Triebus, M., &; Tröster, T. (2021). HyOpt - Optimization-Based Development of Hybrid Materials. 9th NRW Nano Conference - Innovations in Materials and Applications. 9th NRW Nano Conference - Innovations in Materials and Applications, Web.

Camberg, A. A., Erhart, T., &; Tröster, T. (2021). A Generalized Stress State and Temperature Dependent Damage Indicator Framework for Ductile Failure Prediction in Heat-Assisted Forming Operations. Materials, 14(17), Article 5106.https://doi.org/10.3390/ma14175106 

Camberg, A. A. (2021). Festigkeitssteigerung von Aluminiumblechformteilen der 5000-Serie durch Erweiterung der Formgebungsgrenzen stark kaltverfestigter Ausgangswerkstoffe: Vol. 2021,52. Shaker Verlag.https://doi.org/10.2370/9783844082715 

Huber, J. (2021). Beitrag zur Reduzierung der Fehlerhäufigkeit bei der Online-Lackierung von SMC-Außenhautbauteilen: Vol. 2021,50. Shaker Verlag.

Pöhler, S. (2021). Konzeptionierung und Auslegung eines Vorderachsträgers in hybrider Leichtbauweise im C-Segment: Vol. 2021,49. Shaker Verlag.

Steinfelder, C., Martin, S., Brosius, A., &; Tröster, T. (2021). Load Path Transmission in Joining Elements. Key Engineering Materials, 73–80.https://doi.org/10.4028/www.scientific.net/kem.883.73 

Martin, S., &; Tröster, T. (2021). Joint point loadings in car bodies – the influence of manufacturing tolerances and scatter in material properties. ESAFORM 2021.https://doi.org/10.25518/esaform21.3801 

Stallmeister, T., Martin, S., Marten, T., &; Tröster, T. (2021). Experimental investigation on lightweight potentials of fiber-metal-laminates for automotive battery cases. Automotive Circle conference – Battery Systems in Car Body Engineering 2021, Bad Nauheim.

Camberg, A. A., Erhart, T., &; Tröster, T. (2021). A Generalized Stress State and Temperature Dependent Damage Indicator Framework for Ductile Failure Prediction in Heat-Assisted Forming Operations. Materials, Article 5106.https://doi.org/10.3390/ma14175106 

Andreiev, A., Hoyer, K.-P., Dula, D., Hengsbach, F., Haase, M., Gierse, J., Zimmer, D., Tröster, T., &; Schaper, M. (2021). Soft-magnetic behavior of laser beam melted FeSi3 alloy with graded cross-section. Journal of Materials Processing Technology, Article 117183.https://doi.org/10.1016/j.jmatprotec.2021.117183 

Ahlers, D. (2020). Parameter- und Prozessoptimierung für den additiven Fertigungsprozess im Pulverbett am Beispiel der Legierung Ti6Al4V  (Vol. 19). Shaker.

Hielscher, C., Grenz, J., Camberg, A. A., &; Wingenbach, N. (2020). Ansatz zur effizienteren Auslegung von Hybridbauteilen. ATZ - Automobiltechnische Zeitschrift, 60–65.https://doi.org/10.1007/s35148-020-0284-8 

Hielscher, C., Grenz, J., Camberg, A. A., &; Wingenbach, N. (2020). Approach to More Efficient Design of Hybrid Components. ATZ Worldwide, 58–61.https://doi.org/10.1007/s38311-020-0267-0 

Wu, T., Tinkloh, S. R., Tröster, T., &; Zinn, W. (2020). Residual stress measurement in GFRP/steel hybrid components. In Proceedings of the 4th International Conference Hybrid 2020 Materials and Structures. Web-Conference, Germany.

Camberg, A. A., &; Tröster, T. (2020). A simplified method for the evaluation of the layer compression test using one 3D digital image correlation system and considering the material anisotropy by the equibiaxial Lankford parameter. Presented at the International Deep-Drawing Research Group (IDDRG 2020), Seoul, South Korea.https://doi.org/10.1088/1757-899X/967/1/012077 

Camberg, A. A., Erhart, T., &; Tröster, T. (2020). Predicting fracture at non-isothermal forming conditions: A temperature dependent extension of the LS-DYNA GISSMO fracture indicator framework. Presented at the International Deep-Drawing Research Group (IDDRG 2020) , Seoul, South Korea.https://doi.org/10.13140/RG.2.2.23924.17288 

Schweizer, S., Akbulut Irmak, E. F., &; Tröster, T. (2020). Wood-based materials as a sustainable alternative for future car body construction. Future Materials, vitual.

Triebus, M., &; Tröster, T. (2020). A Holistic Approach to Optimization-Based Design of Hybrid Materials. In Proceedings 4th International Conference Hybrid Materials &; Structures. Web-Conference.

Claes, L., Baumhögger, E., Rüther, T., Gierse, J., Tröster, T., &; Henning, B. (2020). Reduction of systematic measurement deviation in acoustic absorption measurement systems. Fortschritte Der Akustik - DAGA 2020, 1077–1080.

Tinkloh, S. R., Wu, T., Tröster, T., &; Niendorf, T. (2020). Numerical investigation of the hole-drilling method applied to intrinsic manufactured metal-CFRP hybrids. Proceedings of the 4th International Conference Hybrid 2020 Materials and Structures. 4th International Conference Hybrid 2020 Materials and Structures, Web-Conference, Germany.

Wu, T., Tinkloh, S. R., Tröster, T., Zinn, W., &; Niendorf, T. (2020). Determination and Validation of Residual Stresses in CFRP/Metal Hybrid Components Using the Incremental Hole Drilling Method. Journal of Composites Science, Article 143.https://doi.org/10.3390/jcs4030143 

Huxol, A. (2020). Beitrag zur Qualitätssicherung in der additiven Fertigung individueller Produkte aus CoCr-Legierungen: Vol. 2020,42. Shaker Verlag.

Tinkloh, S. R., Wu, T., Tröster, T., &; Niendorf, T. (2020). A micromechanical-based finite element simulation of process-induced residual stresses in metal-CFRP-hybrid structures. Composite Structures, 238, Article 111926.https://doi.org/10.1016/j.compstruct.2020.111926 

Chalicheemalapalli Jayasankar, D., Stallmeister, T., Wang, Z., &; Tröster, T. (2020). MANUFACTURING OF HYBRID COMPONENTS BY VARTM-PROCESS USING NEW SEALING TECHNIQUE DEVELOPED. In J. M. Hausmann, M. Siebert, A. von Hehl, &; K. A. Weidenmann (Eds.), Hybrid 2020 Materials and Structures (pp. 167–172).

Ahlers, D., &; Tröster, T. (2019). Schlussbericht zum Vorhaben “Additive Leichtbaustrukturen für Flugzeugkomponenten”f: Verbund: KOBFS - Kostenoptimierter Baukasten für Flügelsysteme. TIB: Universität Paderborn.https://doi.org/10.2314/KXP:1695591887 

Pfeifer, F., Dietrich, A., Marten, T., Tröster, T., &; Nacke, B. (2019). Investigation on Inductive Heating of Sheet Metal for an Industrial Hot Stamping Process. In Proceedings of 7th International Conference on Hot Sheet Metal Forming of High-Performance Steel (pp. 585–593). Luleå.

Striewe, J. A., Thomas, R., Fischer, F., Wiens, T., &; Tröster, T. (2019). Energieabsorptions- und Versagensverhalten eines automobilen Seitenschwellers mit lokaler Verstärkung aus kohlenstofffaserverstärktem Kunststoff nach Alterung. Presented at the Tagung Werkstoffprüfung 2019, Sankt Augustin: DGM-Inventum GmbH .

Ahlers, D., &; Tröster, T. (2019). Performance Parameters and HIP Routes for additively manufactured titanium alloy Ti6Al4V. Maastricht: EuroPM.

Camberg, A. A., &; Hielscher, C. (2019). A holistic approach to the lightweight design of tailored structural components using the example of a hybrid A-pillar. In Aachen Body Engineering Days 2019. Aachen.

Camberg, A. A., &; Tröster, T. (2019). Challenges in fracture modeling under non-isothermal forming conditions using the example of a new forming process for aluminum blanks. In 26. Sächsische Fachtagung Umformtechnik. Dresden.

Tinkloh, S. R., Wu, T., Tröster, T., &; Niendorf, T. (2019). A micromechanical based finite element simulation of process induced residual stresses in metal-CFRP-hybrid structures. Presented at the 22nd International Conference on Composite Structures (ICC) and 1st Chinese Conference on Composite Structures (CCC), Wuhan.

Camberg, A. A., Tröster, T., Bohner, F., &; Tölle, J. (2019). Predicting plasticity and fracture of severe pre-strained EN AW-5182 by Yld2000 yield locus and Hosford-Coulomb fracture model in sheet forming applications. IOP Conference Series: Materials Science and Engineering, 651, 012057.https://doi.org/10.1088/1757-899X/651/1/012057 

Akbulut Irmak, E. F., &; Tröster, T. (2019). Fracture prediction of additively manufactured AlSi10Mg materials. Procedia Structural Integrity, 190–197.https://doi.org/10.1016/j.prostr.2019.12.101 

Akbulut Irmak, E. F., Hanses, J., Schweizer, S., &; Tröster, T. (2019). Modeling the Energy Absorption Characteristics of Wood Crash Elements. 12th European LS-DYNA Conference, Koblenz.

Marten, T., &; Tröster, T. (2019). Einsatz neuartiger Stähle und Generierung gradierter Leichtbaustrukturen im Presshärteprozess. Düsseldorf: Forschungsvereinigung Stahlanwendung e.V. im Stahl Zentrum, 0, Verlag und Vertriebsgesellschaft mbH.

Triebus, M., Bienia, S., Marten, T., Tröster, T., &; Dröder, K. (2019). Press Hardening Integrated Structuring for Hybrid Components. Presented at the 7th International Conference on Hot Sheet Metal Forming of High-Performance Steel, Lulea, Sweden: Verlag Wissenschaftliche Scripten.

Camberg, A. A., Stratmann, I., &; Tröster, T. (2019). TAILORED STACKED HYBRIDS – AN OPTIMIZATION-BASED APPROACH IN MATERIAL DESIGN FOR FURTHER IMPROVEMENT IN LIGHTWEIGHT CAR BODY STRUCTURES. In Technologies for economical and functional lightweight design. Berlin, Heidelberg.https://doi.org/10.1007/978-3-662-58206-0_12 

Stallmeister, T., Chalicheemalapalli Jayasankar, D., Wang, Z., &; Tröster, T. (2019). Self-sealing tool concept for RTM-processes. 22nd International Conference on Composite Materials (ICCM22 2019), Melbourne .

Stallmeister, T., Chalicheemalapalli Jayasankar, D., Wang, Z., &; Tröster, T. (2019). Selbstabdichtendes Werkzeugkonzept für RTM-Prozesse. Tagung Werkstoffprüfung 2019, Neu-Ulm.

Opdemom, H. (2019). Experimentelle Untersuchung einse modifzierten Nasspressverfahrens für die Herstellung von hybriden Metall-Faserverbundkunststoff-Bauteilen: Vol. 2019,35. Shaker Verlag.

Stolzenburg, M. P. (2019). Experimental Basis for an Orthotropic Failure Model for Application in Crash Simulation.https://doi.org/10.17619/UNIPB/1-572 

Camberg, A. A., Striewe, M., Tröster, T., Bohner, F., &; Tölle, J. (2019). Investigation of ductility and fracture behavior of EN AW-5182  at non-isothermal forming conditions. 5th MATFEM Conference. 5th MATFEM Conference, Schloss Hohenkammer.

Striewe, J. A., Tröster, T., Kowatz, J., Meschut, G., Grothe, R., &; Grundmeier, G. (2019). Analyse und Optimierung des Korrosions- und Alterungsverhaltens von hybriden Strukturen aus Metallen und CFK. Europäische Forschungsgesellschaft für Blechverarbeitung.

Grothe, R., Striewe, J. A., Kowatz, J., Grundmeier, G., Tröster, T., &; Meschut, G. (2019). Analyse und Optimierung des Korrosions- und Alterungsverhaltens von hybriden Strukturen aus Metallen und CFK. 39. EFB-Kolloquium, Bad Boll .

Camberg, A. A., Tröster, T., Sotirov, N., Tölle, J., &; Bohner, F. (2018). Investigation of ductility and damage characteristics of EN AW-5182  at non-isothermal forming conditions. In Materials Science and Engineering (MSE) Congress 2018. Darmstadt.

Claes, L., Zeipert, H., Koppa, P., Tröster, T., &; Henning, B. (2018). Additiv gefertigte, akustische Diffusor-Strukturen für Ultraschallanwendungen. Workshop “Messtechnische Anwendungen von Ultraschall”, Drübeck.

Camberg, A. A., Engelkemeier, K., Dietrich, J., &; Heggemann, T. (2018). Top-down design of tailored fiber-metal laminates. Lightweight Design Worldwide, 11(2), 24–29.https://doi.org/10.1007/s41777-018-0004-1 

Weiß-Borkowski, N., Lian, J., Camberg, A. A., Tröster, T., Münstermann, S., Bleck, W.,https://doi.org/10.1063/1.5035024__Richter, H. (2018). Forming limit curves ofhttps://doi.org/10.1063/1.5035024__determined in high-speed Nakajima tests and predicted by two different strain-rate-sensitive models.https://doi.org/10.1063/1.5035024 

Tasdemirci, A., Akbulut Irmak, E. F., Guzel, E., Tuzgel, F., Yucesoy, A., Sahin, S., &; Guden, M. (2018). Crushing behavior and energy absorption performance of a bio-inspired metallic structure: Experimental and numerical study. Thin-Walled Structures, 547–555.https://doi.org/10.1016/j.tws.2018.07.051 

Camberg, A. A., &; Tröster, T. (2018). Optimization-based material design of tailored stacked hybrids for further improvement in lightweight car body structures. In HYBRID - MATERIALS AND STRUCTURES 2018 - PROCEEDINGS. Bremen: DGM - Deutsche Gesellschaft für Materialkunde e.V.