Kruse, Anne. Entwicklung einer Methode zur Integration der Additiven Fertigung in die Serienproduktion am Beispiel des Lasersinterns. Vol. 27. Forschungsberichte des Direct Manufacturing Research Centers , 2023.
LibreCat: /record/44509

Ott, Manuel, Niclas Meihöfener, and Iryna Mozgova. “Methodical Approach to Reducing Design Time by Using Neural Networks in Early Stages of Concept Development.” In Proceedings of the 34rd Annual International Solid Freeform Fabrication Symposium 2023, edited by Manuel Ott. Austin, Texas, United States, 2023.
LibreCat: /record/46957

Ott, Manuel, Niclas Meihöfener, and Rainer Koch. “Neuronale Netze in der Konstruktion zur Ausschöpfung der Potentiale additiver Fertigungstechnologien.”https://doi.org/10.48447/ADD-2022-014__In Bericht 407 - 7. Tagung des DVM-Arbeitskreises Additiv gefertigte Bauteile und Strukturen, edited by Deutscher Verband für Materialforschung und -prüfung e.V. , 7:91–106. Bericht 407 - 7. Tagung des DVM-Arbeitskreises Additiv gefertigte Bauteile und Strukturen. Berlin, 2022.https://doi.org/10.48447/ADD-2022-014 .
LibreCat: /record/36866
DOI: 10.48447/ADD-2022-014

Ott, Manuel, Niclas Meihöfener, and Rainer Koch. “Boosting Artificial Intelligence in Design Processes by the Use of Additive Manufacturing.” In Proceedings of the 33rd Annual International Solid Freeform Fabrication Symposium 2022, 33:696–705. Proceedings of the 33rd Annual International Solid Freeform Fabrication Symposium 2022. Austin, Texas, 2022.
LibreCat: /record/36871

Koch, Rainer, Iris Gräßler, Detmar Zimmer, and Thomas Tröster, eds. Mehrzieloptimierte und durchgängig automatisierte Bauteilentwicklung für Additive Fertigungsverfahren im Produktentstehungsprozess - Ergebnisbericht des BMBF Verbundprojektes OptiAMix. Vol. 25. Forschungsberichte des Direct Manufacturing Research Centers (DMRC). Düren: Shaker Verlag, 2021.
LibreCat: /record/26996

Kruse, Anne, Manuel Ott, Lena Risse, and Rainer Koch. “D-Druck - Eine Technologie als Schlüssel zur Steigerung der Teilhabe.”https://doi.org/10.48447/Add-2021-016__Additiv gefertigte Bauteile und Strukturen. Deutscher Verband für Materialforschung und -prüfung e.V., 2021.https://doi.org/10.48447/Add-2021-016 .
LibreCat: /record/36845
DOI: 10.48447/Add-2021-016

Habdank, Matthias. Entwicklung eines Konzepts zum qualitätsorientierten Monitoring von Social Media in der zivilen Gefahrenabwehr. Düren: Shaker Verlag, 2020.
LibreCat: /record/42046

Schultz, Andreas Maximilian, Christoph Lamers, Rainer Koch, Richard Lüke, and Torben Sauerland. “IRiS – Intelligente Rettung im SmartHome.” vfdb-Zeitschrift 4 (2020).
LibreCat: /record/22898

Rohde, Johannes . Prozessbasierte Technologieintegration der Additiven Fertigung in Unternehmen. Vol. 16. Forschungsbericht des Direct Manufacturing Research Centers. Düren: Shaker Verlag, 2019.
LibreCat: /record/24752

Jahnke, Ulrich. Systematik zum präventiven Schutz vor Produktpiraterie durch Additive Fertigungsverfahren. Vol. 13. Forschungsbericht des Direct Manufacturing Research Centers. Düren: Shaker Verlag, 2019.
LibreCat: /record/24759

Reiher, Thomas. Intelligente Optimierung von Produktgeometrien für die additive Fertigung. Vol. 12. Forschungsbericht des Direct Manufacturing Research Centers. Düren: Shaker Verlag, 2019.
LibreCat: /record/24761

Deppe, Gereon. Entwicklung einer Entscheidungsunterstützung für den Einsatz Additiver Fertigung in der zeitkritischen Ersatzteilversorgung. Vol. 9. Forschungsbericht des Direct Manufacturing Research Centers. Düren: Shaker Verlag, 2019.
LibreCat: /record/24762

Kruse, Anne, and Michael Mummert. “Mit 3D-Druck umfassende Teilhabe möglich machen .” Werkstatt:Dialog, no. 4 (2019): 34–35.
LibreCat: /record/36846

Schäfer, Christina . Entwicklung eines Vorgehens zum Safety Assessment für sicherheits-kritische Informationssysteme in der zivilen Gefahrenabwehr am Beispiel der Feuerwehr. Hamburg: tredition GmbH, 2019.
LibreCat: /record/42060

Schultz, Andreas Maximilian, Torben Sauerland, Thomas Werner, Sebastian Rammert, Therese Habig, Robin Marterer, and Lars Scheuermann. Digitale Transformation in der zivilen Gefahrenabwehr, 2019.
LibreCat: /record/48369

Büsching, J., C. Lindemann, U. Jahnke, A. Kruse, and R. Koch. “Technology Integration into Existing Companies.”http://utw10945.utweb.utexas.edu/sites/default/files/2018/002%20TechnologyIntegrationintoExistingCompanies.pdf__In 29th Annual International Solid Freeform Fabrication Symposium, 29:14–31, 2018.http://utw10945.utweb.utexas.edu/sites/default/files/2018/002%20TechnologyIntegrationintoExistingCompanies.pdf .
LibreCat: /record/21696
DOI: http://utw10945.utweb.utexas.edu/sites/default/files/2018/002%20TechnologyIntegrationintoExistingCompanies.pdf

Lindemann, Christian-Friedrich Wilhelm. Systematic Approach for Cost Efficient Design and Planning with Additive Manufacturing, 2018.
LibreCat: /record/42768

Deppe, G., R. Koch, and M. Kaesberg. “Rational Decision-Making for the Beneficial Application of Additive Manufacturing.”http://utw10945.utweb.utexas.edu/sites/default/files/2017/Manuscripts/RationalDecisionMakingfortheBeneficialApplic.pdf__In 28th Annual International Solid Freeform Fabrication Symposium, 28:2597–2611, 2017.http://utw10945.utweb.utexas.edu/sites/default/files/2017/Manuscripts/RationalDecisionMakingfortheBeneficialApplic.pdf .
LibreCat: /record/21690
DOI: http://utw10945.utweb.utexas.edu/sites/default/files/2017/Manuscripts/RationalDecisionMakingfortheBeneficialApplic.pdf

Reiher, T., S. Vogelsang, and R. Koch. “Computer Integration for Geometry Generation for Product Optimization with Additive Manufacturing.”http://utw10945.utweb.utexas.edu/sites/default/files/2017/Manuscripts/ComputerIntegrationforGeometryGenerationforP.pdf__In 28th Annual International Solid Freeform Fabrication Symposium, 28:903–21, 2017.http://utw10945.utweb.utexas.edu/sites/default/files/2017/Manuscripts/ComputerIntegrationforGeometryGenerationforP.pdf .
LibreCat: /record/21691
DOI: http://utw10945.utweb.utexas.edu/sites/default/files/2017/Manuscripts/ComputerIntegrationforGeometryGenerationforP.pdf

Kruse, A., T. Reiher, and R. Koch. “Integrating AM into Existing Companies - Selection of Existing Parts for Increase of Acceptance.”http://utw10945.utweb.utexas.edu/sites/default/files/2017/Manuscripts/IntegratingAMintoExistingCompaniesSelection.pdf__In 28th Annual International Solid Freeform Fabrication Symposium, 28:2575–84, 2017.http://utw10945.utweb.utexas.edu/sites/default/files/2017/Manuscripts/IntegratingAMintoExistingCompaniesSelection.pdf .
LibreCat: /record/21692
DOI: http://utw10945.utweb.utexas.edu/sites/default/files/2017/Manuscripts/IntegratingAMintoExistingCompaniesSelection.pdf

Jahnke, U., R. Koch, and A. T. Oppermann. “Design for Protection: Systematic Approach to Prevent Product Piracy during Product Development Using AM .”http://utw10945.utweb.utexas.edu/sites/default/files/2017/Manuscripts/DesignforProtectionSystematicApproachtoPrev.pdf__In 28th Annual International Solid Freeform Fabrication Symposium, 28:2481–92, 2017.http://utw10945.utweb.utexas.edu/sites/default/files/2017/Manuscripts/DesignforProtectionSystematicApproachtoPrev.pdf .
LibreCat: /record/21693
DOI: http://utw10945.utweb.utexas.edu/sites/default/files/2017/Manuscripts/DesignforProtectionSystematicApproachtoPrev.pdf

Büsching, J., and R. Koch. “Ramp-Up-Management in Additive Manufacturing – Technology Integration in Existing Business Processes.”http://utw10945.utweb.utexas.edu/sites/default/files/2017/Manuscripts/RampUpManagementinAdditiveManufacturingTec.pdf__In 28th Annual International Solid Freeform Fabrication Symposium, 28:2585–96, 2017.http://utw10945.utweb.utexas.edu/sites/default/files/2017/Manuscripts/RampUpManagementinAdditiveManufacturingTec.pdf .
LibreCat: /record/21694
DOI: http://utw10945.utweb.utexas.edu/sites/default/files/2017/Manuscripts/RampUpManagementinAdditiveManufacturingTec.pdf

Reiher, T., S. Vogelsang, and R. Koch. “Computer Integration for Geometry Generation for Product Optimization with Additive Manufacturing.”http://utw10945.utweb.utexas.edu/sites/default/files/2017/Manuscripts/ComputerIntegrationforGeometryGenerationforP.pdf__In 28th Annual International Solid Freeform Fabrication Symposium, 28:903–21, 2017.http://utw10945.utweb.utexas.edu/sites/default/files/2017/Manuscripts/ComputerIntegrationforGeometryGenerationforP.pdf .
LibreCat: /record/21695
DOI: http://utw10945.utweb.utexas.edu/sites/default/files/2017/Manuscripts/ComputerIntegrationforGeometryGenerationforP.pdf

Deppe, G., and C. Lindemann. “Hybrid Manufacturing with Additive Manufacturing.”https://www.cecimo.eu/wp-content/uploads/2019/03/CECIMO-Magazine-Spring-2017-LQ.pdf__CECIMO Magazine 17, no. 11 (2017): 28–29.https://www.cecimo.eu/wp-content/uploads/2019/03/CECIMO-Magazine-Spring-2017-LQ.pdf .
LibreCat: /record/21697
DOI: https://www.cecimo.eu/wp-content/uploads/2019/03/CECIMO-Magazine-Spring-2017-LQ.pdf

Reiher, T., C. Lindemann, U. Jahnke, G. Deppe, and R. Koch. “Holistic Approach for Industrializing AM Technology - from Part Selection to Test and Verification.”https://doi.org/10.1007/s40964-017-0018-y__Progress in Additive Manufacturing 2 (2017): 43–55.https://doi.org/10.1007/s40964-017-0018-y .
LibreCat: /record/21704
DOI: https://doi.org/10.1007/s40964-017-0018-y

Seifert, Andreas, and Niclas Schaper. “Veränderungen des bildungswissenschaftlichen Wissens und der subjektiven Kompetenzeinschätzungen von Studierenden im Praxissemester.” In 2. Internationalen Kongress eLernen in der Praxis.“, 2017.
LibreCat: /record/41389

Plaß, Marco. Akteurzentrierte Unterstützung bei Gefahrensituationen in der U-Bahn. Hamburg: tredition GmbH, 2017.
LibreCat: /record/42085

Deppe, G., and R. Koch. “Supporting the Decision Process for Applying Additive Manufacturing in the MRO Aerospace Business by MADM.”http://utw10945.utweb.utexas.edu/sites/default/files/2016/006-Deppe.pdf__In 27th Annual International Solid Freeform Fabrication Symposium , 27:81–92, 2016.http://utw10945.utweb.utexas.edu/sites/default/files/2016/006-Deppe.pdf .
LibreCat: /record/21687
DOI: http://utw10945.utweb.utexas.edu/sites/default/files/2016/006-Deppe.pdf

Reiher, T., and R. Koch. “Product Optimization with and for Additive Manufacturing.”http://utw10945.utweb.utexas.edu/sites/default/files/2016/179-Reiher.pdf__In 27th Annual International Solid Freeform Fabrication Symposium , 27:2236–49, 2016.http://utw10945.utweb.utexas.edu/sites/default/files/2016/179-Reiher.pdf .
LibreCat: /record/21688
DOI: http://utw10945.utweb.utexas.edu/sites/default/files/2016/179-Reiher.pdf

Lindemann, C., and R. Koch. “Cost Efficient Design and Planning for Additive Manufacturing Technologies.”http://utw10945.utweb.utexas.edu/sites/default/files/2016/007-Lindemann.pdf__In 27th Annual International Solid Freeform Fabrication Symposium , 27:93–112, 2016.http://utw10945.utweb.utexas.edu/sites/default/files/2016/007-Lindemann.pdf .
LibreCat: /record/21689
DOI: http://utw10945.utweb.utexas.edu/sites/default/files/2016/007-Lindemann.pdf

Lindemann, C., G. Deppe, and R. Koch. Scenario Based Outlook of Additive Manufacturing Applications for the Aerospace Market. Metropolis Verlag, 2016.
LibreCat: /record/21698

Jahnke, U., and R. Koch. Prevention of Product Piracy - Potentials of Additive Manufacturing. Metropolis Verlag, 2016.
LibreCat: /record/21699

Reiher, T., G. Deppe, and R. Koch. “Combining Material Efficiency and Part Reliability by Product Optimization Applying Additive Manufacturing.”https://www.th-owl.de/elsa/download/333/334/PEM_2016_Proceeding_2016_09_14_Inhaltsnavigation.pdf__In International Conference Production Engineering and Management 2016, 6:27–38, 2016.https://www.th-owl.de/elsa/download/333/334/PEM_2016_Proceeding_2016_09_14_Inhaltsnavigation.pdf .
LibreCat: /record/21702
DOI: https://www.th-owl.de/elsa/download/333/334/PEM_2016_Proceeding_2016_09_14_Inhaltsnavigation.pdf

Deppe, G., and R. Koch. “Unterstützung Des AM Entscheidungsprozesses in Der Luftfahrtersatzteilversorgung.”https://doi.org/10.3139/9783446450608.031__In Rapid Tech 2016, 13:349–60. Hanser Verlag, 2016.https://doi.org/10.3139/9783446450608.031 .
LibreCat: /record/21705
DOI: https://doi.org/10.3139/9783446450608.031

Schneider, Steffen . Konzeptentwicklung zur Einbindung von Simulationen - Unterstützung des Informationsmanagements im Bereich der zivilen Gefahrenabwehr. Shaker Verlag, 2016.
LibreCat: /record/42045

Lindemann, C., U. Jahnke, T. Reiher, and R. Koch. “Towards a Sustainable and Economic Selection of Part Candidates for Additive Manufacturing.”https://doi.org/10.1108/RPJ-12-2014-0179__In Rapid Prototyping Journal, 21:216–27. Emerald, 2015.https://doi.org/10.1108/RPJ-12-2014-0179 .
LibreCat: /record/21683
DOI: https://doi.org/10.1108/RPJ-12-2014-0179

Deppe, G., C. Lindemann, and R. Koch. “Developement of an Economic Decision Support for the Application of Additive Manufacturing in Aerospace.”http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-125-Deppe.pdf__In 26th Annual International Solid Freeform Fabrication Symposium, 26:1560–63, 2015.http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-125-Deppe.pdf .
LibreCat: /record/21684
DOI: http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-125-Deppe.pdf

Jahnke, U., J. Büsching, T. Reiher, and R. Koch. “Protection Measures against Product Piracy and Application by the Use of AM.”http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-128-Jahnke.pdf__In 26th Annual International Solid Freeform Fabrication Symposium, 26:1601–11, 2015.http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-128-Jahnke.pdf .
LibreCat: /record/21685
DOI: http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-128-Jahnke.pdf

Reiher, T., and R. Koch. “FE-Optimization and Data Handling for Additive Manufacturing of Structural Parts.”http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-90-Reiher.pdf__In 26th Annual International Solid Freeform Fabrication Symposium, 26:1092–1103, 2015.http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-90-Reiher.pdf .
LibreCat: /record/21686
DOI: http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-90-Reiher.pdf

Jahnke, U., and C. Lindemann. “Sustainable Part Selection for the Use of Additive Manufacturing in Companies Focussing on Prevention of Product Piracy.” In Inside 3D Printing Conference and Expo, 2015.
LibreCat: /record/21700

Deppe, G., T. Reiher, and R. Koch. “Exploring the Cost and Lifetime Benefits of a Topology Optimized Aerospace Part Applying Additive Manufacturing.”https://www.th-owl.de/elsa/download/335/336/PEM_Tagung_zusammen2015.pdf__In International Conference Production Engineering and Management 2015, 5:219–30, 2015.https://www.th-owl.de/elsa/download/335/336/PEM_Tagung_zusammen2015.pdf .
LibreCat: /record/21701
DOI: https://www.th-owl.de/elsa/download/335/336/PEM_Tagung_zusammen2015.pdf

Lindemann, C., T. Reiher, and R. Koch. “Guidelines for a Sustainable and Economic Selection of Part Candidates for Space Applications Using Additive Manufacturing.” In Paris Space Week, 2015.
LibreCat: /record/21703

Deppe, G., and R. Koch. “Exploring the Influence of an Additive Manufacturing Integration on Future MRO Processes in Aeronautics.”https://www.rtejournal.de/ausgabe11/3958__Rtejournal 2014, no. 11 (2014).https://www.rtejournal.de/ausgabe11/3958 .
LibreCat: /record/21706
DOI: https://www.rtejournal.de/ausgabe11/3958

Lindemann, C., U. Jahnke, M. Moi, and R. Koch. “Impact and Influence Factors of Additive Manufacturing on Product Lifecycle Costs.”http://utw10945.utweb.utexas.edu/Manuscripts/2013/2013-79-Lindemann.pdf__In 24th Annual International Solid Freeform Fabrication Symposium, 24:998–1008, 2013.http://utw10945.utweb.utexas.edu/Manuscripts/2013/2013-79-Lindemann.pdf .
LibreCat: /record/21682
DOI: http://utw10945.utweb.utexas.edu/Manuscripts/2013/2013-79-Lindemann.pdf

Becker, Tobias . Qualitätsmanagement in Der Zivilen Gefahrenabwehrf: Optimierung von Führungsprozessen Durch Interaktive SOPs , 2013.
LibreCat: /record/42097

Lindemann, C., U. Jahnke, M. Moi, and R. Koch. “Analyzing Product Lifecycle Costs for a Better Understanding of Cost Drivers in Additve Manufacturing.”http://utw10945.utweb.utexas.edu/Manuscripts/2012/2012-12-Lindemann.pdf__In 23rd Annual International Solid Freeform Fabrication Symposium, 23:177–88, 2012.http://utw10945.utweb.utexas.edu/Manuscripts/2012/2012-12-Lindemann.pdf .
LibreCat: /record/21680
DOI: http://utw10945.utweb.utexas.edu/Manuscripts/2012/2012-12-Lindemann.pdf