Ahlers, D. (2020). Parameter- und Prozessoptimierung für den additiven Fertigungsprozess im Pulverbett am Beispiel der Legierung Ti6Al4V  (Vol. 19). Shaker.

Hielscher, C., Grenz, J., Camberg, A. A., &; Wingenbach, N. (2020). Ansatz zur effizienteren Auslegung von Hybridbauteilen. ATZ - Automobiltechnische Zeitschrift, 60–65.https://doi.org/10.1007/s35148-020-0284-8 

Hielscher, C., Grenz, J., Camberg, A. A., &; Wingenbach, N. (2020). Approach to More Efficient Design of Hybrid Components. ATZ Worldwide, 58–61.https://doi.org/10.1007/s38311-020-0267-0 

Wu, T., Tinkloh, S. R., Tröster, T., &; Zinn, W. (2020). Residual stress measurement in GFRP/steel hybrid components. In Proceedings of the 4th International Conference Hybrid 2020 Materials and Structures. Web-Conference, Germany.

Camberg, A. A., &; Tröster, T. (2020). A simplified method for the evaluation of the layer compression test using one 3D digital image correlation system and considering the material anisotropy by the equibiaxial Lankford parameter. Presented at the International Deep-Drawing Research Group (IDDRG 2020), Seoul, South Korea.https://doi.org/10.1088/1757-899X/967/1/012077 

Camberg, A. A., Erhart, T., &; Tröster, T. (2020). Predicting fracture at non-isothermal forming conditions: A temperature dependent extension of the LS-DYNA GISSMO fracture indicator framework. Presented at the International Deep-Drawing Research Group (IDDRG 2020) , Seoul, South Korea.https://doi.org/10.13140/RG.2.2.23924.17288 

Schweizer, S., Akbulut Irmak, E. F., &; Tröster, T. (2020). Wood-based materials as a sustainable alternative for future car body construction. Future Materials, vitual.

Triebus, M., &; Tröster, T. (2020). A Holistic Approach to Optimization-Based Design of Hybrid Materials. In Proceedings 4th International Conference Hybrid Materials &; Structures. Web-Conference.

Claes, L., Baumhögger, E., Rüther, T., Gierse, J., Tröster, T., &; Henning, B. (2020). Reduction of systematic measurement deviation in acoustic absorption measurement systems. Fortschritte Der Akustik - DAGA 2020, 1077–1080.

Tinkloh, S. R., Wu, T., Tröster, T., &; Niendorf, T. (2020). Numerical investigation of the hole-drilling method applied to intrinsic manufactured metal-CFRP hybrids. Proceedings of the 4th International Conference Hybrid 2020 Materials and Structures. 4th International Conference Hybrid 2020 Materials and Structures, Web-Conference, Germany.

Wu, T., Tinkloh, S. R., Tröster, T., Zinn, W., &; Niendorf, T. (2020). Determination and Validation of Residual Stresses in CFRP/Metal Hybrid Components Using the Incremental Hole Drilling Method. Journal of Composites Science, Article 143.https://doi.org/10.3390/jcs4030143 

Huxol, A. (2020). Beitrag zur Qualitätssicherung in der additiven Fertigung individueller Produkte aus CoCr-Legierungen: Vol. 2020,42. Shaker Verlag.

Tinkloh, S. R., Wu, T., Tröster, T., &; Niendorf, T. (2020). A micromechanical-based finite element simulation of process-induced residual stresses in metal-CFRP-hybrid structures. Composite Structures, 238, Article 111926.https://doi.org/10.1016/j.compstruct.2020.111926 

Chalicheemalapalli Jayasankar, D., Stallmeister, T., Wang, Z., &; Tröster, T. (2020). MANUFACTURING OF HYBRID COMPONENTS BY VARTM-PROCESS USING NEW SEALING TECHNIQUE DEVELOPED. In J. M. Hausmann, M. Siebert, A. von Hehl, &; K. A. Weidenmann (Eds.), Hybrid 2020 Materials and Structures (pp. 167–172).

Ahlers, D., &; Tröster, T. (2019). Schlussbericht zum Vorhaben “Additive Leichtbaustrukturen für Flugzeugkomponenten”f: Verbund: KOBFS - Kostenoptimierter Baukasten für Flügelsysteme. TIB: Universität Paderborn.https://doi.org/10.2314/KXP:1695591887 

Pfeifer, F., Dietrich, A., Marten, T., Tröster, T., &; Nacke, B. (2019). Investigation on Inductive Heating of Sheet Metal for an Industrial Hot Stamping Process. In Proceedings of 7th International Conference on Hot Sheet Metal Forming of High-Performance Steel (pp. 585–593). Luleå.

Striewe, J. A., Thomas, R., Fischer, F., Wiens, T., &; Tröster, T. (2019). Energieabsorptions- und Versagensverhalten eines automobilen Seitenschwellers mit lokaler Verstärkung aus kohlenstofffaserverstärktem Kunststoff nach Alterung. Presented at the Tagung Werkstoffprüfung 2019, Sankt Augustin: DGM-Inventum GmbH .

Ahlers, D., &; Tröster, T. (2019). Performance Parameters and HIP Routes for additively manufactured titanium alloy Ti6Al4V. Maastricht: EuroPM.

Camberg, A. A., &; Hielscher, C. (2019). A holistic approach to the lightweight design of tailored structural components using the example of a hybrid A-pillar. In Aachen Body Engineering Days 2019. Aachen.

Camberg, A. A., &; Tröster, T. (2019). Challenges in fracture modeling under non-isothermal forming conditions using the example of a new forming process for aluminum blanks. In 26. Sächsische Fachtagung Umformtechnik. Dresden.

Tinkloh, S. R., Wu, T., Tröster, T., &; Niendorf, T. (2019). A micromechanical based finite element simulation of process induced residual stresses in metal-CFRP-hybrid structures. Presented at the 22nd International Conference on Composite Structures (ICC) and 1st Chinese Conference on Composite Structures (CCC), Wuhan.

Camberg, A. A., Tröster, T., Bohner, F., &; Tölle, J. (2019). Predicting plasticity and fracture of severe pre-strained EN AW-5182 by Yld2000 yield locus and Hosford-Coulomb fracture model in sheet forming applications. IOP Conference Series: Materials Science and Engineering, 651, 012057.https://doi.org/10.1088/1757-899X/651/1/012057 

Akbulut Irmak, E. F., &; Tröster, T. (2019). Fracture prediction of additively manufactured AlSi10Mg materials. Procedia Structural Integrity, 190–197.https://doi.org/10.1016/j.prostr.2019.12.101 

Akbulut Irmak, E. F., Hanses, J., Schweizer, S., &; Tröster, T. (2019). Modeling the Energy Absorption Characteristics of Wood Crash Elements. 12th European LS-DYNA Conference, Koblenz.

Marten, T., &; Tröster, T. (2019). Einsatz neuartiger Stähle und Generierung gradierter Leichtbaustrukturen im Presshärteprozess. Düsseldorf: Forschungsvereinigung Stahlanwendung e.V. im Stahl Zentrum, 0, Verlag und Vertriebsgesellschaft mbH.

Triebus, M., Bienia, S., Marten, T., Tröster, T., &; Dröder, K. (2019). Press Hardening Integrated Structuring for Hybrid Components. Presented at the 7th International Conference on Hot Sheet Metal Forming of High-Performance Steel, Lulea, Sweden: Verlag Wissenschaftliche Scripten.

Camberg, A. A., Stratmann, I., &; Tröster, T. (2019). TAILORED STACKED HYBRIDS – AN OPTIMIZATION-BASED APPROACH IN MATERIAL DESIGN FOR FURTHER IMPROVEMENT IN LIGHTWEIGHT CAR BODY STRUCTURES. In Technologies for economical and functional lightweight design. Berlin, Heidelberg.https://doi.org/10.1007/978-3-662-58206-0_12 

Stallmeister, T., Chalicheemalapalli Jayasankar, D., Wang, Z., &; Tröster, T. (2019). Self-sealing tool concept for RTM-processes. 22nd International Conference on Composite Materials (ICCM22 2019), Melbourne .

Stallmeister, T., Chalicheemalapalli Jayasankar, D., Wang, Z., &; Tröster, T. (2019). Selbstabdichtendes Werkzeugkonzept für RTM-Prozesse. Tagung Werkstoffprüfung 2019, Neu-Ulm.

Opdemom, H. (2019). Experimentelle Untersuchung einse modifzierten Nasspressverfahrens für die Herstellung von hybriden Metall-Faserverbundkunststoff-Bauteilen: Vol. 2019,35. Shaker Verlag.

Stolzenburg, M. P. (2019). Experimental Basis for an Orthotropic Failure Model for Application in Crash Simulation.https://doi.org/10.17619/UNIPB/1-572 

Camberg, A. A., Striewe, M., Tröster, T., Bohner, F., &; Tölle, J. (2019). Investigation of ductility and fracture behavior of EN AW-5182  at non-isothermal forming conditions. 5th MATFEM Conference. 5th MATFEM Conference, Schloss Hohenkammer.

Striewe, J. A., Tröster, T., Kowatz, J., Meschut, G., Grothe, R., &; Grundmeier, G. (2019). Analyse und Optimierung des Korrosions- und Alterungsverhaltens von hybriden Strukturen aus Metallen und CFK. Europäische Forschungsgesellschaft für Blechverarbeitung.

Grothe, R., Striewe, J. A., Kowatz, J., Grundmeier, G., Tröster, T., &; Meschut, G. (2019). Analyse und Optimierung des Korrosions- und Alterungsverhaltens von hybriden Strukturen aus Metallen und CFK. 39. EFB-Kolloquium, Bad Boll .

Camberg, A. A., Tröster, T., Sotirov, N., Tölle, J., &; Bohner, F. (2018). Investigation of ductility and damage characteristics of EN AW-5182  at non-isothermal forming conditions. In Materials Science and Engineering (MSE) Congress 2018. Darmstadt.

Claes, L., Zeipert, H., Koppa, P., Tröster, T., &; Henning, B. (2018). Additiv gefertigte, akustische Diffusor-Strukturen für Ultraschallanwendungen. Workshop “Messtechnische Anwendungen von Ultraschall”, Drübeck.

Camberg, A. A., Engelkemeier, K., Dietrich, J., &; Heggemann, T. (2018). Top-down design of tailored fiber-metal laminates. Lightweight Design Worldwide, 11(2), 24–29.https://doi.org/10.1007/s41777-018-0004-1 

Weiß-Borkowski, N., Lian, J., Camberg, A. A., Tröster, T., Münstermann, S., Bleck, W.,https://doi.org/10.1063/1.5035024__Richter, H. (2018). Forming limit curves ofhttps://doi.org/10.1063/1.5035024__determined in high-speed Nakajima tests and predicted by two different strain-rate-sensitive models.https://doi.org/10.1063/1.5035024 

Tasdemirci, A., Akbulut Irmak, E. F., Guzel, E., Tuzgel, F., Yucesoy, A., Sahin, S., &; Guden, M. (2018). Crushing behavior and energy absorption performance of a bio-inspired metallic structure: Experimental and numerical study. Thin-Walled Structures, 547–555.https://doi.org/10.1016/j.tws.2018.07.051 

Camberg, A. A., &; Tröster, T. (2018). Optimization-based material design of tailored stacked hybrids for further improvement in lightweight car body structures. In HYBRID - MATERIALS AND STRUCTURES 2018 - PROCEEDINGS. Bremen: DGM - Deutsche Gesellschaft für Materialkunde e.V.

Ahlers, D., &; Tröster, T. (2018). Entwicklung einer Prozessroute für die Luftfahrtindustrie mit erhöhter Aufbaurate im Laserstrahlschmelzprozess von Ti6Al4V. Presented at the Rapid.Tech 2018 – Fachforum Luftfahrt, Erfurt.

Wang, Z., &; Tröster, T. (2018). Influences of interface on the adhesion and corrosion properties of steel-CFRP hybrid structures manufactured by vacuum assisted resin transfer moulding. Presented at the 21th International Conference on Composite Structures (ICC), Bologna, Italy.

Triebus, M., Tröster, T., Camberg, A. A., Bienia, S., &; Dröder, K. (2018). Modelling the Interface of Hybrid Metal-FRP Components Joint by Form Closures. In 15. Deutsches LS-Dyna Forum. Bamberg.

Camberg, A. A., Tröster, T., Schneidt , A., Sotirov , N., &; Tölle, J. (2018). The influence of damage accumulation on failure prediction: a comparative assessment of *MAT_224 and *MAT_024 + GISSMO for the application in non-isothermal sheet metal forming. In 15. Deutsches LS-Dyna Forum. Bamberg.

Camberg, A. A. (2018). Top-down-Entwicklung von Faser-Metall-Laminaten auf Grundlage von Gesamtfahrzeugsimulationen. Carbon Composites Magazin, (2), 15–16.

Schweizer, S., &; Tröster, T. (2018). Holz als Werkstoff im Automobil. 2. Siegener Leichtbaukolloquium, Siegen.

Wang, Z., &; Tröster, T. (2018). Herstellung hybrider Strukturkomponenten in einem modifizierten VARTM-Prozess. Presented at the 2. Siegener Leichtbaukolloquium, Siegen.

Camberg, A. A., Bohner, F., Tölle, J., Schneidt, A., Meiners, S., &; Tröster, T. (2018). Formability enhancement of EN AW-5182https://doi.org/10.1088/1757-899x/418/1/012018__aluminum alloy sheet metal parts in a flash forming process: testing, calibration and evaluation of fracture models. IOP Conference Series: Materials Science and Engineering.https://doi.org/10.1088/1757-899x/418/1/012018 

Schumacher, C., Schöppner, V., &; Gnaase, S. (2018). Processing Short Fiber-reinforced Polymers in the Fused Deposition Modeling Process. Proceedings of the 29th Annual InternationalSolid Freeform Fabrication Symposium – An Additive Manufacturing Conference. Solid Freeform Fabrication.

Niewel, J. (2018). Untersuchungen zur induktiven Erwärmung im Warmformprozess : Vol. 2018,31. Shaker Verlag.

Horwath, I., Dohmeier-Fischer, S., Weiß-Borkowski, N., &; Tröster, T. (2018). FROM EMPOWERMENT TO INNOVATION: INTER- AND TRANSDISCIPLINARY RESEARCH METHODS IN LIGHTWEIGHT ENGINEERING. INT Proceedings. 12th International Technology, Education and Development Conference, Valencia.https://doi.org/10.21125/inted.2018.1651 

Hengsbach, F., Koppa, P., Holzweissig, M. J., Aydinöz, M. E., Taube, A., Hoyer, K.-P., Starykov, O., Tonn, B., Niendorf, T., Tröster, T., &; Schaper, M. (2018). Inline additively manufactured functionally graded multi-materials: microstructural and mechanical characterization of 316L parts withhttps://doi.org/10.1007/s40964-018-0044-4__layers. Progress in Additive Manufacturing, 221–231.https://doi.org/10.1007/s40964-018-0044-4 

Ahlers, D., Tröster, T., Hermann, S., Koppa, P., Gloetter, P., Schaper, M., Peters, M., Burns, M., Hengsbach, F., &; Altmann, A. (2018). Selective Laser Melting of Ti6Al4V with High Build Rates and Following Hot Isostatic Pressing. Contributed Papers from MS&;.https://doi.org/10.7449/2018mst/2018/mst_2018_117_124 

Weiß-Borkowski, N., Horwath, I., Berscheid, A., Dohmeier-Fischer, S., &; Tröster, T. (2018). NEW APPROACHES IN LIGHTWEIGHT DESIGN: V-MODEL OF LIGHTWEIGHT DESIGN BY COMPOSITES AS AN APPROACH OF INTER- AND TRANSDISCIPLINARY RESEARCH. INT Proceedings.https://doi.org/10.21125/inted.2018.1298 

Striewe, J. A., Grothe, R., Kowatz, J., Tröster, T., Grundmeier, G., &; Meschut, G. (2018). Design and Testing of Co-Cured Bonded CFRP-Steel Hybrids with Nanostructured Interfaces for Interlaminar Fracture Toughness. 18th European Conference on Composite Materials, Athen.

Camberg, A. A., Tröster, T., Heggemann, T., Homberg, H., Schaper, M., Dietrich, J., Bremser, W., Achterberg, L., Kabst, M., Wille, M., &; Peckhaus, V. (2018). LHYBS – Lightweight Design by Novel Hybrid Materials. 8th NRW Nano Conference, Innovations in Materials and Applications, Dortmund.

Zinn, C., Wang, Z., Tröster, T., &; Schaper, M. (2018). Forming and corrosion stability of a laser pre-treated metal surface-influence on the properties of metal-CFRP hybrid structures made by VARTM. 3rd Int Conf on Hybrid Materials and Structures, Bremen.

Hengsbach, F., Koppa, P., Holzweissig, M. J., Aydinöz, M. E., Taube, A., Hoyer, K.-P., Starykov, O., Tonn, B., Niendorf, T., Tröster, T., &; Schaper, M. (2018). Inline additively manufactured functionally graded multi-materials: microstructural and mechanical characterization of 316L parts withhttps://doi.org/10.1007/s40964-018-0044-4__layers. Progress in Additive Manufacturing, 221–231.https://doi.org/10.1007/s40964-018-0044-4 

Zinn, C., Bobbert, M., Dammann, C., Wang, Z., Tröster, T., Mahnken, R., Meschut, G., &; Schaper, M. (2018). Shear strength and failure behaviour of laser nano-structured and conventionally pre-treated interfaces in intrinsically manufactured CFRP-steel hybrids. Composites Part B: Engineering, 173–185.https://doi.org/10.1016/j.compositesb.2018.05.030 

Claes, L., Zeipert, H., Koppa, P., Tröster, T., &; Henning, B. (2017). Additively manufactured acoustic diffuser structures for ultrasonic measurement applications. In Proceedings of Meetings on Acoustics (p. 030004). Honolulu.https://doi.org/10.1121/2.0000688 

Dietrich, A., Nacke, B., Pfeifer, F., Marten, T., &; Tröster, T. (2017). Investigation of geometrical discontinuities in blanks for hot sheet metal forming process under the influence of induction heating. Presented at the 5th International Conference on Steels in Cars and Trucks, Noordwijkerhout/Amsterdam.

Dietrich, A., Nacke, B., Pfeifer, F., Marten, T., &; Tröster, T. (2017). Effects of Holes in Blanks for Press Hardening Process due to Induction Heating. Presented at the XVIII International UIE-Congress Electrotechnologies for Material Processing, Hannover.

Reuter, C., Sauerland, K.-H., &; Tröster, T. (2017). Experimental and numerical crushing analysis of circular CFRP tubes under axial impact loading. Composite Structures, 33–44.https://doi.org/10.1016/j.compstruct.2017.04.052 

Reuter, C., &; Tröster, T. (2017). Crashworthiness and numerical simulation of hybrid aluminium-CFRP tubes under axial impact. Thin-Walled Structures, 117, 1–9.https://doi.org/10.1016/j.tws.2017.03.034 

Striewe, J. A., Reuter, C., Sauerland, K.-H., &; Tröster, T. (2017). Manufacturing and crashworthiness of fabric-reinforced thermoplastic composites. Thin-Walled Structures, 501–508.https://doi.org/10.1016/j.tws.2017.11.011 

Weiß-Borkowski, N., Lian, J., Marten, T., Tröster, T., Münstermann, S., &; Bleck, W. (2017). Forming limit curves determined in high-speed Nakajima tests and predicted by a strain rate sensitive model. In Proceedings of The 20th International ESAFORM Conference on Material Forming: ESAFORM 2017.https://doi.org/10.1063/1.5007961 

Schweizer, S., Becker-Staines, A., &; Tröster, T. (2017). Separation of Hybrid Structures for the Reclaim of their Single Components. Key Engineering Materials, 568–575.https://doi.org/10.4028/www.scientific.net/kem.742.568 

Ahlers, D., &; Tröster, T. (2017). Approve of porostiy for increasing process speed in the laser melting process of Ti6Al4V. Presented at the 28th Annual International Solid Freeform Fabrication Symposium 2017, Austin, Texas, USA.

Kutz, P., Wang, Z., Ellouz, M., Kordisch, T., &; Tröster, T. (2017). Computed Tomography Examination of Hybrid Components after Dynamic 3-Point Bending Test. Presented at the 2nd Conference &; Exhibition on Light Materials, Bremen.

Weiß Borkowski, N. (2017). Analyse des Verformungsverhaltens von Übergangszonen partiell pressgehärteter Strukturen. Shaker Verlag Band 2017/22.

Wang, Z., Kutz, P., &; Tröster, T. (2017). Herstellung und computertomographische Untersuchung von hybriden Strukturen aus Metall und Faserverbundkunststoffen. Presented at the 15. Bielefelder Werkstofftag, Bielefeld.

Weiß Borkowski, N., Camberg, A. A., Tröster, T., &; Marten, T. (2017). Influence of strain rate on the instability in high speed cupping tests – Investigation on dual phase steel and numerical validation by CRACH. Presented at the 4th MATFEM Conference, Schloss Hohenkammer.

Weiß Borkowski, N., Marten, T., Tröster, T., &; Schulz Beenken, A. (2017). Analysis of the Forming Behaviour of Transition Areas of Partial Press-Hardened Steel at High Strain-Rates. Presented at the 6th International Conference on Hot Sheet Metal Forming of High-Performance Steel (CH 2017), Atlanta, USA.

Ahlers, D., &; Tröster, T. (2017). Materialkombinationen in der additive Fertigung. Presented at the Rapid.Tech 2017 – Fachforum Luftfahrt, Erfurt.

Ahlers, D., &; Tröster, T. (2017). Aspekte der Produktentwicklung in der additiven Fertigung. Presented at the Technikforum: Design, Konstruktion, 3D Druck: Der Weg zum fertigen Bauteil, Nördlingen.

Frantz, M. M. (2017). Analyse und Optimierung der Delta-Alpha-Problematik im Fertigungsprozess von asymmetrischen hybriden Werkstoffen aus Metall und faserverstärkten Kunststoffen: Vol. 2017,25. Shaker Verlag.

Ahlers, D., Koppa, P., Hengsbach, F., Gloetter, P., Altmann, A., Schaper, M., &; Tröster, T. (2017). Increasing process speed in the laser melting process of Ti6Al4V and the reduction of pores during hot isostatic pressing. Proceedings of the 28th Annual InternationalSolid Freeform Fabrication Symposium – An Additive Manufacturing Conference. 28th Annual International Solid Freeform Fabrication Symposium 2017, Austin, Texas, USA.

Hengsbach, F., Koppa, P., Duschik, K., Holzweissig, M. J., Burns, M., Nellesen, J., Tillmann, W., Tröster, T., Hoyer, K.-P., &; Schaper, M. (2017). Duplex stainless steel fabricated by selective laser melting - Microstructural and mechanical properties. Materials &; Design, 136–142.https://doi.org/10.1016/j.matdes.2017.07.046 

Weidenmann, K. A., Pottmeyer, F., Wang, Z., Tröster, T., Meiners, D., Zinn, C., Schaper, M., &; Gonzalez, J. S. (2017). Shear edge tests: a benchmark in investigating the influence of different surface pretreatment methods on the shear stress of intrinsically manufactured metal-CFRP hybrids. International Journal of Automotive Composites, Article 244.https://doi.org/10.1504/ijautoc.2016.10005303 

Marten, T. (2017). Erweiterung des Portfolios presshärtbarer Stähle durch gezielte Werkstoff- und Prozessmodifikationen. Shaker Verlag.

Leuders, S. (2016). Einfluss prozess-induzierter Defekte auf die Ermüdungseigenschaften metallischer Werkstoffe verarbeitet mittels Laserstrahlschmelzen (Vol. 5). Düren Verlag GmbH.

Tröster, T., Camberg, A. A., Sanitther, B., Wang, Z., &; Lauter, C. (2016). Manufacturing and investigation of steel-CFRP hybrid pillar structures for automotive applications by intrinsic resin transfer moulding technology. International Journal of Automotive Composites, 2, 229–243.https://doi.org/10.1504/ijautoc.2016.10005304 

Tasdemirci, A., Tüzgel, F., Güzel, E., Akbulut Irmak, E. F., &; Güden, M. (2016). The Investigation of the Dynamic Deformation Behaviour of a 304L Steel Plate with Direct-Pressure Pulse Experiments. Presented at the 11th International Conference on Advances in Experimental Mechanics, Exeter, London: The British Society for Strain Measurement.

Schweizer, S., &; Tröster, T. (2016). Recyclingkonzepte für hybride Strukturen. Carbon Composites Magazin, (2), 23.

Wang, Z., Riemer, M., Koch, S. F., Barfuss, D., Grützner, R., Augenthaler, F., &; Schwennen, J. (2016). Intrinsic Hybrid Composites for Lightweight Structures: Tooling Technologies. Advanced Materials Research, 247–254.https://doi.org/10.4028/www.scientific.net/amr.1140.247 

Koch, S. F., Barfuss, D., Bobbert, M., Groß, L., Grützner, R., Riemer, M.,https://doi.org/10.4028/www.scientific.net/amr.1140.239__Wang, Z. (2016). Intrinsic Hybrid Composites for Lightweight Structures: New Process Chain Approaches. Advanced Materials Research, 239–246.https://doi.org/10.4028/www.scientific.net/amr.1140.239 

Reuter, C. (2016). Versagensverhalten und Energieabsorptionssimulation von Faser-Kunststoff-Verbunden und Aluminium-FKV-Hybridwerkstoffen.

Grienitz, V., Tröster, T., &; Meiners, S. (2016). Technikevaluation für die generative Fertigung eines Serien-Radträgers. ATZ - Automobiltechnische Zeitschrift, 36–41.https://doi.org/10.1007/s35148-016-0090-5 

Wang, Z., &; Tröster, T. (2016). Parameterstudien an intrinsisch hergestellten Metall-FVK-Hybridstrukturen mittels RTM-Verfahren. Presented at the EuroHybrid, Kaiserslautern.

Striewe, J. A., Reuter, C., Oberkönig, C., Lauter, C., &; Tröster, T. (2016). Experimentelle Untersuchung und Analyse des Energieabsorptionsverhaltens axial belasteter Faserverbundkunststoffe. Presented at the Polymerte, Merseburg.

Striewe, J. A., Lauter, C., Reuter, C., &; Tröster, T. (2016). Manufacturing and Crashworthiness of Fabric Reinforced Thermoplastic Composites. Presented at the 19th International Conference on Composite Structures, Porto.

Striewe, J. A., Reuter, C., Lauter, C., &; Tröster, T. (2016). Innovative largescale Production Process for multilayered Sheet-Metal-FRP-Structures. Presented at the 19th International Conference on Composite Structures, Porto.

Wang, Z., Lauter, C., Löseke, J., &; Tröster, T. (2016). CarS: Carbon Fiber Reinforced Steel for Structural Automotive Applications. Presented at the International Conference on Automotive Composites, ICAutoC 2016, Lisbon, Portugal.

Hickmann, T., Ahlers, D., &; Tröster, T. (2016). Neue Prototypen-Werkzeugtechnologie für Bipolarplatten und Batteriekomponenten. Der Stahlformenbauer , (5).

Siewers, B. (2016). Einsatz der Widerstandserwärmung bei hydraulischen Schneidgeräten zum Trennen von hochfesten Stahlwerkstoffen in Kraftfahrzeugen: Vol. 2016,21. Shaker Verlag.

Tröster, T., Schaper, M., Meschut, G., Mahnken, R., Bobbert, M., Lauter, C., Zinn, C., Wang, Z., &; Dammann, C. (2016). Influences of interface and surface pretreatment on the mechanical properties of metal-CFRP hybrid structures manufactured by resin transfer moulding. International Journal of Automotive Composites, 2, 272–298.https://doi.org/10.1504/ijautoc.2016.10005305 

Bobbert, M., Dammann, C., Wang, Z., Zinn, C., Mahnken, R., Schaper, M., &; Tröster, T. (2016). Intrinsische Herstellung hybrider Strukturkomponenten in einen modifizierte RTM-Prozess. Faszination hybrider Leichtbau 2016, Wolfsburg.

Zinn, C., Bobbert, M., Dammann, C., Wang, Z., Schaper, M., Meschut, G., Mahnken, R., &; Tröster, T. (2016). Laserbehandlung intrinsisch gefertigter Hybride - strukturelle, mechanische und korrosive Eigenschaften. EuroHybrid, Kaiserslautern.

Bobbert, M., Augethaler, F., Wang, Z., Tröster, T., &; Meschut, G. (2016). Novel Process Approach for in-situ Insertion of Functional Elements in RTM-Applications. Journal of Materials Science Research, Article 15.https://doi.org/10.5539/jmsr.v6n1p15 

Weidenmann, K. A., Pottmeyer, F., Wang, Z., Tröster, T., Meiners, D., Zinn, C., Schaper, M., &; Gonzalez, J. S. (2016). Shear edge tests: a benchmark in investigating the influence of different surface pretreatment methods on the shear stress of intrinsically manufactured metal-CFRP hybrids. International Journal of Automotive Composites, Article 244.https://doi.org/10.1504/ijautoc.2016.10005303