V. Schöppner and J. Köllermeier, “Application of a Dynamic Approach to Determine the Optimal Barrel Temperature of Single Screw Extruders,” presented at the 37th International Conference of the Polymer Processing Society (PPS), Fukuoka, 2022.
LibreCat: /record/34720

V. Schöppner and J. Köllermeier, “Development of an Inline-Measurement System of the Surface Temperature of Square Hollow Profiles,” presented at the Annual Conference of the Society of Plastics Engineers (ANTEC 2022), Charlotte, 2022.
LibreCat: /record/34726

M. CIESLAR et al., “HOMOGENIZATION OF TWIN-ROLL CAST Al-Li-BASED ALLOY STUDIED BY IN-SITU ELECTRON MICROSCOPY,”10.37904/metal.2022.4438__presented at the Metal 2022, Brno, 2022, doi:10.37904/metal.2022.4438 .
LibreCat: /record/36335
DOI: 10.37904/metal.2022.4438

R. E. Hagengruber, “Du Châtelet and Kant: Claiming the Renewal of Philosophy,” in Époque Émilienne, Cham: Springer International Publishing, 2022.
LibreCat: /record/34705
DOI: 10.1007/978-3-030-89921-9_3

R. E. Hagengruber, Ed., Époque Émilienne. Cham: Springer International Publishing, 2022.
LibreCat: /record/34702
DOI: 10.1007/978-3-030-89921-9

Y. Gao et al., “Tilting nondispersive bands in an empty microcavity,”10.1063/5.0093908__Applied Physics Letters, vol. 121, no. 20, Art. no. 201103, 2022, doi:10.1063/5.0093908 .
LibreCat: /record/36414
DOI: 10.1063/5.0093908

T. Berger and D. Dennstädt, “Funnel PMC with feasibility constraints for nonlinear systems with arbitrary relative degree,” IEEE Control  Systems Letters, vol. 6, pp. 2804–2809, 2022.
LibreCat: /record/35998

T. Berger, “Feedback control of the COVID-19 pandemic with guaranteed non-exceeding ICU capacity,” Systems &; Control Letters, vol. 160, Art. no. 105111, 2022.
LibreCat: /record/36005

J. Jaiswal, T. Berger, and N. K. Tomar, “Partial impulse observability of linear descriptor systems,” Systems &; Control Letters, vol. 168, Art. no. 105352, 2022.
LibreCat: /record/35993

T. Berger, M. Puche, and F. L. Schwenninger, “Funnel control for a moving water tank,” Automatica, vol. 135, Art. no. 109999, 2022.
LibreCat: /record/36028

T. Berger and F. Haller, “On an extension of a global implicit function theorem,” Comptes Rendus Mathématique, vol. 360, pp. 439–450, 2022.
LibreCat: /record/36022

D. Krimphove, “Der Fall Coca Cola - ‘Arbeitsverweigerung’ des EuGH?,” ArbR- Arbeitsrecht Aktuell, no. 15, p. 363 ff., 2022.
LibreCat: /record/36219

T. Schapeler and T. Bartley, “Information extraction in photon-counting experiments,”10.1103/physreva.106.013701__Physical Review A, vol. 106, no. 1, Art. no. 013701, 2022, doi:10.1103/physreva.106.013701 .
LibreCat: /record/33670
DOI: 10.1103/physreva.106.013701

M. Protte, V. B. Verma, J. P. Höpker, R. P. Mirin, S. Woo Nam, and T. Bartley, “Laser-lithographically written micron-wide superconducting nanowire single-photon detectors,”10.1088/1361-6668/ac5338__Superconductor Science and Technology, vol. 35, no. 5, Art. no. 055005, 2022, doi:10.1088/1361-6668/ac5338 .
LibreCat: /record/33671
DOI: 10.1088/1361-6668/ac5338

N. A. Lange et al., “Cryogenic integrated spontaneous parametric down-conversion,”10.1364/optica.445576__Optica, vol. 9, no. 1, Art. no. 108, 2022, doi:10.1364/optica.445576 .
LibreCat: /record/30342
DOI: 10.1364/optica.445576

R. Becker, M. Lauert, J. Fischer, H. Kirchhoff, A. Kornbach, and K. Januschewski, Tagungsbericht: Unverfügbarkeit – Widmung – Latenz: Das Heilige in der Kultur. Interdisziplinäre Tagung vom 16. bis 18. November 2021 an der Universität Paderborn. 2022.
LibreCat: /record/36413

R. Stephan and A. Brosius, “Experimental Measurement Method and Evaluation of an Analytical Approach for Sound Conduction through Multiple Clinched Sheets,”10.3390/engproc2022026025__2022, doi:10.3390/engproc2022026025 .
LibreCat: /record/36462
DOI: 10.3390/engproc2022026025

C. R. Bielak, M. Böhnke, M. Bobbert, and G. Meschut, “Experimental and Numerical Investigation on Manufacturing-Induced Pre-Strain on the Load-Bearing Capacity of Clinched Joints,”10.4028/p-5d009y__Key Engineering Materials, vol. 926, pp. 1516–1526, 2022, doi:10.4028/p-5d009y .
LibreCat: /record/32413
DOI: 10.4028/p-5d009y

D. Römisch and M. Merklein, “Experimental and Numerical Analysis of Cold Formed Multi Pin Structures Using a Multi-Acting Tool Design,” presented at the 12th Tooling Conference and Exhibition, Örebro, 2022.
LibreCat: /record/36468

S. Wituschek and M. Lechner, “Versatile tool design for a tumbling self-piercing riveting process,” presented at the Tooling 2022 , 2022.
LibreCat: /record/36470

M. Busch, D. Köhler, T. Hausotte, R. Kupfer, J. Troschitz, and M. Gude, “Approach to Determine the Characteristic Dimensions of Clinched Joints by Industrial X-ray Computed Tomography,” presented at the 4 th Singapore International Non-destructive Testing Conference and Exhibition (SIN), 2022.
LibreCat: /record/36473

F. Thiele et al., “Cryogenic electro-optic modulation in titanium in-diffused lithium niobate waveguides,”10.1088/2515-7647/ac6c63__Journal of Physics: Photonics, vol. 4, no. 3, Art. no. 034004, 2022, doi:10.1088/2515-7647/ac6c63 .
LibreCat: /record/33672
DOI: 10.1088/2515-7647/ac6c63

F. Thiele, T. Hummel, M. Protte, and T. Bartley, “Opto-electronic bias of a superconducting nanowire single photon detector using a cryogenic photodiode,”10.1063/5.0097506__APL Photonics, vol. 7, no. 8, Art. no. 081303, 2022, doi:10.1063/5.0097506 .
LibreCat: /record/33673
DOI: 10.1063/5.0097506

I. Steinhardt and F. Kruschick, “Knowledge Equity and Open Science in qualitative research – Practical research considerations,”10.3897/rio.8.e86387__Research Ideas and Outcomes, vol. 8, p. e86387, 2022, doi:10.3897/rio.8.e86387 .
LibreCat: /record/36524
DOI: 10.3897/rio.8.e86387

J. Hiebl, I. Steinhardt, and M. Bigos, “Die (Un-)Sichtbarkeit von (offenen) Bildungsmaterialien in der Soziologie,”10.3278/HSL2227W__die hochschule, no. 8, pp. 379–394, 2022, doi:10.3278/HSL2227W .
LibreCat: /record/36538
DOI: 10.3278/HSL2227W

D. Ternes et al., “Dem eigenen Anspruch auf der Spur,” in Hochschulen in der Pandemie. Impulse für eine nachhaltige Entwicklung von Studium und Lehre, H. Angenent, J. Petri, and T. Zimenkova, Eds. Bielefeld: transkript, 2022, pp. 400–414.
LibreCat: /record/36526
DOI: 10.5445/IR/1000145819 

J. Eckel and E. Linseisen, “Editorial: Anschaulichkeit – Wissen. Macht. Alternativen.,” Rabbit Eye – Zeitschrift für Filmforschung, no. 012, 2022.
LibreCat: /record/36843

J. Eckel and E. Linseisen, Eds., Rabbit Eye: Anschaulichkeit, no. 012. 2022.
LibreCat: /record/36841

J. Su, A. González Orive, and G. Grundmeier, “Nano-FTIR and chemical force analysis of electrografted aryldiazonium salts on ODT-microcontact printed Au-surfaces,”10.1016/j.apsusc.2022.155355__Applied Surface Science, vol. 609, Art. no. 155355, 2022, doi:10.1016/j.apsusc.2022.155355 .
LibreCat: /record/36874
DOI: 10.1016/j.apsusc.2022.155355

K. Bobzin, C. Kalscheuer, G. Grundmeier, T. de los Arcos, S. Kollmann, and M. Carlet, “Oxidation stability of chromium aluminum oxynitride hard coatings,”10.1016/j.surfcoat.2022.128927__Surface and Coatings Technology, vol. 449, Art. no. 128927, 2022, doi:10.1016/j.surfcoat.2022.128927 .
LibreCat: /record/36872
DOI: 10.1016/j.surfcoat.2022.128927

V. Neßlinger, S. Welzel, F. Rieker, D. Meinderink, U. Nieken, and G. Grundmeier, “Thin OrganicInorganic AntiFouling HybridFilms for Microreactor Components,”10.1002/mren.202200043__Macromolecular Reaction Engineering, Art. no. 2200043, 2022, doi:10.1002/mren.202200043 .
LibreCat: /record/36873
DOI: 10.1002/mren.202200043

L. Butzhammer, A. M. Müller, and T. Hausotte, “Calibration of 3D scan trajectories for an industrial computed tomography setup with 6-DOF object manipulator system using a single sphere,”10.1088/1361-6501/ac9856__Measurement Science and Technology, vol. 34, no. 1, Art. no. 015403, 2022, doi:10.1088/1361-6501/ac9856 .
LibreCat: /record/34264
DOI: 10.1088/1361-6501/ac9856

T. Henksmeier et al., “Remote epitaxy of In(x)Ga(1-x)As(001) on graphene covered GaAs(001) substrates,”10.1016/j.jcrysgro.2022.126756__Journal of Crystal Growth, vol. 593, Art. no. 126756, 2022, doi:10.1016/j.jcrysgro.2022.126756 .
LibreCat: /record/36804
DOI: 10.1016/j.jcrysgro.2022.126756

V. Churavy et al., “Bridging HPC Communities through the Julia Programming Language.” 2022.
LibreCat: /record/36879

B. Bonnard, J. Rouot, and B. E. Wembe Moafo, “Accessibility properties of abnormal geodesics in optimal control illustrated by two case studies,”10.3934/mcrf.2022052__Mathematical Control and Related Fields, vol. 0, no. 0, pp. 0–0, 2022, doi:10.3934/mcrf.2022052 .
LibreCat: /record/35206
DOI: 10.3934/mcrf.2022052

B. Bonnard, O. Cots, J. Gergaud, and B. E. Wembe Moafo, “Abnormal geodesics in 2D-Zermelo navigation problems in the case of revolution and the fan shape of the small time balls,”10.1016/j.sysconle.2022.105140__Systems &;amp; Control Letters, vol. 161, Art. no. 105140, 2022, doi:10.1016/j.sysconle.2022.105140 .
LibreCat: /record/33869
DOI: 10.1016/j.sysconle.2022.105140

D. Büchel, A. Visser, T. Lehmann, and J. Baumeister, “Frontal theta power increases during table tennis play – indications for neurophysiological demands during open-skill sports?,” presented at the 4th International Mobile Brain/Body Imaging Conference, La Jolla, 2022.
LibreCat: /record/36938

T. Lehmann, A. Visser, T. Havers, D. Büchel, and J. Baumeister, “Surface Instability Modulates Cortical Information Processing In Multi-Joint Compound Movements,”10.1249/01.mss.0000882152.12078.64__San Diego, 2022, vol. 54, no. 9S, pp. 565–565, doi:10.1249/01.mss.0000882152.12078.64 .
LibreCat: /record/36937
DOI: 10.1249/01.mss.0000882152.12078.64

I. Constantiou, A. Mukkamala, M. Sjöklint, and M. Trier, “Engaging with self-tracking applications: how do users respond to their performance data?,”10.1080/0960085x.2022.2081096__European Journal of Information Systems, pp. 1–21, 2022, doi:10.1080/0960085x.2022.2081096 .
LibreCat: /record/36961
DOI: 10.1080/0960085x.2022.2081096

M. Neukötter, S. Jesinghausen, and H.-J. Schmid, “Model droplet formation in extensional filament stretching within a Filament Extension Atomizer,”10.1007/s00397-022-01339-y__Rheologica Acta, 2022, doi:10.1007/s00397-022-01339-y .
LibreCat: /record/31035
DOI: 10.1007/s00397-022-01339-y

S. Thomas, “Language in the Age of Mechanical Reproduction,”10.48417/technolang.2022.04.07__Technology and Language , vol. 3, no. 4, 2022, doi:10.48417/technolang.2022.04.07 .
LibreCat: /record/36988
DOI: 10.48417/technolang.2022.04.07

S. Shaqiri, D. Kaczmarek, F. vom Lehn, J. Beeckmann, H. Pitsch, and T. Kasper, “Experimental Investigation of the Pressure Dependence of Iso-Octane Combustion,”10.3389/fenrg.2022.859112__Frontiers in Energy Research, vol. 10, 2022, doi:10.3389/fenrg.2022.859112 .
LibreCat: /record/36815
DOI: 10.3389/fenrg.2022.859112

M. Hoener and T. Kasper, “Nitrous acid in high-pressure oxidation of C doped with nitric oxide: Challenges in the isomer-selective detection and quantification of an elusive intermediate,”10.1016/j.combustflame.2022.112096__Combustion and Flame, vol. 243, Art. no. 112096, 2022, doi:10.1016/j.combustflame.2022.112096 .
LibreCat: /record/36817
DOI: 10.1016/j.combustflame.2022.112096

D. A. Knyazkov, A. V. Cherepanov, V. G. Kiselev, I. E. Gerasimov, T. Kasper, and A. G. Shmakov, “Experimental and kinetic modeling study of the positive ions in premixed ethylene flames over a range of equivalence ratios,”10.1016/j.proci.2022.07.157__Proceedings of the Combustion Institute, 2022, doi:10.1016/j.proci.2022.07.157 .
LibreCat: /record/36810
DOI: 10.1016/j.proci.2022.07.157

F. Beule, D. Teutenberg, and G. Meschut, “Directional dependence of the mechanical properties of structural adhesive joints with curing-induced pre-deformations,”10.1177/09544070221100130__Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, Art. no. 095440702211001, 2022, doi:10.1177/09544070221100130 .
LibreCat: /record/31330
DOI: 10.1177/09544070221100130

D. Kaczmarek et al., “Activation effect of ozone and DME on the partial oxidation of natural gas surrogates and validation of pressure-dependent ozone decomposition,”10.1016/j.jaecs.2022.100107__Applications in Energy and Combustion Science, Art. no. 100107, 2022, doi:10.1016/j.jaecs.2022.100107 .
LibreCat: /record/36814
DOI: 10.1016/j.jaecs.2022.100107

D. Kaczmarek, C. Rudolph, B. Atakan, and T. Kasper, “Kinetic investigation of the ozone-assisted partial oxidation of fuel-rich natural gas mixtures at elevated pressure,”10.1016/j.proci.2022.07.195__Proceedings of the Combustion Institute, 2022, doi:10.1016/j.proci.2022.07.195 .
LibreCat: /record/36811
DOI: 10.1016/j.proci.2022.07.195

T. Bierkandt et al., “A combustion chemistry study of tetramethylethylene in a laminar premixed low-pressure hydrogen flame,”10.1016/j.proci.2022.07.205__Proceedings of the Combustion Institute, 2022, doi:10.1016/j.proci.2022.07.205 .
LibreCat: /record/36813
DOI: 10.1016/j.proci.2022.07.205

M. Böhnke, E. Unruh, S. Sell, M. Bobbert, D. Hein, and G. Meschut, “Functionality Study of an Optical Measurement Concept for Local Force Signal Determination in High Strain Rate Tensile Tests,”10.4028/p-wpuzyw__Key Engineering Materials, vol. 926, pp. 1564–1572, 2022, doi:10.4028/p-wpuzyw .
LibreCat: /record/33002
DOI: 10.4028/p-wpuzyw

M. Böhnke, C. R. Bielak, M. Bobbert, and G. Meschut, “Development of a Modified Punch Test for Investigating the Failure Behavior in Sheet Metal Materials,” in The Minerals, Metals &;amp; Materials Series, Cham: Springer International Publishing, 2022.
LibreCat: /record/33003
DOI: 10.1007/978-3-031-06212-4_52