Triebus, Marcel, and Thomas Tröster. “HyOpt - Optimization-Based Development of Hybrid Materials.” In 9th NRW Nano Conference - Innovations in Materials and Applications, 2021.
LibreCat: /record/21726

Camberg, Alan Adam, Tobias Erhart, and Thomas Tröster. “A Generalized Stress State and Temperature Dependent Damage Indicator Framework for Ductile Failure Prediction in Heat-Assisted Forming Operations.”https://doi.org/10.3390/ma14175106__Materials 14, no. 17 (2021).https://doi.org/10.3390/ma14175106 .
LibreCat: /record/33895
DOI: 10.3390/ma14175106

Camberg, Alan Adam. Festigkeitssteigerung von Aluminiumblechformteilen der 5000-Serie durch Erweiterung der Formgebungsgrenzen stark kaltverfestigter Ausgangswerkstoffe. Vol. 2021,52. Schriftenreihe Institut für Leichtbau mit Hybridsystemen. Shaker Verlag, 2021.https://doi.org/10.2370/9783844082715 .
LibreCat: /record/37579
DOI: 10.2370/9783844082715

Huber, Johannes. Beitrag zur Reduzierung der Fehlerhäufigkeit bei der Online-Lackierung von SMC-Außenhautbauteilen. Vol. 2021,50. Schriftenreihe Institut für Leichtbau mit Hybridsystemen. Shaker Verlag, 2021.
LibreCat: /record/37586

Pöhler, Simon. Konzeptionierung und Auslegung eines Vorderachsträgers in hybrider Leichtbauweise im C-Segment. Vol. 2021,49. Schriftenreihe Institut für Leichtbau mit Hybridsystemen. Shaker Verlag, 2021.
LibreCat: /record/37584

Steinfelder, Christian, Sven Martin, Alexander Brosius, and Thomas Tröster. “Load Path Transmission in Joining Elements.”https://doi.org/10.4028/www.scientific.net/kem.883.73__Key Engineering Materials, 2021, 73–80.https://doi.org/10.4028/www.scientific.net/kem.883.73 .
LibreCat: /record/24541
DOI: 10.4028/www.scientific.net/kem.883.73

Martin, Sven, and Thomas Tröster. “Joint point loadings in car bodies – the influence of manufacturing tolerances and scatter in material properties.”https://doi.org/10.25518/esaform21.3801__ESAFORM 2021, 2021.https://doi.org/10.25518/esaform21.3801 .
LibreCat: /record/24548
DOI: 10.25518/esaform21.3801

Stallmeister, Tim, Sven Martin, Thorsten Marten, and Thomas Tröster. “Experimental Investigation on Lightweight Potentials of Fiber-Metal-Laminates for Automotive Battery Cases,” 2021.
LibreCat: /record/26994

Camberg, Alan Adam, Tobias Erhart, and Thomas Tröster. “A Generalized Stress State and Temperature Dependent Damage Indicator Framework for Ductile Failure Prediction in Heat-Assisted Forming Operations.”https://doi.org/10.3390/ma14175106__Materials, 2021.https://doi.org/10.3390/ma14175106 .
LibreCat: /record/24009
DOI: 10.3390/ma14175106

Andreiev, Anatolii, Kay-Peter Hoyer, Dimitri Dula, Florian Hengsbach, Michael Haase, Jan Gierse, Detmar Zimmer, Thomas Tröster, and Mirko Schaper. “Soft-Magnetic Behavior of Laser Beam Melted FeSi3 Alloy with Graded Cross-Section.”https://doi.org/10.1016/j.jmatprotec.2021.117183__Journal of Materials Processing Technology, 2021.https://doi.org/10.1016/j.jmatprotec.2021.117183 .
LibreCat: /record/23898
DOI: 10.1016/j.jmatprotec.2021.117183

Ahlers, Dominik. Parameter- und Prozessoptimierung für den additiven Fertigungsprozess im Pulverbett am Beispiel der Legierung Ti6Al4V . Vol. 19. Forschungsberichte des Direct Manufacturing Research Centers. Shaker, 2020.
LibreCat: /record/21209

Hielscher, Christian, Julian Grenz, Alan Adam Camberg, and Nils Wingenbach. “Ansatz zur effizienteren Auslegung von Hybridbauteilen.”https://doi.org/10.1007/s35148-020-0284-8__ATZ - Automobiltechnische Zeitschrift, 2020, 60–65.https://doi.org/10.1007/s35148-020-0284-8 .
LibreCat: /record/17812
DOI: 10.1007/s35148-020-0284-8

Hielscher, Christian, Julian Grenz, Alan Adam Camberg, and Nils Wingenbach. “Approach to More Efficient Design of Hybrid Components.”https://doi.org/10.1007/s38311-020-0267-0__ATZ Worldwide, 2020, 58–61.https://doi.org/10.1007/s38311-020-0267-0 .
LibreCat: /record/17813
DOI: 10.1007/s38311-020-0267-0

Wu, Tao, Steffen Rainer Tinkloh, Thomas Tröster, and Wolfgang Zinn. “Residual Stress Measurement in GFRP/Steel Hybrid Components.” In Proceedings of the 4th International Conference Hybrid 2020 Materials and Structures, 2020.
LibreCat: /record/20843

Camberg, Alan Adam, and Thomas Tröster. “A Simplified Method for the Evaluation of the Layer Compression Test Using One 3D Digital Image Correlation System and Considering the Material Anisotropy by the Equibiaxial Lankford Parameter.”https://doi.org/10.1088/1757-899X/967/1/012077https://doi.org/10.1088/1757-899X/967/1/012077_IOP Conference Series: Materials Science and Engineering, 2020.https://doi.org/10.1088/1757-899X/967/1/012077 .
LibreCat: /record/20854
DOI: 10.1088/1757-899X/967/1/012077

Camberg, Alan Adam, Tobias Erhart, and Thomas Tröster. “Predicting Fracture at Non-Isothermal Forming Conditions: A Temperature Dependent Extension of the LS-DYNA GISSMO Fracture Indicator Framework,”https://doi.org/10.13140/RG.2.2.23924.17288__2020.https://doi.org/10.13140/RG.2.2.23924.17288 .
LibreCat: /record/20856
DOI: 10.13140/RG.2.2.23924.17288

Schweizer, Swetlana, Emine Fulya Akbulut Irmak, and Thomas Tröster. “Wood-Based Materials as a Sustainable Alternative for Future Car Body Construction.” Automotive Circle, 2020.
LibreCat: /record/21712

Triebus, Marcel, and Thomas Tröster. “A Holistic Approach to Optimization-Based Design of Hybrid Materials.” In Proceedings 4th International Conference Hybrid Materials &; Structures, 2020.
LibreCat: /record/16939

Claes, Leander, Elmar Baumhögger, Torben Rüther, Jan Gierse, Thomas Tröster, and Bernd Henning. “Reduction of Systematic Measurement Deviation in Acoustic Absorption Measurement Systems.” In Fortschritte Der Akustik - DAGA 2020, 1077–80, 2020.
LibreCat: /record/15490

Tinkloh, Steffen Rainer, Tao Wu, Thomas Tröster, and Thomas Niendorf. “Numerical Investigation of the Hole-Drilling Method Applied to Intrinsic Manufactured Metal-CFRP Hybrids.” In Proceedings of the 4th International Conference Hybrid 2020 Materials and Structures, 2020.
LibreCat: /record/16930

Wu, Tao, Steffen Rainer Tinkloh, Thomas Tröster, Wolfgang Zinn, and Thomas Niendorf. “Determination and Validation of Residual Stresses in CFRP/Metal Hybrid Components Using the Incremental Hole Drilling Method.”https://doi.org/10.3390/jcs4030143__Journal of Composites Science, 2020.https://doi.org/10.3390/jcs4030143 .
LibreCat: /record/20842
DOI: 10.3390/jcs4030143

Huxol, Andrea. Beitrag zur Qualitätssicherung in der additiven Fertigung individueller Produkte aus CoCr-Legierungen. Vol. 2020,42. Schriftenreihe Institut für Leichtbau mit Hybridsystemen. Shaker Verlag, 2020.
LibreCat: /record/37585

Tinkloh, Steffen Rainer, Tao Wu, Thomas Tröster, and Thomas Niendorf. “A Micromechanical-Based Finite Element Simulation of Process-Induced Residual Stresses in Metal-CFRP-Hybrid Structures.”https://doi.org/10.1016/j.compstruct.2020.111926__Composite Structures 238 (2020).https://doi.org/10.1016/j.compstruct.2020.111926 .
LibreCat: /record/15945
DOI: 10.1016/j.compstruct.2020.111926

Chalicheemalapalli Jayasankar, Deviprasad, Tim Stallmeister, Zheng Wang, and Thomas Tröster. “MANUFACTURING OF HYBRID COMPONENTS BY VARTM-PROCESS USING NEW SEALING TECHNIQUE DEVELOPED.” In Hybrid 2020 Materials and Structures, edited by Joachim M Hausmann, Marc  Siebert, Axel von Hehl, and Kay André Weidenmann, 167–72, 2020.
LibreCat: /record/27417

Ahlers, Dominik, and Thomas Tröster. Schlussbericht zum Vorhaben “Additive Leichtbaustrukturen für Flugzeugkomponenten”f: Verbund: KOBFS - Kostenoptimierter Baukasten für Flügelsysteme. TIB: Universität Paderborn, 2019.https://doi.org/10.2314/KXP:1695591887 .
LibreCat: /record/21210
DOI: https://doi.org/10.2314/KXP:1695591887

Pfeifer, Florian, André Dietrich, Thorsten Marten, Thomas Tröster, and Bernard Nacke. “Investigation on Inductive Heating of Sheet Metal for an Industrial Hot Stamping Process.” In Proceedings of 7th International Conference on Hot Sheet Metal Forming of High-Performance Steel, 585–93, 2019.
LibreCat: /record/16793

Striewe, Jan André, Robert Thomas, Fabian Fischer, Timo Wiens, and Thomas Tröster. “Energieabsorptions- Und Versagensverhalten Eines Automobilen Seitenschwellers Mit Lokaler Verstärkung Aus Kohlenstofffaserverstärktem Kunststoff Nach Alterung.” Sankt Augustin: DGM-Inventum GmbH , 2019.
LibreCat: /record/16794

Ahlers, Dominik, and Thomas Tröster. Performance Parameters and HIP Routes for Additively Manufactured Titanium Alloy Ti6Al4V. EuroPM 2019 Congress &; Exhibition – SIS: Optimising the Properties of AM Parts Using Hot Isostatic Pressing. Maastricht: EuroPM, 2019.
LibreCat: /record/16825

Camberg, Alan Adam, and Christian Hielscher. “A Holistic Approach to the Lightweight Design of Tailored Structural Components Using the Example of a Hybrid A-Pillar.” In Aachen Body Engineering Days 2019, 2019.
LibreCat: /record/16826

Camberg, Alan Adam, and Thomas Tröster. “Challenges in Fracture Modeling under Non-Isothermal Forming Conditions Using the Example of a New Forming Process for Aluminum Blanks.” In 26. Sächsische Fachtagung Umformtechnik, 2019.
LibreCat: /record/16827

Tinkloh, Steffen Rainer, Tao Wu, Thomas Tröster, and Thomas Niendorf. “A Micromechanical Based Finite Element Simulation of Process Induced Residual Stresses in Metal-CFRP-Hybrid Structures,” 2019.
LibreCat: /record/16831

Camberg, Alan Adam, Thomas Tröster, F. Bohner, and J. Tölle. “Predicting Plasticity and Fracture of Severe Pre-Strained EN AW-5182 by Yld2000 Yield Locus and Hosford-Coulomb Fracture Model in Sheet Forming Applications.”https://doi.org/10.1088/1757-899X/651/1/012057__IOP Conference Series: Materials Science and Engineering 651 (2019): 012057.https://doi.org/10.1088/1757-899X/651/1/012057 .
LibreCat: /record/15875
DOI: 10.1088/1757-899X/651/1/012057

Akbulut Irmak, Emine Fulya, and Thomas Tröster. “Fracture Prediction of Additively Manufactured AlSi10Mg Materials.”https://doi.org/10.1016/j.prostr.2019.12.101__Procedia Structural Integrity, 2019, 190–97.https://doi.org/10.1016/j.prostr.2019.12.101 .
LibreCat: /record/15950
DOI: 10.1016/j.prostr.2019.12.101

Akbulut Irmak, Emine Fulya, Julius Hanses, Swetlana Schweizer, and Thomas Tröster. “Modeling the Energy Absorption Characteristics of Wood Crash Elements,” 2019.
LibreCat: /record/15976

Marten, Thorsten, and Thomas Tröster. Einsatz neuartiger Stähle und Generierung gradierter Leichtbaustrukturen im Presshärteprozess. Düsseldorf: Forschungsvereinigung Stahlanwendung e.V. im Stahl Zentrum, 0, Verlag und Vertriebsgesellschaft mbH, 2019.
LibreCat: /record/16029

Triebus, Marcel, S. Bienia, Thorsten Marten, Thomas Tröster, and K. Dröder. “Press Hardening Integrated Structuring for Hybrid Components.” Verlag Wissenschaftliche Scripten, 2019.
LibreCat: /record/16030

Camberg, Alan Adam, Ina Stratmann, and Thomas Tröster. “TAILORED STACKED HYBRIDS – AN OPTIMIZATION-BASED APPROACH IN MATERIAL DESIGN FOR FURTHER IMPROVEMENT IN LIGHTWEIGHT CAR BODY STRUCTURES.”https://doi.org/10.1007/978-3-662-58206-0_12__In Technologies for Economical and Functional Lightweight Design. Berlin, Heidelberg, 2019.https://doi.org/10.1007/978-3-662-58206-0_12 .
LibreCat: /record/13436
DOI: 10.1007/978-3-662-58206-0_12

Stallmeister, Tim, Deviprasad Chalicheemalapalli Jayasankar, Z. Wang, and Thomas Tröster. “Self-Sealing Tool Concept for RTM-Processes,” 2019.
LibreCat: /record/16032

Stallmeister, Tim, Deviprasad Chalicheemalapalli Jayasankar, Z. Wang, and Thomas Tröster. “Selbstabdichtendes Werkzeugkonzept für RTM-Prozesse,” 2019.
LibreCat: /record/16033

Opdemom, Hermann. Experimentelle Untersuchung einse modifzierten Nasspressverfahrens für die Herstellung von hybriden Metall-Faserverbundkunststoff-Bauteilen. Vol. 2019,35. Schriftenreihe Institut für Leichtbau mit Hybridsystemen. Shaker Verlag, 2019.
LibreCat: /record/41958

Stolzenburg, Marc Patrick. Experimental Basis for an Orthotropic Failure Model for Application in Crash Simulation, 2019.https://doi.org/10.17619/UNIPB/1-572 .
LibreCat: /record/41960
DOI: 10.17619/UNIPB/1-572

Camberg, Alan Adam, Marius Striewe, Thomas Tröster, F. Bohner, and J. Tölle. “Investigation of Ductility and Fracture Behavior of EN AW-5182  at Non-Isothermal Forming Conditions.” In 5th MATFEM Conference. München: MATFEM, 2019.
LibreCat: /record/16027

Striewe, Jan André, Thomas Tröster, Jannik Kowatz, Gerson Meschut, Richard Grothe, and Guido Grundmeier. Analyse Und Optimierung Des Korrosions- Und Alterungsverhaltens von Hybriden Strukturen Aus Metallen Und CFK. Hannover: Europäische Forschungsgesellschaft für Blechverarbeitung, 2019.
LibreCat: /record/16795

Grothe, R., Jan André Striewe, Jannik Kowatz, Guido Grundmeier, Thomas Tröster, and Gerson Meschut. “Analyse und Optimierung des Korrosions- und Alterungsverhaltens von hybriden Strukturen aus Metallen und CFK,” 2019.
LibreCat: /record/16028

Camberg, Alan Adam, Thomas Tröster, Nikolay Sotirov, Jörn Tölle, and Friedrich Bohner. “Investigation of Ductility and Damage Characteristics of EN AW-5182  at Non-Isothermal Forming Conditions.” In Materials Science and Engineering (MSE) Congress 2018. Darmstadt, 2018.
LibreCat: /record/19868

Claes, Leander, Henning Zeipert, Peter Koppa, Thomas Tröster, and Bernd Henning. Additiv Gefertigte, Akustische Diffusor-Strukturen Für Ultraschallanwendungen. Workshop “Messtechnische Anwendungen von Ultraschall”, Drübeck, 2018.
LibreCat: /record/6594

Camberg, Alan Adam, Katja Engelkemeier, Jan Dietrich, and Thomas Heggemann. “Top-down Design of Tailored Fiber-Metal Laminates.”https://doi.org/10.1007/s41777-018-0004-1__Lightweight Design Worldwide 11, no. 2 (2018): 24–29.https://doi.org/10.1007/s41777-018-0004-1 .
LibreCat: /record/15876
DOI: 10.1007/s41777-018-0004-1

Weiß-Borkowski, Nathalie, Junhe Lian, Alan Adam Camberg, Thomas Tröster, Sebastian Münstermann, Wolfgang Bleck, Helmut Gese, and Helmut Richter. “Forming Limit Curves ofhttps://doi.org/10.1063/1.5035024__Determined in High-Speed Nakajima Tests and Predicted by Two Different Strain-Rate-Sensitive Models,”https://doi.org/10.1063/1.5035024__2018.https://doi.org/10.1063/1.5035024 .
LibreCat: /record/15960
DOI: 10.1063/1.5035024

Tasdemirci, Alper, Emine Fulya Akbulut Irmak, Erkan Guzel, Firat Tuzgel, Atacan Yucesoy, Selim Sahin, and Mustafa Guden. “Crushing Behavior and Energy Absorption Performance of a Bio-Inspired Metallic Structure: Experimental and Numerical Study.”https://doi.org/10.1016/j.tws.2018.07.051__Thin-Walled Structures, 2018, 547–55.https://doi.org/10.1016/j.tws.2018.07.051 .
LibreCat: /record/15977
DOI: 10.1016/j.tws.2018.07.051

Camberg, Alan Adam, and Thomas Tröster. “Optimization-Based Material Design of Tailored Stacked Hybrids for Further Improvement in Lightweight Car Body Structures.” In HYBRID - MATERIALS AND STRUCTURES 2018 - PROCEEDINGS. DGM - Deutsche Gesellschaft für Materialkunde e.V., 2018.
LibreCat: /record/16034

Ahlers, Dominik, and Thomas Tröster. “Entwicklung einer Prozessroute für die Luftfahrtindustrie mit erhöhter Aufbaurate im Laserstrahlschmelzprozess von Ti6Al4V,” 2018.
LibreCat: /record/16039

Wang, Z., and Thomas Tröster. “Influences of Interface on the Adhesion and Corrosion Properties of Steel-CFRP Hybrid Structures Manufactured by Vacuum Assisted Resin Transfer Moulding,” 2018.
LibreCat: /record/16040

Triebus, Marcel, Thomas Tröster, Alan Adam Camberg, S. Bienia, and K. Dröder. “Modelling the Interface of Hybrid Metal-FRP Components Joint by Form Closures.” In 15. Deutsches LS-Dyna Forum, 2018.
LibreCat: /record/16042

Camberg, Alan Adam, Thomas Tröster, A. Schneidt , N. Sotirov , and J. Tölle. “The Influence of Damage Accumulation on Failure Prediction: A Comparative Assessment of *MAT_224 and *MAT_024 + GISSMO for the Application in Non-Isothermal Sheet Metal Forming.” In 15. Deutsches LS-Dyna Forum, 2018.
LibreCat: /record/16043

Camberg, Alan Adam. “Top-down-Entwicklung von Faser-Metall-Laminaten auf Grundlage von Gesamtfahrzeugsimulationen.” Carbon Composites Magazin, no. 2 (2018): 15–16.
LibreCat: /record/16045

Schweizer, Swetlana, and Thomas Tröster. “Holz als Werkstoff im Automobil,” 2018.
LibreCat: /record/16056

Wang, Z., and Thomas Tröster. “Herstellung hybrider Strukturkomponenten in einem modifizierten VARTM-Prozess,” 2018.
LibreCat: /record/16057

Camberg, Alan Adam, F Bohner, J Tölle, A Schneidt, S Meiners, and Thomas Tröster. “Formability Enhancement of EN AW-5182https://doi.org/10.1088/1757-899x/418/1/012018__Aluminum Alloy Sheet Metal Parts in a Flash Forming Process: Testing, Calibration and Evaluation of Fracture Models.”https://doi.org/10.1088/1757-899x/418/1/012018__IOP Conference Series: Materials Science and Engineering, 2018.https://doi.org/10.1088/1757-899x/418/1/012018 .
LibreCat: /record/13439
DOI: 10.1088/1757-899x/418/1/012018

Schumacher, Christian, Volker Schöppner, and Stefan Gnaase. “Processing Short Fiber-Reinforced Polymers in the Fused Deposition Modeling Process.” In Proceedings of the 29th Annual InternationalSolid Freeform Fabrication Symposium – An Additive Manufacturing Conference, 2018.
LibreCat: /record/16118

Niewel, Jörg. Untersuchungen zur induktiven Erwärmung im Warmformprozess . Vol. 2018,31. Schriftenreihe Institut für Leichtbau mit Hybridsystemen. Shaker Verlag, 2018.
LibreCat: /record/37573

Horwath, Ilona, Silvia Dohmeier-Fischer, Nathalie Weiß-Borkowski, and Thomas Tröster. “FROM EMPOWERMENT TO INNOVATION: INTER- AND TRANSDISCIPLINARY RESEARCH METHODS IN LIGHTWEIGHT ENGINEERING.”https://doi.org/10.21125/inted.2018.1651__In INT Proceedings, 2018.https://doi.org/10.21125/inted.2018.1651 .
LibreCat: /record/16052
DOI: 10.21125/inted.2018.1651

Hengsbach, Florian, Peter Koppa, Martin Joachim Holzweissig, Mehmet Esat Aydinöz, Alexander Taube, Kay-Peter Hoyer, Oleksiy Starykov, et al. “Inline Additively Manufactured Functionally Graded Multi-Materials: Microstructural and Mechanical Characterization of 316L Parts withhttps://doi.org/10.1007/s40964-018-0044-4__Layers.”https://doi.org/10.1007/s40964-018-0044-4__Progress in Additive Manufacturing, 2018, 221–31.https://doi.org/10.1007/s40964-018-0044-4 .
LibreCat: /record/15957
DOI: 10.1007/s40964-018-0044-4

Ahlers, Dominik, Thomas Tröster, S. Hermann, P. Koppa, P. Gloetter, Mirko Schaper, M. Peters, M. Burns, F. Hengsbach, and A. Altmann. “Selective Laser Melting of Ti6Al4V with High Build Rates and Following Hot Isostatic Pressing.”https://doi.org/10.7449/2018mst/2018/mst_2018_117_124__In Contributed Papers from MS&;, 2018.https://doi.org/10.7449/2018mst/2018/mst_2018_117_124 .
LibreCat: /record/16048
DOI: 10.7449/2018mst/2018/mst_2018_117_124

Weiß-Borkowski, Nathalie, Ilona Horwath, A. Berscheid, Silvia Dohmeier-Fischer, and Thomas Tröster. “NEW APPROACHES IN LIGHTWEIGHT DESIGN: V-MODEL OF LIGHTWEIGHT DESIGN BY COMPOSITES AS AN APPROACH OF INTER- AND TRANSDISCIPLINARY RESEARCH.”https://doi.org/10.21125/inted.2018.1298__In INT Proceedings, 2018.https://doi.org/10.21125/inted.2018.1298 .
LibreCat: /record/16054
DOI: 10.21125/inted.2018.1298

Striewe, Jan André, R. Grothe, Jannik Kowatz, Thomas Tröster, Guido Grundmeier, and Gerson Meschut. “Design and Testing of Co-Cured Bonded CFRP-Steel Hybrids with Nanostructured Interfaces for Interlaminar Fracture Toughness,” 2018.
LibreCat: /record/16035

Camberg, Alan Adam, Thomas Tröster, Thomas Heggemann, H. Homberg, Mirko Schaper, J. Dietrich, Wolfgang Bremser, et al. “LHYBS – Lightweight Design by Novel Hybrid Materials,” 2018.
LibreCat: /record/16050

Zinn, C., Z. Wang, Thomas Tröster, and Mirko Schaper. “Forming and Corrosion Stability of a Laser Pre-Treated Metal Surface-Influence on the Properties of Metal-CFRP Hybrid Structures Made by VARTM,” 2018.
LibreCat: /record/16055

Hengsbach, Florian, Peter Koppa, Martin Joachim Holzweissig, Mehmet Esat Aydinöz, Alexander Taube, Kay-Peter Hoyer, Oleksiy Starykov, et al. “Inline Additively Manufactured Functionally Graded Multi-Materials: Microstructural and Mechanical Characterization of 316L Parts withhttps://doi.org/10.1007/s40964-018-0044-4__Layers.”https://doi.org/10.1007/s40964-018-0044-4__Progress in Additive Manufacturing, 2018, 221–31.https://doi.org/10.1007/s40964-018-0044-4 .
LibreCat: /record/24104
DOI: 10.1007/s40964-018-0044-4

Zinn, Carolin, Mathias Bobbert, Christian Dammann, Zheng Wang, Thomas Tröster, Rolf Mahnken, Gerson Meschut, and Mirko Schaper. “Shear Strength and Failure Behaviour of Laser Nano-Structured and Conventionally Pre-Treated Interfaces in Intrinsically Manufactured CFRP-Steel Hybrids.”https://doi.org/10.1016/j.compositesb.2018.05.030__Composites Part B: Engineering, 2018, 173–85.https://doi.org/10.1016/j.compositesb.2018.05.030 .
LibreCat: /record/15958
DOI: 10.1016/j.compositesb.2018.05.030

Claes, Leander, Henning Zeipert, Peter Koppa, Thomas Tröster, and Bernd Henning. “Additively Manufactured Acoustic Diffuser Structures for Ultrasonic Measurement Applications.”https://doi.org/10.1121/2.0000688__In Proceedings of Meetings on Acoustics, 030004. Honolulu, 2017.https://doi.org/10.1121/2.0000688 .
LibreCat: /record/6559
DOI: 10.1121/2.0000688

Dietrich, André, Bernard Nacke, Florian Pfeifer, Thorsten Marten, and Thomas Tröster. “Investigation of Geometrical Discontinuities in Blanks for Hot Sheet Metal Forming Process under the Influence of Induction Heating,” 2017.
LibreCat: /record/16791

Dietrich, André, Bernard Nacke, Florian Pfeifer, Thorsten Marten, and Thomas Tröster. “Effects of Holes in Blanks for Press Hardening Process Due to Induction Heating,” 2017.
LibreCat: /record/16792

Reuter, Corin, Kim-Henning Sauerland, and Thomas Tröster. “Experimental and Numerical Crushing Analysis of Circular CFRP Tubes under Axial Impact Loading.”https://doi.org/10.1016/j.compstruct.2017.04.052__Composite Structures, 2017, 33–44.https://doi.org/10.1016/j.compstruct.2017.04.052 .
LibreCat: /record/15941
DOI: 10.1016/j.compstruct.2017.04.052

Reuter, Corin, and Thomas Tröster. “Crashworthiness and Numerical Simulation of Hybrid Aluminium-CFRP Tubes under Axial Impact.”https://doi.org/10.1016/j.tws.2017.03.034__Thin-Walled Structures 117 (2017): 1–9.https://doi.org/10.1016/j.tws.2017.03.034 .
LibreCat: /record/15942
DOI: 10.1016/j.tws.2017.03.034

Striewe, Jan André, Corin Reuter, Kim-Henning Sauerland, and Thomas Tröster. “Manufacturing and Crashworthiness of Fabric-Reinforced Thermoplastic Composites.”https://doi.org/10.1016/j.tws.2017.11.011__Thin-Walled Structures, 2017, 501–8.https://doi.org/10.1016/j.tws.2017.11.011 .
LibreCat: /record/15944
DOI: 10.1016/j.tws.2017.11.011

Weiß-Borkowski, Nathalie, Juhne Lian, Thorsten Marten, Thomas Tröster, Sebastian Münstermann, and Wolfgang Bleck. “Forming Limit Curves Determined in High-Speed Nakajima Tests and Predicted by a Strain Rate Sensitive Model.”https://doi.org/10.1063/1.5007961__In Proceedings of The 20th International ESAFORM Conference on Material Forming: ESAFORM 2017, 2017.https://doi.org/10.1063/1.5007961 .
LibreCat: /record/16059
DOI: 10.1063/1.5007961

Schweizer, Swetlana, Anna Becker-Staines, and Thomas Tröster. “Separation of Hybrid Structures for the Reclaim of Their Single Components.”https://doi.org/10.4028/www.scientific.net/kem.742.568__Key Engineering Materials, 2017, 568–75.https://doi.org/10.4028/www.scientific.net/kem.742.568 .
LibreCat: /record/16062
DOI: 10.4028/www.scientific.net/kem.742.568

Ahlers, Dominik, and Thomas Tröster. “Approve of Porostiy for Increasing Process Speed in the Laser Melting Process of Ti6Al4V,” 2017.
LibreCat: /record/16063

Kutz, P., Z. Wang, M. Ellouz, T. Kordisch, and Thomas Tröster. “Computed Tomography Examination of Hybrid Components after Dynamic 3-Point Bending Test,” 2017.
LibreCat: /record/16065

Weiß Borkowski, Nathalie . Analyse des Verformungsverhaltens von Übergangszonen partiell pressgehärteter Strukturen. Shaker Verlag Band 2017/22, 2017.
LibreCat: /record/16070

Wang, Z., P. Kutz, and Thomas Tröster. “Herstellung und computertomographische Untersuchung von hybriden Strukturen aus Metall und Faserverbundkunststoffen,” 2017.
LibreCat: /record/16071

Weiß Borkowski, N., Alan Adam Camberg, Thomas Tröster, and Thorsten Marten. “Influence of Strain Rate on the Instability in High Speed Cupping Tests – Investigation on Dual Phase Steel and Numerical Validation by CRACH,” 2017.
LibreCat: /record/16072

Weiß Borkowski, N., Thorsten Marten, Thomas Tröster, and A. Schulz Beenken. “Analysis of the Forming Behaviour of Transition Areas of Partial Press-Hardened Steel at High Strain-Rates,” 2017.
LibreCat: /record/16073

Ahlers, Dominik, and Thomas Tröster. “Materialkombinationen in der additive Fertigung,” 2017.
LibreCat: /record/16074

Ahlers, Dominik, and Thomas Tröster. “Aspekte der Produktentwicklung in der additiven Fertigung,” 2017.
LibreCat: /record/16075

Frantz, Meike Maria. Analyse und Optimierung der Delta-Alpha-Problematik im Fertigungsprozess von asymmetrischen hybriden Werkstoffen aus Metall und faserverstärkten Kunststoffen. Vol. 2017,25. Schriftenreihe Institut für Leichtbau mit Hybridsystemen. Shaker Verlag, 2017.
LibreCat: /record/37564

Ahlers, Dominik, Peter Koppa, F. Hengsbach, P. Gloetter, A. Altmann, Mirko Schaper, and Thomas Tröster. “Increasing Process Speed in the Laser Melting Process of Ti6Al4V and the Reduction of Pores during Hot Isostatic Pressing.” In Proceedings of the 28th Annual InternationalSolid Freeform Fabrication Symposium – An Additive Manufacturing Conference, 2017.
LibreCat: /record/16066

Hengsbach, Florian, Peter Koppa, Kristina Duschik, Martin Joachim Holzweissig, Madison Burns, Jens Nellesen, Wolfgang Tillmann, Thomas Tröster, Kay-Peter Hoyer, and Mirko Schaper. “Duplex Stainless Steel Fabricated by Selective Laser Melting - Microstructural and Mechanical Properties.”https://doi.org/10.1016/j.matdes.2017.07.046__Materials &; Design, 2017, 136–42.https://doi.org/10.1016/j.matdes.2017.07.046 .
LibreCat: /record/24108
DOI: 10.1016/j.matdes.2017.07.046

Weidenmann, Kay André, Florentin Pottmeyer, Zheng Wang, Thomas Tröster, Dieter Meiners, Carolin Zinn, Mirko Schaper, and Jonathan Serna Gonzalez. “Shear Edge Tests: A Benchmark in Investigating the Influence of Different Surface Pretreatment Methods on the Shear Stress of Intrinsically Manufactured Metal-CFRP Hybrids.”https://doi.org/10.1504/ijautoc.2016.10005303__International Journal of Automotive Composites, 2017.https://doi.org/10.1504/ijautoc.2016.10005303 .
LibreCat: /record/15961
DOI: 10.1504/ijautoc.2016.10005303

Marten, Thorsten. Erweiterung des Portfolios presshärtbarer Stähle durch gezielte Werkstoff- und Prozessmodifikationen. Shaker Verlag, 2017.
LibreCat: /record/16068

Leuders, Stefan. Einfluss prozess-induzierter Defekte auf die Ermüdungseigenschaften metallischer Werkstoffe verarbeitet mittels Laserstrahlschmelzen. Vol. 5. Forschungsberichte des Direct Manufacturing Research Centers. Düren: Düren Verlag GmbH, 2016.
LibreCat: /record/24897

Tröster, Thomas, Alan Adam Camberg, Bamned Sanitther, Zheng Wang, and Christian Lauter. “Manufacturing and Investigation of Steel-CFRP Hybrid Pillar Structures for Automotive Applications by Intrinsic Resin Transfer Moulding Technology.”https://doi.org/10.1504/ijautoc.2016.10005304__International Journal of Automotive Composites 2 (2016): 229–43.https://doi.org/10.1504/ijautoc.2016.10005304 .
LibreCat: /record/15962
DOI: 10.1504/ijautoc.2016.10005304

Tasdemirci, Alper, Firat Tüzgel, Erkan Güzel, Emine Fulya Akbulut Irmak, and Mustafa Güden. “The Investigation of the Dynamic Deformation Behaviour of a 304L Steel Plate with Direct-Pressure Pulse Experiments.” The British Society for Strain Measurement, 2016.
LibreCat: /record/15978

Schweizer, Swetlana, and Thomas Tröster. “Recyclingkonzepte für hybride Strukturen.” Carbon Composites Magazin, no. 2 (2016): 23.
LibreCat: /record/16139

Wang, Zheng, Matthias Riemer, Simon Frederik Koch, Daniel Barfuss, Raik Grützner, Florian Augenthaler, and Jan Schwennen. “Intrinsic Hybrid Composites for Lightweight Structures: Tooling Technologies.”https://doi.org/10.4028/www.scientific.net/amr.1140.247__Advanced Materials Research, 2016, 247–54.https://doi.org/10.4028/www.scientific.net/amr.1140.247 .
LibreCat: /record/16142
DOI: 10.4028/www.scientific.net/amr.1140.247

Koch, Simon Frederik, Daniel Barfuss, Mathias Bobbert, Lukas Groß, Raik Grützner, Matthias Riemer, Daniel Stefaniak, and Zheng Wang. “Intrinsic Hybrid Composites for Lightweight Structures: New Process Chain Approaches.”https://doi.org/10.4028/www.scientific.net/amr.1140.239__Advanced Materials Research, 2016, 239–46.https://doi.org/10.4028/www.scientific.net/amr.1140.239 .
LibreCat: /record/16144
DOI: 10.4028/www.scientific.net/amr.1140.239

Reuter, C. Versagensverhalten und Energieabsorptionssimulation von Faser-Kunststoff-Verbunden und Aluminium-FKV-Hybridwerkstoffen. Shaker Verlag Band 20/2016, 2016.
LibreCat: /record/16145

Grienitz, Volker, Thomas Tröster, and Stefan Meiners. “Technikevaluation für die generative Fertigung eines Serien-Radträgers.”https://doi.org/10.1007/s35148-016-0090-5__ATZ - Automobiltechnische Zeitschrift, 2016, 36–41.https://doi.org/10.1007/s35148-016-0090-5 .
LibreCat: /record/16146
DOI: 10.1007/s35148-016-0090-5

Wang, Z., and Thomas Tröster. “Parameterstudien an intrinsisch hergestellten Metall-FVK-Hybridstrukturen mittels RTM-Verfahren,” 2016.
LibreCat: /record/16264

Striewe, Jan André, C. Reuter, C. Oberkönig, C. Lauter, and Thomas Tröster. “Experimentelle Untersuchung und Analyse des Energieabsorptionsverhaltens axial belasteter Faserverbundkunststoffe,” 2016.
LibreCat: /record/16266