R.-S. Götte and J. Timmermann, “Composed Physics- and Data-driven System Identification for Non-autonomous Systems in Control Engineering,”10.1109/AIRC56195.2022.9836982__in 2022 3rd International Conference on Artificial Intelligence, Robotics and Control (AIRC), Cairo, Egypt, 2022, pp. 67–76, doi:10.1109/AIRC56195.2022.9836982 .
LibreCat: /record/26539
DOI: 10.1109/AIRC56195.2022.9836982

S. Schütz, R. Schmidt, C. Henke, and A. Trächtler, “Virtual Commissioning of the Trajectory Tracking Control of a Sensor-Guided, Kinematically Redundant Robotic Welding System on a PLC,”10.1109/syscon53536.2022.9773878__in 2022 IEEE International Systems Conference (SysCon), Montreal, QC, Canada, 2022, pp. 1–8, doi:10.1109/syscon53536.2022.9773878 .
LibreCat: /record/33469
DOI: 10.1109/syscon53536.2022.9773878

C. Lenz, F. Hanke, C. Henke, and A. Trächtler, “Anomaly Detection in Hot Forming Processes using Hybrid Modeling - Part II,”10.1109/ETFA52439.2022.9921510__presented at the 2022 IEEE 27th International Conference on Emerging Technologies and Factory Automation (ETFA), Stuttgart, Germany , 2022, doi:10.1109/ETFA52439.2022.9921510 .
LibreCat: /record/33976
DOI: 10.1109/ETFA52439.2022.9921510

L. Simo Kamga, D. Meffert, B. Magyar, M. Oehler, and B. Sauer, “Simulative investigation of the influence of surface texturing on the elastohydrodynamic lubrication in chain joints,”https://doi.org/10.1016/j.triboint.2022.107564__Tribology International, vol. 171, p. 107564, 2022, doi:https://doi.org/10.1016/j.triboint.2022.107564 .
LibreCat: /record/34434
DOI: https://doi.org/10.1016/j.triboint.2022.107564

S. Neumann, G. Meschut, M. Otroshi, F. Kneuper, A. Schulze, and E. Tekkaya, “MECHANICALLY JOINED EXTRUSION PROFILES FOR BATTERY TRAYS,” 2022.
LibreCat: /record/36838

A. M. Schulz, C. Wecker, V. Inguva, A. S. Lopatin, and E. Y. Kenig, “A PLIC-based method for species mass transfer at free fluid interfaces,”10.1016/j.ces.2021.117357__Chemical Engineering Science, vol. 250, 2022, doi:10.1016/j.ces.2021.117357 .
LibreCat: /record/27375
DOI: 10.1016/j.ces.2021.117357

C. Wecker, A. M. Schulz, J. Heine, H. J. Bart, and E. Y. Kenig, “Droplet formation –a numerical investigation of liquid-liquid systems with consideration of Marangoni convection,”10.1016/j.ijheatmasstransfer.2021.122465__International Journal of Heat and Mass Transfer, vol. 188, 2022, doi:10.1016/j.ijheatmasstransfer.2021.122465 .
LibreCat: /record/28942
DOI: 10.1016/j.ijheatmasstransfer.2021.122465

D. Dai, E. Y. Kenig, and R. Numrich, “Experimentelle Untersuchung der Tropfenkondensation am chemisch modifizierten EdelstahlDrallrohr,”10.1002/cite.202100176__Chemie Ingenieur Technik, vol. 94, no. 6, pp. 905–911, 2022, doi:10.1002/cite.202100176 .
LibreCat: /record/44239
DOI: 10.1002/cite.202100176

V. Inguva, E. Y. Kenig, and J. B. Perot, “A front-tracking method for two-phase flow simulation with no spurious currents,” Journal of Computational Physics, vol. 456, Art. no. 1110066, 2022.
LibreCat: /record/44235

L. BAJTOSOVÁ et al., “Phase identification in twin-roll cast Al-Li alloys,”10.37904/metal.2022.4437__presented at the Metal 2022, Brno, 2022, doi:10.37904/metal.2022.4437 .
LibreCat: /record/36339
DOI: 10.37904/metal.2022.4437

O. Abdelaal, F. Hengsbach, M. Schaper, and K.-P. Hoyer, “LPBF Manufactured Functionally Graded Lattice Structures Obtained by Graded Density and Hybrid Poisson’s Ratio,”10.3390/ma15124072__Materials, vol. 15, no. 12, Art. no. 4072, 2022, doi:10.3390/ma15124072 .
LibreCat: /record/32188
DOI: 10.3390/ma15124072

D. Voswinkel et al., “Co-bonding of carbon fibre-reinforced epoxy and galvanised steel with laser structured interface for automotive applications,”10.1080/09243046.2022.2143746__Advanced Composite Materials, pp. 1–16, 2022, doi:10.1080/09243046.2022.2143746 .
LibreCat: /record/34097
DOI: 10.1080/09243046.2022.2143746

S. Pramanik, F. Tasche, K.-P. Hoyer, and M. Schaper, “Orientation-Dependent Indentation Behaviour of Additively Manufactured FeCo Sample: A Quasi In-Situ Study,”10.3390/magnetism2020007__Magnetism, vol. 2, pp. 88–104, 2022, doi:10.3390/magnetism2020007 .
LibreCat: /record/30519
DOI: 10.3390/magnetism2020007

A. Reitz, O. Grydin, and M. Schaper, “Optical Detection of Phase Transformations in Steels: An Innovative Method for Time-Efficient Material Characterization During Tailored Thermo-mechanical Processing of a Press Hardening Steel,”10.1007/s11661-022-06732-z__Metallurgical and Materials Transactions A, vol. 53, no. 8, pp. 3125–3142, 2022, doi:10.1007/s11661-022-06732-z .
LibreCat: /record/36327
DOI: 10.1007/s11661-022-06732-z

J. T. Krüger et al., “FeMn with Phases of a Degradable Ag Alloy for Residue-Free and Adapted Bioresorbability,”10.3390/jfb13040185__Journal of Functional Biomaterials, vol. 13, no. 4, p. 185, 2022, doi:10.3390/jfb13040185 .
LibreCat: /record/40154
DOI: 10.3390/jfb13040185

M. Slapáková et al., “The influence of surface on direction of diffusion in Al-Fe clad material,”10.1016/j.matchar.2022.112005__Materials Characterization, vol. 190, Art. no. 112005, 2022, doi:10.1016/j.matchar.2022.112005 .
LibreCat: /record/36328
DOI: 10.1016/j.matchar.2022.112005

H. Westermann, A. Reitz, R. Mahnken, M. Schaper, and O. Grydin, “Microstructure transformations in a press hardening steel during tailored thermomechanical processing,”10.1002/srin.202100346__steel research international, 2022, doi:10.1002/srin.202100346 .
LibreCat: /record/23794
DOI: 10.1002/srin.202100346

M. Hein et al., “Low Cycle Fatigue Performance of Additively Processed and Heat-Treated Ti-6Al-7Nb Alloy for Biomedical Applications,”10.3390/met12010122__Metals, vol. 12, no. 1, Art. no. 122, 2022, doi:10.3390/met12010122 .
LibreCat: /record/29196
DOI: 10.3390/met12010122

A. Reitz, O. Grydin, and M. Schaper, “Influence of thermomechanical processing on the microstructural and mechanical properties of steel 22Mn,”10.1016/j.msea.2022.142780__Materials Science and Engineering: A, vol. 838, Art. no. 142780, 2022, doi:10.1016/j.msea.2022.142780 .
LibreCat: /record/29811
DOI: 10.1016/j.msea.2022.142780

J. T. Krüger et al., “FeMn with Phases of a Degradable Ag Alloy for Residue-Free and Adapted Bioresorbability,”10.3390/jfb13040185__Journal of Functional Biomaterials, vol. 13, no. 4, Art. no. 185, 2022, doi:10.3390/jfb13040185 .
LibreCat: /record/33723
DOI: 10.3390/jfb13040185

P. Vieth, M.-A. Garthe, D. Voswinkel, M. Schaper, and G. Grundmeier, “Enhancement of the delamination resistance of adhesive film coated surface laser melted aluminum 7075- alloy by aminophosphonic acid adsorption,”10.1016/j.surfcoat.2022.128835__Surface and Coatings Technology, vol. 447, Art. no. 128835, 2022, doi:10.1016/j.surfcoat.2022.128835 .
LibreCat: /record/34652
DOI: 10.1016/j.surfcoat.2022.128835

W. Tillmann et al., “Tribo-functional PVD thin films deposited onto additively manufactured Ti6Al7Nb for biomedical applications,”10.1016/j.matlet.2022.132384__Materials Letters, Art. no. 132384, 2022, doi:10.1016/j.matlet.2022.132384 .
LibreCat: /record/31076
DOI: 10.1016/j.matlet.2022.132384

Z. Teng et al., “Characterization and analysis of plastic instability in an ultrafinegrained medium Mn TRIP steel,”10.1002/adem.202200022__Advanced Engineering Materials, 2022, doi:10.1002/adem.202200022 .
LibreCat: /record/31075
DOI: 10.1002/adem.202200022

J. T. Krüger, K.-P. Hoyer, A. Andreiev, M. Schaper, and C. Zinn, “Modiû01cation of Iron with Degradable Silver Phases Processed via Laser Beam Melting for Implants with Adapted Degradation Rate,”https://doi.org/10.1002/adem.202201008__Advanced Engineering Materials, Art. no. 2201008, 2022, doi:https://doi.org/10.1002/adem.202201008 .
LibreCat: /record/33498
DOI: https://doi.org/10.1002/adem.202201008

S. Pramanik, D. Milaege, K.-P. Hoyer, and M. Schaper, “Additively Manufactured Nested and Non-Nested Cellular Solids for Effective Stress Distribution and Thermal Insulation Applications: An Experimental and Finite Element Analysis Study,”10.3390/cryst12091217__Crystals, vol. 12, no. 9, Art. no. 1217, 2022, doi:10.3390/cryst12091217 .
LibreCat: /record/41497
DOI: 10.3390/cryst12091217

J. T. Krüger et al., “FeMn with Phases of a Degradable Ag Alloy for Residue-Free and Adapted Bioresorbability,”10.3390/jfb13040185__Journal of Functional Biomaterials, vol. 13, no. 4, Art. no. 185, 2022, doi:10.3390/jfb13040185 .
LibreCat: /record/41494
DOI: 10.3390/jfb13040185

O. Abdelaal, F. Hengsbach, M. Schaper, and K.-P. Hoyer, “LPBF Manufactured Functionally Graded Lattice Structures Obtained by Graded Density and Hybrid Poisson’s Ratio,”10.3390/ma15124072__Materials, vol. 15, no. 12, Art. no. 4072, 2022, doi:10.3390/ma15124072 .
LibreCat: /record/41499
DOI: 10.3390/ma15124072

A. Zibart, B. Spang, and E. Y. Kenig, “Determination of the burst pressure of pillow plates using finite element methods,”10.1016/b978-0-323-95879-0.50022-9__in Computer Aided Chemical Engineering, Toulouse, France, 2022, vol. 51, pp. 127–132, doi:10.1016/b978-0-323-95879-0.50022-9 .
LibreCat: /record/44242
DOI: 10.1016/b978-0-323-95879-0.50022-9

M. Hein et al., “On the influence of physical vapor deposited thin coatings on the low-cycle fatigue behavior of additively processed Ti-6Al-7Nb alloy,”10.1016/j.ijfatigue.2022.107235__International Journal of Fatigue, vol. 166, Art. no. 107235, 2022, doi:10.1016/j.ijfatigue.2022.107235 .
LibreCat: /record/41496
DOI: 10.1016/j.ijfatigue.2022.107235

J. T. Krüger, K.-P. Hoyer, F. Hengsbach, and M. Schaper, “Formation of insoluble silver-phases in an iron-manganese matrix for bioresorbable implants using varying laser beam melting strategies,”10.1016/j.jmrt.2022.06.006__Journal of Materials Research and Technology, vol. 19, pp. 2369–2387, 2022, doi:10.1016/j.jmrt.2022.06.006 .
LibreCat: /record/32332
DOI: 10.1016/j.jmrt.2022.06.006

J. T. Krüger, K.-P. Hoyer, F. Hengsbach, and M. Schaper, “Formation of insoluble silver-phases in an iron-manganese matrix for bioresorbable implants using varying laser beam melting strategies,”10.1016/j.jmrt.2022.06.006__Journal of Materials Research and Technology, vol. 19, pp. 2369–2387, 2022, doi:10.1016/j.jmrt.2022.06.006 .
LibreCat: /record/41498
DOI: 10.1016/j.jmrt.2022.06.006

S. Pramanik, D. Milaege, K.-P. Hoyer, and M. Schaper, “Additively manufactured novel Ti6Al7Nb circular honeycomb cellular solid for energy absorbing applications,”10.1016/j.msea.2022.143887__Materials Science and Engineering: A, vol. 854, Art. no. 143887, 2022, doi:10.1016/j.msea.2022.143887 .
LibreCat: /record/41495
DOI: 10.1016/j.msea.2022.143887

M. Hein et al., “Heat Treatments of Metastable ;2 Titanium Alloy Ti-24Nb-4Zr-8Sn Processed by Laser Powder Bed Fusion,”10.3390/ma15113774__Materials, vol. 15, no. 11, Art. no. 3774, 2022, doi:10.3390/ma15113774 .
LibreCat: /record/41500
DOI: 10.3390/ma15113774

S. Pramanik, F. Tasche, K.-P. Hoyer, and M. Schaper, “Orientation-Dependent Indentation Behaviour of Additively Manufactured FeCo Sample: A Quasi In-Situ Study,”10.3390/magnetism2020007__Magnetism, vol. 2, no. 2, pp. 88–104, 2022, doi:10.3390/magnetism2020007 .
LibreCat: /record/41503
DOI: 10.3390/magnetism2020007

W. Tillmann et al., “Tribo-functional PVD thin films deposited onto additively manufactured Ti6Al7Nb for biomedical applications,”10.1016/j.matlet.2022.132384__Materials Letters, vol. 321, Art. no. 132384, 2022, doi:10.1016/j.matlet.2022.132384 .
LibreCat: /record/41501
DOI: 10.1016/j.matlet.2022.132384

J. Huang, A. G. Orive, J. T. Krüger, K.-P. Hoyer, A. Keller, and G. Grundmeier, “Influence of proteins on the corrosion of a conventional and selective laser beam melted FeMn alloy in physiological electrolytes,”10.1016/j.corsci.2022.110186__Corrosion Science, vol. 200, p. 110186, 2022, doi:10.1016/j.corsci.2022.110186 .
LibreCat: /record/30103
DOI: 10.1016/j.corsci.2022.110186

Z. Teng et al., “Characterization and Analysis of Plastic Instability in an UltrafineGrained Medium Mn TRIP Steel,”10.1002/adem.202200022__Advanced Engineering Materials, vol. 24, no. 9, Art. no. 2200022, 2022, doi:10.1002/adem.202200022 .
LibreCat: /record/41502
DOI: 10.1002/adem.202200022

J. Huang, A. Gonzalez Orive, J. T. Krüger, K.-P. Hoyer, A. Keller, and G. Grundmeier, “Influence of proteins on the corrosion of a conventional and selective laser beam melted FeMn alloy in physiological electrolytes,”10.1016/j.corsci.2022.110186__Corrosion Science, vol. 200, Art. no. 110186, 2022, doi:10.1016/j.corsci.2022.110186 .
LibreCat: /record/41504
DOI: 10.1016/j.corsci.2022.110186

J. T. Krüger, K.-P. Hoyer, A. Andreiev, M. Schaper, and C. Zinn, “Modification of Iron with Degradable Silver Phases Processed via Laser Beam Melting for Implants with Adapted Degradation Rate,”10.1002/adem.202201008__Advanced Engineering Materials, Art. no. 2201008, 2022, doi:10.1002/adem.202201008 .
LibreCat: /record/41493
DOI: 10.1002/adem.202201008

S. Pramanik, D. Milaege, K.-P. Hoyer, and M. Schaper, “Additively manufactured novel Ti6Al7Nb circular honeycomb cellular solid for energy absorbing applications,”10.1016/j.msea.2022.143887__Materials Science and Engineering: A, vol. 854, Art. no. 143887, 2022, doi:10.1016/j.msea.2022.143887 .
LibreCat: /record/41491
DOI: 10.1016/j.msea.2022.143887

S. Pramanik, D. Milaege, K.-P. Hoyer, and M. Schaper, “Additively Manufactured Nested and Non-Nested Cellular Solids for Effective Stress Distribution and Thermal Insulation Applications: An Experimental and Finite Element Analysis Study,”10.3390/cryst12091217__Crystals, vol. 12, no. 9, Art. no. 1217, 2022, doi:10.3390/cryst12091217 .
LibreCat: /record/41489
DOI: 10.3390/cryst12091217

O. Abdelaal, F. Hengsbach, M. Schaper, and K.-P. Hoyer, “LPBF Manufactured Functionally Graded Lattice Structures Obtained by Graded Density and Hybrid Poisson’s Ratio,”10.3390/ma15124072__Materials, vol. 15, no. 12, Art. no. 4072, 2022, doi:10.3390/ma15124072 .
LibreCat: /record/41488
DOI: 10.3390/ma15124072

M. Hein et al., “On the influence of physical vapor deposited thin coatings on the low-cycle fatigue behavior of additively processed Ti-6Al-7Nb alloy,”10.1016/j.ijfatigue.2022.107235__International Journal of Fatigue, vol. 166, Art. no. 107235, 2022, doi:10.1016/j.ijfatigue.2022.107235 .
LibreCat: /record/41490
DOI: 10.1016/j.ijfatigue.2022.107235

S. Sundermeier, M. Passmann, S. aus der Wiesche, and E. Y. Kenig, “Flow in Pillow-Plate Channels for High-Speed Turbomachinery Heat Exchangers,”10.3390/ijtpp7020012__International Journal of Turbomachinery, Propulsion and Power, vol. 7, no. 2, Art. no. 12, 2022, doi:10.3390/ijtpp7020012 .
LibreCat: /record/44238
DOI: 10.3390/ijtpp7020012

E. Y. Kenig, “State-of-the-Art Modeling of Separation Columns: A Review,” Chemical Engineering Transactions, vol. 94, pp. 325–330, 2022.
LibreCat: /record/44243

I. Hami Dindar, E. Baumhögger, N. Lutters, and E. Kenig, “Wässrige Aminozuckerlösungen als neue Lösungsmittel zur CO2-Abscheidung,” presented at the Jahrestreffen der ProcessNet Fachgruppen Fluidverfahrenstechnik und Hochdruckverfahrenstechnik, Frankfurt am Main, 2022.
LibreCat: /record/31243

T. Mamedov, E. Schleicher, M. Schubert, T. Ehlert, E. Y. Kenig, and U. Hampel, “Flow Morphology of TEG Desiccant in a Structured Packing Air Dehumidifier Exposed to Floating Conditions,” presented at the The 12th International Conference Distillation &; Absorption 2022, Toulouse, France , 2022.
LibreCat: /record/33887

M. Haase and D. Zimmer, “Systematic Investigations Concerning Eddy Currents in Additively Manufactured Structures,” in Innovative Product Development by Additive Manufacturing 2021, Cham: Springer International Publishing, 2022.
LibreCat: /record/34113
DOI: 10.1007/978-3-031-05918-6_10

F. Behler, “He’d seen it in the words of Owen and Brooke’: Toward a Renaissance of Soldier Poetry in Twenty-First Century Britain,” presented at the ESSE Conference 2022, Mainz, 2022.
LibreCat: /record/44260

F. Behler, “Configuring the War-Zone: Battlefields as Markers of Glory and Catastrophe in Modern and Contemporary British Literature,” presented at the Artistic Practices of (Un-)Making Place, Innsbruck, 2022.
LibreCat: /record/44261

F. Behler, “The Iraq and Afghanistan War Memorial - A Landmark Shift in British Memory Culture,” presented at the BRITCULT 2022: British Identities Medialised, Salzburg, 2022.
LibreCat: /record/44262

F. Behler, “Inventing a New Landscape: The Literature(s) of Gardening in 18th-Century-England,” presented at the MLA Convention 2022, Washington DC, 2022.
LibreCat: /record/44258

F. Behler, “Recapturing ‘Old England’ – Nostalgia, Aristo-Anglophilia, and the Transnational Impact of ITV’s ‘Downton Abbey’,” presented at the Identity and Otherness in Film, London (Online), 2022.
LibreCat: /record/44259

M. S. Rossel and G. Meschut, “Increasing the accuracy of clinching process simulations by modeling the friction as a function of local joining process parameters,”10.1177/14644207221074290__Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, Art. no. 146442072210742, 2022, doi:10.1177/14644207221074290 .
LibreCat: /record/30736
DOI: 10.1177/14644207221074290

I. M. Kusoglu et al., “Microstructure and corrosion properties of PBF-LB produced carbide nanoparticles additivated AlSi10Mg parts,”10.1016/j.procir.2022.08.046__Procedia CIRP, vol. 111, pp. 10–13, 2022, doi:10.1016/j.procir.2022.08.046 .
LibreCat: /record/34654
DOI: 10.1016/j.procir.2022.08.046

S. Sander, G. Meschut, U. Kroll, and A. Matzenmiller, “Methodology for the systematic investigation of the hygrothermal-mechanical behavior of a structural epoxy adhesive,”10.1016/j.ijadhadh.2021.103072__International Journal of Adhesion and Adhesives, Art. no. 103072, 2022, doi:10.1016/j.ijadhadh.2021.103072 .
LibreCat: /record/28766
DOI: 10.1016/j.ijadhadh.2021.103072

C.-M. Kuball, B. Uhe, G. Meschut, and M. Merklein, “Process-adapted temperature application within a two-stage rivet forming process for high nitrogen steel,”10.1177/14644207211068693__Proceedings of the Institution of Mechanical Engineers Part L-Journal of Materials-Design and Applications, pp. 1–17, 2022, doi:10.1177/14644207211068693 .
LibreCat: /record/30847
DOI: 10.1177/14644207211068693

V. Inguva, A. Schulz, and E. Kenig, “On methods to reduce spurious currents within VOF solver frameworks. Part 1: a review of the static bubble/droplet,” Chemical Product and Process Modeling, vol. 17, pp. 121–135, 2022.
LibreCat: /record/23785

M. Wende, C. Staggenborg, and E. Y. Kenig, “Modelling and simulation of zero-gravity distillation units with metal foams,”10.1016/j.ces.2021.117097__Chemical Engineering Science, vol. 247, Art. no. 117097, 2022, doi:10.1016/j.ces.2021.117097 .
LibreCat: /record/44236
DOI: 10.1016/j.ces.2021.117097

M. Bothe, N. Lutters, and E. Y. Kenig, “Model Based and Experimental Analysis of the Dynamic Reactive Absorption Loop Behavior,” presented at the The 12th International Conference Distillation &; Absorption 2022, Toulouse, France, 2022.
LibreCat: /record/33479

E. Y. Kenig, “Modeling Concepts for Reactive Separations,” in Process Intensification by Reactive and Membrane-assisted Separations, 2nd ed., M. Skiborowski and A. Górak, Eds. Berlin, Boston: De Gruyter, 2022.
LibreCat: /record/44266
DOI: 10.1515/9783110720464

B. Uhe and G. Meschut, “Lösungsstrategien für das Halbhohlstanznieten von höchstfesten und ultrahöchstfesten Stählen mit Aluminiumwerkstoffen.” 2022.
LibreCat: /record/44265

T. Wu et al., “Experimental Analysis of Residual Stresses in CFRPs through Hole-Drilling Method: The Role of Stacking Sequence, Thickness, and Defects,”10.3390/jcs6050138__Journal of Composites Science, vol. 6, no. 5, Art. no. 138, 2022, doi:10.3390/jcs6050138 .
LibreCat: /record/31496
DOI: 10.3390/jcs6050138

C. R. Bielak, M. Böhnke, M. Bobbert, and G. Meschut, “Numerical investigation of a friction  test to determine the friction  coefficients for the clinching process,”10.1177/14644207221093468__Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, Art. no. 146442072210934, 2022, doi:10.1177/14644207221093468 .
LibreCat: /record/30962
DOI: 10.1177/14644207221093468

L. Ewenz, C. R. Bielak, M. Otroshi, M. Bobbert, G. Meschut, and M. Zimmermann, “Numerical and experimental identification of fatigue crack initiation sites in clinched joints,”10.1007/s11740-022-01124-z__Production Engineering, vol. 16, no. 2–3, pp. 305–313, 2022, doi:10.1007/s11740-022-01124-z .
LibreCat: /record/30963
DOI: 10.1007/s11740-022-01124-z

B. Schramm et al., “A Review on the Modeling of the Clinching Process Chain - Part I: Design Phase,”10.1016/j.jajp.2022.100133__Journal of Advanced Joining Processes, vol. 6, Art. no. 100133, 2022, doi:10.1016/j.jajp.2022.100133 .
LibreCat: /record/34069
DOI: 10.1016/j.jajp.2022.100133

B. Schramm et al., “A Review on the Modeling of the Clinching Process Chain - Part II: Joining Process,”10.1016/j.jajp.2022.100134__Journal of Advanced Joining Processes, Art. no. 100134, 2022, doi:10.1016/j.jajp.2022.100134 .
LibreCat: /record/34068
DOI: 10.1016/j.jajp.2022.100134

T. Wu et al., “Characterization of residual stresses in fiber metal laminate interfaces - A combined approach applying hole-drilling method and energy-dispersive X-ray diffraction,”10.1016/j.compstruct.2022.116071__Composite Structures, Art. no. 116071, 2022, doi:10.1016/j.compstruct.2022.116071 .
LibreCat: /record/32814
DOI: 10.1016/j.compstruct.2022.116071

M. Wende and E. Y. Kenig, “Modeling of a hybrid process combining zero-gravity distillation and vapor permeation,” 2022.
LibreCat: /record/44267

S. Martin, C. R. Bielak, M. Bobbert, T. Tröster, and G. Meschut, “Numerical investigation of the clinched joint loadings considering the initial pre-strain in the joining area,”10.1007/s11740-021-01103-w__Production Engineering, 2022, doi:10.1007/s11740-021-01103-w .
LibreCat: /record/29951
DOI: 10.1007/s11740-021-01103-w

K. Tittmann, I. Koch, S. Çavdar, M. Gude, and G. Meschut, “Service strength analysis method for adhesively bonded hybrid structures under multiaxial loading,” in Proceedings of the 20th European Conference on Composite Materials, Lausanne, 2022, vol. 2, pp. 730–739.
LibreCat: /record/44269

S. Martin, K. Kurtusic, and T. Tröster, “Influence of the Surrounding Sheet Geometry on a Clinched Joint,”Â  https://doi.org/10.4028/p-09md1c__Key Engineering Materials, vol. 927, 2022, doi:Â  https://doi.org/10.4028/p-09md1c .
LibreCat: /record/32813
DOI:   https://doi.org/10.4028/p-09md1c

R. Bertling, M. Hack, I. Ausner, B. Horschitz, S. A. Bernemann, and E. Kenig, “Modelling film and rivulet flows on microstructured surfaces using CFD methods,”10.1016/j.ces.2021.117414__Chemical Engineering Science, vol. 251, Art. no. 117414, 2022, doi:10.1016/j.ces.2021.117414 .
LibreCat: /record/30591
DOI: 10.1016/j.ces.2021.117414

R. Bertling, M. Hack, I. Ausner, B. Horschitz, S. Bernemann, and E. Y. Kenig, “Modelling film and rivulet flows on microstructured surfaces using CFD methods,”10.1016/j.ces.2021.117414__Chemical Engineering Science, vol. 251, Art. no. 117414, 2022, doi:10.1016/j.ces.2021.117414 .
LibreCat: /record/30382
DOI: 10.1016/j.ces.2021.117414

F. Brüning and V. Schöppner, “Numerical Simulation of Solids Conveying in Grooved Feed Sections of Single Screw Extruders,”https://doi.org/10.3390/polym14020256__Polymers 14, 2022, doi:https://doi.org/10.3390/polym14020256 .
LibreCat: /record/29948
DOI: https://doi.org/10.3390/polym14020256

V. Schöppner, K. Gevers, A. Tornede, M. Wever, and E. Hüllermeier, “A comparison of heuristic, statistical, and machine learning methods for heated tool butt welding of two different materials,” Welding in the World, p. 14, 2022.
LibreCat: /record/34708

E. Moritzer, C. Held, and J. Hillemeyer, “Material-specific prediction of the optimal joinig parameters for the screw blind rivet joining process,” Welding in the World, 2022.
LibreCat: /record/34739

J. Rozo Vasquez et al., “Coupled microscopic and micromagnetic depth-specific analysis of plastic deformation and phase transformation of metastable austenitic steel AISI 304L by flow forming,”10.1515/pm-2022-0064__Practical Metallography, vol. 59, no. 11, pp. 660–675, 2022, doi:10.1515/pm-2022-0064 .
LibreCat: /record/34000
DOI: 10.1515/pm-2022-0064

L. Kersting, B. Arian, J. R. Vasquez, A. Trächtler, W. Homberg, and F. Walther, “Innovative Online Measurement and Modelling Approach for Property-Controlled Flow Forming Processes,”10.4028/p-yp2hj3__Key Engineering Materials, vol. 926, pp. 862–874, 2022, doi:10.4028/p-yp2hj3 .
LibreCat: /record/33999
DOI: 10.4028/p-yp2hj3

J. Rozo Vasquez, F. Walther, B. Arian, W. Homberg, L. Kersting, and A. Trächtler, “Soft sensor concept for micromagnetic depth-specific analysis of phase transformation during flow forming of AISI 304L steel.,” presented at the ICBM 14, 14th International Conference on Barkhausen Noise and Micromagnetic Testing, Stockholm, 2022.
LibreCat: /record/36563

L. Kersting, A. Trächtler, B. Arian, W. Homberg, J. Rozo Vasquez, and F. Walther, Echtzeitfähige Modellierung eines innovativen Drückwalzprozesses für die eigenschaftsgeregelte Herstellung gradierter Bauteile. Magdeburg: Diedrich, 2022.
LibreCat: /record/36412

M. Hein, “Influence of Physical Vapor Deposition on High-Cycle Fatigue Performance of Additively Manufactured Ti-6Al-7Nb Alloy,”10.3390/cryst12091190__Crystals, 2022, doi:10.3390/cryst12091190 .
LibreCat: /record/33338
DOI: 10.3390/cryst12091190

O. Schön, R.-S. Götte, and J. Timmermann, “Multi-Objective Physics-Guided Recurrent Neural Networks for Identifying Non-Autonomous Dynamical Systems,”https://doi.org/10.1016/j.ifacol.2022.07.282__in 14th IFAC Workshop on Adaptive and Learning Control Systems (ALCOS 2022), Casablanca, Morocco, 2022, vol. 55, no. 12, pp. 19–24, doi:https://doi.org/10.1016/j.ifacol.2022.07.282 .
LibreCat: /record/31066
DOI: https://doi.org/10.1016/j.ifacol.2022.07.282

T. Stallmeister and T. Tröster, “In-Mold-Assembly of Hybrid Bending Structures by Compression Molding,”10.4028/p-5fxp53__Key Engineering Materials, vol. 926, pp. 1457–1467, 2022, doi:10.4028/p-5fxp53 .
LibreCat: /record/32869
DOI: 10.4028/p-5fxp53

J. Finke, I. Horwath, T. Matzner, and C. Schulz, “(De)Coding Social Practice in the Field of XAI: Towards a Co-constructive Framework of Explanations and Understanding Between Lay Users and Algorithmic Systems,”10.1007/978-3-031-05643-7_10__in Artificial Intelligence in HCI, 2022, pp. 149–160, doi:10.1007/978-3-031-05643-7_10 .
LibreCat: /record/39639
DOI: 10.1007/978-3-031-05643-7_10

I. Horwath, “Algorithmen, KI und soziale Diskriminierung,” in Inter- und multidisziplinäre Perspektiven der Geschlechterforschung, 1st ed., vol. 4, K. Schnegg, J. Tschuggnall, C. Voithofer , and M. Auer , Eds. Innsbruck: innsbruck university press, 2022, pp. 71–101.
LibreCat: /record/39638

I. Horwath, M. Kastein, and J. Finke, “Waschen, Warten, Wege ebnen. Ambivalente Fürsorge und der männliche Heldenmythos in der Feuerwehr,” in Care-Arbeit und Gender in der digitalen Transformation, 1st ed., M. Kastein and L. Weber, Eds. Weinheim: Juventa Verlag, 2022, pp. 119–134.
LibreCat: /record/39637

H. Hanses and I. Horwath, “OPERATIONAL AND DEMAND-ORIENTED FIREFIGHTING EQUIPMENT ,” in Conference proceedings 38th Danubia Adria Symposium on Advances in Experimental Mechanics, Poros, 2022.
LibreCat: /record/33803

M. Triebus, M. Ostermann, T. Tröster, and I. Horwath, “Advanced Automotive Components by Fiber-Metal-Laminates,” presented at the Materials in Car Body Engineering 2022, Bad Nauheim, 2022.
LibreCat: /record/32871

G. Tonbul et al., “Development of Battery System Based on Na-S and Characterization Using X-ray Absorption Spectroscopy,” presented at the Electrochem2022 &; 63rd Corrosion Science Symposium, Edinburgh, 2022.
LibreCat: /record/44376

I. Gräßler, C. Oleff, and D. Preuß, “Proactive Management of Requirement Changes in the Development of Complex Technical Systems,”10.3390/app12041874__Applied Sciences, vol. 12, no. 4, Art. no. 1874, 2022, doi:10.3390/app12041874 .
LibreCat: /record/30213
DOI: 10.3390/app12041874

J. Eckel, “Animation und Mimesis. Zur digitalen Expansion bewegtbildlicher Mimesis und aanimimetischem8 Denken,” in Mimesis Expanded. Die Ausweitung der mimetischen Zone, F. Balke and E. Linseisen, Eds. Paderborn: Fink, 2022, pp. 2673294.
LibreCat: /record/44462

S. H. Klippstein, F. Heiny, N. Pashikanti, M. Gessler, and H.-J. Schmid, “Powder Spread Process Monitoring in Polymer Laser Sintering and its Influences on Part Properties,”https://doi.org/10.1007/s11837-021-05042-w __JOM - The Journal of The Minerals, Metals &; Materials Society (TMS), vol. 74, pp. 1149–1157, 2022, doi:https://doi.org/10.1007/s11837-021-05042-w  .
LibreCat: /record/30228
DOI: https://doi.org/10.1007/s11837-021-05042-w 

S. H. Klippstein and H.-J. Schmid, “Powder Spread Flaws in Polymer Laser Sintering and its Influences on Mechanical Performance,” 2022.
LibreCat: /record/33356

S. Schmidt, M. Gräßer, and H.-J. Schmid, “A Shape Newton Scheme for Deforming Shells with Application to Capillary Bridges,”10.1137/20m1389054__SIAM Journal on Scientific Computing, vol. 44, no. 4, pp. 75–94, 2022, doi:10.1137/20m1389054 .
LibreCat: /record/44468
DOI: 10.1137/20m1389054

D. Menge and H.-J. Schmid, “Low Temperature Laser Sintering with P and P on a Standard System,”10.1002/masy.202100397__Macromolecular Symposia, vol. 404, no. 1, Art. no. 2100397, 2022, doi:10.1002/masy.202100397 .
LibreCat: /record/44469
DOI: 10.1002/masy.202100397

T. Scheveleva et al., “Creation of a Knowledge Space by Semantically Linking Data Repository and Knowledge Management System - a Use Case from Production Engineering,”10.1016/j.ifacol.2022.10.006__2022, doi:10.1016/j.ifacol.2022.10.006 .
LibreCat: /record/44514
DOI: 10.1016/j.ifacol.2022.10.006

I. Mozgova et al., “Knowledge Annotation within Research Data Management System for Oxygen-Free Production Technologies,”10.1017/pds.2022.54__2022, doi:10.1017/pds.2022.54 .
LibreCat: /record/44510
DOI: 10.1017/pds.2022.54

J. Schneider, W. Scheidel, J. Wurst, I. Mozgova, and R. Lachmayer, “Comparative Evaluation of Product and Service Solutions in the Context of Product-Service Systems and Technical Inheritance,”https://doi.org/10.1007/978-3-030-94335-6_23__2022, doi:https://doi.org/10.1007/978-3-030-94335-6_23 .
LibreCat: /record/44513
DOI: https://doi.org/10.1007/978-3-030-94335-6_23

K. Herrmann, B. Bode, J. Wurst, P. Gembarski, I. Mozgova, and R. Lachmayer, “Quantification of the material-related environmental impact of topology-optimized multi-material components,”10.35199/dfx2022.01__2022, doi:10.35199/dfx2022.01 .
LibreCat: /record/44515
DOI: 10.35199/dfx2022.01