints on the Basis of Binding Mechanisms.”https://doi.org/10.1007/s11740-022-01108-z__Production Engineering, 2022.https://doi.org/10.1007/s11740-022-01108-z .
LibreCat: /record/30628
DOI: 10.1007/s11740-022-01108-z

Friedlein, J., J. Mergheim, and P. Steinmann. “Observations on Additive Plasticity in the Logarithmic Strain Space at Excessive Strains.”https://doi.org/10.1016/j.ijsolstr.2021.111416__International Journal of Solids and Structures 239–240 (2022): 111416.https://doi.org/10.1016/j.ijsolstr.2021.111416 .
LibreCat: /record/30627
DOI: 10.1016/j.ijsolstr.2021.111416

Harzheim, Sven, Lars Ewenz, Martina Zimmermann, and Thomas Wallmersperger. “Corrosion Phenomena and Fatigue Behavior of Clinched Joints: Numerical and Experimental Investigations.”https://doi.org/10.1016/j.jajp.2022.100130__Journal of Advanced Joining Processes 6 (2022).https://doi.org/10.1016/j.jajp.2022.100130 .
LibreCat: /record/34253
DOI: 10.1016/j.jajp.2022.100130

Zeuner, André Till, Lars Ewenz, Jan Kalich, Sebastian Schöne, Uwe Füssel, and Martina Zimmermann. “The Influence of Heat Treatment on the Microstructure, Surface Roughness and Shear Tensile Strength of AISI 304 Clinch Joints.”https://doi.org/10.3390/met12091514__Metals 12, no. 9 (2022).https://doi.org/10.3390/met12091514 .
LibreCat: /record/34252
DOI: 10.3390/met12091514

Römisch, David, Christoph Zirngibl, Benjamin Schleich, Sandro Wartzack, and Marion Merklein. “Robustness Analysis of Pin Joining.”https://doi.org/10.3390/jmmp6050122__Journal of Manufacturing and Materials Processing 6, no. 5 (2022).https://doi.org/10.3390/jmmp6050122 .
LibreCat: /record/34249
DOI: 10.3390/jmmp6050122

Borowski, Andreas, Benjamin Gröger, René Füßel, and Maik Gude. “Characterisation of Fibre Bundle Deformation Behaviour—Test Rig, Results and Conclusions.”https://doi.org/10.3390/jmmp6060146__Journal of Manufacturing and Materials Processing 6, no. 6 (2022).https://doi.org/10.3390/jmmp6060146 .
LibreCat: /record/34255
DOI: 10.3390/jmmp6060146

Römisch, David, Andreas Hetzel, Simon Wituschek, Michael Lechner, and Marion Merklein. “Pin Extrusion for Mechanical Joining from Orbital Formed Tailored Blanks with Local Material Pre-Distribution.”https://doi.org/10.3390/jmmp6060127__Journal of Manufacturing and Materials Processing 6, no. 6 (2022).https://doi.org/10.3390/jmmp6060127 .
LibreCat: /record/34248
DOI: 10.3390/jmmp6060127

Gröger, Benjamin, David Römisch, Martin Kraus, Juliane Troschitz, René Füßel, Marion Merklein, and Maik Gude. “Warmforming Flow Pressing Characteristics of Continuous Fibre Reinforced Thermoplastic Composites.”https://doi.org/10.3390/polym14225039__Polymers 14, no. 22 (2022).https://doi.org/10.3390/polym14225039 .
LibreCat: /record/34247
DOI: 10.3390/polym14225039

Gerritzen, Johannes, Andreas Hornig, Benjamin Gröger, and Maik Gude. “A Data Driven Modelling Approach for the Strain Rate Dependent 3D Shear Deformation and Failure of Thermoplastic Fibre Reinforced Composites: Experimental Characterisation and Deriving Modelling Parameters.”https://doi.org/10.3390/jcs6100318__Journal of Composites Science 6, no. 10 (2022).https://doi.org/10.3390/jcs6100318 .
LibreCat: /record/34256
DOI: 10.3390/jcs6100318

Schaude, Janik, and Tino Hausotte. “Atomic Force Microscope with an Adjustable Probe Direction and Integrated Sensing and Actuation.”https://doi.org/10.1007/s41871-022-00143-9__Nanomanufacturing and Metrology 5, no. 2 (2022): 139–48.https://doi.org/10.1007/s41871-022-00143-9 .
LibreCat: /record/34214
DOI: 10.1007/s41871-022-00143-9

Shi, Yuhao, Sven Harzheim, Martin Hofmann, and Thomas Wallmersperger. “A Damage Model for Corrosion Fatigue Due to Hydrogen Embrittlement.”https://doi.org/10.1007/978-3-030-97675-0_9__In Material Modeling and Structural Mechanics. Cham: Springer International Publishing, 2022.https://doi.org/10.1007/978-3-030-97675-0_9 .
LibreCat: /record/34209
DOI: 10.1007/978-3-030-97675-0_9

Kalich, Jan, Marcus Matzke, Wolfgang Pfeiffer, Stephan Schlegel, Ludwig Kornhuber, and Uwe Füssel. “Long-Term Behavior of Clinched Electrical Contacts.”https://doi.org/10.3390/met12101651__Metals 12, no. 10 (2022).https://doi.org/10.3390/met12101651 .
LibreCat: /record/34251
DOI: 10.3390/met12101651

Gröger, Benjamin, Jingjing Wang, Tim Bätzel, Andreas Hornig, and Maik Gude. “Modelling and Simulation Strategies for Fluid–Structure-Interactions of Highly Viscous Thermoplastic Melt and Single Fibres—A Numerical Study.”https://doi.org/10.3390/ma15207241__Materials 15, no. 20 (2022).https://doi.org/10.3390/ma15207241 .
LibreCat: /record/34254
DOI: 10.3390/ma15207241

Harzheim, Sven, Martin Hofmann, and Thomas Wallmersperger. “Comparison of Two Mesh-Moving Techniques for Finite Element Simulations of Galvanic Corrosion.”https://doi.org/10.1007/s00707-022-03326-z__Acta Mechanica 233, no. 11 (2022): 4427–39.https://doi.org/10.1007/s00707-022-03326-z .
LibreCat: /record/34257
DOI: 10.1007/s00707-022-03326-z

Füssel, Uwe, Stephan Schlegel, Gregor Reschke, and Jan Kalich. “Electrical Contacting of Aluminum Bus Bars Using Clinching and Functional Elements.”https://doi.org/10.3390/engproc2022026005__In SFU/ICAFT 2022. MDPI, 2022.https://doi.org/10.3390/engproc2022026005 .
LibreCat: /record/34250
DOI: 10.3390/engproc2022026005

Köhler, Daniel, Richard Stephan, Robert Kupfer, Juliane Troschitz, Alexander Brosius, and Maik Gude. “Investigations on Combined in Situ CT and Acoustic Analysis during Clinching.”https://doi.org/10.4028/p-32330d__In Key Engineering Materials, 926:1489–97. Trans Tech Publications, Ltd., 2022.https://doi.org/10.4028/p-32330d .
LibreCat: /record/34280
DOI: 10.4028/p-32330d

Zirngibl, Christoph, Benjamin Schleich, and Sandro Wartzack. “Robust Estimation of Clinch Joint Characteristics Based on Data-Driven Methods.”https://doi.org/10.1007/s00170-022-10441-7__The International Journal of Advanced Manufacturing Technology, 2022.https://doi.org/10.1007/s00170-022-10441-7 .
LibreCat: /record/34414
DOI: 10.1007/s00170-022-10441-7

Harzheim, Sven, Martin Hofmann, and Thomas Wallmersperger. “Numerical Fatigue Life Prediction of Corroded and Non-Corroded Clinched Joints.”https://doi.org/10.1080/15376494.2022.2140233__Mechanics of Advanced Materials and Structures, 2022, 1–6.https://doi.org/10.1080/15376494.2022.2140233 .
LibreCat: /record/34261
DOI: 10.1080/15376494.2022.2140233

Stephan, Richard, and Alexander Brosius. “Experimental Measurement Method and Evaluation of an Analytical Approach for Sound Conduction through Multiple Clinched Sheets.”https://doi.org/10.3390/engproc2022026025__In The 28th Saxon Conference on Forming Technology SFU and the 7th International Conference on Accuracy in Forming Technology ICAFT. MDPI, 2022.https://doi.org/10.3390/engproc2022026025 .
LibreCat: /record/36462
DOI: 10.3390/engproc2022026025

Römisch, David, and Marion Merklein. “Experimental and Numerical Analysis of Cold Formed Multi Pin Structures Using a Multi-Acting Tool Design,” 2022.
LibreCat: /record/36468

Wituschek, Simon, and Michael Lechner. “Versatile Tool Design for a Tumbling Self-Piercing Riveting Process,” 2022.
LibreCat: /record/36470

Busch, Matthias, Daniel  Köhler, Tino  Hausotte, Robert  Kupfer, Juliane  Troschitz, and Maik  Gude. “Approach to Determine the Characteristic Dimensions of Clinched Joints by Industrial X-Ray Computed Tomography,” 2022.
LibreCat: /record/36473

Butzhammer, Lorenz, Andreas Michael Müller, and Tino Hausotte. “Calibration of 3D Scan Trajectories for an Industrial Computed Tomography Setup with 6-DOF Object Manipulator System Using a Single Sphere.”https://doi.org/10.1088/1361-6501/ac9856__Measurement Science and Technology 34, no. 1 (2022).https://doi.org/10.1088/1361-6501/ac9856 .
LibreCat: /record/34264
DOI: 10.1088/1361-6501/ac9856

Böhnke, Max, Eduard Unruh, Stanislaw Sell, Mathias Bobbert, David Hein, and Gerson Meschut. “Functionality Study of an Optical Measurement Concept for Local Force Signal Determination in High Strain Rate Tensile Tests.”https://doi.org/10.4028/p-wpuzyw__Key Engineering Materials 926 (2022): 1564–72.https://doi.org/10.4028/p-wpuzyw .
LibreCat: /record/33002
DOI: 10.4028/p-wpuzyw

Böhnke, Max, Christian Roman Bielak, Mathias Bobbert, and Gerson Meschut. “Development of a Modified Punch Test for Investigating the Failure Behavior in Sheet Metal Materials.”https://doi.org/10.1007/978-3-031-06212-4_52__In The Minerals, Metals &;amp; Materials Series. Cham: Springer International Publishing, 2022.https://doi.org/10.1007/978-3-031-06212-4_52 .
LibreCat: /record/33003
DOI: 10.1007/978-3-031-06212-4_52

Böhnke, Max, Christian Roman Bielak, Mathias Bobbert, and Gerson Meschut. “Experimental and Numerical Investigation of the Influence of Multiaxial Loading Conditions on the Failure Behavior of Clinched Joints.”https://doi.org/10.1177/14644207221145886__Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 2022.https://doi.org/10.1177/14644207221145886 .
LibreCat: /record/34572
DOI: 10.1177/14644207221145886

Weiß, Deborah, and Britta Schramm. “Fracture Mechanical Investigation of Preformed Metal Sheets Using a Novel CC-Specimen.”https://doi.org/10.1016/j.prostr.2022.12.111__In Procedia Structural Integrity, 42:879–85. Elsevier BV, 2022.https://doi.org/10.1016/j.prostr.2022.12.111 .
LibreCat: /record/35271
DOI: 10.1016/j.prostr.2022.12.111

Meschut, Gerson, M. Merklein, A. Brosius, D. Drummer, L. Fratini, U. Füssel, M. Gude, et al. “Review on Mechanical Joining by Plastic Deformation.”https://doi.org/10.1016/j.jajp.2022.100113__Journal of Advanced Joining Processes 5 (2022).https://doi.org/10.1016/j.jajp.2022.100113 .
LibreCat: /record/34216
DOI: 10.1016/j.jajp.2022.100113

Wituschek, Simon, Fabian Kappe, Gerson Meschut, and Michael Lechner. “Geometric and Mechanical Joint Characterization of Conventionally  and Tumbled Self-Piercing Riveting Joints.”https://doi.org/10.1177/14644207221135400__Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 2022.https://doi.org/10.1177/14644207221135400 .
LibreCat: /record/34243
DOI: 10.1177/14644207221135400

Neuser, Moritz, Fabian Kappe, Jakob Ostermeier, Jan Tobias Krüger, Mathias Bobbert, Gerson Meschut, Mirko Schaper, and Olexandr Grydin. “Mechanical Properties and Joinability of AlSi9 Alloy Manufactured by TwinRoll Casting.”https://doi.org/10.1002/adem.202200874__Advanced Engineering Materials 24, no. 10 (2022).https://doi.org/10.1002/adem.202200874 .
LibreCat: /record/34242
DOI: 10.1002/adem.202200874

Oesterwinter, Annika, Christian Wischer, and Werner Homberg. “Identification of Requirements for FE Modeling of an Adaptive Joining Technology Employing Friction-Spun Joint Connectors (FSJC).”https://doi.org/10.3390/met12050869__Metals 12, no. 5 (2022).https://doi.org/10.3390/met12050869 .
LibreCat: /record/31360
DOI: 10.3390/met12050869

Joy, Tintu David, Deborah Weiß, Britta Schramm, and Gunter Kullmer. “Further Development of 3D Crack Growth Simulation Program to Include Contact Loading Situations.”https://doi.org/10.3390/app12157557__Applied Sciences 12, no. 15 (2022).https://doi.org/10.3390/app12157557 .
LibreCat: /record/34224
DOI: 10.3390/app12157557

Weiß, Deborah, Britta Schramm, and Gunter Kullmer. “Influence of Plane Mixed-Mode Loading on the Kinking Angle of Clinchable Metal Sheets.”https://doi.org/10.1016/j.prostr.2022.03.082__In Procedia Structural Integrity, 39:139–47. Elsevier BV, 2022.https://doi.org/10.1016/j.prostr.2022.03.082 .
LibreCat: /record/30726
DOI: 10.1016/j.prostr.2022.03.082

Schramm, Britta, Sven Harzheim, Deborah Weiß, Tintu David Joy, Martin Hofmann, Julia Mergheim, and Thomas Wallmersperger. “A Review on the Modeling of the Clinching Process Chain - Part III: Operational Phase.”https://doi.org/10.1016/j.jajp.2022.100135__Journal of Advanced Joining Processes, 2022.https://doi.org/10.1016/j.jajp.2022.100135 .
LibreCat: /record/34070
DOI: 10.1016/j.jajp.2022.100135

Kullmer, Gunter, Deborah Weiß, and Britta Schramm. “Development of a Method for the Separate Measurement of the Growth of Internal Crack Tips by Means of the Potential Drop Method.”https://doi.org/10.1016/j.engfracmech.2022.108899__Engineering Fracture Mechanics, 2022.https://doi.org/10.1016/j.engfracmech.2022.108899 .
LibreCat: /record/34246
DOI: 10.1016/j.engfracmech.2022.108899

Kappe, Fabian, Simon Wituschek, Mathias Bobbert, Michael Lechner, and Gerson Meschut. “Joining of Multi-Material Structures Using a Versatile Self-Piercing Riveting Process.”https://doi.org/10.1007/s11740-022-01151-w__Production Engineering, 2022.https://doi.org/10.1007/s11740-022-01151-w .
LibreCat: /record/34241
DOI: 10.1007/s11740-022-01151-w

Zirngibl, Christoph, Patricia Kügler, Julian Popp, Christian Roman Bielak, Mathias Bobbert, Dietmar Drummer, Gerson Meschut, Sandro Wartzack, and Benjamin Schleich. “Provision of Cross-Domain Knowledge in Mechanical Joining Using Ontologies.”https://doi.org/10.1007/s11740-022-01117-y__Production Engineering, 2022.https://doi.org/10.1007/s11740-022-01117-y .
LibreCat: /record/30100
DOI: 10.1007/s11740-022-01117-y

Kappe, Fabian, Simon Wituschek, Vincenzo de Pascalis, Mathias Bobbert, Michael Lechner, and Gerson Meschut. “Numerical Investigation of the Influence of a Movable Die Base on Joint Formation in Semi-Tubular Self-Piercing Riveting.”https://doi.org/10.1007/978-3-031-18130-6_10__In Materials Design and Applications IV. Cham: Springer International Publishing, 2022.https://doi.org/10.1007/978-3-031-18130-6_10 .
LibreCat: /record/34275
DOI: 10.1007/978-3-031-18130-6_10

Kappe, Fabian, Christoph Zirngibl, Benjamin Schleich, Mathias Bobbert, Sandro Wartzack, and Gerson Meschut. “Determining the Influence of Different Process Parameters on the Versatile Self-Piercing Riveting Process Using Numerical Methods.”https://doi.org/10.1016/j.jmapro.2022.11.019__Journal of Manufacturing Processes 84 (2022): 1438–48.https://doi.org/10.1016/j.jmapro.2022.11.019 .
LibreCat: /record/34244
DOI: 10.1016/j.jmapro.2022.11.019

Kappe, Fabian, Luca Schadow, Mathias Bobbert, and Gerson Meschut. “Increasing Flexibility of Self-Piercing Riveting by Reducing Tool–Geometry Combinations Using Cluster Analysis in the Application of Multi-Material Design.”https://doi.org/10.1177/14644207211070992__Proceedings of the Institution of Mechanical Engineers Part L Journal of Materials Design and Applications, 2022.https://doi.org/10.1177/14644207211070992 .
LibreCat: /record/29858
DOI: 10.1177/14644207211070992

Kappe, Fabian, Simon Wituschek, Mathias Bobbert, and Gerson Meschut. “Determining the Properties of Multirange Semitubular Selfpiercing Riveted Joints.”https://doi.org/10.1007/s11740-022-01105-2__Production Engineering, 2022.https://doi.org/10.1007/s11740-022-01105-2 .
LibreCat: /record/29857
DOI: https://doi.org/10.1007/s11740-022-01105-2

Schramm, Britta, and Deborah Weiß. “Fracture Mechanical Evaluation of the Material HX.”https://doi.org/10.1515/mt-2022-0191__Materials Testing 64, no. 10 (2022): 1437–49.https://doi.org/10.1515/mt-2022-0191 .
LibreCat: /record/34403
DOI: 10.1515/mt-2022-0191

Bielak, Christian Roman, Max Böhnke, Mathias Bobbert, and Gerson Meschut. “Development of a Numerical 3D Model for Analyzing Clinched Joints in Versatile Process Chains.”https://doi.org/10.1007/978-3-031-06212-4_15__In The Minerals, Metals &;amp; Materials Series. Cham: Springer International Publishing, 2022.https://doi.org/10.1007/978-3-031-06212-4_15 .
LibreCat: /record/34210
DOI: 10.1007/978-3-031-06212-4_15

Bielak, Christian Roman, Max Böhnke, Mathias Bobbert, and Gerson Meschut. “Numerical Investigation of a Friction  Test to Determine the Friction  Coefficients for the Clinching Process.”https://doi.org/10.1177/14644207221093468__Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 2022.https://doi.org/10.1177/14644207221093468 .
LibreCat: /record/30962
DOI: 10.1177/14644207221093468

Schramm, Britta, Sven Martin, Christian Steinfelder, Christian Roman Bielak, Alexander Brosius, Gerson Meschut, Thomas Tröster, Thomas Wallmersperger, and Julia Mergheim. “A Review on the Modeling of the Clinching Process Chain - Part I: Design Phase.”https://doi.org/10.1016/j.jajp.2022.100133__Journal of Advanced Joining Processes 6 (2022).https://doi.org/10.1016/j.jajp.2022.100133 .
LibreCat: /record/34069
DOI: 10.1016/j.jajp.2022.100133

Schramm, Britta, Johannes Friedlein, Benjamin Gröger, Christian Roman Bielak, Mathias Bobbert, Maik Gude, Gerson Meschut, Thomas Wallmersperger, and Julia Mergheim. “A Review on the Modeling of the Clinching Process Chain - Part II: Joining Process.”https://doi.org/10.1016/j.jajp.2022.100134__Journal of Advanced Joining Processes, 2022.https://doi.org/10.1016/j.jajp.2022.100134 .
LibreCat: /record/34068
DOI: 10.1016/j.jajp.2022.100134

Martin, Sven, Christian Roman Bielak, Mathias Bobbert, Thomas Tröster, and Gerson Meschut. “Numerical Investigation of the Clinched Joint Loadings Considering the Initial Pre-Strain in the Joining Area.”https://doi.org/10.1007/s11740-021-01103-w__Production Engineering, 2022.https://doi.org/10.1007/s11740-021-01103-w .
LibreCat: /record/29951
DOI: 10.1007/s11740-021-01103-w

Martin, Sven, Kristijan Kurtusic, and Thomas Tröster. “Influence of the Surrounding Sheet Geometry on a Clinched Joint.”https://doi.org/Â  https://doi.org/10.4028/p-09md1c__Key Engineering Materials 927 (2022).https://doi.org/Â  https://doi.org/10.4028/p-09md1c .
LibreCat: /record/32813
DOI:   https://doi.org/10.4028/p-09md1c

Köhler, Daniel, Richard Stephan, Robert Kupfer, Juliane Troschitz, Alexander Brosius, and Maik Gude. “Investigations on Combined &;lt;I&;gt;In Situ&;lt;/I&;gt; CT and Acoustic Analysis during Clinching.”https://doi.org/10.4028/p-32330d__Key Engineering Materials 926 (2022): 1489–97.https://doi.org/10.4028/p-32330d .
LibreCat: /record/51197
DOI: 10.4028/p-32330d

Busch, Matthias, Daniel Köhler, Tino Hausotte, Robert Kupfer, Juliane Troschitz, and Maik Gude. “Approach to Determine the Characteristic Dimensions of Clinched Joints by Industrial X-Ray Computed Tomography.”https://doi.org/10.58286/27519__E-Journal of Nondestructive Testing 27, no. 12 (2022).https://doi.org/10.58286/27519 .
LibreCat: /record/51192
DOI: 10.58286/27519

Köhler, Daniel, Robert Kupfer, Juliane Troschitz, and Maik Gude. “Untersuchung zum Einfluss radioopaker Zwischenschichten bei der in-situ CT geclinchter Verbindungen.” In Tagungsband zur Werkstoffprüfung 2022, edited by Martina Zimmermann. Dresden, 2022.
LibreCat: /record/51191

Köhler, Daniel, Robert Kupfer, Juliane Troschitz, and Maik Gude. “Clinching in In Situ CT—A Novel Validation Method for Mechanical Joining Processes.”https://doi.org/10.1007/978-3-031-06212-4_75__In The Minerals, Metals &;amp; Materials Series. Cham: Springer International Publishing, 2022.https://doi.org/10.1007/978-3-031-06212-4_75 .
LibreCat: /record/51195
DOI: 10.1007/978-3-031-06212-4_75

Neuser, Moritz, Max Böhnke, Olexandr Grydin, Mathias Bobbert, Mirko Schaper, and Gerson Meschut. “Influence of Heat Treatment on the Suitability for Clinching of the Aluminium Casting Alloy AlSi9.”https://doi.org/10.1177/14644207221075838__Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 2022.https://doi.org/10.1177/14644207221075838 .
LibreCat: /record/29724
DOI: 10.1177/14644207221075838

Neuser, Moritz, Olexandr Grydin, Y. Frolov, and Mirko Schaper. “Influence of Solidification Rates and Heat Treatment on the Mechanical Performance and Joinability of the Cast Aluminium Alloy AlSi10Mg.”https://doi.org/10.1007/s11740-022-01106-1__Production Engineering, 2022.https://doi.org/10.1007/s11740-022-01106-1 .
LibreCat: /record/29505
DOI: 10.1007/s11740-022-01106-1

Kupfer, Robert, Daniel Köhler, David Römisch, Simon Wituschek, Lars Ewenz, Jan Kalich, Deborah Weiß, et al. “Clinching of Aluminum Materials – Methods for the Continuous Characterization of Process, Microstructure and Properties.”https://doi.org/10.1016/j.jajp.2022.100108__Journal of Advanced Joining Processes 5 (2022).https://doi.org/10.1016/j.jajp.2022.100108 .
LibreCat: /record/31828
DOI: 10.1016/j.jajp.2022.100108

Grydin, Olexandr, Dag Mortensen, Moritz Neuser, Dag Lindholm, Hallvard G. Fjaer, and Mirko Schaper. “Numerical and Experimental Investigation of Heat Transfer in the Solidification-Deformation Zone During Twin-Roll Casting of Aluminum Strips.”https://doi.org/10.1007/978-3-030-92529-1_96__In Light Metals 2022. Cham: Springer International Publishing, 2022.https://doi.org/10.1007/978-3-030-92529-1_96 .
LibreCat: /record/29771
DOI: 10.1007/978-3-030-92529-1_96

Kupfer, Robert, Daniel Köhler, David Römisch, Simon Wituschek, Lars Ewenz, Jan Kalich, Deborah Weiß, et al. “Clinching of Aluminum Materials – Methods for the Continuous Characterization of Process, Microstructure and Properties.”https://doi.org/10.1016/j.jajp.2022.100108__Journal of Advanced Joining Processes 5 (2022).https://doi.org/10.1016/j.jajp.2022.100108 .
LibreCat: /record/34215
DOI: 10.1016/j.jajp.2022.100108

Friedlein, J., S. Wituschek, M. Lechner, J. Mergheim, and P. Steinmann. “Inverse Parameter Identification of an Anisotropic Plasticity Model for Sheet Metal.”https://doi.org/10.1088/1757-899X/1157/1/012004__IOP Conference Series: Materials Science and Engineering 1157 (2021): 012004.https://doi.org/10.1088/1757-899X/1157/1/012004 .
LibreCat: /record/30647
DOI: 10.1088/1757-899X/1157/1/012004

Popp, J., M. Wolf, T. Mattner, and D. Drummer. “Energy Direction in Ultrasonic Impregnation of Continuous Fiber-Reinforced Thermoplastics.”https://doi.org/10.3390/jcs5090239__Journal of Composites Science 5 (2021): 239.https://doi.org/10.3390/jcs5090239 .
LibreCat: /record/30645
DOI: 10.3390/jcs5090239

Kalich, J., and U. Füssel. “Influence of the Production Process on the Binding Mechanism of Clinched Aluminum Steel Mixed Compounds.”https://doi.org/10.3390/jmmp5040105__Journal of Manufacturing and Materials Processing 5 (2021): 105.https://doi.org/10.3390/jmmp5040105 .
LibreCat: /record/30643
DOI: 10.3390/jmmp5040105

Pivovarov, D., J. Mergheim, K. Willner, and P. Steinmann. “Stochastic Local FEM for Computational Homogenization of Heterogeneous Materials Exhibiting Large Plastic Deformations.”https://doi.org/10.1007/s00466-021-02099-x__Computational Mechanics, 2021.https://doi.org/10.1007/s00466-021-02099-x .
LibreCat: /record/30644
DOI: 10.1007/s00466-021-02099-x

Friedlein, J., J. Mergheim, and P. Steinmann. “Anisotropic Plasticitydamage Material Model for Sheet Metal — Regularised Single Surface Formulation.”https://doi.org/10.1002/pamm.202100068__PAMM 21 (2021).https://doi.org/10.1002/pamm.202100068 .
LibreCat: /record/30642
DOI: 10.1002/pamm.202100068

Bielak, Christian Roman, Max Böhnke, Mathias Bobbert, and Gerson Meschut. “Further Development of a Numerical Method for Analyzing the Load Capacity of Clinched Joints in Versatile Process Chains.”https://doi.org/10.25518/esaform21.4298__ESAFORM 2021, n.d.https://doi.org/10.25518/esaform21.4298 .
LibreCat: /record/20807
DOI: 10.25518/esaform21.4298

Römisch, D., C. Zirngibl, B. Schleich, S. Wartzack, and M. Merklein. “Data-Driven Analysis of Cold-Formed Pin Structure Characteristics in the Context of Versatile Joining Processes.”https://doi.org/10.1088/1757-899X/1157/1/012077__IOP Conference Series: Materials Science and Engineering 1157 (2021): 012077.https://doi.org/10.1088/1757-899X/1157/1/012077 .
LibreCat: /record/30650
DOI: 10.1088/1757-899X/1157/1/012077

Steinfelder, C., J. Kalich, A. Brosius, and U. Füssel. “Numerical and Experimental Investigation of the Transmission Moment of Clinching Points.”https://doi.org/10.1088/1757-899x/1157/1/012003__IOP Conference Series: Materials Science and Engineering 1157 (2021): 012003.https://doi.org/10.1088/1757-899x/1157/1/012003 .
LibreCat: /record/30648
DOI: 10.1088/1757-899x/1157/1/012003

Popp, J., T. Kleffel, D. Römisch, T. Papke, M. Merklein, and D. Drummer. “Fiber Orientation Mechanism of Continuous Fiber Reinforced Thermoplastics Hybrid Parts Joined with Metallic Pins.”https://doi.org/10.1007/s10443-021-09892-0__Applied Composite Materials 28 (2021): 951–972.https://doi.org/10.1007/s10443-021-09892-0 .
LibreCat: /record/30653
DOI: 10.1007/s10443-021-09892-0

Gröger, B., J. Troschitz, J. Vorderbrüggen, C. Vogel, R. Kupfer, G. Meschut, and M. Gude. “Clinching of Thermoplastic Composites and Metals—A Comparison of Three Novel Joining Technologies.”https://doi.org/10.3390/ma14092286X__Materials 14 (2021): 2286.https://doi.org/10.3390/ma14092286X .
LibreCat: /record/30652
DOI: 10.3390/ma14092286X

Busch, M., and T. Hausotte. “Determination of the Interface Structural Resolution of an Industrial X-Ray Computed Tomograph Using a Spherical Specimen and a Gap Specimen Consisting of Gauge Blocks.”https://doi.org/10.4028/www.scientific.net/kem.883.41__Key Engineering Materials 883 (2021): 41–48.https://doi.org/10.4028/www.scientific.net/kem.883.41 .
LibreCat: /record/30662
DOI: 10.4028/www.scientific.net/kem.883.41

Köhler, D., R. Kupfer, J. Troschitz, and M. Gude. “Clinching in In-Situ CT – Experimental Study on Suitable Tool Materials.”https://doi.org/10.25518/esaform21.2781__ESAFORM 2021, 2021.https://doi.org/10.25518/esaform21.2781 .
LibreCat: /record/30659
DOI: 10.25518/esaform21.2781

Köhler, D., R. Kupfer, J. Troschitz, and M. Gude. “In Situ Computed Tomography—Analysis of a Single-Lap Shear Test with Clinch Points.”https://doi.org/10.3390/ma14081859__Materials 14 (2021): 1859.https://doi.org/10.3390/ma14081859 .
LibreCat: /record/30661
DOI: 10.3390/ma14081859

Wituschek, S., and M. Lechner. “Friction Characterisation for a Tumbling Self-Piercing Riveting Process.”https://doi.org/10.4028/www.scientific.net/kem.883.27__Key Engineering Materials 883 (2021): 27–34.https://doi.org/10.4028/www.scientific.net/kem.883.27 .
LibreCat: /record/30719
DOI: 10.4028/www.scientific.net/kem.883.27

Wischer, Christian, Christian Steinfelder, Werner Homberg, and Alexander Brosius. “Joining with Friction Spun Joint Connectors – Manufacturing and Analysis.”https://doi.org/10.1088/1757-899x/1157/1/012007__IOP Conference Series: Materials Science and Engineering 1157 (2021): 012007.https://doi.org/10.1088/1757-899x/1157/1/012007 .
LibreCat: /record/30649
DOI: 10.1088/1757-899x/1157/1/012007

Wischer, Christian, and Werner Homberg. “A Contribution on Versatile Process Chains: Joining with Adaptive Joining Elements, Formed by Friction Spinning.”https://doi.org/10.1007/s11740-021-01094-8__Production Engineering, 2021.https://doi.org/10.1007/s11740-021-01094-8 .
LibreCat: /record/30702
DOI: 10.1007/s11740-021-01094-8

Weiß, D., B. Schramm, and G. Kullmer. “Numerical and Experimental Fracture Mechanical Investigations of Clinchable Sheet Metals Made of HX.”https://doi.org/10.4028/www.scientific.net/kem.883.127__Key Engineering Materials 883 (2021): 127–32.https://doi.org/10.4028/www.scientific.net/kem.883.127 .
LibreCat: /record/30680
DOI: 10.4028/www.scientific.net/kem.883.127

Gröger, B., D. Köhler, J. Vorderbrüggen, J. Troschitz, R. Kupfer, G. Meschut, and M. Gude. “Computed Tomography Investigation of the Material Structure in Clinch Joints in Aluminium Fibre-Reinforced Thermoplastic Sheets.”https://doi.org/10.1007/s11740-021-01091-x__Production Engineering, 2021.https://doi.org/10.1007/s11740-021-01091-x .
LibreCat: /record/30698
DOI: 10.1007/s11740-021-01091-x

Weiß, D., B. Schramm, and G. Kullmer. “Holistic Investigation Chain for the Experimental Determination of Fracture Mechanical Material Parameters with Special Specimens.”https://doi.org/10.1007/s11740-021-01096-6__Production Engineering, 2021.https://doi.org/10.1007/s11740-021-01096-6 .
LibreCat: /record/30699
DOI: 10.1007/s11740-021-01096-6

Zirngibl, C., B. Schleich, and S. Wartzack. “Approach for the Automated and Data-Based Design of Mechanical Joints.”https://doi.org/10.1017/pds.2021.52__Proceedings of the Design Society 1 (2021): 521.https://doi.org/10.1017/pds.2021.52 .
LibreCat: /record/30696
DOI: 10.1017/pds.2021.52

Zirngibl, C., F. Dworschak, B. Schleich, and S. Wartzack. “Application of Reinforcement Learning for the Optimization of Clinch Joint Characteristics.”https://doi.org/10.1007/s11740-021-01098-4__Production Engineering, 2021.https://doi.org/10.1007/s11740-021-01098-4 .
LibreCat: /record/30700
DOI: 10.1007/s11740-021-01098-4

Römisch, D., J. Popp, D. Drummer, and M. Merklein. “Joining of CFRT-Steel Hybrid Parts via Hole-Forming and Subsequent Pin Caulking.”https://doi.org/10.1007/s11740-021-01093-9__Production Engineering, 2021.https://doi.org/10.1007/s11740-021-01093-9 .
LibreCat: /record/30701
DOI: 10.1007/s11740-021-01093-9

Lafarge, R., A. Wolf, C. Guilleaume, and A. Brosius. “A New Non-Destructive Testing Method Applied to Clinching.”https://doi.org/10.1007/978-3-030-75381-8_121__Minerals, Metals and Materials Series, 2021, 1461.https://doi.org/10.1007/978-3-030-75381-8_121 .
LibreCat: /record/30697
DOI: 10.1007/978-3-030-75381-8_121

Römisch, D., M. Kraus, and M. Merklein. “Experimental Study on Joining by Forming of Hct590x + z and En-Aw 6014 Sheets Using Cold Extruded Pin Structures.”https://doi.org/10.3390/jmmp5010025__Journal of Manufacturing and Materials Processing 5 (2021): 25.https://doi.org/10.3390/jmmp5010025 .
LibreCat: /record/30684
DOI: 10.3390/jmmp5010025

Römisch, D., M. Kraus, and M. Merklein. “Investigation of Different Joining by Forming Strategies When Connecting Different Metals without Auxiliary Elements.”https://doi.org/10.4028/www.scientific.net/kem.883.19__Key Engineering Materials 883 (2021): 19–26.https://doi.org/10.4028/www.scientific.net/kem.883.19 .
LibreCat: /record/30682
DOI: 10.4028/www.scientific.net/kem.883.19

Wituschek, S., and M. Lechner. “Material Characterisation Methods for a Tumbling Self-Piercing Riveting Process.”https://doi.org/10.25518/esaform21.398__ESAFORM 2021, 2021.https://doi.org/10.25518/esaform21.398 .
LibreCat: /record/30718
DOI: 10.25518/esaform21.398

Köhler, D., B. Sadeghian, R. Kupfer, J. Troschitz, M. Gude, and A. Brosius. “A Method for Characterization of Geometric Deviations in Clinch Points with Computed Tomography and Transient Dynamic Analysis.”https://doi.org/10.4028/www.scientific.net/kem.883.89__Key Engineering Materials 883 (2021): 89–96.https://doi.org/10.4028/www.scientific.net/kem.883.89 .
LibreCat: /record/30683
DOI: 10.4028/www.scientific.net/kem.883.89

Ewenz, L., J. Kalich, M. Zimmermann, and U. Füssel. “Effect of Different Tool Geometries on the Mechanical Properties of Al-Al Clinch Joints.”https://doi.org/10.4028/www.scientific.net/kem.883.65__Key Engineering Materials 883 (2021): 65–72.https://doi.org/10.4028/www.scientific.net/kem.883.65 .
LibreCat: /record/30663
DOI: 10.4028/www.scientific.net/kem.883.65

Gröger, B., A. Hornig, A. Hoog, and M. Gude. “Modelling of Thermally Supported Clinching of Fibre-Reinforced Thermoplastics: Approaches on Mesoscale Considering Large Deformations and Fibre Failure.”https://doi.org/10.25518/esaform21.4293__ESAFORM 2021 - 24th International Conference on Material Forming, 2021.https://doi.org/10.25518/esaform21.4293 .
LibreCat: /record/30688
DOI: 10.25518/esaform21.4293

Wiens, E., C. Wischer, and W. Homberg. “Development of a Novel Adaptive Joining Technology Employing Friction-Spun Joint Connectors (FSJC).”https://doi.org/10.25518/esaform21.4682__ESAFORM, 2021, 4682.https://doi.org/10.25518/esaform21.4682 .
LibreCat: /record/30685
DOI: 10.25518/esaform21.4682

Harzheim, S., C. Steinfelder, T. Wallmersperger, and A. Brosius. “A First Approach for the Treatment of Galvanic Corrosion and of Load-Bearing Capacity of Clinched Joints.”https://doi.org/10.4028/www.scientific.net/kem.883.97__Key Engineering Materials 883 (2021): 97–104.https://doi.org/10.4028/www.scientific.net/kem.883.97 .
LibreCat: /record/30664
DOI: 10.4028/www.scientific.net/kem.883.97

Friedlein, J., J. Mergheim, and P. Steinmann. “A Finite Plasticity Gradient-Damage Model for Sheet Metals during Forming and Clinching.”https://doi.org/10.4028/www.scientific.net/KEM.883.57__Key Engineering Materials 883 KEM (2021): 57.https://doi.org/10.4028/www.scientific.net/KEM.883.57 .
LibreCat: /record/30694
DOI: 10.4028/www.scientific.net/KEM.883.57

Gröger, B., A. Hornig, A. Hoog, and M. Gude. “Temperature Dependent Modelling of Fibre-Reinforced Thermoplastic Organo-Sheet Material for Forming and Joining Process Simulations.”https://doi.org/10.4028/www.scientific.net/KEM.883.49__Key Engineering Materials 883 KEM (2021): 49.https://doi.org/10.4028/www.scientific.net/KEM.883.49 .
LibreCat: /record/30689
DOI: 10.4028/www.scientific.net/KEM.883.49

Hofmann, M., Y. Shi, and T. Wallmersperger. “A First Model of Fatigue Corrosion of a Metal through Hydrogen Embrittlement.”https://doi.org/10.1002/pamm.202000122__PAMM 20 (2021).https://doi.org/10.1002/pamm.202000122 .
LibreCat: /record/30720
DOI: 10.1002/pamm.202000122

Zirngibl, C., and B. Schleich. “Approach for the Automated Analysis of Geometrical Clinch Joint Characteristics.”https://doi.org/10.4028/www.scientific.net/KEM.883.105__Key Engineering Materials 883 KEM (2021): 105.https://doi.org/10.4028/www.scientific.net/KEM.883.105 .
LibreCat: /record/30695
DOI: 10.4028/www.scientific.net/KEM.883.105

Pivovarov, Dmytro, Julia Mergheim, Kai Willner, and Paul Steinmann. “Parametric FEM for Computational Homogenization of Heterogeneous Materials with Random Voids.”https://doi.org/10.1002/pamm.202000071__In PAMM, Vol. 20. Wiley, 2021.https://doi.org/10.1002/pamm.202000071 .
LibreCat: /record/34208
DOI: 10.1002/pamm.202000071

Böhnke, Max, Moritz Sebastian Rossel, Christian Roman Bielak, Mathias Bobbert, and Gerson Meschut. “Concept Development of a Method for Identifying Friction Coefficients for the Numerical Simulation of Clinching Processes.”https://doi.org/10.1007/s00170-021-07986-4__The International Journal of Advanced Manufacturing Technology, 2021.https://doi.org/10.1007/s00170-021-07986-4 .
LibreCat: /record/25556
DOI: 10.1007/s00170-021-07986-4

Popp, Julian, Tobias Kleffel, and Dietmar Drummer. “Influence of Pin Geometry on the Joint Strength of CFRT-Metal Hybrid Parts with Metallic Pins.” Joining Plastics 15, no. 3–4 (2021).
LibreCat: /record/38517

Kullmer, Gunter, Deborah Weiß, and Britta Schramm. “Entwicklung einer Methode zur differenzierten Messung des Wachstums der Rissenden von Innenrissen mit der Elektropotentialmethode,”https://doi.org/10.48447/BR-2021-013__DVM-Bericht 253:107–16, 2021.https://doi.org/10.48447/BR-2021-013 .
LibreCat: /record/34472
DOI: 10.48447/BR-2021-013

Weiß, Deborah, Britta Schramm, Moritz Neuser, Olexandr Grydin, and Gunter Kullmer. “Experimentelle bruchmechanische Untersuchung eines clinchgeeigneten Bleches aus HX mithilfe einer neuen Probengeometrie,”https://doi.org/10.48447/BR-2021-025__DVM-Bericht 253:231–40, 2021.https://doi.org/10.48447/BR-2021-025 .
LibreCat: /record/24006
DOI: 10.48447/BR-2021-025

Rossel, Moritz Sebastian, Max Böhnke, Christian Roman Bielak, Mathias Bobbert, and Gerson Meschut. “Development of a Method for the Identification of Friction Coefficients in Sheet Metal Materials for the Numerical Simulation of Clinching Processes.”https://doi.org/10.4028/www.scientific.net/kem.883.81__Key Engineering Materials 883 (2021): 81–88.https://doi.org/10.4028/www.scientific.net/kem.883.81 .
LibreCat: /record/34227
DOI: 10.4028/www.scientific.net/kem.883.81

Kappe, Fabian, Christian Roman Bielak, Vadim Sartisson, Mathias Bobbert, and Gerson Meschut. “Influence of rivet length on joint formation on self-piercing riveting process considering further process parameters.”https://doi.org/10.25518/esaform21.4277__In ESAFORM 2021. University of Liege, 2021.https://doi.org/10.25518/esaform21.4277 .
LibreCat: /record/34222
DOI: 10.25518/esaform21.4277

Böhnke, Max, Fabian Kappe, Mathias Bobbert, and Gerson Meschut. “Influence of Various Procedures for the Determination of Flow Curves on the Predictive Accuracy of Numerical Simulations for Mechanical Joining Processes.”https://doi.org/10.1515/mt-2020-0082__Materials Testing 63, no. 6 (2021): 493–500.https://doi.org/10.1515/mt-2020-0082 .
LibreCat: /record/22798
DOI: 10.1515/mt-2020-0082

Kappe, Fabian, Mathias Bobbert, and Gerson Meschut. “New Approach for Versatile Self Piercing Riveting: Joining System and Auxiliary Part.”https://doi.org/10.4028/www.scientific.net/kem.883.3__Key Engineering Materials 883 (2021): 3–10.https://doi.org/10.4028/www.scientific.net/kem.883.3 .
LibreCat: /record/34226
DOI: 10.4028/www.scientific.net/kem.883.3

Wituschek, Simon, Fabian Kappe, and Michael Lechner. “Investigation of the Influence of Varying Tumbling Strategies on a Tumbling Self-Piercing Riveting Process.”https://doi.org/10.1007/s11740-021-01099-3__Production Engineering, 2021.https://doi.org/10.1007/s11740-021-01099-3 .
LibreCat: /record/30200
DOI: 10.1007/s11740-021-01099-3

Steinfelder, Christian, Sven Martin, Alexander Brosius, and Thomas Tröster. “Load Path Transmission in Joining Elements.”https://doi.org/10.4028/www.scientific.net/kem.883.73__Key Engineering Materials, 2021, 73–80.https://doi.org/10.4028/www.scientific.net/kem.883.73 .
LibreCat: /record/24541
DOI: 10.4028/www.scientific.net/kem.883.73

Martin, Sven, and Thomas Tröster. “Joint point loadings in car bodies – the influence of manufacturing tolerances and scatter in material properties.”https://doi.org/10.25518/esaform21.3801__ESAFORM 2021, 2021.https://doi.org/10.25518/esaform21.3801 .
LibreCat: /record/24548
DOI: 10.25518/esaform21.3801

Wischer, Christian, Eugen Wiens, and Werner Homberg. “Joining with Versatile Joining Elements Formed by Friction Spinning.”https://doi.org/10.1016/j.jajp.2021.100060__Journal of Advanced Joining Processes 3 (2021).https://doi.org/10.1016/j.jajp.2021.100060 .
LibreCat: /record/26082
DOI: 10.1016/j.jajp.2021.100060

Köhler, Daniel, Behdad Sadeghian, Robert Kupfer, Juliane Troschitz, Maik Gude, and Alexander Brosius. “A Method for Characterization of Geometric Deviations in Clinch Points with Computed Tomography and Transient Dynamic Analysis.”https://doi.org/10.4028/www.scientific.net/kem.883.89__Key Engineering Materials 883 (2021): 89–96.https://doi.org/10.4028/www.scientific.net/kem.883.89 .
LibreCat: /record/51202
DOI: 10.4028/www.scientific.net/kem.883.89

Gröger, Benjamin, Daniel Köhler, Julian Vorderbrüggen, Juliane Troschitz, Robert Kupfer, Gerson Meschut, and Maik Gude. “Computed Tomography Investigation of the Material Structure in Clinch Joints in Aluminium Fibre-Reinforced Thermoplastic Sheets.”https://doi.org/10.1007/s11740-021-01091-x__Production Engineering 16, no. 2–3 (2021): 203–12.https://doi.org/10.1007/s11740-021-01091-x .
LibreCat: /record/51199
DOI: 10.1007/s11740-021-01091-x

Köhler, Daniel, Robert Kupfer, Juliane Troschitz, and Maik Gude. “In Situ Computed Tomography—Analysis of a Single-Lap Shear Test with Clinch Points.”https://doi.org/10.3390/ma14081859__Materials 14, no. 8 (2021).https://doi.org/10.3390/ma14081859 .
LibreCat: /record/51200
DOI: 10.3390/ma14081859

Köhler, Daniel, Robert Kupfer, Juliane Troschitz, and Maik Gude. “Clinching in In-situ CT – Experimental Study on Suitable Tool Materials.”https://doi.org/10.25518/esaform21.2781__ESAFORM 2021, 2021.https://doi.org/10.25518/esaform21.2781 .
LibreCat: /record/51201
DOI: 10.25518/esaform21.2781

Köhler, D., B. Sadeghian, J. Troschitz, R. Kupfer, M. Gude, and A. Brosius. “Characterisation of Lateral Offsets in Clinch Points with Computed Tomography and Transient Dynamic Analysis.”https://doi.org/10.1016/j.jajp.2021.100089__Journal of Advanced Joining Processes 5 (2021).https://doi.org/10.1016/j.jajp.2021.100089 .
LibreCat: /record/51198
DOI: 10.1016/j.jajp.2021.100089

Neuser, Moritz, Olexandr Grydin, Anatolii Andreiev, and Mirko Schaper. “Effect of Solidification Rates at Sand Casting on the Mechanical Joinability of a Cast Aluminium Alloy.”https://doi.org/10.3390/met11081304__Metals, 2021.https://doi.org/10.3390/met11081304 .
LibreCat: /record/24535
DOI: 10.3390/met11081304

Neuser, Moritz, Fabian Kappe, M Busch, Olexandr Grydin, Mathias Bobbert, Mirko Schaper, Gerson Meschut, and T Hausotte. “Joining Suitability of Cast Aluminium for Self-Piercing Riveting.”https://doi.org/10.1088/1757-899x/1157/1/012005__IOP Conference Series: Materials Science and Engineering, 2021.https://doi.org/10.1088/1757-899x/1157/1/012005 .
LibreCat: /record/24537
DOI: 10.1088/1757-899x/1157/1/012005

Martin, Sven, Jan Schütte, C. Bäumler, Walter Sextro, and Thomas Tröster. “Identification of Joints for a Load-Adapted Shape in a Body in White Using Steady State Vehicle Simulations.”https://doi.org/10.1016/j.finmec.2021.100065__Forces in Mechanics 6 (2021).https://doi.org/10.1016/j.finmec.2021.100065 .
LibreCat: /record/29293
DOI: 10.1016/j.finmec.2021.100065

Bielak, Christian Roman, Max Böhnke, Robert Beck, Mathias Bobbert, and Gerson Meschut. “Numerical Analysis of the Robustness of Clinching Process Considering the Pre-Forming of the Parts .”https://doi.org/10.1016/j.jajp.2020.100038__Journal of Advanced Joining Processes. , 2020.https://doi.org/10.1016/j.jajp.2020.100038 .
LibreCat: /record/20678
DOI: https://doi.org/10.1016/j.jajp.2020.100038

Steinfelder, C., and A. Brosius. “A New Approach for the Evaluation of Component and Joint Loads Based on Load Path Analysis.”https://doi.org/10.1007/978-3-662-62138-7_14__Lecture Notes in Production Engineering, 2020, 134–41.https://doi.org/10.1007/978-3-662-62138-7_14 .
LibreCat: /record/30706
DOI: 10.1007/978-3-662-62138-7_14

Böhm, H., H. Zhang, B. Gröger, A. Hornig, and M. Gude. “Characterization and Numerical Modelling of Through-Thickness Metallic-Pin-Reinforced Fibre/Thermoplastic Composites under Bending Loading.”https://doi.org/10.3390/jcs4040188__Journal of Composites Science 4 (2020): 188.https://doi.org/10.3390/jcs4040188 .
LibreCat: /record/30704
DOI: 10.3390/jcs4040188

Sadeghian, B., C. Guilleaume, R. Lafarge, and A. Brosius. “Investigation of Clinched Joints – A Finite Element Simulation of a Non-Destructive Approach.”https://doi.org/10.1007/978-3-662-62138-7_12__Lecture Notes in Production Engineering, 2020, 116–24.https://doi.org/10.1007/978-3-662-62138-7_12 .
LibreCat: /record/30707
DOI: 10.1007/978-3-662-62138-7_12

Ewenz, L., S. Schettler, A. T. Zeuner, and M. Zimmermann. “Untersuchungen Zum Einfluss von Geometrieparametern Bei Artgleichen Al-Clinchverbindungen Auf Das Ermüdungsverhalten Im Bereich Hoher Bis Sehr Hoher Lastspielzahlen.”https://doi.org/10.48447/WP-2020-039__Tagung Werkstoffprüfung 2020. Werkstoffe Und Bauteile Auf Dem Prüfstand. Prüftechnik - Kennwertermit, 2020.https://doi.org/10.48447/WP-2020-039 .
LibreCat: /record/30711
DOI: 10.48447/WP-2020-039

Grydin, Olexandr, Mykhailo Stolbchenko, and Mirko Schaper. “Influence of Nozzle Shape on Near-Surface Segregation Formation During Twin-Roll Casting of Aluminum Strips.”https://doi.org/10.1007/978-3-030-36408-3_141__In Light Metals 2020, 1039–44. Cham, 2020.https://doi.org/10.1007/978-3-030-36408-3_141 .
LibreCat: /record/24575
DOI: 10.1007/978-3-030-36408-3_141

Köhler, D., B. Gröger, R. Kupfer, A. Hornig, and M. Gude. “Experimental and Numerical Studies on the Deformation of a Flexible Wire in an Injection Moulding Process.”https://doi.org/10.1016/j.promfg.2020.04.288__Procedia Manufacturing 47 (2020): 940–47.https://doi.org/10.1016/j.promfg.2020.04.288 .
LibreCat: /record/30712
DOI: 10.1016/j.promfg.2020.04.288

Zirngibl, C., B. Schleich, and S. Wartzack. “Potentiale Datengestützter Methoden Zur Gestaltung Und Optimierung Mechanischer Fügeverbindungen.”https://doi.org/10.35199/dfx2020.8__Proceedings of the 31st Symposium Design for X (D), 2020.https://doi.org/10.35199/dfx2020.8 .
LibreCat: /record/30710
DOI: 10.35199/dfx2020.8

Köhler, D., R. Kupfer, and M. Gude. “Clinching in In-Situ CT—A Numerical Study on Suitable Tool Materials.”https://doi.org/10.1016/j.jajp.2020.100034__Journal of Advanced Joining Processes 2 (2020): 100034.https://doi.org/10.1016/j.jajp.2020.100034 .
LibreCat: /record/30709
DOI: 10.1016/j.jajp.2020.100034

Kraus, M., and M. Merklein. “Potential of Joining Dissimilar Materials by Cold Formed Pin-Structures.”https://doi.org/10.1016/j.jmatprotec.2020.116697__Journal of Materials Processing Technology 283 (2020): 116697.https://doi.org/10.1016/j.jmatprotec.2020.116697 .
LibreCat: /record/30703
DOI: 10.1016/j.jmatprotec.2020.116697

Bielak, Christian Roman, Max Böhnke, Mathias Bobbert, and Gerson Meschut. “Development of a numerical method for analyzing the robustness of clinching in versatile process chains.” Material Science and Engineering Congress - MSE 2020, n.d.
LibreCat: /record/20344

Wituschek, S., C. M. Kuball, M. Merklein, and M. Lechner. “Test Method for Friction Characterization of Rivets.”https://doi.org/10.4028/www.scientific.net/ddf.404.132__Defect and Diffusion Forum 404 (2020): 132–37.https://doi.org/10.4028/www.scientific.net/ddf.404.132 .
LibreCat: /record/30721
DOI: 10.4028/www.scientific.net/ddf.404.132

Weiß, Deborah, Britta Schramm, and Gunter Kullmer. “Development of a Special Specimen Geometry for the Experimental Determination of Fracture Mechanical Parameters of Clinchable Metal Sheets.”https://doi.org/10.1016/j.prostr.2020.11.081__Procedia Structural Integrity . Elsevier, 2020.https://doi.org/10.1016/j.prostr.2020.11.081 .
LibreCat: /record/23980
DOI: 10.1016/j.prostr.2020.11.081

Weiß, Deborah, Britta Schramm, and Gunter Kullmer. “Experimental and Numerical Preliminary Investigations of the Base Material and Preformed Components Regarding Fatigue Crack Growth in Joined Structures,” 2020.
LibreCat: /record/23982

Kappe, Fabian, Simon Wituschek, Michael Lechner, Mathias Bobbert, Gerson Meschut, and Marion Merklein. “Investigation of Influencing Parameters on the Joint Formation of the Self-Piercing Riveting Process,” 2020.
LibreCat: /record/20680

Martin, Sven, Alan A. Camberg, and Thomas Tröster. “Probability Distribution of Joint Point Loadings in Car Body Structures under Global Bending and Torsion.”https://doi.org/10.1016/j.promfg.2020.04.324__Procedia Manufacturing, 2020, 419–24.https://doi.org/10.1016/j.promfg.2020.04.324 .
LibreCat: /record/16859
DOI: 10.1016/j.promfg.2020.04.324

Rostek, Tim, Eugen Wiens, and Werner Homberg. “Joining with Versatile Friction-Spun Joint Connectors.”https://doi.org/10.1016/j.promfg.2020.04.313__Procedia Manufacturing 47 (2020): 395–99.https://doi.org/10.1016/j.promfg.2020.04.313 .
LibreCat: /record/30713
DOI: 10.1016/j.promfg.2020.04.313

Köhler, Daniel, Robert Kupfer, and Maik Gude. “Clinching in In-Situ CT—A Numerical Study on Suitable Tool Materials.”https://doi.org/10.1016/j.jajp.2020.100034__Journal of Advanced Joining Processes 2 (2020).https://doi.org/10.1016/j.jajp.2020.100034 .
LibreCat: /record/51203
DOI: 10.1016/j.jajp.2020.100034

Kraus, M., P. Frey, T. Kleffel, D. Drummer, and M. Merklein. “Mechanical Joining without Auxiliary Element by Cold Formed Pins for Multi-Material-Systems.”https://doi.org/10.1063/1.5112570__AIP Conference Proceedings 2113 (2019): 050006.https://doi.org/10.1063/1.5112570 .
LibreCat: /record/30716
DOI: 10.1063/1.5112570