Gräßler, Iris, Daniel Preuß, Lukas Brandt, and Michael Mohr. “Efficient Extraction of Technical Requirements Applying Data Augmentation.” In Proceedings of 8th IEEE International Symposium on Systems Engineering 2022. Wien, 2022.

Gräßler, Iris, Michael Hieb, and Daniel Roesmann. “Gestaltung Einer Forschungsinfrastruktur Für Die Anwendung Digitaler Werkzeuge in Cyber-Physischen Produktionssystemen.”https://doi.org/10.51202/9783181023990-667__In Automation 2022. VDI Verlag, 2022.https://doi.org/10.51202/9783181023990-667 .

Dahms, Frederik, and Werner Homberg. “Manufacture of Defined Residual Stress Distributions in the Friction-Spinning Process: Driven Tool and Subsequent Flow-Forming.”https://doi.org/10.4028/p-3rk19y__Key Engineering Materials 926 (2022): 683–89.https://doi.org/10.4028/p-3rk19y .

Dahms, Frederik, and Werner Homberg. “Manufacture of Defined Residual Stress Distributions in the Friction-Spinning Process: Investigations and Run-to-Run Predictive Control.”https://doi.org/10.3390/met12010158__Metals 12, no. 1 (2022).https://doi.org/10.3390/met12010158 .

Schramm, Britta, and Deborah Weiß. “Fracture Mechanical Evaluation of the Material HX.”https://doi.org/10.1515/mt-2022-0191__Materials Testing 64, no. 10 (2022): 1437–49.https://doi.org/10.1515/mt-2022-0191 .

Paul, Andreas, Elmar Baumhögger, Andreas Elsner, Michael Reineke, Christian Hueppe, Rainer Stamminger, Heike Hoelscher, et al. “Impact of Aging on the Energy Efficiency of Household Refrigerating Appliances.”https://doi.org/10.1016/j.applthermaleng.2021.117992__Applied Thermal Engineering 205 (2022).https://doi.org/10.1016/j.applthermaleng.2021.117992 .

Javed, Muhammad Ali, Sebastian Vater, Elmar Baumhögger, Thorsten Windmann, and Jadran Vrabec. “Apparatus for the Measurement of the Thermodynamic Speed of Sound of Diethylene Glycol and Triethylene Glycol.”https://doi.org/10.1016/j.jct.2022.106766__The Journal of Chemical Thermodynamics, 2022.https://doi.org/10.1016/j.jct.2022.106766 .

Khider Abbas Abbas, Wameedh, Elmar Baumhögger, and Jadran Vrabec. “Experimental Investigation of Organic Rankine Cycle Performance Using Alkanes or Hexamethyldisiloxane as a Working Fluid.”https://doi.org/10.1016/j.ecmx.2022.100244__Energy Conversion and Management: X, 2022.https://doi.org/10.1016/j.ecmx.2022.100244 .

Betken, Benjamin, Robin Beckmüller, Muhammad Ali Javed, Elmar Baumhögger, Roland Span, Jadran Vrabec, and Monika Thol. “Thermodynamic Properties for 1-Hexene – Measurements and Modeling.”https://doi.org/10.1016/j.jct.2022.106881__The Journal of Chemical Thermodynamics, 2022.https://doi.org/10.1016/j.jct.2022.106881 .

Bielak, Christian Roman, Max Böhnke, Mathias Bobbert, and Gerson Meschut. “Development of a Numerical 3D Model for Analyzing Clinched Joints in Versatile Process Chains.”https://doi.org/10.1007/978-3-031-06212-4_15__In The Minerals, Metals &;amp; Materials Series. Cham: Springer International Publishing, 2022.https://doi.org/10.1007/978-3-031-06212-4_15 .

Jende, Yvonne Kristin. “Out of the Box and into the Gutter. Rethinking Space in Michael Nicoll Yahgulanaas’ Haida Manga Art.” In Artistic Practices of (Un-)Making Place, International and Interdisciplinary Conference. University of Innsbruck, 2022.

Blumenthal, Lars Martin, and Detmar Zimmer. “Multidomänensimulation des Schaltverhaltens von Federkraftbremsen.”https://doi.org/10.37544/0720-5953-2022-11-12-78__Konstruktion 74, no. 11–12 (2022): 78–86.https://doi.org/10.37544/0720-5953-2022-11-12-78 .

Ehlert, Meik, Christian Henke, and Ansgar Trächtler. “Analysis of Differential Algebraic Equation Systems for Connecting Energy Storages of Generally Valid Functional Mock-up Units.”https://doi.org/10.5220/0011305700003274__In Proceedings of the 12th International Conference on Simulation and Modeling Methodologies, Technologies and Applications. SCITEPRESS - Science and Technology Publications, 2022.https://doi.org/10.5220/0011305700003274 .

Bathelt, Lukas, Fabian Bader, Eugen Djakow, Christian Henke, Ansgar Trächtler, and Werner Homberg. “Innovative Assistance System for Setting up a Mechatronic Straightening Machine,”https://doi.org/10.4028/p-vs07w9__2022.https://doi.org/10.4028/p-vs07w9 .

Bader, Fabian, Lukas Bathelt, Eugen Djakow, Christian Henke, Werner Homberg, and Ansgar Trächtler. “An Approach for an Innovative 3d Steel Strip Straightening Machine for Curvature and Saber Compensation,”https://doi.org/10.4028/p-87wvu0__2022.https://doi.org/10.4028/p-87wvu0 .

Koppert, Steven, Christian Henke, Ansgar Trächtler, and Stefan Möhringer. “Tool Wear Monitoring of a Tree Log Bandsaw Using a Deep Convolutional Neural Network on Challenging Data.”https://doi.org/10.1016/j.ifacol.2022.04.252__IFAC-PapersOnLine 55, no. 2 (2022): 554–60.https://doi.org/10.1016/j.ifacol.2022.04.252 .

Brosch, Anian, Johann Rauhaus, Oliver Wallscheid, Joachim Böcker, and Detmar Zimmer. “Data-Driven Adaptive Torque Oscillation Compensation for Multi-Motor Drive Systems.”https://doi.org/10.1109/ojia.2022.3171333__IEEE Open Journal of Industry Applications, 2022.https://doi.org/10.1109/ojia.2022.3171333 .

Bathelt, Lukas, Fabian Bader, Eugen Djakow, Christian Henke, Ansgar Trächtler, and Werner Homberg. “Mechatronische Richtapparate: Intelligente Richttechnik von Hochfesten Flachdrähten.” In Fachtagung VDI MECHATRONIK 2022 , 19–24. Darmstadt, 2022.

Malena, Kevin, Christopher Link, Leon Bußemas, Sandra Gausemeier, and Ansgar Trächtler. “Traffic Estimation and MPC-Based Traffic Light System Control in Realistic Real-Time Traffic Environments.”https://doi.org/10.1007/978-3-031-17098-0_12__In Communications in Computer and Information Science, edited by Cornel Klein, Mathias Jarke, Markus Helfert, Karsten Berns, and Oleg Gusikhin, 1612:232–254. Communications in Computer and Information Science. Cham: Springer International Publishing, 2022.https://doi.org/10.1007/978-3-031-17098-0_12 .

Junker, Annika, Julia Timmermann, and Ansgar Trächtler. “Data-Driven Models for Control Engineering Applications Using the Koopman Operator.”https://doi.org/10.1109/AIRC56195.2022.9836980__In 2022 3rd International Conference on Artificial Intelligence, Robotics and Control (AIRC 2022), 1–9, n.d.https://doi.org/10.1109/AIRC56195.2022.9836980 .

Götte, Ricarda-Samantha, and Julia Timmermann. “Composed Physics- and Data-Driven System Identification for Non-Autonomous Systems in Control Engineering.”https://doi.org/10.1109/AIRC56195.2022.9836982__In 2022 3rd International Conference on Artificial Intelligence, Robotics and Control (AIRC), 67–76, 2022.https://doi.org/10.1109/AIRC56195.2022.9836982 .

Schütz, Stefan, Robin Schmidt, Christian Henke, and Ansgar Trächtler. “Virtual Commissioning of the Trajectory Tracking Control of a Sensor-Guided, Kinematically Redundant Robotic Welding System on a PLC.”https://doi.org/10.1109/syscon53536.2022.9773878__In 2022 IEEE International Systems Conference (SysCon), 1–8. IEEE, 2022.https://doi.org/10.1109/syscon53536.2022.9773878 .

Lenz, Cederic , Fabian Hanke, Christian Henke, and Ansgar Trächtler. “Anomaly Detection in Hot Forming Processes Using Hybrid Modeling - Part II.”https://doi.org/10.1109/ETFA52439.2022.9921510__In 2022 27th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA ). IEEE, 2022.https://doi.org/10.1109/ETFA52439.2022.9921510 .

Simo Kamga, Lionel, Dominik Meffert, Balázs Magyar, Manuel Oehler, and Bernd Sauer. “Simulative Investigation of the Influence of Surface Texturing on the Elastohydrodynamic Lubrication in Chain Joints.”https://doi.org/10.1016/j.triboint.2022.107564__Tribology International 171 (2022): 107564.https://doi.org/10.1016/j.triboint.2022.107564 .

Neumann, Stefan, Gerson Meschut, Mortaza Otroshi, Florian Kneuper, Andre Schulze, and Erman Tekkaya. “MECHANICALLY JOINED EXTRUSION PROFILES FOR BATTERY TRAYS,” 2022.

Schulz, Andreas Markus, Christian Wecker, Venkatesh Inguva, Alexey S. Lopatin, and Eugeny Y. Kenig. “A PLIC-Based Method for Species Mass Transfer at Free Fluid Interfaces.”https://doi.org/10.1016/j.ces.2021.117357__Chemical Engineering Science 250 (2022).https://doi.org/10.1016/j.ces.2021.117357 .

Wecker, Christian, Andreas Markus Schulz, Jens Heine, Hans Jörg Bart, and Eugeny Y. Kenig. “Droplet Formation –a Numerical Investigation of Liquid-Liquid Systems with Consideration of Marangoni Convection.”https://doi.org/10.1016/j.ijheatmasstransfer.2021.122465__International Journal of Heat and Mass Transfer 188 (2022).https://doi.org/10.1016/j.ijheatmasstransfer.2021.122465 .

Dai, Daokun, Eugeny Y. Kenig, and Reiner Numrich. “Experimentelle Untersuchung Der Tropfenkondensation Am Chemisch Modifizierten EdelstahlDrallrohr.”https://doi.org/10.1002/cite.202100176__Chemie Ingenieur Technik 94, no. 6 (2022): 905–11.https://doi.org/10.1002/cite.202100176 .

Inguva, Venkatesh, Eugeny Y. Kenig, and J. Blair Perot. “A Front-Tracking Method for Two-Phase Flow Simulation with No Spurious Currents.” Journal of Computational Physics 456 (2022).

BAJTOSOVÁ, Lucia, Olexandr Grydin, Mykhailo STOLBCHENKO, Mirko Schaper, Barbora KIVSKÁ, Rostislav KRÁLÍK, Michaela SLAPÁKOVÁ, and Miroslav CIESLAR. “Phase Identification in Twin-Roll Cast Al-Li Alloys.”https://doi.org/10.37904/metal.2022.4437__In METAL 2022 Conference Proeedings. TANGER Ltd., 2022.https://doi.org/10.37904/metal.2022.4437 .

Abdelaal, Osama, Florian Hengsbach, Mirko Schaper, and Kay-Peter Hoyer. “LPBF Manufactured Functionally Graded Lattice Structures Obtained by Graded Density and Hybrid Poisson’s Ratio.”https://doi.org/10.3390/ma15124072__Materials 15, no. 12 (2022).https://doi.org/10.3390/ma15124072 .

Voswinkel, Dietrich, Jan Andre Striewe, Olexandr Grydin, Dennis Meinderink, Guido Grundmeier, Mirko Schaper, and Thomas Tröster. “Co-Bonding of Carbon Fibre-Reinforced Epoxy and Galvanised Steel with Laser Structured Interface for Automotive Applications.”https://doi.org/10.1080/09243046.2022.2143746__Advanced Composite Materials, 2022, 1–16.https://doi.org/10.1080/09243046.2022.2143746 .

Pramanik, Sudipta, Frederik Tasche, Kay-Peter Hoyer, and Mirko Schaper. “Orientation-Dependent Indentation Behaviour of Additively Manufactured FeCo Sample: A Quasi In-Situ Study.”https://doi.org/10.3390/magnetism2020007__Magnetism 2 (2022): 88–104.https://doi.org/10.3390/magnetism2020007 .

Reitz, Alexander, Olexandr Grydin, and Mirko Schaper. “Optical Detection of Phase Transformations in Steels: An Innovative Method for Time-Efficient Material Characterization During Tailored Thermo-Mechanical Processing of a Press Hardening Steel.”https://doi.org/10.1007/s11661-022-06732-z__Metallurgical and Materials Transactions A 53, no. 8 (2022): 3125–42.https://doi.org/10.1007/s11661-022-06732-z .

Krüger, Jan Tobias, Kay-Peter Hoyer, Jingyuan Huang, Viviane Filor, Rafael Hernan Mateus-Vargas, Hilke Oltmanns, Jessica Meißner, Guido Grundmeier, and Mirko Schaper. “FeMn with Phases of a Degradable Ag Alloy for Residue-Free and Adapted Bioresorbability.”https://doi.org/10.3390/jfb13040185__Journal of Functional Biomaterials 13, no. 4 (2022): 185.https://doi.org/10.3390/jfb13040185 .

Slapáková, Michaela, Barbora Kivská, Klaudia Fekete, Rostislav Králík, Olexandr Grydin, Mykhailo Stolbchenko, and Mirko Schaper. “The Influence of Surface on Direction of Diffusion in Al-Fe Clad Material.”https://doi.org/10.1016/j.matchar.2022.112005__Materials Characterization 190 (2022).https://doi.org/10.1016/j.matchar.2022.112005 .

Westermann, Hendrik, Alexander Reitz, Rolf Mahnken, Mirko Schaper, and Olexandr Grydin. “Microstructure Transformations in a Press Hardening Steel during Tailored Thermomechanical Processing.”https://doi.org/10.1002/srin.202100346__Steel Research International, 2022.https://doi.org/10.1002/srin.202100346 .

Hein, Maxwell, David Kokalj, Nelson Filipe Lopes Dias, Dominic Stangier, Hilke Oltmanns, Sudipta Pramanik, Manfred Kietzmann, et al. “Low Cycle Fatigue Performance of Additively Processed and Heat-Treated Ti-6Al-7Nb Alloy for Biomedical Applications.”https://doi.org/10.3390/met12010122__Metals 12, no. 1 (2022).https://doi.org/10.3390/met12010122 .

Reitz, Alexander, Olexandr Grydin, and Mirko Schaper. “Influence of Thermomechanical Processing on the Microstructural and Mechanical Properties of Steel 22Mn.”https://doi.org/10.1016/j.msea.2022.142780__Materials Science and Engineering: A 838 (2022).https://doi.org/10.1016/j.msea.2022.142780 .

Krüger, Jan Tobias, Kay-Peter Hoyer, Jingyuan Huang, Viviane Filor, Rafael Hernan Mateus-Vargas, Hilke Oltmanns, Jessica Meißner, Guido Grundmeier, and Mirko Schaper. “FeMn with Phases of a Degradable Ag Alloy for Residue-Free and Adapted Bioresorbability.”https://doi.org/10.3390/jfb13040185__Journal of Functional Biomaterials 13, no. 4 (2022).https://doi.org/10.3390/jfb13040185 .

Vieth, P., M.-A. Garthe, Dietrich Voswinkel, Mirko Schaper, and Guido Grundmeier. “Enhancement of the Delamination Resistance of Adhesive Film Coated Surface Laser Melted Aluminum 7075- Alloy by Aminophosphonic Acid Adsorption.”https://doi.org/10.1016/j.surfcoat.2022.128835__Surface and Coatings Technology 447 (2022).https://doi.org/10.1016/j.surfcoat.2022.128835 .

Tillmann, Wolfgang, Nelson Filipe Lopes Dias, David Kokalj, Dominic Stangier, Maxwell Hein, Kay-Peter Hoyer, Mirko Schaper, Daria Gödecke, Hilke Oltmanns, and Jessica Meißner. “Tribo-Functional PVD Thin Films Deposited onto Additively Manufactured Ti6Al7Nb for Biomedical Applications.”https://doi.org/10.1016/j.matlet.2022.132384__Materials Letters, 2022.https://doi.org/10.1016/j.matlet.2022.132384 .

Teng, Zhenjie, Haoran Wu, Sudipta Pramanik, Kay-Peter Hoyer, Mirko Schaper, Hanlon Zhang, Christian Boller, and Peter Starke. “Characterization and Analysis of Plastic Instability in an Ultrafinegrained Medium Mn TRIP Steel.”https://doi.org/10.1002/adem.202200022__Advanced Engineering Materials, 2022.https://doi.org/10.1002/adem.202200022 .

Krüger, Jan Tobias, Kay-Peter Hoyer, Anatolii Andreiev, Mirko Schaper, and Carolin Zinn. “Modiû01cation of Iron with Degradable Silver Phases Processed via Laser Beam Melting for Implants with Adapted Degradation Rate.”https://doi.org/10.1002/adem.202201008__Advanced Engineering Materials, 2022.https://doi.org/10.1002/adem.202201008 .

Pramanik, Sudipta, Dennis Milaege, Kay-Peter Hoyer, and Mirko Schaper. “Additively Manufactured Nested and Non-Nested Cellular Solids for Effective Stress Distribution and Thermal Insulation Applications: An Experimental and Finite Element Analysis Study.”https://doi.org/10.3390/cryst12091217__Crystals 12, no. 9 (2022).https://doi.org/10.3390/cryst12091217 .

Krüger, Jan Tobias, Kay-Peter Hoyer, Jingyuan Huang, Viviane Filor, Rafael Hernan Mateus-Vargas, Hilke Oltmanns, Jessica Meißner, Guido Grundmeier, and Mirko Schaper. “FeMn with Phases of a Degradable Ag Alloy for Residue-Free and Adapted Bioresorbability.”https://doi.org/10.3390/jfb13040185__Journal of Functional Biomaterials 13, no. 4 (2022).https://doi.org/10.3390/jfb13040185 .

Abdelaal, Osama, Florian Hengsbach, Mirko Schaper, and Kay-Peter Hoyer. “LPBF Manufactured Functionally Graded Lattice Structures Obtained by Graded Density and Hybrid Poisson’s Ratio.”https://doi.org/10.3390/ma15124072__Materials 15, no. 12 (2022).https://doi.org/10.3390/ma15124072 .

Zibart, Alexander, Bernhard Spang, and Eugeny Y. Kenig. “Determination of the Burst Pressure of Pillow Plates Using Finite Element Methods.”https://doi.org/10.1016/b978-0-323-95879-0.50022-9__In Computer Aided Chemical Engineering, 51:127–32. Elsevier, 2022.https://doi.org/10.1016/b978-0-323-95879-0.50022-9 .

Hein, Maxwell, Nelson Filipe Lopes Dias, David Kokalj, Dominic Stangier, Kay-Peter Hoyer, Wolfgang Tillmann, and Mirko Schaper. “On the Influence of Physical Vapor Deposited Thin Coatings on the Low-Cycle Fatigue Behavior of Additively Processed Ti-6Al-7Nb Alloy.”https://doi.org/10.1016/j.ijfatigue.2022.107235__International Journal of Fatigue 166 (2022).https://doi.org/10.1016/j.ijfatigue.2022.107235 .

Krüger, Jan Tobias, Kay-Peter Hoyer, Florian Hengsbach, and Mirko Schaper. “Formation of Insoluble Silver-Phases in an Iron-Manganese Matrix for Bioresorbable Implants Using Varying Laser Beam Melting Strategies.”https://doi.org/10.1016/j.jmrt.2022.06.006__Journal of Materials Research and Technology 19 (2022): 2369–87.https://doi.org/10.1016/j.jmrt.2022.06.006 .